sh_eth: fix EESIPR values for SH77{34|63}
[linux/fpc-iii.git] / drivers / dma / pl330.c
blob87fd01539fcb74daa0c80a62a268311b7125dce1
1 /*
2 * Copyright (c) 2012 Samsung Electronics Co., Ltd.
3 * http://www.samsung.com
5 * Copyright (C) 2010 Samsung Electronics Co. Ltd.
6 * Jaswinder Singh <jassi.brar@samsung.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
14 #include <linux/kernel.h>
15 #include <linux/io.h>
16 #include <linux/init.h>
17 #include <linux/slab.h>
18 #include <linux/module.h>
19 #include <linux/string.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/dmaengine.h>
24 #include <linux/amba/bus.h>
25 #include <linux/amba/pl330.h>
26 #include <linux/scatterlist.h>
27 #include <linux/of.h>
28 #include <linux/of_dma.h>
29 #include <linux/err.h>
30 #include <linux/pm_runtime.h>
32 #include "dmaengine.h"
33 #define PL330_MAX_CHAN 8
34 #define PL330_MAX_IRQS 32
35 #define PL330_MAX_PERI 32
36 #define PL330_MAX_BURST 16
38 #define PL330_QUIRK_BROKEN_NO_FLUSHP BIT(0)
40 enum pl330_cachectrl {
41 CCTRL0, /* Noncacheable and nonbufferable */
42 CCTRL1, /* Bufferable only */
43 CCTRL2, /* Cacheable, but do not allocate */
44 CCTRL3, /* Cacheable and bufferable, but do not allocate */
45 INVALID1, /* AWCACHE = 0x1000 */
46 INVALID2,
47 CCTRL6, /* Cacheable write-through, allocate on writes only */
48 CCTRL7, /* Cacheable write-back, allocate on writes only */
51 enum pl330_byteswap {
52 SWAP_NO,
53 SWAP_2,
54 SWAP_4,
55 SWAP_8,
56 SWAP_16,
59 /* Register and Bit field Definitions */
60 #define DS 0x0
61 #define DS_ST_STOP 0x0
62 #define DS_ST_EXEC 0x1
63 #define DS_ST_CMISS 0x2
64 #define DS_ST_UPDTPC 0x3
65 #define DS_ST_WFE 0x4
66 #define DS_ST_ATBRR 0x5
67 #define DS_ST_QBUSY 0x6
68 #define DS_ST_WFP 0x7
69 #define DS_ST_KILL 0x8
70 #define DS_ST_CMPLT 0x9
71 #define DS_ST_FLTCMP 0xe
72 #define DS_ST_FAULT 0xf
74 #define DPC 0x4
75 #define INTEN 0x20
76 #define ES 0x24
77 #define INTSTATUS 0x28
78 #define INTCLR 0x2c
79 #define FSM 0x30
80 #define FSC 0x34
81 #define FTM 0x38
83 #define _FTC 0x40
84 #define FTC(n) (_FTC + (n)*0x4)
86 #define _CS 0x100
87 #define CS(n) (_CS + (n)*0x8)
88 #define CS_CNS (1 << 21)
90 #define _CPC 0x104
91 #define CPC(n) (_CPC + (n)*0x8)
93 #define _SA 0x400
94 #define SA(n) (_SA + (n)*0x20)
96 #define _DA 0x404
97 #define DA(n) (_DA + (n)*0x20)
99 #define _CC 0x408
100 #define CC(n) (_CC + (n)*0x20)
102 #define CC_SRCINC (1 << 0)
103 #define CC_DSTINC (1 << 14)
104 #define CC_SRCPRI (1 << 8)
105 #define CC_DSTPRI (1 << 22)
106 #define CC_SRCNS (1 << 9)
107 #define CC_DSTNS (1 << 23)
108 #define CC_SRCIA (1 << 10)
109 #define CC_DSTIA (1 << 24)
110 #define CC_SRCBRSTLEN_SHFT 4
111 #define CC_DSTBRSTLEN_SHFT 18
112 #define CC_SRCBRSTSIZE_SHFT 1
113 #define CC_DSTBRSTSIZE_SHFT 15
114 #define CC_SRCCCTRL_SHFT 11
115 #define CC_SRCCCTRL_MASK 0x7
116 #define CC_DSTCCTRL_SHFT 25
117 #define CC_DRCCCTRL_MASK 0x7
118 #define CC_SWAP_SHFT 28
120 #define _LC0 0x40c
121 #define LC0(n) (_LC0 + (n)*0x20)
123 #define _LC1 0x410
124 #define LC1(n) (_LC1 + (n)*0x20)
126 #define DBGSTATUS 0xd00
127 #define DBG_BUSY (1 << 0)
129 #define DBGCMD 0xd04
130 #define DBGINST0 0xd08
131 #define DBGINST1 0xd0c
133 #define CR0 0xe00
134 #define CR1 0xe04
135 #define CR2 0xe08
136 #define CR3 0xe0c
137 #define CR4 0xe10
138 #define CRD 0xe14
140 #define PERIPH_ID 0xfe0
141 #define PERIPH_REV_SHIFT 20
142 #define PERIPH_REV_MASK 0xf
143 #define PERIPH_REV_R0P0 0
144 #define PERIPH_REV_R1P0 1
145 #define PERIPH_REV_R1P1 2
147 #define CR0_PERIPH_REQ_SET (1 << 0)
148 #define CR0_BOOT_EN_SET (1 << 1)
149 #define CR0_BOOT_MAN_NS (1 << 2)
150 #define CR0_NUM_CHANS_SHIFT 4
151 #define CR0_NUM_CHANS_MASK 0x7
152 #define CR0_NUM_PERIPH_SHIFT 12
153 #define CR0_NUM_PERIPH_MASK 0x1f
154 #define CR0_NUM_EVENTS_SHIFT 17
155 #define CR0_NUM_EVENTS_MASK 0x1f
157 #define CR1_ICACHE_LEN_SHIFT 0
158 #define CR1_ICACHE_LEN_MASK 0x7
159 #define CR1_NUM_ICACHELINES_SHIFT 4
160 #define CR1_NUM_ICACHELINES_MASK 0xf
162 #define CRD_DATA_WIDTH_SHIFT 0
163 #define CRD_DATA_WIDTH_MASK 0x7
164 #define CRD_WR_CAP_SHIFT 4
165 #define CRD_WR_CAP_MASK 0x7
166 #define CRD_WR_Q_DEP_SHIFT 8
167 #define CRD_WR_Q_DEP_MASK 0xf
168 #define CRD_RD_CAP_SHIFT 12
169 #define CRD_RD_CAP_MASK 0x7
170 #define CRD_RD_Q_DEP_SHIFT 16
171 #define CRD_RD_Q_DEP_MASK 0xf
172 #define CRD_DATA_BUFF_SHIFT 20
173 #define CRD_DATA_BUFF_MASK 0x3ff
175 #define PART 0x330
176 #define DESIGNER 0x41
177 #define REVISION 0x0
178 #define INTEG_CFG 0x0
179 #define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12))
181 #define PL330_STATE_STOPPED (1 << 0)
182 #define PL330_STATE_EXECUTING (1 << 1)
183 #define PL330_STATE_WFE (1 << 2)
184 #define PL330_STATE_FAULTING (1 << 3)
185 #define PL330_STATE_COMPLETING (1 << 4)
186 #define PL330_STATE_WFP (1 << 5)
187 #define PL330_STATE_KILLING (1 << 6)
188 #define PL330_STATE_FAULT_COMPLETING (1 << 7)
189 #define PL330_STATE_CACHEMISS (1 << 8)
190 #define PL330_STATE_UPDTPC (1 << 9)
191 #define PL330_STATE_ATBARRIER (1 << 10)
192 #define PL330_STATE_QUEUEBUSY (1 << 11)
193 #define PL330_STATE_INVALID (1 << 15)
195 #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
196 | PL330_STATE_WFE | PL330_STATE_FAULTING)
198 #define CMD_DMAADDH 0x54
199 #define CMD_DMAEND 0x00
200 #define CMD_DMAFLUSHP 0x35
201 #define CMD_DMAGO 0xa0
202 #define CMD_DMALD 0x04
203 #define CMD_DMALDP 0x25
204 #define CMD_DMALP 0x20
205 #define CMD_DMALPEND 0x28
206 #define CMD_DMAKILL 0x01
207 #define CMD_DMAMOV 0xbc
208 #define CMD_DMANOP 0x18
209 #define CMD_DMARMB 0x12
210 #define CMD_DMASEV 0x34
211 #define CMD_DMAST 0x08
212 #define CMD_DMASTP 0x29
213 #define CMD_DMASTZ 0x0c
214 #define CMD_DMAWFE 0x36
215 #define CMD_DMAWFP 0x30
216 #define CMD_DMAWMB 0x13
218 #define SZ_DMAADDH 3
219 #define SZ_DMAEND 1
220 #define SZ_DMAFLUSHP 2
221 #define SZ_DMALD 1
222 #define SZ_DMALDP 2
223 #define SZ_DMALP 2
224 #define SZ_DMALPEND 2
225 #define SZ_DMAKILL 1
226 #define SZ_DMAMOV 6
227 #define SZ_DMANOP 1
228 #define SZ_DMARMB 1
229 #define SZ_DMASEV 2
230 #define SZ_DMAST 1
231 #define SZ_DMASTP 2
232 #define SZ_DMASTZ 1
233 #define SZ_DMAWFE 2
234 #define SZ_DMAWFP 2
235 #define SZ_DMAWMB 1
236 #define SZ_DMAGO 6
238 #define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
239 #define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
241 #define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
242 #define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
245 * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
246 * at 1byte/burst for P<->M and M<->M respectively.
247 * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
248 * should be enough for P<->M and M<->M respectively.
250 #define MCODE_BUFF_PER_REQ 256
252 /* Use this _only_ to wait on transient states */
253 #define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax();
255 #ifdef PL330_DEBUG_MCGEN
256 static unsigned cmd_line;
257 #define PL330_DBGCMD_DUMP(off, x...) do { \
258 printk("%x:", cmd_line); \
259 printk(x); \
260 cmd_line += off; \
261 } while (0)
262 #define PL330_DBGMC_START(addr) (cmd_line = addr)
263 #else
264 #define PL330_DBGCMD_DUMP(off, x...) do {} while (0)
265 #define PL330_DBGMC_START(addr) do {} while (0)
266 #endif
268 /* The number of default descriptors */
270 #define NR_DEFAULT_DESC 16
272 /* Delay for runtime PM autosuspend, ms */
273 #define PL330_AUTOSUSPEND_DELAY 20
275 /* Populated by the PL330 core driver for DMA API driver's info */
276 struct pl330_config {
277 u32 periph_id;
278 #define DMAC_MODE_NS (1 << 0)
279 unsigned int mode;
280 unsigned int data_bus_width:10; /* In number of bits */
281 unsigned int data_buf_dep:11;
282 unsigned int num_chan:4;
283 unsigned int num_peri:6;
284 u32 peri_ns;
285 unsigned int num_events:6;
286 u32 irq_ns;
290 * Request Configuration.
