| blob | 3ef468893b3fe34548719c40b8a5ae009069331e |
1 /*
2 * Copyright (c) 2005-2011 Atheros Communications Inc.
3 * Copyright (c) 2011-2013 Qualcomm Atheros, Inc.
4 *
5 * Permission to use, copy, modify, and/or distribute this software for any
6 * purpose with or without fee is hereby granted, provided that the above
7 * copyright notice and this permission notice appear in all copies.
8 *
9 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16 */
18 #ifndef _WMI_H_
19 #define _WMI_H_
21 #include <linux/types.h>
22 #include <net/mac80211.h>
24 /*
25 * This file specifies the WMI interface for the Unified Software
26 * Architecture.
27 *
28 * It includes definitions of all the commands and events. Commands are
29 * messages from the host to the target. Events and Replies are messages
30 * from the target to the host.
31 *
32 * Ownership of correctness in regards to WMI commands belongs to the host
33 * driver and the target is not required to validate parameters for value,
34 * proper range, or any other checking.
35 *
36 * Guidelines for extending this interface are below.
37 *
38 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
39 *
40 * 2. Use ONLY u32 type for defining member variables within WMI
41 * command/event structures. Do not use u8, u16, bool or
42 * enum types within these structures.
43 *
44 * 3. DO NOT define bit fields within structures. Implement bit fields
45 * using masks if necessary. Do not use the programming language's bit
46 * field definition.
47 *
48 * 4. Define macros for encode/decode of u8, u16 fields within
49 * the u32 variables. Use these macros for set/get of these fields.
50 * Try to use this to optimize the structure without bloating it with
51 * u32 variables for every lower sized field.
52 *
53 * 5. Do not use PACK/UNPACK attributes for the structures as each member
54 * variable is already 4-byte aligned by virtue of being a u32
55 * type.
56 *
57 * 6. Comment each parameter part of the WMI command/event structure by
58 * using the 2 stars at the begining of C comment instead of one star to
59 * enable HTML document generation using Doxygen.
60 *
61 */
63 /* Control Path */
65 __le32 cmd_id;
68 #define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF
69 #define WMI_CMD_HDR_CMD_ID_LSB 0
70 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
71 #define WMI_CMD_HDR_PLT_PRIV_LSB 24
73 #define HTC_PROTOCOL_VERSION 0x0002
74 #define WMI_PROTOCOL_VERSION 0x0002
76 /*
77 * There is no signed version of __le32, so for a temporary solution come
78 * up with our own version. The idea is from fs/ntfs/types.h.
79 *
80 * Use a_ prefix so that it doesn't conflict if we get proper support to
81 * linux/types.h.
82 */
86 {
88 }
91 {
93 }
97 WMI_SERVICE_SCAN_OFFLOAD,
98 WMI_SERVICE_ROAM_OFFLOAD,
99 WMI_SERVICE_BCN_MISS_OFFLOAD,
100 WMI_SERVICE_STA_PWRSAVE,
101 WMI_SERVICE_STA_ADVANCED_PWRSAVE,
102 WMI_SERVICE_AP_UAPSD,
103 WMI_SERVICE_AP_DFS,
104 WMI_SERVICE_11AC,
105 WMI_SERVICE_BLOCKACK,
106 WMI_SERVICE_PHYERR,
107 WMI_SERVICE_BCN_FILTER,
108 WMI_SERVICE_RTT,
109 WMI_SERVICE_RATECTRL,
110 WMI_SERVICE_WOW,
111 WMI_SERVICE_RATECTRL_CACHE,
112 WMI_SERVICE_IRAM_TIDS,
113 WMI_SERVICE_ARPNS_OFFLOAD,
114 WMI_SERVICE_NLO,
115 WMI_SERVICE_GTK_OFFLOAD,
116 WMI_SERVICE_SCAN_SCH,
117 WMI_SERVICE_CSA_OFFLOAD,
118 WMI_SERVICE_CHATTER,
119 WMI_SERVICE_COEX_FREQAVOID,
120 WMI_SERVICE_PACKET_POWER_SAVE,
121 WMI_SERVICE_FORCE_FW_HANG,
122 WMI_SERVICE_GPIO,
123 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
124 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
125 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
126 WMI_SERVICE_STA_KEEP_ALIVE,
127 WMI_SERVICE_TX_ENCAP,
128 WMI_SERVICE_BURST,
129 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
130 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
131 WMI_SERVICE_ROAM_SCAN_OFFLOAD,
132 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
133 WMI_SERVICE_EARLY_RX,
134 WMI_SERVICE_STA_SMPS,
135 WMI_SERVICE_FWTEST,
136 WMI_SERVICE_STA_WMMAC,
137 WMI_SERVICE_TDLS,
138 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
139 WMI_SERVICE_ADAPTIVE_OCS,
140 WMI_SERVICE_BA_SSN_SUPPORT,
141 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
142 WMI_SERVICE_WLAN_HB,
143 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
144 WMI_SERVICE_BATCH_SCAN,
145 WMI_SERVICE_QPOWER,
146 WMI_SERVICE_PLMREQ,
147 WMI_SERVICE_THERMAL_MGMT,
148 WMI_SERVICE_RMC,
149 WMI_SERVICE_MHF_OFFLOAD,
150 WMI_SERVICE_COEX_SAR,
151 WMI_SERVICE_BCN_TXRATE_OVERRIDE,
152 WMI_SERVICE_NAN,
153 WMI_SERVICE_L1SS_STAT,
154 WMI_SERVICE_ESTIMATE_LINKSPEED,
155 WMI_SERVICE_OBSS_SCAN,
156 WMI_SERVICE_TDLS_OFFCHAN,
157 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
158 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
159 WMI_SERVICE_IBSS_PWRSAVE,
160 WMI_SERVICE_LPASS,
161 WMI_SERVICE_EXTSCAN,
162 WMI_SERVICE_D0WOW,
163 WMI_SERVICE_HSOFFLOAD,
164 WMI_SERVICE_ROAM_HO_OFFLOAD,
165 WMI_SERVICE_RX_FULL_REORDER,
166 WMI_SERVICE_DHCP_OFFLOAD,
167 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
168 WMI_SERVICE_MDNS_OFFLOAD,
169 WMI_SERVICE_SAP_AUTH_OFFLOAD,
170 WMI_SERVICE_ATF,
171 WMI_SERVICE_COEX_GPIO,
172 WMI_SERVICE_ENHANCED_PROXY_STA,
173 WMI_SERVICE_TT,
174 WMI_SERVICE_PEER_CACHING,
175 WMI_SERVICE_AUX_SPECTRAL_INTF,
176 WMI_SERVICE_AUX_CHAN_LOAD_INTF,
177 WMI_SERVICE_BSS_CHANNEL_INFO_64,
178 WMI_SERVICE_EXT_RES_CFG_SUPPORT,
179 WMI_SERVICE_MESH_11S,
180 WMI_SERVICE_MESH_NON_11S,
181 WMI_SERVICE_PEER_STATS,
182 WMI_SERVICE_RESTRT_CHNL_SUPPORT,
183 WMI_SERVICE_TX_MODE_PUSH_ONLY,
184 WMI_SERVICE_TX_MODE_PUSH_PULL,
185 WMI_SERVICE_TX_MODE_DYNAMIC,
187 /* keep last */
188 WMI_SERVICE_MAX,
189 };
193 WMI_10X_SERVICE_SCAN_OFFLOAD,
194 WMI_10X_SERVICE_ROAM_OFFLOAD,
195 WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
196 WMI_10X_SERVICE_STA_PWRSAVE,
197 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
198 WMI_10X_SERVICE_AP_UAPSD,
199 WMI_10X_SERVICE_AP_DFS,
200 WMI_10X_SERVICE_11AC,
201 WMI_10X_SERVICE_BLOCKACK,
202 WMI_10X_SERVICE_PHYERR,
203 WMI_10X_SERVICE_BCN_FILTER,
204 WMI_10X_SERVICE_RTT,
205 WMI_10X_SERVICE_RATECTRL,
206 WMI_10X_SERVICE_WOW,
207 WMI_10X_SERVICE_RATECTRL_CACHE,
208 WMI_10X_SERVICE_IRAM_TIDS,
209 WMI_10X_SERVICE_BURST,
211 /* introduced in 10.2 */
212 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
213 WMI_10X_SERVICE_FORCE_FW_HANG,
214 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
215 WMI_10X_SERVICE_ATF,
216 WMI_10X_SERVICE_COEX_GPIO,
217 WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
218 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
219 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
220 WMI_10X_SERVICE_MESH,
221 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
222 WMI_10X_SERVICE_PEER_STATS,
223 };
227 WMI_MAIN_SERVICE_SCAN_OFFLOAD,
228 WMI_MAIN_SERVICE_ROAM_OFFLOAD,
229 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
230 WMI_MAIN_SERVICE_STA_PWRSAVE,
231 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
232 WMI_MAIN_SERVICE_AP_UAPSD,
233 WMI_MAIN_SERVICE_AP_DFS,
234 WMI_MAIN_SERVICE_11AC,
235 WMI_MAIN_SERVICE_BLOCKACK,
236 WMI_MAIN_SERVICE_PHYERR,
237 WMI_MAIN_SERVICE_BCN_FILTER,
238 WMI_MAIN_SERVICE_RTT,
239 WMI_MAIN_SERVICE_RATECTRL,
240 WMI_MAIN_SERVICE_WOW,
241 WMI_MAIN_SERVICE_RATECTRL_CACHE,
242 WMI_MAIN_SERVICE_IRAM_TIDS,
243 WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
244 WMI_MAIN_SERVICE_NLO,
245 WMI_MAIN_SERVICE_GTK_OFFLOAD,
246 WMI_MAIN_SERVICE_SCAN_SCH,
247 WMI_MAIN_SERVICE_CSA_OFFLOAD,
248 WMI_MAIN_SERVICE_CHATTER,
249 WMI_MAIN_SERVICE_COEX_FREQAVOID,
250 WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
251 WMI_MAIN_SERVICE_FORCE_FW_HANG,
252 WMI_MAIN_SERVICE_GPIO,
253 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
254 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
255 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
256 WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
257 WMI_MAIN_SERVICE_TX_ENCAP,
258 };
262 WMI_10_4_SERVICE_SCAN_OFFLOAD,
263 WMI_10_4_SERVICE_ROAM_OFFLOAD,
264 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
265 WMI_10_4_SERVICE_STA_PWRSAVE,
266 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
267 WMI_10_4_SERVICE_AP_UAPSD,
268 WMI_10_4_SERVICE_AP_DFS,
269 WMI_10_4_SERVICE_11AC,
270 WMI_10_4_SERVICE_BLOCKACK,
271 WMI_10_4_SERVICE_PHYERR,
272 WMI_10_4_SERVICE_BCN_FILTER,
273 WMI_10_4_SERVICE_RTT,
274 WMI_10_4_SERVICE_RATECTRL,
275 WMI_10_4_SERVICE_WOW,
276 WMI_10_4_SERVICE_RATECTRL_CACHE,
277 WMI_10_4_SERVICE_IRAM_TIDS,
278 WMI_10_4_SERVICE_BURST,
279 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
280 WMI_10_4_SERVICE_GTK_OFFLOAD,
281 WMI_10_4_SERVICE_SCAN_SCH,
282 WMI_10_4_SERVICE_CSA_OFFLOAD,
283 WMI_10_4_SERVICE_CHATTER,
284 WMI_10_4_SERVICE_COEX_FREQAVOID,
285 WMI_10_4_SERVICE_PACKET_POWER_SAVE,
286 WMI_10_4_SERVICE_FORCE_FW_HANG,
287 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
288 WMI_10_4_SERVICE_GPIO,
289 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
290 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
291 WMI_10_4_SERVICE_STA_KEEP_ALIVE,
292 WMI_10_4_SERVICE_TX_ENCAP,
293 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
294 WMI_10_4_SERVICE_EARLY_RX,
295 WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
296 WMI_10_4_SERVICE_TT,
297 WMI_10_4_SERVICE_ATF,
298 WMI_10_4_SERVICE_PEER_CACHING,
299 WMI_10_4_SERVICE_COEX_GPIO,
300 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
301 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
302 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
303 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
304 WMI_10_4_SERVICE_MESH_NON_11S,
305 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
306 WMI_10_4_SERVICE_PEER_STATS,
307 WMI_10_4_SERVICE_MESH_11S,
308 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
309 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
310 WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
311 };
314 {
315 #define SVCSTR(x) case x: return #x
410 }
412 #undef SVCSTR
413 }
415 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
416 ((svc_id) < (len) && \
417 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
418 BIT((svc_id) % (sizeof(u32))))
420 #define SVCMAP(x, y, len) \
421 do { \
422 if (WMI_SERVICE_IS_ENABLED((in), (x), (len))) \
423 __set_bit(y, out); \
424 } while (0)
428 {
487 }
491 {
556 }
560 {
661 }
663 #undef SVCMAP
665 /* 2 word representation of MAC addr */
670 u32 word0;
671 u32 word1;
677 u32 init_cmdid;
678 u32 start_scan_cmdid;
679 u32 stop_scan_cmdid;
680 u32 scan_chan_list_cmdid;
681 u32 scan_sch_prio_tbl_cmdid;
682 u32 pdev_set_regdomain_cmdid;
683 u32 pdev_set_channel_cmdid;
684 u32 pdev_set_param_cmdid;
685 u32 pdev_pktlog_enable_cmdid;
686 u32 pdev_pktlog_disable_cmdid;
687 u32 pdev_set_wmm_params_cmdid;
688 u32 pdev_set_ht_cap_ie_cmdid;
689 u32 pdev_set_vht_cap_ie_cmdid;
690 u32 pdev_set_dscp_tid_map_cmdid;
691 u32 pdev_set_quiet_mode_cmdid;
692 u32 pdev_green_ap_ps_enable_cmdid;
693 u32 pdev_get_tpc_config_cmdid;
694 u32 pdev_set_base_macaddr_cmdid;
695 u32 vdev_create_cmdid;
696 u32 vdev_delete_cmdid;
697 u32 vdev_start_request_cmdid;
698 u32 vdev_restart_request_cmdid;
699 u32 vdev_up_cmdid;
700 u32 vdev_stop_cmdid;
701 u32 vdev_down_cmdid;
702 u32 vdev_set_param_cmdid;
703 u32 vdev_install_key_cmdid;
704 u32 peer_create_cmdid;
705 u32 peer_delete_cmdid;
706 u32 peer_flush_tids_cmdid;
707 u32 peer_set_param_cmdid;
708 u32 peer_assoc_cmdid;
709 u32 peer_add_wds_entry_cmdid;
710 u32 peer_remove_wds_entry_cmdid;
711 u32 peer_mcast_group_cmdid;
712 u32 bcn_tx_cmdid;
713 u32 pdev_send_bcn_cmdid;
714 u32 bcn_tmpl_cmdid;
715 u32 bcn_filter_rx_cmdid;
716 u32 prb_req_filter_rx_cmdid;
717 u32 mgmt_tx_cmdid;
718 u32 prb_tmpl_cmdid;
719 u32 addba_clear_resp_cmdid;
720 u32 addba_send_cmdid;
721 u32 addba_status_cmdid;
722 u32 delba_send_cmdid;
723 u32 addba_set_resp_cmdid;
724 u32 send_singleamsdu_cmdid;
725 u32 sta_powersave_mode_cmdid;
726 u32 sta_powersave_param_cmdid;
727 u32 sta_mimo_ps_mode_cmdid;
728 u32 pdev_dfs_enable_cmdid;
729 u32 pdev_dfs_disable_cmdid;
730 u32 roam_scan_mode;
731 u32 roam_scan_rssi_threshold;
732 u32 roam_scan_period;
733 u32 roam_scan_rssi_change_threshold;
734 u32 roam_ap_profile;
735 u32 ofl_scan_add_ap_profile;
736 u32 ofl_scan_remove_ap_profile;
737 u32 ofl_scan_period;
738 u32 p2p_dev_set_device_info;
739 u32 p2p_dev_set_discoverability;
740 u32 p2p_go_set_beacon_ie;
741 u32 p2p_go_set_probe_resp_ie;
742 u32 p2p_set_vendor_ie_data_cmdid;
743 u32 ap_ps_peer_param_cmdid;
744 u32 ap_ps_peer_uapsd_coex_cmdid;
745 u32 peer_rate_retry_sched_cmdid;
746 u32 wlan_profile_trigger_cmdid;
747 u32 wlan_profile_set_hist_intvl_cmdid;
748 u32 wlan_profile_get_profile_data_cmdid;
749 u32 wlan_profile_enable_profile_id_cmdid;
750 u32 wlan_profile_list_profile_id_cmdid;
751 u32 pdev_suspend_cmdid;
752 u32 pdev_resume_cmdid;
753 u32 add_bcn_filter_cmdid;
754 u32 rmv_bcn_filter_cmdid;
755 u32 wow_add_wake_pattern_cmdid;
756 u32 wow_del_wake_pattern_cmdid;
757 u32 wow_enable_disable_wake_event_cmdid;
758 u32 wow_enable_cmdid;
759 u32 wow_hostwakeup_from_sleep_cmdid;
760 u32 rtt_measreq_cmdid;
761 u32 rtt_tsf_cmdid;
762 u32 vdev_spectral_scan_configure_cmdid;
763 u32 vdev_spectral_scan_enable_cmdid;
764 u32 request_stats_cmdid;
765 u32 set_arp_ns_offload_cmdid;
766 u32 network_list_offload_config_cmdid;
767 u32 gtk_offload_cmdid;
768 u32 csa_offload_enable_cmdid;
769 u32 csa_offload_chanswitch_cmdid;
770 u32 chatter_set_mode_cmdid;
771 u32 peer_tid_addba_cmdid;
772 u32 peer_tid_delba_cmdid;
773 u32 sta_dtim_ps_method_cmdid;
774 u32 sta_uapsd_auto_trig_cmdid;
775 u32 sta_keepalive_cmd;
776 u32 echo_cmdid;
777 u32 pdev_utf_cmdid;
778 u32 dbglog_cfg_cmdid;
779 u32 pdev_qvit_cmdid;
780 u32 pdev_ftm_intg_cmdid;
781 u32 vdev_set_keepalive_cmdid;
782 u32 vdev_get_keepalive_cmdid;
783 u32 force_fw_hang_cmdid;
784 u32 gpio_config_cmdid;
785 u32 gpio_output_cmdid;
786 u32 pdev_get_temperature_cmdid;
787 u32 vdev_set_wmm_params_cmdid;
788 u32 tdls_set_state_cmdid;
789 u32 tdls_peer_update_cmdid;
790 u32 adaptive_qcs_cmdid;
791 u32 scan_update_request_cmdid;
792 u32 vdev_standby_response_cmdid;
793 u32 vdev_resume_response_cmdid;
794 u32 wlan_peer_caching_add_peer_cmdid;
795 u32 wlan_peer_caching_evict_peer_cmdid;
796 u32 wlan_peer_caching_restore_peer_cmdid;
797 u32 wlan_peer_caching_print_all_peers_info_cmdid;
798 u32 peer_update_wds_entry_cmdid;
799 u32 peer_add_proxy_sta_entry_cmdid;
800 u32 rtt_keepalive_cmdid;
801 u32 oem_req_cmdid;
802 u32 nan_cmdid;
803 u32 vdev_ratemask_cmdid;
804 u32 qboost_cfg_cmdid;
805 u32 pdev_smart_ant_enable_cmdid;
806 u32 pdev_smart_ant_set_rx_antenna_cmdid;
807 u32 peer_smart_ant_set_tx_antenna_cmdid;
808 u32 peer_smart_ant_set_train_info_cmdid;
809 u32 peer_smart_ant_set_node_config_ops_cmdid;
810 u32 pdev_set_antenna_switch_table_cmdid;
811 u32 pdev_set_ctl_table_cmdid;
812 u32 pdev_set_mimogain_table_cmdid;
813 u32 pdev_ratepwr_table_cmdid;
814 u32 pdev_ratepwr_chainmsk_table_cmdid;
815 u32 pdev_fips_cmdid;
816 u32 tt_set_conf_cmdid;
817 u32 fwtest_cmdid;
818 u32 vdev_atf_request_cmdid;
819 u32 peer_atf_request_cmdid;
820 u32 pdev_get_ani_cck_config_cmdid;
821 u32 pdev_get_ani_ofdm_config_cmdid;
822 u32 pdev_reserve_ast_entry_cmdid;
823 u32 pdev_get_nfcal_power_cmdid;
824 u32 pdev_get_tpc_cmdid;
825 u32 pdev_get_ast_info_cmdid;
826 u32 vdev_set_dscp_tid_map_cmdid;
827 u32 pdev_get_info_cmdid;
828 u32 vdev_get_info_cmdid;
829 u32 vdev_filter_neighbor_rx_packets_cmdid;
830 u32 mu_cal_start_cmdid;
831 u32 set_cca_params_cmdid;
832 u32 pdev_bss_chan_info_request_cmdid;
833 u32 pdev_enable_adaptive_cca_cmdid;
834 u32 ext_resource_cfg_cmdid;
835 };
837 /*
838 * wmi command groups.
