qed: Add support for processing iscsi tlv request.
[linux/fpc-iii.git] / kernel / cpu.c
blob0db8938fbb236e58284927040e19998718ae74e7
1 /* CPU control.
2 * (C) 2001, 2002, 2003, 2004 Rusty Russell
4 * This code is licenced under the GPL.
5 */
6 #include <linux/proc_fs.h>
7 #include <linux/smp.h>
8 #include <linux/init.h>
9 #include <linux/notifier.h>
10 #include <linux/sched/signal.h>
11 #include <linux/sched/hotplug.h>
12 #include <linux/sched/task.h>
13 #include <linux/unistd.h>
14 #include <linux/cpu.h>
15 #include <linux/oom.h>
16 #include <linux/rcupdate.h>
17 #include <linux/export.h>
18 #include <linux/bug.h>
19 #include <linux/kthread.h>
20 #include <linux/stop_machine.h>
21 #include <linux/mutex.h>
22 #include <linux/gfp.h>
23 #include <linux/suspend.h>
24 #include <linux/lockdep.h>
25 #include <linux/tick.h>
26 #include <linux/irq.h>
27 #include <linux/nmi.h>
28 #include <linux/smpboot.h>
29 #include <linux/relay.h>
30 #include <linux/slab.h>
31 #include <linux/percpu-rwsem.h>
33 #include <trace/events/power.h>
34 #define CREATE_TRACE_POINTS
35 #include <trace/events/cpuhp.h>
37 #include "smpboot.h"
39 /**
40 * cpuhp_cpu_state - Per cpu hotplug state storage
41 * @state: The current cpu state
42 * @target: The target state
43 * @thread: Pointer to the hotplug thread
44 * @should_run: Thread should execute
45 * @rollback: Perform a rollback
46 * @single: Single callback invocation
47 * @bringup: Single callback bringup or teardown selector
48 * @cb_state: The state for a single callback (install/uninstall)
49 * @result: Result of the operation
50 * @done_up: Signal completion to the issuer of the task for cpu-up
51 * @done_down: Signal completion to the issuer of the task for cpu-down
53 struct cpuhp_cpu_state {
54 enum cpuhp_state state;
55 enum cpuhp_state target;
56 enum cpuhp_state fail;
57 #ifdef CONFIG_SMP
58 struct task_struct *thread;
59 bool should_run;
60 bool rollback;
61 bool single;
62 bool bringup;
63 struct hlist_node *node;
64 struct hlist_node *last;
65 enum cpuhp_state cb_state;
66 int result;
67 struct completion done_up;
68 struct completion done_down;
69 #endif
72 static DEFINE_PER_CPU(struct cpuhp_cpu_state, cpuhp_state) = {
73 .fail = CPUHP_INVALID,
76 #if defined(CONFIG_LOCKDEP) && defined(CONFIG_SMP)
77 static struct lockdep_map cpuhp_state_up_map =
78 STATIC_LOCKDEP_MAP_INIT("cpuhp_state-up", &cpuhp_state_up_map);
79 static struct lockdep_map cpuhp_state_down_map =
80 STATIC_LOCKDEP_MAP_INIT("cpuhp_state-down", &cpuhp_state_down_map);
83 static inline void cpuhp_lock_acquire(bool bringup)
85 lock_map_acquire(bringup ? &cpuhp_state_up_map : &cpuhp_state_down_map);
88 static inline void cpuhp_lock_release(bool bringup)
90 lock_map_release(bringup ? &cpuhp_state_up_map : &cpuhp_state_down_map);
92 #else
94 static inline void cpuhp_lock_acquire(bool bringup) { }
95 static inline void cpuhp_lock_release(bool bringup) { }
97 #endif
99 /**
100 * cpuhp_step - Hotplug state machine step
101 * @name: Name of the step
102 * @startup: Startup function of the step
103 * @teardown: Teardown function of the step
104 * @skip_onerr: Do not invoke the functions on error rollback
105 * Will go away once the notifiers are gone
106 * @cant_stop: Bringup/teardown can't be stopped at this step
108 struct cpuhp_step {
109 const char *name;
110 union {
111 int (*single)(unsigned int cpu);
112 int (*multi)(unsigned int cpu,
113 struct hlist_node *node);
114 } startup;
115 union {
116 int (*single)(unsigned int cpu);
117 int (*multi)(unsigned int cpu,
118 struct hlist_node *node);
119 } teardown;
120 struct hlist_head list;
121 bool skip_onerr;
122 bool cant_stop;
123 bool multi_instance;
126 static DEFINE_MUTEX(cpuhp_state_mutex);
127 static struct cpuhp_step cpuhp_hp_states[];
129 static struct cpuhp_step *cpuhp_get_step(enum cpuhp_state state)
131 return cpuhp_hp_states + state;
135 * cpuhp_invoke_callback _ Invoke the callbacks for a given state
136 * @cpu: The cpu for which the callback should be invoked
137 * @state: The state to do callbacks for
138 * @bringup: True if the bringup callback should be invoked
139 * @node: For multi-instance, do a single entry callback for install/remove
140 * @lastp: For multi-instance rollback, remember how far we got
142 * Called from cpu hotplug and from the state register machinery.
144 static int cpuhp_invoke_callback(unsigned int cpu, enum cpuhp_state state,
145 bool bringup, struct hlist_node *node,
146 struct hlist_node **lastp)
148 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
149 struct cpuhp_step *step = cpuhp_get_step(state);
150 int (*cbm)(unsigned int cpu, struct hlist_node *node);
151 int (*cb)(unsigned int cpu);
152 int ret, cnt;
154 if (st->fail == state) {
155 st->fail = CPUHP_INVALID;
157 if (!(bringup ? step->startup.single : step->teardown.single))
158 return 0;
160 return -EAGAIN;
163 if (!step->multi_instance) {
164 WARN_ON_ONCE(lastp && *lastp);
165 cb = bringup ? step->startup.single : step->teardown.single;
166 if (!cb)
167 return 0;
168 trace_cpuhp_enter(cpu, st->target, state, cb);
169 ret = cb(cpu);
170 trace_cpuhp_exit(cpu, st->state, state, ret);
171 return ret;
173 cbm = bringup ? step->startup.multi : step->teardown.multi;
174 if (!cbm)
175 return 0;
177 /* Single invocation for instance add/remove */
178 if (node) {
179 WARN_ON_ONCE(lastp && *lastp);
180 trace_cpuhp_multi_enter(cpu, st->target, state, cbm, node);
181 ret = cbm(cpu, node);
182 trace_cpuhp_exit(cpu, st->state, state, ret);
183 return ret;
186 /* State transition. Invoke on all instances */
187 cnt = 0;
188 hlist_for_each(node, &step->list) {
189 if (lastp && node == *lastp)
190 break;
192 trace_cpuhp_multi_enter(cpu, st->target, state, cbm, node);
193 ret = cbm(cpu, node);
194 trace_cpuhp_exit(cpu, st->state, state, ret);
195 if (ret) {
196 if (!lastp)
197 goto err;
199 *lastp = node;
200 return ret;
202 cnt++;
204 if (lastp)
205 *lastp = NULL;
206 return 0;
207 err:
208 /* Rollback the instances if one failed */
209 cbm = !bringup ? step->startup.multi : step->teardown.multi;
210 if (!cbm)
211 return ret;
213 hlist_for_each(node, &step->list) {
214 if (!cnt--)
215 break;
217 trace_cpuhp_multi_enter(cpu, st->target, state, cbm, node);
218 ret = cbm(cpu, node);
219 trace_cpuhp_exit(cpu, st->state, state, ret);
221 * Rollback must not fail,
223 WARN_ON_ONCE(ret);
225 return ret;
228 #ifdef CONFIG_SMP
229 static bool cpuhp_is_ap_state(enum cpuhp_state state)
232 * The extra check for CPUHP_TEARDOWN_CPU is only for documentation
233 * purposes as that state is handled explicitly in cpu_down.
