drm/omap: Fix error handling path in 'omap_dmm_probe()'

[linux/fpc-iii.git] / drivers / clk / bcm / clk-kona.c

/*
 * Copyright (C) 2013 Broadcom Corporation
 * Copyright 2013 Linaro Limited
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation version 2.
 *
 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
 * kind, whether express or implied; without even the implied warranty
 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include "clk-kona.h"

#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/clk.h>

/*
 * "Policies" affect the frequencies of bus clocks provided by a
 * CCU.  (I believe these polices are named "Deep Sleep", "Economy",
 * "Normal", and "Turbo".)  A lower policy number has lower power
 * consumption, and policy 2 is the default.
 */
#define CCU_POLICY_COUNT        4

#define CCU_ACCESS_PASSWORD      0xA5A500
#define CLK_GATE_DELAY_LOOP      2000

/* Bitfield operations */

/* Produces a mask of set bits covering a range of a 32-bit value */
static inline u32 bitfield_mask(u32 shift, u32 width)
{
        return ((1 << width) - 1) << shift;
}

/* Extract the value of a bitfield found within a given register value */
static inline u32 bitfield_extract(u32 reg_val, u32 shift, u32 width)
{
        return (reg_val & bitfield_mask(shift, width)) >> shift;
}

/* Replace the value of a bitfield found within a given register value */
static inline u32 bitfield_replace(u32 reg_val, u32 shift, u32 width, u32 val)
{
        u32 mask = bitfield_mask(shift, width);

        return (reg_val & ~mask) | (val << shift);
}

/* Divider and scaling helpers */

/* Convert a divider into the scaled divisor value it represents. */
static inline u64 scaled_div_value(struct bcm_clk_div *div, u32 reg_div)
{
        return (u64)reg_div + ((u64)1 << div->u.s.frac_width);
}

/*
 * Build a scaled divider value as close as possible to the
 * given whole part (div_value) and fractional part (expressed
 * in billionths).
 */
u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value, u32 billionths)
{
        u64 combined;

        BUG_ON(!div_value);
        BUG_ON(billionths >= BILLION);

        combined = (u64)div_value * BILLION + billionths;
        combined <<= div->u.s.frac_width;

        return DIV_ROUND_CLOSEST_ULL(combined, BILLION);
}

/* The scaled minimum divisor representable by a divider */
static inline u64
scaled_div_min(struct bcm_clk_div *div)
{
        if (divider_is_fixed(div))
                return (u64)div->u.fixed;

        return scaled_div_value(div, 0);
}

/* The scaled maximum divisor representable by a divider */
u64 scaled_div_max(struct bcm_clk_div *div)
{
        u32 reg_div;

        if (divider_is_fixed(div))
                return (u64)div->u.fixed;

        reg_div = ((u32)1 << div->u.s.width) - 1;

        return scaled_div_value(div, reg_div);
}

/*
 * Convert a scaled divisor into its divider representation as
 * stored in a divider register field.
 */
static inline u32
divider(struct bcm_clk_div *div, u64 scaled_div)
{
        BUG_ON(scaled_div < scaled_div_min(div));
        BUG_ON(scaled_div > scaled_div_max(div));

        return (u32)(scaled_div - ((u64)1 << div->u.s.frac_width));
}

/* Return a rate scaled for use when dividing by a scaled divisor. */
static inline u64
scale_rate(struct bcm_clk_div *div, u32 rate)
{
        if (divider_is_fixed(div))
                return (u64)rate;

        return (u64)rate << div->u.s.frac_width;
}

/* CCU access */

/* Read a 32-bit register value from a CCU's address space. */
static inline u32 __ccu_read(struct ccu_data *ccu, u32 reg_offset)
{
        return readl(ccu->base + reg_offset);
}

/* Write a 32-bit register value into a CCU's address space. */
static inline void
__ccu_write(struct ccu_data *ccu, u32 reg_offset, u32 reg_val)
{
        writel(reg_val, ccu->base + reg_offset);
}

static inline unsigned long ccu_lock(struct ccu_data *ccu)
{
        unsigned long flags;

        spin_lock_irqsave(&ccu->lock, flags);

        return flags;
}
static inline void ccu_unlock(struct ccu_data *ccu, unsigned long flags)
{
        spin_unlock_irqrestore(&ccu->lock, flags);
}

/*
 * Enable/disable write access to CCU protected registers.  The
 * WR_ACCESS register for all CCUs is at offset 0.
 */
static inline void __ccu_write_enable(struct ccu_data *ccu)
{
        if (ccu->write_enabled) {
                pr_err("%s: access already enabled for %s\n", __func__,
                        ccu->name);
                return;
        }
        ccu->write_enabled = true;
        __ccu_write(ccu, 0, CCU_ACCESS_PASSWORD | 1);
}

static inline void __ccu_write_disable(struct ccu_data *ccu)
{
        if (!ccu->write_enabled) {
                pr_err("%s: access wasn't enabled for %s\n", __func__,
                        ccu->name);
                return;
        }