291 * The PL330 core does not modify this and uses the last
292 * working configuration if the request doesn't provide any.
294 * The Client may want to provide this info only for the
295 * first request and a request with new settings.
297 struct pl330_reqcfg {
298 /* Address Incrementing */
299 unsigned dst_inc:1;
300 unsigned src_inc:1;
303 * For now, the SRC & DST protection levels
304 * and burst size/length are assumed same.
306 bool nonsecure;
307 bool privileged;
308 bool insnaccess;
309 unsigned brst_len:5;
310 unsigned brst_size:3; /* in power of 2 */
312 enum pl330_cachectrl dcctl;
313 enum pl330_cachectrl scctl;
314 enum pl330_byteswap swap;
315 struct pl330_config *pcfg;
319 * One cycle of DMAC operation.
320 * There may be more than one xfer in a request.
322 struct pl330_xfer {
323 u32 src_addr;
324 u32 dst_addr;
325 /* Size to xfer */
326 u32 bytes;
329 /* The xfer callbacks are made with one of these arguments. */
330 enum pl330_op_err {
331 /* The all xfers in the request were success. */
332 PL330_ERR_NONE,
333 /* If req aborted due to global error. */
334 PL330_ERR_ABORT,
335 /* If req failed due to problem with Channel. */
336 PL330_ERR_FAIL,
339 enum dmamov_dst {
340 SAR = 0,
341 CCR,
342 DAR,
345 enum pl330_dst {
346 SRC = 0,
347 DST,
350 enum pl330_cond {
351 SINGLE,
352 BURST,
353 ALWAYS,
356 struct dma_pl330_desc;
358 struct _pl330_req {
359 u32 mc_bus;
360 void *mc_cpu;
361 struct dma_pl330_desc *desc;
364 /* ToBeDone for tasklet */
365 struct _pl330_tbd {
366 bool reset_dmac;
367 bool reset_mngr;
368 u8 reset_chan;
371 /* A DMAC Thread */
372 struct pl330_thread {
373 u8 id;
374 int ev;
375 /* If the channel is not yet acquired by any client */
376 bool free;
377 /* Parent DMAC */
378 struct pl330_dmac *dmac;
379 /* Only two at a time */
380 struct _pl330_req req[2];
381 /* Index of the last enqueued request */
382 unsigned lstenq;
383 /* Index of the last submitted request or -1 if the DMA is stopped */
384 int req_running;
387 enum pl330_dmac_state {
388 UNINIT,
389 INIT,
390 DYING,
393 enum desc_status {
394 /* In the DMAC pool */
395 FREE,
397 * Allocated to some channel during prep_xxx
398 * Also may be sitting on the work_list.
400 PREP,
402 * Sitting on the work_list and already submitted
403 * to the PL330 core. Not more than two descriptors
404 * of a channel can be BUSY at any time.
406 BUSY,
408 * Sitting on the channel work_list but xfer done
409 * by PL330 core
411 DONE,
414 struct dma_pl330_chan {
415 /* Schedule desc completion */
416 struct tasklet_struct task;
418 /* DMA-Engine Channel */
419 struct dma_chan chan;
421 /* List of submitted descriptors */
422 struct list_head submitted_list;
423 /* List of issued descriptors */
424 struct list_head work_list;
425 /* List of completed descriptors */
426 struct list_head completed_list;
428 /* Pointer to the DMAC that manages this channel,
429 * NULL if the channel is available to be acquired.
430 * As the parent, this DMAC also provides descriptors
431 * to the channel.
433 struct pl330_dmac *dmac;
435 /* To protect channel manipulation */
436 spinlock_t lock;
439 * Hardware channel thread of PL330 DMAC. NULL if the channel is
440 * available.
442 struct pl330_thread *thread;
444 /* For D-to-M and M-to-D channels */
445 int burst_sz; /* the peripheral fifo width */
446 int burst_len; /* the number of burst */
447 dma_addr_t fifo_addr;
449 /* for cyclic capability */
450 bool cyclic;
453 struct pl330_dmac {
454 /* DMA-Engine Device */
455 struct dma_device ddma;
457 /* Holds info about sg limitations */
458 struct device_dma_parameters dma_parms;
460 /* Pool of descriptors available for the DMAC's channels */
461 struct list_head desc_pool;
462 /* To protect desc_pool manipulation */
463 spinlock_t pool_lock;
465 /* Size of MicroCode buffers for each channel. */
466 unsigned mcbufsz;
467 /* ioremap'ed address of PL330 registers. */
468 void __iomem *base;
469 /* Populated by the PL330 core driver during pl330_add */
470 struct pl330_config pcfg;
472 spinlock_t lock;
473 /* Maximum possible events/irqs */
474 int events[32];
475 /* BUS address of MicroCode buffer */
476 dma_addr_t mcode_bus;
477 /* CPU address of MicroCode buffer */
478 void *mcode_cpu;
479 /* List of all Channel threads */
480 struct pl330_thread *channels;
481 /* Pointer to the MANAGER thread */
482 struct pl330_thread *manager;
483 /* To handle bad news in interrupt */
484 struct tasklet_struct tasks;
485 struct _pl330_tbd dmac_tbd;
486 /* State of DMAC operation */
487 enum pl330_dmac_state state;
488 /* Holds list of reqs with due callbacks */
489 struct list_head req_done;
491 /* Peripheral channels connected to this DMAC */
492 unsigned int num_peripherals;
493 struct dma_pl330_chan *peripherals; /* keep at end */
494 int quirks;
497 static struct pl330_of_quirks {
498 char *quirk;
499 int id;
500 } of_quirks[] = {
502 .quirk = "arm,pl330-broken-no-flushp",
503 .id = PL330_QUIRK_BROKEN_NO_FLUSHP,
507 struct dma_pl330_desc {
508 /* To attach to a queue as child */
509 struct list_head node;
511 /* Descriptor for the DMA Engine API */
512 struct dma_async_tx_descriptor txd;
514 /* Xfer for PL330 core */
515 struct pl330_xfer px;
517 struct pl330_reqcfg rqcfg;
519 enum desc_status status;
521 int bytes_requested;
522 bool last;
524 /* The channel which currently holds this desc */
525 struct dma_pl330_chan *pchan;
527 enum dma_transfer_direction rqtype;
528 /* Index of peripheral for the xfer. */
529 unsigned peri:5;
530 /* Hook to attach to DMAC's list of reqs with due callback */
531 struct list_head rqd;
534 struct _xfer_spec {
535 u32 ccr;
536 struct dma_pl330_desc *desc;
539 static inline bool _queue_empty(struct pl330_thread *thrd)
541 return thrd->req[0].desc == NULL && thrd->req[1].desc == NULL;
544 static inline bool _queue_full(struct pl330_thread *thrd)
546 return thrd->req[0].desc != NULL && thrd->req[1].desc != NULL;
549 static inline bool is_manager(struct pl330_thread *thrd)
551 return thrd->dmac->manager == thrd;
554 /* If manager of the thread is in Non-Secure mode */
555 static inline bool _manager_ns(struct pl330_thread *thrd)
557 return (thrd->dmac->pcfg.mode & DMAC_MODE_NS) ? true : false;
560 static inline u32 get_revision(u32 periph_id)
562 return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
565 static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
566 enum pl330_dst da, u16 val)
568 if (dry_run)
569 return SZ_DMAADDH;
571 buf[0] = CMD_DMAADDH;
572 buf[0] |= (da << 1);
573 buf[1] = val;
574 buf[2] = val >> 8;
576 PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
577 da == 1 ? "DA" : "SA", val);
579 return SZ_DMAADDH;
582 static inline u32 _emit_END(unsigned dry_run, u8 buf[])
584 if (dry_run)
585 return SZ_DMAEND;
587 buf[0] = CMD_DMAEND;
589 PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
591 return SZ_DMAEND;
594 static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
596 if (dry_run)
597 return SZ_DMAFLUSHP;
599 buf[0] = CMD_DMAFLUSHP;
601 peri &= 0x1f;
602 peri <<= 3;
603 buf[1] = peri;
605 PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
607 return SZ_DMAFLUSHP;
610 static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond)
612 if (dry_run)
613 return SZ_DMALD;
615 buf[0] = CMD_DMALD;
617 if (cond == SINGLE)
618 buf[0] |= (0 << 1) | (1 << 0);
619 else if (cond == BURST)
620 buf[0] |= (1 << 1) | (1 << 0);
622 PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
623 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
625 return SZ_DMALD;
628 static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
629 enum pl330_cond cond, u8 peri)
631 if (dry_run)
632 return SZ_DMALDP;
634 buf[0] = CMD_DMALDP;
636 if (cond == BURST)
637 buf[0] |= (1 << 1);
639 peri &= 0x1f;
640 peri <<= 3;
641 buf[1] = peri;
643 PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
644 cond == SINGLE ? 'S' : 'B', peri >> 3);
646 return SZ_DMALDP;
649 static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
650 unsigned loop, u8 cnt)
652 if (dry_run)
653 return SZ_DMALP;
655 buf[0] = CMD_DMALP;
657 if (loop)
658 buf[0] |= (1 << 1);
660 cnt--; /* DMAC increments by 1 internally */
661 buf[1] = cnt;
663 PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
665 return SZ_DMALP;
668 struct _arg_LPEND {
669 enum pl330_cond cond;
670 bool forever;
671 unsigned loop;
672 u8 bjump;
675 static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
676 const struct _arg_LPEND *arg)
