treewide: remove redundant IS_ERR() before error code check

[linux/fpc-iii.git] / drivers / net / wireless / intel / iwlwifi / cfg / 22000.c

/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2015-2017 Intel Deutschland GmbH
 * Copyright (C) 2018-2019 Intel Corporation
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * BSD LICENSE
 *
 * Copyright(c) 2015-2017 Intel Deutschland GmbH
 * Copyright (C) 2018-2019 Intel Corporation
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *****************************************************************************/

#include <linux/module.h>
#include <linux/stringify.h>
#include "iwl-config.h"
#include "iwl-prph.h"

/* Highest firmware API version supported */
#define IWL_22000_UCODE_API_MAX 52

/* Lowest firmware API version supported */
#define IWL_22000_UCODE_API_MIN 39

/* NVM versions */
#define IWL_22000_NVM_VERSION           0x0a1d

/* Memory offsets and lengths */
#define IWL_22000_DCCM_OFFSET           0x800000 /* LMAC1 */
#define IWL_22000_DCCM_LEN              0x10000 /* LMAC1 */
#define IWL_22000_DCCM2_OFFSET          0x880000
#define IWL_22000_DCCM2_LEN             0x8000
#define IWL_22000_SMEM_OFFSET           0x400000
#define IWL_22000_SMEM_LEN              0xD0000

#define IWL_22000_JF_FW_PRE             "iwlwifi-Qu-a0-jf-b0-"
#define IWL_22000_HR_FW_PRE             "iwlwifi-Qu-a0-hr-a0-"
#define IWL_22000_HR_CDB_FW_PRE         "iwlwifi-QuIcp-z0-hrcdb-a0-"
#define IWL_22000_HR_A_F0_FW_PRE        "iwlwifi-QuQnj-f0-hr-a0-"
#define IWL_22000_QU_B_HR_B_FW_PRE      "iwlwifi-Qu-b0-hr-b0-"
#define IWL_22000_HR_B_FW_PRE           "iwlwifi-QuQnj-b0-hr-b0-"
#define IWL_22000_HR_A0_FW_PRE          "iwlwifi-QuQnj-a0-hr-a0-"
#define IWL_QU_C_HR_B_FW_PRE            "iwlwifi-Qu-c0-hr-b0-"
#define IWL_QU_B_JF_B_FW_PRE            "iwlwifi-Qu-b0-jf-b0-"
#define IWL_QU_C_JF_B_FW_PRE            "iwlwifi-Qu-c0-jf-b0-"
#define IWL_QUZ_A_HR_B_FW_PRE           "iwlwifi-QuZ-a0-hr-b0-"
#define IWL_QUZ_A_JF_B_FW_PRE           "iwlwifi-QuZ-a0-jf-b0-"
#define IWL_QNJ_B_JF_B_FW_PRE           "iwlwifi-QuQnj-b0-jf-b0-"
#define IWL_CC_A_FW_PRE                 "iwlwifi-cc-a0-"
#define IWL_22000_SO_A_JF_B_FW_PRE      "iwlwifi-so-a0-jf-b0-"
#define IWL_22000_SO_A_HR_B_FW_PRE      "iwlwifi-so-a0-hr-b0-"
#define IWL_22000_SO_A_GF_A_FW_PRE      "iwlwifi-so-a0-gf-a0-"
#define IWL_22000_TY_A_GF_A_FW_PRE      "iwlwifi-ty-a0-gf-a0-"
#define IWL_22000_SO_A_GF4_A_FW_PRE     "iwlwifi-so-a0-gf4-a0-"
#define IWL_22000_SOSNJ_A_GF4_A_FW_PRE  "iwlwifi-SoSnj-a0-gf4-a0-"