        __ccu_write(ccu, 0, CCU_ACCESS_PASSWORD);
        ccu->write_enabled = false;
}

/*
 * Poll a register in a CCU's address space, returning when the
 * specified bit in that register's value is set (or clear).  Delay
 * a microsecond after each read of the register.  Returns true if
 * successful, or false if we gave up trying.
 *
 * Caller must ensure the CCU lock is held.
 */
static inline bool
__ccu_wait_bit(struct ccu_data *ccu, u32 reg_offset, u32 bit, bool want)
{
        unsigned int tries;
        u32 bit_mask = 1 << bit;

        for (tries = 0; tries < CLK_GATE_DELAY_LOOP; tries++) {
                u32 val;
                bool bit_val;

                val = __ccu_read(ccu, reg_offset);
                bit_val = (val & bit_mask) != 0;
                if (bit_val == want)
                        return true;
                udelay(1);
        }
        pr_warn("%s: %s/0x%04x bit %u was never %s\n", __func__,
                ccu->name, reg_offset, bit, want ? "set" : "clear");

        return false;
}

/* Policy operations */

static bool __ccu_policy_engine_start(struct ccu_data *ccu, bool sync)
{
        struct bcm_policy_ctl *control = &ccu->policy.control;
        u32 offset;
        u32 go_bit;
        u32 mask;
        bool ret;

        /* If we don't need to control policy for this CCU, we're done. */
        if (!policy_ctl_exists(control))
                return true;

        offset = control->offset;
        go_bit = control->go_bit;

        /* Ensure we're not busy before we start */
        ret = __ccu_wait_bit(ccu, offset, go_bit, false);
        if (!ret) {
                pr_err("%s: ccu %s policy engine wouldn't go idle\n",
                        __func__, ccu->name);
                return false;
        }

        /*
         * If it's a synchronous request, we'll wait for the voltage
         * and frequency of the active load to stabilize before
         * returning.  To do this we select the active load by
         * setting the ATL bit.
         *
         * An asynchronous request instead ramps the voltage in the
         * background, and when that process stabilizes, the target
         * load is copied to the active load and the CCU frequency
         * is switched.  We do this by selecting the target load
         * (ATL bit clear) and setting the request auto-copy (AC bit
         * set).
         *
         * Note, we do NOT read-modify-write this register.
         */
        mask = (u32)1 << go_bit;
        if (sync)
                mask |= 1 << control->atl_bit;
        else
                mask |= 1 << control->ac_bit;
        __ccu_write(ccu, offset, mask);

        /* Wait for indication that operation is complete. */
        ret = __ccu_wait_bit(ccu, offset, go_bit, false);
        if (!ret)
                pr_err("%s: ccu %s policy engine never started\n",
                        __func__, ccu->name);

        return ret;
}

static bool __ccu_policy_engine_stop(struct ccu_data *ccu)
{
        struct bcm_lvm_en *enable = &ccu->policy.enable;
        u32 offset;
        u32 enable_bit;
        bool ret;

        /* If we don't need to control policy for this CCU, we're done. */
        if (!policy_lvm_en_exists(enable))
                return true;

        /* Ensure we're not busy before we start */
        offset = enable->offset;
        enable_bit = enable->bit;
        ret = __ccu_wait_bit(ccu, offset, enable_bit, false);
        if (!ret) {
                pr_err("%s: ccu %s policy engine already stopped\n",
                        __func__, ccu->name);
                return false;
        }

        /* Now set the bit to stop the engine (NO read-modify-write) */
        __ccu_write(ccu, offset, (u32)1 << enable_bit);

        /* Wait for indication that it has stopped. */
        ret = __ccu_wait_bit(ccu, offset, enable_bit, false);
        if (!ret)
                pr_err("%s: ccu %s policy engine never stopped\n",
                        __func__, ccu->name);

        return ret;
}

/*
 * A CCU has four operating conditions ("policies"), and some clocks
 * can be disabled or enabled based on which policy is currently in
 * effect.  Such clocks have a bit in a "policy mask" register for
 * each policy indicating whether the clock is enabled for that
 * policy or not.  The bit position for a clock is the same for all
 * four registers, and the 32-bit registers are at consecutive
 * addresses.
 */
static bool policy_init(struct ccu_data *ccu, struct bcm_clk_policy *policy)
{
        u32 offset;
        u32 mask;
        int i;
        bool ret;

        if (!policy_exists(policy))
                return true;

        /*
         * We need to stop the CCU policy engine to allow update
         * of our policy bits.
         */
        if (!__ccu_policy_engine_stop(ccu)) {
                pr_err("%s: unable to stop CCU %s policy engine\n",
                        __func__, ccu->name);
                return false;
        }

        /*
         * For now, if a clock defines its policy bit we just mark
         * it "enabled" for all four policies.
         */
        offset = policy->offset;
        mask = (u32)1 << policy->bit;
        for (i = 0; i < CCU_POLICY_COUNT; i++) {
                u32 reg_val;

                reg_val = __ccu_read(ccu, offset);
                reg_val |= mask;
                __ccu_write(ccu, offset, reg_val);
                offset += sizeof(u32);
        }