678 enum pl330_cond cond = arg->cond;
679 bool forever = arg->forever;
680 unsigned loop = arg->loop;
681 u8 bjump = arg->bjump;
683 if (dry_run)
684 return SZ_DMALPEND;
686 buf[0] = CMD_DMALPEND;
688 if (loop)
689 buf[0] |= (1 << 2);
691 if (!forever)
692 buf[0] |= (1 << 4);
694 if (cond == SINGLE)
695 buf[0] |= (0 << 1) | (1 << 0);
696 else if (cond == BURST)
697 buf[0] |= (1 << 1) | (1 << 0);
699 buf[1] = bjump;
701 PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
702 forever ? "FE" : "END",
703 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
704 loop ? '1' : '0',
705 bjump);
707 return SZ_DMALPEND;
710 static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
712 if (dry_run)
713 return SZ_DMAKILL;
715 buf[0] = CMD_DMAKILL;
717 return SZ_DMAKILL;
720 static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
721 enum dmamov_dst dst, u32 val)
723 if (dry_run)
724 return SZ_DMAMOV;
726 buf[0] = CMD_DMAMOV;
727 buf[1] = dst;
728 buf[2] = val;
729 buf[3] = val >> 8;
730 buf[4] = val >> 16;
731 buf[5] = val >> 24;
733 PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
734 dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
736 return SZ_DMAMOV;
739 static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
741 if (dry_run)
742 return SZ_DMANOP;
744 buf[0] = CMD_DMANOP;
746 PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
748 return SZ_DMANOP;
751 static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
753 if (dry_run)
754 return SZ_DMARMB;
756 buf[0] = CMD_DMARMB;
758 PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
760 return SZ_DMARMB;
763 static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
765 if (dry_run)
766 return SZ_DMASEV;
768 buf[0] = CMD_DMASEV;
770 ev &= 0x1f;
771 ev <<= 3;
772 buf[1] = ev;
774 PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
776 return SZ_DMASEV;
779 static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
781 if (dry_run)
782 return SZ_DMAST;
784 buf[0] = CMD_DMAST;
786 if (cond == SINGLE)
787 buf[0] |= (0 << 1) | (1 << 0);
788 else if (cond == BURST)
789 buf[0] |= (1 << 1) | (1 << 0);
791 PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
792 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
794 return SZ_DMAST;
797 static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
798 enum pl330_cond cond, u8 peri)
800 if (dry_run)
801 return SZ_DMASTP;
803 buf[0] = CMD_DMASTP;
805 if (cond == BURST)
806 buf[0] |= (1 << 1);
808 peri &= 0x1f;
809 peri <<= 3;
810 buf[1] = peri;
812 PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
813 cond == SINGLE ? 'S' : 'B', peri >> 3);
815 return SZ_DMASTP;
818 static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
820 if (dry_run)
821 return SZ_DMASTZ;
823 buf[0] = CMD_DMASTZ;
825 PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
827 return SZ_DMASTZ;
830 static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
831 unsigned invalidate)
833 if (dry_run)
834 return SZ_DMAWFE;
836 buf[0] = CMD_DMAWFE;
838 ev &= 0x1f;
839 ev <<= 3;
840 buf[1] = ev;
842 if (invalidate)
843 buf[1] |= (1 << 1);
845 PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
846 ev >> 3, invalidate ? ", I" : "");
848 return SZ_DMAWFE;
851 static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
852 enum pl330_cond cond, u8 peri)
854 if (dry_run)
855 return SZ_DMAWFP;
857 buf[0] = CMD_DMAWFP;
859 if (cond == SINGLE)
860 buf[0] |= (0 << 1) | (0 << 0);
861 else if (cond == BURST)
862 buf[0] |= (1 << 1) | (0 << 0);
863 else
864 buf[0] |= (0 << 1) | (1 << 0);
866 peri &= 0x1f;
867 peri <<= 3;
868 buf[1] = peri;
870 PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
871 cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
873 return SZ_DMAWFP;
876 static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
878 if (dry_run)
879 return SZ_DMAWMB;
881 buf[0] = CMD_DMAWMB;
883 PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
885 return SZ_DMAWMB;
888 struct _arg_GO {
889 u8 chan;
890 u32 addr;
891 unsigned ns;
894 static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
895 const struct _arg_GO *arg)
897 u8 chan = arg->chan;
898 u32 addr = arg->addr;
899 unsigned ns = arg->ns;
901 if (dry_run)
902 return SZ_DMAGO;
904 buf[0] = CMD_DMAGO;
905 buf[0] |= (ns << 1);
906 buf[1] = chan & 0x7;
907 buf[2] = addr;
908 buf[3] = addr >> 8;
909 buf[4] = addr >> 16;
910 buf[5] = addr >> 24;
912 return SZ_DMAGO;
915 #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
917 /* Returns Time-Out */
918 static bool _until_dmac_idle(struct pl330_thread *thrd)
920 void __iomem *regs = thrd->dmac->base;
921 unsigned long loops = msecs_to_loops(5);
923 do {
924 /* Until Manager is Idle */
925 if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
926 break;
928 cpu_relax();
929 } while (--loops);
931 if (!loops)
932 return true;
934 return false;
937 static inline void _execute_DBGINSN(struct pl330_thread *thrd,
938 u8 insn[], bool as_manager)
940 void __iomem *regs = thrd->dmac->base;
941 u32 val;
943 val = (insn[0] << 16) | (insn[1] << 24);
944 if (!as_manager) {
945 val |= (1 << 0);
946 val |= (thrd->id << 8); /* Channel Number */
948 writel(val, regs + DBGINST0);
950 val = le32_to_cpu(*((__le32 *)&insn[2]));
951 writel(val, regs + DBGINST1);
953 /* If timed out due to halted state-machine */
954 if (_until_dmac_idle(thrd)) {
955 dev_err(thrd->dmac->ddma.dev, "DMAC halted!\n");
956 return;
959 /* Get going */
960 writel(0, regs + DBGCMD);
963 static inline u32 _state(struct pl330_thread *thrd)
965 void __iomem *regs = thrd->dmac->base;
966 u32 val;
968 if (is_manager(thrd))
969 val = readl(regs + DS) & 0xf;
970 else
971 val = readl(regs + CS(thrd->id)) & 0xf;
973 switch (val) {
974 case DS_ST_STOP:
975 return PL330_STATE_STOPPED;
976 case DS_ST_EXEC:
977 return PL330_STATE_EXECUTING;
978 case DS_ST_CMISS:
979 return PL330_STATE_CACHEMISS;
980 case DS_ST_UPDTPC:
981 return PL330_STATE_UPDTPC;
982 case DS_ST_WFE:
983 return PL330_STATE_WFE;
984 case DS_ST_FAULT:
985 return PL330_STATE_FAULTING;
986 case DS_ST_ATBRR:
987 if (is_manager(thrd))
988 return PL330_STATE_INVALID;
989 else
990 return PL330_STATE_ATBARRIER;
991 case DS_ST_QBUSY:
992 if (is_manager(thrd))
993 return PL330_STATE_INVALID;
994 else
995 return PL330_STATE_QUEUEBUSY;
996 case DS_ST_WFP:
997 if (is_manager(thrd))
998 return PL330_STATE_INVALID;
999 else
1000 return PL330_STATE_WFP;
1001 case DS_ST_KILL:
1002 if (is_manager(thrd))
1003 return PL330_STATE_INVALID;
1004 else
1005 return PL330_STATE_KILLING;
1006 case DS_ST_CMPLT:
1007 if (is_manager(thrd))
1008 return PL330_STATE_INVALID;
1009 else
1010 return PL330_STATE_COMPLETING;
1011 case DS_ST_FLTCMP:
1012 if (is_manager(thrd))
1013 return PL330_STATE_INVALID;
1014 else
1015 return PL330_STATE_FAULT_COMPLETING;
1016 default:
1017 return PL330_STATE_INVALID;
1021 static void _stop(struct pl330_thread *thrd)
1023 void __iomem *regs = thrd->dmac->base;
1024 u8 insn[6] = {0, 0, 0, 0, 0, 0};
1026 if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
1027 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1029 /* Return if nothing needs to be done */
1030 if (_state(thrd) == PL330_STATE_COMPLETING
1031 || _state(thrd) == PL330_STATE_KILLING
1032 || _state(thrd) == PL330_STATE_STOPPED)
1033 return;
1035 _emit_KILL(0, insn);
1037 /* Stop generating interrupts for SEV */
1038 writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
1040 _execute_DBGINSN(thrd, insn, is_manager(thrd));
1043 /* Start doing req 'idx' of thread 'thrd' */
1044 static bool _trigger(struct pl330_thread *thrd)
1046 void __iomem *regs = thrd->dmac->base;
1047 struct _pl330_req *req;
1048 struct dma_pl330_desc *desc;
1049 struct _arg_GO go;
1050 unsigned ns;
1051 u8 insn[6] = {0, 0, 0, 0, 0, 0};
1052 int idx;
1054 /* Return if already ACTIVE */
1055 if (_state(thrd) != PL330_STATE_STOPPED)
1056 return true;
1058 idx = 1 - thrd->lstenq;
1059 if (thrd->req[idx].desc != NULL) {
1060 req = &thrd->req[idx];
1061 } else {
1062 idx = thrd->lstenq;
1063 if (thrd->req[idx].desc != NULL)
1064 req = &thrd->req[idx];
1065 else
1066 req = NULL;
1069 /* Return if no request */
1070 if (!req)
1071 return true;
1073 /* Return if req is running */
1074 if (idx == thrd->req_running)
1075 return true;
1077 desc = req->desc;
1079 ns = desc->rqcfg.nonsecure ? 1 : 0;
1081 /* See 'Abort Sources' point-4 at Page 2-25 */
1082 if (_manager_ns(thrd) && !ns)
1083 dev_info(thrd->dmac->ddma.dev, "%s:%d Recipe for ABORT!\n",
