arch/powerpc/boot/dts/cm5200.dts

   1 /*
   2  * CM5200 board Device Tree Source
   3  *
   4  * Copyright (C) 2007 Semihalf
   5  * Marian Balakowicz <m8@semihalf.com>
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 /include/ "mpc5200b.dtsi"
  14
  15 / {
  16         model = "schindler,cm5200";
  17         compatible = "schindler,cm5200";
  18
  19         soc5200@f0000000 {
  20                 timer@600 {     // General Purpose Timer
  21                         fsl,has-wdt;
  22                 };
  23
  24                 can@900 {
  25                         status = "disabled";
  26                 };
  27
  28                 can@980 {
  29                         status = "disabled";
  30                 };
  31
  32                 psc@2000 {              // PSC1
  33                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  34                 };
  35
  36                 psc@2200 {              // PSC2
  37                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  38                 };
  39
  40                 psc@2400 {              // PSC3
  41                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  42                 };
  43
  44                 psc@2600 {              // PSC4
  45                         status = "disabled";
  46                 };
  47
  48                 psc@2800 {              // PSC5
  49                         status = "disabled";
  50                 };
  51
  52                 psc@2c00 {              // PSC6
  53                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  54                 };
  55
  56                 ethernet@3000 {
  57                         phy-handle = <&phy0>;
  58                 };
  59
  60                 mdio@3000 {
  61                         phy0: ethernet-phy@0 {
  62                                 reg = <0>;
  63                         };
  64                 };
  65
  66                 ata@3a00 {
  67                         status = "disabled";
  68                 };
  69
  70                 i2c@3d00 {
  71                         status = "disabled";
  72                 };
  73
  74         };
  75
  76         pci@f0000d00 {
  77                 status = "disabled";
  78         };
  79
  80         localbus {
  81                 // 16-bit flash device at LocalPlus Bus CS0
  82                 flash@0,0 {
  83                         compatible = "cfi-flash";
  84                         reg = <0 0 0x2000000>;
  85                         bank-width = <2>;
  86                         device-width = <2>;
  87                         #size-cells = <1>;
  88                         #address-cells = <1>;
  89                 };
  90         };
  91 };