        /* We're done updating; fire up the policy engine again. */
        ret = __ccu_policy_engine_start(ccu, true);
        if (!ret)
                pr_err("%s: unable to restart CCU %s policy engine\n",
                        __func__, ccu->name);

        return ret;
}

/* Gate operations */

/* Determine whether a clock is gated.  CCU lock must be held.  */
static bool
__is_clk_gate_enabled(struct ccu_data *ccu, struct bcm_clk_gate *gate)
{
        u32 bit_mask;
        u32 reg_val;

        /* If there is no gate we can assume it's enabled. */
        if (!gate_exists(gate))
                return true;

        bit_mask = 1 << gate->status_bit;
        reg_val = __ccu_read(ccu, gate->offset);

        return (reg_val & bit_mask) != 0;
}

/* Determine whether a clock is gated. */
static bool
is_clk_gate_enabled(struct ccu_data *ccu, struct bcm_clk_gate *gate)
{
        long flags;
        bool ret;

        /* Avoid taking the lock if we can */
        if (!gate_exists(gate))
                return true;

        flags = ccu_lock(ccu);
        ret = __is_clk_gate_enabled(ccu, gate);
        ccu_unlock(ccu, flags);

        return ret;
}

/*
 * Commit our desired gate state to the hardware.
 * Returns true if successful, false otherwise.
 */
static bool
__gate_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate)
{
        u32 reg_val;
        u32 mask;
        bool enabled = false;

        BUG_ON(!gate_exists(gate));
        if (!gate_is_sw_controllable(gate))
                return true;            /* Nothing we can change */

        reg_val = __ccu_read(ccu, gate->offset);

        /* For a hardware/software gate, set which is in control */
        if (gate_is_hw_controllable(gate)) {
                mask = (u32)1 << gate->hw_sw_sel_bit;
                if (gate_is_sw_managed(gate))
                        reg_val |= mask;
                else
                        reg_val &= ~mask;
        }

        /*
         * If software is in control, enable or disable the gate.
         * If hardware is, clear the enabled bit for good measure.
         * If a software controlled gate can't be disabled, we're
         * required to write a 0 into the enable bit (but the gate
         * will be enabled).
         */
        mask = (u32)1 << gate->en_bit;
        if (gate_is_sw_managed(gate) && (enabled = gate_is_enabled(gate)) &&
                        !gate_is_no_disable(gate))
                reg_val |= mask;
        else
                reg_val &= ~mask;

        __ccu_write(ccu, gate->offset, reg_val);

        /* For a hardware controlled gate, we're done */
        if (!gate_is_sw_managed(gate))
                return true;

        /* Otherwise wait for the gate to be in desired state */
        return __ccu_wait_bit(ccu, gate->offset, gate->status_bit, enabled);
}

/*
 * Initialize a gate.  Our desired state (hardware/software select,
 * and if software, its enable state) is committed to hardware
 * without the usual checks to see if it's already set up that way.
 * Returns true if successful, false otherwise.
 */
static bool gate_init(struct ccu_data *ccu, struct bcm_clk_gate *gate)
{
        if (!gate_exists(gate))
                return true;
        return __gate_commit(ccu, gate);
}

/*
 * Set a gate to enabled or disabled state.  Does nothing if the
 * gate is not currently under software control, or if it is already
 * in the requested state.  Returns true if successful, false
 * otherwise.  CCU lock must be held.
 */
static bool
__clk_gate(struct ccu_data *ccu, struct bcm_clk_gate *gate, bool enable)
{
        bool ret;

        if (!gate_exists(gate) || !gate_is_sw_managed(gate))
                return true;    /* Nothing to do */

        if (!enable && gate_is_no_disable(gate)) {
                pr_warn("%s: invalid gate disable request (ignoring)\n",
                        __func__);
                return true;
        }

        if (enable == gate_is_enabled(gate))
                return true;    /* No change */

        gate_flip_enabled(gate);
        ret = __gate_commit(ccu, gate);
        if (!ret)
                gate_flip_enabled(gate);        /* Revert the change */

        return ret;
}

/* Enable or disable a gate.  Returns 0 if successful, -EIO otherwise */
static int clk_gate(struct ccu_data *ccu, const char *name,
                        struct bcm_clk_gate *gate, bool enable)
{
        unsigned long flags;
        bool success;

        /*
         * Avoid taking the lock if we can.  We quietly ignore
         * requests to change state that don't make sense.
         */
        if (!gate_exists(gate) || !gate_is_sw_managed(gate))
                return 0;
        if (!enable && gate_is_no_disable(gate))
                return 0;

        flags = ccu_lock(ccu);
        __ccu_write_enable(ccu);

        success = __clk_gate(ccu, gate, enable);