1084 __func__, __LINE__);
1086 go.chan = thrd->id;
1087 go.addr = req->mc_bus;
1088 go.ns = ns;
1089 _emit_GO(0, insn, &go);
1091 /* Set to generate interrupts for SEV */
1092 writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
1094 /* Only manager can execute GO */
1095 _execute_DBGINSN(thrd, insn, true);
1097 thrd->req_running = idx;
1099 return true;
1102 static bool _start(struct pl330_thread *thrd)
1104 switch (_state(thrd)) {
1105 case PL330_STATE_FAULT_COMPLETING:
1106 UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
1108 if (_state(thrd) == PL330_STATE_KILLING)
1109 UNTIL(thrd, PL330_STATE_STOPPED)
1111 case PL330_STATE_FAULTING:
1112 _stop(thrd);
1114 case PL330_STATE_KILLING:
1115 case PL330_STATE_COMPLETING:
1116 UNTIL(thrd, PL330_STATE_STOPPED)
1118 case PL330_STATE_STOPPED:
1119 return _trigger(thrd);
1121 case PL330_STATE_WFP:
1122 case PL330_STATE_QUEUEBUSY:
1123 case PL330_STATE_ATBARRIER:
1124 case PL330_STATE_UPDTPC:
1125 case PL330_STATE_CACHEMISS:
1126 case PL330_STATE_EXECUTING:
1127 return true;
1129 case PL330_STATE_WFE: /* For RESUME, nothing yet */
1130 default:
1131 return false;
1135 static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
1136 const struct _xfer_spec *pxs, int cyc)
1138 int off = 0;
1139 struct pl330_config *pcfg = pxs->desc->rqcfg.pcfg;
1141 /* check lock-up free version */
1142 if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
1143 while (cyc--) {
1144 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1145 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1147 } else {
1148 while (cyc--) {
1149 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1150 off += _emit_RMB(dry_run, &buf[off]);
1151 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1152 off += _emit_WMB(dry_run, &buf[off]);
1156 return off;
1159 static inline int _ldst_devtomem(struct pl330_dmac *pl330, unsigned dry_run,
1160 u8 buf[], const struct _xfer_spec *pxs,
1161 int cyc)
1163 int off = 0;
1164 enum pl330_cond cond;
1166 if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1167 cond = BURST;
1168 else
1169 cond = SINGLE;
1171 while (cyc--) {
1172 off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1173 off += _emit_LDP(dry_run, &buf[off], cond, pxs->desc->peri);
1174 off += _emit_ST(dry_run, &buf[off], ALWAYS);
1176 if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1177 off += _emit_FLUSHP(dry_run, &buf[off],
1178 pxs->desc->peri);
1181 return off;
1184 static inline int _ldst_memtodev(struct pl330_dmac *pl330,
1185 unsigned dry_run, u8 buf[],
1186 const struct _xfer_spec *pxs, int cyc)
1188 int off = 0;
1189 enum pl330_cond cond;
1191 if (pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP)
1192 cond = BURST;
1193 else
1194 cond = SINGLE;
1196 while (cyc--) {
1197 off += _emit_WFP(dry_run, &buf[off], cond, pxs->desc->peri);
1198 off += _emit_LD(dry_run, &buf[off], ALWAYS);
1199 off += _emit_STP(dry_run, &buf[off], cond, pxs->desc->peri);
1201 if (!(pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP))
1202 off += _emit_FLUSHP(dry_run, &buf[off],
1203 pxs->desc->peri);
1206 return off;
1209 static int _bursts(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1210 const struct _xfer_spec *pxs, int cyc)
1212 int off = 0;
1214 switch (pxs->desc->rqtype) {
1215 case DMA_MEM_TO_DEV:
1216 off += _ldst_memtodev(pl330, dry_run, &buf[off], pxs, cyc);
1217 break;
1218 case DMA_DEV_TO_MEM:
1219 off += _ldst_devtomem(pl330, dry_run, &buf[off], pxs, cyc);
1220 break;
1221 case DMA_MEM_TO_MEM:
1222 off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
1223 break;
1224 default:
1225 off += 0x40000000; /* Scare off the Client */
1226 break;
1229 return off;
1232 /* Returns bytes consumed and updates bursts */
1233 static inline int _loop(struct pl330_dmac *pl330, unsigned dry_run, u8 buf[],
1234 unsigned long *bursts, const struct _xfer_spec *pxs)
1236 int cyc, cycmax, szlp, szlpend, szbrst, off;
1237 unsigned lcnt0, lcnt1, ljmp0, ljmp1;
1238 struct _arg_LPEND lpend;
1240 if (*bursts == 1)
1241 return _bursts(pl330, dry_run, buf, pxs, 1);
1243 /* Max iterations possible in DMALP is 256 */
1244 if (*bursts >= 256*256) {
1245 lcnt1 = 256;
1246 lcnt0 = 256;
1247 cyc = *bursts / lcnt1 / lcnt0;
1248 } else if (*bursts > 256) {
1249 lcnt1 = 256;
1250 lcnt0 = *bursts / lcnt1;
1251 cyc = 1;
1252 } else {
1253 lcnt1 = *bursts;
1254 lcnt0 = 0;
1255 cyc = 1;
1258 szlp = _emit_LP(1, buf, 0, 0);
1259 szbrst = _bursts(pl330, 1, buf, pxs, 1);
1261 lpend.cond = ALWAYS;
1262 lpend.forever = false;
1263 lpend.loop = 0;
1264 lpend.bjump = 0;
1265 szlpend = _emit_LPEND(1, buf, &lpend);
1267 if (lcnt0) {
1268 szlp *= 2;
1269 szlpend *= 2;
1273 * Max bursts that we can unroll due to limit on the
1274 * size of backward jump that can be encoded in DMALPEND
1275 * which is 8-bits and hence 255
1277 cycmax = (255 - (szlp + szlpend)) / szbrst;
1279 cyc = (cycmax < cyc) ? cycmax : cyc;
1281 off = 0;
1283 if (lcnt0) {
1284 off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
1285 ljmp0 = off;
1288 off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
1289 ljmp1 = off;
1291 off += _bursts(pl330, dry_run, &buf[off], pxs, cyc);
1293 lpend.cond = ALWAYS;
1294 lpend.forever = false;
1295 lpend.loop = 1;
1296 lpend.bjump = off - ljmp1;
1297 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1299 if (lcnt0) {
1300 lpend.cond = ALWAYS;
1301 lpend.forever = false;
1302 lpend.loop = 0;
1303 lpend.bjump = off - ljmp0;
1304 off += _emit_LPEND(dry_run, &buf[off], &lpend);
1307 *bursts = lcnt1 * cyc;
1308 if (lcnt0)
1309 *bursts *= lcnt0;
1311 return off;
1314 static inline int _setup_loops(struct pl330_dmac *pl330,
1315 unsigned dry_run, u8 buf[],
1316 const struct _xfer_spec *pxs)
1318 struct pl330_xfer *x = &pxs->desc->px;
1319 u32 ccr = pxs->ccr;
1320 unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
1321 int off = 0;
1323 while (bursts) {
1324 c = bursts;
1325 off += _loop(pl330, dry_run, &buf[off], &c, pxs);
1326 bursts -= c;
1329 return off;
1332 static inline int _setup_xfer(struct pl330_dmac *pl330,
1333 unsigned dry_run, u8 buf[],
1334 const struct _xfer_spec *pxs)
1336 struct pl330_xfer *x = &pxs->desc->px;
1337 int off = 0;
1339 /* DMAMOV SAR, x->src_addr */
1340 off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
1341 /* DMAMOV DAR, x->dst_addr */
1342 off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
1344 /* Setup Loop(s) */
1345 off += _setup_loops(pl330, dry_run, &buf[off], pxs);
1347 return off;
1351 * A req is a sequence of one or more xfer units.
1352 * Returns the number of bytes taken to setup the MC for the req.
1354 static int _setup_req(struct pl330_dmac *pl330, unsigned dry_run,
1355 struct pl330_thread *thrd, unsigned index,
1356 struct _xfer_spec *pxs)
1358 struct _pl330_req *req = &thrd->req[index];
1359 struct pl330_xfer *x;
1360 u8 *buf = req->mc_cpu;
1361 int off = 0;
1363 PL330_DBGMC_START(req->mc_bus);
1365 /* DMAMOV CCR, ccr */
1366 off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
1368 x = &pxs->desc->px;
1369 /* Error if xfer length is not aligned at burst size */
1370 if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
1371 return -EINVAL;
1373 off += _setup_xfer(pl330, dry_run, &buf[off], pxs);
1375 /* DMASEV peripheral/event */
1376 off += _emit_SEV(dry_run, &buf[off], thrd->ev);
1377 /* DMAEND */
1378 off += _emit_END(dry_run, &buf[off]);
1380 return off;
1383 static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
1385 u32 ccr = 0;
1387 if (rqc->src_inc)
1388 ccr |= CC_SRCINC;
1390 if (rqc->dst_inc)
1391 ccr |= CC_DSTINC;
1393 /* We set same protection levels for Src and DST for now */
1394 if (rqc->privileged)
1395 ccr |= CC_SRCPRI | CC_DSTPRI;
1396 if (rqc->nonsecure)
1397 ccr |= CC_SRCNS | CC_DSTNS;
1398 if (rqc->insnaccess)
1399 ccr |= CC_SRCIA | CC_DSTIA;
1401 ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
1402 ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
1404 ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
1405 ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
1407 ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
1408 ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
1410 ccr |= (rqc->swap << CC_SWAP_SHFT);
1412 return ccr;
1416 * Submit a list of xfers after which the client wants notification.
1417 * Client is not notified after each xfer unit, just once after all
1418 * xfer units are done or some error occurs.
