treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / gpu / drm / amd / display / dc / dcn10 / dcn10_init.c
blobe7e5352ec424b36aa64a62dd79c631cc611e17be
1 /*
2 * Copyright 2016 Advanced Micro Devices, Inc.
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice shall be included in
12 * all copies or substantial portions of the Software.
14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
18 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
19 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
20 * OTHER DEALINGS IN THE SOFTWARE.
22 * Authors: AMD
26 #include "hw_sequencer_private.h"
27 #include "dce110/dce110_hw_sequencer.h"
28 #include "dcn10_hw_sequencer.h"
30 static const struct hw_sequencer_funcs dcn10_funcs = {
31 .program_gamut_remap = dcn10_program_gamut_remap,
32 .init_hw = dcn10_init_hw,
33 .apply_ctx_to_hw = dce110_apply_ctx_to_hw,
34 .apply_ctx_for_surface = dcn10_apply_ctx_for_surface,
35 .update_plane_addr = dcn10_update_plane_addr,
36 .update_dchub = dcn10_update_dchub,
37 .update_pending_status = dcn10_update_pending_status,
38 .program_output_csc = dcn10_program_output_csc,
39 .enable_accelerated_mode = dce110_enable_accelerated_mode,
40 .enable_timing_synchronization = dcn10_enable_timing_synchronization,
41 .enable_per_frame_crtc_position_reset = dcn10_enable_per_frame_crtc_position_reset,
42 .update_info_frame = dce110_update_info_frame,
43 .send_immediate_sdp_message = dcn10_send_immediate_sdp_message,
44 .enable_stream = dce110_enable_stream,
45 .disable_stream = dce110_disable_stream,
46 .unblank_stream = dcn10_unblank_stream,
47 .blank_stream = dce110_blank_stream,
48 .enable_audio_stream = dce110_enable_audio_stream,
49 .disable_audio_stream = dce110_disable_audio_stream,
50 .disable_plane = dcn10_disable_plane,
51 .pipe_control_lock = dcn10_pipe_control_lock,
52 .prepare_bandwidth = dcn10_prepare_bandwidth,
53 .optimize_bandwidth = dcn10_optimize_bandwidth,
54 .set_drr = dcn10_set_drr,
55 .get_position = dcn10_get_position,
56 .set_static_screen_control = dcn10_set_static_screen_control,
57 .setup_stereo = dcn10_setup_stereo,
58 .set_avmute = dce110_set_avmute,
59 .log_hw_state = dcn10_log_hw_state,
60 .get_hw_state = dcn10_get_hw_state,
61 .clear_status_bits = dcn10_clear_status_bits,
62 .wait_for_mpcc_disconnect = dcn10_wait_for_mpcc_disconnect,
63 .edp_power_control = dce110_edp_power_control,
64 .edp_wait_for_hpd_ready = dce110_edp_wait_for_hpd_ready,
65 .set_cursor_position = dcn10_set_cursor_position,
66 .set_cursor_attribute = dcn10_set_cursor_attribute,
67 .set_cursor_sdr_white_level = dcn10_set_cursor_sdr_white_level,
68 .setup_periodic_interrupt = dcn10_setup_periodic_interrupt,
69 .set_clock = dcn10_set_clock,
70 .get_clock = dcn10_get_clock,
71 .get_vupdate_offset_from_vsync = dcn10_get_vupdate_offset_from_vsync,
74 static const struct hwseq_private_funcs dcn10_private_funcs = {
75 .init_pipes = dcn10_init_pipes,
76 .update_plane_addr = dcn10_update_plane_addr,
77 .plane_atomic_disconnect = dcn10_plane_atomic_disconnect,
78 .program_pipe = dcn10_program_pipe,
79 .update_mpcc = dcn10_update_mpcc,
80 .set_input_transfer_func = dcn10_set_input_transfer_func,
81 .set_output_transfer_func = dcn10_set_output_transfer_func,
82 .power_down = dce110_power_down,
83 .enable_display_power_gating = dcn10_dummy_display_power_gating,
84 .blank_pixel_data = dcn10_blank_pixel_data,
85 .reset_hw_ctx_wrap = dcn10_reset_hw_ctx_wrap,
86 .enable_stream_timing = dcn10_enable_stream_timing,
87 .edp_backlight_control = dce110_edp_backlight_control,
88 .disable_stream_gating = NULL,
89 .enable_stream_gating = NULL,
90 .setup_vupdate_interrupt = dcn10_setup_vupdate_interrupt,
91 .did_underflow_occur = dcn10_did_underflow_occur,
92 .init_blank = NULL,
93 .disable_vga = dcn10_disable_vga,
94 .bios_golden_init = dcn10_bios_golden_init,
95 .plane_atomic_disable = dcn10_plane_atomic_disable,
96 .plane_atomic_power_down = dcn10_plane_atomic_power_down,
97 .enable_power_gating_plane = dcn10_enable_power_gating_plane,
98 .dpp_pg_control = dcn10_dpp_pg_control,
99 .hubp_pg_control = dcn10_hubp_pg_control,
100 .dsc_pg_control = NULL,
101 .get_surface_visual_confirm_color = dcn10_get_surface_visual_confirm_color,
102 .get_hdr_visual_confirm_color = dcn10_get_hdr_visual_confirm_color,
103 .set_hdr_multiplier = dcn10_set_hdr_multiplier,
104 .verify_allow_pstate_change_high = dcn10_verify_allow_pstate_change_high,
107 void dcn10_hw_sequencer_construct(struct dc *dc)
109 dc->hwss = dcn10_funcs;
110 dc->hwseq->funcs = dcn10_private_funcs;