235 return state > CPUHP_BRINGUP_CPU && state != CPUHP_TEARDOWN_CPU;
238 static inline void wait_for_ap_thread(struct cpuhp_cpu_state *st, bool bringup)
240 struct completion *done = bringup ? &st->done_up : &st->done_down;
241 wait_for_completion(done);
244 static inline void complete_ap_thread(struct cpuhp_cpu_state *st, bool bringup)
246 struct completion *done = bringup ? &st->done_up : &st->done_down;
247 complete(done);
251 * The former STARTING/DYING states, ran with IRQs disabled and must not fail.
253 static bool cpuhp_is_atomic_state(enum cpuhp_state state)
255 return CPUHP_AP_IDLE_DEAD <= state && state < CPUHP_AP_ONLINE;
258 /* Serializes the updates to cpu_online_mask, cpu_present_mask */
259 static DEFINE_MUTEX(cpu_add_remove_lock);
260 bool cpuhp_tasks_frozen;
261 EXPORT_SYMBOL_GPL(cpuhp_tasks_frozen);
264 * The following two APIs (cpu_maps_update_begin/done) must be used when
265 * attempting to serialize the updates to cpu_online_mask & cpu_present_mask.
267 void cpu_maps_update_begin(void)
269 mutex_lock(&cpu_add_remove_lock);
272 void cpu_maps_update_done(void)
274 mutex_unlock(&cpu_add_remove_lock);
278 * If set, cpu_up and cpu_down will return -EBUSY and do nothing.
279 * Should always be manipulated under cpu_add_remove_lock
281 static int cpu_hotplug_disabled;
283 #ifdef CONFIG_HOTPLUG_CPU
285 DEFINE_STATIC_PERCPU_RWSEM(cpu_hotplug_lock);
287 void cpus_read_lock(void)
289 percpu_down_read(&cpu_hotplug_lock);
291 EXPORT_SYMBOL_GPL(cpus_read_lock);
293 void cpus_read_unlock(void)
295 percpu_up_read(&cpu_hotplug_lock);
297 EXPORT_SYMBOL_GPL(cpus_read_unlock);
299 void cpus_write_lock(void)
301 percpu_down_write(&cpu_hotplug_lock);
304 void cpus_write_unlock(void)
306 percpu_up_write(&cpu_hotplug_lock);
309 void lockdep_assert_cpus_held(void)
311 percpu_rwsem_assert_held(&cpu_hotplug_lock);
315 * Wait for currently running CPU hotplug operations to complete (if any) and
316 * disable future CPU hotplug (from sysfs). The 'cpu_add_remove_lock' protects
317 * the 'cpu_hotplug_disabled' flag. The same lock is also acquired by the
318 * hotplug path before performing hotplug operations. So acquiring that lock
319 * guarantees mutual exclusion from any currently running hotplug operations.
321 void cpu_hotplug_disable(void)
323 cpu_maps_update_begin();
324 cpu_hotplug_disabled++;
325 cpu_maps_update_done();
327 EXPORT_SYMBOL_GPL(cpu_hotplug_disable);
329 static void __cpu_hotplug_enable(void)
331 if (WARN_ONCE(!cpu_hotplug_disabled, "Unbalanced cpu hotplug enable\n"))
332 return;
333 cpu_hotplug_disabled--;
336 void cpu_hotplug_enable(void)
338 cpu_maps_update_begin();
339 __cpu_hotplug_enable();
340 cpu_maps_update_done();
342 EXPORT_SYMBOL_GPL(cpu_hotplug_enable);
343 #endif /* CONFIG_HOTPLUG_CPU */
345 static inline enum cpuhp_state
346 cpuhp_set_state(struct cpuhp_cpu_state *st, enum cpuhp_state target)
348 enum cpuhp_state prev_state = st->state;
350 st->rollback = false;
351 st->last = NULL;
353 st->target = target;
354 st->single = false;
355 st->bringup = st->state < target;
357 return prev_state;
360 static inline void
361 cpuhp_reset_state(struct cpuhp_cpu_state *st, enum cpuhp_state prev_state)
363 st->rollback = true;
366 * If we have st->last we need to undo partial multi_instance of this
367 * state first. Otherwise start undo at the previous state.
369 if (!st->last) {
370 if (st->bringup)
371 st->state--;
372 else
373 st->state++;
376 st->target = prev_state;
377 st->bringup = !st->bringup;
380 /* Regular hotplug invocation of the AP hotplug thread */
381 static void __cpuhp_kick_ap(struct cpuhp_cpu_state *st)
383 if (!st->single && st->state == st->target)
384 return;
386 st->result = 0;
388 * Make sure the above stores are visible before should_run becomes
389 * true. Paired with the mb() above in cpuhp_thread_fun()
391 smp_mb();
392 st->should_run = true;
393 wake_up_process(st->thread);
394 wait_for_ap_thread(st, st->bringup);
397 static int cpuhp_kick_ap(struct cpuhp_cpu_state *st, enum cpuhp_state target)
399 enum cpuhp_state prev_state;
400 int ret;
402 prev_state = cpuhp_set_state(st, target);
403 __cpuhp_kick_ap(st);
404 if ((ret = st->result)) {
405 cpuhp_reset_state(st, prev_state);
406 __cpuhp_kick_ap(st);
409 return ret;
412 static int bringup_wait_for_ap(unsigned int cpu)
414 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
416 /* Wait for the CPU to reach CPUHP_AP_ONLINE_IDLE */
417 wait_for_ap_thread(st, true);
418 if (WARN_ON_ONCE((!cpu_online(cpu))))
419 return -ECANCELED;
421 /* Unpark the stopper thread and the hotplug thread of the target cpu */
422 stop_machine_unpark(cpu);
423 kthread_unpark(st->thread);
425 if (st->target <= CPUHP_AP_ONLINE_IDLE)
426 return 0;
428 return cpuhp_kick_ap(st, st->target);
431 static int bringup_cpu(unsigned int cpu)
433 struct task_struct *idle = idle_thread_get(cpu);
434 int ret;
437 * Some architectures have to walk the irq descriptors to
438 * setup the vector space for the cpu which comes online.
439 * Prevent irq alloc/free across the bringup.
441 irq_lock_sparse();
443 /* Arch-specific enabling code. */
444 ret = __cpu_up(cpu, idle);
445 irq_unlock_sparse();
446 if (ret)
447 return ret;
448 return bringup_wait_for_ap(cpu);
452 * Hotplug state machine related functions
455 static void undo_cpu_up(unsigned int cpu, struct cpuhp_cpu_state *st)
457 for (st->state--; st->state > st->target; st->state--) {
458 struct cpuhp_step *step = cpuhp_get_step(st->state);
460 if (!step->skip_onerr)
461 cpuhp_invoke_callback(cpu, st->state, false, NULL, NULL);
465 static int cpuhp_up_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st,
466 enum cpuhp_state target)
468 enum cpuhp_state prev_state = st->state;
469 int ret = 0;
471 while (st->state < target) {
472 st->state++;
473 ret = cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL);
474 if (ret) {
475 st->target = prev_state;
476 undo_cpu_up(cpu, st);
477 break;
480 return ret;
484 * The cpu hotplug threads manage the bringup and teardown of the cpus
486 static void cpuhp_create(unsigned int cpu)
488 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
490 init_completion(&st->done_up);
491 init_completion(&st->done_down);
494 static int cpuhp_should_run(unsigned int cpu)
496 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
498 return st->should_run;
502 * Execute teardown/startup callbacks on the plugged cpu. Also used to invoke
503 * callbacks when a state gets [un]installed at runtime.
505 * Each invocation of this function by the smpboot thread does a single AP
506 * state callback.
