1 // SPDX-License-Identifier: GPL-2.0
3 * Google Peach Pit Rev 6+ board device tree source
5 * Copyright (c) 2014 Google, Inc
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/clock/maxim,max77802.h>
13 #include <dt-bindings/regulator/maxim,max77802.h>
14 #include <dt-bindings/sound/samsung-i2s.h>
15 #include "exynos5420.dtsi"
16 #include "exynos5420-cpus.dtsi"
19 model = "Google Peach Pit Rev 6+";
21 compatible = "google,pit-rev16",
22 "google,pit-rev15", "google,pit-rev14",
23 "google,pit-rev13", "google,pit-rev12",
24 "google,pit-rev11", "google,pit-rev10",
25 "google,pit-rev9", "google,pit-rev8",
26 "google,pit-rev7", "google,pit-rev6",
27 "google,pit", "google,peach","samsung,exynos5420",
31 /* Assign 20 so we don't get confused w/ builtin ones */
35 backlight: backlight {
36 compatible = "pwm-backlight";
37 pwms = <&pwm 0 1000000 0>;
38 brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
39 default-brightness-level = <7>;
40 power-supply = <&tps65090_fet1>;
41 pinctrl-0 = <&pwm0_out>;
42 pinctrl-names = "default";
46 stdout-path = "serial3:115200n8";
51 compatible = "samsung,exynos5420-oscclk";
52 clock-frequency = <24000000>;
57 compatible = "gpio-keys";
59 pinctrl-names = "default";
60 pinctrl-0 = <&power_key_irq &lid_irq>;
64 gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
65 linux,code = <KEY_POWER>;
71 gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
72 linux,input-type = <5>; /* EV_SW */
73 linux,code = <0>; /* SW_LID */
74 debounce-interval = <1>;
80 device_type = "memory";
81 reg = <0x20000000 0x80000000>;
85 compatible = "google,snow-audio-max98090";
87 samsung,model = "Peach-Pit-I2S-MAX98090";
88 samsung,i2s-controller = <&i2s0>;
89 samsung,audio-codec = <&max98090>;
92 sound-dai = <&i2s0 0>;
96 sound-dai = <&max98090>, <&hdmi>;
100 usb300_vbus_reg: regulator-usb300 {
101 compatible = "regulator-fixed";
102 regulator-name = "P5.0V_USB3CON0";
103 regulator-min-microvolt = <5000000>;
104 regulator-max-microvolt = <5000000>;
105 gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
106 pinctrl-names = "default";
107 pinctrl-0 = <&usb300_vbus_en>;
111 usb301_vbus_reg: regulator-usb301 {
112 compatible = "regulator-fixed";
113 regulator-name = "P5.0V_USB3CON1";
114 regulator-min-microvolt = <5000000>;
115 regulator-max-microvolt = <5000000>;
116 gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
117 pinctrl-names = "default";
118 pinctrl-0 = <&usb301_vbus_en>;
122 vbat: fixed-regulator {
123 compatible = "regulator-fixed";
124 regulator-name = "vbat-supply";
130 compatible = "auo,b116xw03";
131 power-supply = <&tps65090_fet6>;
132 backlight = <&backlight>;
136 remote-endpoint = <&bridge_out>;
141 mmc1_pwrseq: mmc1_pwrseq {
142 compatible = "mmc-pwrseq-simple";
143 reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
144 clocks = <&max77802 MAX77802_CLK_32K_CP>;
145 clock-names = "ext_clock";
151 vdd-supply = <&ldo9_reg>;
155 assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
156 assigned-clock-parents = <&clock CLK_MAU_EPLL>;
160 cpu-supply = <&buck2_reg>;
164 cpu-supply = <&buck6_reg>;
169 pinctrl-names = "default";
170 pinctrl-0 = <&dp_hpd_gpio>;
171 samsung,color-space = <0>;
172 samsung,color-depth = <1>;
173 samsung,link-rate = <0x06>;
174 samsung,lane-count = <2>;
175 hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
180 remote-endpoint = <&bridge_in>;
193 hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
194 pinctrl-names = "default";
195 pinctrl-0 = <&hdmi_hpd_irq>;
198 hdmi-en-supply = <&tps65090_fet7>;
199 vdd-supply = <&ldo8_reg>;
200 vdd_osc-supply = <&ldo10_reg>;