        __ccu_write_disable(ccu);
        ccu_unlock(ccu, flags);

        if (success)
                return 0;

        pr_err("%s: failed to %s gate for %s\n", __func__,
                enable ? "enable" : "disable", name);

        return -EIO;
}

/* Hysteresis operations */

/*
 * If a clock gate requires a turn-off delay it will have
 * "hysteresis" register bits defined.  The first, if set, enables
 * the delay; and if enabled, the second bit determines whether the
 * delay is "low" or "high" (1 means high).  For now, if it's
 * defined for a clock, we set it.
 */
static bool hyst_init(struct ccu_data *ccu, struct bcm_clk_hyst *hyst)
{
        u32 offset;
        u32 reg_val;
        u32 mask;

        if (!hyst_exists(hyst))
                return true;

        offset = hyst->offset;
        mask = (u32)1 << hyst->en_bit;
        mask |= (u32)1 << hyst->val_bit;

        reg_val = __ccu_read(ccu, offset);
        reg_val |= mask;
        __ccu_write(ccu, offset, reg_val);

        return true;
}

/* Trigger operations */

/*
 * Caller must ensure CCU lock is held and access is enabled.
 * Returns true if successful, false otherwise.
 */
static bool __clk_trigger(struct ccu_data *ccu, struct bcm_clk_trig *trig)
{
        /* Trigger the clock and wait for it to finish */
        __ccu_write(ccu, trig->offset, 1 << trig->bit);

        return __ccu_wait_bit(ccu, trig->offset, trig->bit, false);
}

/* Divider operations */

/* Read a divider value and return the scaled divisor it represents. */
static u64 divider_read_scaled(struct ccu_data *ccu, struct bcm_clk_div *div)
{
        unsigned long flags;
        u32 reg_val;
        u32 reg_div;

        if (divider_is_fixed(div))
                return (u64)div->u.fixed;

        flags = ccu_lock(ccu);
        reg_val = __ccu_read(ccu, div->u.s.offset);
        ccu_unlock(ccu, flags);

        /* Extract the full divider field from the register value */
        reg_div = bitfield_extract(reg_val, div->u.s.shift, div->u.s.width);

        /* Return the scaled divisor value it represents */
        return scaled_div_value(div, reg_div);
}

/*
 * Convert a divider's scaled divisor value into its recorded form
 * and commit it into the hardware divider register.
 *
 * Returns 0 on success.  Returns -EINVAL for invalid arguments.
 * Returns -ENXIO if gating failed, and -EIO if a trigger failed.
 */
static int __div_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate,
                        struct bcm_clk_div *div, struct bcm_clk_trig *trig)
{
        bool enabled;
        u32 reg_div;
        u32 reg_val;
        int ret = 0;

        BUG_ON(divider_is_fixed(div));

        /*
         * If we're just initializing the divider, and no initial
         * state was defined in the device tree, we just find out
         * what its current value is rather than updating it.
         */
        if (div->u.s.scaled_div == BAD_SCALED_DIV_VALUE) {
                reg_val = __ccu_read(ccu, div->u.s.offset);
                reg_div = bitfield_extract(reg_val, div->u.s.shift,
                                                div->u.s.width);
                div->u.s.scaled_div = scaled_div_value(div, reg_div);

                return 0;
        }

        /* Convert the scaled divisor to the value we need to record */
        reg_div = divider(div, div->u.s.scaled_div);

        /* Clock needs to be enabled before changing the rate */
        enabled = __is_clk_gate_enabled(ccu, gate);
        if (!enabled && !__clk_gate(ccu, gate, true)) {
                ret = -ENXIO;
                goto out;
        }

        /* Replace the divider value and record the result */
        reg_val = __ccu_read(ccu, div->u.s.offset);
        reg_val = bitfield_replace(reg_val, div->u.s.shift, div->u.s.width,
                                        reg_div);
        __ccu_write(ccu, div->u.s.offset, reg_val);

        /* If the trigger fails we still want to disable the gate */
        if (!__clk_trigger(ccu, trig))
                ret = -EIO;

        /* Disable the clock again if it was disabled to begin with */
        if (!enabled && !__clk_gate(ccu, gate, false))
                ret = ret ? ret : -ENXIO;       /* return first error */
out:
        return ret;
}

/*
 * Initialize a divider by committing our desired state to hardware
 * without the usual checks to see if it's already set up that way.
 * Returns true if successful, false otherwise.
 */
static bool div_init(struct ccu_data *ccu, struct bcm_clk_gate *gate,
                        struct bcm_clk_div *div, struct bcm_clk_trig *trig)
{
        if (!divider_exists(div) || divider_is_fixed(div))
                return true;
        return !__div_commit(ccu, gate, div, trig);
}

static int divider_write(struct ccu_data *ccu, struct bcm_clk_gate *gate,
                        struct bcm_clk_div *div, struct bcm_clk_trig *trig,
                        u64 scaled_div)
{
        unsigned long flags;
        u64 previous;
        int ret;

        BUG_ON(divider_is_fixed(div));

        previous = div->u.s.scaled_div;
        if (previous == scaled_div)
                return 0;       /* No change */

        div->u.s.scaled_div = scaled_div;

        flags = ccu_lock(ccu);
        __ccu_write_enable(ccu);

        ret = __div_commit(ccu, gate, div, trig);