508 * It has 3 modes of operation:
509 * - single: runs st->cb_state
510 * - up: runs ++st->state, while st->state < st->target
511 * - down: runs st->state--, while st->state > st->target
513 * When complete or on error, should_run is cleared and the completion is fired.
515 static void cpuhp_thread_fun(unsigned int cpu)
517 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
518 bool bringup = st->bringup;
519 enum cpuhp_state state;
522 * ACQUIRE for the cpuhp_should_run() load of ->should_run. Ensures
523 * that if we see ->should_run we also see the rest of the state.
525 smp_mb();
527 if (WARN_ON_ONCE(!st->should_run))
528 return;
530 cpuhp_lock_acquire(bringup);
532 if (st->single) {
533 state = st->cb_state;
534 st->should_run = false;
535 } else {
536 if (bringup) {
537 st->state++;
538 state = st->state;
539 st->should_run = (st->state < st->target);
540 WARN_ON_ONCE(st->state > st->target);
541 } else {
542 state = st->state;
543 st->state--;
544 st->should_run = (st->state > st->target);
545 WARN_ON_ONCE(st->state < st->target);
549 WARN_ON_ONCE(!cpuhp_is_ap_state(state));
551 if (st->rollback) {
552 struct cpuhp_step *step = cpuhp_get_step(state);
553 if (step->skip_onerr)
554 goto next;
557 if (cpuhp_is_atomic_state(state)) {
558 local_irq_disable();
559 st->result = cpuhp_invoke_callback(cpu, state, bringup, st->node, &st->last);
560 local_irq_enable();
563 * STARTING/DYING must not fail!
565 WARN_ON_ONCE(st->result);
566 } else {
567 st->result = cpuhp_invoke_callback(cpu, state, bringup, st->node, &st->last);
570 if (st->result) {
572 * If we fail on a rollback, we're up a creek without no
573 * paddle, no way forward, no way back. We loose, thanks for
574 * playing.
576 WARN_ON_ONCE(st->rollback);
577 st->should_run = false;
580 next:
581 cpuhp_lock_release(bringup);
583 if (!st->should_run)
584 complete_ap_thread(st, bringup);
587 /* Invoke a single callback on a remote cpu */
588 static int
589 cpuhp_invoke_ap_callback(int cpu, enum cpuhp_state state, bool bringup,
590 struct hlist_node *node)
592 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
593 int ret;
595 if (!cpu_online(cpu))
596 return 0;
598 cpuhp_lock_acquire(false);
599 cpuhp_lock_release(false);
601 cpuhp_lock_acquire(true);
602 cpuhp_lock_release(true);
605 * If we are up and running, use the hotplug thread. For early calls
606 * we invoke the thread function directly.
608 if (!st->thread)
609 return cpuhp_invoke_callback(cpu, state, bringup, node, NULL);
611 st->rollback = false;
612 st->last = NULL;
614 st->node = node;
615 st->bringup = bringup;
616 st->cb_state = state;
617 st->single = true;
619 __cpuhp_kick_ap(st);
622 * If we failed and did a partial, do a rollback.
624 if ((ret = st->result) && st->last) {
625 st->rollback = true;
626 st->bringup = !bringup;
628 __cpuhp_kick_ap(st);
632 * Clean up the leftovers so the next hotplug operation wont use stale
633 * data.
635 st->node = st->last = NULL;
636 return ret;
639 static int cpuhp_kick_ap_work(unsigned int cpu)
641 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
642 enum cpuhp_state prev_state = st->state;
643 int ret;
645 cpuhp_lock_acquire(false);
646 cpuhp_lock_release(false);
648 cpuhp_lock_acquire(true);
649 cpuhp_lock_release(true);
651 trace_cpuhp_enter(cpu, st->target, prev_state, cpuhp_kick_ap_work);
652 ret = cpuhp_kick_ap(st, st->target);
653 trace_cpuhp_exit(cpu, st->state, prev_state, ret);
655 return ret;
658 static struct smp_hotplug_thread cpuhp_threads = {
659 .store = &cpuhp_state.thread,
660 .create = &cpuhp_create,
661 .thread_should_run = cpuhp_should_run,
662 .thread_fn = cpuhp_thread_fun,
663 .thread_comm = "cpuhp/%u",
664 .selfparking = true,
667 void __init cpuhp_threads_init(void)
669 BUG_ON(smpboot_register_percpu_thread(&cpuhp_threads));
670 kthread_unpark(this_cpu_read(cpuhp_state.thread));
673 #ifdef CONFIG_HOTPLUG_CPU
675 * clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU
676 * @cpu: a CPU id
678 * This function walks all processes, finds a valid mm struct for each one and
679 * then clears a corresponding bit in mm's cpumask. While this all sounds
680 * trivial, there are various non-obvious corner cases, which this function
681 * tries to solve in a safe manner.
683 * Also note that the function uses a somewhat relaxed locking scheme, so it may
684 * be called only for an already offlined CPU.
686 void clear_tasks_mm_cpumask(int cpu)
688 struct task_struct *p;
691 * This function is called after the cpu is taken down and marked
692 * offline, so its not like new tasks will ever get this cpu set in
693 * their mm mask. -- Peter Zijlstra
694 * Thus, we may use rcu_read_lock() here, instead of grabbing
695 * full-fledged tasklist_lock.
697 WARN_ON(cpu_online(cpu));
698 rcu_read_lock();
699 for_each_process(p) {
700 struct task_struct *t;
703 * Main thread might exit, but other threads may still have
704 * a valid mm. Find one.
706 t = find_lock_task_mm(p);
707 if (!t)
708 continue;
709 cpumask_clear_cpu(cpu, mm_cpumask(t->mm));
710 task_unlock(t);
712 rcu_read_unlock();
715 /* Take this CPU down. */
716 static int take_cpu_down(void *_param)
718 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
719 enum cpuhp_state target = max((int)st->target, CPUHP_AP_OFFLINE);
720 int err, cpu = smp_processor_id();
721 int ret;
723 /* Ensure this CPU doesn't handle any more interrupts. */
724 err = __cpu_disable();
725 if (err < 0)
726 return err;
729 * We get here while we are in CPUHP_TEARDOWN_CPU state and we must not
730 * do this step again.
732 WARN_ON(st->state != CPUHP_TEARDOWN_CPU);
733 st->state--;
734 /* Invoke the former CPU_DYING callbacks */
735 for (; st->state > target; st->state--) {
736 ret = cpuhp_invoke_callback(cpu, st->state, false, NULL, NULL);
738 * DYING must not fail!
740 WARN_ON_ONCE(ret);
743 /* Give up timekeeping duties */
744 tick_handover_do_timer();
745 /* Park the stopper thread */
746 stop_machine_park(cpu);
747 return 0;
750 static int takedown_cpu(unsigned int cpu)
752 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
753 int err;
755 /* Park the smpboot threads */
756 kthread_park(per_cpu_ptr(&cpuhp_state, cpu)->thread);
757 smpboot_park_threads(cpu);
760 * Prevent irq alloc/free while the dying cpu reorganizes the
761 * interrupt affinities.
763 irq_lock_sparse();
766 * So now all preempt/rcu users must observe !cpu_active().
768 err = stop_machine_cpuslocked(take_cpu_down, NULL, cpumask_of(cpu));
769 if (err) {
770 /* CPU refused to die */
771 irq_unlock_sparse();
772 /* Unpark the hotplug thread so we can rollback there */
773 kthread_unpark(per_cpu_ptr(&cpuhp_state, cpu)->thread);
774 return err;
776 BUG_ON(cpu_online(cpu));
779 * The teardown callback for CPUHP_AP_SCHED_STARTING will have removed
780 * all runnable tasks from the CPU, there's only the idle task left now
781 * that the migration thread is done doing the stop_machine thing.
783 * Wait for the stop thread to go away.
