drivers/cpuidle/cpuidle-big_little.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright (c) 2013 ARM/Linaro
   4  *
   5  * Authors: Daniel Lezcano <daniel.lezcano@linaro.org>
   6  *          Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
   7  *          Nicolas Pitre <nicolas.pitre@linaro.org>
   8  *
   9  * Maintainer: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
  10  * Maintainer: Daniel Lezcano <daniel.lezcano@linaro.org>
  11  */
  12 #include <linux/cpuidle.h>
  13 #include <linux/cpu_pm.h>
  14 #include <linux/slab.h>
  15 #include <linux/of.h>
  16
  17 #include <asm/cpu.h>
  18 #include <asm/cputype.h>
  19 #include <asm/cpuidle.h>
  20 #include <asm/mcpm.h>
  21 #include <asm/smp_plat.h>
  22 #include <asm/suspend.h>
  23
  24 #include "dt_idle_states.h"
  25
  26 static int bl_enter_powerdown(struct cpuidle_device *dev,
  27                               struct cpuidle_driver *drv, int idx);
  28
  29 /*
  30  * NB: Owing to current menu governor behaviour big and LITTLE
  31  * index 1 states have to define exit_latency and target_residency for
  32  * cluster state since, when all CPUs in a cluster hit it, the cluster
  33  * can be shutdown. This means that when a single CPU enters this state
  34  * the exit_latency and target_residency values are somewhat overkill.
  35  * There is no notion of cluster states in the menu governor, so CPUs
  36  * have to define CPU states where possibly the cluster will be shutdown
  37  * depending on the state of other CPUs. idle states entry and exit happen
  38  * at random times; however the cluster state provides target_residency
  39  * values as if all CPUs in a cluster enter the state at once; this is
  40  * somewhat optimistic and behaviour should be fixed either in the governor
  41  * or in the MCPM back-ends.
  42  * To make this driver 100% generic the number of states and the exit_latency
  43  * target_residency values must be obtained from device tree bindings.
  44  *
  45  * exit_latency: refers to the TC2 vexpress test chip and depends on the
  46  * current cluster operating point. It is the time it takes to get the CPU
  47  * up and running when the CPU is powered up on cluster wake-up from shutdown.
  48  * Current values for big and LITTLE clusters are provided for clusters
  49  * running at default operating points.
  50  *
  51  * target_residency: it is the minimum amount of time the cluster has
  52  * to be down to break even in terms of power consumption. cluster
  53  * shutdown has inherent dynamic power costs (L2 writebacks to DRAM
  54  * being the main factor) that depend on the current operating points.
  55  * The current values for both clusters are provided for a CPU whose half
  56  * of L2 lines are dirty and require cleaning to DRAM, and takes into
  57  * account leakage static power values related to the vexpress TC2 testchip.
  58  */
  59 static struct cpuidle_driver bl_idle_little_driver = {
  60         .name = "little_idle",
  61         .owner = THIS_MODULE,
  62         .states[0] = ARM_CPUIDLE_WFI_STATE,
  63         .states[1] = {
  64                 .enter                  = bl_enter_powerdown,
  65                 .exit_latency           = 700,
  66                 .target_residency       = 2500,
  67                 .flags                  = CPUIDLE_FLAG_TIMER_STOP,
  68                 .name                   = "C1",
  69                 .desc                   = "ARM little-cluster power down",
  70         },
  71         .state_count = 2,
  72 };
  73
  74 static const struct of_device_id bl_idle_state_match[] __initconst = {
  75         { .compatible = "arm,idle-state",
  76           .data = bl_enter_powerdown },
  77         { },
  78 };
  79
  80 static struct cpuidle_driver bl_idle_big_driver = {
  81         .name = "big_idle",
  82         .owner = THIS_MODULE,
  83         .states[0] = ARM_CPUIDLE_WFI_STATE,
  84         .states[1] = {
  85                 .enter                  = bl_enter_powerdown,
  86                 .exit_latency           = 500,
  87                 .target_residency       = 2000,
  88                 .flags                  = CPUIDLE_FLAG_TIMER_STOP,
  89                 .name                   = "C1",
  90                 .desc                   = "ARM big-cluster power down",
  91         },
  92         .state_count = 2,
  93 };
  94
  95 /*
  96  * notrace prevents trace shims from getting inserted where they
  97  * should not. Global jumps and ldrex/strex must not be inserted
  98  * in power down sequences where caches and MMU may be turned off.
