| blob | 28b5ce289662b8c74955ecb38e023a6b773cb7b0 |
1 /*
2 * Copyright 2012 Freescale Semiconductor, Inc.
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
12 /include/ "skeleton.dtsi"
14 / {
15 interrupt-parent = <&icoll>;
17 aliases {
18 gpio0 = &gpio0;
19 gpio1 = &gpio1;
20 gpio2 = &gpio2;
21 serial0 = &auart0;
22 serial1 = &auart1;
23 spi0 = &ssp0;
24 spi1 = &ssp1;
25 };
27 cpus {
28 #address-cells = <0>;
29 #size-cells = <0>;
31 cpu {
32 compatible = "arm,arm926ej-s";
33 device_type = "cpu";
34 };
35 };
37 apb@80000000 {
38 compatible = "simple-bus";
39 #address-cells = <1>;
40 #size-cells = <1>;
41 reg = <0x80000000 0x80000>;
42 ranges;
44 apbh@80000000 {
45 compatible = "simple-bus";
46 #address-cells = <1>;
47 #size-cells = <1>;
48 reg = <0x80000000 0x40000>;
49 ranges;
51 icoll: interrupt-controller@80000000 {
52 compatible = "fsl,imx23-icoll", "fsl,icoll";
53 interrupt-controller;
54 #interrupt-cells = <1>;
55 reg = <0x80000000 0x2000>;
56 };
58 dma_apbh: dma-apbh@80004000 {
59 compatible = "fsl,imx23-dma-apbh";
60 reg = <0x80004000 0x2000>;
61 interrupts = <0 14 20 0
62 13 13 13 13>;
63 interrupt-names = "empty", "ssp0", "ssp1", "empty",
64 "gpmi0", "gpmi1", "gpmi2", "gpmi3";
65 #dma-cells = <1>;
66 dma-channels = <8>;
67 clocks = <&clks 15>;
68 };
70 ecc@80008000 {
71 reg = <0x80008000 0x2000>;
72 status = "disabled";
73 };
75 gpmi-nand@8000c000 {
76 compatible = "fsl,imx23-gpmi-nand";
77 #address-cells = <1>;
78 #size-cells = <1>;
79 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
80 reg-names = "gpmi-nand", "bch";
81 interrupts = <56>;
82 interrupt-names = "bch";
83 clocks = <&clks 34>;
84 clock-names = "gpmi_io";
85 dmas = <&dma_apbh 4>;
86 dma-names = "rx-tx";
87 status = "disabled";
88 };
90 ssp0: ssp@80010000 {
91 reg = <0x80010000 0x2000>;
92 interrupts = <15>;
93 clocks = <&clks 33>;
94 dmas = <&dma_apbh 1>;
95 dma-names = "rx-tx";
96 status = "disabled";
97 };
99 etm@80014000 {
100 reg = <0x80014000 0x2000>;
101 status = "disabled";
102 };
104 pinctrl@80018000 {
105 #address-cells = <1>;
106 #size-cells = <0>;
107 compatible = "fsl,imx23-pinctrl", "simple-bus";
108 reg = <0x80018000 0x2000>;
110 gpio0: gpio@0 {
111 compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
112 interrupts = <16>;
113 gpio-controller;
114 #gpio-cells = <2>;
115 interrupt-controller;
116 #interrupt-cells = <2>;
117 };
119 gpio1: gpio@1 {
120 compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
121 interrupts = <17>;
122 gpio-controller;
123 #gpio-cells = <2>;
124 interrupt-controller;
125 #interrupt-cells = <2>;
126 };
128 gpio2: gpio@2 {
129 compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
130 interrupts = <18>;
131 gpio-controller;
132 #gpio-cells = <2>;
133 interrupt-controller;
134 #interrupt-cells = <2>;
135 };
137 duart_pins_a: duart@0 {
138 reg = <0>;
139 fsl,pinmux-ids = <
140 0x11a2 /* MX23_PAD_PWM0__DUART_RX */
141 0x11b2 /* MX23_PAD_PWM1__DUART_TX */
142 >;
143 fsl,drive-strength = <0>;
144 fsl,voltage = <1>;
145 fsl,pull-up = <0>;
146 };
148 auart0_pins_a: auart0@0 {
149 reg = <0>;
150 fsl,pinmux-ids = <
151 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */
152 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */
153 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */
154 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */
155 >;
156 fsl,drive-strength = <0>;
157 fsl,voltage = <1>;
158 fsl,pull-up = <0>;
159 };
161 auart0_2pins_a: auart0-2pins@0 {
162 reg = <0>;
163 fsl,pinmux-ids = <
164 0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
165 0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
166 >;
167 fsl,drive-strength = <0>;
168 fsl,voltage = <1>;
169 fsl,pull-up = <0>;
170 };
172 gpmi_pins_a: gpmi-nand@0 {
173 reg = <0>;
174 fsl,pinmux-ids = <
175 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */
176 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */
177 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */
178 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */
179 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */
180 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */
181 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */
182 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */
183 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */
184 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */
185 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */
186 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */
187 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
188 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
