mm: revert "page-writeback.c: subtract min_free_kbytes from dirtyable memory"

[linux/fpc-iii.git] / arch / x86 / kernel / hw_breakpoint.c

/*
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
 *
 * Copyright (C) 2007 Alan Stern
 * Copyright (C) 2009 IBM Corporation
 * Copyright (C) 2009 Frederic Weisbecker <fweisbec@gmail.com>
 *
 * Authors: Alan Stern <stern@rowland.harvard.edu>
 *          K.Prasad <prasad@linux.vnet.ibm.com>
 *          Frederic Weisbecker <fweisbec@gmail.com>
 */

/*
 * HW_breakpoint: a unified kernel/user-space hardware breakpoint facility,
 * using the CPU's debug registers.
 */

#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <linux/irqflags.h>
#include <linux/notifier.h>
#include <linux/kallsyms.h>
#include <linux/kprobes.h>
#include <linux/percpu.h>
#include <linux/kdebug.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/smp.h>

#include <asm/hw_breakpoint.h>
#include <asm/processor.h>
#include <asm/debugreg.h>

/* Per cpu debug control register value */
DEFINE_PER_CPU(unsigned long, cpu_dr7);
EXPORT_PER_CPU_SYMBOL(cpu_dr7);

/* Per cpu debug address registers values */
static DEFINE_PER_CPU(unsigned long, cpu_debugreg[HBP_NUM]);

/*
 * Stores the breakpoints currently in use on each breakpoint address
 * register for each cpus
 */
static DEFINE_PER_CPU(struct perf_event *, bp_per_reg[HBP_NUM]);


static inline unsigned long
__encode_dr7(int drnum, unsigned int len, unsigned int type)
{
        unsigned long bp_info;

        bp_info = (len | type) & 0xf;
        bp_info <<= (DR_CONTROL_SHIFT + drnum * DR_CONTROL_SIZE);
        bp_info |= (DR_GLOBAL_ENABLE << (drnum * DR_ENABLE_SIZE));

        return bp_info;
}

/*
 * Encode the length, type, Exact, and Enable bits for a particular breakpoint
 * as stored in debug register 7.
 */
unsigned long encode_dr7(int drnum, unsigned int len, unsigned int type)
{
        return __encode_dr7(drnum, len, type) | DR_GLOBAL_SLOWDOWN;
}

/*
 * Decode the length and type bits for a particular breakpoint as
 * stored in debug register 7.  Return the "enabled" status.
 */
int decode_dr7(unsigned long dr7, int bpnum, unsigned *len, unsigned *type)
{
        int bp_info = dr7 >> (DR_CONTROL_SHIFT + bpnum * DR_CONTROL_SIZE);

        *len = (bp_info & 0xc) | 0x40;
        *type = (bp_info & 0x3) | 0x80;

        return (dr7 >> (bpnum * DR_ENABLE_SIZE)) & 0x3;
}

/*
 * Install a perf counter breakpoint.
 *
 * We seek a free debug address register and use it for this
 * breakpoint. Eventually we enable it in the debug control register.
 *
 * Atomic: we hold the counter->ctx->lock and we only handle variables
 * and registers local to this cpu.
 */
int arch_install_hw_breakpoint(struct perf_event *bp)
{
        struct arch_hw_breakpoint *info = counter_arch_bp(bp);
        unsigned long *dr7;
        int i;

        for (i = 0; i < HBP_NUM; i++) {
                struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);

                if (!*slot) {
                        *slot = bp;
                        break;
                }
        }

        if (WARN_ONCE(i == HBP_NUM, "Can't find any breakpoint slot"))
                return -EBUSY;

        set_debugreg(info->address, i);
        __this_cpu_write(cpu_debugreg[i], info->address);

        dr7 = &__get_cpu_var(cpu_dr7);
        *dr7 |= encode_dr7(i, info->len, info->type);

        set_debugreg(*dr7, 7);