201 vdd_pll-supply = <&ldo8_reg>;
206 clock-frequency = <400000>;
208 max77802: max77802-pmic@9 {
209 compatible = "maxim,max77802";
210 interrupt-parent = <&gpx3>;
211 interrupts = <1 IRQ_TYPE_NONE>;
212 pinctrl-names = "default";
213 pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
214 <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
219 inb1-supply = <&tps65090_dcdc2>;
220 inb2-supply = <&tps65090_dcdc1>;
221 inb3-supply = <&tps65090_dcdc2>;
222 inb4-supply = <&tps65090_dcdc2>;
223 inb5-supply = <&tps65090_dcdc1>;
224 inb6-supply = <&tps65090_dcdc2>;
225 inb7-supply = <&tps65090_dcdc1>;
226 inb8-supply = <&tps65090_dcdc1>;
227 inb9-supply = <&tps65090_dcdc1>;
228 inb10-supply = <&tps65090_dcdc1>;
230 inl1-supply = <&buck5_reg>;
231 inl2-supply = <&buck7_reg>;
232 inl3-supply = <&buck9_reg>;
233 inl4-supply = <&buck9_reg>;
234 inl5-supply = <&buck9_reg>;
235 inl6-supply = <&tps65090_dcdc2>;
236 inl7-supply = <&buck9_reg>;
237 inl9-supply = <&tps65090_dcdc2>;
238 inl10-supply = <&buck7_reg>;
242 regulator-name = "vdd_mif";
243 regulator-min-microvolt = <800000>;
244 regulator-max-microvolt = <1300000>;
247 regulator-ramp-delay = <12500>;
248 regulator-state-mem {
249 regulator-off-in-suspend;
254 regulator-name = "vdd_arm";
255 regulator-min-microvolt = <800000>;
256 regulator-max-microvolt = <1500000>;
259 regulator-ramp-delay = <12500>;
260 regulator-state-mem {
261 regulator-off-in-suspend;
266 regulator-name = "vdd_int";
267 regulator-min-microvolt = <800000>;
268 regulator-max-microvolt = <1400000>;
271 regulator-ramp-delay = <12500>;
272 regulator-state-mem {
273 regulator-off-in-suspend;
278 regulator-name = "vdd_g3d";
279 regulator-min-microvolt = <700000>;
280 regulator-max-microvolt = <1400000>;
283 regulator-ramp-delay = <12500>;
284 regulator-state-mem {
285 regulator-off-in-suspend;
290 regulator-name = "vdd_1v2";
291 regulator-min-microvolt = <1200000>;
292 regulator-max-microvolt = <1200000>;
294 regulator-state-mem {
295 regulator-off-in-suspend;
300 regulator-name = "vdd_kfc";
301 regulator-min-microvolt = <800000>;
302 regulator-max-microvolt = <1500000>;
305 regulator-ramp-delay = <12500>;
306 regulator-state-mem {
307 regulator-off-in-suspend;
312 regulator-name = "vdd_1v35";
313 regulator-min-microvolt = <1350000>;
314 regulator-max-microvolt = <1350000>;
317 regulator-state-mem {
318 regulator-on-in-suspend;
323 regulator-name = "vdd_emmc";
324 regulator-min-microvolt = <2850000>;
325 regulator-max-microvolt = <2850000>;
328 regulator-state-mem {
329 regulator-off-in-suspend;
334 regulator-name = "vdd_2v";
335 regulator-min-microvolt = <2000000>;
336 regulator-max-microvolt = <2000000>;
339 regulator-state-mem {
340 regulator-on-in-suspend;
345 regulator-name = "vdd_1v8";
346 regulator-min-microvolt = <1800000>;
347 regulator-max-microvolt = <1800000>;
350 regulator-state-mem {
351 regulator-on-in-suspend;
356 regulator-name = "vdd_1v0";
357 regulator-min-microvolt = <1000000>;
358 regulator-max-microvolt = <1000000>;
360 regulator-state-mem {
361 regulator-on-in-suspend;
362 regulator-mode = <MAX77802_OPMODE_LP>;
367 regulator-name = "vdd_1v2_2";
368 regulator-min-microvolt = <1200000>;
369 regulator-max-microvolt = <1200000>;
373 regulator-name = "vdd_1v8_3";
374 regulator-min-microvolt = <1800000>;
375 regulator-max-microvolt = <1800000>;
377 regulator-state-mem {
378 regulator-on-in-suspend;
379 regulator-mode = <MAX77802_OPMODE_LP>;
383 vqmmc_sdcard: ldo4_reg: LDO4 {
384 regulator-name = "vdd_sd";
385 regulator-min-microvolt = <1800000>;
386 regulator-max-microvolt = <2800000>;
388 regulator-state-mem {
389 regulator-off-in-suspend;