189 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
190 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */
191 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */
192 >;
193 fsl,drive-strength = <0>;
194 fsl,voltage = <1>;
195 fsl,pull-up = <0>;
196 };
198 gpmi_pins_fixup: gpmi-pins-fixup {
199 fsl,pinmux-ids = <
200 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */
201 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */
202 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */
203 >;
204 fsl,drive-strength = <2>;
205 };
207 mmc0_4bit_pins_a: mmc0-4bit@0 {
208 reg = <0>;
209 fsl,pinmux-ids = <
210 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
211 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
212 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
213 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
214 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
215 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
216 >;
217 fsl,drive-strength = <1>;
218 fsl,voltage = <1>;
219 fsl,pull-up = <1>;
220 };
222 mmc0_8bit_pins_a: mmc0-8bit@0 {
223 reg = <0>;
224 fsl,pinmux-ids = <
225 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */
226 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */
227 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */
228 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */
229 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */
230 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */
231 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */
232 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */
233 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */
234 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
235 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
236 >;
237 fsl,drive-strength = <1>;
238 fsl,voltage = <1>;
239 fsl,pull-up = <1>;
240 };
242 mmc0_pins_fixup: mmc0-pins-fixup {
243 fsl,pinmux-ids = <
244 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */
245 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */
246 >;
247 fsl,pull-up = <0>;
248 };
250 pwm2_pins_a: pwm2@0 {
251 reg = <0>;
252 fsl,pinmux-ids = <
253 0x11c0 /* MX23_PAD_PWM2__PWM2 */
254 >;
255 fsl,drive-strength = <0>;
256 fsl,voltage = <1>;
257 fsl,pull-up = <0>;
258 };
260 lcdif_24bit_pins_a: lcdif-24bit@0 {
261 reg = <0>;
262 fsl,pinmux-ids = <
263 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */
264 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */
265 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */
266 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */
267 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */
268 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */
269 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */
270 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */
271 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */
272 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */
273 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */
274 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */
275 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */
276 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */
277 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */
278 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */
279 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */
280 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */
281 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */
282 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */
283 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */
284 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */
285 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */
286 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */
287 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */
288 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */
289 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */
290 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */
291 >;
292 fsl,drive-strength = <0>;
293 fsl,voltage = <1>;
294 fsl,pull-up = <0>;
295 };
297 spi2_pins_a: spi2@0 {
298 reg = <0>;
299 fsl,pinmux-ids = <
300 0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */
301 0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */
302 0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */
303 0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */
304 >;
305 fsl,drive-strength = <1>;
306 fsl,voltage = <1>;
307 fsl,pull-up = <1>;
308 };
309 };
311 digctl@8001c000 {
