arch/arm/boot/dts/rk3xxx.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2013 MundoReader S.L.
   4  * Author: Heiko Stuebner <heiko@sntech.de>
   5  */
   6
   7 #include <dt-bindings/interrupt-controller/irq.h>
   8 #include <dt-bindings/interrupt-controller/arm-gic.h>
   9 #include <dt-bindings/soc/rockchip,boot-mode.h>
  10
  11 / {
  12         #address-cells = <1>;
  13         #size-cells = <1>;
  14
  15         interrupt-parent = <&gic>;
  16
  17         aliases {
  18                 ethernet0 = &emac;
  19                 i2c0 = &i2c0;
  20                 i2c1 = &i2c1;
  21                 i2c2 = &i2c2;
  22                 i2c3 = &i2c3;
  23                 i2c4 = &i2c4;
  24                 mshc0 = &emmc;
  25                 mshc1 = &mmc0;
  26                 mshc2 = &mmc1;
  27                 serial0 = &uart0;
  28                 serial1 = &uart1;
  29                 serial2 = &uart2;
  30                 serial3 = &uart3;
  31                 spi0 = &spi0;
  32                 spi1 = &spi1;
  33         };
  34
  35         amba {
  36                 compatible = "simple-bus";
  37                 #address-cells = <1>;
  38                 #size-cells = <1>;
  39                 ranges;
  40
  41                 dmac1_s: dma-controller@20018000 {
  42                         compatible = "arm,pl330", "arm,primecell";
  43                         reg = <0x20018000 0x4000>;
  44                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
  45                                      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
  46                         #dma-cells = <1>;
  47                         arm,pl330-broken-no-flushp;
  48                         clocks = <&cru ACLK_DMA1>;
  49                         clock-names = "apb_pclk";
  50                 };
  51
  52                 dmac1_ns: dma-controller@2001c000 {
  53                         compatible = "arm,pl330", "arm,primecell";
  54                         reg = <0x2001c000 0x4000>;
  55                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
  56                                      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
  57                         #dma-cells = <1>;
  58                         arm,pl330-broken-no-flushp;
  59                         clocks = <&cru ACLK_DMA1>;
  60                         clock-names = "apb_pclk";
  61                         status = "disabled";
  62                 };
  63
  64                 dmac2: dma-controller@20078000 {
  65                         compatible = "arm,pl330", "arm,primecell";
  66                         reg = <0x20078000 0x4000>;
  67                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
  68                                      <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
  69                         #dma-cells = <1>;
  70                         arm,pl330-broken-no-flushp;
  71                         clocks = <&cru ACLK_DMA2>;
  72                         clock-names = "apb_pclk";
  73                 };
  74         };
  75
  76         xin24m: oscillator {
  77                 compatible = "fixed-clock";
  78                 clock-frequency = <24000000>;
  79                 #clock-cells = <0>;
  80                 clock-output-names = "xin24m";
  81         };
  82
  83         gpu: gpu@10090000 {
  84                 compatible = "arm,mali-400";
  85                 reg = <0x10090000 0x10000>;
  86                 clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
  87                 clock-names = "core", "bus";
  88                 assigned-clocks = <&cru ACLK_GPU>;
  89                 assigned-clock-rates = <100000000>;
  90                 resets = <&cru SRST_GPU>;
  91                 status = "disabled";
  92         };
  93
  94         L2: l2-cache-controller@10138000 {
  95                 compatible = "arm,pl310-cache";
  96                 reg = <0x10138000 0x1000>;
  97                 cache-unified;
  98                 cache-level = <2>;
  99         };
 100
 101         scu@1013c000 {
 102                 compatible = "arm,cortex-a9-scu";
 103                 reg = <0x1013c000 0x100>;
 104         };
 105
 106         global_timer: global-timer@1013c200 {
 107                 compatible = "arm,cortex-a9-global-timer";
 108                 reg = <0x1013c200 0x20>;
 109                 interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 110                 clocks = <&cru CORE_PERI>;
 111         };
 112
 113         local_timer: local-timer@1013c600 {
