Linux 4.1.18
[linux/fpc-iii.git] / arch / powerpc / boot / dts / kmeter1.dts
blob983aee185793282529c7fcd050808d6c731104f0
1 /*
2  * Keymile KMETER1 Device Tree Source
3  *
4  * 2008-2011 DENX Software Engineering GmbH
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  */
12 /dts-v1/;
14 / {
15         model = "KMETER1";
16         compatible = "keymile,KMETER1";
17         #address-cells = <1>;
18         #size-cells = <1>;
20         aliases {
21                 ethernet0 = &enet_piggy2;
22                 ethernet1 = &enet_estar1;
23                 ethernet2 = &enet_estar2;
24                 ethernet3 = &enet_eth1;
25                 ethernet4 = &enet_eth2;
26                 ethernet5 = &enet_eth3;
27                 ethernet6 = &enet_eth4;
28                 serial0 = &serial0;
29         };
31         cpus {
32                 #address-cells = <1>;
33                 #size-cells = <0>;
35                 PowerPC,8360@0 {
36                         device_type = "cpu";
37                         reg = <0x0>;
38                         d-cache-line-size = <32>;       // 32 bytes
39                         i-cache-line-size = <32>;       // 32 bytes
40                         d-cache-size = <32768>;         // L1, 32K
41                         i-cache-size = <32768>;         // L1, 32K
42                         timebase-frequency = <0>;       /* Filled in by U-Boot */
43                         bus-frequency = <0>;    /* Filled in by U-Boot */
44                         clock-frequency = <0>;  /* Filled in by U-Boot */
45                 };
46         };
48         memory {
49                 device_type = "memory";
50                 reg = <0 0>;    /* Filled in by U-Boot */
51         };
53         soc8360@e0000000 {
54                 #address-cells = <1>;
55                 #size-cells = <1>;
56                 device_type = "soc";
57                 compatible = "fsl,mpc8360-immr", "simple-bus";
58                 ranges = <0x0 0xe0000000 0x00200000>;
59                 reg = <0xe0000000 0x00000200>;
60                 bus-frequency = <0>;    /* Filled in by U-Boot */
62                 pmc: power@b00 {
63                         compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
64                         reg = <0xb00 0x100 0xa00 0x100>;
65                         interrupts = <80 0x8>;
66                         interrupt-parent = <&ipic>;
67                 };
69                 i2c@3000 {
70                         #address-cells = <1>;
71                         #size-cells = <0>;
72                         cell-index = <0>;
73                         compatible = "fsl,mpc8313-i2c","fsl-i2c";
74                         reg = <0x3000 0x100>;
75                         interrupts = <14 0x8>;
76                         interrupt-parent = <&ipic>;
77                         clock-frequency = <400000>;
78                 };
80                 serial0: serial@4500 {
81                         cell-index = <0>;
82                         device_type = "serial";
83                         compatible = "fsl,ns16550", "ns16550";
84                         reg = <0x4500 0x100>;
85                         clock-frequency = <264000000>;
86                         interrupts = <9 0x8>;
87                         interrupt-parent = <&ipic>;
88                 };
90                 dma@82a8 {
91                         #address-cells = <1>;
92                         #size-cells = <1>;
93                         compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
94                         reg = <0x82a8 4>;
95                         ranges = <0 0x8100 0x1a8>;
96                         interrupt-parent = <&ipic>;
97                         interrupts = <71 8>;
98                         cell-index = <0>;
99                         dma-channel@0 {
100                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
101                                 reg = <0 0x80>;
102                                 interrupt-parent = <&ipic>;
103                                 interrupts = <71 8>;
104                         };
105                         dma-channel@80 {
106                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
107                                 reg = <0x80 0x80>;
108                                 interrupt-parent = <&ipic>;
109                                 interrupts = <71 8>;
110                         };
111                         dma-channel@100 {
112                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
113                                 reg = <0x100 0x80>;
114                                 interrupt-parent = <&ipic>;
115                                 interrupts = <71 8>;
116                         };
117                         dma-channel@180 {
118                                 compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
119                                 reg = <0x180 0x28>;
120                                 interrupt-parent = <&ipic>;
121                                 interrupts = <71 8>;
122                         };
123                 };
125                 ipic: pic@700 {
126                         #address-cells = <0>;
127                         #interrupt-cells = <2>;
128                         compatible = "fsl,pq2pro-pic", "fsl,ipic";
129                         interrupt-controller;
130                         reg = <0x700 0x100>;
131                 };
133                 par_io@1400 {
134                         #address-cells = <1>;
135                         #size-cells = <0>;
