Documentation/devicetree/bindings/display/imx/hdmi.txt

   1 Device-Tree bindings for HDMI Transmitter
   2
   3 HDMI Transmitter
   4 ================
   5
   6 The HDMI Transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
   7 with accompanying PHY IP.
   8
   9 Required properties:
  10  - #address-cells : should be <1>
  11  - #size-cells : should be <0>
  12  - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
  13  - gpr : should be <&gpr>.
  14    The phandle points to the iomuxc-gpr region containing the HDMI
  15    multiplexer control register.
  16  - clocks, clock-names : phandles to the HDMI iahb and isrf clocks, as described
  17    in Documentation/devicetree/bindings/clock/clock-bindings.txt and
  18    Documentation/devicetree/bindings/clock/imx6q-clock.txt.
  19  - port@[0-4]: Up to four port nodes with endpoint definitions as defined in
  20    Documentation/devicetree/bindings/media/video-interfaces.txt,
  21    corresponding to the four inputs to the HDMI multiplexer.
  22
  23 Optional properties:
  24  - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  25
  26 example:
  27
  28         gpr: iomuxc-gpr@020e0000 {
  29                 /* ... */
  30         };
  31
  32         hdmi: hdmi@0120000 {
  33                 #address-cells = <1>;
  34                 #size-cells = <0>;
  35                 compatible = "fsl,imx6q-hdmi";
  36                 reg = <0x00120000 0x9000>;
  37                 interrupts = <0 115 0x04>;
  38                 gpr = <&gpr>;
  39                 clocks = <&clks 123>, <&clks 124>;
  40                 clock-names = "iahb", "isfr";
  41                 ddc-i2c-bus = <&i2c2>;
  42
  43                 port@0 {
  44                         reg = <0>;
  45
  46                         hdmi_mux_0: endpoint {
  47                                 remote-endpoint = <&ipu1_di0_hdmi>;
  48                         };
  49                 };
  50
  51                 port@1 {
  52                         reg = <1>;
  53
  54                         hdmi_mux_1: endpoint {
  55                                 remote-endpoint = <&ipu1_di1_hdmi>;
  56                         };
  57                 };
  58         };