#define IWL_22000_HR_MODULE_FIRMWARE(api) \
        IWL_22000_HR_FW_PRE __stringify(api) ".ucode"
#define IWL_22000_JF_MODULE_FIRMWARE(api) \
        IWL_22000_JF_FW_PRE __stringify(api) ".ucode"
#define IWL_22000_HR_A_F0_QNJ_MODULE_FIRMWARE(api) \
        IWL_22000_HR_A_F0_FW_PRE __stringify(api) ".ucode"
#define IWL_22000_QU_B_HR_B_MODULE_FIRMWARE(api) \
        IWL_22000_QU_B_HR_B_FW_PRE __stringify(api) ".ucode"
#define IWL_22000_HR_B_QNJ_MODULE_FIRMWARE(api) \
        IWL_22000_HR_B_FW_PRE __stringify(api) ".ucode"
#define IWL_22000_HR_A0_QNJ_MODULE_FIRMWARE(api) \
        IWL_22000_HR_A0_FW_PRE __stringify(api) ".ucode"
#define IWL_QUZ_A_HR_B_MODULE_FIRMWARE(api) \
        IWL_QUZ_A_HR_B_FW_PRE __stringify(api) ".ucode"
#define IWL_QUZ_A_JF_B_MODULE_FIRMWARE(api) \
        IWL_QUZ_A_JF_B_FW_PRE __stringify(api) ".ucode"
#define IWL_QU_C_HR_B_MODULE_FIRMWARE(api) \
        IWL_QU_C_HR_B_FW_PRE __stringify(api) ".ucode"
#define IWL_QU_B_JF_B_MODULE_FIRMWARE(api) \
        IWL_QU_B_JF_B_FW_PRE __stringify(api) ".ucode"
#define IWL_QNJ_B_JF_B_MODULE_FIRMWARE(api)             \
        IWL_QNJ_B_JF_B_FW_PRE __stringify(api) ".ucode"
#define IWL_CC_A_MODULE_FIRMWARE(api)                   \
        IWL_CC_A_FW_PRE __stringify(api) ".ucode"
#define IWL_22000_SO_A_JF_B_MODULE_FIRMWARE(api) \
        IWL_22000_SO_A_JF_B_FW_PRE __stringify(api) ".ucode"
#define IWL_22000_SO_A_HR_B_MODULE_FIRMWARE(api) \
        IWL_22000_SO_A_HR_B_FW_PRE __stringify(api) ".ucode"
#define IWL_22000_SO_A_GF_A_MODULE_FIRMWARE(api) \
        IWL_22000_SO_A_GF_A_FW_PRE __stringify(api) ".ucode"
#define IWL_22000_TY_A_GF_A_MODULE_FIRMWARE(api) \
        IWL_22000_TY_A_GF_A_FW_PRE __stringify(api) ".ucode"

static const struct iwl_base_params iwl_22000_base_params = {
        .eeprom_size = OTP_LOW_IMAGE_SIZE_32K,
        .num_of_queues = 512,
        .max_tfd_queue_size = 256,
        .shadow_ram_support = true,
        .led_compensation = 57,
        .wd_timeout = IWL_LONG_WD_TIMEOUT,
        .max_event_log_size = 512,
        .shadow_reg_enable = true,
        .pcie_l1_allowed = true,
};

static const struct iwl_base_params iwl_ax210_base_params = {
        .eeprom_size = OTP_LOW_IMAGE_SIZE_32K,
        .num_of_queues = 512,
        .max_tfd_queue_size = 65536,
        .shadow_ram_support = true,
        .led_compensation = 57,
        .wd_timeout = IWL_LONG_WD_TIMEOUT,
        .max_event_log_size = 512,
        .shadow_reg_enable = true,
        .pcie_l1_allowed = true,
};

static const struct iwl_ht_params iwl_22000_ht_params = {
        .stbc = true,
        .ldpc = true,
        .ht40_bands = BIT(NL80211_BAND_2GHZ) | BIT(NL80211_BAND_5GHZ),
};

#define IWL_DEVICE_22000_COMMON                                         \
        .ucode_api_max = IWL_22000_UCODE_API_MAX,                       \
        .ucode_api_min = IWL_22000_UCODE_API_MIN,                       \
        .led_mode = IWL_LED_RF_STATE,                                   \
        .nvm_hw_section_num = 10,                                       \
        .non_shared_ant = ANT_B,                                        \
        .dccm_offset = IWL_22000_DCCM_OFFSET,                           \
        .dccm_len = IWL_22000_DCCM_LEN,                                 \
        .dccm2_offset = IWL_22000_DCCM2_OFFSET,                         \
        .dccm2_len = IWL_22000_DCCM2_LEN,                               \
        .smem_offset = IWL_22000_SMEM_OFFSET,                           \
        .smem_len = IWL_22000_SMEM_LEN,                                 \
        .features = IWL_TX_CSUM_NETIF_FLAGS | NETIF_F_RXCSUM,           \
        .apmg_not_supported = true,                                     \
        .trans.mq_rx_supported = true,                                  \
        .vht_mu_mimo_supported = true,                                  \
        .mac_addr_from_csr = true,                                      \
        .ht_params = &iwl_22000_ht_params,                              \
        .nvm_ver = IWL_22000_NVM_VERSION,                               \
        .max_ht_ampdu_exponent = IEEE80211_HT_MAX_AMPDU_64K,            \
        .trans.use_tfh = true,                                          \
        .trans.rf_id = true,                                            \
        .trans.gen2 = true,                                             \
        .nvm_type = IWL_NVM_EXT,                                        \
        .dbgc_supported = true,                                         \
        .min_umac_error_event_table = 0x400000,                         \
        .d3_debug_data_base_addr = 0x401000,                            \
        .d3_debug_data_length = 60 * 1024,                              \
        .mon_smem_regs = {                                              \
                .write_ptr = {                                          \
                        .addr = LDBG_M2S_BUF_WPTR,                      \
                        .mask = LDBG_M2S_BUF_WPTR_VAL_MSK,              \
        },                                                              \
                .cycle_cnt = {                                          \
                        .addr = LDBG_M2S_BUF_WRAP_CNT,                  \
                        .mask = LDBG_M2S_BUF_WRAP_CNT_VAL_MSK,          \
                },                                                      \
        }