136                         reg = <0x1400 0x100>;
137                         compatible = "fsl,mpc8360-par_io";
138                         num-ports = <7>;
140                         qe_pio_c: gpio-controller@30 {
141                                 #gpio-cells = <2>;
142                                 compatible = "fsl,mpc8360-qe-pario-bank",
143                                              "fsl,mpc8323-qe-pario-bank";
144                                 reg = <0x1430 0x18>;
145                                 gpio-controller;
146                         };
147                         pio_ucc1: ucc_pin@0 {
148                                 reg = <0>;
150                                 pio-map = <
151                                         /* port pin dir open_drain assignment has_irq */
152                                         0   1  3  0  2  0       /* MDIO   */
153                                         0   2  1  0  1  0       /* MDC    */
155                                         0   3  1  0  1  0       /* TxD0   */
156                                         0   4  1  0  1  0       /* TxD1   */
157                                         0   5  1  0  1  0       /* TxD2   */
158                                         0   6  1  0  1  0       /* TxD3   */
159                                         0   9  2  0  1  0       /* RxD0   */
160                                         0  10  2  0  1  0       /* RxD1   */
161                                         0  11  2  0  1  0       /* RxD2   */
162                                         0  12  2  0  1  0       /* RxD3   */
163                                         0   7  1  0  1  0       /* TX_EN  */
164                                         0   8  1  0  1  0       /* TX_ER  */
165                                         0  15  2  0  1  0       /* RX_DV  */
166                                         0  16  2  0  1  0       /* RX_ER  */
167                                         0   0  2  0  1  0       /* RX_CLK */
168                                         2   9  1  0  3  0       /* GTX_CLK - CLK10 */
169                                         2   8  2  0  1  0       /* GTX125  - CLK9  */
170                                 >;
171                         };
173                         pio_ucc2: ucc_pin@1 {
174                                 reg = <1>;
176                                 pio-map = <
177                                         /* port pin dir open_drain assignment has_irq */
178                                         0   1  3  0  2  0       /* MDIO   */
179                                         0   2  1  0  1  0       /* MDC    */
181                                         0  17  1  0  1  0       /* TxD0   */
182                                         0  18  1  0  1  0       /* TxD1   */
183                                         0  19  1  0  1  0       /* TxD2   */
184                                         0  20  1  0  1  0       /* TxD3   */
185                                         0  23  2  0  1  0       /* RxD0   */
186                                         0  24  2  0  1  0       /* RxD1   */
187                                         0  25  2  0  1  0       /* RxD2   */
188                                         0  26  2  0  1  0       /* RxD3   */
189                                         0  21  1  0  1  0       /* TX_EN  */
190                                         0  22  1  0  1  0       /* TX_ER  */
191                                         0  29  2  0  1  0       /* RX_DV  */
192                                         0  30  2  0  1  0       /* RX_ER  */
193                                         0  31  2  0  1  0       /* RX_CLK */
194                                         2  2   1  0  2  0       /* GTX_CLK - CLK3  */
195                                         2  3   2  0  1  0       /* GTX125  - CLK4  */
196                                 >;
197                         };
199                         pio_ucc4: ucc_pin@3 {
200                                 reg = <3>;
202                                 pio-map = <
203                                         /* port pin dir open_drain assignment has_irq */
204                                         0   1  3  0  2  0       /* MDIO */
205                                         0   2  1  0  1  0       /* MDC  */
207                                         1  14  1  0  1  0       /* TxD0   (PB14, out, f1) */
208                                         1  15  1  0  1  0       /* TxD1   (PB15, out, f1) */
209                                         1  20  2  0  1  0       /* RxD0   (PB20, in,  f1) */
210                                         1  21  2  0  1  0       /* RxD1   (PB21, in,  f1) */
211                                         1  18  1  0  1  0       /* TX_EN  (PB18, out, f1) */
212                                         1  26  2  0  1  0       /* RX_DV  (PB26, in,  f1) */
213                                         1  27  2  0  1  0       /* RX_ER  (PB27, in,  f1) */
215                                         2  16  2  0  1  0       /* UCC4_RMII_CLK (CLK17) */
216                                 >;
217                         };
219                         pio_ucc5: ucc_pin@4 {
220                                 reg = <4>;
222                                 pio-map = <
223                                         /* port pin dir open_drain assignment has_irq */
224                                         0   1  3  0  2  0       /* MDIO */