        __ccu_write_disable(ccu);
        ccu_unlock(ccu, flags);

        if (ret)
                div->u.s.scaled_div = previous;         /* Revert the change */

        return ret;

}

/* Common clock rate helpers */

/*
 * Implement the common clock framework recalc_rate method, taking
 * into account a divider and an optional pre-divider.  The
 * pre-divider register pointer may be NULL.
 */
static unsigned long clk_recalc_rate(struct ccu_data *ccu,
                        struct bcm_clk_div *div, struct bcm_clk_div *pre_div,
                        unsigned long parent_rate)
{
        u64 scaled_parent_rate;
        u64 scaled_div;
        u64 result;

        if (!divider_exists(div))
                return parent_rate;

        if (parent_rate > (unsigned long)LONG_MAX)
                return 0;       /* actually this would be a caller bug */

        /*
         * If there is a pre-divider, divide the scaled parent rate
         * by the pre-divider value first.  In this case--to improve
         * accuracy--scale the parent rate by *both* the pre-divider
         * value and the divider before actually computing the
         * result of the pre-divider.
         *
         * If there's only one divider, just scale the parent rate.
         */
        if (pre_div && divider_exists(pre_div)) {
                u64 scaled_rate;

                scaled_rate = scale_rate(pre_div, parent_rate);
                scaled_rate = scale_rate(div, scaled_rate);
                scaled_div = divider_read_scaled(ccu, pre_div);
                scaled_parent_rate = DIV_ROUND_CLOSEST_ULL(scaled_rate,
                                                        scaled_div);
        } else  {
                scaled_parent_rate = scale_rate(div, parent_rate);
        }

        /*
         * Get the scaled divisor value, and divide the scaled
         * parent rate by that to determine this clock's resulting
         * rate.
         */
        scaled_div = divider_read_scaled(ccu, div);
        result = DIV_ROUND_CLOSEST_ULL(scaled_parent_rate, scaled_div);

        return (unsigned long)result;
}

/*
 * Compute the output rate produced when a given parent rate is fed
 * into two dividers.  The pre-divider can be NULL, and even if it's
 * non-null it may be nonexistent.  It's also OK for the divider to
 * be nonexistent, and in that case the pre-divider is also ignored.
 *
 * If scaled_div is non-null, it is used to return the scaled divisor
 * value used by the (downstream) divider to produce that rate.
 */
static long round_rate(struct ccu_data *ccu, struct bcm_clk_div *div,
                                struct bcm_clk_div *pre_div,
                                unsigned long rate, unsigned long parent_rate,
                                u64 *scaled_div)
{
        u64 scaled_parent_rate;
        u64 min_scaled_div;
        u64 max_scaled_div;
        u64 best_scaled_div;
        u64 result;

        BUG_ON(!divider_exists(div));
        BUG_ON(!rate);
        BUG_ON(parent_rate > (u64)LONG_MAX);

        /*
         * If there is a pre-divider, divide the scaled parent rate
         * by the pre-divider value first.  In this case--to improve
         * accuracy--scale the parent rate by *both* the pre-divider
         * value and the divider before actually computing the
         * result of the pre-divider.
         *
         * If there's only one divider, just scale the parent rate.
         *
         * For simplicity we treat the pre-divider as fixed (for now).
         */
        if (divider_exists(pre_div)) {
                u64 scaled_rate;
                u64 scaled_pre_div;

                scaled_rate = scale_rate(pre_div, parent_rate);
                scaled_rate = scale_rate(div, scaled_rate);
                scaled_pre_div = divider_read_scaled(ccu, pre_div);
                scaled_parent_rate = DIV_ROUND_CLOSEST_ULL(scaled_rate,
                                                        scaled_pre_div);
        } else {
                scaled_parent_rate = scale_rate(div, parent_rate);
        }

        /*
         * Compute the best possible divider and ensure it is in
         * range.  A fixed divider can't be changed, so just report
         * the best we can do.
         */
        if (!divider_is_fixed(div)) {
                best_scaled_div = DIV_ROUND_CLOSEST_ULL(scaled_parent_rate,
                                                        rate);
                min_scaled_div = scaled_div_min(div);
                max_scaled_div = scaled_div_max(div);
                if (best_scaled_div > max_scaled_div)
                        best_scaled_div = max_scaled_div;
                else if (best_scaled_div < min_scaled_div)
                        best_scaled_div = min_scaled_div;
        } else {
                best_scaled_div = divider_read_scaled(ccu, div);
        }

        /* OK, figure out the resulting rate */
        result = DIV_ROUND_CLOSEST_ULL(scaled_parent_rate, best_scaled_div);

        if (scaled_div)
                *scaled_div = best_scaled_div;

        return (long)result;
}

/* Common clock parent helpers */

/*
 * For a given parent selector (register field) value, find the
 * index into a selector's parent_sel array that contains it.
 * Returns the index, or BAD_CLK_INDEX if it's not found.
 */
static u8 parent_index(struct bcm_clk_sel *sel, u8 parent_sel)
{
        u8 i;

