drivers/usb/host/ohci-nxp.c

   1 /*
   2  * driver for NXP USB Host devices
   3  *
   4  * Currently supported OHCI host devices:
   5  * - NXP LPC32xx
   6  *
   7  * Authors: Dmitry Chigirev <source@mvista.com>
   8  *          Vitaly Wool <vitalywool@gmail.com>
   9  *
  10  * register initialization is based on code examples provided by Philips
  11  * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
  12  *
  13  * NOTE: This driver does not have suspend/resume functionality
  14  * This driver is intended for engineering development purposes only
  15  *
  16  * 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
  17  * the terms of the GNU General Public License version 2. This program
  18  * is licensed "as is" without any warranty of any kind, whether express
  19  * or implied.
  20  */
  21 #include <linux/clk.h>
  22 #include <linux/dma-mapping.h>
  23 #include <linux/io.h>
  24 #include <linux/i2c.h>
  25 #include <linux/kernel.h>
  26 #include <linux/module.h>
  27 #include <linux/of.h>
  28 #include <linux/platform_device.h>
  29 #include <linux/usb/isp1301.h>
  30 #include <linux/usb.h>
  31 #include <linux/usb/hcd.h>
  32
  33 #include "ohci.h"
  34
  35
  36 #include <mach/hardware.h>
  37 #include <asm/mach-types.h>
  38 #include <asm/io.h>
  39
  40 #include <mach/platform.h>
  41 #include <mach/irqs.h>
  42
  43 #define USB_CONFIG_BASE         0x31020000
  44 #define PWRMAN_BASE             0x40004000
  45
  46 #define USB_CTRL                IO_ADDRESS(PWRMAN_BASE + 0x64)
  47
  48 /* USB_CTRL bit defines */
  49 #define USB_SLAVE_HCLK_EN       (1 << 24)
  50 #define USB_DEV_NEED_CLK_EN     (1 << 22)
  51 #define USB_HOST_NEED_CLK_EN    (1 << 21)
  52 #define PAD_CONTROL_LAST_DRIVEN (1 << 19)
  53
  54 #define USB_OTG_STAT_CONTROL    IO_ADDRESS(USB_CONFIG_BASE + 0x110)
  55
  56 /* USB_OTG_STAT_CONTROL bit defines */
  57 #define TRANSPARENT_I2C_EN      (1 << 7)
  58 #define HOST_EN                 (1 << 0)
  59
  60 /* On LPC32xx, those are undefined */
  61 #ifndef start_int_set_falling_edge
  62 #define start_int_set_falling_edge(irq)
  63 #define start_int_set_rising_edge(irq)
  64 #define start_int_ack(irq)
  65 #define start_int_mask(irq)
  66 #define start_int_umask(irq)
  67 #endif
  68
  69 #define DRIVER_DESC "OHCI NXP driver"
  70
  71 static const char hcd_name[] = "ohci-nxp";
  72 static struct hc_driver __read_mostly ohci_nxp_hc_driver;
  73
  74 static struct i2c_client *isp1301_i2c_client;
  75
  76 extern int usb_disabled(void);
  77
  78 static struct clk *usb_pll_clk;
  79 static struct clk *usb_dev_clk;
  80 static struct clk *usb_otg_clk;
  81
  82 static void isp1301_configure_lpc32xx(void)
  83 {
  84         /* LPC32XX only supports DAT_SE0 USB mode */
  85         /* This sequence is important */
  86
  87         /* Disable transparent UART mode first */
  88         i2c_smbus_write_byte_data(isp1301_i2c_client,
  89                 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
  90                 MC1_UART_EN);
  91         i2c_smbus_write_byte_data(isp1301_i2c_client,
  92                 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
  93                 ~MC1_SPEED_REG);
  94         i2c_smbus_write_byte_data(isp1301_i2c_client,
  95                                   ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
  96         i2c_smbus_write_byte_data(isp1301_i2c_client,
  97                   (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
  98                   ~0);
  99         i2c_smbus_write_byte_data(isp1301_i2c_client,
 100                 ISP1301_I2C_MODE_CONTROL_2,
 101                 (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
 102         i2c_smbus_write_byte_data(isp1301_i2c_client,
 103                 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
 104         i2c_smbus_write_byte_data(isp1301_i2c_client,
 105                 ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
 106         i2c_smbus_write_byte_data(isp1301_i2c_client,
 107                 ISP1301_I2C_OTG_CONTROL_1,
 108                 (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
 109         i2c_smbus_write_byte_data(isp1301_i2c_client,
 110                 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