        return 0;
}

/*
 * Uninstall the breakpoint contained in the given counter.
 *
 * First we search the debug address register it uses and then we disable
 * it.
 *
 * Atomic: we hold the counter->ctx->lock and we only handle variables
 * and registers local to this cpu.
 */
void arch_uninstall_hw_breakpoint(struct perf_event *bp)
{
        struct arch_hw_breakpoint *info = counter_arch_bp(bp);
        unsigned long *dr7;
        int i;

        for (i = 0; i < HBP_NUM; i++) {
                struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);

                if (*slot == bp) {
                        *slot = NULL;
                        break;
                }
        }

        if (WARN_ONCE(i == HBP_NUM, "Can't find any breakpoint slot"))
                return;

        dr7 = &__get_cpu_var(cpu_dr7);
        *dr7 &= ~__encode_dr7(i, info->len, info->type);

        set_debugreg(*dr7, 7);
}

static int get_hbp_len(u8 hbp_len)
{
        unsigned int len_in_bytes = 0;

        switch (hbp_len) {
        case X86_BREAKPOINT_LEN_1:
                len_in_bytes = 1;
                break;
        case X86_BREAKPOINT_LEN_2:
                len_in_bytes = 2;
                break;
        case X86_BREAKPOINT_LEN_4:
                len_in_bytes = 4;
                break;
#ifdef CONFIG_X86_64
        case X86_BREAKPOINT_LEN_8:
                len_in_bytes = 8;
                break;
#endif
        }
        return len_in_bytes;
}

/*
 * Check for virtual address in kernel space.
 */
int arch_check_bp_in_kernelspace(struct perf_event *bp)
{
        unsigned int len;
        unsigned long va;
        struct arch_hw_breakpoint *info = counter_arch_bp(bp);

        va = info->address;
        len = get_hbp_len(info->len);

        return (va >= TASK_SIZE) && ((va + len - 1) >= TASK_SIZE);
}

int arch_bp_generic_fields(int x86_len, int x86_type,
                           int *gen_len, int *gen_type)
{
        /* Type */
        switch (x86_type) {
        case X86_BREAKPOINT_EXECUTE:
                if (x86_len != X86_BREAKPOINT_LEN_X)
                        return -EINVAL;

                *gen_type = HW_BREAKPOINT_X;
                *gen_len = sizeof(long);
                return 0;
        case X86_BREAKPOINT_WRITE:
                *gen_type = HW_BREAKPOINT_W;
                break;
        case X86_BREAKPOINT_RW:
                *gen_type = HW_BREAKPOINT_W | HW_BREAKPOINT_R;
                break;
        default:
                return -EINVAL;
        }

        /* Len */
        switch (x86_len) {
        case X86_BREAKPOINT_LEN_1:
                *gen_len = HW_BREAKPOINT_LEN_1;
                break;
        case X86_BREAKPOINT_LEN_2:
                *gen_len = HW_BREAKPOINT_LEN_2;
                break;
        case X86_BREAKPOINT_LEN_4:
                *gen_len = HW_BREAKPOINT_LEN_4;
                break;
#ifdef CONFIG_X86_64
        case X86_BREAKPOINT_LEN_8:
                *gen_len = HW_BREAKPOINT_LEN_8;
                break;
#endif
        default:
                return -EINVAL;
        }

        return 0;
}


static int arch_build_bp_info(struct perf_event *bp)
{
        struct arch_hw_breakpoint *info = counter_arch_bp(bp);

        info->address = bp->attr.bp_addr;

        /* Type */
        switch (bp->attr.bp_type) {
        case HW_BREAKPOINT_W:
                info->type = X86_BREAKPOINT_WRITE;
                break;
        case HW_BREAKPOINT_W | HW_BREAKPOINT_R:
                info->type = X86_BREAKPOINT_RW;
                break;
        case HW_BREAKPOINT_X:
                info->type = X86_BREAKPOINT_EXECUTE;
                /*
                 * x86 inst breakpoints need to have a specific undefined len.
                 * But we still need to check userspace is not trying to setup
                 * an unsupported length, to get a range breakpoint for example.
                 */
                if (bp->attr.bp_len == sizeof(long)) {
                        info->len = X86_BREAKPOINT_LEN_X;
                        return 0;
                }
        default:
                return -EINVAL;
        }