785 wait_for_ap_thread(st, false);
786 BUG_ON(st->state != CPUHP_AP_IDLE_DEAD);
788 /* Interrupts are moved away from the dying cpu, reenable alloc/free */
789 irq_unlock_sparse();
791 hotplug_cpu__broadcast_tick_pull(cpu);
792 /* This actually kills the CPU. */
793 __cpu_die(cpu);
795 tick_cleanup_dead_cpu(cpu);
796 rcutree_migrate_callbacks(cpu);
797 return 0;
800 static void cpuhp_complete_idle_dead(void *arg)
802 struct cpuhp_cpu_state *st = arg;
804 complete_ap_thread(st, false);
807 void cpuhp_report_idle_dead(void)
809 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
811 BUG_ON(st->state != CPUHP_AP_OFFLINE);
812 rcu_report_dead(smp_processor_id());
813 st->state = CPUHP_AP_IDLE_DEAD;
815 * We cannot call complete after rcu_report_dead() so we delegate it
816 * to an online cpu.
818 smp_call_function_single(cpumask_first(cpu_online_mask),
819 cpuhp_complete_idle_dead, st, 0);
822 static void undo_cpu_down(unsigned int cpu, struct cpuhp_cpu_state *st)
824 for (st->state++; st->state < st->target; st->state++) {
825 struct cpuhp_step *step = cpuhp_get_step(st->state);
827 if (!step->skip_onerr)
828 cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL);
832 static int cpuhp_down_callbacks(unsigned int cpu, struct cpuhp_cpu_state *st,
833 enum cpuhp_state target)
835 enum cpuhp_state prev_state = st->state;
836 int ret = 0;
838 for (; st->state > target; st->state--) {
839 ret = cpuhp_invoke_callback(cpu, st->state, false, NULL, NULL);
840 if (ret) {
841 st->target = prev_state;
842 undo_cpu_down(cpu, st);
843 break;
846 return ret;
849 /* Requires cpu_add_remove_lock to be held */
850 static int __ref _cpu_down(unsigned int cpu, int tasks_frozen,
851 enum cpuhp_state target)
853 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
854 int prev_state, ret = 0;
856 if (num_online_cpus() == 1)
857 return -EBUSY;
859 if (!cpu_present(cpu))
860 return -EINVAL;
862 cpus_write_lock();
864 cpuhp_tasks_frozen = tasks_frozen;
866 prev_state = cpuhp_set_state(st, target);
868 * If the current CPU state is in the range of the AP hotplug thread,
869 * then we need to kick the thread.
871 if (st->state > CPUHP_TEARDOWN_CPU) {
872 st->target = max((int)target, CPUHP_TEARDOWN_CPU);
873 ret = cpuhp_kick_ap_work(cpu);
875 * The AP side has done the error rollback already. Just
876 * return the error code..
878 if (ret)
879 goto out;
882 * We might have stopped still in the range of the AP hotplug
883 * thread. Nothing to do anymore.
885 if (st->state > CPUHP_TEARDOWN_CPU)
886 goto out;
888 st->target = target;
891 * The AP brought itself down to CPUHP_TEARDOWN_CPU. So we need
892 * to do the further cleanups.
894 ret = cpuhp_down_callbacks(cpu, st, target);
895 if (ret && st->state > CPUHP_TEARDOWN_CPU && st->state < prev_state) {
896 cpuhp_reset_state(st, prev_state);
897 __cpuhp_kick_ap(st);
900 out:
901 cpus_write_unlock();
903 * Do post unplug cleanup. This is still protected against
904 * concurrent CPU hotplug via cpu_add_remove_lock.
906 lockup_detector_cleanup();
907 return ret;
910 static int do_cpu_down(unsigned int cpu, enum cpuhp_state target)
912 int err;
914 cpu_maps_update_begin();
916 if (cpu_hotplug_disabled) {
917 err = -EBUSY;
918 goto out;
921 err = _cpu_down(cpu, 0, target);
923 out:
924 cpu_maps_update_done();
925 return err;
928 int cpu_down(unsigned int cpu)
930 return do_cpu_down(cpu, CPUHP_OFFLINE);
932 EXPORT_SYMBOL(cpu_down);
934 #else
935 #define takedown_cpu NULL
936 #endif /*CONFIG_HOTPLUG_CPU*/
939 * notify_cpu_starting(cpu) - Invoke the callbacks on the starting CPU
940 * @cpu: cpu that just started
942 * It must be called by the arch code on the new cpu, before the new cpu
943 * enables interrupts and before the "boot" cpu returns from __cpu_up().
945 void notify_cpu_starting(unsigned int cpu)
947 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
948 enum cpuhp_state target = min((int)st->target, CPUHP_AP_ONLINE);
949 int ret;
951 rcu_cpu_starting(cpu); /* Enables RCU usage on this CPU. */
952 while (st->state < target) {
953 st->state++;
954 ret = cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL);
956 * STARTING must not fail!
958 WARN_ON_ONCE(ret);
963 * Called from the idle task. Wake up the controlling task which brings the
964 * stopper and the hotplug thread of the upcoming CPU up and then delegates
965 * the rest of the online bringup to the hotplug thread.
967 void cpuhp_online_idle(enum cpuhp_state state)
969 struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state);
971 /* Happens for the boot cpu */
972 if (state != CPUHP_AP_ONLINE_IDLE)
973 return;
975 st->state = CPUHP_AP_ONLINE_IDLE;
976 complete_ap_thread(st, true);
979 /* Requires cpu_add_remove_lock to be held */
980 static int _cpu_up(unsigned int cpu, int tasks_frozen, enum cpuhp_state target)
982 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
983 struct task_struct *idle;
984 int ret = 0;
986 cpus_write_lock();
988 if (!cpu_present(cpu)) {
989 ret = -EINVAL;
990 goto out;
994 * The caller of do_cpu_up might have raced with another
995 * caller. Ignore it for now.
997 if (st->state >= target)
998 goto out;
1000 if (st->state == CPUHP_OFFLINE) {
1001 /* Let it fail before we try to bring the cpu up */
1002 idle = idle_thread_get(cpu);
1003 if (IS_ERR(idle)) {
1004 ret = PTR_ERR(idle);
1005 goto out;
1009 cpuhp_tasks_frozen = tasks_frozen;
1011 cpuhp_set_state(st, target);
1013 * If the current CPU state is in the range of the AP hotplug thread,
1014 * then we need to kick the thread once more.
1016 if (st->state > CPUHP_BRINGUP_CPU) {
1017 ret = cpuhp_kick_ap_work(cpu);
1019 * The AP side has done the error rollback already. Just
1020 * return the error code..
1022 if (ret)
1023 goto out;
1027 * Try to reach the target state. We max out on the BP at
1028 * CPUHP_BRINGUP_CPU. After that the AP hotplug thread is
1029 * responsible for bringing it up to the target state.