#define IWL_DEVICE_22500                                                \
        IWL_DEVICE_22000_COMMON,                                        \
        .trans.device_family = IWL_DEVICE_FAMILY_22000,                 \
        .trans.base_params = &iwl_22000_base_params,                    \
        .gp2_reg_addr = 0xa02c68,                                       \
        .mon_dram_regs = {                                              \
                .write_ptr = {                                          \
                        .addr = MON_BUFF_WRPTR_VER2,                    \
                        .mask = 0xffffffff,                             \
                },                                                      \
                .cycle_cnt = {                                          \
                        .addr = MON_BUFF_CYCLE_CNT_VER2,                \
                        .mask = 0xffffffff,                             \
                },                                                      \
        }

#define IWL_DEVICE_AX210                                                \
        IWL_DEVICE_22000_COMMON,                                        \
        .trans.umac_prph_offset = 0x300000,                             \
        .trans.device_family = IWL_DEVICE_FAMILY_AX210,                 \
        .trans.base_params = &iwl_ax210_base_params,                    \
        .min_txq_size = 128,                                            \
        .gp2_reg_addr = 0xd02c68,                                       \
        .min_256_ba_txq_size = 512,                                     \
        .mon_dram_regs = {                                              \
                .write_ptr = {                                          \
                        .addr = DBGC_CUR_DBGBUF_STATUS,                 \
                        .mask = DBGC_CUR_DBGBUF_STATUS_OFFSET_MSK,      \
                },                                                      \
                .cycle_cnt = {                                          \
                        .addr = DBGC_DBGBUF_WRAP_AROUND,                \
                        .mask = 0xffffffff,                             \
                },                                                      \
                .cur_frag = {                                           \
                        .addr = DBGC_CUR_DBGBUF_STATUS,                 \
                        .mask = DBGC_CUR_DBGBUF_STATUS_IDX_MSK,         \
                },                                                      \
        }

/*
 * If the device doesn't support HE, no need to have that many buffers.
 * 22000 devices can split multiple frames into a single RB, so fewer are
 * needed; AX210 cannot (but use smaller RBs by default) - these sizes
 * were picked according to 8 MSDUs inside 256 A-MSDUs in an A-MPDU, with
 * additional overhead to account for processing time.
 */
#define IWL_NUM_RBDS_NON_HE             512
#define IWL_NUM_RBDS_22000_HE           2048
#define IWL_NUM_RBDS_AX210_HE           4096

const struct iwl_cfg iwl_ax101_cfg_qu_hr = {
        .name = "Intel(R) Wi-Fi 6 AX101",
        .fw_name_pre = IWL_22000_QU_B_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .tx_with_siso_diversity = true,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwl_ax201_cfg_qu_hr = {
        .name = "Intel(R) Wi-Fi 6 AX201 160MHz",
        .fw_name_pre = IWL_22000_QU_B_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwl_ax101_cfg_qu_c0_hr_b0 = {
        .name = "Intel(R) Wi-Fi 6 AX101",
        .fw_name_pre = IWL_QU_C_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwl_ax201_cfg_qu_c0_hr_b0 = {
        .name = "Intel(R) Wi-Fi 6 AX201 160MHz",
        .fw_name_pre = IWL_QU_C_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwl_ax101_cfg_quz_hr = {
        .name = "Intel(R) Wi-Fi 6 AX101",
        .fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwl_ax201_cfg_quz_hr = {
        .name = "Intel(R) Wi-Fi 6 AX201 160MHz",
        .fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwl_ax1650s_cfg_quz_hr = {
        .name = "Killer(R) Wi-Fi 6 AX1650s 160MHz Wireless Network Adapter (201D2W)",
        .fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwl_ax1650i_cfg_quz_hr = {
        .name = "Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW)",
        .fw_name_pre = IWL_QUZ_A_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwl_ax200_cfg_cc = {
        .name = "Intel(R) Wi-Fi 6 AX200 160MHz",
        .fw_name_pre = IWL_CC_A_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .trans.bisr_workaround = 1,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg killer1650x_2ax_cfg = {
        .name = "Killer(R) Wi-Fi 6 AX1650x 160MHz Wireless Network Adapter (200NGW)",
        .fw_name_pre = IWL_CC_A_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .trans.bisr_workaround = 1,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg killer1650w_2ax_cfg = {
        .name = "Killer(R) Wi-Fi 6 AX1650w 160MHz Wireless Network Adapter (200D2W)",
        .fw_name_pre = IWL_CC_A_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .trans.bisr_workaround = 1,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

/*
 * All JF radio modules are part of the 9000 series, but the MAC part
 * looks more like 22000.  That's why this device is here, but called
 * 9560 nevertheless.
 */
const struct iwl_cfg iwl9461_2ac_cfg_qu_b0_jf_b0 = {
        .name = "Intel(R) Wireless-AC 9461",
        .fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9462_2ac_cfg_qu_b0_jf_b0 = {
        .name = "Intel(R) Wireless-AC 9462",
        .fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9560_2ac_cfg_qu_b0_jf_b0 = {
        .name = "Intel(R) Wireless-AC 9560",
        .fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9560_2ac_160_cfg_qu_b0_jf_b0 = {
        .name = "Intel(R) Wireless-AC 9560 160MHz",
        .fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9461_2ac_cfg_qu_c0_jf_b0 = {
        .name = "Intel(R) Wireless-AC 9461",
        .fw_name_pre = IWL_QU_C_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9462_2ac_cfg_qu_c0_jf_b0 = {
        .name = "Intel(R) Wireless-AC 9462",
        .fw_name_pre = IWL_QU_C_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9560_2ac_cfg_qu_c0_jf_b0 = {
        .name = "Intel(R) Wireless-AC 9560",
        .fw_name_pre = IWL_QU_C_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9560_2ac_160_cfg_qu_c0_jf_b0 = {
        .name = "Intel(R) Wireless-AC 9560 160MHz",
        .fw_name_pre = IWL_QU_C_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9560_2ac_cfg_qnj_jf_b0 = {
        .name = "Intel(R) Wireless-AC 9560 160MHz",
        .fw_name_pre = IWL_QNJ_B_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9560_2ac_cfg_quz_a0_jf_b0_soc = {
        .name = "Intel(R) Wireless-AC 9560 160MHz",
        .fw_name_pre = IWL_QUZ_A_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .integrated = true,
        .soc_latency = 5000,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9560_2ac_160_cfg_quz_a0_jf_b0_soc = {
        .name = "Intel(R) Wireless-AC 9560 160MHz",
        .fw_name_pre = IWL_QUZ_A_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .integrated = true,
        .soc_latency = 5000,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9461_2ac_cfg_quz_a0_jf_b0_soc = {
        .name = "Intel(R) Dual Band Wireless AC 9461",
        .fw_name_pre = IWL_QUZ_A_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .integrated = true,
        .soc_latency = 5000,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9462_2ac_cfg_quz_a0_jf_b0_soc = {
        .name = "Intel(R) Dual Band Wireless AC 9462",
        .fw_name_pre = IWL_QUZ_A_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .integrated = true,
        .soc_latency = 5000,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9560_killer_s_2ac_cfg_quz_a0_jf_b0_soc = {
        .name = "Killer (R) Wireless-AC 1550s Wireless Network Adapter (9560NGW)",
        .fw_name_pre = IWL_QUZ_A_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .integrated = true,
        .soc_latency = 5000,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwl9560_killer_i_2ac_cfg_quz_a0_jf_b0_soc = {
        .name = "Killer (R) Wireless-AC 1550i Wireless Network Adapter (9560NGW)",
        .fw_name_pre = IWL_QUZ_A_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .integrated = true,
        .soc_latency = 5000,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg killer1550i_2ac_cfg_qu_b0_jf_b0 = {
        .name = "Killer (R) Wireless-AC 1550i Wireless Network Adapter (9560NGW)",
        .fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg killer1550s_2ac_cfg_qu_b0_jf_b0 = {
        .name = "Killer (R) Wireless-AC 1550s Wireless Network Adapter (9560NGW)",
        .fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg killer1650s_2ax_cfg_qu_b0_hr_b0 = {
        .name = "Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW)",
        .fw_name_pre = IWL_22000_QU_B_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg killer1650i_2ax_cfg_qu_b0_hr_b0 = {
        .name = "Killer(R) Wi-Fi 6 AX1650s 160MHz Wireless Network Adapter (201D2W)",
        .fw_name_pre = IWL_22000_QU_B_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg killer1650s_2ax_cfg_qu_c0_hr_b0 = {
        .name = "Killer(R) Wi-Fi 6 AX1650i 160MHz Wireless Network Adapter (201NGW)",
        .fw_name_pre = IWL_QU_C_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg killer1650i_2ax_cfg_qu_c0_hr_b0 = {
        .name = "Killer(R) Wi-Fi 6 AX1650s 160MHz Wireless Network Adapter (201D2W)",
        .fw_name_pre = IWL_QU_C_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwl22000_2ax_cfg_jf = {
        .name = "Intel(R) Dual Band Wireless AX 22000",
        .fw_name_pre = IWL_QU_B_JF_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_a0_f0 = {
        .name = "Intel(R) Dual Band Wireless AX 22000",
        .fw_name_pre = IWL_22000_HR_A_F0_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_b0 = {
        .name = "Intel(R) Dual Band Wireless AX 22000",
        .fw_name_pre = IWL_22000_HR_B_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwl22000_2ax_cfg_qnj_hr_a0 = {
        .name = "Intel(R) Dual Band Wireless AX 22000",
        .fw_name_pre = IWL_22000_HR_A0_FW_PRE,
        IWL_DEVICE_22500,
        /*
         * This device doesn't support receiving BlockAck with a large bitmap
         * so we need to restrict the size of transmitted aggregation to the
         * HT size; mac80211 would otherwise pick the HE max (256) by default.
         */
        .max_tx_agg_size = IEEE80211_MAX_AMPDU_BUF_HT,
        .num_rbds = IWL_NUM_RBDS_22000_HE,
};