        /* Len */
        switch (bp->attr.bp_len) {
        case HW_BREAKPOINT_LEN_1:
                info->len = X86_BREAKPOINT_LEN_1;
                break;
        case HW_BREAKPOINT_LEN_2:
                info->len = X86_BREAKPOINT_LEN_2;
                break;
        case HW_BREAKPOINT_LEN_4:
                info->len = X86_BREAKPOINT_LEN_4;
                break;
#ifdef CONFIG_X86_64
        case HW_BREAKPOINT_LEN_8:
                info->len = X86_BREAKPOINT_LEN_8;
                break;
#endif
        default:
                return -EINVAL;
        }

        return 0;
}
/*
 * Validate the arch-specific HW Breakpoint register settings
 */
int arch_validate_hwbkpt_settings(struct perf_event *bp)
{
        struct arch_hw_breakpoint *info = counter_arch_bp(bp);
        unsigned int align;
        int ret;


        ret = arch_build_bp_info(bp);
        if (ret)
                return ret;

        ret = -EINVAL;

        switch (info->len) {
        case X86_BREAKPOINT_LEN_1:
                align = 0;
                break;
        case X86_BREAKPOINT_LEN_2:
                align = 1;
                break;
        case X86_BREAKPOINT_LEN_4:
                align = 3;
                break;
#ifdef CONFIG_X86_64
        case X86_BREAKPOINT_LEN_8:
                align = 7;
                break;
#endif
        default:
                return ret;
        }

        /*
         * Check that the low-order bits of the address are appropriate
         * for the alignment implied by len.
         */
        if (info->address & align)
                return -EINVAL;

        return 0;
}

/*
 * Dump the debug register contents to the user.
 * We can't dump our per cpu values because it
 * may contain cpu wide breakpoint, something that
 * doesn't belong to the current task.
 *
 * TODO: include non-ptrace user breakpoints (perf)
 */
void aout_dump_debugregs(struct user *dump)
{
        int i;
        int dr7 = 0;
        struct perf_event *bp;
        struct arch_hw_breakpoint *info;
        struct thread_struct *thread = &current->thread;

        for (i = 0; i < HBP_NUM; i++) {
                bp = thread->ptrace_bps[i];

                if (bp && !bp->attr.disabled) {
                        dump->u_debugreg[i] = bp->attr.bp_addr;
                        info = counter_arch_bp(bp);
                        dr7 |= encode_dr7(i, info->len, info->type);
                } else {
                        dump->u_debugreg[i] = 0;
                }
        }

        dump->u_debugreg[4] = 0;
        dump->u_debugreg[5] = 0;
        dump->u_debugreg[6] = current->thread.debugreg6;

        dump->u_debugreg[7] = dr7;
}
EXPORT_SYMBOL_GPL(aout_dump_debugregs);

/*
 * Release the user breakpoints used by ptrace
 */
void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
{
        int i;
        struct thread_struct *t = &tsk->thread;

        for (i = 0; i < HBP_NUM; i++) {
                unregister_hw_breakpoint(t->ptrace_bps[i]);
                t->ptrace_bps[i] = NULL;
        }

        t->debugreg6 = 0;
        t->ptrace_dr7 = 0;
}

void hw_breakpoint_restore(void)
{
        set_debugreg(__this_cpu_read(cpu_debugreg[0]), 0);
        set_debugreg(__this_cpu_read(cpu_debugreg[1]), 1);
        set_debugreg(__this_cpu_read(cpu_debugreg[2]), 2);
        set_debugreg(__this_cpu_read(cpu_debugreg[3]), 3);
        set_debugreg(current->thread.debugreg6, 6);
        set_debugreg(__this_cpu_read(cpu_dr7), 7);
}
EXPORT_SYMBOL_GPL(hw_breakpoint_restore);