1420 static int pl330_submit_req(struct pl330_thread *thrd,
1421 struct dma_pl330_desc *desc)
1423 struct pl330_dmac *pl330 = thrd->dmac;
1424 struct _xfer_spec xs;
1425 unsigned long flags;
1426 unsigned idx;
1427 u32 ccr;
1428 int ret = 0;
1430 if (pl330->state == DYING
1431 || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
1432 dev_info(thrd->dmac->ddma.dev, "%s:%d\n",
1433 __func__, __LINE__);
1434 return -EAGAIN;
1437 /* If request for non-existing peripheral */
1438 if (desc->rqtype != DMA_MEM_TO_MEM &&
1439 desc->peri >= pl330->pcfg.num_peri) {
1440 dev_info(thrd->dmac->ddma.dev,
1441 "%s:%d Invalid peripheral(%u)!\n",
1442 __func__, __LINE__, desc->peri);
1443 return -EINVAL;
1446 spin_lock_irqsave(&pl330->lock, flags);
1448 if (_queue_full(thrd)) {
1449 ret = -EAGAIN;
1450 goto xfer_exit;
1453 /* Prefer Secure Channel */
1454 if (!_manager_ns(thrd))
1455 desc->rqcfg.nonsecure = 0;
1456 else
1457 desc->rqcfg.nonsecure = 1;
1459 ccr = _prepare_ccr(&desc->rqcfg);
1461 idx = thrd->req[0].desc == NULL ? 0 : 1;
1463 xs.ccr = ccr;
1464 xs.desc = desc;
1466 /* First dry run to check if req is acceptable */
1467 ret = _setup_req(pl330, 1, thrd, idx, &xs);
1468 if (ret < 0)
1469 goto xfer_exit;
1471 if (ret > pl330->mcbufsz / 2) {
1472 dev_info(pl330->ddma.dev, "%s:%d Try increasing mcbufsz (%i/%i)\n",
1473 __func__, __LINE__, ret, pl330->mcbufsz / 2);
1474 ret = -ENOMEM;
1475 goto xfer_exit;
1478 /* Hook the request */
1479 thrd->lstenq = idx;
1480 thrd->req[idx].desc = desc;
1481 _setup_req(pl330, 0, thrd, idx, &xs);
1483 ret = 0;
1485 xfer_exit:
1486 spin_unlock_irqrestore(&pl330->lock, flags);
1488 return ret;
1491 static void dma_pl330_rqcb(struct dma_pl330_desc *desc, enum pl330_op_err err)
1493 struct dma_pl330_chan *pch;
1494 unsigned long flags;
1496 if (!desc)
1497 return;
1499 pch = desc->pchan;
1501 /* If desc aborted */
1502 if (!pch)
1503 return;
1505 spin_lock_irqsave(&pch->lock, flags);
1507 desc->status = DONE;
1509 spin_unlock_irqrestore(&pch->lock, flags);
1511 tasklet_schedule(&pch->task);
1514 static void pl330_dotask(unsigned long data)
1516 struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
1517 unsigned long flags;
1518 int i;
1520 spin_lock_irqsave(&pl330->lock, flags);
1522 /* The DMAC itself gone nuts */
1523 if (pl330->dmac_tbd.reset_dmac) {
1524 pl330->state = DYING;
1525 /* Reset the manager too */
1526 pl330->dmac_tbd.reset_mngr = true;
1527 /* Clear the reset flag */
1528 pl330->dmac_tbd.reset_dmac = false;
1531 if (pl330->dmac_tbd.reset_mngr) {
1532 _stop(pl330->manager);
1533 /* Reset all channels */
1534 pl330->dmac_tbd.reset_chan = (1 << pl330->pcfg.num_chan) - 1;
1535 /* Clear the reset flag */
1536 pl330->dmac_tbd.reset_mngr = false;
1539 for (i = 0; i < pl330->pcfg.num_chan; i++) {
1541 if (pl330->dmac_tbd.reset_chan & (1 << i)) {
1542 struct pl330_thread *thrd = &pl330->channels[i];
1543 void __iomem *regs = pl330->base;
1544 enum pl330_op_err err;
1546 _stop(thrd);
1548 if (readl(regs + FSC) & (1 << thrd->id))
1549 err = PL330_ERR_FAIL;
1550 else
1551 err = PL330_ERR_ABORT;
1553 spin_unlock_irqrestore(&pl330->lock, flags);
1554 dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, err);
1555 dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, err);
1556 spin_lock_irqsave(&pl330->lock, flags);
1558 thrd->req[0].desc = NULL;
1559 thrd->req[1].desc = NULL;
1560 thrd->req_running = -1;
1562 /* Clear the reset flag */
1563 pl330->dmac_tbd.reset_chan &= ~(1 << i);
1567 spin_unlock_irqrestore(&pl330->lock, flags);
1569 return;
1572 /* Returns 1 if state was updated, 0 otherwise */
1573 static int pl330_update(struct pl330_dmac *pl330)
1575 struct dma_pl330_desc *descdone, *tmp;
1576 unsigned long flags;
1577 void __iomem *regs;
1578 u32 val;
1579 int id, ev, ret = 0;
1581 regs = pl330->base;
1583 spin_lock_irqsave(&pl330->lock, flags);
1585 val = readl(regs + FSM) & 0x1;
1586 if (val)
1587 pl330->dmac_tbd.reset_mngr = true;
1588 else
1589 pl330->dmac_tbd.reset_mngr = false;
1591 val = readl(regs + FSC) & ((1 << pl330->pcfg.num_chan) - 1);
1592 pl330->dmac_tbd.reset_chan |= val;
1593 if (val) {
1594 int i = 0;
1595 while (i < pl330->pcfg.num_chan) {
1596 if (val & (1 << i)) {
1597 dev_info(pl330->ddma.dev,
1598 "Reset Channel-%d\t CS-%x FTC-%x\n",
1599 i, readl(regs + CS(i)),
1600 readl(regs + FTC(i)));
1601 _stop(&pl330->channels[i]);
1603 i++;
1607 /* Check which event happened i.e, thread notified */
1608 val = readl(regs + ES);
1609 if (pl330->pcfg.num_events < 32
1610 && val & ~((1 << pl330->pcfg.num_events) - 1)) {
1611 pl330->dmac_tbd.reset_dmac = true;
1612 dev_err(pl330->ddma.dev, "%s:%d Unexpected!\n", __func__,
1613 __LINE__);
1614 ret = 1;
1615 goto updt_exit;
1618 for (ev = 0; ev < pl330->pcfg.num_events; ev++) {
1619 if (val & (1 << ev)) { /* Event occurred */
1620 struct pl330_thread *thrd;
1621 u32 inten = readl(regs + INTEN);
1622 int active;
1624 /* Clear the event */
1625 if (inten & (1 << ev))
1626 writel(1 << ev, regs + INTCLR);
1628 ret = 1;
1630 id = pl330->events[ev];
1632 thrd = &pl330->channels[id];
1634 active = thrd->req_running;
1635 if (active == -1) /* Aborted */
1636 continue;
1638 /* Detach the req */
1639 descdone = thrd->req[active].desc;
1640 thrd->req[active].desc = NULL;
1642 thrd->req_running = -1;
1644 /* Get going again ASAP */
1645 _start(thrd);
1647 /* For now, just make a list of callbacks to be done */
1648 list_add_tail(&descdone->rqd, &pl330->req_done);
1652 /* Now that we are in no hurry, do the callbacks */
1653 list_for_each_entry_safe(descdone, tmp, &pl330->req_done, rqd) {
1654 list_del(&descdone->rqd);
1655 spin_unlock_irqrestore(&pl330->lock, flags);
1656 dma_pl330_rqcb(descdone, PL330_ERR_NONE);
1657 spin_lock_irqsave(&pl330->lock, flags);
1660 updt_exit:
1661 spin_unlock_irqrestore(&pl330->lock, flags);
1663 if (pl330->dmac_tbd.reset_dmac
1664 || pl330->dmac_tbd.reset_mngr
1665 || pl330->dmac_tbd.reset_chan) {
1666 ret = 1;
1667 tasklet_schedule(&pl330->tasks);
1670 return ret;
1673 /* Reserve an event */
1674 static inline int _alloc_event(struct pl330_thread *thrd)
1676 struct pl330_dmac *pl330 = thrd->dmac;
1677 int ev;
1679 for (ev = 0; ev < pl330->pcfg.num_events; ev++)
1680 if (pl330->events[ev] == -1) {
1681 pl330->events[ev] = thrd->id;
1682 return ev;
1685 return -1;
1688 static bool _chan_ns(const struct pl330_dmac *pl330, int i)
1690 return pl330->pcfg.irq_ns & (1 << i);
1693 /* Upon success, returns IdentityToken for the
1694 * allocated channel, NULL otherwise.
1696 static struct pl330_thread *pl330_request_channel(struct pl330_dmac *pl330)
1698 struct pl330_thread *thrd = NULL;
1699 unsigned long flags;
1700 int chans, i;
1702 if (pl330->state == DYING)
1703 return NULL;
1705 chans = pl330->pcfg.num_chan;
1707 spin_lock_irqsave(&pl330->lock, flags);
1709 for (i = 0; i < chans; i++) {
1710 thrd = &pl330->channels[i];
1711 if ((thrd->free) && (!_manager_ns(thrd) ||
1712 _chan_ns(pl330, i))) {
1713 thrd->ev = _alloc_event(thrd);
1714 if (thrd->ev >= 0) {
1715 thrd->free = false;
1716 thrd->lstenq = 1;
1717 thrd->req[0].desc = NULL;
1718 thrd->req[1].desc = NULL;
1719 thrd->req_running = -1;
1720 break;
1723 thrd = NULL;
1726 spin_unlock_irqrestore(&pl330->lock, flags);
1728 return thrd;
1731 /* Release an event */
1732 static inline void _free_event(struct pl330_thread *thrd, int ev)
1734 struct pl330_dmac *pl330 = thrd->dmac;
1736 /* If the event is valid and was held by the thread */
1737 if (ev >= 0 && ev < pl330->pcfg.num_events
1738 && pl330->events[ev] == thrd->id)
1739 pl330->events[ev] = -1;
1742 static void pl330_release_channel(struct pl330_thread *thrd)
1744 struct pl330_dmac *pl330;
1745 unsigned long flags;
1747 if (!thrd || thrd->free)
1748 return;
1750 _stop(thrd);
1752 dma_pl330_rqcb(thrd->req[1 - thrd->lstenq].desc, PL330_ERR_ABORT);
1753 dma_pl330_rqcb(thrd->req[thrd->lstenq].desc, PL330_ERR_ABORT);
1755 pl330 = thrd->dmac;
1757 spin_lock_irqsave(&pl330->lock, flags);
1758 _free_event(thrd, thrd->ev);
1759 thrd->free = true;
1760 spin_unlock_irqrestore(&pl330->lock, flags);
1763 /* Initialize the structure for PL330 configuration, that can be used
1764 * by the client driver the make best use of the DMAC
1766 static void read_dmac_config(struct pl330_dmac *pl330)
1768 void __iomem *regs = pl330->base;
1769 u32 val;
1771 val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
1772 val &= CRD_DATA_WIDTH_MASK;
1773 pl330->pcfg.data_bus_width = 8 * (1 << val);
1775 val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
1776 val &= CRD_DATA_BUFF_MASK;
1777 pl330->pcfg.data_buf_dep = val + 1;
1779 val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
1780 val &= CR0_NUM_CHANS_MASK;
1781 val += 1;
1782 pl330->pcfg.num_chan = val;
1784 val = readl(regs + CR0);
1785 if (val & CR0_PERIPH_REQ_SET) {
1786 val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
1787 val += 1;
1788 pl330->pcfg.num_peri = val;
1789 pl330->pcfg.peri_ns = readl(regs + CR4);
1790 } else {
1791 pl330->pcfg.num_peri = 0;
1794 val = readl(regs + CR0);
1795 if (val & CR0_BOOT_MAN_NS)
1796 pl330->pcfg.mode |= DMAC_MODE_NS;
1797 else
1798 pl330->pcfg.mode &= ~DMAC_MODE_NS;
1800 val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
1801 val &= CR0_NUM_EVENTS_MASK;
1802 val += 1;
1803 pl330->pcfg.num_events = val;
1805 pl330->pcfg.irq_ns = readl(regs + CR3);
1808 static inline void _reset_thread(struct pl330_thread *thrd)
1810 struct pl330_dmac *pl330 = thrd->dmac;
1812 thrd->req[0].mc_cpu = pl330->mcode_cpu
1813 + (thrd->id * pl330->mcbufsz);
1814 thrd->req[0].mc_bus = pl330->mcode_bus
1815 + (thrd->id * pl330->mcbufsz);
1816 thrd->req[0].desc = NULL;
1818 thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
1819 + pl330->mcbufsz / 2;
1820 thrd->req[1].mc_bus = thrd->req[0].mc_bus
1821 + pl330->mcbufsz / 2;
1822 thrd->req[1].desc = NULL;
1824 thrd->req_running = -1;
1827 static int dmac_alloc_threads(struct pl330_dmac *pl330)
1829 int chans = pl330->pcfg.num_chan;
1830 struct pl330_thread *thrd;
1831 int i;
1833 /* Allocate 1 Manager and 'chans' Channel threads */
1834 pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
1835 GFP_KERNEL);
1836 if (!pl330->channels)
1837 return -ENOMEM;
1839 /* Init Channel threads */
1840 for (i = 0; i < chans; i++) {
1841 thrd = &pl330->channels[i];
1842 thrd->id = i;
1843 thrd->dmac = pl330;
1844 _reset_thread(thrd);
1845 thrd->free = true;
1848 /* MANAGER is indexed at the end */
1849 thrd = &pl330->channels[chans];
1850 thrd->id = chans;
1851 thrd->dmac = pl330;
1852 thrd->free = false;
1853 pl330->manager = thrd;
1855 return 0;
1858 static int dmac_alloc_resources(struct pl330_dmac *pl330)
1860 int chans = pl330->pcfg.num_chan;
1861 int ret;
1864 * Alloc MicroCode buffer for 'chans' Channel threads.