839 */
841 /* 0 to 2 are reserved */
844 WMI_GRP_PDEV,
845 WMI_GRP_VDEV,
846 WMI_GRP_PEER,
847 WMI_GRP_MGMT,
848 WMI_GRP_BA_NEG,
849 WMI_GRP_STA_PS,
850 WMI_GRP_DFS,
851 WMI_GRP_ROAM,
852 WMI_GRP_OFL_SCAN,
853 WMI_GRP_P2P,
854 WMI_GRP_AP_PS,
855 WMI_GRP_RATE_CTRL,
856 WMI_GRP_PROFILE,
857 WMI_GRP_SUSPEND,
858 WMI_GRP_BCN_FILTER,
859 WMI_GRP_WOW,
860 WMI_GRP_RTT,
861 WMI_GRP_SPECTRAL,
862 WMI_GRP_STATS,
863 WMI_GRP_ARP_NS_OFL,
864 WMI_GRP_NLO_OFL,
865 WMI_GRP_GTK_OFL,
866 WMI_GRP_CSA_OFL,
867 WMI_GRP_CHATTER,
868 WMI_GRP_TID_ADDBA,
869 WMI_GRP_MISC,
870 WMI_GRP_GPIO,
871 };
873 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
874 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
876 #define WMI_CMD_UNSUPPORTED 0
878 /* Command IDs and command events for MAIN FW. */
882 /* Scan specific commands */
884 WMI_STOP_SCAN_CMDID,
885 WMI_SCAN_CHAN_LIST_CMDID,
886 WMI_SCAN_SCH_PRIO_TBL_CMDID,
888 /* PDEV (physical device) specific commands */
890 WMI_PDEV_SET_CHANNEL_CMDID,
891 WMI_PDEV_SET_PARAM_CMDID,
892 WMI_PDEV_PKTLOG_ENABLE_CMDID,
893 WMI_PDEV_PKTLOG_DISABLE_CMDID,
894 WMI_PDEV_SET_WMM_PARAMS_CMDID,
895 WMI_PDEV_SET_HT_CAP_IE_CMDID,
896 WMI_PDEV_SET_VHT_CAP_IE_CMDID,
897 WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
898 WMI_PDEV_SET_QUIET_MODE_CMDID,
899 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
900 WMI_PDEV_GET_TPC_CONFIG_CMDID,
901 WMI_PDEV_SET_BASE_MACADDR_CMDID,
903 /* VDEV (virtual device) specific commands */
905 WMI_VDEV_DELETE_CMDID,
906 WMI_VDEV_START_REQUEST_CMDID,
907 WMI_VDEV_RESTART_REQUEST_CMDID,
908 WMI_VDEV_UP_CMDID,
909 WMI_VDEV_STOP_CMDID,
910 WMI_VDEV_DOWN_CMDID,
911 WMI_VDEV_SET_PARAM_CMDID,
912 WMI_VDEV_INSTALL_KEY_CMDID,
914 /* peer specific commands */
916 WMI_PEER_DELETE_CMDID,
917 WMI_PEER_FLUSH_TIDS_CMDID,
918 WMI_PEER_SET_PARAM_CMDID,
919 WMI_PEER_ASSOC_CMDID,
920 WMI_PEER_ADD_WDS_ENTRY_CMDID,
921 WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
922 WMI_PEER_MCAST_GROUP_CMDID,
924 /* beacon/management specific commands */
926 WMI_PDEV_SEND_BCN_CMDID,
927 WMI_BCN_TMPL_CMDID,
928 WMI_BCN_FILTER_RX_CMDID,
929 WMI_PRB_REQ_FILTER_RX_CMDID,
930 WMI_MGMT_TX_CMDID,
931 WMI_PRB_TMPL_CMDID,
933 /* commands to directly control BA negotiation directly from host. */
935 WMI_ADDBA_SEND_CMDID,
936 WMI_ADDBA_STATUS_CMDID,
937 WMI_DELBA_SEND_CMDID,
938 WMI_ADDBA_SET_RESP_CMDID,
939 WMI_SEND_SINGLEAMSDU_CMDID,
941 /* Station power save specific config */
943 WMI_STA_POWERSAVE_PARAM_CMDID,
944 WMI_STA_MIMO_PS_MODE_CMDID,
946 /** DFS-specific commands */
948 WMI_PDEV_DFS_DISABLE_CMDID,
950 /* Roaming specific commands */
952 WMI_ROAM_SCAN_RSSI_THRESHOLD,
953 WMI_ROAM_SCAN_PERIOD,
954 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
955 WMI_ROAM_AP_PROFILE,
957 /* offload scan specific commands */
959 WMI_OFL_SCAN_REMOVE_AP_PROFILE,
960 WMI_OFL_SCAN_PERIOD,
962 /* P2P specific commands */
964 WMI_P2P_DEV_SET_DISCOVERABILITY,
965 WMI_P2P_GO_SET_BEACON_IE,
966 WMI_P2P_GO_SET_PROBE_RESP_IE,
967 WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
969 /* AP power save specific config */
971 WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
973 /* Rate-control specific commands */
974 WMI_PEER_RATE_RETRY_SCHED_CMDID =
977 /* WLAN Profiling commands. */
979 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
980 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
981 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
982 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
984 /* Suspend resume command Ids */
986 WMI_PDEV_RESUME_CMDID,
988 /* Beacon filter commands */
990 WMI_RMV_BCN_FILTER_CMDID,
992 /* WOW Specific WMI commands*/
994 WMI_WOW_DEL_WAKE_PATTERN_CMDID,
995 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
996 WMI_WOW_ENABLE_CMDID,
997 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
999 /* RTT measurement related cmd */
1001 WMI_RTT_TSF_CMDID,
1003 /* spectral scan commands */
1005 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1007 /* F/W stats */
1010 /* ARP OFFLOAD REQUEST*/
1013 /* NS offload confid*/
1016 /* GTK offload Specific WMI commands*/
1019 /* CSA offload Specific WMI commands*/
1021 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1023 /* Chatter commands*/
1026 /* addba specific commands */
1028 WMI_PEER_TID_DELBA_CMDID,
1030 /* set station mimo powersave method */
1031 WMI_STA_DTIM_PS_METHOD_CMDID,
1032 /* Configure the Station UAPSD AC Auto Trigger Parameters */
1033 WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1035 /* STA Keep alive parameter configuration,
1036 Requires WMI_SERVICE_STA_KEEP_ALIVE */
1037 WMI_STA_KEEPALIVE_CMD,
1039 /* misc command group */
1041 WMI_PDEV_UTF_CMDID,
1042 WMI_DBGLOG_CFG_CMDID,
1043 WMI_PDEV_QVIT_CMDID,
1044 WMI_PDEV_FTM_INTG_CMDID,
1045 WMI_VDEV_SET_KEEPALIVE_CMDID,
1046 WMI_VDEV_GET_KEEPALIVE_CMDID,
1047 WMI_FORCE_FW_HANG_CMDID,
1049 /* GPIO Configuration */
1051 WMI_GPIO_OUTPUT_CMDID,
1052 };
1056 WMI_READY_EVENTID,
1058 /* Scan specific events */
1061 /* PDEV specific events */
1063 WMI_CHAN_INFO_EVENTID,
1064 WMI_PHYERR_EVENTID,
1066 /* VDEV specific events */
1068 WMI_VDEV_STOPPED_EVENTID,
1069 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1071 /* peer specific events */
1074 /* beacon/mgmt specific events */
1076 WMI_HOST_SWBA_EVENTID,
1077 WMI_TBTTOFFSET_UPDATE_EVENTID,
1079 /* ADDBA Related WMI Events*/
1081 WMI_TX_ADDBA_COMPLETE_EVENTID,
1083 /* Roam event to trigger roaming on host */
1085 WMI_PROFILE_MATCH,
1087 /* WoW */
1090 /* RTT */
1092 WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1093 WMI_RTT_ERROR_REPORT_EVENTID,
1095 /* GTK offload */
1097 WMI_GTK_REKEY_FAIL_EVENTID,
1099 /* CSA IE received event */
1102 /* Misc events */
1104 WMI_PDEV_UTF_EVENTID,
1105 WMI_DEBUG_MESG_EVENTID,
1106 WMI_UPDATE_STATS_EVENTID,
1107 WMI_DEBUG_PRINT_EVENTID,
1108 WMI_DCS_INTERFERENCE_EVENTID,
1109 WMI_PDEV_QVIT_EVENTID,
1110 WMI_WLAN_PROFILE_DATA_EVENTID,
1111 WMI_PDEV_FTM_INTG_EVENTID,
1112 WMI_WLAN_FREQ_AVOID_EVENTID,
1113 WMI_VDEV_GET_KEEPALIVE_EVENTID,
1115 /* GPIO Event */
1117 };
1119 /* Command IDs and command events for 10.X firmware */
1124 /* initialize the wlan sub system */
1125 WMI_10X_INIT_CMDID,
1127 /* Scan specific commands */
1130 WMI_10X_STOP_SCAN_CMDID,
1131 WMI_10X_SCAN_CHAN_LIST_CMDID,
1132 WMI_10X_ECHO_CMDID,
1134 /* PDEV(physical device) specific commands */
1135 WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1136 WMI_10X_PDEV_SET_CHANNEL_CMDID,
1137 WMI_10X_PDEV_SET_PARAM_CMDID,
1138 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1139 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1140 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1141 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1142 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1143 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1144 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1145 WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1146 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1147 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1149 /* VDEV(virtual device) specific commands */
1150 WMI_10X_VDEV_CREATE_CMDID,
1151 WMI_10X_VDEV_DELETE_CMDID,
1152 WMI_10X_VDEV_START_REQUEST_CMDID,
1153 WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1154 WMI_10X_VDEV_UP_CMDID,
1155 WMI_10X_VDEV_STOP_CMDID,
1156 WMI_10X_VDEV_DOWN_CMDID,
1157 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1158 WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1159 WMI_10X_VDEV_SET_PARAM_CMDID,
1160 WMI_10X_VDEV_INSTALL_KEY_CMDID,
1162 /* peer specific commands */
1163 WMI_10X_PEER_CREATE_CMDID,
1164 WMI_10X_PEER_DELETE_CMDID,
1165 WMI_10X_PEER_FLUSH_TIDS_CMDID,
1166 WMI_10X_PEER_SET_PARAM_CMDID,
1167 WMI_10X_PEER_ASSOC_CMDID,
1168 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1169 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1170 WMI_10X_PEER_MCAST_GROUP_CMDID,
1172 /* beacon/management specific commands */
1174 WMI_10X_BCN_TX_CMDID,
1175 WMI_10X_BCN_PRB_TMPL_CMDID,
1176 WMI_10X_BCN_FILTER_RX_CMDID,
1177 WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1178 WMI_10X_MGMT_TX_CMDID,
1180 /* commands to directly control ba negotiation directly from host. */
1181 WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1182 WMI_10X_ADDBA_SEND_CMDID,
1183 WMI_10X_ADDBA_STATUS_CMDID,
1184 WMI_10X_DELBA_SEND_CMDID,
1185 WMI_10X_ADDBA_SET_RESP_CMDID,
1186 WMI_10X_SEND_SINGLEAMSDU_CMDID,
1188 /* Station power save specific config */
1189 WMI_10X_STA_POWERSAVE_MODE_CMDID,
1190 WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1191 WMI_10X_STA_MIMO_PS_MODE_CMDID,
1193 /* set debug log config */
1194 WMI_10X_DBGLOG_CFG_CMDID,
1196 /* DFS-specific commands */
1197 WMI_10X_PDEV_DFS_ENABLE_CMDID,
1198 WMI_10X_PDEV_DFS_DISABLE_CMDID,
1200 /* QVIT specific command id */
1201 WMI_10X_PDEV_QVIT_CMDID,
1203 /* Offload Scan and Roaming related commands */
1204 WMI_10X_ROAM_SCAN_MODE,
1205 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1206 WMI_10X_ROAM_SCAN_PERIOD,
1207 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1208 WMI_10X_ROAM_AP_PROFILE,
1209 WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1210 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1211 WMI_10X_OFL_SCAN_PERIOD,
1213 /* P2P specific commands */
1214 WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1215 WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1216 WMI_10X_P2P_GO_SET_BEACON_IE,
1217 WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1219 /* AP power save specific config */
1220 WMI_10X_AP_PS_PEER_PARAM_CMDID,
1221 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1223 /* Rate-control specific commands */
1224 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1226 /* WLAN Profiling commands. */
1227 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1228 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1229 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1230 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1231 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1233 /* Suspend resume command Ids */
1234 WMI_10X_PDEV_SUSPEND_CMDID,
1235 WMI_10X_PDEV_RESUME_CMDID,
1237 /* Beacon filter commands */
1238 WMI_10X_ADD_BCN_FILTER_CMDID,
1239 WMI_10X_RMV_BCN_FILTER_CMDID,
1241 /* WOW Specific WMI commands*/
1242 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1243 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1244 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1245 WMI_10X_WOW_ENABLE_CMDID,
1246 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1248 /* RTT measurement related cmd */
1249 WMI_10X_RTT_MEASREQ_CMDID,
1250 WMI_10X_RTT_TSF_CMDID,
1252 /* transmit beacon by value */
1253 WMI_10X_PDEV_SEND_BCN_CMDID,
1255 /* F/W stats */
1256 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1257 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1258 WMI_10X_REQUEST_STATS_CMDID,
1260 /* GPIO Configuration */
1261 WMI_10X_GPIO_CONFIG_CMDID,
1262 WMI_10X_GPIO_OUTPUT_CMDID,
1265 };
1269 WMI_10X_READY_EVENTID,
1273 /* Scan specific events */
1275 WMI_10X_ECHO_EVENTID,
1276 WMI_10X_DEBUG_MESG_EVENTID,
1277 WMI_10X_UPDATE_STATS_EVENTID,
1279 /* Instantaneous RSSI event */
1280 WMI_10X_INST_RSSI_STATS_EVENTID,
1282 /* VDEV specific events */
1283 WMI_10X_VDEV_START_RESP_EVENTID,
1284 WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1285 WMI_10X_VDEV_RESUME_REQ_EVENTID,
1286 WMI_10X_VDEV_STOPPED_EVENTID,
1288 /* peer specific events */
1289 WMI_10X_PEER_STA_KICKOUT_EVENTID,
1291 /* beacon/mgmt specific events */
1292 WMI_10X_HOST_SWBA_EVENTID,
1293 WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1294 WMI_10X_MGMT_RX_EVENTID,
1296 /* Channel stats event */
1297 WMI_10X_CHAN_INFO_EVENTID,
1299 /* PHY Error specific WMI event */
1300 WMI_10X_PHYERR_EVENTID,
1302 /* Roam event to trigger roaming on host */
1303 WMI_10X_ROAM_EVENTID,
1305 /* matching AP found from list of profiles */
1306 WMI_10X_PROFILE_MATCH,
1308 /* debug print message used for tracing FW code while debugging */
1309 WMI_10X_DEBUG_PRINT_EVENTID,
1310 /* VI spoecific event */
1311 WMI_10X_PDEV_QVIT_EVENTID,
1312 /* FW code profile data in response to profile request */
1313 WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1315 /*RTT related event ID*/
1316 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1317 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1318 WMI_10X_RTT_ERROR_REPORT_EVENTID,
1320 WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1321 WMI_10X_DCS_INTERFERENCE_EVENTID,
1323 /* TPC config for the current operating channel */
1324 WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1326 WMI_10X_GPIO_INPUT_EVENTID,
1328 };
1333 WMI_10_2_INIT_CMDID,
1335 WMI_10_2_STOP_SCAN_CMDID,
1336 WMI_10_2_SCAN_CHAN_LIST_CMDID,
1337 WMI_10_2_ECHO_CMDID,
1338 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1339 WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1340 WMI_10_2_PDEV_SET_PARAM_CMDID,
1341 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1342 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1343 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1344 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1345 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1346 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1347 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1348 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1349 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1350 WMI_10_2_VDEV_CREATE_CMDID,
1351 WMI_10_2_VDEV_DELETE_CMDID,
1352 WMI_10_2_VDEV_START_REQUEST_CMDID,
1353 WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1354 WMI_10_2_VDEV_UP_CMDID,
1355 WMI_10_2_VDEV_STOP_CMDID,
1356 WMI_10_2_VDEV_DOWN_CMDID,
1357 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1358 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1359 WMI_10_2_VDEV_SET_PARAM_CMDID,
1360 WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1361 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1362 WMI_10_2_PEER_CREATE_CMDID,
1363 WMI_10_2_PEER_DELETE_CMDID,
1364 WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1365 WMI_10_2_PEER_SET_PARAM_CMDID,
1366 WMI_10_2_PEER_ASSOC_CMDID,
1367 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1368 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1369 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1370 WMI_10_2_PEER_MCAST_GROUP_CMDID,
1371 WMI_10_2_BCN_TX_CMDID,
1372 WMI_10_2_BCN_PRB_TMPL_CMDID,
1373 WMI_10_2_BCN_FILTER_RX_CMDID,
1374 WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1375 WMI_10_2_MGMT_TX_CMDID,
1376 WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1377 WMI_10_2_ADDBA_SEND_CMDID,
1378 WMI_10_2_ADDBA_STATUS_CMDID,
1379 WMI_10_2_DELBA_SEND_CMDID,
1380 WMI_10_2_ADDBA_SET_RESP_CMDID,
1381 WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1382 WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1383 WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1384 WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1385 WMI_10_2_DBGLOG_CFG_CMDID,
1386 WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1387 WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1388 WMI_10_2_PDEV_QVIT_CMDID,
1389 WMI_10_2_ROAM_SCAN_MODE,
1390 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1391 WMI_10_2_ROAM_SCAN_PERIOD,
1392 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1393 WMI_10_2_ROAM_AP_PROFILE,
1394 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1395 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1396 WMI_10_2_OFL_SCAN_PERIOD,
1397 WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1398 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1399 WMI_10_2_P2P_GO_SET_BEACON_IE,
1400 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1401 WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1402 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1403 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1404 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1405 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1406 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1407 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1408 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1409 WMI_10_2_PDEV_SUSPEND_CMDID,
1410 WMI_10_2_PDEV_RESUME_CMDID,
1411 WMI_10_2_ADD_BCN_FILTER_CMDID,
1412 WMI_10_2_RMV_BCN_FILTER_CMDID,
1413 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1414 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1415 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1416 WMI_10_2_WOW_ENABLE_CMDID,
1417 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1418 WMI_10_2_RTT_MEASREQ_CMDID,
1419 WMI_10_2_RTT_TSF_CMDID,
1420 WMI_10_2_RTT_KEEPALIVE_CMDID,
1421 WMI_10_2_PDEV_SEND_BCN_CMDID,
1422 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1423 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1424 WMI_10_2_REQUEST_STATS_CMDID,
1425 WMI_10_2_GPIO_CONFIG_CMDID,
1426 WMI_10_2_GPIO_OUTPUT_CMDID,
1427 WMI_10_2_VDEV_RATEMASK_CMDID,
1428 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1429 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1430 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1431 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1432 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1433 WMI_10_2_FORCE_FW_HANG_CMDID,
1434 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1435 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1436 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1437 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1438 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1439 WMI_10_2_PDEV_GET_INFO,
1440 WMI_10_2_VDEV_GET_INFO,
1441 WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1442 WMI_10_2_PEER_ATF_REQUEST_CMDID,
1443 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1444 WMI_10_2_MU_CAL_START_CMDID,
1445 WMI_10_2_SET_LTEU_CONFIG_CMDID,
1446 WMI_10_2_SET_CCA_PARAMS,
1447 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1449 };
1453 WMI_10_2_READY_EVENTID,
1454 WMI_10_2_DEBUG_MESG_EVENTID,
1458 WMI_10_2_ECHO_EVENTID,
1459 WMI_10_2_UPDATE_STATS_EVENTID,
1460 WMI_10_2_INST_RSSI_STATS_EVENTID,
1461 WMI_10_2_VDEV_START_RESP_EVENTID,
1462 WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1463 WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1464 WMI_10_2_VDEV_STOPPED_EVENTID,
1465 WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1466 WMI_10_2_HOST_SWBA_EVENTID,
1467 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1468 WMI_10_2_MGMT_RX_EVENTID,
1469 WMI_10_2_CHAN_INFO_EVENTID,
1470 WMI_10_2_PHYERR_EVENTID,
1471 WMI_10_2_ROAM_EVENTID,
1472 WMI_10_2_PROFILE_MATCH,
1473 WMI_10_2_DEBUG_PRINT_EVENTID,
1474 WMI_10_2_PDEV_QVIT_EVENTID,
1475 WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1476 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1477 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1478 WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1479 WMI_10_2_RTT_KEEPALIVE_EVENTID,
1480 WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1481 WMI_10_2_DCS_INTERFERENCE_EVENTID,
1482 WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1483 WMI_10_2_GPIO_INPUT_EVENTID,
1484 WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1485 WMI_10_2_GENERIC_BUFFER_EVENTID,
1486 WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1487 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1488 WMI_10_2_WDS_PEER_EVENTID,
1489 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1490 WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1491 WMI_10_2_MU_REPORT_EVENTID,
1492 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
1494 };
1499 WMI_10_4_INIT_CMDID,
1501 WMI_10_4_STOP_SCAN_CMDID,
1502 WMI_10_4_SCAN_CHAN_LIST_CMDID,
1503 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1504 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1505 WMI_10_4_ECHO_CMDID,
1506 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1507 WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1508 WMI_10_4_PDEV_SET_PARAM_CMDID,
1509 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1510 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1511 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1512 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1513 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1514 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1515 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1516 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1517 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1518 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1519 WMI_10_4_VDEV_CREATE_CMDID,
1520 WMI_10_4_VDEV_DELETE_CMDID,
1521 WMI_10_4_VDEV_START_REQUEST_CMDID,
1522 WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1523 WMI_10_4_VDEV_UP_CMDID,
1524 WMI_10_4_VDEV_STOP_CMDID,
1525 WMI_10_4_VDEV_DOWN_CMDID,
1526 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1527 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1528 WMI_10_4_VDEV_SET_PARAM_CMDID,
1529 WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1530 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1531 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1532 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1533 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1534 WMI_10_4_PEER_CREATE_CMDID,