const struct iwl_cfg iwlax210_2ax_cfg_so_jf_a0 = {
        .name = "Intel(R) Wireless-AC 9560 160MHz",
        .fw_name_pre = IWL_22000_SO_A_JF_B_FW_PRE,
        IWL_DEVICE_AX210,
        .num_rbds = IWL_NUM_RBDS_NON_HE,
};

const struct iwl_cfg iwlax210_2ax_cfg_so_hr_a0 = {
        .name = "Intel(R) Wi-Fi 7 AX210 160MHz",
        .fw_name_pre = IWL_22000_SO_A_HR_B_FW_PRE,
        IWL_DEVICE_AX210,
        .num_rbds = IWL_NUM_RBDS_AX210_HE,
};

const struct iwl_cfg iwlax211_2ax_cfg_so_gf_a0 = {
        .name = "Intel(R) Wi-Fi 7 AX211 160MHz",
        .fw_name_pre = IWL_22000_SO_A_GF_A_FW_PRE,
        .uhb_supported = true,
        IWL_DEVICE_AX210,
        .num_rbds = IWL_NUM_RBDS_AX210_HE,
};

const struct iwl_cfg iwlax210_2ax_cfg_ty_gf_a0 = {
        .name = "Intel(R) Wi-Fi 7 AX210 160MHz",
        .fw_name_pre = IWL_22000_TY_A_GF_A_FW_PRE,
        .uhb_supported = true,
        IWL_DEVICE_AX210,
        .num_rbds = IWL_NUM_RBDS_AX210_HE,
};

const struct iwl_cfg iwlax411_2ax_cfg_so_gf4_a0 = {
        .name = "Intel(R) Wi-Fi 7 AX411 160MHz",
        .fw_name_pre = IWL_22000_SO_A_GF4_A_FW_PRE,
        .uhb_supported = true,
        IWL_DEVICE_AX210,
        .num_rbds = IWL_NUM_RBDS_AX210_HE,
};

const struct iwl_cfg iwlax411_2ax_cfg_sosnj_gf4_a0 = {
        .name = "Intel(R) Wi-Fi 7 AX411 160MHz",
        .fw_name_pre = IWL_22000_SOSNJ_A_GF4_A_FW_PRE,
        .uhb_supported = true,
        IWL_DEVICE_AX210,
        .num_rbds = IWL_NUM_RBDS_AX210_HE,
};

MODULE_FIRMWARE(IWL_22000_HR_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_22000_JF_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_22000_HR_A_F0_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_22000_HR_B_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_22000_HR_A0_QNJ_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_QU_C_HR_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_QU_B_JF_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_QUZ_A_HR_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_QUZ_A_JF_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_QNJ_B_JF_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_CC_A_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_22000_SO_A_JF_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_22000_SO_A_HR_B_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_22000_SO_A_GF_A_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL_22000_TY_A_GF_A_MODULE_FIRMWARE(IWL_22000_UCODE_API_MAX));