1865 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
1867 pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev,
1868 chans * pl330->mcbufsz,
1869 &pl330->mcode_bus, GFP_KERNEL);
1870 if (!pl330->mcode_cpu) {
1871 dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
1872 __func__, __LINE__);
1873 return -ENOMEM;
1876 ret = dmac_alloc_threads(pl330);
1877 if (ret) {
1878 dev_err(pl330->ddma.dev, "%s:%d Can't to create channels for DMAC!\n",
1879 __func__, __LINE__);
1880 dma_free_coherent(pl330->ddma.dev,
1881 chans * pl330->mcbufsz,
1882 pl330->mcode_cpu, pl330->mcode_bus);
1883 return ret;
1886 return 0;
1889 static int pl330_add(struct pl330_dmac *pl330)
1891 int i, ret;
1893 /* Check if we can handle this DMAC */
1894 if ((pl330->pcfg.periph_id & 0xfffff) != PERIPH_ID_VAL) {
1895 dev_err(pl330->ddma.dev, "PERIPH_ID 0x%x !\n",
1896 pl330->pcfg.periph_id);
1897 return -EINVAL;
1900 /* Read the configuration of the DMAC */
1901 read_dmac_config(pl330);
1903 if (pl330->pcfg.num_events == 0) {
1904 dev_err(pl330->ddma.dev, "%s:%d Can't work without events!\n",
1905 __func__, __LINE__);
1906 return -EINVAL;
1909 spin_lock_init(&pl330->lock);
1911 INIT_LIST_HEAD(&pl330->req_done);
1913 /* Use default MC buffer size if not provided */
1914 if (!pl330->mcbufsz)
1915 pl330->mcbufsz = MCODE_BUFF_PER_REQ * 2;
1917 /* Mark all events as free */
1918 for (i = 0; i < pl330->pcfg.num_events; i++)
1919 pl330->events[i] = -1;
1921 /* Allocate resources needed by the DMAC */
1922 ret = dmac_alloc_resources(pl330);
1923 if (ret) {
1924 dev_err(pl330->ddma.dev, "Unable to create channels for DMAC\n");
1925 return ret;
1928 tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
1930 pl330->state = INIT;
1932 return 0;
1935 static int dmac_free_threads(struct pl330_dmac *pl330)
1937 struct pl330_thread *thrd;
1938 int i;
1940 /* Release Channel threads */
1941 for (i = 0; i < pl330->pcfg.num_chan; i++) {
1942 thrd = &pl330->channels[i];
1943 pl330_release_channel(thrd);
1946 /* Free memory */
1947 kfree(pl330->channels);
1949 return 0;
1952 static void pl330_del(struct pl330_dmac *pl330)
1954 pl330->state = UNINIT;
1956 tasklet_kill(&pl330->tasks);
1958 /* Free DMAC resources */
1959 dmac_free_threads(pl330);
1961 dma_free_coherent(pl330->ddma.dev,
1962 pl330->pcfg.num_chan * pl330->mcbufsz, pl330->mcode_cpu,
1963 pl330->mcode_bus);
1966 /* forward declaration */
1967 static struct amba_driver pl330_driver;
1969 static inline struct dma_pl330_chan *
1970 to_pchan(struct dma_chan *ch)
1972 if (!ch)
1973 return NULL;
1975 return container_of(ch, struct dma_pl330_chan, chan);
1978 static inline struct dma_pl330_desc *
1979 to_desc(struct dma_async_tx_descriptor *tx)
1981 return container_of(tx, struct dma_pl330_desc, txd);
1984 static inline void fill_queue(struct dma_pl330_chan *pch)
1986 struct dma_pl330_desc *desc;
1987 int ret;
1989 list_for_each_entry(desc, &pch->work_list, node) {
1991 /* If already submitted */
1992 if (desc->status == BUSY)
1993 continue;
1995 ret = pl330_submit_req(pch->thread, desc);
1996 if (!ret) {
1997 desc->status = BUSY;
1998 } else if (ret == -EAGAIN) {
1999 /* QFull or DMAC Dying */
2000 break;
2001 } else {
2002 /* Unacceptable request */
2003 desc->status = DONE;
2004 dev_err(pch->dmac->ddma.dev, "%s:%d Bad Desc(%d)\n",
2005 __func__, __LINE__, desc->txd.cookie);
2006 tasklet_schedule(&pch->task);
2011 static void pl330_tasklet(unsigned long data)
2013 struct dma_pl330_chan *pch = (struct dma_pl330_chan *)data;
2014 struct dma_pl330_desc *desc, *_dt;
2015 unsigned long flags;
2016 bool power_down = false;
2018 spin_lock_irqsave(&pch->lock, flags);
2020 /* Pick up ripe tomatoes */
2021 list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
2022 if (desc->status == DONE) {
2023 if (!pch->cyclic)
2024 dma_cookie_complete(&desc->txd);
2025 list_move_tail(&desc->node, &pch->completed_list);
2028 /* Try to submit a req imm. next to the last completed cookie */
2029 fill_queue(pch);
2031 if (list_empty(&pch->work_list)) {
2032 spin_lock(&pch->thread->dmac->lock);
2033 _stop(pch->thread);
2034 spin_unlock(&pch->thread->dmac->lock);
2035 power_down = true;
2036 } else {
2037 /* Make sure the PL330 Channel thread is active */
2038 spin_lock(&pch->thread->dmac->lock);
2039 _start(pch->thread);
2040 spin_unlock(&pch->thread->dmac->lock);
2043 while (!list_empty(&pch->completed_list)) {
2044 struct dmaengine_desc_callback cb;
2046 desc = list_first_entry(&pch->completed_list,
2047 struct dma_pl330_desc, node);
2049 dmaengine_desc_get_callback(&desc->txd, &cb);
2051 if (pch->cyclic) {
2052 desc->status = PREP;
2053 list_move_tail(&desc->node, &pch->work_list);
2054 if (power_down) {
2055 spin_lock(&pch->thread->dmac->lock);
2056 _start(pch->thread);
2057 spin_unlock(&pch->thread->dmac->lock);
2058 power_down = false;
2060 } else {
2061 desc->status = FREE;
2062 list_move_tail(&desc->node, &pch->dmac->desc_pool);
2065 dma_descriptor_unmap(&desc->txd);
2067 if (dmaengine_desc_callback_valid(&cb)) {
2068 spin_unlock_irqrestore(&pch->lock, flags);
2069 dmaengine_desc_callback_invoke(&cb, NULL);
2070 spin_lock_irqsave(&pch->lock, flags);
2073 spin_unlock_irqrestore(&pch->lock, flags);
2075 /* If work list empty, power down */
2076 if (power_down) {
2077 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2078 pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2082 bool pl330_filter(struct dma_chan *chan, void *param)
2084 u8 *peri_id;
2086 if (chan->device->dev->driver != &pl330_driver.drv)
2087 return false;
2089 peri_id = chan->private;
2090 return *peri_id == (unsigned long)param;
2092 EXPORT_SYMBOL(pl330_filter);
2094 static struct dma_chan *of_dma_pl330_xlate(struct of_phandle_args *dma_spec,
2095 struct of_dma *ofdma)
2097 int count = dma_spec->args_count;
2098 struct pl330_dmac *pl330 = ofdma->of_dma_data;
2099 unsigned int chan_id;
2101 if (!pl330)
2102 return NULL;
2104 if (count != 1)
2105 return NULL;
2107 chan_id = dma_spec->args[0];
2108 if (chan_id >= pl330->num_peripherals)
2109 return NULL;
2111 return dma_get_slave_channel(&pl330->peripherals[chan_id].chan);
2114 static int pl330_alloc_chan_resources(struct dma_chan *chan)
2116 struct dma_pl330_chan *pch = to_pchan(chan);
2117 struct pl330_dmac *pl330 = pch->dmac;
2118 unsigned long flags;
2120 spin_lock_irqsave(&pch->lock, flags);
2122 dma_cookie_init(chan);
2123 pch->cyclic = false;
2125 pch->thread = pl330_request_channel(pl330);
2126 if (!pch->thread) {
2127 spin_unlock_irqrestore(&pch->lock, flags);
2128 return -ENOMEM;
2131 tasklet_init(&pch->task, pl330_tasklet, (unsigned long) pch);
2133 spin_unlock_irqrestore(&pch->lock, flags);
2135 return 1;
2138 static int pl330_config(struct dma_chan *chan,
2139 struct dma_slave_config *slave_config)
2141 struct dma_pl330_chan *pch = to_pchan(chan);
2143 if (slave_config->direction == DMA_MEM_TO_DEV) {
2144 if (slave_config->dst_addr)
2145 pch->fifo_addr = slave_config->dst_addr;
2146 if (slave_config->dst_addr_width)
2147 pch->burst_sz = __ffs(slave_config->dst_addr_width);
2148 if (slave_config->dst_maxburst)
2149 pch->burst_len = slave_config->dst_maxburst;
2150 } else if (slave_config->direction == DMA_DEV_TO_MEM) {
2151 if (slave_config->src_addr)
2152 pch->fifo_addr = slave_config->src_addr;
2153 if (slave_config->src_addr_width)
2154 pch->burst_sz = __ffs(slave_config->src_addr_width);
2155 if (slave_config->src_maxburst)
2156 pch->burst_len = slave_config->src_maxburst;
2159 return 0;
2162 static int pl330_terminate_all(struct dma_chan *chan)
2164 struct dma_pl330_chan *pch = to_pchan(chan);
2165 struct dma_pl330_desc *desc;
2166 unsigned long flags;
2167 struct pl330_dmac *pl330 = pch->dmac;
2168 LIST_HEAD(list);
2170 pm_runtime_get_sync(pl330->ddma.dev);
2171 spin_lock_irqsave(&pch->lock, flags);
2172 spin_lock(&pl330->lock);
2173 _stop(pch->thread);
2174 spin_unlock(&pl330->lock);
2176 pch->thread->req[0].desc = NULL;
2177 pch->thread->req[1].desc = NULL;
2178 pch->thread->req_running = -1;
2180 /* Mark all desc done */
2181 list_for_each_entry(desc, &pch->submitted_list, node) {
2182 desc->status = FREE;
2183 dma_cookie_complete(&desc->txd);
2186 list_for_each_entry(desc, &pch->work_list , node) {
2187 desc->status = FREE;
2188 dma_cookie_complete(&desc->txd);
2191 list_splice_tail_init(&pch->submitted_list, &pl330->desc_pool);
2192 list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
2193 list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
2194 spin_unlock_irqrestore(&pch->lock, flags);
2195 pm_runtime_mark_last_busy(pl330->ddma.dev);
2196 pm_runtime_put_autosuspend(pl330->ddma.dev);
2198 return 0;
2202 * We don't support DMA_RESUME command because of hardware
2203 * limitations, so after pausing the channel we cannot restore
2204 * it to active state. We have to terminate channel and setup
2205 * DMA transfer again. This pause feature was implemented to
2206 * allow safely read residue before channel termination.