 114                 compatible = "arm,cortex-a9-twd-timer";
 115                 reg = <0x1013c600 0x20>;
 116                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 117                 clocks = <&cru CORE_PERI>;
 118         };
 119
 120         gic: interrupt-controller@1013d000 {
 121                 compatible = "arm,cortex-a9-gic";
 122                 interrupt-controller;
 123                 #interrupt-cells = <3>;
 124                 reg = <0x1013d000 0x1000>,
 125                       <0x1013c100 0x0100>;
 126         };
 127
 128         uart0: serial@10124000 {
 129                 compatible = "snps,dw-apb-uart";
 130                 reg = <0x10124000 0x400>;
 131                 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 132                 reg-shift = <2>;
 133                 reg-io-width = <1>;
 134                 clock-names = "baudclk", "apb_pclk";
 135                 clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
 136                 status = "disabled";
 137         };
 138
 139         uart1: serial@10126000 {
 140                 compatible = "snps,dw-apb-uart";
 141                 reg = <0x10126000 0x400>;
 142                 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 143                 reg-shift = <2>;
 144                 reg-io-width = <1>;
 145                 clock-names = "baudclk", "apb_pclk";
 146                 clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
 147                 status = "disabled";
 148         };
 149
 150         qos_gpu: qos@1012d000 {
 151                 compatible = "syscon";
 152                 reg = <0x1012d000 0x20>;
 153         };
 154
 155         qos_vpu: qos@1012e000 {
 156                 compatible = "syscon";
 157                 reg = <0x1012e000 0x20>;
 158         };
 159
 160         qos_lcdc0: qos@1012f000 {
 161                 compatible = "syscon";
 162                 reg = <0x1012f000 0x20>;
 163         };
 164
 165         qos_cif0: qos@1012f080 {
 166                 compatible = "syscon";
 167                 reg = <0x1012f080 0x20>;
 168         };
 169
 170         qos_ipp: qos@1012f100 {
 171                 compatible = "syscon";
 172                 reg = <0x1012f100 0x20>;
 173         };
 174
 175         qos_lcdc1: qos@1012f180 {
 176                 compatible = "syscon";
 177                 reg = <0x1012f180 0x20>;
 178         };
 179
 180         qos_cif1: qos@1012f200 {
 181                 compatible = "syscon";
 182                 reg = <0x1012f200 0x20>;
 183         };
 184
 185         qos_rga: qos@1012f280 {
 186                 compatible = "syscon";
 187                 reg = <0x1012f280 0x20>;
 188         };
 189
 190         usb_otg: usb@10180000 {
 191                 compatible = "rockchip,rk3066-usb", "snps,dwc2";
 192                 reg = <0x10180000 0x40000>;
 193                 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 194                 clocks = <&cru HCLK_OTG0>;
 195                 clock-names = "otg";
 196                 dr_mode = "otg";
 197                 g-np-tx-fifo-size = <16>;
 198                 g-rx-fifo-size = <275>;
 199                 g-tx-fifo-size = <256 128 128 64 64 32>;
 200                 phys = <&usbphy0>;
 201                 phy-names = "usb2-phy";
 202                 status = "disabled";
 203         };
 204
 205         usb_host: usb@101c0000 {
 206                 compatible = "snps,dwc2";
 207                 reg = <0x101c0000 0x40000>;
 208                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 209                 clocks = <&cru HCLK_OTG1>;
 210                 clock-names = "otg";
 211                 dr_mode = "host";
 212                 phys = <&usbphy1>;
 213                 phy-names = "usb2-phy";
 214                 status = "disabled";
 215         };
 216
 217         emac: ethernet@10204000 {
 218                 compatible = "snps,arc-emac";
 219                 reg = <0x10204000 0x3c>;
 220                 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 221                 #address-cells = <1>;
 222                 #size-cells = <0>;
 223
 224                 rockchip,grf = <&grf>;
 225
 226                 clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
 227                 clock-names = "hclk", "macref";
 228                 max-speed = <100>;
 229                 phy-mode = "rmii";
 230
 231                 status = "disabled";
 232         };
 233
 234         mmc0: mmc@10214000 {
 235                 compatible = "rockchip,rk2928-dw-mshc";
 236                 reg = <0x10214000 0x1000>;
 237                 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 238                 clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
 239                 clock-names = "biu", "ciu";
 240                 dmas = <&dmac2 1>;
 241                 dma-names = "rx-tx";
 242                 fifo-depth = <256>;
 243                 resets = <&cru SRST_SDMMC>;
 244                 reset-names = "reset";
 245                 status = "disabled";
 246         };
 247
 248         mmc1: mmc@10218000 {
 249                 compatible = "rockchip,rk2928-dw-mshc";
 250                 reg = <0x10218000 0x1000>;
 251                 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 252                 clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
 253                 clock-names = "biu", "ciu";
 254                 dmas = <&dmac2 3>;
 255                 dma-names = "rx-tx";
 256                 fifo-depth = <256>;
 257                 resets = <&cru SRST_SDIO>;
 258                 reset-names = "reset";
 259                 status = "disabled";
 260         };
 261
 262         emmc: mmc@1021c000 {
 263                 compatible = "rockchip,rk2928-dw-mshc";
 264                 reg = <0x1021c000 0x1000>;
 265                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 266                 clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
 267                 clock-names = "biu", "ciu";
 268                 dmas = <&dmac2 4>;
 269                 dma-names = "rx-tx";
 270                 fifo-depth = <256>;
 271                 resets = <&cru SRST_EMMC>;
 272                 reset-names = "reset";
 273                 status = "disabled";
 274         };
 275
 276         pmu: pmu@20004000 {
 277                 compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
 278                 reg = <0x20004000 0x100>;
 279
 280                 reboot-mode {
 281                         compatible = "syscon-reboot-mode";
 282                         offset = <0x40>;
 283                         mode-normal = <BOOT_NORMAL>;
 284                         mode-recovery = <BOOT_RECOVERY>;
 285                         mode-bootloader = <BOOT_FASTBOOT>;
 286                         mode-loader = <BOOT_BL_DOWNLOAD>;
 287                 };
 288         };
 289
 290         grf: grf@20008000 {
 291                 compatible = "syscon";
 292                 reg = <0x20008000 0x200>;
 293         };
 294
 295         i2c0: i2c@2002d000 {
 296                 compatible = "rockchip,rk3066-i2c";
 297                 reg = <0x2002d000 0x1000>;
 298                 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 299                 #address-cells = <1>;
 300                 #size-cells = <0>;
 301
 302                 rockchip,grf = <&grf>;
 303
 304                 clock-names = "i2c";
 305                 clocks = <&cru PCLK_I2C0>;
 306
 307                 status = "disabled";
 308         };
 309
 310         i2c1: i2c@2002f000 {
 311                 compatible = "rockchip,rk3066-i2c";
 312                 reg = <0x2002f000 0x1000>;
 313                 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 314                 #address-cells = <1>;
 315                 #size-cells = <0>;
 316
 317                 rockchip,grf = <&grf>;
 318
 319                 clocks = <&cru PCLK_I2C1>;
 320                 clock-names = "i2c";
 321
 322                 status = "disabled";
 323         };
 324
 325         pwm0: pwm@20030000 {
 326                 compatible = "rockchip,rk2928-pwm";
 327                 reg = <0x20030000 0x10>;
 328                 #pwm-cells = <2>;
 329                 clocks = <&cru PCLK_PWM01>;
 330                 status = "disabled";
 331         };
 332
 333         pwm1: pwm@20030010 {
 334                 compatible = "rockchip,rk2928-pwm";
 335                 reg = <0x20030010 0x10>;
 336                 #pwm-cells = <2>;
 337                 clocks = <&cru PCLK_PWM01>;
 338                 status = "disabled";
 339         };
 340
 341         wdt: watchdog@2004c000 {
 342                 compatible = "snps,dw-wdt";
 343                 reg = <0x2004c000 0x100>;
 344                 clocks = <&cru PCLK_WDT>;
 345                 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 346                 status = "disabled";
 347         };
 348
 349         pwm2: pwm@20050020 {
 350                 compatible = "rockchip,rk2928-pwm";
 351                 reg = <0x20050020 0x10>;
 352                 #pwm-cells = <2>;
 353                 clocks = <&cru PCLK_PWM23>;
 354                 status = "disabled";
 355         };
 356
 357         pwm3: pwm@20050030 {
 358                 compatible = "rockchip,rk2928-pwm";
 359                 reg = <0x20050030 0x10>;
 360                 #pwm-cells = <2>;
 361                 clocks = <&cru PCLK_PWM23>;
 362                 status = "disabled";
 363         };
 364
 365         i2c2: i2c@20056000 {
 366                 compatible = "rockchip,rk3066-i2c";
 367                 reg = <0x20056000 0x1000>;
 368                 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 369                 #address-cells = <1>;
 370                 #size-cells = <0>;
 371
 372                 rockchip,grf = <&grf>;
 373
 374                 clocks = <&cru PCLK_I2C2>;
 375                 clock-names = "i2c";
 376
 377                 status = "disabled";
 378         };
 379
 380         i2c3: i2c@2005a000 {
 381                 compatible = "rockchip,rk3066-i2c";
 382                 reg = <0x2005a000 0x1000>;
 383                 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 384                 #address-cells = <1>;
 385                 #size-cells = <0>;
 386
 387                 rockchip,grf = <&grf>;
 388
 389                 clocks = <&cru PCLK_I2C3>;
 390                 clock-names = "i2c";
 391
 392                 status = "disabled";
 393         };
 394
 395         i2c4: i2c@2005e000 {
 396                 compatible = "rockchip,rk3066-i2c";
 397                 reg = <0x2005e000 0x1000>;
 398                 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 399                 #address-cells = <1>;
 400                 #size-cells = <0>;
 401
 402                 rockchip,grf = <&grf>;
 403
 404                 clocks = <&cru PCLK_I2C4>;
 405                 clock-names = "i2c";
 406
 407                 status = "disabled";
 408         };
 409
 410         uart2: serial@20064000 {
 411                 compatible = "snps,dw-apb-uart";
 412                 reg = <0x20064000 0x400>;
 413                 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 414                 reg-shift = <2>;
 415                 reg-io-width = <1>;
 416                 clock-names = "baudclk", "apb_pclk";
 417                 clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
 418                 status = "disabled";
 419         };
 420
 421         uart3: serial@20068000 {
 422                 compatible = "snps,dw-apb-uart";
 423                 reg = <0x20068000 0x400>;
 424                 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 425                 reg-shift = <2>;
 426                 reg-io-width = <1>;
 427                 clock-names = "baudclk", "apb_pclk";
 428                 clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
 429                 status = "disabled";
 430         };
 431
 432         saradc: saradc@2006c000 {
 433                 compatible = "rockchip,saradc";
 434                 reg = <0x2006c000 0x100>;
 435                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 436                 #io-channel-cells = <1>;
 437                 clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
 438                 clock-names = "saradc", "apb_pclk";
 439                 resets = <&cru SRST_SARADC>;
 440                 reset-names = "saradc-apb";
 441                 status = "disabled";
 442         };
 443
 444         spi0: spi@20070000 {
 445                 compatible = "rockchip,rk3066-spi";
 446                 clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
 447                 clock-names = "spiclk", "apb_pclk";
 448                 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 449                 reg = <0x20070000 0x1000>;
 450                 #address-cells = <1>;
 451                 #size-cells = <0>;
 452                 dmas = <&dmac2 10>, <&dmac2 11>;
 453                 dma-names = "tx", "rx";
 454                 status = "disabled";
 455         };
 456
 457         spi1: spi@20074000 {
 458                 compatible = "rockchip,rk3066-spi";
 459                 clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
 460                 clock-names = "spiclk", "apb_pclk";
 461                 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 462                 reg = <0x20074000 0x1000>;
 463                 #address-cells = <1>;
 464                 #size-cells = <0>;
 465                 dmas = <&dmac2 12>, <&dmac2 13>;
 466                 dma-names = "tx", "rx";
 467                 status = "disabled";
 468         };
 469 };