225                                         0   2  1  0  1  0       /* MDC  */
227                                         3   0  1  0  1  0       /* TxD0  (PD0,  out, f1) */
228                                         3   1  1  0  1  0       /* TxD1  (PD1,  out, f1) */
229                                         3   6  2  0  1  0       /* RxD0  (PD6,   in, f1) */
230                                         3   7  2  0  1  0       /* RxD1  (PD7,   in, f1) */
231                                         3   4  1  0  1  0       /* TX_EN (PD4,  out, f1) */
232                                         3  12  2  0  1  0       /* RX_DV (PD12,  in, f1) */
233                                         3  13  2  0  1  0       /* RX_ER (PD13,  in, f1) */
234                                 >;
235                         };
237                         pio_ucc6: ucc_pin@5 {
238                                 reg = <5>;
240                                 pio-map = <
241                                         /* port pin dir open_drain assignment has_irq */
242                                         0   1  3  0  2  0       /* MDIO */
243                                         0   2  1  0  1  0       /* MDC  */
245                                         3  14  1  0  1  0       /* TxD0   (PD14, out, f1) */
246                                         3  15  1  0  1  0       /* TxD1   (PD15, out, f1) */
247                                         3  20  2  0  1  0       /* RxD0   (PD20, in,  f1) */
248                                         3  21  2  0  1  0       /* RxD1   (PD21, in,  f1) */
249                                         3  18  1  0  1  0       /* TX_EN  (PD18, out, f1) */
250                                         3  26  2  0  1  0       /* RX_DV  (PD26, in,  f1) */
251                                         3  27  2  0  1  0       /* RX_ER  (PD27, in,  f1) */
252                                 >;
253                         };
255                         pio_ucc7: ucc_pin@6 {
256                                 reg = <6>;
258                                 pio-map = <
259                                         /* port pin dir open_drain assignment has_irq */
260                                         0   1  3  0  2  0       /* MDIO */
261                                         0   2  1  0  1  0       /* MDC  */
263                                         4   0  1  0  1  0       /* TxD0   (PE0,  out, f1) */
264                                         4   1  1  0  1  0       /* TxD1   (PE1,  out, f1) */
265                                         4   6  2  0  1  0       /* RxD0   (PE6,   in, f1) */
266                                         4   7  2  0  1  0       /* RxD1   (PE7,   in, f1) */
267                                         4   4  1  0  1  0       /* TX_EN  (PE4,  out, f1) */
268                                         4  12  2  0  1  0       /* RX_DV  (PE12,  in, f1) */
269                                         4  13  2  0  1  0       /* RX_ER  (PE13,  in, f1) */
270                                 >;
271                         };
273                         pio_ucc8: ucc_pin@7 {
274                                 reg = <7>;
276                                 pio-map = <
277                                         /* port pin dir open_drain assignment has_irq */
278                                         0   1  3  0  2  0       /* MDIO */
279                                         0   2  1  0  1  0       /* MDC  */
281                                         4  14  1  0  2  0       /* TxD0   (PE14, out, f2) */
282                                         4  15  1  0  1  0       /* TxD1   (PE15, out, f1) */
283                                         4  20  2  0  1  0       /* RxD0   (PE20, in,  f1) */
284                                         4  21  2  0  1  0       /* RxD1   (PE21, in,  f1) */
285                                         4  18  1  0  1  0       /* TX_EN  (PE18, out, f1) */
286                                         4  26  2  0  1  0       /* RX_DV  (PE26, in,  f1) */
287                                         4  27  2  0  1  0       /* RX_ER  (PE27, in,  f1) */
289                                         2  15  2  0  1  0       /* UCCx_RMII_CLK (CLK16) */
290                                 >;
291                         };
293                 };
295                 qe@100000 {
296                         #address-cells = <1>;
297                         #size-cells = <1>;
298                         compatible = "fsl,qe";
299                         ranges = <0x0 0x100000 0x100000>;
300                         reg = <0x100000 0x480>;
301                         clock-frequency = <0>;  /* Filled in by U-Boot */
302                         brg-frequency = <0>;    /* Filled in by U-Boot */
303                         bus-frequency = <0>;    /* Filled in by U-Boot */
305                         muram@10000 {
306                                 #address-cells = <1>;
307                                 #size-cells = <1>;
308                                 compatible = "fsl,qe-muram", "fsl,cpm-muram";
309                                 ranges = <0x0 0x00010000 0x0000c000>;
311                                 data-only@0 {
312                                         compatible = "fsl,qe-muram-data",
313                                                      "fsl,cpm-muram-data";
314                                         reg = <0x0 0xc000>;
315                                 };
316                         };