312 compatible = "fsl,imx23-digctl";
313 reg = <0x8001c000 2000>;
314 status = "disabled";
315 };
317 emi@80020000 {
318 reg = <0x80020000 0x2000>;
319 status = "disabled";
320 };
322 dma_apbx: dma-apbx@80024000 {
323 compatible = "fsl,imx23-dma-apbx";
324 reg = <0x80024000 0x2000>;
325 interrupts = <7 5 9 26
326 19 0 25 23
327 60 58 9 0
328 0 0 0 0>;
329 interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
330 "saif0", "empty", "auart0-rx", "auart0-tx",
331 "auart1-rx", "auart1-tx", "saif1", "empty",
332 "empty", "empty", "empty", "empty";
333 #dma-cells = <1>;
334 dma-channels = <16>;
335 clocks = <&clks 16>;
336 };
338 dcp@80028000 {
339 reg = <0x80028000 0x2000>;
340 status = "disabled";
341 };
343 pxp@8002a000 {
344 reg = <0x8002a000 0x2000>;
345 status = "disabled";
346 };
348 ocotp@8002c000 {
349 compatible = "fsl,ocotp";
350 reg = <0x8002c000 0x2000>;
351 status = "disabled";
352 };
354 axi-ahb@8002e000 {
355 reg = <0x8002e000 0x2000>;
356 status = "disabled";
357 };
359 lcdif@80030000 {
360 compatible = "fsl,imx23-lcdif";
361 reg = <0x80030000 2000>;
362 interrupts = <46 45>;
363 clocks = <&clks 38>;
364 status = "disabled";
365 };
367 ssp1: ssp@80034000 {
368 reg = <0x80034000 0x2000>;
369 interrupts = <2>;
370 clocks = <&clks 33>;
371 dmas = <&dma_apbh 2>;
372 dma-names = "rx-tx";
373 status = "disabled";
374 };
376 tvenc@80038000 {
377 reg = <0x80038000 0x2000>;
378 status = "disabled";
379 };
380 };
382 apbx@80040000 {
383 compatible = "simple-bus";
384 #address-cells = <1>;
385 #size-cells = <1>;
386 reg = <0x80040000 0x40000>;
387 ranges;
389 clks: clkctrl@80040000 {
390 compatible = "fsl,imx23-clkctrl", "fsl,clkctrl";
391 reg = <0x80040000 0x2000>;
392 #clock-cells = <1>;
393 };
395 saif0: saif@80042000 {
396 reg = <0x80042000 0x2000>;
397 dmas = <&dma_apbx 4>;
398 dma-names = "rx-tx";
399 status = "disabled";
400 };
402 power@80044000 {
403 reg = <0x80044000 0x2000>;
404 status = "disabled";
405 };
407 saif1: saif@80046000 {
408 reg = <0x80046000 0x2000>;
409 dmas = <&dma_apbx 10>;
410 dma-names = "rx-tx";
411 status = "disabled";
412 };
414 audio-out@80048000 {
415 reg = <0x80048000 0x2000>;
416 dmas = <&dma_apbx 1>;
417 dma-names = "tx";
418 status = "disabled";
419 };
421 audio-in@8004c000 {
422 reg = <0x8004c000 0x2000>;
423 dmas = <&dma_apbx 0>;
424 dma-names = "rx";
425 status = "disabled";
426 };
428 lradc@80050000 {
429 compatible = "fsl,imx23-lradc";
430 reg = <0x80050000 0x2000>;
431 interrupts = <36 37 38 39 40 41 42 43 44>;
432 status = "disabled";
433 };
435 spdif@80054000 {
436 reg = <0x80054000 2000>;
437 dmas = <&dma_apbx 2>;
438 dma-names = "tx";
439 status = "disabled";
440 };
442 i2c@80058000 {
443 reg = <0x80058000 0x2000>;
444 dmas = <&dma_apbx 3>;
445 dma-names = "rx-tx";
446 status = "disabled";
447 };
449 rtc@8005c000 {
450 compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
451 reg = <0x8005c000 0x2000>;
452 interrupts = <22>;
453 };
455 pwm: pwm@80064000 {
456 compatible = "fsl,imx23-pwm";
457 reg = <0x80064000 0x2000>;
458 clocks = <&clks 30>;
459 #pwm-cells = <2>;
460 fsl,pwm-number = <5>;
461 status = "disabled";
462 };
464 timrot@80068000 {
465 compatible = "fsl,imx23-timrot", "fsl,timrot";
466 reg = <0x80068000 0x2000>;
467 interrupts = <28 29 30 31>;
468 clocks = <&clks 28>;
469 };
471 auart0: serial@8006c000 {
472 compatible = "fsl,imx23-auart";
473 reg = <0x8006c000 0x2000>;
474 interrupts = <24>;
475 clocks = <&clks 32>;
476 dmas = <&dma_apbx 6>, <&dma_apbx 7>;
477 dma-names = "rx", "tx";
478 status = "disabled";
479 };
481 auart1: serial@8006e000 {
482 compatible = "fsl,imx23-auart";
483 reg = <0x8006e000 0x2000>;
484 interrupts = <59>;
485 clocks = <&clks 32>;
486 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
487 dma-names = "rx", "tx";
488 status = "disabled";
489 };
491 duart: serial@80070000 {
492 compatible = "arm,pl011", "arm,primecell";
493 reg = <0x80070000 0x2000>;
494 interrupts = <0>;
495 clocks = <&clks 32>, <&clks 16>;
496 clock-names = "uart", "apb_pclk";
497 status = "disabled";
498 };
500 usbphy0: usbphy@8007c000 {
501 compatible = "fsl,imx23-usbphy";
502 reg = <0x8007c000 0x2000>;
503 clocks = <&clks 41>;
504 status = "disabled";
505 };
506 };
507 };
509 ahb@80080000 {
510 compatible = "simple-bus";
511 #address-cells = <1>;
512 #size-cells = <1>;
513 reg = <0x80080000 0x80000>;
514 ranges;
516 usb0: usb@80080000 {
517 compatible = "fsl,imx23-usb", "fsl,imx27-usb";
518 reg = <0x80080000 0x40000>;
519 interrupts = <11>;
520 fsl,usbphy = <&usbphy0>;
521 clocks = <&clks 40>;
522 status = "disabled";
523 };
524 };
525 };