  99  */
 100 static int notrace bl_powerdown_finisher(unsigned long arg)
 101 {
 102         /* MCPM works with HW CPU identifiers */
 103         unsigned int mpidr = read_cpuid_mpidr();
 104         unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 105         unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 106
 107         mcpm_set_entry_vector(cpu, cluster, cpu_resume);
 108         mcpm_cpu_suspend();
 109
 110         /* return value != 0 means failure */
 111         return 1;
 112 }
 113
 114 /**
 115  * bl_enter_powerdown - Programs CPU to enter the specified state
 116  * @dev: cpuidle device
 117  * @drv: The target state to be programmed
 118  * @idx: state index
 119  *
 120  * Called from the CPUidle framework to program the device to the
 121  * specified target state selected by the governor.
 122  */
 123 static int bl_enter_powerdown(struct cpuidle_device *dev,
 124                                 struct cpuidle_driver *drv, int idx)
 125 {
 126         cpu_pm_enter();
 127
 128         cpu_suspend(0, bl_powerdown_finisher);
 129
 130         /* signals the MCPM core that CPU is out of low power state */
 131         mcpm_cpu_powered_up();
 132
 133         cpu_pm_exit();
 134
 135         return idx;
 136 }
 137
 138 static int __init bl_idle_driver_init(struct cpuidle_driver *drv, int part_id)
 139 {
 140         struct cpumask *cpumask;
 141         int cpu;
 142
 143         cpumask = kzalloc(cpumask_size(), GFP_KERNEL);
 144         if (!cpumask)
 145                 return -ENOMEM;
 146
 147         for_each_possible_cpu(cpu)
 148                 if (smp_cpuid_part(cpu) == part_id)
 149                         cpumask_set_cpu(cpu, cpumask);
 150
 151         drv->cpumask = cpumask;
 152
 153         return 0;
 154 }
 155
 156 static const struct of_device_id compatible_machine_match[] = {
 157         { .compatible = "arm,vexpress,v2p-ca15_a7" },
 158         { .compatible = "samsung,exynos5420" },
 159         { .compatible = "samsung,exynos5800" },
 160         {},
 161 };
 162
 163 static int __init bl_idle_init(void)
 164 {
 165         int ret;
 166         struct device_node *root = of_find_node_by_path("/");
 167         const struct of_device_id *match_id;
 168
 169         if (!root)
 170                 return -ENODEV;
 171
 172         /*
 173          * Initialize the driver just for a compliant set of machines
 174          */
 175         match_id = of_match_node(compatible_machine_match, root);
 176
 177         of_node_put(root);
 178
 179         if (!match_id)
 180                 return -ENODEV;
 181
 182         if (!mcpm_is_available())
 183                 return -EUNATCH;
 184
 185         /*
 186          * For now the differentiation between little and big cores
 187          * is based on the part number. A7 cores are considered little
 188          * cores, A15 are considered big cores. This distinction may
 189          * evolve in the future with a more generic matching approach.
 190          */
 191         ret = bl_idle_driver_init(&bl_idle_little_driver,
 192                                   ARM_CPU_PART_CORTEX_A7);
 193         if (ret)
 194                 return ret;
 195
 196         ret = bl_idle_driver_init(&bl_idle_big_driver, ARM_CPU_PART_CORTEX_A15);
 197         if (ret)
 198                 goto out_uninit_little;
 199
 200         /* Start at index 1, index 0 standard WFI */
 201         ret = dt_init_idle_driver(&bl_idle_big_driver, bl_idle_state_match, 1);
 202         if (ret < 0)
 203                 goto out_uninit_big;
 204
 205         /* Start at index 1, index 0 standard WFI */
 206         ret = dt_init_idle_driver(&bl_idle_little_driver,
 207                                   bl_idle_state_match, 1);
 208         if (ret < 0)
 209                 goto out_uninit_big;
 210
 211         ret = cpuidle_register(&bl_idle_little_driver, NULL);
 212         if (ret)
 213                 goto out_uninit_big;
 214
 215         ret = cpuidle_register(&bl_idle_big_driver, NULL);
 216         if (ret)
 217                 goto out_unregister_little;
 218
 219         return 0;
 220
 221 out_unregister_little:
 222         cpuidle_unregister(&bl_idle_little_driver);
 223 out_uninit_big:
 224         kfree(bl_idle_big_driver.cpumask);
 225 out_uninit_little:
 226         kfree(bl_idle_little_driver.cpumask);
 227
 228         return ret;
 229 }
 230 device_initcall(bl_idle_init);