1031 target = min((int)target, CPUHP_BRINGUP_CPU);
1032 ret = cpuhp_up_callbacks(cpu, st, target);
1033 out:
1034 cpus_write_unlock();
1035 return ret;
1038 static int do_cpu_up(unsigned int cpu, enum cpuhp_state target)
1040 int err = 0;
1042 if (!cpu_possible(cpu)) {
1043 pr_err("can't online cpu %d because it is not configured as may-hotadd at boot time\n",
1044 cpu);
1045 #if defined(CONFIG_IA64)
1046 pr_err("please check additional_cpus= boot parameter\n");
1047 #endif
1048 return -EINVAL;
1051 err = try_online_node(cpu_to_node(cpu));
1052 if (err)
1053 return err;
1055 cpu_maps_update_begin();
1057 if (cpu_hotplug_disabled) {
1058 err = -EBUSY;
1059 goto out;
1062 err = _cpu_up(cpu, 0, target);
1063 out:
1064 cpu_maps_update_done();
1065 return err;
1068 int cpu_up(unsigned int cpu)
1070 return do_cpu_up(cpu, CPUHP_ONLINE);
1072 EXPORT_SYMBOL_GPL(cpu_up);
1074 #ifdef CONFIG_PM_SLEEP_SMP
1075 static cpumask_var_t frozen_cpus;
1077 int freeze_secondary_cpus(int primary)
1079 int cpu, error = 0;
1081 cpu_maps_update_begin();
1082 if (!cpu_online(primary))
1083 primary = cpumask_first(cpu_online_mask);
1085 * We take down all of the non-boot CPUs in one shot to avoid races
1086 * with the userspace trying to use the CPU hotplug at the same time
1088 cpumask_clear(frozen_cpus);
1090 pr_info("Disabling non-boot CPUs ...\n");
1091 for_each_online_cpu(cpu) {
1092 if (cpu == primary)
1093 continue;
1094 trace_suspend_resume(TPS("CPU_OFF"), cpu, true);
1095 error = _cpu_down(cpu, 1, CPUHP_OFFLINE);
1096 trace_suspend_resume(TPS("CPU_OFF"), cpu, false);
1097 if (!error)
1098 cpumask_set_cpu(cpu, frozen_cpus);
1099 else {
1100 pr_err("Error taking CPU%d down: %d\n", cpu, error);
1101 break;
1105 if (!error)
1106 BUG_ON(num_online_cpus() > 1);
1107 else
1108 pr_err("Non-boot CPUs are not disabled\n");
1111 * Make sure the CPUs won't be enabled by someone else. We need to do
1112 * this even in case of failure as all disable_nonboot_cpus() users are
1113 * supposed to do enable_nonboot_cpus() on the failure path.
1115 cpu_hotplug_disabled++;
1117 cpu_maps_update_done();
1118 return error;
1121 void __weak arch_enable_nonboot_cpus_begin(void)
1125 void __weak arch_enable_nonboot_cpus_end(void)
1129 void enable_nonboot_cpus(void)
1131 int cpu, error;
1133 /* Allow everyone to use the CPU hotplug again */
1134 cpu_maps_update_begin();
1135 __cpu_hotplug_enable();
1136 if (cpumask_empty(frozen_cpus))
1137 goto out;
1139 pr_info("Enabling non-boot CPUs ...\n");
1141 arch_enable_nonboot_cpus_begin();
1143 for_each_cpu(cpu, frozen_cpus) {
1144 trace_suspend_resume(TPS("CPU_ON"), cpu, true);
1145 error = _cpu_up(cpu, 1, CPUHP_ONLINE);
1146 trace_suspend_resume(TPS("CPU_ON"), cpu, false);
1147 if (!error) {
1148 pr_info("CPU%d is up\n", cpu);
1149 continue;
1151 pr_warn("Error taking CPU%d up: %d\n", cpu, error);
1154 arch_enable_nonboot_cpus_end();
1156 cpumask_clear(frozen_cpus);
1157 out:
1158 cpu_maps_update_done();
1161 static int __init alloc_frozen_cpus(void)
1163 if (!alloc_cpumask_var(&frozen_cpus, GFP_KERNEL|__GFP_ZERO))
1164 return -ENOMEM;
1165 return 0;
1167 core_initcall(alloc_frozen_cpus);
1170 * When callbacks for CPU hotplug notifications are being executed, we must
1171 * ensure that the state of the system with respect to the tasks being frozen
1172 * or not, as reported by the notification, remains unchanged *throughout the
1173 * duration* of the execution of the callbacks.
1174 * Hence we need to prevent the freezer from racing with regular CPU hotplug.
1176 * This synchronization is implemented by mutually excluding regular CPU
1177 * hotplug and Suspend/Hibernate call paths by hooking onto the Suspend/
1178 * Hibernate notifications.
1180 static int
1181 cpu_hotplug_pm_callback(struct notifier_block *nb,
1182 unsigned long action, void *ptr)
1184 switch (action) {
1186 case PM_SUSPEND_PREPARE:
1187 case PM_HIBERNATION_PREPARE:
1188 cpu_hotplug_disable();
1189 break;
1191 case PM_POST_SUSPEND:
1192 case PM_POST_HIBERNATION:
1193 cpu_hotplug_enable();
1194 break;
1196 default:
1197 return NOTIFY_DONE;
1200 return NOTIFY_OK;
1204 static int __init cpu_hotplug_pm_sync_init(void)
1207 * cpu_hotplug_pm_callback has higher priority than x86
1208 * bsp_pm_callback which depends on cpu_hotplug_pm_callback
1209 * to disable cpu hotplug to avoid cpu hotplug race.
1211 pm_notifier(cpu_hotplug_pm_callback, 0);
1212 return 0;
1214 core_initcall(cpu_hotplug_pm_sync_init);
1216 #endif /* CONFIG_PM_SLEEP_SMP */
1218 int __boot_cpu_id;
1220 #endif /* CONFIG_SMP */
1222 /* Boot processor state steps */
1223 static struct cpuhp_step cpuhp_hp_states[] = {
1224 [CPUHP_OFFLINE] = {
1225 .name = "offline",
1226 .startup.single = NULL,
1227 .teardown.single = NULL,
1229 #ifdef CONFIG_SMP
1230 [CPUHP_CREATE_THREADS]= {
1231 .name = "threads:prepare",
1232 .startup.single = smpboot_create_threads,
1233 .teardown.single = NULL,
1234 .cant_stop = true,
1236 [CPUHP_PERF_PREPARE] = {
1237 .name = "perf:prepare",
1238 .startup.single = perf_event_init_cpu,
1239 .teardown.single = perf_event_exit_cpu,
1241 [CPUHP_WORKQUEUE_PREP] = {
1242 .name = "workqueue:prepare",
1243 .startup.single = workqueue_prepare_cpu,
1244 .teardown.single = NULL,
1246 [CPUHP_HRTIMERS_PREPARE] = {
1247 .name = "hrtimers:prepare",
1248 .startup.single = hrtimers_prepare_cpu,
1249 .teardown.single = hrtimers_dead_cpu,
1251 [CPUHP_SMPCFD_PREPARE] = {
1252 .name = "smpcfd:prepare",
1253 .startup.single = smpcfd_prepare_cpu,
1254 .teardown.single = smpcfd_dead_cpu,
1256 [CPUHP_RELAY_PREPARE] = {
1257 .name = "relay:prepare",
1258 .startup.single = relay_prepare_cpu,
1259 .teardown.single = NULL,
1261 [CPUHP_SLAB_PREPARE] = {
1262 .name = "slab:prepare",
1263 .startup.single = slab_prepare_cpu,
1264 .teardown.single = slab_dead_cpu,
1266 [CPUHP_RCUTREE_PREP] = {
1267 .name = "RCU/tree:prepare",
1268 .startup.single = rcutree_prepare_cpu,
1269 .teardown.single = rcutree_dead_cpu,
1272 * On the tear-down path, timers_dead_cpu() must be invoked
1273 * before blk_mq_queue_reinit_notify() from notify_dead(),
1274 * otherwise a RCU stall occurs.
1276 [CPUHP_TIMERS_PREPARE] = {
1277 .name = "timers:dead",
1278 .startup.single = timers_prepare_cpu,
1279 .teardown.single = timers_dead_cpu,
1281 /* Kicks the plugged cpu into life */
1282 [CPUHP_BRINGUP_CPU] = {
1283 .name = "cpu:bringup",
1284 .startup.single = bringup_cpu,
1285 .teardown.single = NULL,
1286 .cant_stop = true,
1288 /* Final state before CPU kills itself */
1289 [CPUHP_AP_IDLE_DEAD] = {
1290 .name = "idle:dead",
1293 * Last state before CPU enters the idle loop to die. Transient state
1294 * for synchronization.