        BUG_ON(sel->parent_count > (u32)U8_MAX);
        for (i = 0; i < sel->parent_count; i++)
                if (sel->parent_sel[i] == parent_sel)
                        return i;
        return BAD_CLK_INDEX;
}

/*
 * Fetch the current value of the selector, and translate that into
 * its corresponding index in the parent array we registered with
 * the clock framework.
 *
 * Returns parent array index that corresponds with the value found,
 * or BAD_CLK_INDEX if the found value is out of range.
 */
static u8 selector_read_index(struct ccu_data *ccu, struct bcm_clk_sel *sel)
{
        unsigned long flags;
        u32 reg_val;
        u32 parent_sel;
        u8 index;

        /* If there's no selector, there's only one parent */
        if (!selector_exists(sel))
                return 0;

        /* Get the value in the selector register */
        flags = ccu_lock(ccu);
        reg_val = __ccu_read(ccu, sel->offset);
        ccu_unlock(ccu, flags);

        parent_sel = bitfield_extract(reg_val, sel->shift, sel->width);

        /* Look up that selector's parent array index and return it */
        index = parent_index(sel, parent_sel);
        if (index == BAD_CLK_INDEX)
                pr_err("%s: out-of-range parent selector %u (%s 0x%04x)\n",
                        __func__, parent_sel, ccu->name, sel->offset);

        return index;
}

/*
 * Commit our desired selector value to the hardware.
 *
 * Returns 0 on success.  Returns -EINVAL for invalid arguments.
 * Returns -ENXIO if gating failed, and -EIO if a trigger failed.
 */
static int
__sel_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate,
                        struct bcm_clk_sel *sel, struct bcm_clk_trig *trig)
{
        u32 parent_sel;
        u32 reg_val;
        bool enabled;
        int ret = 0;

        BUG_ON(!selector_exists(sel));

        /*
         * If we're just initializing the selector, and no initial
         * state was defined in the device tree, we just find out
         * what its current value is rather than updating it.
         */
        if (sel->clk_index == BAD_CLK_INDEX) {
                u8 index;

                reg_val = __ccu_read(ccu, sel->offset);
                parent_sel = bitfield_extract(reg_val, sel->shift, sel->width);
                index = parent_index(sel, parent_sel);
                if (index == BAD_CLK_INDEX)
                        return -EINVAL;
                sel->clk_index = index;

                return 0;
        }

        BUG_ON((u32)sel->clk_index >= sel->parent_count);
        parent_sel = sel->parent_sel[sel->clk_index];

        /* Clock needs to be enabled before changing the parent */
        enabled = __is_clk_gate_enabled(ccu, gate);
        if (!enabled && !__clk_gate(ccu, gate, true))
                return -ENXIO;

        /* Replace the selector value and record the result */
        reg_val = __ccu_read(ccu, sel->offset);
        reg_val = bitfield_replace(reg_val, sel->shift, sel->width, parent_sel);
        __ccu_write(ccu, sel->offset, reg_val);

        /* If the trigger fails we still want to disable the gate */
        if (!__clk_trigger(ccu, trig))
                ret = -EIO;

        /* Disable the clock again if it was disabled to begin with */
        if (!enabled && !__clk_gate(ccu, gate, false))
                ret = ret ? ret : -ENXIO;       /* return first error */

        return ret;
}

/*
 * Initialize a selector by committing our desired state to hardware
 * without the usual checks to see if it's already set up that way.
 * Returns true if successful, false otherwise.
 */
static bool sel_init(struct ccu_data *ccu, struct bcm_clk_gate *gate,
                        struct bcm_clk_sel *sel, struct bcm_clk_trig *trig)
{
        if (!selector_exists(sel))
                return true;
        return !__sel_commit(ccu, gate, sel, trig);
}

/*
 * Write a new value into a selector register to switch to a
 * different parent clock.  Returns 0 on success, or an error code
 * (from __sel_commit()) otherwise.
 */
static int selector_write(struct ccu_data *ccu, struct bcm_clk_gate *gate,
                        struct bcm_clk_sel *sel, struct bcm_clk_trig *trig,
                        u8 index)
{
        unsigned long flags;
        u8 previous;
        int ret;

        previous = sel->clk_index;
        if (previous == index)
                return 0;       /* No change */

        sel->clk_index = index;

        flags = ccu_lock(ccu);
        __ccu_write_enable(ccu);

        ret = __sel_commit(ccu, gate, sel, trig);

        __ccu_write_disable(ccu);
        ccu_unlock(ccu, flags);

        if (ret)
                sel->clk_index = previous;      /* Revert the change */

        return ret;
}

/* Clock operations */

static int kona_peri_clk_enable(struct clk_hw *hw)
{
        struct kona_clk *bcm_clk = to_kona_clk(hw);
        struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate;

        return clk_gate(bcm_clk->ccu, bcm_clk->init_data.name, gate, true);
}

static void kona_peri_clk_disable(struct clk_hw *hw)
{
        struct kona_clk *bcm_clk = to_kona_clk(hw);
        struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate;