394 regulator-name = "vdd_1v8_5";
395 regulator-min-microvolt = <1800000>;
396 regulator-max-microvolt = <1800000>;
398 regulator-state-mem {
399 regulator-off-in-suspend;
404 regulator-name = "vdd_1v8_6";
405 regulator-min-microvolt = <1800000>;
406 regulator-max-microvolt = <1800000>;
408 regulator-state-mem {
409 regulator-off-in-suspend;
414 regulator-name = "vdd_1v8_7";
415 regulator-min-microvolt = <1800000>;
416 regulator-max-microvolt = <1800000>;
420 regulator-name = "vdd_ldo8";
421 regulator-min-microvolt = <1000000>;
422 regulator-max-microvolt = <1000000>;
424 regulator-state-mem {
425 regulator-off-in-suspend;
430 regulator-name = "vdd_ldo9";
431 regulator-min-microvolt = <1800000>;
432 regulator-max-microvolt = <1800000>;
433 regulator-state-mem {
434 regulator-on-in-suspend;
435 regulator-mode = <MAX77802_OPMODE_LP>;
440 regulator-name = "vdd_ldo10";
441 regulator-min-microvolt = <1800000>;
442 regulator-max-microvolt = <1800000>;
443 regulator-state-mem {
444 regulator-off-in-suspend;
449 regulator-name = "vdd_ldo11";
450 regulator-min-microvolt = <1800000>;
451 regulator-max-microvolt = <1800000>;
453 regulator-state-mem {
454 regulator-on-in-suspend;
455 regulator-mode = <MAX77802_OPMODE_LP>;
460 regulator-name = "vdd_ldo12";
461 regulator-min-microvolt = <3000000>;
462 regulator-max-microvolt = <3000000>;
464 regulator-state-mem {
465 regulator-off-in-suspend;
470 regulator-name = "vdd_ldo13";
471 regulator-min-microvolt = <1800000>;
472 regulator-max-microvolt = <1800000>;
474 regulator-state-mem {
475 regulator-on-in-suspend;
476 regulator-mode = <MAX77802_OPMODE_LP>;
481 regulator-name = "vdd_ldo14";
482 regulator-min-microvolt = <1800000>;
483 regulator-max-microvolt = <1800000>;
485 regulator-state-mem {
486 regulator-off-in-suspend;
491 regulator-name = "vdd_ldo15";
492 regulator-min-microvolt = <1000000>;
493 regulator-max-microvolt = <1000000>;
495 regulator-state-mem {
496 regulator-off-in-suspend;
501 regulator-name = "vdd_g3ds";
502 regulator-min-microvolt = <900000>;
503 regulator-max-microvolt = <1400000>;
505 regulator-state-mem {
506 regulator-off-in-suspend;
511 regulator-name = "ldo_18";
512 regulator-min-microvolt = <1800000>;
513 regulator-max-microvolt = <1800000>;
517 regulator-name = "ldo_19";
518 regulator-min-microvolt = <1800000>;
519 regulator-max-microvolt = <1800000>;
523 regulator-name = "ldo_20";
524 regulator-min-microvolt = <1800000>;
525 regulator-max-microvolt = <1800000>;
530 regulator-name = "ldo_21";
531 regulator-min-microvolt = <2800000>;
532 regulator-max-microvolt = <2800000>;
536 regulator-name = "ldo_23";
537 regulator-min-microvolt = <3300000>;
538 regulator-max-microvolt = <3300000>;
541 regulator-name = "ldo_24";
542 regulator-min-microvolt = <2800000>;
543 regulator-max-microvolt = <2800000>;
547 regulator-name = "ldo_25";
548 regulator-min-microvolt = <3300000>;
549 regulator-max-microvolt = <3300000>;
553 regulator-name = "ldo_26";
554 regulator-min-microvolt = <1200000>;
555 regulator-max-microvolt = <1200000>;
559 regulator-name = "ldo_27";
560 regulator-min-microvolt = <1200000>;
561 regulator-max-microvolt = <1200000>;
565 regulator-name = "ldo_28";
566 regulator-min-microvolt = <1800000>;
567 regulator-max-microvolt = <1800000>;
571 regulator-name = "ldo_29";
572 regulator-min-microvolt = <1800000>;
573 regulator-max-microvolt = <1800000>;
577 regulator-name = "vdd_mifs";
578 regulator-min-microvolt = <1000000>;
579 regulator-max-microvolt = <1000000>;
581 regulator-state-mem {
582 regulator-off-in-suspend;
587 regulator-name = "ldo_32";
588 regulator-min-microvolt = <3000000>;
589 regulator-max-microvolt = <3000000>;
593 regulator-name = "ldo_33";
594 regulator-min-microvolt = <2800000>;
595 regulator-max-microvolt = <2800000>;
599 regulator-name = "ldo_34";
600 regulator-min-microvolt = <3000000>;
601 regulator-max-microvolt = <3000000>;
605 regulator-name = "ldo_35";
606 regulator-min-microvolt = <1200000>;
607 regulator-max-microvolt = <1200000>;
615 clock-frequency = <400000>;
618 compatible = "maxim,max98090";
620 interrupts = <2 IRQ_TYPE_NONE>;
621 interrupt-parent = <&gpx0>;
622 pinctrl-names = "default";
623 pinctrl-0 = <&max98090_irq>;
624 clocks = <&pmu_system_controller 0>;
625 clock-names = "mclk";
626 #sound-dai-cells = <0>;
630 compatible = "isil,isl29018";
632 vcc-supply = <&tps65090_fet5>;
635 ps8625: lvds-bridge@48 {
636 compatible = "parade,ps8625";
638 sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
639 reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
644 #address-cells = <1>;
650 bridge_out: endpoint {
651 remote-endpoint = <&panel_in>;
658 bridge_in: endpoint {
659 remote-endpoint = <&dp_out>;
669 clock-frequency = <333000>;
673 compatible = "atmel,maxtouch";
675 interrupt-parent = <&gpx1>;
676 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
678 pinctrl-names = "default";
679 pinctrl-0 = <&trackpad_irq>;
680 linux,gpio-keymap = <KEY_RESERVED
682 KEY_RESERVED /* GPIO0 */
683 KEY_RESERVED /* GPIO1 */
684 KEY_RESERVED /* GPIO2 */
685 BTN_LEFT>; /* GPIO3 */
691 clock-frequency = <400000>;
694 compatible = "infineon,slb9645tt";
697 /* Unused irq; but still need to configure the pins */
698 pinctrl-names = "default";
699 pinctrl-0 = <&tpm_irq>;
705 samsung,i2c-sda-delay = <100>;
706 samsung,i2c-max-bus-freq = <66000>;
707 samsung,i2c-slave-addr = <0x50>;
711 assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
712 assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
726 clock-frequency = <400000000>;
727 samsung,dw-mshc-ciu-div = <3>;
728 samsung,dw-mshc-sdr-timing = <0 4>;
729 samsung,dw-mshc-ddr-timing = <0 2>;
730 samsung,dw-mshc-hs400-timing = <0 2>;
731 samsung,read-strobe-delay = <90>;
732 pinctrl-names = "default";
733 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
737 /* WiFi SDIO module */
742 keep-power-in-suspend;
743 clock-frequency = <400000000>;
744 samsung,dw-mshc-ciu-div = <1>;
745 samsung,dw-mshc-sdr-timing = <0 1>;
746 samsung,dw-mshc-ddr-timing = <0 2>;
747 pinctrl-names = "default";
748 pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
749 <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
752 mmc-pwrseq = <&mmc1_pwrseq>;
753 vqmmc-supply = <&buck10_reg>;
760 card-detect-delay = <200>;
761 clock-frequency = <400000000>;
762 samsung,dw-mshc-ciu-div = <3>;
763 samsung,dw-mshc-sdr-timing = <2 3>;
764 samsung,dw-mshc-ddr-timing = <1 2>;
765 pinctrl-names = "default";
766 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
772 pinctrl-names = "default";
773 pinctrl-0 = <&mask_tpm_reset>;
776 samsung,pins = "gpx0-0";
777 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
778 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
779 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
782 max98090_irq: max98090-irq {
783 samsung,pins = "gpx0-2";
784 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
785 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
786 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
789 /* We need GPX0_6 to be low at sleep time; just keep it low always */
790 mask_tpm_reset: mask-tpm-reset {
791 samsung,pins = "gpx0-6";
792 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