1296 [CPUHP_AP_OFFLINE] = {
1297 .name = "ap:offline",
1298 .cant_stop = true,
1300 /* First state is scheduler control. Interrupts are disabled */
1301 [CPUHP_AP_SCHED_STARTING] = {
1302 .name = "sched:starting",
1303 .startup.single = sched_cpu_starting,
1304 .teardown.single = sched_cpu_dying,
1306 [CPUHP_AP_RCUTREE_DYING] = {
1307 .name = "RCU/tree:dying",
1308 .startup.single = NULL,
1309 .teardown.single = rcutree_dying_cpu,
1311 [CPUHP_AP_SMPCFD_DYING] = {
1312 .name = "smpcfd:dying",
1313 .startup.single = NULL,
1314 .teardown.single = smpcfd_dying_cpu,
1316 /* Entry state on starting. Interrupts enabled from here on. Transient
1317 * state for synchronsization */
1318 [CPUHP_AP_ONLINE] = {
1319 .name = "ap:online",
1322 * Handled on controll processor until the plugged processor manages
1323 * this itself.
1325 [CPUHP_TEARDOWN_CPU] = {
1326 .name = "cpu:teardown",
1327 .startup.single = NULL,
1328 .teardown.single = takedown_cpu,
1329 .cant_stop = true,
1331 /* Handle smpboot threads park/unpark */
1332 [CPUHP_AP_SMPBOOT_THREADS] = {
1333 .name = "smpboot/threads:online",
1334 .startup.single = smpboot_unpark_threads,
1335 .teardown.single = NULL,
1337 [CPUHP_AP_IRQ_AFFINITY_ONLINE] = {
1338 .name = "irq/affinity:online",
1339 .startup.single = irq_affinity_online_cpu,
1340 .teardown.single = NULL,
1342 [CPUHP_AP_PERF_ONLINE] = {
1343 .name = "perf:online",
1344 .startup.single = perf_event_init_cpu,
1345 .teardown.single = perf_event_exit_cpu,
1347 [CPUHP_AP_WORKQUEUE_ONLINE] = {
1348 .name = "workqueue:online",
1349 .startup.single = workqueue_online_cpu,
1350 .teardown.single = workqueue_offline_cpu,
1352 [CPUHP_AP_RCUTREE_ONLINE] = {
1353 .name = "RCU/tree:online",
1354 .startup.single = rcutree_online_cpu,
1355 .teardown.single = rcutree_offline_cpu,
1357 #endif
1359 * The dynamically registered state space is here
1362 #ifdef CONFIG_SMP
1363 /* Last state is scheduler control setting the cpu active */
1364 [CPUHP_AP_ACTIVE] = {
1365 .name = "sched:active",
1366 .startup.single = sched_cpu_activate,
1367 .teardown.single = sched_cpu_deactivate,
1369 #endif
1371 /* CPU is fully up and running. */
1372 [CPUHP_ONLINE] = {
1373 .name = "online",
1374 .startup.single = NULL,
1375 .teardown.single = NULL,
1379 /* Sanity check for callbacks */
1380 static int cpuhp_cb_check(enum cpuhp_state state)
1382 if (state <= CPUHP_OFFLINE || state >= CPUHP_ONLINE)
1383 return -EINVAL;
1384 return 0;
1388 * Returns a free for dynamic slot assignment of the Online state. The states
1389 * are protected by the cpuhp_slot_states mutex and an empty slot is identified
1390 * by having no name assigned.
1392 static int cpuhp_reserve_state(enum cpuhp_state state)
1394 enum cpuhp_state i, end;
1395 struct cpuhp_step *step;
1397 switch (state) {
1398 case CPUHP_AP_ONLINE_DYN:
1399 step = cpuhp_hp_states + CPUHP_AP_ONLINE_DYN;
1400 end = CPUHP_AP_ONLINE_DYN_END;
1401 break;
1402 case CPUHP_BP_PREPARE_DYN:
1403 step = cpuhp_hp_states + CPUHP_BP_PREPARE_DYN;
1404 end = CPUHP_BP_PREPARE_DYN_END;
1405 break;
1406 default:
1407 return -EINVAL;
1410 for (i = state; i <= end; i++, step++) {
1411 if (!step->name)
1412 return i;
1414 WARN(1, "No more dynamic states available for CPU hotplug\n");
1415 return -ENOSPC;
1418 static int cpuhp_store_callbacks(enum cpuhp_state state, const char *name,
1419 int (*startup)(unsigned int cpu),
1420 int (*teardown)(unsigned int cpu),
1421 bool multi_instance)
1423 /* (Un)Install the callbacks for further cpu hotplug operations */
1424 struct cpuhp_step *sp;
1425 int ret = 0;
1428 * If name is NULL, then the state gets removed.
1430 * CPUHP_AP_ONLINE_DYN and CPUHP_BP_PREPARE_DYN are handed out on
1431 * the first allocation from these dynamic ranges, so the removal
1432 * would trigger a new allocation and clear the wrong (already
1433 * empty) state, leaving the callbacks of the to be cleared state
1434 * dangling, which causes wreckage on the next hotplug operation.
1436 if (name && (state == CPUHP_AP_ONLINE_DYN ||
1437 state == CPUHP_BP_PREPARE_DYN)) {
1438 ret = cpuhp_reserve_state(state);
1439 if (ret < 0)
1440 return ret;
1441 state = ret;
1443 sp = cpuhp_get_step(state);
1444 if (name && sp->name)
1445 return -EBUSY;
1447 sp->startup.single = startup;
1448 sp->teardown.single = teardown;
1449 sp->name = name;
1450 sp->multi_instance = multi_instance;
1451 INIT_HLIST_HEAD(&sp->list);
1452 return ret;
1455 static void *cpuhp_get_teardown_cb(enum cpuhp_state state)
1457 return cpuhp_get_step(state)->teardown.single;
1461 * Call the startup/teardown function for a step either on the AP or
1462 * on the current CPU.
1464 static int cpuhp_issue_call(int cpu, enum cpuhp_state state, bool bringup,
1465 struct hlist_node *node)
1467 struct cpuhp_step *sp = cpuhp_get_step(state);
1468 int ret;
1471 * If there's nothing to do, we done.
1472 * Relies on the union for multi_instance.
1474 if ((bringup && !sp->startup.single) ||
1475 (!bringup && !sp->teardown.single))
1476 return 0;
1478 * The non AP bound callbacks can fail on bringup. On teardown
1479 * e.g. module removal we crash for now.
1481 #ifdef CONFIG_SMP
1482 if (cpuhp_is_ap_state(state))
1483 ret = cpuhp_invoke_ap_callback(cpu, state, bringup, node);
1484 else
1485 ret = cpuhp_invoke_callback(cpu, state, bringup, node, NULL);
1486 #else
1487 ret = cpuhp_invoke_callback(cpu, state, bringup, node, NULL);
1488 #endif
1489 BUG_ON(ret && !bringup);
1490 return ret;
1494 * Called from __cpuhp_setup_state on a recoverable failure.
1496 * Note: The teardown callbacks for rollback are not allowed to fail!
1498 static void cpuhp_rollback_install(int failedcpu, enum cpuhp_state state,
1499 struct hlist_node *node)
1501 int cpu;
1503 /* Roll back the already executed steps on the other cpus */
1504 for_each_present_cpu(cpu) {
1505 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
1506 int cpustate = st->state;
1508 if (cpu >= failedcpu)
1509 break;
1511 /* Did we invoke the startup call on that cpu ? */
1512 if (cpustate >= state)
1513 cpuhp_issue_call(cpu, state, false, node);
1517 int __cpuhp_state_add_instance_cpuslocked(enum cpuhp_state state,
1518 struct hlist_node *node,
1519 bool invoke)
1521 struct cpuhp_step *sp;
1522 int cpu;
1523 int ret;
1525 lockdep_assert_cpus_held();
1527 sp = cpuhp_get_step(state);
1528 if (sp->multi_instance == false)
1529 return -EINVAL;
1531 mutex_lock(&cpuhp_state_mutex);
1533 if (!invoke || !sp->startup.multi)
1534 goto add_node;
1537 * Try to call the startup callback for each present cpu
1538 * depending on the hotplug state of the cpu.