1535 WMI_10_4_PEER_DELETE_CMDID,
1536 WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1537 WMI_10_4_PEER_SET_PARAM_CMDID,
1538 WMI_10_4_PEER_ASSOC_CMDID,
1539 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1540 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1541 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1542 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1543 WMI_10_4_PEER_MCAST_GROUP_CMDID,
1544 WMI_10_4_BCN_TX_CMDID,
1545 WMI_10_4_PDEV_SEND_BCN_CMDID,
1546 WMI_10_4_BCN_PRB_TMPL_CMDID,
1547 WMI_10_4_BCN_FILTER_RX_CMDID,
1548 WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1549 WMI_10_4_MGMT_TX_CMDID,
1550 WMI_10_4_PRB_TMPL_CMDID,
1551 WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1552 WMI_10_4_ADDBA_SEND_CMDID,
1553 WMI_10_4_ADDBA_STATUS_CMDID,
1554 WMI_10_4_DELBA_SEND_CMDID,
1555 WMI_10_4_ADDBA_SET_RESP_CMDID,
1556 WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1557 WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1558 WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1559 WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1560 WMI_10_4_DBGLOG_CFG_CMDID,
1561 WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1562 WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1563 WMI_10_4_PDEV_QVIT_CMDID,
1564 WMI_10_4_ROAM_SCAN_MODE,
1565 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1566 WMI_10_4_ROAM_SCAN_PERIOD,
1567 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1568 WMI_10_4_ROAM_AP_PROFILE,
1569 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1570 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1571 WMI_10_4_OFL_SCAN_PERIOD,
1572 WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1573 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1574 WMI_10_4_P2P_GO_SET_BEACON_IE,
1575 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1576 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1577 WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1578 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1579 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1580 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1581 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1582 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1583 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1584 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1585 WMI_10_4_PDEV_SUSPEND_CMDID,
1586 WMI_10_4_PDEV_RESUME_CMDID,
1587 WMI_10_4_ADD_BCN_FILTER_CMDID,
1588 WMI_10_4_RMV_BCN_FILTER_CMDID,
1589 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1590 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1591 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1592 WMI_10_4_WOW_ENABLE_CMDID,
1593 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1594 WMI_10_4_RTT_MEASREQ_CMDID,
1595 WMI_10_4_RTT_TSF_CMDID,
1596 WMI_10_4_RTT_KEEPALIVE_CMDID,
1597 WMI_10_4_OEM_REQ_CMDID,
1598 WMI_10_4_NAN_CMDID,
1599 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1600 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1601 WMI_10_4_REQUEST_STATS_CMDID,
1602 WMI_10_4_GPIO_CONFIG_CMDID,
1603 WMI_10_4_GPIO_OUTPUT_CMDID,
1604 WMI_10_4_VDEV_RATEMASK_CMDID,
1605 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1606 WMI_10_4_GTK_OFFLOAD_CMDID,
1607 WMI_10_4_QBOOST_CFG_CMDID,
1608 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1609 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1610 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1611 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1612 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1613 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1614 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1615 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1616 WMI_10_4_FORCE_FW_HANG_CMDID,
1617 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1618 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1619 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1620 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1621 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1622 WMI_10_4_PDEV_FIPS_CMDID,
1623 WMI_10_4_TT_SET_CONF_CMDID,
1624 WMI_10_4_FWTEST_CMDID,
1625 WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1626 WMI_10_4_PEER_ATF_REQUEST_CMDID,
1627 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1628 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1629 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1630 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1631 WMI_10_4_PDEV_GET_TPC_CMDID,
1632 WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1633 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1634 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1635 WMI_10_4_PDEV_GET_INFO_CMDID,
1636 WMI_10_4_VDEV_GET_INFO_CMDID,
1637 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1638 WMI_10_4_MU_CAL_START_CMDID,
1639 WMI_10_4_SET_CCA_PARAMS_CMDID,
1640 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1641 WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1642 WMI_10_4_VDEV_SET_IE_CMDID,
1643 WMI_10_4_SET_LTEU_CONFIG_CMDID,
1645 };
1649 WMI_10_4_READY_EVENTID,
1650 WMI_10_4_DEBUG_MESG_EVENTID,
1654 WMI_10_4_ECHO_EVENTID,
1655 WMI_10_4_UPDATE_STATS_EVENTID,
1656 WMI_10_4_INST_RSSI_STATS_EVENTID,
1657 WMI_10_4_VDEV_START_RESP_EVENTID,
1658 WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1659 WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1660 WMI_10_4_VDEV_STOPPED_EVENTID,
1661 WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1662 WMI_10_4_HOST_SWBA_EVENTID,
1663 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1664 WMI_10_4_MGMT_RX_EVENTID,
1665 WMI_10_4_CHAN_INFO_EVENTID,
1666 WMI_10_4_PHYERR_EVENTID,
1667 WMI_10_4_ROAM_EVENTID,
1668 WMI_10_4_PROFILE_MATCH,
1669 WMI_10_4_DEBUG_PRINT_EVENTID,
1670 WMI_10_4_PDEV_QVIT_EVENTID,
1671 WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1672 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1673 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1674 WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1675 WMI_10_4_RTT_KEEPALIVE_EVENTID,
1676 WMI_10_4_OEM_CAPABILITY_EVENTID,
1677 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1678 WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1679 WMI_10_4_NAN_EVENTID,
1680 WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1681 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1682 WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1683 WMI_10_4_DCS_INTERFERENCE_EVENTID,
1684 WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1685 WMI_10_4_CSA_HANDLING_EVENTID,
1686 WMI_10_4_GPIO_INPUT_EVENTID,
1687 WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1688 WMI_10_4_GENERIC_BUFFER_EVENTID,
1689 WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1690 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1691 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1692 WMI_10_4_WDS_PEER_EVENTID,
1693 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1694 WMI_10_4_PDEV_FIPS_EVENTID,
1695 WMI_10_4_TT_STATS_EVENTID,
1696 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1697 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1698 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1699 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1700 WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1701 WMI_10_4_PDEV_TPC_EVENTID,
1702 WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1703 WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1704 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1705 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1706 WMI_10_4_MU_REPORT_EVENTID,
1708 };
1722 /* MODE_11AC_VHT160 = 11, */
1728 };
1731 {
1762 /* skip */
1765 /* no default handler to allow compiler to check that the
1766 * enum is fully handled */
1767 };
1770 }
1772 #define WMI_CHAN_LIST_TAG 0x1
1773 #define WMI_SSID_LIST_TAG 0x2
1774 #define WMI_BSSID_LIST_TAG 0x3
1775 #define WMI_IE_TAG 0x4
1778 __le32 mhz;
1779 __le32 band_center_freq1;
1788 __le32 reginfo0;
1790 /* note: power unit is 0.5 dBm */
1791 u8 min_power;
1792 u8 max_power;
1793 u8 reg_power;
1794 u8 reg_classid;
1798 __le32 reginfo1;
1800 u8 antenna_max;
1801 u8 max_tx_power;
1807 u32 freq;
1808 u32 band_center_freq1;
1815 /* note: power unit is 0.5 dBm */
1816 u32 min_power;
1817 u32 max_power;
1818 u32 max_reg_power;
1819 u32 max_antenna_gain;
1820 u32 reg_class_id;
1822 };
1826 WMI_CHANNEL_CHANGE_CAUSE_CSA,
1827 };
1829 #define WMI_CHAN_FLAG_HT40_PLUS (1 << 6)
1830 #define WMI_CHAN_FLAG_PASSIVE (1 << 7)
1831 #define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8)
1832 #define WMI_CHAN_FLAG_AP_DISABLED (1 << 9)
1833 #define WMI_CHAN_FLAG_DFS (1 << 10)
1834 #define WMI_CHAN_FLAG_ALLOW_HT (1 << 11)
1835 #define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12)
1837 /* Indicate reason for channel switch */
1838 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
1842 /* HT Capabilities*/
1847 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3
1849 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4
1853 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
1854 #define WMI_HT_CAP_HT40_SGI 0x0800
1856 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \
1857 WMI_HT_CAP_HT20_SGI | \
1858 WMI_HT_CAP_HT40_SGI | \
1859 WMI_HT_CAP_TX_STBC | \
1860 WMI_HT_CAP_RX_STBC | \
1861 WMI_HT_CAP_LDPC)
1863 /*
1864 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
1865 * field. The fields not defined here are not supported, or reserved.
1866 * Do not change these masks and if you have to add new one follow the
1867 * bitmask as specified by 802.11ac draft.
1868 */
1870 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003
1871 #define WMI_VHT_CAP_RX_LDPC 0x00000010
1872 #define WMI_VHT_CAP_SGI_80MHZ 0x00000020
1873 #define WMI_VHT_CAP_TX_STBC 0x00000080
1874 #define WMI_VHT_CAP_RX_STBC_MASK 0x00000300
1875 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8
1876 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000
1877 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23
1878 #define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000
1879 #define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000
1881 /* The following also refer for max HT AMSDU */
1882 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000
1883 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001
1884 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002
1886 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \
1887 WMI_VHT_CAP_RX_LDPC | \
1888 WMI_VHT_CAP_SGI_80MHZ | \
1889 WMI_VHT_CAP_TX_STBC | \
1890 WMI_VHT_CAP_RX_STBC_MASK | \
1891 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \
1892 WMI_VHT_CAP_RX_FIXED_ANT | \
1893 WMI_VHT_CAP_TX_FIXED_ANT)
1895 /*
1896 * Interested readers refer to Rx/Tx MCS Map definition as defined in
1897 * 802.11ac
1898 */
1899 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1))
1900 #define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000
1901 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16
1925 };
1927 #define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001
1928 #define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002
1929 #define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004
1931 /* regulatory capabilities */
1932 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040
1933 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080
1934 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100
1935 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200
1936 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400
1937 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800
1940 /* regdomain value specified in EEPROM */
1941 __le32 eeprom_rd;
1942 /*regdomain */
1943 __le32 eeprom_rd_ext;
1944 /* CAP1 capabilities bit map. */
1945 __le32 regcap1;
1946 /* REGDMN EEPROM CAP. */
1947 __le32 regcap2;
1948 /* REGDMN MODE */
1949 __le32 wireless_modes;
1950 __le32 low_2ghz_chan;
1951 __le32 high_2ghz_chan;
1952 __le32 low_5ghz_chan;
1953 __le32 high_5ghz_chan;
1960 };
1962 /* structure used by FW for requesting host memory */
1964 /* ID of the request */
1965 __le32 req_id;
1966 /* size of the of each unit */
1967 __le32 unit_size;
1968 /* flags to indicate that
1969 * the number units is dependent
1970 * on number of resources(num vdevs num peers .. etc)
1971 */
1972 __le32 num_unit_info;
1973 /*
1974 * actual number of units to allocate . if flags in the num_unit_info
1975 * indicate that number of units is tied to number of a particular
1976 * resource to allocate then num_units filed is set to 0 and host
1977 * will derive the number units from number of the resources it is
1978 * requesting.
1979 */
1980 __le32 num_units;
1983 /*
1984 * The following struct holds optional payload for
1985 * wmi_service_ready_event,e.g., 11ac pass some of the
1986 * device capability to the host.
1987 */
1989 __le32 sw_version;
1990 __le32 sw_version_1;
1991 __le32 abi_version;
1992 /* WMI_PHY_CAPABILITY */
1993 __le32 phy_capability;
1994 /* Maximum number of frag table entries that SW will populate less 1 */
1995 __le32 max_frag_entry;
1997 __le32 num_rf_chains;
1998 /*
1999 * The following field is only valid for service type
2000 * WMI_SERVICE_11AC
2001 */
2005 __le32 hw_min_tx_power;
2006 __le32 hw_max_tx_power;
2008 __le32 sys_cap_info;
2010 /*
2011 * Max beacon and Probe Response IE offload size
2012 * (includes optional P2P IEs)
2013 */
2014 __le32 max_bcn_ie_size;
2015 /*
2016 * request to host to allocate a chuck of memory and pss it down to FW
2017 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2018 * data structures. Only valid for low latency interfaces like PCIE
2019 * where FW can access this memory directly (or) by DMA.
2020 */
2021 __le32 num_mem_reqs;
2025 /* This is the definition from 10.X firmware branch */
2027 __le32 sw_version;
2028 __le32 abi_version;
2030 /* WMI_PHY_CAPABILITY */
2031 __le32 phy_capability;
2033 /* Maximum number of frag table entries that SW will populate less 1 */
2034 __le32 max_frag_entry;
2036 __le32 num_rf_chains;
2038 /*
2039 * The following field is only valid for service type
2040 * WMI_SERVICE_11AC
2041 */
2045 __le32 hw_min_tx_power;
2046 __le32 hw_max_tx_power;
2050 __le32 sys_cap_info;
2053 /*
2054 * request to host to allocate a chuck of memory and pss it down to FW
2055 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2056 * data structures. Only valid for low latency interfaces like PCIE
2057 * where FW can access this memory directly (or) by DMA.
2058 */
2059 __le32 num_mem_reqs;
2064 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
2065 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
2068 __le32 sw_version;
2069 __le32 abi_version;
2071 __le32 status;
2075 /* number of virtual devices (VAPs) to support */
2076 __le32 num_vdevs;
2078 /* number of peer nodes to support */
2079 __le32 num_peers;
2081 /*
2082 * In offload mode target supports features like WOW, chatter and
2083 * other protocol offloads. In order to support them some
2084 * functionalities like reorder buffering, PN checking need to be
2085 * done in target. This determines maximum number of peers suported
2086 * by target in offload mode
2087 */
2088 __le32 num_offload_peers;
2090 /* For target-based RX reordering */
2091 __le32 num_offload_reorder_bufs;
2093 /* number of keys per peer */
2094 __le32 num_peer_keys;
2096 /* total number of TX/RX data TIDs */
2097 __le32 num_tids;
2099 /*
2100 * max skid for resolving hash collisions
2101 *
2102 * The address search table is sparse, so that if two MAC addresses
2103 * result in the same hash value, the second of these conflicting
2104 * entries can slide to the next index in the address search table,
2105 * and use it, if it is unoccupied. This ast_skid_limit parameter
2106 * specifies the upper bound on how many subsequent indices to search
2107 * over to find an unoccupied space.
2108 */
2109 __le32 ast_skid_limit;
2111 /*
2112 * the nominal chain mask for transmit
2113 *
2114 * The chain mask may be modified dynamically, e.g. to operate AP
2115 * tx with a reduced number of chains if no clients are associated.
2116 * This configuration parameter specifies the nominal chain-mask that
2117 * should be used when not operating with a reduced set of tx chains.
2118 */
2119 __le32 tx_chain_mask;
2121 /*
2122 * the nominal chain mask for receive
2123 *
2124 * The chain mask may be modified dynamically, e.g. for a client
2125 * to use a reduced number of chains for receive if the traffic to
2126 * the client is low enough that it doesn't require downlink MIMO
2127 * or antenna diversity.
2128 * This configuration parameter specifies the nominal chain-mask that
2129 * should be used when not operating with a reduced set of rx chains.
2130 */
2131 __le32 rx_chain_mask;
2133 /*
2134 * what rx reorder timeout (ms) to use for the AC
2135 *
2136 * Each WMM access class (voice, video, best-effort, background) will
2137 * have its own timeout value to dictate how long to wait for missing
2138 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2139 * already been received.
2140 * This parameter specifies the timeout in milliseconds for each
2141 * class.
2142 */
2143 __le32 rx_timeout_pri_vi;
2144 __le32 rx_timeout_pri_vo;
2145 __le32 rx_timeout_pri_be;
2146 __le32 rx_timeout_pri_bk;
2148 /*
2149 * what mode the rx should decap packets to
2150 *
2151 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2152 * THis setting also determines the default TX behavior, however TX
2153 * behavior can be modified on a per VAP basis during VAP init
2154 */
2155 __le32 rx_decap_mode;
2157 /* what is the maximum number of scan requests that can be queued */
2158 __le32 scan_max_pending_reqs;
2160 /* maximum VDEV that could use BMISS offload */
2161 __le32 bmiss_offload_max_vdev;
2163 /* maximum VDEV that could use offload roaming */
2164 __le32 roam_offload_max_vdev;
2166 /* maximum AP profiles that would push to offload roaming */
2167 __le32 roam_offload_max_ap_profiles;
2169 /*
2170 * how many groups to use for mcast->ucast conversion
2171 *
2172 * The target's WAL maintains a table to hold information regarding
2173 * which peers belong to a given multicast group, so that if
2174 * multicast->unicast conversion is enabled, the target can convert
2175 * multicast tx frames to a series of unicast tx frames, to each
2176 * peer within the multicast group.
2177 This num_mcast_groups configuration parameter tells the target how
2178 * many multicast groups to provide storage for within its multicast
2179 * group membership table.
2180 */
2181 __le32 num_mcast_groups;
2183 /*
2184 * size to alloc for the mcast membership table
2185 *
2186 * This num_mcast_table_elems configuration parameter tells the
2187 * target how many peer elements it needs to provide storage for in
2188 * its multicast group membership table.
2189 * These multicast group membership table elements are shared by the
2190 * multicast groups stored within the table.
2191 */
2192 __le32 num_mcast_table_elems;
2194 /*
2195 * whether/how to do multicast->unicast conversion
2196 *
2197 * This configuration parameter specifies whether the target should
2198 * perform multicast --> unicast conversion on transmit, and if so,
2199 * what to do if it finds no entries in its multicast group
2200 * membership table for the multicast IP address in the tx frame.
2201 * Configuration value:
2202 * 0 -> Do not perform multicast to unicast conversion.
2203 * 1 -> Convert multicast frames to unicast, if the IP multicast
2204 * address from the tx frame is found in the multicast group
2205 * membership table. If the IP multicast address is not found,
2206 * drop the frame.
2207 * 2 -> Convert multicast frames to unicast, if the IP multicast
2208 * address from the tx frame is found in the multicast group
2209 * membership table. If the IP multicast address is not found,
2210 * transmit the frame as multicast.
2211 */
2212 __le32 mcast2ucast_mode;
2214 /*
2215 * how much memory to allocate for a tx PPDU dbg log
2216 *
2217 * This parameter controls how much memory the target will allocate
2218 * to store a log of tx PPDU meta-information (how large the PPDU
2219 * was, when it was sent, whether it was successful, etc.)
2220 */
2221 __le32 tx_dbg_log_size;
2223 /* how many AST entries to be allocated for WDS */
2224 __le32 num_wds_entries;
2226 /*
2227 * MAC DMA burst size, e.g., For target PCI limit can be
2228 * 0 -default, 1 256B
2229 */
2230 __le32 dma_burst_size;
2232 /*
2233 * Fixed delimiters to be inserted after every MPDU to
2234 * account for interface latency to avoid underrun.
2235 */
2236 __le32 mac_aggr_delim;
2238 /*
2239 * determine whether target is responsible for detecting duplicate
2240 * non-aggregate MPDU and timing out stale fragments.
2241 *
2242 * A-MPDU reordering is always performed on the target.
2243 *
2244 * 0: target responsible for frag timeout and dup checking
2245 * 1: host responsible for frag timeout and dup checking
2246 */
2247 __le32 rx_skip_defrag_timeout_dup_detection_check;
2249 /*
2250 * Configuration for VoW :
2251 * No of Video Nodes to be supported
2252 * and Max no of descriptors for each Video link (node).
2253 */
2254 __le32 vow_config;
2256 /* maximum VDEV that could use GTK offload */
2257 __le32 gtk_offload_max_vdev;
2259 /* Number of msdu descriptors target should use */
2260 __le32 num_msdu_desc;
2262 /*
2263 * Max. number of Tx fragments per MSDU
2264 * This parameter controls the max number of Tx fragments per MSDU.
2265 * This is sent by the target as part of the WMI_SERVICE_READY event
2266 * and is overriden by the OS shim as required.
2267 */
2268 __le32 max_frag_entries;
2272 /* number of virtual devices (VAPs) to support */
2273 __le32 num_vdevs;
2275 /* number of peer nodes to support */
2276 __le32 num_peers;
2278 /* number of keys per peer */
2279 __le32 num_peer_keys;
2281 /* total number of TX/RX data TIDs */
2282 __le32 num_tids;
2284 /*
2285 * max skid for resolving hash collisions
2286 *
2287 * The address search table is sparse, so that if two MAC addresses
2288 * result in the same hash value, the second of these conflicting
2289 * entries can slide to the next index in the address search table,
2290 * and use it, if it is unoccupied. This ast_skid_limit parameter
2291 * specifies the upper bound on how many subsequent indices to search
2292 * over to find an unoccupied space.
2293 */
2294 __le32 ast_skid_limit;
2296 /*
2297 * the nominal chain mask for transmit
2298 *
2299 * The chain mask may be modified dynamically, e.g. to operate AP
2300 * tx with a reduced number of chains if no clients are associated.
2301 * This configuration parameter specifies the nominal chain-mask that
2302 * should be used when not operating with a reduced set of tx chains.
2303 */
2304 __le32 tx_chain_mask;
2306 /*
2307 * the nominal chain mask for receive
2308 *
2309 * The chain mask may be modified dynamically, e.g. for a client
2310 * to use a reduced number of chains for receive if the traffic to
2311 * the client is low enough that it doesn't require downlink MIMO
2312 * or antenna diversity.
2313 * This configuration parameter specifies the nominal chain-mask that
2314 * should be used when not operating with a reduced set of rx chains.
2315 */
2316 __le32 rx_chain_mask;
2318 /*
2319 * what rx reorder timeout (ms) to use for the AC
2320 *
2321 * Each WMM access class (voice, video, best-effort, background) will
2322 * have its own timeout value to dictate how long to wait for missing
2323 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2324 * already been received.
2325 * This parameter specifies the timeout in milliseconds for each
2326 * class.
2327 */
2328 __le32 rx_timeout_pri_vi;
2329 __le32 rx_timeout_pri_vo;
2330 __le32 rx_timeout_pri_be;
2331 __le32 rx_timeout_pri_bk;
2333 /*
2334 * what mode the rx should decap packets to
2335 *
2336 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2337 * THis setting also determines the default TX behavior, however TX
2338 * behavior can be modified on a per VAP basis during VAP init
2339 */
2340 __le32 rx_decap_mode;
2342 /* what is the maximum number of scan requests that can be queued */
2343 __le32 scan_max_pending_reqs;
2345 /* maximum VDEV that could use BMISS offload */
2346 __le32 bmiss_offload_max_vdev;
2348 /* maximum VDEV that could use offload roaming */
2349 __le32 roam_offload_max_vdev;
2351 /* maximum AP profiles that would push to offload roaming */
2352 __le32 roam_offload_max_ap_profiles;
2354 /*
2355 * how many groups to use for mcast->ucast conversion
2356 *
2357 * The target's WAL maintains a table to hold information regarding
2358 * which peers belong to a given multicast group, so that if
2359 * multicast->unicast conversion is enabled, the target can convert
2360 * multicast tx frames to a series of unicast tx frames, to each
2361 * peer within the multicast group.
2362 This num_mcast_groups configuration parameter tells the target how
2363 * many multicast groups to provide storage for within its multicast
2364 * group membership table.
2365 */
2366 __le32 num_mcast_groups;
2368 /*
2369 * size to alloc for the mcast membership table
2370 *
2371 * This num_mcast_table_elems configuration parameter tells the
2372 * target how many peer elements it needs to provide storage for in
2373 * its multicast group membership table.
2374 * These multicast group membership table elements are shared by the
2375 * multicast groups stored within the table.
2376 */
2377 __le32 num_mcast_table_elems;
2379 /*
2380 * whether/how to do multicast->unicast conversion
2381 *
2382 * This configuration parameter specifies whether the target should
2383 * perform multicast --> unicast conversion on transmit, and if so,
2384 * what to do if it finds no entries in its multicast group
2385 * membership table for the multicast IP address in the tx frame.
2386 * Configuration value:
2387 * 0 -> Do not perform multicast to unicast conversion.
2388 * 1 -> Convert multicast frames to unicast, if the IP multicast
2389 * address from the tx frame is found in the multicast group
2390 * membership table. If the IP multicast address is not found,
2391 * drop the frame.
2392 * 2 -> Convert multicast frames to unicast, if the IP multicast
2393 * address from the tx frame is found in the multicast group
2394 * membership table. If the IP multicast address is not found,
2395 * transmit the frame as multicast.
2396 */
2397 __le32 mcast2ucast_mode;
2399 /*
2400 * how much memory to allocate for a tx PPDU dbg log
2401 *
2402 * This parameter controls how much memory the target will allocate
2403 * to store a log of tx PPDU meta-information (how large the PPDU
2404 * was, when it was sent, whether it was successful, etc.)
2405 */
2406 __le32 tx_dbg_log_size;
2408 /* how many AST entries to be allocated for WDS */
2409 __le32 num_wds_entries;
2411 /*
2412 * MAC DMA burst size, e.g., For target PCI limit can be
2413 * 0 -default, 1 256B
2414 */
2415 __le32 dma_burst_size;
2417 /*
2418 * Fixed delimiters to be inserted after every MPDU to
2419 * account for interface latency to avoid underrun.
2420 */
2421 __le32 mac_aggr_delim;
2423 /*
2424 * determine whether target is responsible for detecting duplicate
2425 * non-aggregate MPDU and timing out stale fragments.
2426 *
2427 * A-MPDU reordering is always performed on the target.
2428 *
2429 * 0: target responsible for frag timeout and dup checking
2430 * 1: host responsible for frag timeout and dup checking
2431 */
2432 __le32 rx_skip_defrag_timeout_dup_detection_check;
2434 /*
2435 * Configuration for VoW :
2436 * No of Video Nodes to be supported
2437 * and Max no of descriptors for each Video link (node).
2438 */
2439 __le32 vow_config;
2441 /* Number of msdu descriptors target should use */
2442 __le32 num_msdu_desc;
2444 /*
2445 * Max. number of Tx fragments per MSDU
2446 * This parameter controls the max number of Tx fragments per MSDU.
2447 * This is sent by the target as part of the WMI_SERVICE_READY event
2448 * and is overriden by the OS shim as required.
2449 */
2450 __le32 max_frag_entries;
2459 };
2463 __le32 max_peer_ext_stats;
2465 __le32 bk_min_free;
2466 __le32 be_min_free;
2467 __le32 vi_min_free;
2468 __le32 vo_min_free;
2469 __le32 feature_mask;
2472 #define NUM_UNITS_IS_NUM_VDEVS BIT(0)
2473 #define NUM_UNITS_IS_NUM_PEERS BIT(1)
2474 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2)
2477 /* Number of virtual devices (VAPs) to support */
2478 __le32 num_vdevs;
2480 /* Number of peer nodes to support */
2481 __le32 num_peers;
2483 /* Number of active peer nodes to support */
2484 __le32 num_active_peers;
2486 /* In offload mode, target supports features like WOW, chatter and other
2487 * protocol offloads. In order to support them some functionalities like
2488 * reorder buffering, PN checking need to be done in target.
2489 * This determines maximum number of peers supported by target in
2490 * offload mode.
2491 */
2492 __le32 num_offload_peers;
2494 /* Number of reorder buffers available for doing target based reorder
2495 * Rx reorder buffering
2496 */
2497 __le32 num_offload_reorder_buffs;
2499 /* Number of keys per peer */
2500 __le32 num_peer_keys;
2502 /* Total number of TX/RX data TIDs */
2503 __le32 num_tids;
2505 /* Max skid for resolving hash collisions.
2506 * The address search table is sparse, so that if two MAC addresses
2507 * result in the same hash value, the second of these conflicting
2508 * entries can slide to the next index in the address search table,
2509 * and use it, if it is unoccupied. This ast_skid_limit parameter
2510 * specifies the upper bound on how many subsequent indices to search
2511 * over to find an unoccupied space.
2512 */
2513 __le32 ast_skid_limit;
2515 /* The nominal chain mask for transmit.
2516 * The chain mask may be modified dynamically, e.g. to operate AP tx
2517 * with a reduced number of chains if no clients are associated.
2518 * This configuration parameter specifies the nominal chain-mask that
2519 * should be used when not operating with a reduced set of tx chains.
2520 */
2521 __le32 tx_chain_mask;
2523 /* The nominal chain mask for receive.
2524 * The chain mask may be modified dynamically, e.g. for a client to use
2525 * a reduced number of chains for receive if the traffic to the client
2526 * is low enough that it doesn't require downlink MIMO or antenna
2527 * diversity. This configuration parameter specifies the nominal
2528 * chain-mask that should be used when not operating with a reduced
2529 * set of rx chains.
2530 */
2531 __le32 rx_chain_mask;
2533 /* What rx reorder timeout (ms) to use for the AC.
2534 * Each WMM access class (voice, video, best-effort, background) will
2535 * have its own timeout value to dictate how long to wait for missing
2536 * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2537 * been received. This parameter specifies the timeout in milliseconds
2538 * for each class.
2539 */
2542 /* What mode the rx should decap packets to.
2543 * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2544 * This setting also determines the default TX behavior, however TX
2545 * behavior can be modified on a per VAP basis during VAP init
2546 */
2547 __le32 rx_decap_mode;
2549 __le32 scan_max_pending_req;
2551 __le32 bmiss_offload_max_vdev;
2553 __le32 roam_offload_max_vdev;
2555 __le32 roam_offload_max_ap_profiles;
2557 /* How many groups to use for mcast->ucast conversion.
2558 * The target's WAL maintains a table to hold information regarding
2559 * which peers belong to a given multicast group, so that if
2560 * multicast->unicast conversion is enabled, the target can convert
2561 * multicast tx frames to a series of unicast tx frames, to each peer
2562 * within the multicast group. This num_mcast_groups configuration
2563 * parameter tells the target how many multicast groups to provide
2564 * storage for within its multicast group membership table.
2565 */
2566 __le32 num_mcast_groups;
2568 /* Size to alloc for the mcast membership table.
2569 * This num_mcast_table_elems configuration parameter tells the target
2570 * how many peer elements it needs to provide storage for in its
2571 * multicast group membership table. These multicast group membership
2572 * table elements are shared by the multicast groups stored within
2573 * the table.
2574 */
2575 __le32 num_mcast_table_elems;
2577 /* Whether/how to do multicast->unicast conversion.
2578 * This configuration parameter specifies whether the target should
2579 * perform multicast --> unicast conversion on transmit, and if so,
2580 * what to do if it finds no entries in its multicast group membership
2581 * table for the multicast IP address in the tx frame.
2582 * Configuration value:
2583 * 0 -> Do not perform multicast to unicast conversion.
2584 * 1 -> Convert multicast frames to unicast, if the IP multicast address
2585 * from the tx frame is found in the multicast group membership
2586 * table. If the IP multicast address is not found, drop the frame
2587 * 2 -> Convert multicast frames to unicast, if the IP multicast address
2588 * from the tx frame is found in the multicast group membership
2589 * table. If the IP multicast address is not found, transmit the
2590 * frame as multicast.
2591 */
2592 __le32 mcast2ucast_mode;
2594 /* How much memory to allocate for a tx PPDU dbg log.
2595 * This parameter controls how much memory the target will allocate to
2596 * store a log of tx PPDU meta-information (how large the PPDU was,
2597 * when it was sent, whether it was successful, etc.)
2598 */
2599 __le32 tx_dbg_log_size;
2601 /* How many AST entries to be allocated for WDS */
2602 __le32 num_wds_entries;
2604 /* MAC DMA burst size. 0 -default, 1 -256B */
2605 __le32 dma_burst_size;
2607 /* Fixed delimiters to be inserted after every MPDU to account for
2608 * interface latency to avoid underrun.
2609 */
2610 __le32 mac_aggr_delim;
2612 /* Determine whether target is responsible for detecting duplicate
2613 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2614 * is always performed on the target.
2615 *
2616 * 0: target responsible for frag timeout and dup checking
2617 * 1: host responsible for frag timeout and dup checking
2618 */
2619 __le32 rx_skip_defrag_timeout_dup_detection_check;
2621 /* Configuration for VoW : No of Video nodes to be supported and max
2622 * no of descriptors for each video link (node).
2623 */
2624 __le32 vow_config;
2626 /* Maximum vdev that could use gtk offload */
2627 __le32 gtk_offload_max_vdev;
2629 /* Number of msdu descriptors target should use */
2630 __le32 num_msdu_desc;
2632 /* Max number of tx fragments per MSDU.
2633 * This parameter controls the max number of tx fragments per MSDU.
2634 * This will passed by target as part of the WMI_SERVICE_READY event
2635 * and is overridden by the OS shim as required.
2636 */
2637 __le32 max_frag_entries;
2639 /* Max number of extended peer stats.
2640 * This parameter controls the max number of peers for which extended
2641 * statistics are supported by target
2642 */
2643 __le32 max_peer_ext_stats;
2645 /* Smart antenna capabilities information.
2646 * 1 - Smart antenna is enabled
2647 * 0 - Smart antenna is disabled
2648 * In future this can contain smart antenna specific capabilities.
2649 */
2650 __le32 smart_ant_cap;
2652 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2653 * during init.
2654 */
2655 __le32 bk_minfree;
2656 __le32 be_minfree;
2657 __le32 vi_minfree;
2658 __le32 vo_minfree;
2660 /* Rx batch mode capability.
2661 * 1 - Rx batch mode enabled
2662 * 0 - Rx batch mode disabled
2663 */
2664 __le32 rx_batchmode;
2666 /* Thermal throttling capability.
2667 * 1 - Capable of thermal throttling
2668 * 0 - Not capable of thermal throttling
2669 */
2670 __le32 tt_support;
2672 /* ATF configuration.
2673 * 1 - Enable ATF
2674 * 0 - Disable ATF
2675 */
2676 __le32 atf_config;
2678 /* Configure padding to manage IP header un-alignment
2679 * 1 - Enable padding
2680 * 0 - Disable padding
2681 */
2682 __le32 iphdr_pad_config;
2684 /* qwrap configuration (bits 15-0)
2685 * 1 - This is qwrap configuration
2686 * 0 - This is not qwrap
2687 *
2688 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
2689 * In order to get ack-RSSI reporting and to specify the tx-rate for
2690 * individual frames, this option must be enabled. This uses an extra
2691 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
2692 */
2693 __le32 qwrap_config;
2696 /**
2697 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
2698 * @WMI_10_4_LTEU_SUPPORT: LTEU config
2699 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
2700 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
2701 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
2702 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
2703 * @WMI_10_4_PEER_STATS: Per station stats
2704 */
2712 };
2715 /* contains enum wmi_host_platform_type */
2716 __le32 host_platform_config;
2717 /* see enum wmi_10_4_feature_mask */
2718 __le32 fw_feature_bitmap;
2719 };
2721 /* strucutre describing host memory chunk. */
2723 /* id of the request that is passed up in service ready */
2724 __le32 req_id;
2725 /* the physical address the memory chunk */
2726 __le32 ptr;
2727 /* size of the chunk */
2728 __le32 size;
2732 __le32 count;
2733 /* some fw revisions require at least 1 chunk regardless of count */
2742 /* _10x stucture is from 10.X FW API */
2759 __le16 freq;
2761 u8 reserved;
2764 /* TLV for channel list */
2767 __le32 num_chan;
2773 __le32 num_bssid;
2779 __le32 ie_len;
2784 __le32 ssid_len;
2790 __le32 num_ssids;
2794 /* prefix used by scan requestor ids on the host */
2795 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
2797 /* prefix used by scan request ids generated on the host */
2798 /* host cycles through the lower 12 bits to generate ids */
2799 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
2801 #define WLAN_SCAN_PARAMS_MAX_SSID 16
2802 #define WLAN_SCAN_PARAMS_MAX_BSSID 4
2803 #define WLAN_SCAN_PARAMS_MAX_IE_LEN 256
2805 /* Values lower than this may be refused by some firmware revisions with a scan
2806 * completion with a timedout reason.
2807 */
2808 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
2810 /* Scan priority numbers must be sequential, starting with 0 */
2813 WMI_SCAN_PRIORITY_LOW,
2814 WMI_SCAN_PRIORITY_MEDIUM,
2815 WMI_SCAN_PRIORITY_HIGH,
2816 WMI_SCAN_PRIORITY_VERY_HIGH,
2817 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */
2818 };
2821 /* Scan ID */
2822 __le32 scan_id;
2823 /* Scan requestor ID */
2824 __le32 scan_req_id;
2825 /* VDEV id(interface) that is requesting scan */
2826 __le32 vdev_id;
2827 /* Scan Priority, input to scan scheduler */
2828 __le32 scan_priority;
2829 /* Scan events subscription */
2830 __le32 notify_scan_events;
2831 /* dwell time in msec on active channels */
2832 __le32 dwell_time_active;
2833 /* dwell time in msec on passive channels */
2834 __le32 dwell_time_passive;
2835 /*
2836 * min time in msec on the BSS channel,only valid if atleast one
2837 * VDEV is active
2838 */
2839 __le32 min_rest_time;
2840 /*
2841 * max rest time in msec on the BSS channel,only valid if at least
2842 * one VDEV is active
2843 */
2844 /*
2845 * the scanner will rest on the bss channel at least min_rest_time
2846 * after min_rest_time the scanner will start checking for tx/rx
2847 * activity on all VDEVs. if there is no activity the scanner will
2848 * switch to off channel. if there is activity the scanner will let
2849 * the radio on the bss channel until max_rest_time expires.at
2850 * max_rest_time scanner will switch to off channel irrespective of
2851 * activity. activity is determined by the idle_time parameter.
2852 */
2853 __le32 max_rest_time;
2854 /*
2855 * time before sending next set of probe requests.
2856 * The scanner keeps repeating probe requests transmission with
2857 * period specified by repeat_probe_time.
2858 * The number of probe requests specified depends on the ssid_list
2859 * and bssid_list
2860 */
2861 __le32 repeat_probe_time;
2862 /* time in msec between 2 consequetive probe requests with in a set. */
2863 __le32 probe_spacing_time;
2864 /*
2865 * data inactivity time in msec on bss channel that will be used by
2866 * scanner for measuring the inactivity.
2867 */
2868 __le32 idle_time;
2869 /* maximum time in msec allowed for scan */
2870 __le32 max_scan_time;
2871 /*
2872 * delay in msec before sending first probe request after switching
2873 * to a channel
2874 */
2875 __le32 probe_delay;
2876 /* Scan control flags */
2877 __le32 scan_ctrl_flags;
2881 /* TLV parameters. These includes channel list, ssid list, bssid list,
2882 * extra ies.
2883 */
2889 __le32 burst_duration_ms;
2893 /* This is the definition from 10.X firmware branch */
2902 };
2906 };
2909 u32 scan_id;
2910 u32 scan_req_id;
2911 u32 vdev_id;
2912 u32 scan_priority;
2913 u32 notify_scan_events;
2914 u32 dwell_time_active;
2915 u32 dwell_time_passive;
2916 u32 min_rest_time;
2917 u32 max_rest_time;
2918 u32 repeat_probe_time;
2919 u32 probe_spacing_time;
2920 u32 idle_time;
2921 u32 max_scan_time;
2922 u32 probe_delay;
2923 u32 scan_ctrl_flags;
2924 u32 burst_duration_ms;
2926 u32 ie_len;
2927 u32 n_channels;
2928 u32 n_ssids;
2929 u32 n_bssids;
2935 };
2937 /* scan control flags */
2939 /* passively scan all channels including active channels */
2940 #define WMI_SCAN_FLAG_PASSIVE 0x1
2941 /* add wild card ssid probe request even though ssid_list is specified. */
2942 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
2943 /* add cck rates to rates/xrate ie for the generated probe request */
2944 #define WMI_SCAN_ADD_CCK_RATES 0x4
2945 /* add ofdm rates to rates/xrate ie for the generated probe request */
2946 #define WMI_SCAN_ADD_OFDM_RATES 0x8
2947 /* To enable indication of Chan load and Noise floor to host */
2948 #define WMI_SCAN_CHAN_STAT_EVENT 0x10
2949 /* Filter Probe request frames */
2950 #define WMI_SCAN_FILTER_PROBE_REQ 0x20
2951 /* When set, DFS channels will not be scanned */
2952 #define WMI_SCAN_BYPASS_DFS_CHN 0x40
2953 /* Different FW scan engine may choose to bail out on errors.
2954 * Allow the driver to have influence over that. */
2955 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
2957 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
2958 #define WMI_SCAN_CLASS_MASK 0xFF000000
2964 };
2967 __le32 scan_req_id;
2968 __le32 scan_id;
2969 __le32 req_type;
2970 __le32 vdev_id;
2974 u32 req_id;
2977 u32 scan_id;
2978 u32 vdev_id;
2980 };
2983 __le32 num_scan_chans;
2988 u32 n_channels;
2990 };
3001 };
3009 /* possibly by high-prio scan */
3015 };
3018 WMI_SCAN_REASON_COMPLETED,
3019 WMI_SCAN_REASON_CANCELLED,
3020 WMI_SCAN_REASON_PREEMPTED,
3021 WMI_SCAN_REASON_TIMEDOUT,
3022 WMI_SCAN_REASON_INTERNAL_FAILURE,
3023 WMI_SCAN_REASON_MAX,
3024 };
3030 __le32 scan_req_id;
3031 __le32 scan_id;
3032 __le32 vdev_id;
3035 /*
3036 * This defines how much headroom is kept in the
3037 * receive frame between the descriptor and the
3038 * payload, in order for the WMI PHY error and
3039 * management handler to insert header contents.
3040 *
3041 * This is in bytes.
3042 */
3043 #define WMI_MGMT_RX_HDR_HEADROOM 52
3045 /*
3046 * This event will be used for sending scan results
3047 * as well as rx mgmt frames to the host. The rx buffer
3048 * will be sent as part of this WMI event. It would be a
3049 * good idea to pass all the fields in the RX status
3050 * descriptor up to the host.
3051 */
3053 __le32 channel;
3054 __le32 snr;
3055 __le32 rate;
3056 __le32 phy_mode;
3057 __le32 buf_len;
3077 __le32 channel;
3078 __le32 snr;
3080 __le32 rate;
3081 __le32 phy_mode;
3082 __le32 buf_len;
3083 __le32 status;
3092 __le64 rx_mac_timestamp;
3095 #define WMI_RX_STATUS_OK 0x00
3096 #define WMI_RX_STATUS_ERR_CRC 0x01
3097 #define WMI_RX_STATUS_ERR_DECRYPT 0x08
3098 #define WMI_RX_STATUS_ERR_MIC 0x10
3099 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20
3100 /* Extension data at the end of mgmt frame */
3101 #define WMI_RX_STATUS_EXT_INFO 0x40
3103 #define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26
3104 #define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24
3105 #define PHY_ERROR_GEN_RADAR 0x05
3107 #define PHY_ERROR_10_4_RADAR_MASK 0x4
3108 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000
3111 PHY_ERROR_UNKNOWN,
3112 PHY_ERROR_SPECTRAL_SCAN,
3113 PHY_ERROR_FALSE_RADAR_EXT,
3114 PHY_ERROR_RADAR
3115 };
3118 __le32 tsf_timestamp;
3119 __le16 freq1;
3120 __le16 freq2;
3121 u8 rssi_combined;
3122 u8 chan_width_mhz;
3123 u8 phy_err_code;
3124 u8 rsvd0;
3127 __le32 buf_len;
3132 __le32 num_phyerrs;
3133 __le32 tsf_l32;
3134 __le32 tsf_u32;
3139 __le32 tsf_l32;
3140 __le32 tsf_u32;
3141 __le16 freq1;
3142 __le16 freq2;
3143 u8 rssi_combined;
3144 u8 chan_width_mhz;
3145 u8 phy_err_code;
3146 u8 rsvd0;
3150 __le32 tsf_timestamp;
3151 __le32 buf_len;
3155 #define PHYERR_TLV_SIG 0xBB
3156 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB
3157 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8
3158 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9
3165 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000
3166 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31
3168 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000
3169 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30
3171 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000
3172 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20
3174 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000
3175 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16
3177 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00
3178 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10
3180 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF
3181 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0
3183 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000
3184 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31
3186 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000
3187 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24
3189 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000
3190 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16
3192 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00
3193 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8
3195 #define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF
3196 #define RADAR_REPORT_REG1_PULSE_DUR_LSB 0
3203 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000
3204 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23
3206 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000
3207 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14
3209 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000
3210 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12
3212 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF
3213 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0
3215 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000
3216 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26
3218 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000
3219 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18
3221 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00
3222 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8
3224 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF
3225 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0
3228 __le16 len;
3229 u8 tag;
3230 u8 sig;
3233 #define DFS_RSSI_POSSIBLY_FALSE 50
3234 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40
3237 __le32 vdev_id;
3239 __le32 tx_rate;
3240 __le32 tx_power;
3241 __le32 buf_len;
3250 __le32 value;
3254 __le32 value;
3258 __le32 reg_domain;
3259 __le32 reg_domain_2G;
3260 __le32 reg_domain_5G;
3261 __le32 conformance_test_limit_2G;
3262 __le32 conformance_test_limit_5G;
3266 /* Uninitialized dfs domain */
3269 /* FCC3 dfs domain */
3272 /* ETSI dfs domain */
3275 /*Japan dfs domain */
3277 };
3280 __le32 reg_domain;
3281 __le32 reg_domain_2G;
3282 __le32 reg_domain_5G;
3283 __le32 conformance_test_limit_2G;
3284 __le32 conformance_test_limit_5G;
3286 /* dfs domain from wmi_dfs_region */
3287 __le32 dfs_domain;
3290 /* Command to set/unset chip in quiet mode */
3292 /* period in TUs */
3293 __le32 period;
3295 /* duration in TUs */
3296 __le32 duration;
3298 /* offset in TUs */
3299 __le32 next_start;
3301 /* enable/disable */
3302 __le32 enabled;
3305 /*
3306 * 802.11g protection mode.
3307 */
3312 };
3316 WMI_RTSCTS_FOR_SECOND_RATESERIES,
3317 WMI_RTSCTS_ACROSS_SW_RETRIES
3318 };
3320 #define WMI_RTSCTS_ENABLED 1
3321 #define WMI_RTSCTS_SET_MASK 0x0f
3322 #define WMI_RTSCTS_SET_LSB 0
3324 #define WMI_RTSCTS_PROFILE_MASK 0xf0
3325 #define WMI_RTSCTS_PROFILE_LSB 4
3330 };
3337 };
3339 /* wmi CSA receive event from beacon frame */
3341 __le32 i_fc_dur;
3342 /* Bit 0-15: FC */
3343 /* Bit 16-31: DUR */
3349 __le32 cswarp_ie;
3353 /* the definition of different PDEV parameters */
3354 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3355 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3356 #define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
3359 u32 tx_chain_mask;
3360 u32 rx_chain_mask;
3361 u32 txpower_limit2g;
3362 u32 txpower_limit5g;
3363 u32 txpower_scale;
3364 u32 beacon_gen_mode;
3365 u32 beacon_tx_mode;
3366 u32 resmgr_offchan_mode;
3367 u32 protection_mode;
3368 u32 dynamic_bw;
3369 u32 non_agg_sw_retry_th;
3370 u32 agg_sw_retry_th;
3371 u32 sta_kickout_th;
3372 u32 ac_aggrsize_scaling;
3373 u32 ltr_enable;
3374 u32 ltr_ac_latency_be;
3375 u32 ltr_ac_latency_bk;
3376 u32 ltr_ac_latency_vi;
3377 u32 ltr_ac_latency_vo;
3378 u32 ltr_ac_latency_timeout;
3379 u32 ltr_sleep_override;
3380 u32 ltr_rx_override;
3381 u32 ltr_tx_activity_timeout;
3382 u32 l1ss_enable;
3383 u32 dsleep_enable;
3384 u32 pcielp_txbuf_flush;
3385 u32 pcielp_txbuf_watermark;
3386 u32 pcielp_txbuf_tmo_en;
3387 u32 pcielp_txbuf_tmo_value;
3388 u32 pdev_stats_update_period;
3389 u32 vdev_stats_update_period;
3390 u32 peer_stats_update_period;
3391 u32 bcnflt_stats_update_period;
3392 u32 pmf_qos;
3393 u32 arp_ac_override;
3394 u32 dcs;
3395 u32 ani_enable;
3396 u32 ani_poll_period;
3397 u32 ani_listen_period;
3398 u32 ani_ofdm_level;
3399 u32 ani_cck_level;
3400 u32 dyntxchain;
3401 u32 proxy_sta;
3402 u32 idle_ps_config;
3403 u32 power_gating_sleep;
3404 u32 fast_channel_reset;
3405 u32 burst_dur;
3406 u32 burst_enable;
3407 u32 cal_period;
3408 u32 aggr_burst;
3409 u32 rx_decap_mode;
3410 u32 smart_antenna_default_antenna;
3411 u32 igmpmld_override;
3412 u32 igmpmld_tid;
3413 u32 antenna_gain;
3414 u32 rx_filter;
3415 u32 set_mcast_to_ucast_tid;
3416 u32 proxy_sta_mode;
3417 u32 set_mcast2ucast_mode;
3418 u32 set_mcast2ucast_buffer;
3419 u32 remove_mcast2ucast_buffer;
3420 u32 peer_sta_ps_statechg_enable;
3421 u32 igmpmld_ac_override;
3422 u32 block_interbss;
3423 u32 set_disable_reset_cmdid;
3424 u32 set_msdu_ttl_cmdid;
3425 u32 set_ppdu_duration_cmdid;
3426 u32 txbf_sound_period_cmdid;
3427 u32 set_promisc_mode_cmdid;
3428 u32 set_burst_mode_cmdid;
3429 u32 en_stats;
3430 u32 mu_group_policy;
3431 u32 noise_detection;
3432 u32 noise_threshold;
3433 u32 dpd_enable;
3434 u32 set_mcast_bcast_echo;
3435 u32 atf_strict_sch;
3436 u32 atf_sched_duration;
3437 u32 ant_plzn;
3438 u32 mgmt_retry_limit;
3439 u32 sensitivity_level;
3440 u32 signed_txpower_2g;
3441 u32 signed_txpower_5g;
3442 u32 enable_per_tid_amsdu;
3443 u32 enable_per_tid_ampdu;
3444 u32 cca_threshold;
3445 u32 rts_fixed_rate;
3446 u32 pdev_reset;
3447 u32 wapi_mbssid_offset;
3448 u32 arp_srcaddr;
3449 u32 arp_dstaddr;
3450 u32 enable_btcoex;
3451 };
3453 #define WMI_PDEV_PARAM_UNSUPPORTED 0
3456 /* TX chain mask */
3458 /* RX chain mask */
3459 WMI_PDEV_PARAM_RX_CHAIN_MASK,
3460 /* TX power limit for 2G Radio */
3461 WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3462 /* TX power limit for 5G Radio */
3463 WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3464 /* TX power scale */
3465 WMI_PDEV_PARAM_TXPOWER_SCALE,
3466 /* Beacon generation mode . 0: host, 1: target */
3467 WMI_PDEV_PARAM_BEACON_GEN_MODE,
3468 /* Beacon generation mode . 0: staggered 1: bursted */
3469 WMI_PDEV_PARAM_BEACON_TX_MODE,
3470 /*
3471 * Resource manager off chan mode .
3472 * 0: turn off off chan mode. 1: turn on offchan mode
3473 */
3474 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3475 /*
3476 * Protection mode:
3477 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3478 */
3479 WMI_PDEV_PARAM_PROTECTION_MODE,
3480 /*
3481 * Dynamic bandwidth - 0: disable, 1: enable
3482 *
3483 * When enabled HW rate control tries different bandwidths when
3484 * retransmitting frames.
3485 */
3486 WMI_PDEV_PARAM_DYNAMIC_BW,
3487 /* Non aggregrate/ 11g sw retry threshold.0-disable */
3488 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3489 /* aggregrate sw retry threshold. 0-disable*/
3490 WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3491 /* Station kickout threshold (non of consecutive failures).0-disable */
3492 WMI_PDEV_PARAM_STA_KICKOUT_TH,
3493 /* Aggerate size scaling configuration per AC */
3494 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3495 /* LTR enable */
3496 WMI_PDEV_PARAM_LTR_ENABLE,
3497 /* LTR latency for BE, in us */
3498 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3499 /* LTR latency for BK, in us */
3500 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3501 /* LTR latency for VI, in us */
3502 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3503 /* LTR latency for VO, in us */
3504 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3505 /* LTR AC latency timeout, in ms */
3506 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3507 /* LTR platform latency override, in us */
3508 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3509 /* LTR-RX override, in us */
3510 WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3511 /* Tx activity timeout for LTR, in us */
3512 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3513 /* L1SS state machine enable */
3514 WMI_PDEV_PARAM_L1SS_ENABLE,
3515 /* Deep sleep state machine enable */
3516 WMI_PDEV_PARAM_DSLEEP_ENABLE,
3517 /* RX buffering flush enable */
3518 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3519 /* RX buffering matermark */
3520 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3521 /* RX buffering timeout enable */
3522 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3523 /* RX buffering timeout value */
3524 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3525 /* pdev level stats update period in ms */
3526 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3527 /* vdev level stats update period in ms */
3528 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3529 /* peer level stats update period in ms */
3530 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3531 /* beacon filter status update period */
3532 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3533 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3534 WMI_PDEV_PARAM_PMF_QOS,
3535 /* Access category on which ARP frames are sent */
3536 WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3537 /* DCS configuration */
3538 WMI_PDEV_PARAM_DCS,
3539 /* Enable/Disable ANI on target */
3540 WMI_PDEV_PARAM_ANI_ENABLE,
3541 /* configure the ANI polling period */
3542 WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3543 /* configure the ANI listening period */
3544 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3545 /* configure OFDM immunity level */
3546 WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3547 /* configure CCK immunity level */
3548 WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3549 /* Enable/Disable CDD for 1x1 STAs in rate control module */
3550 WMI_PDEV_PARAM_DYNTXCHAIN,
3551 /* Enable/Disable proxy STA */
3552 WMI_PDEV_PARAM_PROXY_STA,
3553 /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3554 WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3555 /* Enable/Disable power gating sleep */
3556 WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3557 };
3560 /* TX chian mask */
3562 /* RX chian mask */
3563 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3564 /* TX power limit for 2G Radio */
3565 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3566 /* TX power limit for 5G Radio */
3567 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3568 /* TX power scale */
3569 WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3570 /* Beacon generation mode . 0: host, 1: target */
3571 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3572 /* Beacon generation mode . 0: staggered 1: bursted */
3573 WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3574 /*
3575 * Resource manager off chan mode .
3576 * 0: turn off off chan mode. 1: turn on offchan mode
3577 */
3578 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3579 /*
3580 * Protection mode:
3581 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3582 */
3583 WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3584 /* Dynamic bandwidth 0: disable 1: enable */
3585 WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3586 /* Non aggregrate/ 11g sw retry threshold.0-disable */
3587 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3588 /* aggregrate sw retry threshold. 0-disable*/
3589 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3590 /* Station kickout threshold (non of consecutive failures).0-disable */
3591 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3592 /* Aggerate size scaling configuration per AC */
3593 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3594 /* LTR enable */
3595 WMI_10X_PDEV_PARAM_LTR_ENABLE,
3596 /* LTR latency for BE, in us */
3597 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3598 /* LTR latency for BK, in us */
3599 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3600 /* LTR latency for VI, in us */
3601 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3602 /* LTR latency for VO, in us */
3603 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3604 /* LTR AC latency timeout, in ms */
3605 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3606 /* LTR platform latency override, in us */
3607 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3608 /* LTR-RX override, in us */
3609 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3610 /* Tx activity timeout for LTR, in us */
3611 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3612 /* L1SS state machine enable */
3613 WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3614 /* Deep sleep state machine enable */
3615 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3616 /* pdev level stats update period in ms */
3617 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3618 /* vdev level stats update period in ms */
3619 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3620 /* peer level stats update period in ms */
3621 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3622 /* beacon filter status update period */
3623 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3624 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3625 WMI_10X_PDEV_PARAM_PMF_QOS,
3626 /* Access category on which ARP and DHCP frames are sent */
3627 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3628 /* DCS configuration */
3629 WMI_10X_PDEV_PARAM_DCS,
3630 /* Enable/Disable ANI on target */
3631 WMI_10X_PDEV_PARAM_ANI_ENABLE,
3632 /* configure the ANI polling period */
3633 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
3634 /* configure the ANI listening period */
3635 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
3636 /* configure OFDM immunity level */
3637 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
3638 /* configure CCK immunity level */
3639 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
3640 /* Enable/Disable CDD for 1x1 STAs in rate control module */
3641 WMI_10X_PDEV_PARAM_DYNTXCHAIN,
3642 /* Enable/Disable Fast channel reset*/
3643 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
3644 /* Set Bursting DUR */
3645 WMI_10X_PDEV_PARAM_BURST_DUR,
3646 /* Set Bursting Enable*/
3647 WMI_10X_PDEV_PARAM_BURST_ENABLE,
3649 /* following are available as of firmware 10.2 */
3650 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
3651 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
3652 WMI_10X_PDEV_PARAM_IGMPMLD_TID,
3653 WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
3654 WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
3655 WMI_10X_PDEV_PARAM_RX_FILTER,
3656 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
3657 WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
3658 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
3659 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
3660 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
3661 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
3662 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
3663 WMI_10X_PDEV_PARAM_CAL_PERIOD
3664 };
3668 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
3669 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
3670 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
3671 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
3672 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
3673 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
3674 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3675 WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
3676 WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
3677 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3678 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
3679 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
3680 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3681 WMI_10_4_PDEV_PARAM_LTR_ENABLE,
3682 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
3683 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
3684 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
3685 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
3686 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3687 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3688 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
3689 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3690 WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
3691 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
3692 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3693 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3694 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3695 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3696 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3697 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3698 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3699 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3700 WMI_10_4_PDEV_PARAM_PMF_QOS,
3701 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
3702 WMI_10_4_PDEV_PARAM_DCS,
3703 WMI_10_4_PDEV_PARAM_ANI_ENABLE,
3704 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
3705 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
3706 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
3707 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
3708 WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
3709 WMI_10_4_PDEV_PARAM_PROXY_STA,
3710 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
3711 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
3712 WMI_10_4_PDEV_PARAM_AGGR_BURST,
3713 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
3714 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
3715 WMI_10_4_PDEV_PARAM_BURST_DUR,
3716 WMI_10_4_PDEV_PARAM_BURST_ENABLE,
3717 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
3718 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
3719 WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
3720 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
3721 WMI_10_4_PDEV_PARAM_RX_FILTER,
3722 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
3723 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
3724 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
3725 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
3726 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
3727 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
3728 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
3729 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
3730 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
3731 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
3732 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
3733 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
3734 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
3735 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
3736 WMI_10_4_PDEV_PARAM_EN_STATS,
3737 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
3738 WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
3739 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
3740 WMI_10_4_PDEV_PARAM_DPD_ENABLE,
3741 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
3742 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
3743 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
3744 WMI_10_4_PDEV_PARAM_ANT_PLZN,
3745 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
3746 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
3747 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
3748 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
3749 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
3750 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
3751 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
3752 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
3753 WMI_10_4_PDEV_PARAM_CAL_PERIOD,
3754 WMI_10_4_PDEV_PARAM_PDEV_RESET,
3755 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
3756 WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
3757 WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
3758 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
3759 WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
3760 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
3761 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
3762 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
3763 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
3764 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
3765 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
3766 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
3767 };
3770 __le32 param_id;
3771 __le32 param_value;
3774 /* valid period is 1 ~ 60000ms, unit in millisecond */
3775 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
3778 /* parameter */
3779 __le32 param;
3782 #define WMI_TPC_CONFIG_PARAM 1
3783 #define WMI_TPC_RATE_MAX 160
3784 #define WMI_TPC_TX_N_CHAIN 4
3785 #define WMI_TPC_PREAM_TABLE_MAX 10
3786 #define WMI_TPC_FLAG 3
3787 #define WMI_TPC_BUF_SIZE 10
3793 };
3799 };
3802 __le32 reg_domain;
3803 __le32 chan_freq;
3804 __le32 phy_mode;
3805 __le32 twice_antenna_reduction;
3806 __le32 twice_max_rd_power;
3807 a_sle32 twice_antenna_gain;
3808 __le32 power_limit;
3809 __le32 rate_max;
3810 __le32 num_tx_chain;
3811 __le32 ctl;
3812 __le32 flags;
3820 /* Transmit power scale factor. */
3828 };
3831 /* number of channels */
3832 __le32 num_chan;
3833 /* array of channels */
3837 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
3840 /* message buffer, NULL terminated */
3845 /* P2P device */
3847 /* P2P client */
3848 VDEV_SUBTYPE_P2PCLI,
3849 /* P2P GO */
3850 VDEV_SUBTYPE_P2PGO,
3851 /* BT3.0 HS */
3852 VDEV_SUBTYPE_BT,
3853 };
3856 /* idnore power , only use flags , mode and freq */
3861 __le32 ev_bitmap;
3864 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
3865 #define WMI_DSCP_MAP_MAX (64)
3867 /* map indicating DSCP to TID conversion */
3872 WMI_SET_MCAST_RATE,
3873 WMI_SET_BCAST_RATE
3874 };
3878 __le32 rate;
3882 __le32 cwmin;
3883 __le32 cwmax;
3884 __le32 aifs;
3885 __le32 txop;
3886 __le32 acm;
3887 __le32 no_ack;
3898 u32 cwmin;
3899 u32 cwmax;
3900 u32 aifs;
3901 u32 txop;
3902 u32 acm;
3903 u32 no_ack;
3904 };
3911 };
3914 /* Num HTT cookies queued to dispatch list */
3915 __le32 comp_queued;
3917 /* Num HTT cookies dispatched */
3918 __le32 comp_delivered;
3920 /* Num MSDU queued to WAL */
3921 __le32 msdu_enqued;
3923 /* Num MPDU queue to WAL */
3924 __le32 mpdu_enqued;
3926 /* Num MSDUs dropped by WMM limit */
3927 __le32 wmm_drop;
3929 /* Num Local frames queued */
3930 __le32 local_enqued;
3932 /* Num Local frames done */
3933 __le32 local_freed;
3935 /* Num queued to HW */
3936 __le32 hw_queued;
3938 /* Num PPDU reaped from HW */
3939 __le32 hw_reaped;
3941 /* Num underruns */
3942 __le32 underrun;
3944 /* Num PPDUs cleaned up in TX abort */
3945 __le32 tx_abort;
3947 /* Num MPDUs requed by SW */
3948 __le32 mpdus_requed;
3950 /* excessive retries */
3951 __le32 tx_ko;
3953 /* data hw rate code */
3954 __le32 data_rc;
3956 /* Scheduler self triggers */
3957 __le32 self_triggers;
3959 /* frames dropped due to excessive sw retries */
3960 __le32 sw_retry_failure;
3962 /* illegal rate phy errors */
3963 __le32 illgl_rate_phy_err;
3965 /* wal pdev continous xretry */
3966 __le32 pdev_cont_xretry;
3968 /* wal pdev continous xretry */
3969 __le32 pdev_tx_timeout;
3971 /* wal pdev resets */
3972 __le32 pdev_resets;
3974 /* frames dropped due to non-availability of stateless TIDs */
3975 __le32 stateless_tid_alloc_failure;
3977 __le32 phy_underrun;
3979 /* MPDU is more than txop limit */
3980 __le32 txop_ovf;
3984 /* Num HTT cookies queued to dispatch list */
3985 __le32 comp_queued;
3987 /* Num HTT cookies dispatched */
3988 __le32 comp_delivered;
3990 /* Num MSDU queued to WAL */
3991 __le32 msdu_enqued;
3993 /* Num MPDU queue to WAL */
3994 __le32 mpdu_enqued;
3996 /* Num MSDUs dropped by WMM limit */
3997 __le32 wmm_drop;
3999 /* Num Local frames queued */
4000 __le32 local_enqued;
4002 /* Num Local frames done */
4003 __le32 local_freed;
4005 /* Num queued to HW */
4006 __le32 hw_queued;
4008 /* Num PPDU reaped from HW */
4009 __le32 hw_reaped;
4011 /* Num underruns */
4012 __le32 underrun;
4014 /* HW Paused. */
4015 __le32 hw_paused;
4017 /* Num PPDUs cleaned up in TX abort */
4018 __le32 tx_abort;
4020 /* Num MPDUs requed by SW */
4021 __le32 mpdus_requed;
4023 /* excessive retries */
4024 __le32 tx_ko;
4026 /* data hw rate code */
4027 __le32 data_rc;
4029 /* Scheduler self triggers */
4030 __le32 self_triggers;
4032 /* frames dropped due to excessive sw retries */
4033 __le32 sw_retry_failure;
4035 /* illegal rate phy errors */
4036 __le32 illgl_rate_phy_err;
4038 /* wal pdev continuous xretry */
4039 __le32 pdev_cont_xretry;
4041 /* wal pdev tx timeouts */
4042 __le32 pdev_tx_timeout;
4044 /* wal pdev resets */
4045 __le32 pdev_resets;
4047 /* frames dropped due to non-availability of stateless TIDs */
4048 __le32 stateless_tid_alloc_failure;
4050 __le32 phy_underrun;
4052 /* MPDU is more than txop limit */
4053 __le32 txop_ovf;
4055 /* Number of Sequences posted */
4056 __le32 seq_posted;
4058 /* Number of Sequences failed queueing */
4059 __le32 seq_failed_queueing;
4061 /* Number of Sequences completed */
4062 __le32 seq_completed;
4064 /* Number of Sequences restarted */
4065 __le32 seq_restarted;
4067 /* Number of MU Sequences posted */
4068 __le32 mu_seq_posted;
4070 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4071 __le32 mpdus_sw_flush;
4073 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4074 __le32 mpdus_hw_filter;
4076 /* Num MPDUs truncated by PDG
4077 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4078 */
4079 __le32 mpdus_truncated;
4081 /* Num MPDUs that was tried but didn't receive ACK or BA */
4082 __le32 mpdus_ack_failed;
4084 /* Num MPDUs that was dropped due to expiry. */
4085 __le32 mpdus_expired;
4089 /* Cnts any change in ring routing mid-ppdu */
4090 __le32 mid_ppdu_route_change;
4092 /* Total number of statuses processed */
4093 __le32 status_rcvd;
4095 /* Extra frags on rings 0-3 */
4096 __le32 r0_frags;
4097 __le32 r1_frags;
4098 __le32 r2_frags;
4099 __le32 r3_frags;
4101 /* MSDUs / MPDUs delivered to HTT */
4102 __le32 htt_msdus;
4103 __le32 htt_mpdus;
4105 /* MSDUs / MPDUs delivered to local stack */
4106 __le32 loc_msdus;
4107 __le32 loc_mpdus;
4109 /* AMSDUs that have more MSDUs than the status ring size */
4110 __le32 oversize_amsdu;
4112 /* Number of PHY errors */
4113 __le32 phy_errs;
4115 /* Number of PHY errors drops */
4116 __le32 phy_err_drop;
4118 /* Number of mpdu errors - FCS, MIC, ENC etc. */
4119 __le32 mpdu_errs;
4123 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4124 __le32 dummy;
4134 };
4141 };
4144 __le16 cfg_retry_count;
4145 __le16 retry_count;
4146 };
4149 __le32 stats_id;
4151 __le32 vdev_id;
4153 /* peer MAC address */
4156 /* Instantaneous RSSI arguments */
4160 /* Suspend option */
4162 /* suspend */
4163 WMI_PDEV_SUSPEND,
4165 /* suspend and disable all interrupts */
4166 WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4167 };
4170 /* suspend option sent to target */
4171 __le32 suspend_opt;
4176 /*
4177 * number of pdev stats event structures
4178 * (wmi_pdev_stats) 0 or 1
4179 */
4180 __le32 num_pdev_stats;
4181 /*
4182 * number of vdev stats event structures
4183 * (wmi_vdev_stats) 0 or max vdevs
4184 */
4185 __le32 num_vdev_stats;
4186 /*
4187 * number of peer stats event structures
4188 * (wmi_peer_stats) 0 or max peers
4189 */
4190 __le32 num_peer_stats;
4191 __le32 num_bcnflt_stats;
4192 /*
4193 * followed by
4194 * num_pdev_stats * size of(struct wmi_pdev_stats)
4195 * num_vdev_stats * size of(struct wmi_vdev_stats)
4196 * num_peer_stats * size of(struct wmi_peer_stats)
4197 *
4198 * By having a zero sized array, the pointer to data area
4199 * becomes available without increasing the struct size
4200 */
4206 __le32 num_pdev_stats;
4207 __le32 num_pdev_ext_stats;
4208 __le32 num_vdev_stats;
4209 __le32 num_peer_stats;
4210 __le32 num_bcnflt_stats;
4214 /*
4215 * PDEV statistics
4216 * TODO: add all PDEV stats here
4217 */
4219 __le32 chan_nf;
4220 __le32 tx_frame_count;
4221 __le32 rx_frame_count;
4222 __le32 rx_clear_count;
4223 __le32 cycle_count;
4224 __le32 phy_err_count;
4225 __le32 chan_tx_pwr;
4236 __le32 ack_rx_bad;
4237 __le32 rts_bad;
4238 __le32 rts_good;
4239 __le32 fcs_bad;
4240 __le32 no_beacons;
4241 __le32 mib_int_count;
4253 __le32 dram_free;
4254 __le32 iram_free;
4260 __le32 mc_drop;
4262 __le32 pdev_rx_timeout;
4272 __le32 rx_ovfl_errs;
4274 __le32 sram_free_size;
4278 /*
4279 * VDEV statistics
4280 * TODO: add all VDEV stats here
4281 */
4283 __le32 vdev_id;
4286 /*
4287 * peer statistics.
4288 * TODO: add more stats
4289 */
4292 __le32 peer_rssi;
4293 __le32 peer_tx_rate;
4298 __le32 peer_rx_rate;
4303 __le32 peer_rx_rate;
4304 __le32 current_per;
4305 __le32 retries;
4306 __le32 tx_rate_count;
4307 __le32 max_4ms_frame_len;
4308 __le32 total_sub_frames;
4309 __le32 tx_bytes;
4316 __le32 peer_rssi_changed;
4321 __le32 peer_rssi_changed;
4322 __le32 rx_duration;
4327 __le32 peer_rssi;
4328 __le32 peer_rssi_seq_num;
4329 __le32 peer_tx_rate;
4330 __le32 peer_rx_rate;
4331 __le32 current_per;
4332 __le32 retries;
4333 __le32 tx_rate_count;
4334 __le32 max_4ms_frame_len;
4335 __le32 total_sub_frames;
4336 __le32 tx_bytes;
4339 __le32 peer_rssi_changed;
4344 __le32 inactive_time;
4345 __le32 peer_chain_rssi;
4346 __le32 rx_duration;
4351 __le32 vdev_id;
4352 __le32 bss_bcns_dropped;
4353 __le32 bss_bcn_delivered;
4357 __le32 bcns_dropped;
4358 __le32 bcns_delivered;
4359 __le32 active_filters;
4364 __le32 rx_rssi_comb;
4368 __le32 ack_rssi;
4372 __le32 vdev_id;
4373 __le32 vdev_type;
4374 __le32 vdev_subtype;
4383 };
4386 WMI_VDEV_SUBTYPE_NONE,
4387 WMI_VDEV_SUBTYPE_P2P_DEVICE,
4388 WMI_VDEV_SUBTYPE_P2P_CLIENT,
4389 WMI_VDEV_SUBTYPE_P2P_GO,
4390 WMI_VDEV_SUBTYPE_PROXY_STA,
4391 WMI_VDEV_SUBTYPE_MESH_11S,
4392 WMI_VDEV_SUBTYPE_MESH_NON_11S,
4393 };
4401 };
4410 };
4420 };
4422 /* values for vdev_subtype */
4424 /* values for vdev_start_request flags */
4425 /*
4426 * Indicates that AP VDEV uses hidden ssid. only valid for
4427 * AP/GO */
4428 #define WMI_VDEV_START_HIDDEN_SSID (1 << 0)
4429 /*
4430 * Indicates if robust management frame/management frame
4431 * protection is enabled. For GO/AP vdevs, it indicates that
4432 * it may support station/client associations with RMF enabled.
4433 * For STA/client vdevs, it indicates that sta will
4434 * associate with AP with RMF enabled. */
4435 #define WMI_VDEV_START_PMF_ENABLED (1 << 1)
4445 /* WMI channel */
4447 /* unique id identifying the VDEV, generated by the caller */
4448 __le32 vdev_id;
4449 /* requestor id identifying the caller module */
4450 __le32 requestor_id;
4451 /* beacon interval from received beacon */
4452 __le32 beacon_interval;
4453 /* DTIM Period from the received beacon */
4454 __le32 dtim_period;
4455 /* Flags */
4456 __le32 flags;
4457 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4459 /* beacon/probe reponse xmit rate. Applicable for SoftAP. */
4460 __le32 bcn_tx_rate;
4461 /* beacon/probe reponse xmit power. Applicable for SoftAP. */
4462 __le32 bcn_tx_power;
4463 /* number of p2p NOA descriptor(s) from scan entry */
4464 __le32 num_noa_descriptors;
4465 /*
4466 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4467 * During CAC, Our HW shouldn't ack ditected frames
4468 */
4469 __le32 disable_hw_ack;
4470 /* actual p2p NOA descriptor from scan entry */
4479 u32 vdev_id;
4481 u32 bcn_intval;
4482 u32 dtim_period;
4484 u32 ssid_len;
4485 u32 bcn_tx_rate;
4486 u32 bcn_tx_power;
4490 };
4493 /* unique id identifying the VDEV, generated by the caller */
4494 __le32 vdev_id;
4498 __le32 vdev_id;
4499 __le32 vdev_assoc_id;
4504 __le32 vdev_id;
4508 __le32 vdev_id;
4512 /* unique id identifying the VDEV, generated by the caller */
4513 __le32 vdev_id;
4517 /* unique id identifying the VDEV, generated by the caller */
4518 __le32 vdev_id;
4522 __le32 vdev_id;
4523 __le32 param_id;
4524 __le32 param_value;
4527 #define WMI_MAX_KEY_INDEX 3
4528 #define WMI_MAX_KEY_LEN 32
4530 #define WMI_KEY_PAIRWISE 0x00
4531 #define WMI_KEY_GROUP 0x01
4535 __le32 key_seq_counter_l;
4536 __le32 key_seq_counter_h;
4540 #define WMI_CIPHER_WEP 0x1
4541 #define WMI_CIPHER_TKIP 0x2
4542 #define WMI_CIPHER_AES_OCB 0x3
4543 #define WMI_CIPHER_AES_CCM 0x4
4544 #define WMI_CIPHER_WAPI 0x5
4545 #define WMI_CIPHER_CKIP 0x6
4546 #define WMI_CIPHER_AES_CMAC 0x7
4549 __le32 vdev_id;
4551 __le32 key_idx;
4552 __le32 key_flags;
4559 __le32 key_len;
4560 __le32 key_txmic_len;
4561 __le32 key_rxmic_len;
4563 /* contains key followed by tx mic followed by rx mic */
4568 u32 vdev_id;
4570 u32 key_idx;
4571 u32 key_flags;
4572 u32 key_cipher;
4573 u32 key_len;
4574 u32 key_txmic_len;
4575 u32 key_rxmic_len;
4577 };
4579 /*
4580 * vdev fixed rate format:
4581 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
4582 * - nss - b5:b4 - ss number (0 mean 1ss)
4583 * - rate_mcs - b3:b0 - as below
4584 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
4585 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
4586 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
4587 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
4588 * HT/VHT: MCS index
4589 */
4591 /* Preamble types to be used with VDEV fixed rate configuration */
4593 WMI_RATE_PREAMBLE_OFDM,
4594 WMI_RATE_PREAMBLE_CCK,
4595 WMI_RATE_PREAMBLE_HT,
4596 WMI_RATE_PREAMBLE_VHT,
4597 };
4599 #define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3))
4600 #define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3)
4601 #define ATH10K_HW_RATECODE(rate, nss, preamble) \
4602 (((preamble) << 6) | ((nss) << 4) | (rate))
4604 /* Value to disable fixed rate setting */
4605 #define WMI_FIXED_RATE_NONE (0xff)
4608 u32 rts_threshold;
4609 u32 fragmentation_threshold;
4610 u32 beacon_interval;
4611 u32 listen_interval;
4612 u32 multicast_rate;
4613 u32 mgmt_tx_rate;
4614 u32 slot_time;
4615 u32 preamble;
4616 u32 swba_time;
4617 u32 wmi_vdev_stats_update_period;
4618 u32 wmi_vdev_pwrsave_ageout_time;
4619 u32 wmi_vdev_host_swba_interval;
4620 u32 dtim_period;
4621 u32 wmi_vdev_oc_scheduler_air_time_limit;
4622 u32 wds;
4623 u32 atim_window;
4624 u32 bmiss_count_max;
4625 u32 bmiss_first_bcnt;
4626 u32 bmiss_final_bcnt;
4627 u32 feature_wmm;
4628 u32 chwidth;
4629 u32 chextoffset;
4630 u32 disable_htprotection;
4631 u32 sta_quickkickout;
4632 u32 mgmt_rate;
4633 u32 protection_mode;
4634 u32 fixed_rate;
4635 u32 sgi;
4636 u32 ldpc;
4637 u32 tx_stbc;
4638 u32 rx_stbc;
4639 u32 intra_bss_fwd;
4640 u32 def_keyid;
4641 u32 nss;
4642 u32 bcast_data_rate;
4643 u32 mcast_data_rate;
4644 u32 mcast_indicate;
4645 u32 dhcp_indicate;
4646 u32 unknown_dest_indicate;
4647 u32 ap_keepalive_min_idle_inactive_time_secs;
4648 u32 ap_keepalive_max_idle_inactive_time_secs;
4649 u32 ap_keepalive_max_unresponsive_time_secs;
4650 u32 ap_enable_nawds;
4651 u32 mcast2ucast_set;
4652 u32 enable_rtscts;
4653 u32 txbf;
4654 u32 packet_powersave;
4655 u32 drop_unencry;
4656 u32 tx_encap_type;
4657 u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
4658 u32 rc_num_retries;
4659 u32 cabq_maxdur;
4660 u32 mfptest_set;
4661 u32 rts_fixed_rate;
4662 u32 vht_sgimask;
4663 u32 vht80_ratemask;
4664 u32 early_rx_adjust_enable;
4665 u32 early_rx_tgt_bmiss_num;
4666 u32 early_rx_bmiss_sample_cycle;
4667 u32 early_rx_slop_step;
4668 u32 early_rx_init_slop;
4669 u32 early_rx_adjust_pause;
4670 u32 proxy_sta;
4671 u32 meru_vc;
4672 u32 rx_decap_type;
4673 u32 bw_nss_ratemask;
4674 u32 set_tsf;
4675 };
4677 #define WMI_VDEV_PARAM_UNSUPPORTED 0
4679 /* the definition of different VDEV parameters */
4681 /* RTS Threshold */
4683 /* Fragmentation threshold */
4684 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
4685 /* beacon interval in TUs */
4686 WMI_VDEV_PARAM_BEACON_INTERVAL,
4687 /* Listen interval in TUs */
4688 WMI_VDEV_PARAM_LISTEN_INTERVAL,
4689 /* muticast rate in Mbps */
4690 WMI_VDEV_PARAM_MULTICAST_RATE,
4691 /* management frame rate in Mbps */
4692 WMI_VDEV_PARAM_MGMT_TX_RATE,
4693 /* slot time (long vs short) */
4694 WMI_VDEV_PARAM_SLOT_TIME,
4695 /* preamble (long vs short) */
4696 WMI_VDEV_PARAM_PREAMBLE,
4697 /* SWBA time (time before tbtt in msec) */
4698 WMI_VDEV_PARAM_SWBA_TIME,
4699 /* time period for updating VDEV stats */
4700 WMI_VDEV_STATS_UPDATE_PERIOD,
4701 /* age out time in msec for frames queued for station in power save */
4702 WMI_VDEV_PWRSAVE_AGEOUT_TIME,
4703 /*
4704 * Host SWBA interval (time in msec before tbtt for SWBA event
4705 * generation).
4706 */
4707 WMI_VDEV_HOST_SWBA_INTERVAL,
4708 /* DTIM period (specified in units of num beacon intervals) */
4709 WMI_VDEV_PARAM_DTIM_PERIOD,
4710 /*
4711 * scheduler air time limit for this VDEV. used by off chan
4712 * scheduler.
4713 */
4714 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
4715 /* enable/dsiable WDS for this VDEV */
4716 WMI_VDEV_PARAM_WDS,
4717 /* ATIM Window */
4718 WMI_VDEV_PARAM_ATIM_WINDOW,
4719 /* BMISS max */
4720 WMI_VDEV_PARAM_BMISS_COUNT_MAX,
4721 /* BMISS first time */
4722 WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
4723 /* BMISS final time */
4724 WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
4725 /* WMM enables/disabled */
4726 WMI_VDEV_PARAM_FEATURE_WMM,
4727 /* Channel width */
4728 WMI_VDEV_PARAM_CHWIDTH,
4729 /* Channel Offset */
4730 WMI_VDEV_PARAM_CHEXTOFFSET,
4731 /* Disable HT Protection */
4732 WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
4733 /* Quick STA Kickout */
4734 WMI_VDEV_PARAM_STA_QUICKKICKOUT,
4735 /* Rate to be used with Management frames */
4736 WMI_VDEV_PARAM_MGMT_RATE,
4737 /* Protection Mode */
4738 WMI_VDEV_PARAM_PROTECTION_MODE,
4739 /* Fixed rate setting */
4740 WMI_VDEV_PARAM_FIXED_RATE,
4741 /* Short GI Enable/Disable */
4742 WMI_VDEV_PARAM_SGI,
4743 /* Enable LDPC */
4744 WMI_VDEV_PARAM_LDPC,
4745 /* Enable Tx STBC */
4746 WMI_VDEV_PARAM_TX_STBC,
4747 /* Enable Rx STBC */
4748 WMI_VDEV_PARAM_RX_STBC,
4749 /* Intra BSS forwarding */
4750 WMI_VDEV_PARAM_INTRA_BSS_FWD,
4751 /* Setting Default xmit key for Vdev */
4752 WMI_VDEV_PARAM_DEF_KEYID,
4753 /* NSS width */
4754 WMI_VDEV_PARAM_NSS,
4755 /* Set the custom rate for the broadcast data frames */
4756 WMI_VDEV_PARAM_BCAST_DATA_RATE,
4757 /* Set the custom rate (rate-code) for multicast data frames */
4758 WMI_VDEV_PARAM_MCAST_DATA_RATE,
4759 /* Tx multicast packet indicate Enable/Disable */
4760 WMI_VDEV_PARAM_MCAST_INDICATE,
4761 /* Tx DHCP packet indicate Enable/Disable */
4762 WMI_VDEV_PARAM_DHCP_INDICATE,
4763 /* Enable host inspection of Tx unicast packet to unknown destination */
4764 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
4766 /* The minimum amount of time AP begins to consider STA inactive */
4767 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
4769 /*
4770 * An associated STA is considered inactive when there is no recent
4771 * TX/RX activity and no downlink frames are buffered for it. Once a
4772 * STA exceeds the maximum idle inactive time, the AP will send an
4773 * 802.11 data-null as a keep alive to verify the STA is still
4774 * associated. If the STA does ACK the data-null, or if the data-null
4775 * is buffered and the STA does not retrieve it, the STA will be
4776 * considered unresponsive
4777 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
4778 */
4779 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
4781 /*
4782 * An associated STA is considered unresponsive if there is no recent
4783 * TX/RX activity and downlink frames are buffered for it. Once a STA
4784 * exceeds the maximum unresponsive time, the AP will send a
4785 * WMI_STA_KICKOUT event to the host so the STA can be deleted. */
4786 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
4788 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
4789 WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
4790 /* Enable/Disable RTS-CTS */
4791 WMI_VDEV_PARAM_ENABLE_RTSCTS,
4792 /* Enable TXBFee/er */
4793 WMI_VDEV_PARAM_TXBF,
4795 /* Set packet power save */
4796 WMI_VDEV_PARAM_PACKET_POWERSAVE,
4798 /*
4799 * Drops un-encrypted packets if eceived in an encrypted connection
4800 * otherwise forwards to host.
4801 */
4802 WMI_VDEV_PARAM_DROP_UNENCRY,
4804 /*
4805 * Set the encapsulation type for frames.
4806 */
4807 WMI_VDEV_PARAM_TX_ENCAP_TYPE,
4808 };
4810 /* the definition of different VDEV parameters */
4812 /* RTS Threshold */
4814 /* Fragmentation threshold */
4815 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
4816 /* beacon interval in TUs */
4817 WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
4818 /* Listen interval in TUs */
4819 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
4820 /* muticast rate in Mbps */
4821 WMI_10X_VDEV_PARAM_MULTICAST_RATE,
4822 /* management frame rate in Mbps */
4823 WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
4824 /* slot time (long vs short) */
4825 WMI_10X_VDEV_PARAM_SLOT_TIME,
4826 /* preamble (long vs short) */
4827 WMI_10X_VDEV_PARAM_PREAMBLE,
4828 /* SWBA time (time before tbtt in msec) */
4829 WMI_10X_VDEV_PARAM_SWBA_TIME,
4830 /* time period for updating VDEV stats */
4831 WMI_10X_VDEV_STATS_UPDATE_PERIOD,
4832 /* age out time in msec for frames queued for station in power save */
4833 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
4834 /*
4835 * Host SWBA interval (time in msec before tbtt for SWBA event
4836 * generation).
4837 */
4838 WMI_10X_VDEV_HOST_SWBA_INTERVAL,
4839 /* DTIM period (specified in units of num beacon intervals) */
4840 WMI_10X_VDEV_PARAM_DTIM_PERIOD,
4841 /*
4842 * scheduler air time limit for this VDEV. used by off chan
4843 * scheduler.
4844 */
4845 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
4846 /* enable/dsiable WDS for this VDEV */
4847 WMI_10X_VDEV_PARAM_WDS,
4848 /* ATIM Window */
4849 WMI_10X_VDEV_PARAM_ATIM_WINDOW,
4850 /* BMISS max */
4851 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
4852 /* WMM enables/disabled */
4853 WMI_10X_VDEV_PARAM_FEATURE_WMM,
4854 /* Channel width */
4855 WMI_10X_VDEV_PARAM_CHWIDTH,
4856 /* Channel Offset */
4857 WMI_10X_VDEV_PARAM_CHEXTOFFSET,
4858 /* Disable HT Protection */
4859 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
4860 /* Quick STA Kickout */
4861 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
4862 /* Rate to be used with Management frames */
4863 WMI_10X_VDEV_PARAM_MGMT_RATE,
4864 /* Protection Mode */
4865 WMI_10X_VDEV_PARAM_PROTECTION_MODE,
4866 /* Fixed rate setting */
4867 WMI_10X_VDEV_PARAM_FIXED_RATE,
4868 /* Short GI Enable/Disable */
4869 WMI_10X_VDEV_PARAM_SGI,
4870 /* Enable LDPC */
4871 WMI_10X_VDEV_PARAM_LDPC,
4872 /* Enable Tx STBC */
4873 WMI_10X_VDEV_PARAM_TX_STBC,
4874 /* Enable Rx STBC */
4875 WMI_10X_VDEV_PARAM_RX_STBC,
4876 /* Intra BSS forwarding */
4877 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
4878 /* Setting Default xmit key for Vdev */
4879 WMI_10X_VDEV_PARAM_DEF_KEYID,
4880 /* NSS width */
4881 WMI_10X_VDEV_PARAM_NSS,
4882 /* Set the custom rate for the broadcast data frames */
4883 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
4884 /* Set the custom rate (rate-code) for multicast data frames */
4885 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
4886 /* Tx multicast packet indicate Enable/Disable */
4887 WMI_10X_VDEV_PARAM_MCAST_INDICATE,
4888 /* Tx DHCP packet indicate Enable/Disable */
4889 WMI_10X_VDEV_PARAM_DHCP_INDICATE,
4890 /* Enable host inspection of Tx unicast packet to unknown destination */
4891 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
4893 /* The minimum amount of time AP begins to consider STA inactive */
4894 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
4896 /*
4897 * An associated STA is considered inactive when there is no recent
4898 * TX/RX activity and no downlink frames are buffered for it. Once a
4899 * STA exceeds the maximum idle inactive time, the AP will send an
4900 * 802.11 data-null as a keep alive to verify the STA is still
4901 * associated. If the STA does ACK the data-null, or if the data-null
4902 * is buffered and the STA does not retrieve it, the STA will be
4903 * considered unresponsive
4904 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
4905 */
4906 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
4908 /*
4909 * An associated STA is considered unresponsive if there is no recent
4910 * TX/RX activity and downlink frames are buffered for it. Once a STA
4911 * exceeds the maximum unresponsive time, the AP will send a
4912 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted. */
4913 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
4915 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
4916 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
4918 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
4919 /* Enable/Disable RTS-CTS */
4920 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
4922 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
4924 /* following are available as of firmware 10.2 */
4925 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
4926 WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
4927 WMI_10X_VDEV_PARAM_MFPTEST_SET,
4928 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
4929 WMI_10X_VDEV_PARAM_VHT_SGIMASK,
4930 WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
4931 WMI_10X_VDEV_PARAM_TSF_INCREMENT,
4932 };
4936 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
4937 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
4938 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
4939 WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
4940 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
4941 WMI_10_4_VDEV_PARAM_SLOT_TIME,
4942 WMI_10_4_VDEV_PARAM_PREAMBLE,
4943 WMI_10_4_VDEV_PARAM_SWBA_TIME,
4944 WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
4945 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
4946 WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
4947 WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
4948 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
4949 WMI_10_4_VDEV_PARAM_WDS,
4950 WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
4951 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
4952 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
4953 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
4954 WMI_10_4_VDEV_PARAM_FEATURE_WMM,
4955 WMI_10_4_VDEV_PARAM_CHWIDTH,
4956 WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
4957 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
4958 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
4959 WMI_10_4_VDEV_PARAM_MGMT_RATE,
4960 WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
4961 WMI_10_4_VDEV_PARAM_FIXED_RATE,
4962 WMI_10_4_VDEV_PARAM_SGI,
4963 WMI_10_4_VDEV_PARAM_LDPC,
4964 WMI_10_4_VDEV_PARAM_TX_STBC,
4965 WMI_10_4_VDEV_PARAM_RX_STBC,
4966 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
4967 WMI_10_4_VDEV_PARAM_DEF_KEYID,
4968 WMI_10_4_VDEV_PARAM_NSS,
4969 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
4970 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
4971 WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
4972 WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
4973 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
4974 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
4975 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
4976 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
4977 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
4978 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
4979 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
4980 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
4981 WMI_10_4_VDEV_PARAM_TXBF,
4982 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
4983 WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
4984 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
4985 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
4986 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
4987 WMI_10_4_VDEV_PARAM_MFPTEST_SET,
4988 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
4989 WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
4990 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
4991 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
4992 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
4993 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
4994 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
4995 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
4996 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
4997 WMI_10_4_VDEV_PARAM_PROXY_STA,
4998 WMI_10_4_VDEV_PARAM_MERU_VC,
4999 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
5000 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
5001 WMI_10_4_VDEV_PARAM_SENSOR_AP,
5002 WMI_10_4_VDEV_PARAM_BEACON_RATE,
5003 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
5004 WMI_10_4_VDEV_PARAM_STA_KICKOUT,
5005 WMI_10_4_VDEV_PARAM_CAPABILITIES,
5006 WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
5007 };
5009 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
5010 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
5011 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
5012 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
5014 #define WMI_TXBF_STS_CAP_OFFSET_LSB 4
5015 #define WMI_TXBF_STS_CAP_OFFSET_MASK 0xf0
5016 #define WMI_BF_SOUND_DIM_OFFSET_LSB 8
5017 #define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00
5019 /* slot time long */
5020 #define WMI_VDEV_SLOT_TIME_LONG 0x1
5021 /* slot time short */
5022 #define WMI_VDEV_SLOT_TIME_SHORT 0x2
5023 /* preablbe long */
5024 #define WMI_VDEV_PREAMBLE_LONG 0x1
5025 /* preablbe short */
5026 #define WMI_VDEV_PREAMBLE_SHORT 0x2
5030 WMI_VDEV_RESP_RESTART_EVENT,
5031 };
5034 __le32 vdev_id;
5035 __le32 req_id;
5037 __le32 status;
5041 /* unique id identifying the VDEV, generated by the caller */
5042 __le32 vdev_id;
5046 /* unique id identifying the VDEV, generated by the caller */
5047 __le32 vdev_id;
5051 /* unique id identifying the VDEV, generated by the caller */
5052 __le32 vdev_id;
5055 /*
5056 * common structure used for simple events
5057 * (stopped, resume_req, standby response)
5058 */
5060 /* unique id identifying the VDEV, generated by the caller */
5061 __le32 vdev_id;
5064 /* VDEV start response status codes */
5065 /* VDEV succesfully started */
5066 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0
5068 /* requested VDEV not found */
5069 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1
5071 /* unsupported VDEV combination */
5072 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2
5074 /* TODO: please add more comments if you have in-depth information */
5076 __le32 vdev_id;
5078 /* number of fft samples to send (0 for infinite) */
5079 __le32 scan_count;
5080 __le32 scan_period;
5081 __le32 scan_priority;
5083 /* number of bins in the FFT: 2^(fft_size - bin_scale) */
5084 __le32 scan_fft_size;
5085 __le32 scan_gc_ena;
5086 __le32 scan_restart_ena;
5087 __le32 scan_noise_floor_ref;
5088 __le32 scan_init_delay;
5089 __le32 scan_nb_tone_thr;
5090 __le32 scan_str_bin_thr;
5091 __le32 scan_wb_rpt_mode;
5092 __le32 scan_rssi_rpt_mode;
5093 __le32 scan_rssi_thr;
5094 __le32 scan_pwr_format;
5096 /* rpt_mode: Format of FFT report to software for spectral scan
5097 * triggered FFTs:
5098 * 0: No FFT report (only spectral scan summary report)
5099 * 1: 2-dword summary of metrics for each completed FFT + spectral
5100 * scan summary report
5101 * 2: 2-dword summary of metrics for each completed FFT +
5102 * 1x- oversampled bins(in-band) per FFT + spectral scan summary
5103 * report
5104 * 3: 2-dword summary of metrics for each completed FFT +
5105 * 2x- oversampled bins (all) per FFT + spectral scan summary
5106 */
5107 __le32 scan_rpt_mode;
5108 __le32 scan_bin_scale;
5109 __le32 scan_dbm_adj;
5110 __le32 scan_chn_mask;
5114 u32 vdev_id;
5115 u32 scan_count;
5116 u32 scan_period;
5117 u32 scan_priority;
5118 u32 scan_fft_size;
5119 u32 scan_gc_ena;
5120 u32 scan_restart_ena;
5121 u32 scan_noise_floor_ref;
5122 u32 scan_init_delay;
5123 u32 scan_nb_tone_thr;
5124 u32 scan_str_bin_thr;
5125 u32 scan_wb_rpt_mode;
5126 u32 scan_rssi_rpt_mode;
5127 u32 scan_rssi_thr;
5128 u32 scan_pwr_format;
5129 u32 scan_rpt_mode;
5130 u32 scan_bin_scale;
5131 u32 scan_dbm_adj;
5132 u32 scan_chn_mask;
5133 };
5135 #define WMI_SPECTRAL_ENABLE_DEFAULT 0
5136 #define WMI_SPECTRAL_COUNT_DEFAULT 0
5137 #define WMI_SPECTRAL_PERIOD_DEFAULT 35
5138 #define WMI_SPECTRAL_PRIORITY_DEFAULT 1
5139 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7
5140 #define WMI_SPECTRAL_GC_ENA_DEFAULT 1
5141 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0
5142 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96
5143 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80
5144 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12
5145 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8
5146 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0
5147 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0
5148 #define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0
5149 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0
5150 #define WMI_SPECTRAL_RPT_MODE_DEFAULT 2
5151 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1
5152 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1
5153 #define WMI_SPECTRAL_CHN_MASK_DEFAULT 1
5156 __le32 vdev_id;
5157 __le32 trigger_cmd;
5158 __le32 enable_cmd;
5161 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1
5162 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2
5163 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1
5164 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2
5166 /* Beacon processing related command and event structures */
5168 __le32 vdev_id;
5169 __le32 tx_rate;
5170 __le32 tx_power;
5171 __le32 bcn_len;
5180 u32 vdev_id;
5181 u32 tx_rate;
5182 u32 tx_power;
5183 u32 bcn_len;
5185 };
5190 };
5192 /* TODO: It is unclear why "no antenna" works while any other seemingly valid
5193 * chainmask yields no beacons on the air at all.
5194 */
5195 #define WMI_BCN_TX_REF_DEF_ANTENNA 0
5198 __le32 vdev_id;
5199 __le32 data_len;
5200 /* physical address of the frame - dma pointer */
5201 __le32 data_ptr;
5202 /* id for host to track */
5203 __le32 msdu_id;
5204 /* frame ctrl to setup PPDU desc */
5205 __le32 frame_control;
5206 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5207 __le32 flags;
5208 /* introduced in 10.2 */
5209 __le32 antenna_mask;
5212 /* Beacon filter */
5220 /* Filter ID */
5221 __le32 bcn_filter_id;
5222 /* Filter type - wmi_bcn_filter */
5223 __le32 bcn_filter;
5224 /* Buffer len */
5225 __le32 bcn_filter_len;
5226 /* Filter info (threshold, BSSID, RSSI) */
5230 /* Capabilities and IEs to be passed to firmware */
5232 /* Capabilities */
5233 __le32 caps;
5234 /* ERP info */
5235 __le32 erp;
5236 /* Advanced capabilities */
5237 /* HT capabilities */
5238 /* HT Info */
5239 /* ibss_dfs */
5240 /* wpa Info */
5241 /* rsn Info */
5242 /* rrm info */
5243 /* ath_ext */
5244 /* app IE */
5248 /* unique id identifying the VDEV, generated by the caller */
5249 __le32 vdev_id;
5250 /* TIM IE offset from the beginning of the template. */
5251 __le32 tim_ie_offset;
5252 /* beacon probe capabilities and IEs */
5254 /* beacon buffer length */
5255 __le32 buf_len;
5256 /* variable length data */
5261 /* unique id identifying the VDEV, generated by the caller */
5262 __le32 vdev_id;
5263 /* beacon probe capabilities and IEs */
5265 /* beacon buffer length */
5266 __le32 buf_len;
5267 /* Variable length data */
5272 /* enable power save for the given STA VDEV */
5274 /* disable power save for a given STA VDEV */
5276 };
5279 /* unique id identifying the VDEV, generated by the caller */
5280 __le32 vdev_id;
5282 /*
5283 * Power save mode
5284 * (see enum wmi_sta_ps_mode)
5285 */
5286 __le32 sta_ps_mode;
5292 };
5295 __le32 vdev_id;
5296 __le32 csa_offload_enable;
5300 __le32 vdev_id;
5304 /*
5305 * This parameter controls the policy for retrieving frames from AP while the
5306 * STA is in sleep state.
5307 *
5308 * Only takes affect if the sta_ps_mode is enabled
5309 */
5311 /*
5312 * Wake up when ever there is an RX activity on the VDEV. In this mode
5313 * the Power save SM(state machine) will come out of sleep by either
5314 * sending null frame (or) a data frame (with PS==0) in response to TIM
5315 * bit set in the received beacon frame from AP.
5316 */
5319 /*
5320 * Here the power save state machine will not wakeup in response to TIM
5321 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5322 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all
5323 * access categories are delivery-enabled, the station will send a
5324 * UAPSD trigger frame, otherwise it will send a PS-Poll.
5325 */
5327 };
5329 /*
5330 * Number of tx frames/beacon that cause the power save SM to wake up.
5331 *
5332 * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5333 * meaning, It will cause the SM to never wake up. This is useful if you want
5334 * to keep the system to sleep all the time for some kind of test mode . host
5335 * can change this parameter any time. It will affect at the next tx frame.
5336 */
5341 /*
5342 * Values greater than one indicate that many TX attempts per beacon
5343 * interval before the STA will wake up
5344 */
5345 };
5347 /*
5348 * The maximum number of PS-Poll frames the FW will send in response to
5349 * traffic advertised in TIM before waking up (by sending a null frame with PS
5350 * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5351 * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5352 * parameter is used when the RX wake policy is
5353 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5354 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5355 */
5358 /*
5359 * Values greater than 0 indicate the maximum numer of PS-Poll frames
5360 * FW will send before waking up.
5361 */
5363 /* When u-APSD is enabled the firmware will be very reluctant to exit
5364 * STA PS. This could result in very poor Rx performance with STA doing
5365 * PS-Poll for each and every buffered frame. This value is a bit
5366 * arbitrary.
5367 */
5369 };
5371 /*
5372 * This will include the delivery and trigger enabled state for every AC.
5373 * This is the negotiated state with AP. The host MLME needs to set this based
5374 * on AP capability and the state Set in the association request by the
5375 * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5376 */
5377 #define WMI_UAPSD_AC_TYPE_DELI 0
5378 #define WMI_UAPSD_AC_TYPE_TRIG 1
5380 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5381 ((type == WMI_UAPSD_AC_TYPE_DELI) ? (1 << (ac << 1)) : (1 << ((ac << 1) + 1)))
5392 };
5394 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5397 __le32 wmm_ac;
5398 __le32 user_priority;
5399 __le32 service_interval;
5400 __le32 suspend_interval;
5401 __le32 delay_interval;
5402 };
5405 __le32 vdev_id;
5407 __le32 num_ac;
5408 };
5411 u32 wmm_ac;
5412 u32 user_priority;
5413 u32 service_interval;
5414 u32 suspend_interval;
5415 u32 delay_interval;
5416 };
5419 /*
5420 * Controls how frames are retrievd from AP while STA is sleeping
5421 *
5422 * (see enum wmi_sta_ps_param_rx_wake_policy)
5423 */
5426 /*
5427 * The STA will go active after this many TX
5428 *
5429 * (see enum wmi_sta_ps_param_tx_wake_threshold)
5430 */
5433 /*
5434 * Number of PS-Poll to send before STA wakes up
5435 *
5436 * (see enum wmi_sta_ps_param_pspoll_count)
5437 *
5438 */
5441 /*
5442 * TX/RX inactivity time in msec before going to sleep.
5443 *
5444 * The power save SM will monitor tx/rx activity on the VDEV, if no
5445 * activity for the specified msec of the parameter the Power save
5446 * SM will go to sleep.
5447 */
5450 /*
5451 * Set uapsd configuration.
5452 *
5453 * (see enum wmi_sta_ps_param_uapsd)
5454 */
5456 };
5459 __le32 vdev_id;
5461 __le32 param_value;
5464 /* No MIMO power save */
5465 #define WMI_STA_MIMO_PS_MODE_DISABLE
5466 /* mimo powersave mode static*/
5467 #define WMI_STA_MIMO_PS_MODE_STATIC
5468 /* mimo powersave mode dynamic */
5469 #define WMI_STA_MIMO_PS_MODE_DYNAMIC
5472 /* unique id identifying the VDEV, generated by the caller */
5473 __le32 vdev_id;
5474 /* mimo powersave mode as defined above */
5475 __le32 mimo_pwrsave_mode;
5478 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */
5488 };
5490 /* U-APSD maximum service period of peer station */
5496 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
5497 };
5499 /*
5500 * AP power save parameter
5501 * Set a power save specific parameter for a peer station
5502 */
5504 /* Set uapsd configuration for a given peer.
5505 *
5506 * Include the delivery and trigger enabled state for every AC.
5507 * The host MLME needs to set this based on AP capability and stations
5508 * request Set in the association request received from the station.
5509 *
5510 * Lower 8 bits of the value specify the UAPSD configuration.
5511 *
5512 * (see enum wmi_ap_ps_param_uapsd)
5513 * The default value is 0.
5514 */
5517 /*
5518 * Set the service period for a UAPSD capable station
5519 *
5520 * The service period from wme ie in the (re)assoc request frame.
5521 *
5522 * (see enum wmi_ap_ps_peer_param_max_sp)
5523 */
5526 /* Time in seconds for aging out buffered frames for STA in PS */
5528 };
5531 /* unique id identifying the VDEV, generated by the caller */
5532 __le32 vdev_id;
5534 /* peer MAC address */
5537 /* AP powersave param (see enum wmi_ap_ps_peer_param) */
5538 __le32 param_id;
5540 /* AP powersave param value */
5541 __le32 param_value;
5544 /* 128 clients = 4 words */
5545 #define WMI_TIM_BITMAP_ARRAY_SIZE 4
5548 __le32 tim_len;
5549 __le32 tim_mcast;
5551 __le32 tim_changed;
5552 __le32 tim_num_ps_pending;
5556 __le32 tim_len;
5557 __le32 tim_mcast;
5559 __le32 tim_changed;
5560 __le32 tim_num_ps_pending;
5563 /* Maximum number of NOA Descriptors supported */
5564 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4
5565 #define WMI_P2P_OPPPS_ENABLE_BIT BIT(0)
5566 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1
5567 #define WMI_P2P_NOA_CHANGED_BIT BIT(0)
5570 /* Bit 0 - Flag to indicate an update in NOA schedule
5571 Bits 7-1 - Reserved */
5572 u8 changed;
5573 /* NOA index */
5574 u8 index;
5575 /* Bit 0 - Opp PS state of the AP
5576 Bits 1-7 - Ctwindow in TUs */
5577 u8 ctwindow_oppps;
5578 /* Number of NOA descriptors */
5579 u8 num_descriptors;
5590 __le32 vdev_map;
5596 /* The 10.2.4 FW doesn't have p2p NOA info */
5600 __le32 vdev_map;
5604 /* 16 words = 512 client + 1 word = for guard */
5605 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
5608 __le32 tim_len;
5609 __le32 tim_mcast;
5611 __le32 tim_changed;
5612 __le32 tim_num_ps_pending;
5615 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
5618 /* Bit 0 - Flag to indicate an update in NOA schedule
5619 * Bits 7-1 - Reserved
5620 */
5621 u8 changed;
5622 /* NOA index */
5623 u8 index;
5624 /* Bit 0 - Opp PS state of the AP
5625 * Bits 1-7 - Ctwindow in TUs
5626 */
5627 u8 ctwindow_oppps;
5628 /* Number of NOA descriptors */
5629 u8 num_descriptors;
5631 struct wmi_p2p_noa_descriptor
5641 __le32 vdev_map;
5645 #define WMI_MAX_AP_VDEV 16
5648 __le32 vdev_map;
5653 __le32 vdev_id;
5661 };
5664 __le32 vdev_id;
5669 __le32 vdev_id;
5671 __le32 peer_tid_bitmap;
5675 /*
5676 * rate mode . 0: disable fixed rate (auto rate)
5677 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps
5678 * 2: ht20 11n rate specified as mcs index
5679 * 3: ht40 11n rate specified as mcs index
5680 */
5681 __le32 rate_mode;
5682 /*
5683 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
5684 * and series 3 is stored at byte 3 (MSB)
5685 */
5686 __le32 rate_series;
5687 /*
5688 * 4 retry counts for 4 rate series. retry count for rate 0 is stored
5689 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
5690 * (MSB)
5691 */
5692 __le32 rate_retries;
5696 /* unique id identifying the VDEV, generated by the caller */
5697 __le32 vdev_id;
5698 /* peer MAC address */
5700 /* fixed rate */
5704 #define WMI_MGMT_TID 17
5707 /* unique id identifying the VDEV, generated by the caller */
5708 __le32 vdev_id;
5709 /* peer MAC address */
5714 /* unique id identifying the VDEV, generated by the caller */
5715 __le32 vdev_id;
5716 /* peer MAC address */
5718 /* Tid number */
5719 __le32 tid;
5720 /* Buffer/Window size*/
5721 __le32 buffersize;
5725 /* unique id identifying the VDEV, generated by the caller */
5726 __le32 vdev_id;
5727 /* peer MAC address */
5729 /* Tid number */
5730 __le32 tid;
5731 /* Is Initiator */
5732 __le32 initiator;
5733 /* Reason code */
5734 __le32 reasoncode;
5738 /* unique id identifying the vdev, generated by the caller */
5739 __le32 vdev_id;
5740 /* peer mac address */
5742 /* Tid number */
5743 __le32 tid;
5744 /* status code */
5745 __le32 statuscode;
5749 /* unique id identifying the vdev, generated by the caller */
5750 __le32 vdev_id;
5751 /* peer mac address */
5753 /* Tid number */
5754 __le32 tid;
5761 };
5767 };
5777 };
5780 __le32 vdev_id;
5782 __le32 param_id;
5783 __le32 param_value;
5786 #define MAX_SUPPORTED_RATES 128
5789 /* total number of rates */
5790 __le32 num_rates;
5791 /*
5792 * rates (each 8bit value) packed into a 32 bit word.
5793 * the rates are filled from least significant byte to most
5794 * significant byte.
5795 */
5802 };
5804 /*
5805 * NOTE: It would bea good idea to represent the Tx MCS
5806 * info in one word and Rx in another word. This is split
5807 * into multiple words for convenience
5808 */
5817 u32 rx_max_rate;
5818 u32 rx_mcs_set;
5819 u32 tx_max_rate;
5820 u32 tx_mcs_set;
5821 };
5824 /* peer MAC address */
5826 /* legacy rate set */
5828 /* ht rate set */
5833 /* unique id identifying the VDEV, generated by the caller */
5834 __le32 vdev_id;
5835 /* peer MAC address */
5837 __le32 callback_enable;
5841 u32 auth;
5842 u32 qos;
5843 u32 need_ptk_4_way;
5844 u32 need_gtk_2_way;
5845 u32 apsd;
5846 u32 ht;
5847 u32 bw40;
5848 u32 stbc;
5849 u32 ldbc;
5850 u32 dyn_mimops;
5851 u32 static_mimops;
5852 u32 spatial_mux;
5853 u32 vht;
5854 u32 bw80;
5855 u32 vht_2g;
5856 u32 pmf;
5857 };
5876 };
5893 };
5912 };
5914 /*
5915 * Peer rate capabilities.
5916 *
5917 * This is of interest to the ratecontrol
5918 * module which resides in the firmware. The bit definitions are
5919 * consistent with that defined in if_athrate.c.
5920 */
5921 #define WMI_RC_DS_FLAG 0x01
5922 #define WMI_RC_CW40_FLAG 0x02
5923 #define WMI_RC_SGI_FLAG 0x04
5924 #define WMI_RC_HT_FLAG 0x08
5925 #define WMI_RC_RTSCTS_FLAG 0x10
5926 #define WMI_RC_TX_STBC_FLAG 0x20
5927 #define WMI_RC_RX_STBC_FLAG 0xC0
5928 #define WMI_RC_RX_STBC_FLAG_S 6
5929 #define WMI_RC_WEP_TKIP_FLAG 0x100
5930 #define WMI_RC_TS_FLAG 0x200
5931 #define WMI_RC_UAPSD_FLAG 0x400
5933 /* Maximum listen interval supported by hw in units of beacon interval */
5934 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5
5938 __le32 vdev_id;
5941 __le32 peer_flags;
5943 __le32 peer_listen_intval;
5944 __le32 peer_ht_caps;
5945 __le32 peer_max_mpdu;
5947 __le32 peer_rate_caps;
5951 __le32 peer_vht_caps;
5952 __le32 peer_phymode;
5954 };
5959 /* HT Operation Element of the peer. Five bytes packed in 2
5960 * INT32 array and filled from lsb to msb. */
5968 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
5969 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
5970 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
5971 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
5980 __le32 peer_bw_rxnss_override;
5985 u32 vdev_id;
5987 u16 peer_aid;
5989 u16 peer_caps;
5990 u32 peer_listen_intval;
5991 u32 peer_ht_caps;
5992 u32 peer_max_mpdu;
5997 u32 peer_num_spatial_streams;
5998 u32 peer_vht_caps;
6001 };
6004 /* peer MAC address */
6006 /* wds MAC addr */
6011 /* wds MAC addr */
6016 /* peer MAC address */
6020 /*
6021 * Channel info WMI event
6022 */
6024 __le32 err_code;
6025 __le32 freq;
6026 __le32 cmd_flags;
6027 __le32 noise_floor;
6028 __le32 rx_clear_count;
6029 __le32 cycle_count;
6033 __le32 err_code;
6034 __le32 freq;
6035 __le32 cmd_flags;
6036 __le32 noise_floor;
6037 __le32 rx_clear_count;
6038 __le32 cycle_count;
6039 __le32 chan_tx_pwr_range;
6040 __le32 chan_tx_pwr_tp;
6041 __le32 rx_frame_count;
6048 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
6049 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
6051 /* Beacon filter wmi command info */
6052 #define BCN_FLT_MAX_SUPPORTED_IES 256
6053 #define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32)
6056 __le32 vdev_id;
6057 __le32 bss_bcnsdropped;
6058 __le32 bss_bcnsdelivered;
6062 __le32 bcns_dropped;
6063 __le32 bcns_delivered;
6064 __le32 activefilters;
6069 u32 vdev_id;
6076 };
6078 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
6080 /* Firmware crashes if keepalive interval exceeds this limit */
6081 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
6083 /* note: ip4 addresses are in network byte order, i.e. big endian */
6085 __be32 src_ip4_addr;
6086 __be32 dest_ip4_addr;
6091 __le32 vdev_id;
6092 __le32 enabled;
6099 u32 vdev_id;
6100 u32 enabled;
6101 u32 method;
6102 u32 interval;
6103 __be32 src_ip4_addr;
6104 __be32 dest_ip4_addr;
6106 };
6110 WMI_FORCE_FW_HANG_NO_DETECT,
6111 WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6112 WMI_FORCE_FW_HANG_EMPTY_POINT,
6113 WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6114 WMI_FORCE_FW_HANG_INFINITE_LOOP,
6115 };
6117 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6120 __le32 type;
6121 __le32 delay_ms;
6129 };
6131 /* VAP ids to enable dbglog */
6132 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0
6133 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff
6135 /* to enable dbglog in the firmware */
6136 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16
6137 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
6139 /* timestamp resolution */
6140 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17
6141 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000
6143 /* number of queued messages before sending them to the host */
6144 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20
6145 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000
6147 /*
6148 * Log levels to enable. This defines the minimum level to enable, this is
6149 * not a bitmask. See enum ath10k_dbglog_level for the values.
6150 */
6151 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28
6152 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000
6154 /*
6155 * Note: this is a cleaned up version of a struct firmware uses. For
6156 * example, config_valid was hidden inside an array.
6157 */
6159 /* bitmask to hold mod id config*/
6160 __le32 module_enable;
6162 /* see ATH10K_DBGLOG_CFG_ */
6163 __le32 config_enable;
6165 /* mask of module id bits to be changed */
6166 __le32 module_valid;
6168 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6169 __le32 config_valid;
6179 /* keep last */
6180 WMI_ROAM_REASON_MAX,
6181 };
6184 __le32 vdev_id;
6185 __le32 reason;
6188 #define ATH10K_FRAGMT_THRESHOLD_MIN 540
6189 #define ATH10K_FRAGMT_THRESHOLD_MAX 2346
6191 #define WMI_MAX_EVENT 0x1000
6192 /* Maximum number of pending TXed WMI packets */
6193 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6195 /* By default disable power save for IBSS */
6196 #define ATH10K_DEFAULT_ATIM 0
6198 #define WMI_MAX_MEM_REQS 16
6204 __le32 scan_req_id;
6205 __le32 scan_id;
6206 __le32 vdev_id;
6207 };
6210 __le32 channel;
6211 __le32 snr;
6212 __le32 rate;
6213 __le32 phy_mode;
6214 __le32 buf_len;
6217 };
6220 __le32 err_code;
6221 __le32 freq;
6222 __le32 cmd_flags;
6223 __le32 noise_floor;
6224 __le32 rx_clear_count;
6225 __le32 cycle_count;
6226 __le32 chan_tx_pwr_range;
6227 __le32 chan_tx_pwr_tp;
6228 __le32 rx_frame_count;
6229 };
6232 __le32 vdev_id;
6233 __le32 req_id;
6235 __le32 status;
6236 };
6240 };
6243 __le32 vdev_map;
6246 };
6249 u32 tsf_timestamp;
6250 u16 freq1;
6251 u16 freq2;
6252 u8 rssi_combined;
6253 u8 chan_width_mhz;
6254 u8 phy_err_code;
6256 u32 buf_len;
6258 u8 hdr_len;
6259 };
6262 u32 num_phyerrs;
6263 u32 tsf_l32;
6264 u32 tsf_u32;
6265 u32 buf_len;
6267 };
6270 __le32 min_tx_power;
6271 __le32 max_tx_power;
6272 __le32 ht_cap;
6273 __le32 vht_cap;
6274 __le32 sw_ver0;
6275 __le32 sw_ver1;
6276 __le32 fw_build;
6277 __le32 phy_capab;
6278 __le32 num_rf_chains;
6279 __le32 eeprom_rd;
6280 __le32 num_mem_reqs;
6284 };
6287 __le32 sw_version;
6288 __le32 abi_version;
6289 __le32 status;
6291 };
6294 __le32 vdev_id;
6295 __le32 reason;
6296 __le32 rssi;
6297 };
6300 /* temperature value in Celcius degree */
6301 __le32 temperature;
6305 __le32 freq;
6306 __le32 noise_floor;
6307 __le64 cycle_busy;
6308 __le64 cycle_total;
6309 __le64 cycle_tx;
6310 __le64 cycle_rx;
6311 __le64 cycle_rx_bss;
6312 __le32 reserved;
6315 /* WOW structures */
6318 WOW_BETTER_AP_EVENT,
6319 WOW_DEAUTH_RECVD_EVENT,
6320 WOW_MAGIC_PKT_RECVD_EVENT,
6321 WOW_GTK_ERR_EVENT,
6322 WOW_FOURWAY_HSHAKE_EVENT,
6323 WOW_EAPOL_RECVD_EVENT,
6324 WOW_NLO_DETECTED_EVENT,
6325 WOW_DISASSOC_RECVD_EVENT,
6326 WOW_PATTERN_MATCH_EVENT,
6327 WOW_CSA_IE_EVENT,
6328 WOW_PROBE_REQ_WPS_IE_EVENT,
6329 WOW_AUTH_REQ_EVENT,
6330 WOW_ASSOC_REQ_EVENT,
6331 WOW_HTT_EVENT,
6332 WOW_RA_MATCH_EVENT,
6333 WOW_HOST_AUTO_SHUTDOWN_EVENT,
6334 WOW_IOAC_MAGIC_EVENT,
6335 WOW_IOAC_SHORT_EVENT,
6336 WOW_IOAC_EXTEND_EVENT,
6337 WOW_IOAC_TIMER_EVENT,
6338 WOW_DFS_PHYERR_RADAR_EVENT,
6339 WOW_BEACON_EVENT,
6340 WOW_CLIENT_KICKOUT_EVENT,
6341 WOW_EVENT_MAX,
6342 };
6344 #define C2S(x) case x: return #x
6347 {
6376 }
6377 }
6382 WOW_REASON_AP_ASSOC_LOST,
6383 WOW_REASON_LOW_RSSI,
6384 WOW_REASON_DEAUTH_RECVD,
6385 WOW_REASON_DISASSOC_RECVD,
6386 WOW_REASON_GTK_HS_ERR,
6387 WOW_REASON_EAP_REQ,
6388 WOW_REASON_FOURWAY_HS_RECV,
6389 WOW_REASON_TIMER_INTR_RECV,
6390 WOW_REASON_PATTERN_MATCH_FOUND,
6391 WOW_REASON_RECV_MAGIC_PATTERN,
6392 WOW_REASON_P2P_DISC,
6393 WOW_REASON_WLAN_HB,
6394 WOW_REASON_CSA_EVENT,
6395 WOW_REASON_PROBE_REQ_WPS_IE_RECV,
6396 WOW_REASON_AUTH_REQ_RECV,
6397 WOW_REASON_ASSOC_REQ_RECV,
6398 WOW_REASON_HTT_EVENT,
6399 WOW_REASON_RA_MATCH,
6400 WOW_REASON_HOST_AUTO_SHUTDOWN,
6401 WOW_REASON_IOAC_MAGIC_EVENT,
6402 WOW_REASON_IOAC_SHORT_EVENT,
6403 WOW_REASON_IOAC_EXTEND_EVENT,
6404 WOW_REASON_IOAC_TIMER_EVENT,
6405 WOW_REASON_ROAM_HO,
6406 WOW_REASON_DFS_PHYERR_RADADR_EVENT,
6407 WOW_REASON_BEACON_RECV,
6408 WOW_REASON_CLIENT_KICKOUT_EVENT,
6410 };
6413 {
6447 }
6448 }
6450 #undef C2S
6453 u32 vdev_id;
6454 u32 flag;
6456 u32 data_len;
6457 };
6459 #define WOW_MIN_PATTERN_SIZE 1
6460 #define WOW_MAX_PATTERN_SIZE 148
6461 #define WOW_MAX_PKT_OFFSET 128
6464 WMI_TDLS_DISABLE,
6465 WMI_TDLS_ENABLE_PASSIVE,
6466 WMI_TDLS_ENABLE_ACTIVE,
6467 };
6470 WMI_TDLS_PEER_STATE_PEERING,
6471 WMI_TDLS_PEER_STATE_CONNECTED,
6472 WMI_TDLS_PEER_STATE_TEARDOWN,
6473 };
6476 u32 vdev_id;
6479 };
6481 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
6484 u8 peer_uapsd_queues;
6485 u8 peer_max_sp;
6486 u32 buff_sta_support;
6487 u32 off_chan_support;
6488 u32 peer_curr_operclass;
6489 u32 self_curr_operclass;
6490 u32 peer_chan_len;
6491 u32 peer_operclass_len;
6493 u32 is_peer_responder;
6494 u32 pref_offchan_num;
6495 u32 pref_offchan_bw;
6496 };
6499 WMI_TXBF_CONF_UNSUPPORTED,
6500 WMI_TXBF_CONF_BEFORE_ASSOC,
6501 WMI_TXBF_CONF_AFTER_ASSOC,
6502 };
6504 #define WMI_CCA_DETECT_LEVEL_AUTO 0
6505 #define WMI_CCA_DETECT_MARGIN_AUTO 0
6508 __le32 enable;
6509 __le32 cca_detect_level;
6510 __le32 cca_detect_margin;
6514 WMI_HOST_PLATFORM_HIGH_PERF,
6515 WMI_HOST_PLATFORM_LOW_PERF,
6516 };
6520 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
6521 };
6524 __le32 type;
6525 __le32 reserved;
6546 u32 cmd_id);
6584 u64 tsf);