793 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
794 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
795 samsung,pin-val = <0>;
799 samsung,pins = "gpx1-0";
800 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
801 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
802 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
805 trackpad_irq: trackpad-irq {
806 samsung,pins = "gpx1-1";
807 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
808 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
809 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
812 power_key_irq: power-key-irq {
813 samsung,pins = "gpx1-2";
814 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
815 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
816 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
820 samsung,pins = "gpx1-5";
821 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
822 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
823 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
826 tps65090_irq: tps65090-irq {
827 samsung,pins = "gpx2-5";
828 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
829 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
830 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
833 dp_hpd_gpio: dp_hpd_gpio {
834 samsung,pins = "gpx2-6";
835 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
836 samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
837 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
840 max77802_irq: max77802-irq {
841 samsung,pins = "gpx3-1";
842 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
843 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
844 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
848 samsung,pins = "gpx3-4";
849 samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
850 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
851 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
854 hdmi_hpd_irq: hdmi-hpd-irq {
855 samsung,pins = "gpx3-7";
856 samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
857 samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
858 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
861 pmic_dvs_1: pmic-dvs-1 {
862 samsung,pins = "gpy7-6";
863 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
864 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
865 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
870 /* Adjust WiFi drive strengths lower for EMI */
872 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
876 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
879 sd1_bus1: sd1-bus-width1 {
880 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
883 sd1_bus4: sd1-bus-width4 {
884 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
887 sd1_bus8: sd1-bus-width8 {
888 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
893 pmic_dvs_2: pmic-dvs-2 {
894 samsung,pins = "gpj4-2";
895 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
896 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
897 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
900 pmic_dvs_3: pmic-dvs-3 {
901 samsung,pins = "gpj4-3";
902 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
903 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
904 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
909 /* Drive SPI lines at x2 for better integrity */
911 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
914 /* Drive SPI chip select at x2 for better integrity */
915 ec_spi_cs: ec-spi-cs {
916 samsung,pins = "gpb1-2";
917 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
918 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