1540 for_each_present_cpu(cpu) {
1541 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
1542 int cpustate = st->state;
1544 if (cpustate < state)
1545 continue;
1547 ret = cpuhp_issue_call(cpu, state, true, node);
1548 if (ret) {
1549 if (sp->teardown.multi)
1550 cpuhp_rollback_install(cpu, state, node);
1551 goto unlock;
1554 add_node:
1555 ret = 0;
1556 hlist_add_head(node, &sp->list);
1557 unlock:
1558 mutex_unlock(&cpuhp_state_mutex);
1559 return ret;
1562 int __cpuhp_state_add_instance(enum cpuhp_state state, struct hlist_node *node,
1563 bool invoke)
1565 int ret;
1567 cpus_read_lock();
1568 ret = __cpuhp_state_add_instance_cpuslocked(state, node, invoke);
1569 cpus_read_unlock();
1570 return ret;
1572 EXPORT_SYMBOL_GPL(__cpuhp_state_add_instance);
1575 * __cpuhp_setup_state_cpuslocked - Setup the callbacks for an hotplug machine state
1576 * @state: The state to setup
1577 * @invoke: If true, the startup function is invoked for cpus where
1578 * cpu state >= @state
1579 * @startup: startup callback function
1580 * @teardown: teardown callback function
1581 * @multi_instance: State is set up for multiple instances which get
1582 * added afterwards.
1584 * The caller needs to hold cpus read locked while calling this function.
1585 * Returns:
1586 * On success:
1587 * Positive state number if @state is CPUHP_AP_ONLINE_DYN
1588 * 0 for all other states
1589 * On failure: proper (negative) error code
1591 int __cpuhp_setup_state_cpuslocked(enum cpuhp_state state,
1592 const char *name, bool invoke,
1593 int (*startup)(unsigned int cpu),
1594 int (*teardown)(unsigned int cpu),
1595 bool multi_instance)
1597 int cpu, ret = 0;
1598 bool dynstate;
1600 lockdep_assert_cpus_held();
1602 if (cpuhp_cb_check(state) || !name)
1603 return -EINVAL;
1605 mutex_lock(&cpuhp_state_mutex);
1607 ret = cpuhp_store_callbacks(state, name, startup, teardown,
1608 multi_instance);
1610 dynstate = state == CPUHP_AP_ONLINE_DYN;
1611 if (ret > 0 && dynstate) {
1612 state = ret;
1613 ret = 0;
1616 if (ret || !invoke || !startup)
1617 goto out;
1620 * Try to call the startup callback for each present cpu
1621 * depending on the hotplug state of the cpu.
1623 for_each_present_cpu(cpu) {
1624 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
1625 int cpustate = st->state;
1627 if (cpustate < state)
1628 continue;
1630 ret = cpuhp_issue_call(cpu, state, true, NULL);
1631 if (ret) {
1632 if (teardown)
1633 cpuhp_rollback_install(cpu, state, NULL);
1634 cpuhp_store_callbacks(state, NULL, NULL, NULL, false);
1635 goto out;
1638 out:
1639 mutex_unlock(&cpuhp_state_mutex);
1641 * If the requested state is CPUHP_AP_ONLINE_DYN, return the
1642 * dynamically allocated state in case of success.
1644 if (!ret && dynstate)
1645 return state;
1646 return ret;
1648 EXPORT_SYMBOL(__cpuhp_setup_state_cpuslocked);
1650 int __cpuhp_setup_state(enum cpuhp_state state,
1651 const char *name, bool invoke,
1652 int (*startup)(unsigned int cpu),
1653 int (*teardown)(unsigned int cpu),
1654 bool multi_instance)
1656 int ret;
1658 cpus_read_lock();
1659 ret = __cpuhp_setup_state_cpuslocked(state, name, invoke, startup,
1660 teardown, multi_instance);
1661 cpus_read_unlock();
1662 return ret;
1664 EXPORT_SYMBOL(__cpuhp_setup_state);
1666 int __cpuhp_state_remove_instance(enum cpuhp_state state,
1667 struct hlist_node *node, bool invoke)
1669 struct cpuhp_step *sp = cpuhp_get_step(state);
1670 int cpu;
1672 BUG_ON(cpuhp_cb_check(state));
1674 if (!sp->multi_instance)
1675 return -EINVAL;
1677 cpus_read_lock();
1678 mutex_lock(&cpuhp_state_mutex);
1680 if (!invoke || !cpuhp_get_teardown_cb(state))
1681 goto remove;
1683 * Call the teardown callback for each present cpu depending
1684 * on the hotplug state of the cpu. This function is not
1685 * allowed to fail currently!
1687 for_each_present_cpu(cpu) {
1688 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
1689 int cpustate = st->state;
1691 if (cpustate >= state)
1692 cpuhp_issue_call(cpu, state, false, node);
1695 remove:
1696 hlist_del(node);
1697 mutex_unlock(&cpuhp_state_mutex);
1698 cpus_read_unlock();
1700 return 0;
1702 EXPORT_SYMBOL_GPL(__cpuhp_state_remove_instance);
1705 * __cpuhp_remove_state_cpuslocked - Remove the callbacks for an hotplug machine state
1706 * @state: The state to remove
1707 * @invoke: If true, the teardown function is invoked for cpus where
1708 * cpu state >= @state
1710 * The caller needs to hold cpus read locked while calling this function.
1711 * The teardown callback is currently not allowed to fail. Think
1712 * about module removal!
1714 void __cpuhp_remove_state_cpuslocked(enum cpuhp_state state, bool invoke)
1716 struct cpuhp_step *sp = cpuhp_get_step(state);
1717 int cpu;
1719 BUG_ON(cpuhp_cb_check(state));
1721 lockdep_assert_cpus_held();
1723 mutex_lock(&cpuhp_state_mutex);
1724 if (sp->multi_instance) {
1725 WARN(!hlist_empty(&sp->list),
1726 "Error: Removing state %d which has instances left.\n",
1727 state);
1728 goto remove;
1731 if (!invoke || !cpuhp_get_teardown_cb(state))
1732 goto remove;
1735 * Call the teardown callback for each present cpu depending
1736 * on the hotplug state of the cpu. This function is not
1737 * allowed to fail currently!