318                         /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
319                         enet_estar1: ucc@2000 {
320                                 device_type = "network";
321                                 compatible = "ucc_geth";
322                                 cell-index = <1>;
323                                 reg = <0x2000 0x200>;
324                                 interrupts = <32>;
325                                 interrupt-parent = <&qeic>;
326                                 local-mac-address = [ 00 00 00 00 00 00 ];
327                                 rx-clock-name = "none";
328                                 tx-clock-name = "clk9";
329                                 phy-handle = <&phy_estar1>;
330                                 phy-connection-type = "rgmii-id";
331                                 pio-handle = <&pio_ucc1>;
332                         };
334                         /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
335                         enet_estar2: ucc@3000 {
336                                 device_type = "network";
337                                 compatible = "ucc_geth";
338                                 cell-index = <2>;
339                                 reg = <0x3000 0x200>;
340                                 interrupts = <33>;
341                                 interrupt-parent = <&qeic>;
342                                 local-mac-address = [ 00 00 00 00 00 00 ];
343                                 rx-clock-name = "none";
344                                 tx-clock-name = "clk4";
345                                 phy-handle = <&phy_estar2>;
346                                 phy-connection-type = "rgmii-id";
347                                 pio-handle = <&pio_ucc2>;
348                         };
350                         /* Piggy2 (UCC4, MDIO 0x00, RMII) */
351                         enet_piggy2: ucc@3200 {
352                                 device_type = "network";
353                                 compatible = "ucc_geth";
354                                 cell-index = <4>;
355                                 reg = <0x3200 0x200>;
356                                 interrupts = <35>;
357                                 interrupt-parent = <&qeic>;
358                                 local-mac-address = [ 00 00 00 00 00 00 ];
359                                 rx-clock-name = "none";
360                                 tx-clock-name = "clk17";
361                                 phy-handle = <&phy_piggy2>;
362                                 phy-connection-type = "rmii";
363                                 pio-handle = <&pio_ucc4>;
364                         };
366                         /* Eth-1 (UCC5, MDIO 0x08, RMII) */
367                         enet_eth1: ucc@2400 {
368                                 device_type = "network";
369                                 compatible = "ucc_geth";
370                                 cell-index = <5>;
371                                 reg = <0x2400 0x200>;
372                                 interrupts = <40>;
373                                 interrupt-parent = <&qeic>;
374                                 local-mac-address = [ 00 00 00 00 00 00 ];
375                                 rx-clock-name = "none";
376                                 tx-clock-name = "clk16";
377                                 phy-handle = <&phy_eth1>;
378                                 phy-connection-type = "rmii";
379                                 pio-handle = <&pio_ucc5>;
380                         };
382                         /* Eth-2 (UCC6, MDIO 0x09, RMII) */
383                         enet_eth2: ucc@3400 {
384                                 device_type = "network";
385                                 compatible = "ucc_geth";
386                                 cell-index = <6>;
387                                 reg = <0x3400 0x200>;
388                                 interrupts = <41>;
389                                 interrupt-parent = <&qeic>;
390                                 local-mac-address = [ 00 00 00 00 00 00 ];
391                                 rx-clock-name = "none";
392                                 tx-clock-name = "clk16";
393                                 phy-handle = <&phy_eth2>;
394                                 phy-connection-type = "rmii";
395                                 pio-handle = <&pio_ucc6>;
396                         };
398                         /* Eth-3 (UCC7, MDIO 0x0a, RMII) */
399                         enet_eth3: ucc@2600 {
400                                 device_type = "network";
401                                 compatible = "ucc_geth";
402                                 cell-index = <7>;
403                                 reg = <0x2600 0x200>;
404                                 interrupts = <42>;
405                                 interrupt-parent = <&qeic>;
406                                 local-mac-address = [ 00 00 00 00 00 00 ];
407                                 rx-clock-name = "none";
408                                 tx-clock-name = "clk16";
409                                 phy-handle = <&phy_eth3>;
410                                 phy-connection-type = "rmii";
411                                 pio-handle = <&pio_ucc7>;
412                         };
414                         /* Eth-4 (UCC8, MDIO 0x0b, RMII) */
415                         enet_eth4: ucc@3600 {
416                                 device_type = "network";
417                                 compatible = "ucc_geth";
418                                 cell-index = <8>;
419                                 reg = <0x3600 0x200>;
420                                 interrupts = <43>;
421                                 interrupt-parent = <&qeic>;
422                                 local-mac-address = [ 00 00 00 00 00 00 ];
423                                 rx-clock-name = "none";
424                                 tx-clock-name = "clk16";
425                                 phy-handle = <&phy_eth4>;
426                                 phy-connection-type = "rmii";
427                                 pio-handle = <&pio_ucc8>;
428                         };
430                         mdio@3320 {
431                                 #address-cells = <1>;
432                                 #size-cells = <0>;
433                                 reg = <0x3320 0x18>;
434                                 compatible = "fsl,ucc-mdio";
436                                 /* Piggy2 (UCC4, MDIO 0x00, RMII) */
437                                 phy_piggy2: ethernet-phy@00 {
438                                         reg = <0x0>;
439                                 };
441                                 /* Eth-1 (UCC5, MDIO 0x08, RMII) */
442                                 phy_eth1: ethernet-phy@08 {
443                                         reg = <0x08>;
444                                 };
446                                 /* Eth-2 (UCC6, MDIO 0x09, RMII) */
447                                 phy_eth2: ethernet-phy@09 {
448                                         reg = <0x09>;
449                                 };
451                                 /* Eth-3 (UCC7, MDIO 0x0a, RMII) */
452                                 phy_eth3: ethernet-phy@0a {
453                                         reg = <0x0a>;
454                                 };
456                                 /* Eth-4 (UCC8, MDIO 0x0b, RMII) */
457                                 phy_eth4: ethernet-phy@0b {
458                                         reg = <0x0b>;
459                                 };
461                                 /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
462                                 phy_estar1: ethernet-phy@10 {
463                                         interrupt-parent = <&ipic>;
464                                         interrupts = <17 0x8>;
465                                         reg = <0x10>;
466                                 };
468                                 /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
469                                 phy_estar2: ethernet-phy@11 {
470                                         interrupt-parent = <&ipic>;
471                                         interrupts = <18 0x8>;
472                                         reg = <0x11>;
473                                 };
474                         };
476                         qeic: interrupt-controller@80 {
477                                 interrupt-controller;
478                                 compatible = "fsl,qe-ic";
479                                 #address-cells = <0>;
480                                 #interrupt-cells = <1>;
481                                 reg = <0x80 0x80>;
482                                 big-endian;
483                                 interrupts = <
484                                         32 0x8
485                                         33 0x8
486                                         34 0x8
487                                         35 0x8
488                                         40 0x8
489                                         41 0x8
490                                         42 0x8
491                                         43 0x8
492                                 >;
493                                 interrupt-parent = <&ipic>;
494                         };
495                 };
496         };
498         localbus@e0005000 {
499                 #address-cells = <2>;
500                 #size-cells = <1>;
501                 compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
502                              "simple-bus";
503                 reg = <0xe0005000 0xd8>;
504                 ranges = <0 0 0xf0000000 0x04000000     /* LB 0 */
505                           1 0 0xe8000000 0x01000000     /* LB 1 */
506                           3 0 0xa0000000 0x10000000>;   /* LB 3 */
508                 flash@0,0 {
509                         compatible = "cfi-flash";
510                         reg = <0 0 0x04000000>;
511                         #address-cells = <1>;
512                         #size-cells = <1>;
513                         bank-width = <2>;
514                         partition@0 { /* 768KB */
515                                 label = "u-boot";
516                                 reg = <0 0xC0000>;
517                         };
518                         partition@c0000 { /* 128KB */
519                                 label = "env";
520                                 reg = <0xC0000 0x20000>;
521                         };
522                         partition@e0000 { /* 128KB */
523                                 label = "envred";
524                                 reg = <0xE0000 0x20000>;
525                         };
526                         partition@100000 { /* 64512KB */
527                                 label = "ubi0";
528                                 reg = <0x100000 0x3F00000>;
529                         };
530                 };
531         };