 111                 (OTG1_DM_PULLUP | OTG1_DP_PULLUP));
 112         i2c_smbus_write_byte_data(isp1301_i2c_client,
 113                 ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
 114         i2c_smbus_write_byte_data(isp1301_i2c_client,
 115                 ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
 116                 ~0);
 117         i2c_smbus_write_byte_data(isp1301_i2c_client,
 118                 ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
 119
 120         /* Enable usb_need_clk clock after transceiver is initialized */
 121         __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
 122
 123         printk(KERN_INFO "ISP1301 Vendor ID  : 0x%04x\n",
 124               i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
 125         printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
 126               i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
 127         printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
 128               i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
 129 }
 130
 131 static void isp1301_configure(void)
 132 {
 133         isp1301_configure_lpc32xx();
 134 }
 135
 136 static inline void isp1301_vbus_on(void)
 137 {
 138         i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
 139                                   OTG1_VBUS_DRV);
 140 }
 141
 142 static inline void isp1301_vbus_off(void)
 143 {
 144         i2c_smbus_write_byte_data(isp1301_i2c_client,
 145                 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
 146                 OTG1_VBUS_DRV);
 147 }
 148
 149 static void ohci_nxp_start_hc(void)
 150 {
 151         unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
 152         __raw_writel(tmp, USB_OTG_STAT_CONTROL);
 153         isp1301_vbus_on();
 154 }
 155
 156 static void ohci_nxp_stop_hc(void)
 157 {
 158         unsigned long tmp;
 159         isp1301_vbus_off();
 160         tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN;
 161         __raw_writel(tmp, USB_OTG_STAT_CONTROL);
 162 }
 163
 164 static int ohci_hcd_nxp_probe(struct platform_device *pdev)
 165 {
 166         struct usb_hcd *hcd = 0;
 167         const struct hc_driver *driver = &ohci_nxp_hc_driver;
 168         struct resource *res;
 169         int ret = 0, irq;
 170         struct device_node *isp1301_node;
 171
 172         if (pdev->dev.of_node) {
 173                 isp1301_node = of_parse_phandle(pdev->dev.of_node,
 174                                                 "transceiver", 0);
 175         } else {
 176                 isp1301_node = NULL;
 177         }
 178
 179         isp1301_i2c_client = isp1301_get_client(isp1301_node);
 180         if (!isp1301_i2c_client) {
 181                 return -EPROBE_DEFER;
 182         }
 183
 184         ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 185         if (ret)
 186                 goto fail_disable;
 187
 188         dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
 189         if (usb_disabled()) {
 190                 dev_err(&pdev->dev, "USB is disabled\n");
 191                 ret = -ENODEV;
 192                 goto fail_disable;
 193         }
 194
 195         /* Enable AHB slave USB clock, needed for further USB clock control */
 196         __raw_writel(USB_SLAVE_HCLK_EN | PAD_CONTROL_LAST_DRIVEN, USB_CTRL);
 197
 198         /* Enable USB PLL */
 199         usb_pll_clk = devm_clk_get(&pdev->dev, "ck_pll5");
 200         if (IS_ERR(usb_pll_clk)) {
 201                 dev_err(&pdev->dev, "failed to acquire USB PLL\n");
 202                 ret = PTR_ERR(usb_pll_clk);
 203                 goto fail_disable;
 204         }
 205
 206         ret = clk_enable(usb_pll_clk);
 207         if (ret < 0) {
 208                 dev_err(&pdev->dev, "failed to start USB PLL\n");
 209                 goto fail_disable;
 210         }
 211
 212         ret = clk_set_rate(usb_pll_clk, 48000);
 213         if (ret < 0) {
 214                 dev_err(&pdev->dev, "failed to set USB clock rate\n");
 215                 goto fail_rate;
 216         }
 217
 218         /* Enable USB device clock */
 219         usb_dev_clk = devm_clk_get(&pdev->dev, "ck_usbd");
 220         if (IS_ERR(usb_dev_clk)) {
 221                 dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
 222                 ret = PTR_ERR(usb_dev_clk);
 223                 goto fail_rate;
 224         }
 225
 226         ret = clk_enable(usb_dev_clk);
 227         if (ret < 0) {
 228                 dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
 229                 goto fail_rate;
 230         }
 231
 232         /* Enable USB otg clocks */
 233         usb_otg_clk = devm_clk_get(&pdev->dev, "ck_usb_otg");
 234         if (IS_ERR(usb_otg_clk)) {
 235                 dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
 236                 ret = PTR_ERR(usb_otg_clk);
 237                 goto fail_otg;
 238         }
 239
 240         __raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
 241
 242         ret = clk_enable(usb_otg_clk);
 243         if (ret < 0) {
 244                 dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
 245                 goto fail_otg;
 246         }
 247
 248         isp1301_configure();
 249
 250         hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
 251         if (!hcd) {
 252                 dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
 253                 ret = -ENOMEM;
 254                 goto fail_hcd;
 255         }
 256
 257         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 258         hcd->regs = devm_ioremap_resource(&pdev->dev, res);
 259         if (IS_ERR(hcd->regs)) {
 260                 ret = PTR_ERR(hcd->regs);
 261                 goto fail_resource;
 262         }
 263         hcd->rsrc_start = res->start;
 264         hcd->rsrc_len = resource_size(res);
 265
 266         irq = platform_get_irq(pdev, 0);
 267         if (irq < 0) {
 268                 ret = -ENXIO;
 269                 goto fail_resource;
 270         }
 271
 272         ohci_nxp_start_hc();
 273         platform_set_drvdata(pdev, hcd);
 274
 275         dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
 276         ret = usb_add_hcd(hcd, irq, 0);
 277         if (ret == 0) {
 278                 device_wakeup_enable(hcd->self.controller);
 279                 return ret;
 280         }
 281
 282         ohci_nxp_stop_hc();
 283 fail_resource:
 284         usb_put_hcd(hcd);
 285 fail_hcd:
 286         clk_disable(usb_otg_clk);
 287 fail_otg:
 288         clk_disable(usb_dev_clk);
 289 fail_rate:
 290         clk_disable(usb_pll_clk);
 291 fail_disable:
 292         isp1301_i2c_client = NULL;
 293         return ret;
 294 }
 295
 296 static int ohci_hcd_nxp_remove(struct platform_device *pdev)
 297 {
 298         struct usb_hcd *hcd = platform_get_drvdata(pdev);
 299
 300         usb_remove_hcd(hcd);
 301         ohci_nxp_stop_hc();
 302         usb_put_hcd(hcd);
 303         clk_disable(usb_pll_clk);
 304         clk_disable(usb_dev_clk);
 305         i2c_unregister_device(isp1301_i2c_client);
 306         isp1301_i2c_client = NULL;
 307
 308         return 0;
 309 }
 310
 311 /* work with hotplug and coldplug */
 312 MODULE_ALIAS("platform:usb-ohci");
 313
 314 #ifdef CONFIG_OF
 315 static const struct of_device_id ohci_hcd_nxp_match[] = {
 316         { .compatible = "nxp,ohci-nxp" },
 317         {},
 318 };
 319 MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match);
 320 #endif
 321
 322 static struct platform_driver ohci_hcd_nxp_driver = {
 323         .driver = {
 324                 .name = "usb-ohci",
 325                 .owner  = THIS_MODULE,
 326                 .of_match_table = of_match_ptr(ohci_hcd_nxp_match),
 327         },
 328         .probe = ohci_hcd_nxp_probe,
 329         .remove = ohci_hcd_nxp_remove,
 330 };
 331
 332 static int __init ohci_nxp_init(void)
 333 {
 334         if (usb_disabled())
 335                 return -ENODEV;
 336
 337         pr_info("%s: " DRIVER_DESC "\n", hcd_name);
 338
 339         ohci_init_driver(&ohci_nxp_hc_driver, NULL);
 340         return platform_driver_register(&ohci_hcd_nxp_driver);
 341 }
 342 module_init(ohci_nxp_init);
 343
 344 static void __exit ohci_nxp_cleanup(void)
 345 {
 346         platform_driver_unregister(&ohci_hcd_nxp_driver);
 347 }
 348 module_exit(ohci_nxp_cleanup);
 349
 350 MODULE_DESCRIPTION(DRIVER_DESC);
 351 MODULE_LICENSE("GPL v2");