1739 for_each_present_cpu(cpu) {
1740 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu);
1741 int cpustate = st->state;
1743 if (cpustate >= state)
1744 cpuhp_issue_call(cpu, state, false, NULL);
1746 remove:
1747 cpuhp_store_callbacks(state, NULL, NULL, NULL, false);
1748 mutex_unlock(&cpuhp_state_mutex);
1750 EXPORT_SYMBOL(__cpuhp_remove_state_cpuslocked);
1752 void __cpuhp_remove_state(enum cpuhp_state state, bool invoke)
1754 cpus_read_lock();
1755 __cpuhp_remove_state_cpuslocked(state, invoke);
1756 cpus_read_unlock();
1758 EXPORT_SYMBOL(__cpuhp_remove_state);
1760 #if defined(CONFIG_SYSFS) && defined(CONFIG_HOTPLUG_CPU)
1761 static ssize_t show_cpuhp_state(struct device *dev,
1762 struct device_attribute *attr, char *buf)
1764 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
1766 return sprintf(buf, "%d\n", st->state);
1768 static DEVICE_ATTR(state, 0444, show_cpuhp_state, NULL);
1770 static ssize_t write_cpuhp_target(struct device *dev,
1771 struct device_attribute *attr,
1772 const char *buf, size_t count)
1774 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
1775 struct cpuhp_step *sp;
1776 int target, ret;
1778 ret = kstrtoint(buf, 10, &target);
1779 if (ret)
1780 return ret;
1782 #ifdef CONFIG_CPU_HOTPLUG_STATE_CONTROL
1783 if (target < CPUHP_OFFLINE || target > CPUHP_ONLINE)
1784 return -EINVAL;
1785 #else
1786 if (target != CPUHP_OFFLINE && target != CPUHP_ONLINE)
1787 return -EINVAL;
1788 #endif
1790 ret = lock_device_hotplug_sysfs();
1791 if (ret)
1792 return ret;
1794 mutex_lock(&cpuhp_state_mutex);
1795 sp = cpuhp_get_step(target);
1796 ret = !sp->name || sp->cant_stop ? -EINVAL : 0;
1797 mutex_unlock(&cpuhp_state_mutex);
1798 if (ret)
1799 goto out;
1801 if (st->state < target)
1802 ret = do_cpu_up(dev->id, target);
1803 else
1804 ret = do_cpu_down(dev->id, target);
1805 out:
1806 unlock_device_hotplug();
1807 return ret ? ret : count;
1810 static ssize_t show_cpuhp_target(struct device *dev,
1811 struct device_attribute *attr, char *buf)
1813 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
1815 return sprintf(buf, "%d\n", st->target);
1817 static DEVICE_ATTR(target, 0644, show_cpuhp_target, write_cpuhp_target);
1820 static ssize_t write_cpuhp_fail(struct device *dev,
1821 struct device_attribute *attr,
1822 const char *buf, size_t count)
1824 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
1825 struct cpuhp_step *sp;
1826 int fail, ret;
1828 ret = kstrtoint(buf, 10, &fail);
1829 if (ret)
1830 return ret;
1833 * Cannot fail STARTING/DYING callbacks.
1835 if (cpuhp_is_atomic_state(fail))
1836 return -EINVAL;
1839 * Cannot fail anything that doesn't have callbacks.
1841 mutex_lock(&cpuhp_state_mutex);
1842 sp = cpuhp_get_step(fail);
1843 if (!sp->startup.single && !sp->teardown.single)
1844 ret = -EINVAL;
1845 mutex_unlock(&cpuhp_state_mutex);
1846 if (ret)
1847 return ret;
1849 st->fail = fail;
1851 return count;
1854 static ssize_t show_cpuhp_fail(struct device *dev,
1855 struct device_attribute *attr, char *buf)
1857 struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, dev->id);
1859 return sprintf(buf, "%d\n", st->fail);
1862 static DEVICE_ATTR(fail, 0644, show_cpuhp_fail, write_cpuhp_fail);
1864 static struct attribute *cpuhp_cpu_attrs[] = {
1865 &dev_attr_state.attr,
1866 &dev_attr_target.attr,
1867 &dev_attr_fail.attr,
1868 NULL
1871 static const struct attribute_group cpuhp_cpu_attr_group = {
1872 .attrs = cpuhp_cpu_attrs,
1873 .name = "hotplug",
1874 NULL
1877 static ssize_t show_cpuhp_states(struct device *dev,
1878 struct device_attribute *attr, char *buf)
1880 ssize_t cur, res = 0;
1881 int i;
1883 mutex_lock(&cpuhp_state_mutex);
1884 for (i = CPUHP_OFFLINE; i <= CPUHP_ONLINE; i++) {
1885 struct cpuhp_step *sp = cpuhp_get_step(i);
1887 if (sp->name) {
1888 cur = sprintf(buf, "%3d: %s\n", i, sp->name);
1889 buf += cur;
1890 res += cur;
1893 mutex_unlock(&cpuhp_state_mutex);
1894 return res;
1896 static DEVICE_ATTR(states, 0444, show_cpuhp_states, NULL);
1898 static struct attribute *cpuhp_cpu_root_attrs[] = {
1899 &dev_attr_states.attr,
1900 NULL
1903 static const struct attribute_group cpuhp_cpu_root_attr_group = {
1904 .attrs = cpuhp_cpu_root_attrs,
1905 .name = "hotplug",
1906 NULL
1909 static int __init cpuhp_sysfs_init(void)
1911 int cpu, ret;
1913 ret = sysfs_create_group(&cpu_subsys.dev_root->kobj,
1914 &cpuhp_cpu_root_attr_group);
1915 if (ret)
1916 return ret;
1918 for_each_possible_cpu(cpu) {
1919 struct device *dev = get_cpu_device(cpu);
1921 if (!dev)
1922 continue;
1923 ret = sysfs_create_group(&dev->kobj, &cpuhp_cpu_attr_group);
1924 if (ret)
1925 return ret;
1927 return 0;
1929 device_initcall(cpuhp_sysfs_init);
1930 #endif
1933 * cpu_bit_bitmap[] is a special, "compressed" data structure that
1934 * represents all NR_CPUS bits binary values of 1<<nr.
1936 * It is used by cpumask_of() to get a constant address to a CPU
1937 * mask value that has a single bit set only.
1940 /* cpu_bit_bitmap[0] is empty - so we can back into it */
1941 #define MASK_DECLARE_1(x) [x+1][0] = (1UL << (x))
1942 #define MASK_DECLARE_2(x) MASK_DECLARE_1(x), MASK_DECLARE_1(x+1)
1943 #define MASK_DECLARE_4(x) MASK_DECLARE_2(x), MASK_DECLARE_2(x+2)
1944 #define MASK_DECLARE_8(x) MASK_DECLARE_4(x), MASK_DECLARE_4(x+4)
1946 const unsigned long cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)] = {
1948 MASK_DECLARE_8(0), MASK_DECLARE_8(8),
1949 MASK_DECLARE_8(16), MASK_DECLARE_8(24),
1950 #if BITS_PER_LONG > 32
1951 MASK_DECLARE_8(32), MASK_DECLARE_8(40),
1952 MASK_DECLARE_8(48), MASK_DECLARE_8(56),
1953 #endif
1955 EXPORT_SYMBOL_GPL(cpu_bit_bitmap);
1957 const DECLARE_BITMAP(cpu_all_bits, NR_CPUS) = CPU_BITS_ALL;
1958 EXPORT_SYMBOL(cpu_all_bits);
1960 #ifdef CONFIG_INIT_ALL_POSSIBLE
1961 struct cpumask __cpu_possible_mask __read_mostly
1962 = {CPU_BITS_ALL};
1963 #else
1964 struct cpumask __cpu_possible_mask __read_mostly;
1965 #endif
1966 EXPORT_SYMBOL(__cpu_possible_mask);
1968 struct cpumask __cpu_online_mask __read_mostly;
1969 EXPORT_SYMBOL(__cpu_online_mask);
1971 struct cpumask __cpu_present_mask __read_mostly;
1972 EXPORT_SYMBOL(__cpu_present_mask);
1974 struct cpumask __cpu_active_mask __read_mostly;
1975 EXPORT_SYMBOL(__cpu_active_mask);
1977 void init_cpu_present(const struct cpumask *src)
1979 cpumask_copy(&__cpu_present_mask, src);
1982 void init_cpu_possible(const struct cpumask *src)
1984 cpumask_copy(&__cpu_possible_mask, src);
1987 void init_cpu_online(const struct cpumask *src)
1989 cpumask_copy(&__cpu_online_mask, src);
1993 * Activate the first processor.
1995 void __init boot_cpu_init(void)
1997 int cpu = smp_processor_id();
1999 /* Mark the boot cpu "present", "online" etc for SMP and UP case */
2000 set_cpu_online(cpu, true);
2001 set_cpu_active(cpu, true);
2002 set_cpu_present(cpu, true);
2003 set_cpu_possible(cpu, true);
2005 #ifdef CONFIG_SMP
2006 __boot_cpu_id = cpu;
2007 #endif
2011 * Must be called _AFTER_ setting up the per_cpu areas
2013 void __init boot_cpu_state_init(void)
2015 per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE;