arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
   4  */
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7
   8 / {
   9         model = "Phytec phyFLEX-i.MX6 Quad";
  10         compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
  11
  12         memory@10000000 {
  13                 device_type = "memory";
  14                 reg = <0x10000000 0x80000000>;
  15         };
  16
  17         regulators {
  18                 compatible = "simple-bus";
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21
  22                 reg_usb_otg_vbus: regulator@0 {
  23                         compatible = "regulator-fixed";
  24                         reg = <0>;
  25                         regulator-name = "usb_otg_vbus";
  26                         regulator-min-microvolt = <5000000>;
  27                         regulator-max-microvolt = <5000000>;
  28                         gpio = <&gpio4 15 0>;
  29                         enable-active-high;
  30                 };
  31
  32                 reg_usb_h1_vbus: regulator@1 {
  33                         compatible = "regulator-fixed";
  34                         reg = <1>;
  35                         regulator-name = "usb_h1_vbus";
  36                         regulator-min-microvolt = <5000000>;
  37                         regulator-max-microvolt = <5000000>;
  38                         gpio = <&gpio1 0 0>;
  39                         enable-active-high;
  40                 };
  41         };
  42
  43         gpio_leds: leds {
  44                 compatible = "gpio-leds";
  45
  46                 green {
  47                         label = "phyflex:green";
  48                         gpios = <&gpio1 30 0>;
  49                 };
  50
  51                 red {
  52                         label = "phyflex:red";
  53                         gpios = <&gpio2 31 0>;
  54                 };
  55         };
  56 };
  57
  58 &audmux {
  59         pinctrl-names = "default";
  60         pinctrl-0 = <&pinctrl_audmux>;
  61         status = "disabled";
  62 };
  63
  64 &can1 {
  65         pinctrl-names = "default";
  66         pinctrl-0 = <&pinctrl_flexcan1>;
  67         status = "disabled";
  68 };
  69
  70 &ecspi3 {
  71         pinctrl-names = "default";
  72         pinctrl-0 = <&pinctrl_ecspi3>;
  73         status = "okay";
  74         cs-gpios = <&gpio4 24 0>;
  75
  76         som_flash: flash@0 {
  77                 compatible = "m25p80", "jedec,spi-nor";
  78                 spi-max-frequency = <20000000>;
  79                 reg = <0>;
  80         };
  81 };
  82
  83 &fec {
  84         pinctrl-names = "default";
  85         pinctrl-0 = <&pinctrl_enet>;
  86         phy-handle = <&ethphy>;
  87         phy-mode = "rgmii";
  88         phy-reset-duration = <10>; /* in msecs */
  89         phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
  90         phy-supply = <&vdd_eth_io_reg>;
  91         status = "disabled";
  92
  93         fec_mdio: mdio {
  94                 #address-cells = <1>;
  95                 #size-cells = <0>;
  96
  97                 ethphy: ethernet-phy@0 {
  98                         compatible = "ethernet-phy-ieee802.3-c22";
  99                         reg = <0>;
 100                         txc-skew-ps = <1680>;
 101                         rxc-skew-ps = <1860>;
 102                 };
 103         };
 104 };
 105
 106 &gpmi {
 107         pinctrl-names = "default";
 108         pinctrl-0 = <&pinctrl_gpmi_nand>;
 109         nand-on-flash-bbt;
 110         status = "okay";
 111 };
 112
 113 &i2c1 {
 114         pinctrl-names = "default";
 115         pinctrl-0 = <&pinctrl_i2c1>;
 116         status = "okay";
 117
 118         som_eeprom: eeprom@50 {
 119                 compatible = "atmel,24c32";
 120                 reg = <0x50>;
 121         };
 122
 123         pmic@58 {
 124                 compatible = "dlg,da9063";
 125                 reg = <0x58>;
 126                 interrupt-parent = <&gpio2>;
 127                 interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
 128                 interrupt-controller;
 129
 130                 regulators {
 131                         vddcore_reg: bcore1 {
 132                                 regulator-min-microvolt = <730000>;
 133                                 regulator-max-microvolt = <1380000>;
 134                                 regulator-always-on;
 135                         };
 136
 137                         vddsoc_reg: bcore2 {
 138                                 regulator-min-microvolt = <730000>;
 139                                 regulator-max-microvolt = <1380000>;
 140                                 regulator-always-on;
 141                         };
 142
 143                         vdd_ddr3_reg: bpro {
 144                                 regulator-min-microvolt = <1500000>;
 145                                 regulator-max-microvolt = <1500000>;
 146                                 regulator-always-on;
 147                         };
 148
 149                         vdd_3v3_reg: bperi {
 150                                 regulator-min-microvolt = <3300000>;
 151                                 regulator-max-microvolt = <3300000>;
 152                                 regulator-always-on;
 153                         };
 154
 155                         vdd_buckmem_reg: bmem {
 156                                 regulator-min-microvolt = <3300000>;
 157                                 regulator-max-microvolt = <3300000>;
 158                                 regulator-always-on;
 159                         };
 160
 161                         vdd_eth_reg: bio {
 162                                 regulator-min-microvolt = <1200000>;
 163                                 regulator-max-microvolt = <1200000>;
 164                                 regulator-always-on;
 165                         };
 166
 167                         vdd_eth_io_reg: ldo4 {
 168                                 regulator-min-microvolt = <2500000>;
 169                                 regulator-max-microvolt = <2500000>;
 170                                 regulator-always-on;
 171                         };
 172
 173                         vdd_mx6_snvs_reg: ldo5 {
 174                                 regulator-min-microvolt = <3000000>;
 175                                 regulator-max-microvolt = <3000000>;
 176                                 regulator-always-on;
 177                         };
 178
 179                         vdd_3v3_pmic_io_reg: ldo6 {
 180                                 regulator-min-microvolt = <3300000>;
 181                                 regulator-max-microvolt = <3300000>;
 182                                 regulator-always-on;
 183                         };
 184
 185                         vdd_sd0_reg: ldo9 {
 186                                 regulator-min-microvolt = <3300000>;
 187                                 regulator-max-microvolt = <3300000>;
 188                         };
 189
 190                         vdd_sd1_reg: ldo10 {
 191                                 regulator-min-microvolt = <3300000>;
 192                                 regulator-max-microvolt = <3300000>;
 193                         };
 194
 195                         vdd_mx6_high_reg: ldo11 {
 196                                 regulator-min-microvolt = <3000000>;
 197                                 regulator-max-microvolt = <3000000>;
 198                                 regulator-always-on;
 199                         };
 200                 };
 201         };
 202 };
 203
 204 &i2c2 {
 205         pinctrl-names = "default";
 206         pinctrl-0 = <&pinctrl_i2c2>;
 207         clock-frequency = <100000>;
 208 };
 209
 210 &i2c3 {
 211         pinctrl-names = "default";
 212         pinctrl-0 = <&pinctrl_i2c3>;
 213         clock-frequency = <100000>;
 214 };
 215
 216 &iomuxc {
 217         pinctrl-names = "default";
 218         pinctrl-0 = <&pinctrl_hog>;
 219
 220         imx6q-phytec-pfla02 {
 221                 pinctrl_hog: hoggrp {
 222                         fsl,pins = <
 223                                 MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
 224                                 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
 225                                 MX6QDL_PAD_SD4_DAT1__GPIO2_IO09  0x80000000 /* PMIC interrupt */
 226                                 MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
 227                                 MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
 228                         >;
 229                 };
 230
 231                 pinctrl_ecspi3: ecspi3grp {
 232                         fsl,pins = <
 233                                 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
 234                                 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
 235                                 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
 236                         >;
 237                 };
 238
 239                 pinctrl_enet: enetgrp {
 240                         fsl,pins = <
 241                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 242                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 243                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 244                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 245                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 246                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 247                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 248                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 249                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 250                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 251                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 252                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 253                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 254                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 255                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 256                                 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
 257                         >;
 258                 };
 259
 260                 pinctrl_flexcan1: flexcan1grp {
 261                         fsl,pins = <
 262                                 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b0
 263                                 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b0
 264                         >;
 265                 };
 266
 267                 pinctrl_gpmi_nand: gpminandgrp {
 268                         fsl,pins = <
 269                                 MX6QDL_PAD_NANDF_CLE__NAND_CLE          0xb0b1
 270                                 MX6QDL_PAD_NANDF_ALE__NAND_ALE          0xb0b1
 271                                 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B        0xb0b1
 272                                 MX6QDL_PAD_NANDF_RB0__NAND_READY_B      0xb000
 273                                 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B        0xb0b1
 274                                 MX6QDL_PAD_NANDF_CS1__NAND_CE1_B        0xb0b1
 275                                 MX6QDL_PAD_SD4_CMD__NAND_RE_B           0xb0b1
 276                                 MX6QDL_PAD_SD4_CLK__NAND_WE_B           0xb0b1
 277                                 MX6QDL_PAD_NANDF_D0__NAND_DATA00        0xb0b1
 278                                 MX6QDL_PAD_NANDF_D1__NAND_DATA01        0xb0b1
 279                                 MX6QDL_PAD_NANDF_D2__NAND_DATA02        0xb0b1
 280                                 MX6QDL_PAD_NANDF_D3__NAND_DATA03        0xb0b1
 281                                 MX6QDL_PAD_NANDF_D4__NAND_DATA04        0xb0b1
 282                                 MX6QDL_PAD_NANDF_D5__NAND_DATA05        0xb0b1
 283                                 MX6QDL_PAD_NANDF_D6__NAND_DATA06        0xb0b1
 284                                 MX6QDL_PAD_NANDF_D7__NAND_DATA07        0xb0b1
 285                                 MX6QDL_PAD_SD4_DAT0__NAND_DQS           0x00b1
 286                         >;
 287                 };
 288
 289                 pinctrl_i2c1: i2c1grp {
 290                         fsl,pins = <
 291                                 MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 292                                 MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 293                         >;