2208 static int pl330_pause(struct dma_chan *chan)
2210 struct dma_pl330_chan *pch = to_pchan(chan);
2211 struct pl330_dmac *pl330 = pch->dmac;
2212 unsigned long flags;
2214 pm_runtime_get_sync(pl330->ddma.dev);
2215 spin_lock_irqsave(&pch->lock, flags);
2217 spin_lock(&pl330->lock);
2218 _stop(pch->thread);
2219 spin_unlock(&pl330->lock);
2221 spin_unlock_irqrestore(&pch->lock, flags);
2222 pm_runtime_mark_last_busy(pl330->ddma.dev);
2223 pm_runtime_put_autosuspend(pl330->ddma.dev);
2225 return 0;
2228 static void pl330_free_chan_resources(struct dma_chan *chan)
2230 struct dma_pl330_chan *pch = to_pchan(chan);
2231 unsigned long flags;
2233 tasklet_kill(&pch->task);
2235 pm_runtime_get_sync(pch->dmac->ddma.dev);
2236 spin_lock_irqsave(&pch->lock, flags);
2238 pl330_release_channel(pch->thread);
2239 pch->thread = NULL;
2241 if (pch->cyclic)
2242 list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool);
2244 spin_unlock_irqrestore(&pch->lock, flags);
2245 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2246 pm_runtime_put_autosuspend(pch->dmac->ddma.dev);
2249 static int pl330_get_current_xferred_count(struct dma_pl330_chan *pch,
2250 struct dma_pl330_desc *desc)
2252 struct pl330_thread *thrd = pch->thread;
2253 struct pl330_dmac *pl330 = pch->dmac;
2254 void __iomem *regs = thrd->dmac->base;
2255 u32 val, addr;
2257 pm_runtime_get_sync(pl330->ddma.dev);
2258 val = addr = 0;
2259 if (desc->rqcfg.src_inc) {
2260 val = readl(regs + SA(thrd->id));
2261 addr = desc->px.src_addr;
2262 } else {
2263 val = readl(regs + DA(thrd->id));
2264 addr = desc->px.dst_addr;
2266 pm_runtime_mark_last_busy(pch->dmac->ddma.dev);
2267 pm_runtime_put_autosuspend(pl330->ddma.dev);
2269 /* If DMAMOV hasn't finished yet, SAR/DAR can be zero */
2270 if (!val)
2271 return 0;
2273 return val - addr;
2276 static enum dma_status
2277 pl330_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
2278 struct dma_tx_state *txstate)
2280 enum dma_status ret;
2281 unsigned long flags;
2282 struct dma_pl330_desc *desc, *running = NULL, *last_enq = NULL;
2283 struct dma_pl330_chan *pch = to_pchan(chan);
2284 unsigned int transferred, residual = 0;
2286 ret = dma_cookie_status(chan, cookie, txstate);
2288 if (!txstate)
2289 return ret;
2291 if (ret == DMA_COMPLETE)
2292 goto out;
2294 spin_lock_irqsave(&pch->lock, flags);
2295 spin_lock(&pch->thread->dmac->lock);
2297 if (pch->thread->req_running != -1)
2298 running = pch->thread->req[pch->thread->req_running].desc;
2300 last_enq = pch->thread->req[pch->thread->lstenq].desc;
2302 /* Check in pending list */
2303 list_for_each_entry(desc, &pch->work_list, node) {
2304 if (desc->status == DONE)
2305 transferred = desc->bytes_requested;
2306 else if (running && desc == running)
2307 transferred =
2308 pl330_get_current_xferred_count(pch, desc);
2309 else if (desc->status == BUSY)
2311 * Busy but not running means either just enqueued,
2312 * or finished and not yet marked done
2314 if (desc == last_enq)
2315 transferred = 0;
2316 else
2317 transferred = desc->bytes_requested;
2318 else
2319 transferred = 0;
2320 residual += desc->bytes_requested - transferred;
2321 if (desc->txd.cookie == cookie) {
2322 switch (desc->status) {
2323 case DONE:
2324 ret = DMA_COMPLETE;
2325 break;
2326 case PREP:
2327 case BUSY:
2328 ret = DMA_IN_PROGRESS;
2329 break;
2330 default:
2331 WARN_ON(1);
2333 break;
2335 if (desc->last)
2336 residual = 0;
2338 spin_unlock(&pch->thread->dmac->lock);
2339 spin_unlock_irqrestore(&pch->lock, flags);
2341 out:
2342 dma_set_residue(txstate, residual);
2344 return ret;
2347 static void pl330_issue_pending(struct dma_chan *chan)
2349 struct dma_pl330_chan *pch = to_pchan(chan);
2350 unsigned long flags;
2352 spin_lock_irqsave(&pch->lock, flags);
2353 if (list_empty(&pch->work_list)) {
2355 * Warn on nothing pending. Empty submitted_list may
2356 * break our pm_runtime usage counter as it is
2357 * updated on work_list emptiness status.
2359 WARN_ON(list_empty(&pch->submitted_list));
2360 pm_runtime_get_sync(pch->dmac->ddma.dev);
2362 list_splice_tail_init(&pch->submitted_list, &pch->work_list);
2363 spin_unlock_irqrestore(&pch->lock, flags);
2365 pl330_tasklet((unsigned long)pch);
2369 * We returned the last one of the circular list of descriptor(s)
2370 * from prep_xxx, so the argument to submit corresponds to the last
2371 * descriptor of the list.
2373 static dma_cookie_t pl330_tx_submit(struct dma_async_tx_descriptor *tx)
2375 struct dma_pl330_desc *desc, *last = to_desc(tx);
2376 struct dma_pl330_chan *pch = to_pchan(tx->chan);
2377 dma_cookie_t cookie;
2378 unsigned long flags;
2380 spin_lock_irqsave(&pch->lock, flags);
2382 /* Assign cookies to all nodes */
2383 while (!list_empty(&last->node)) {
2384 desc = list_entry(last->node.next, struct dma_pl330_desc, node);
2385 if (pch->cyclic) {
2386 desc->txd.callback = last->txd.callback;
2387 desc->txd.callback_param = last->txd.callback_param;
2389 desc->last = false;
2391 dma_cookie_assign(&desc->txd);
2393 list_move_tail(&desc->node, &pch->submitted_list);
2396 last->last = true;
2397 cookie = dma_cookie_assign(&last->txd);
2398 list_add_tail(&last->node, &pch->submitted_list);
2399 spin_unlock_irqrestore(&pch->lock, flags);
2401 return cookie;
2404 static inline void _init_desc(struct dma_pl330_desc *desc)
2406 desc->rqcfg.swap = SWAP_NO;
2407 desc->rqcfg.scctl = CCTRL0;
2408 desc->rqcfg.dcctl = CCTRL0;
2409 desc->txd.tx_submit = pl330_tx_submit;
2411 INIT_LIST_HEAD(&desc->node);
2414 /* Returns the number of descriptors added to the DMAC pool */
2415 static int add_desc(struct pl330_dmac *pl330, gfp_t flg, int count)
2417 struct dma_pl330_desc *desc;
2418 unsigned long flags;
2419 int i;
2421 desc = kcalloc(count, sizeof(*desc), flg);
2422 if (!desc)
2423 return 0;
2425 spin_lock_irqsave(&pl330->pool_lock, flags);
2427 for (i = 0; i < count; i++) {
2428 _init_desc(&desc[i]);
2429 list_add_tail(&desc[i].node, &pl330->desc_pool);
2432 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2434 return count;
2437 static struct dma_pl330_desc *pluck_desc(struct pl330_dmac *pl330)
2439 struct dma_pl330_desc *desc = NULL;
2440 unsigned long flags;
2442 spin_lock_irqsave(&pl330->pool_lock, flags);
2444 if (!list_empty(&pl330->desc_pool)) {
2445 desc = list_entry(pl330->desc_pool.next,
2446 struct dma_pl330_desc, node);
2448 list_del_init(&desc->node);
2450 desc->status = PREP;
2451 desc->txd.callback = NULL;
2454 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2456 return desc;
2459 static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
2461 struct pl330_dmac *pl330 = pch->dmac;
2462 u8 *peri_id = pch->chan.private;
2463 struct dma_pl330_desc *desc;
2465 /* Pluck one desc from the pool of DMAC */
2466 desc = pluck_desc(pl330);
2468 /* If the DMAC pool is empty, alloc new */
2469 if (!desc) {
2470 if (!add_desc(pl330, GFP_ATOMIC, 1))
2471 return NULL;
2473 /* Try again */
2474 desc = pluck_desc(pl330);
2475 if (!desc) {
2476 dev_err(pch->dmac->ddma.dev,
2477 "%s:%d ALERT!\n", __func__, __LINE__);
2478 return NULL;
2482 /* Initialize the descriptor */
2483 desc->pchan = pch;
2484 desc->txd.cookie = 0;
2485 async_tx_ack(&desc->txd);
2487 desc->peri = peri_id ? pch->chan.chan_id : 0;
2488 desc->rqcfg.pcfg = &pch->dmac->pcfg;
2490 dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
2492 return desc;
2495 static inline void fill_px(struct pl330_xfer *px,
2496 dma_addr_t dst, dma_addr_t src, size_t len)
2498 px->bytes = len;
2499 px->dst_addr = dst;
2500 px->src_addr = src;
2503 static struct dma_pl330_desc *
2504 __pl330_prep_dma_memcpy(struct dma_pl330_chan *pch, dma_addr_t dst,
2505 dma_addr_t src, size_t len)
2507 struct dma_pl330_desc *desc = pl330_get_desc(pch);
2509 if (!desc) {
2510 dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2511 __func__, __LINE__);
2512 return NULL;
2516 * Ideally we should lookout for reqs bigger than
2517 * those that can be programmed with 256 bytes of
2518 * MC buffer, but considering a req size is seldom
2519 * going to be word-unaligned and more than 200MB,
2520 * we take it easy.
2521 * Also, should the limit is reached we'd rather
2522 * have the platform increase MC buffer size than
2523 * complicating this API driver.