919 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
922 usb300_vbus_en: usb300-vbus-en {
923 samsung,pins = "gph0-0";
924 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
925 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
926 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
929 usb301_vbus_en: usb301-vbus-en {
930 samsung,pins = "gph0-1";
931 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
932 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
933 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
936 pmic_selb: pmic-selb {
937 samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
939 samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
940 samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
941 samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
945 &pmu_system_controller {
946 assigned-clocks = <&pmu_system_controller 0>;
947 assigned-clock-parents = <&clock CLK_FIN_PLL>;
952 clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
953 clock-names = "rtc", "rtc_src";
959 samsung,spi-src-clk = <0>;
960 cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
963 compatible = "google,cros-ec-spi";
964 interrupt-parent = <&gpx1>;
965 interrupts = <5 IRQ_TYPE_NONE>;
966 pinctrl-names = "default";
967 pinctrl-0 = <&ec_spi_cs &ec_irq>;
969 spi-max-frequency = <3125000>;
970 google,has-vbc-nvram;
973 samsung,spi-feedback-delay = <1>;
976 i2c_tunnel: i2c-tunnel {
977 compatible = "google,cros-ec-i2c-tunnel";
978 #address-cells = <1>;
980 google,remote-bus = <0>;
982 battery: sbs-battery@b {
983 compatible = "sbs,sbs-battery";
985 sbs,poll-retry-count = <1>;
986 sbs,i2c-retry-count = <2>;
990 compatible = "ti,tps65090";
994 * Config irq to disable internal pulls
995 * even though we run in polling mode.
997 pinctrl-names = "default";
998 pinctrl-0 = <&tps65090_irq>;
1000 vsys1-supply = <&vbat>;
1001 vsys2-supply = <&vbat>;
1002 vsys3-supply = <&vbat>;
1003 infet1-supply = <&vbat>;
1004 infet2-supply = <&tps65090_dcdc1>;
1005 infet3-supply = <&tps65090_dcdc2>;
1006 infet4-supply = <&tps65090_dcdc2>;
1007 infet5-supply = <&tps65090_dcdc2>;
1008 infet6-supply = <&tps65090_dcdc2>;
1009 infet7-supply = <&tps65090_dcdc1>;
1010 vsys-l1-supply = <&vbat>;
1011 vsys-l2-supply = <&vbat>;
1014 tps65090_dcdc1: dcdc1 {
1015 ti,enable-ext-control;
1017 tps65090_dcdc2: dcdc2 {
1018 ti,enable-ext-control;
1020 tps65090_dcdc3: dcdc3 {
1021 ti,enable-ext-control;
1023 tps65090_fet1: fet1 {
1024 regulator-name = "vcd_led";
1026 tps65090_fet2: fet2 {
1027 regulator-name = "video_mid";
1028 regulator-always-on;
1030 tps65090_fet3: fet3 {
1031 regulator-name = "wwan_r";
1032 regulator-always-on;
1034 tps65090_fet4: fet4 {
1035 regulator-name = "sdcard";
1036 regulator-always-on;
1038 tps65090_fet5: fet5 {
1039 regulator-name = "camout";
1040 regulator-always-on;
1042 tps65090_fet6: fet6 {
1043 regulator-name = "lcd_vdd";
1045 tps65090_fet7: fet7 {
1046 regulator-name = "video_mid_1a";
1047 regulator-always-on;
1049 tps65090_ldo1: ldo1 {
1051 tps65090_ldo2: ldo2 {
1056 compatible = "ti,tps65090-charger";
1068 vtmu-supply = <&ldo10_reg>;
1072 vtmu-supply = <&ldo10_reg>;
1076 vtmu-supply = <&ldo10_reg>;
1080 vtmu-supply = <&ldo10_reg>;
1084 vtmu-supply = <&ldo10_reg>;
1096 vbus-supply = <&usb300_vbus_reg>;
1100 vbus-supply = <&usb301_vbus_reg>;
1104 * Use longest HW watchdog in SoC (32 seconds) since the hardware
1105 * watchdog provides no debugging information (compared to soft/hard
1106 * lockup detectors) and so should be last resort.
1112 #include "cros-ec-keyboard.dtsi"
1113 #include "cros-adc-thermistors.dtsi"