 294                 };
 295
 296                 pinctrl_i2c2: i2c2grp {
 297                         fsl,pins = <
 298                                 MX6QDL_PAD_EIM_EB2__I2C2_SCL            0x4001b8b1
 299                                 MX6QDL_PAD_EIM_D16__I2C2_SDA            0x4001b8b1
 300                         >;
 301                 };
 302
 303                 pinctrl_i2c3: i2c3grp {
 304                         fsl,pins = <
 305                                 MX6QDL_PAD_EIM_D17__I2C3_SCL            0x4001b8b1
 306                                 MX6QDL_PAD_EIM_D18__I2C3_SDA            0x4001b8b1
 307                         >;
 308                 };
 309
 310                 pinctrl_pcie: pciegrp {
 311                         fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
 312                 };
 313
 314                 pinctrl_uart3: uart3grp {
 315                         fsl,pins = <
 316                                 MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
 317                                 MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
 318                                 MX6QDL_PAD_EIM_D30__UART3_RTS_B         0x1b0b1
 319                                 MX6QDL_PAD_EIM_D31__UART3_CTS_B         0x1b0b1
 320                         >;
 321                 };
 322
 323                 pinctrl_uart4: uart4grp {
 324                         fsl,pins = <
 325                                 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA      0x1b0b1
 326                                 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA      0x1b0b1
 327                         >;
 328                 };
 329
 330                 pinctrl_usbh1: usbh1grp {
 331                         fsl,pins = <
 332                                 MX6QDL_PAD_GPIO_0__USB_H1_PWR           0x80000000
 333                         >;
 334                 };
 335
 336                 pinctrl_usbotg: usbotggrp {
 337                         fsl,pins = <
 338                                 MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
 339                                 MX6QDL_PAD_KEY_COL4__USB_OTG_OC         0x1b0b0
 340                                 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x80000000
 341                         >;
 342                 };
 343
 344                 pinctrl_usdhc2: usdhc2grp {
 345                         fsl,pins = <
 346                                 MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 347                                 MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 348                                 MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 349                                 MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 350                                 MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 351                                 MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 352                         >;
 353                 };
 354
 355                 pinctrl_usdhc3: usdhc3grp {
 356                         fsl,pins = <
 357                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 358                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 359                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 360                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 361                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 362                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 363                         >;
 364                 };
 365
 366                 pinctrl_usdhc3_cdwp: usdhc3cdwp {
 367                         fsl,pins = <
 368                                 MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
 369                                 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
 370                         >;
 371                 };
 372
 373                 pinctrl_audmux: audmuxgrp {
 374                         fsl,pins = <
 375                                 MX6QDL_PAD_DISP0_DAT16__AUD5_TXC        0x130b0
 376                                 MX6QDL_PAD_DISP0_DAT17__AUD5_TXD        0x110b0
 377                                 MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS       0x130b0
 378                                 MX6QDL_PAD_DISP0_DAT19__AUD5_RXD        0x130b0
 379                         >;
 380                 };
 381         };
 382 };
 383
 384 &pcie {
 385         pinctrl-names = "default";
 386         pinctrl-0 = <&pinctrl_pcie>;
 387         reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>;
 388         status = "disabled";
 389 };
 390
 391 &reg_arm {
 392         vin-supply = <&vddcore_reg>;
 393 };
 394
 395 &reg_pu {
 396         vin-supply = <&vddsoc_reg>;
 397 };
 398
 399 &reg_soc {
 400         vin-supply = <&vddsoc_reg>;
 401 };
 402
 403 &uart3 {
 404         pinctrl-names = "default";
 405         pinctrl-0 = <&pinctrl_uart3>;
 406         status = "disabled";
 407 };
 408
 409 &uart4 {
 410         pinctrl-names = "default";
 411         pinctrl-0 = <&pinctrl_uart4>;
 412         status = "disabled";
 413 };
 414
 415 &usbh1 {
 416         vbus-supply = <&reg_usb_h1_vbus>;
 417         pinctrl-names = "default";
 418         pinctrl-0 = <&pinctrl_usbh1>;
 419         status = "disabled";
 420 };
 421
 422 &usbotg {
 423         vbus-supply = <&reg_usb_otg_vbus>;
 424         pinctrl-names = "default";
 425         pinctrl-0 = <&pinctrl_usbotg>;
 426         disable-over-current;
 427         status = "disabled";
 428 };
 429
 430 &usdhc2 {
 431         pinctrl-names = "default";
 432         pinctrl-0 = <&pinctrl_usdhc2>;
 433         cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 434         wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 435         status = "disabled";
 436 };
 437
 438 &usdhc3 {
 439         pinctrl-names = "default";
 440         pinctrl-0 = <&pinctrl_usdhc3
 441                      &pinctrl_usdhc3_cdwp>;
 442         cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 443         wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 444         status = "disabled";
 445 };