Linux 5.6.13
[linux/fpc-iii.git] / arch / arm / mach-davinci / clock.h
blob54f5663b08eeda5aa1305f69c2e9f71c3e6dff87
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * TI DaVinci clock definitions
5 * Copyright (C) 2006-2007 Texas Instruments.
6 * Copyright (C) 2008-2009 Deep Root Systems, LLC
7 */
9 #ifndef __ARCH_ARM_DAVINCI_CLOCK_H
10 #define __ARCH_ARM_DAVINCI_CLOCK_H
12 /* PLL/Reset register offsets */
13 #define PLLCTL 0x100
14 #define PLLCTL_PLLEN BIT(0)
15 #define PLLCTL_PLLPWRDN BIT(1)
16 #define PLLCTL_PLLRST BIT(3)
17 #define PLLCTL_PLLDIS BIT(4)
18 #define PLLCTL_PLLENSRC BIT(5)
19 #define PLLCTL_CLKMODE BIT(8)
21 #define PLLM 0x110
22 #define PLLM_PLLM_MASK 0xff
24 #define PREDIV 0x114
25 #define PLLDIV1 0x118
26 #define PLLDIV2 0x11c
27 #define PLLDIV3 0x120
28 #define POSTDIV 0x128
29 #define BPDIV 0x12c
30 #define PLLCMD 0x138
31 #define PLLSTAT 0x13c
32 #define PLLALNCTL 0x140
33 #define PLLDCHANGE 0x144
34 #define PLLCKEN 0x148
35 #define PLLCKSTAT 0x14c
36 #define PLLSYSTAT 0x150
37 #define PLLDIV4 0x160
38 #define PLLDIV5 0x164
39 #define PLLDIV6 0x168
40 #define PLLDIV7 0x16c
41 #define PLLDIV8 0x170
42 #define PLLDIV9 0x174
43 #define PLLDIV_EN BIT(15)
44 #define PLLDIV_RATIO_MASK 0x1f
47 * OMAP-L138 system reference guide recommends a wait for 4 OSCIN/CLKIN
48 * cycles to ensure that the PLLC has switched to bypass mode. Delay of 1us
49 * ensures we are good for all > 4MHz OSCIN/CLKIN inputs. Typically the input
50 * is ~25MHz. Units are micro seconds.
52 #define PLL_BYPASS_TIME 1
53 /* From OMAP-L138 datasheet table 6-4. Units are micro seconds */
54 #define PLL_RESET_TIME 1
56 * From OMAP-L138 datasheet table 6-4; assuming prediv = 1, sqrt(pllm) = 4
57 * Units are micro seconds.
59 #define PLL_LOCK_TIME 20
61 #endif