        (void)clk_gate(bcm_clk->ccu, bcm_clk->init_data.name, gate, false);
}

static int kona_peri_clk_is_enabled(struct clk_hw *hw)
{
        struct kona_clk *bcm_clk = to_kona_clk(hw);
        struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate;

        return is_clk_gate_enabled(bcm_clk->ccu, gate) ? 1 : 0;
}

static unsigned long kona_peri_clk_recalc_rate(struct clk_hw *hw,
                        unsigned long parent_rate)
{
        struct kona_clk *bcm_clk = to_kona_clk(hw);
        struct peri_clk_data *data = bcm_clk->u.peri;

        return clk_recalc_rate(bcm_clk->ccu, &data->div, &data->pre_div,
                                parent_rate);
}

static long kona_peri_clk_round_rate(struct clk_hw *hw, unsigned long rate,
                        unsigned long *parent_rate)
{
        struct kona_clk *bcm_clk = to_kona_clk(hw);
        struct bcm_clk_div *div = &bcm_clk->u.peri->div;

        if (!divider_exists(div))
                return clk_hw_get_rate(hw);

        /* Quietly avoid a zero rate */
        return round_rate(bcm_clk->ccu, div, &bcm_clk->u.peri->pre_div,
                                rate ? rate : 1, *parent_rate, NULL);
}

static int kona_peri_clk_determine_rate(struct clk_hw *hw,
                                        struct clk_rate_request *req)
{
        struct kona_clk *bcm_clk = to_kona_clk(hw);
        struct clk_hw *current_parent;
        unsigned long parent_rate;
        unsigned long best_delta;
        unsigned long best_rate;
        u32 parent_count;
        long rate;
        u32 which;

        /*
         * If there is no other parent to choose, use the current one.
         * Note:  We don't honor (or use) CLK_SET_RATE_NO_REPARENT.
         */
        WARN_ON_ONCE(bcm_clk->init_data.flags & CLK_SET_RATE_NO_REPARENT);
        parent_count = (u32)bcm_clk->init_data.num_parents;
        if (parent_count < 2) {
                rate = kona_peri_clk_round_rate(hw, req->rate,
                                                &req->best_parent_rate);
                if (rate < 0)
                        return rate;

                req->rate = rate;
                return 0;
        }

        /* Unless we can do better, stick with current parent */
        current_parent = clk_hw_get_parent(hw);
        parent_rate = clk_hw_get_rate(current_parent);
        best_rate = kona_peri_clk_round_rate(hw, req->rate, &parent_rate);
        best_delta = abs(best_rate - req->rate);

        /* Check whether any other parent clock can produce a better result */
        for (which = 0; which < parent_count; which++) {
                struct clk_hw *parent = clk_hw_get_parent_by_index(hw, which);
                unsigned long delta;
                unsigned long other_rate;

                BUG_ON(!parent);
                if (parent == current_parent)
                        continue;

                /* We don't support CLK_SET_RATE_PARENT */
                parent_rate = clk_hw_get_rate(parent);
                other_rate = kona_peri_clk_round_rate(hw, req->rate,
                                                      &parent_rate);
                delta = abs(other_rate - req->rate);
                if (delta < best_delta) {
                        best_delta = delta;
                        best_rate = other_rate;
                        req->best_parent_hw = parent;
                        req->best_parent_rate = parent_rate;
                }
        }

        req->rate = best_rate;
        return 0;
}

static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index)
{
        struct kona_clk *bcm_clk = to_kona_clk(hw);
        struct peri_clk_data *data = bcm_clk->u.peri;
        struct bcm_clk_sel *sel = &data->sel;
        struct bcm_clk_trig *trig;
        int ret;

        BUG_ON(index >= sel->parent_count);

        /* If there's only one parent we don't require a selector */
        if (!selector_exists(sel))
                return 0;

        /*
         * The regular trigger is used by default, but if there's a
         * pre-trigger we want to use that instead.
         */
        trig = trigger_exists(&data->pre_trig) ? &data->pre_trig
                                               : &data->trig;

        ret = selector_write(bcm_clk->ccu, &data->gate, sel, trig, index);
        if (ret == -ENXIO) {
                pr_err("%s: gating failure for %s\n", __func__,
                        bcm_clk->init_data.name);
                ret = -EIO;     /* Don't proliferate weird errors */
        } else if (ret == -EIO) {
                pr_err("%s: %strigger failed for %s\n", __func__,
                        trig == &data->pre_trig ? "pre-" : "",
                        bcm_clk->init_data.name);
        }

        return ret;
}

static u8 kona_peri_clk_get_parent(struct clk_hw *hw)
{
        struct kona_clk *bcm_clk = to_kona_clk(hw);
        struct peri_clk_data *data = bcm_clk->u.peri;
        u8 index;

        index = selector_read_index(bcm_clk->ccu, &data->sel);

        /* Not all callers would handle an out-of-range value gracefully */
        return index == BAD_CLK_INDEX ? 0 : index;
}

static int kona_peri_clk_set_rate(struct clk_hw *hw, unsigned long rate,
                        unsigned long parent_rate)
{
        struct kona_clk *bcm_clk = to_kona_clk(hw);
        struct peri_clk_data *data = bcm_clk->u.peri;
        struct bcm_clk_div *div = &data->div;
        u64 scaled_div = 0;
        int ret;

        if (parent_rate > (unsigned long)LONG_MAX)
                return -EINVAL;

        if (rate == clk_hw_get_rate(hw))
                return 0;

        if (!divider_exists(div))
                return rate == parent_rate ? 0 : -EINVAL;

        /*
         * A fixed divider can't be changed.  (Nor can a fixed
         * pre-divider be, but for now we never actually try to
         * change that.)  Tolerate a request for a no-op change.
         */
        if (divider_is_fixed(&data->div))
                return rate == parent_rate ? 0 : -EINVAL;

        /*
         * Get the scaled divisor value needed to achieve a clock
         * rate as close as possible to what was requested, given
         * the parent clock rate supplied.
         */
        (void)round_rate(bcm_clk->ccu, div, &data->pre_div,
                                rate ? rate : 1, parent_rate, &scaled_div);

        /*
         * We aren't updating any pre-divider at this point, so
         * we'll use the regular trigger.
         */
        ret = divider_write(bcm_clk->ccu, &data->gate, &data->div,
                                &data->trig, scaled_div);
        if (ret == -ENXIO) {
                pr_err("%s: gating failure for %s\n", __func__,
                        bcm_clk->init_data.name);
                ret = -EIO;     /* Don't proliferate weird errors */
        } else if (ret == -EIO) {
                pr_err("%s: trigger failed for %s\n", __func__,
                        bcm_clk->init_data.name);
        }

        return ret;
}

struct clk_ops kona_peri_clk_ops = {
        .enable = kona_peri_clk_enable,
        .disable = kona_peri_clk_disable,
        .is_enabled = kona_peri_clk_is_enabled,
        .recalc_rate = kona_peri_clk_recalc_rate,
        .determine_rate = kona_peri_clk_determine_rate,
        .set_parent = kona_peri_clk_set_parent,
        .get_parent = kona_peri_clk_get_parent,
        .set_rate = kona_peri_clk_set_rate,
};

/* Put a peripheral clock into its initial state */
static bool __peri_clk_init(struct kona_clk *bcm_clk)
{
        struct ccu_data *ccu = bcm_clk->ccu;
        struct peri_clk_data *peri = bcm_clk->u.peri;
        const char *name = bcm_clk->init_data.name;
        struct bcm_clk_trig *trig;

        BUG_ON(bcm_clk->type != bcm_clk_peri);

        if (!policy_init(ccu, &peri->policy)) {
                pr_err("%s: error initializing policy for %s\n",
                        __func__, name);
                return false;
        }
        if (!gate_init(ccu, &peri->gate)) {
                pr_err("%s: error initializing gate for %s\n", __func__, name);
                return false;
        }
        if (!hyst_init(ccu, &peri->hyst)) {
                pr_err("%s: error initializing hyst for %s\n", __func__, name);
                return false;
        }
        if (!div_init(ccu, &peri->gate, &peri->div, &peri->trig)) {
                pr_err("%s: error initializing divider for %s\n", __func__,
                        name);
                return false;
        }

        /*
         * For the pre-divider and selector, the pre-trigger is used
         * if it's present, otherwise we just use the regular trigger.
         */
        trig = trigger_exists(&peri->pre_trig) ? &peri->pre_trig
                                               : &peri->trig;

        if (!div_init(ccu, &peri->gate, &peri->pre_div, trig)) {
                pr_err("%s: error initializing pre-divider for %s\n", __func__,
                        name);
                return false;
        }

        if (!sel_init(ccu, &peri->gate, &peri->sel, trig)) {
                pr_err("%s: error initializing selector for %s\n", __func__,
                        name);
                return false;
        }

        return true;
}

static bool __kona_clk_init(struct kona_clk *bcm_clk)
{
        switch (bcm_clk->type) {
        case bcm_clk_peri:
                return __peri_clk_init(bcm_clk);
        default:
                BUG();
        }
        return false;
}

/* Set a CCU and all its clocks into their desired initial state */
bool __init kona_ccu_init(struct ccu_data *ccu)
{
        unsigned long flags;
        unsigned int which;
        struct kona_clk *kona_clks = ccu->kona_clks;
        bool success = true;

        flags = ccu_lock(ccu);
        __ccu_write_enable(ccu);

        for (which = 0; which < ccu->clk_num; which++) {
                struct kona_clk *bcm_clk = &kona_clks[which];

                if (!bcm_clk->ccu)
                        continue;

                success &= __kona_clk_init(bcm_clk);
        }

        __ccu_write_disable(ccu);
        ccu_unlock(ccu, flags);
        return success;
}