/*
 * Handle debug exception notifications.
 *
 * Return value is either NOTIFY_STOP or NOTIFY_DONE as explained below.
 *
 * NOTIFY_DONE returned if one of the following conditions is true.
 * i) When the causative address is from user-space and the exception
 * is a valid one, i.e. not triggered as a result of lazy debug register
 * switching
 * ii) When there are more bits than trap<n> set in DR6 register (such
 * as BD, BS or BT) indicating that more than one debug condition is
 * met and requires some more action in do_debug().
 *
 * NOTIFY_STOP returned for all other cases
 *
 */
static int __kprobes hw_breakpoint_handler(struct die_args *args)
{
        int i, cpu, rc = NOTIFY_STOP;
        struct perf_event *bp;
        unsigned long dr7, dr6;
        unsigned long *dr6_p;

        /* The DR6 value is pointed by args->err */
        dr6_p = (unsigned long *)ERR_PTR(args->err);
        dr6 = *dr6_p;

        /* If it's a single step, TRAP bits are random */
        if (dr6 & DR_STEP)
                return NOTIFY_DONE;

        /* Do an early return if no trap bits are set in DR6 */
        if ((dr6 & DR_TRAP_BITS) == 0)
                return NOTIFY_DONE;

        get_debugreg(dr7, 7);
        /* Disable breakpoints during exception handling */
        set_debugreg(0UL, 7);
        /*
         * Assert that local interrupts are disabled
         * Reset the DRn bits in the virtualized register value.
         * The ptrace trigger routine will add in whatever is needed.
         */
        current->thread.debugreg6 &= ~DR_TRAP_BITS;
        cpu = get_cpu();

        /* Handle all the breakpoints that were triggered */
        for (i = 0; i < HBP_NUM; ++i) {
                if (likely(!(dr6 & (DR_TRAP0 << i))))
                        continue;

                /*
                 * The counter may be concurrently released but that can only
                 * occur from a call_rcu() path. We can then safely fetch
                 * the breakpoint, use its callback, touch its counter
                 * while we are in an rcu_read_lock() path.
                 */
                rcu_read_lock();

                bp = per_cpu(bp_per_reg[i], cpu);
                /*
                 * Reset the 'i'th TRAP bit in dr6 to denote completion of
                 * exception handling
                 */
                (*dr6_p) &= ~(DR_TRAP0 << i);
                /*
                 * bp can be NULL due to lazy debug register switching
                 * or due to concurrent perf counter removing.
                 */
                if (!bp) {
                        rcu_read_unlock();
                        break;
                }

                perf_bp_event(bp, args->regs);

                /*
                 * Set up resume flag to avoid breakpoint recursion when
                 * returning back to origin.
                 */
                if (bp->hw.info.type == X86_BREAKPOINT_EXECUTE)
                        args->regs->flags |= X86_EFLAGS_RF;

                rcu_read_unlock();
        }
        /*
         * Further processing in do_debug() is needed for a) user-space
         * breakpoints (to generate signals) and b) when the system has
         * taken exception due to multiple causes
         */
        if ((current->thread.debugreg6 & DR_TRAP_BITS) ||
            (dr6 & (~DR_TRAP_BITS)))
                rc = NOTIFY_DONE;

        set_debugreg(dr7, 7);
        put_cpu();

        return rc;
}

/*
 * Handle debug exception notifications.
 */
int __kprobes hw_breakpoint_exceptions_notify(
                struct notifier_block *unused, unsigned long val, void *data)
{
        if (val != DIE_DEBUG)
                return NOTIFY_DONE;

        return hw_breakpoint_handler(data);
}

void hw_breakpoint_pmu_read(struct perf_event *bp)
{
        /* TODO */
}