2525 fill_px(&desc->px, dst, src, len);
2527 return desc;
2530 /* Call after fixing burst size */
2531 static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
2533 struct dma_pl330_chan *pch = desc->pchan;
2534 struct pl330_dmac *pl330 = pch->dmac;
2535 int burst_len;
2537 burst_len = pl330->pcfg.data_bus_width / 8;
2538 burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
2539 burst_len >>= desc->rqcfg.brst_size;
2541 /* src/dst_burst_len can't be more than 16 */
2542 if (burst_len > 16)
2543 burst_len = 16;
2545 while (burst_len > 1) {
2546 if (!(len % (burst_len << desc->rqcfg.brst_size)))
2547 break;
2548 burst_len--;
2551 return burst_len;
2554 static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic(
2555 struct dma_chan *chan, dma_addr_t dma_addr, size_t len,
2556 size_t period_len, enum dma_transfer_direction direction,
2557 unsigned long flags)
2559 struct dma_pl330_desc *desc = NULL, *first = NULL;
2560 struct dma_pl330_chan *pch = to_pchan(chan);
2561 struct pl330_dmac *pl330 = pch->dmac;
2562 unsigned int i;
2563 dma_addr_t dst;
2564 dma_addr_t src;
2566 if (len % period_len != 0)
2567 return NULL;
2569 if (!is_slave_direction(direction)) {
2570 dev_err(pch->dmac->ddma.dev, "%s:%d Invalid dma direction\n",
2571 __func__, __LINE__);
2572 return NULL;
2575 for (i = 0; i < len / period_len; i++) {
2576 desc = pl330_get_desc(pch);
2577 if (!desc) {
2578 dev_err(pch->dmac->ddma.dev, "%s:%d Unable to fetch desc\n",
2579 __func__, __LINE__);
2581 if (!first)
2582 return NULL;
2584 spin_lock_irqsave(&pl330->pool_lock, flags);
2586 while (!list_empty(&first->node)) {
2587 desc = list_entry(first->node.next,
2588 struct dma_pl330_desc, node);
2589 list_move_tail(&desc->node, &pl330->desc_pool);
2592 list_move_tail(&first->node, &pl330->desc_pool);
2594 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2596 return NULL;
2599 switch (direction) {
2600 case DMA_MEM_TO_DEV:
2601 desc->rqcfg.src_inc = 1;
2602 desc->rqcfg.dst_inc = 0;
2603 src = dma_addr;
2604 dst = pch->fifo_addr;
2605 break;
2606 case DMA_DEV_TO_MEM:
2607 desc->rqcfg.src_inc = 0;
2608 desc->rqcfg.dst_inc = 1;
2609 src = pch->fifo_addr;
2610 dst = dma_addr;
2611 break;
2612 default:
2613 break;
2616 desc->rqtype = direction;
2617 desc->rqcfg.brst_size = pch->burst_sz;
2618 desc->rqcfg.brst_len = 1;
2619 desc->bytes_requested = period_len;
2620 fill_px(&desc->px, dst, src, period_len);
2622 if (!first)
2623 first = desc;
2624 else
2625 list_add_tail(&desc->node, &first->node);
2627 dma_addr += period_len;
2630 if (!desc)
2631 return NULL;
2633 pch->cyclic = true;
2634 desc->txd.flags = flags;
2636 return &desc->txd;
2639 static struct dma_async_tx_descriptor *
2640 pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
2641 dma_addr_t src, size_t len, unsigned long flags)
2643 struct dma_pl330_desc *desc;
2644 struct dma_pl330_chan *pch = to_pchan(chan);
2645 struct pl330_dmac *pl330;
2646 int burst;
2648 if (unlikely(!pch || !len))
2649 return NULL;
2651 pl330 = pch->dmac;
2653 desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
2654 if (!desc)
2655 return NULL;
2657 desc->rqcfg.src_inc = 1;
2658 desc->rqcfg.dst_inc = 1;
2659 desc->rqtype = DMA_MEM_TO_MEM;
2661 /* Select max possible burst size */
2662 burst = pl330->pcfg.data_bus_width / 8;
2665 * Make sure we use a burst size that aligns with all the memcpy
2666 * parameters because our DMA programming algorithm doesn't cope with
2667 * transfers which straddle an entry in the DMA device's MFIFO.
2669 while ((src | dst | len) & (burst - 1))
2670 burst /= 2;
2672 desc->rqcfg.brst_size = 0;
2673 while (burst != (1 << desc->rqcfg.brst_size))
2674 desc->rqcfg.brst_size++;
2677 * If burst size is smaller than bus width then make sure we only
2678 * transfer one at a time to avoid a burst stradling an MFIFO entry.
2680 if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
2681 desc->rqcfg.brst_len = 1;
2683 desc->rqcfg.brst_len = get_burst_len(desc, len);
2684 desc->bytes_requested = len;
2686 desc->txd.flags = flags;
2688 return &desc->txd;
2691 static void __pl330_giveback_desc(struct pl330_dmac *pl330,
2692 struct dma_pl330_desc *first)
2694 unsigned long flags;
2695 struct dma_pl330_desc *desc;
2697 if (!first)
2698 return;
2700 spin_lock_irqsave(&pl330->pool_lock, flags);
2702 while (!list_empty(&first->node)) {
2703 desc = list_entry(first->node.next,
2704 struct dma_pl330_desc, node);
2705 list_move_tail(&desc->node, &pl330->desc_pool);
2708 list_move_tail(&first->node, &pl330->desc_pool);
2710 spin_unlock_irqrestore(&pl330->pool_lock, flags);
2713 static struct dma_async_tx_descriptor *
2714 pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2715 unsigned int sg_len, enum dma_transfer_direction direction,
2716 unsigned long flg, void *context)
2718 struct dma_pl330_desc *first, *desc = NULL;
2719 struct dma_pl330_chan *pch = to_pchan(chan);
2720 struct scatterlist *sg;
2721 int i;
2722 dma_addr_t addr;
2724 if (unlikely(!pch || !sgl || !sg_len))
2725 return NULL;
2727 addr = pch->fifo_addr;
2729 first = NULL;
2731 for_each_sg(sgl, sg, sg_len, i) {
2733 desc = pl330_get_desc(pch);
2734 if (!desc) {
2735 struct pl330_dmac *pl330 = pch->dmac;
2737 dev_err(pch->dmac->ddma.dev,
2738 "%s:%d Unable to fetch desc\n",
2739 __func__, __LINE__);
2740 __pl330_giveback_desc(pl330, first);
2742 return NULL;
2745 if (!first)
2746 first = desc;
2747 else
2748 list_add_tail(&desc->node, &first->node);
2750 if (direction == DMA_MEM_TO_DEV) {
2751 desc->rqcfg.src_inc = 1;
2752 desc->rqcfg.dst_inc = 0;
2753 fill_px(&desc->px,
2754 addr, sg_dma_address(sg), sg_dma_len(sg));
2755 } else {
2756 desc->rqcfg.src_inc = 0;
2757 desc->rqcfg.dst_inc = 1;
2758 fill_px(&desc->px,
2759 sg_dma_address(sg), addr, sg_dma_len(sg));
2762 desc->rqcfg.brst_size = pch->burst_sz;
2763 desc->rqcfg.brst_len = 1;
2764 desc->rqtype = direction;
2765 desc->bytes_requested = sg_dma_len(sg);
2768 /* Return the last desc in the chain */
2769 desc->txd.flags = flg;
2770 return &desc->txd;
2773 static irqreturn_t pl330_irq_handler(int irq, void *data)
2775 if (pl330_update(data))
2776 return IRQ_HANDLED;
2777 else
2778 return IRQ_NONE;
2781 #define PL330_DMA_BUSWIDTHS \
2782 BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
2783 BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
2784 BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
2785 BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) | \
2786 BIT(DMA_SLAVE_BUSWIDTH_8_BYTES)
2789 * Runtime PM callbacks are provided by amba/bus.c driver.
2791 * It is assumed here that IRQ safe runtime PM is chosen in probe and amba
2792 * bus driver will only disable/enable the clock in runtime PM callbacks.
2794 static int __maybe_unused pl330_suspend(struct device *dev)
2796 struct amba_device *pcdev = to_amba_device(dev);
2798 pm_runtime_disable(dev);
2800 if (!pm_runtime_status_suspended(dev)) {
2801 /* amba did not disable the clock */
2802 amba_pclk_disable(pcdev);
2804 amba_pclk_unprepare(pcdev);
2806 return 0;
2809 static int __maybe_unused pl330_resume(struct device *dev)
2811 struct amba_device *pcdev = to_amba_device(dev);
2812 int ret;
2814 ret = amba_pclk_prepare(pcdev);
2815 if (ret)
2816 return ret;
2818 if (!pm_runtime_status_suspended(dev))
2819 ret = amba_pclk_enable(pcdev);
2821 pm_runtime_enable(dev);
2823 return ret;
2826 static SIMPLE_DEV_PM_OPS(pl330_pm, pl330_suspend, pl330_resume);
2828 static int
2829 pl330_probe(struct amba_device *adev, const struct amba_id *id)
2831 struct dma_pl330_platdata *pdat;
2832 struct pl330_config *pcfg;
2833 struct pl330_dmac *pl330;
2834 struct dma_pl330_chan *pch, *_p;
2835 struct dma_device *pd;
2836 struct resource *res;
2837 int i, ret, irq;
2838 int num_chan;
2839 struct device_node *np = adev->dev.of_node;
2841 pdat = dev_get_platdata(&adev->dev);
2843 ret = dma_set_mask_and_coherent(&adev->dev, DMA_BIT_MASK(32));
2844 if (ret)
2845 return ret;
2847 /* Allocate a new DMAC and its Channels */
2848 pl330 = devm_kzalloc(&adev->dev, sizeof(*pl330), GFP_KERNEL);
2849 if (!pl330)
2850 return -ENOMEM;
2852 pd = &pl330->ddma;
2853 pd->dev = &adev->dev;
2855 pl330->mcbufsz = pdat ? pdat->mcbuf_sz : 0;
2857 /* get quirk */
2858 for (i = 0; i < ARRAY_SIZE(of_quirks); i++)
2859 if (of_property_read_bool(np, of_quirks[i].quirk))
2860 pl330->quirks |= of_quirks[i].id;
2862 res = &adev->res;
2863 pl330->base = devm_ioremap_resource(&adev->dev, res);
2864 if (IS_ERR(pl330->base))
2865 return PTR_ERR(pl330->base);
2867 amba_set_drvdata(adev, pl330);
2869 for (i = 0; i < AMBA_NR_IRQS; i++) {
2870 irq = adev->irq[i];
2871 if (irq) {
2872 ret = devm_request_irq(&adev->dev, irq,
2873 pl330_irq_handler, 0,
2874 dev_name(&adev->dev), pl330);
2875 if (ret)
2876 return ret;
2877 } else {
2878 break;
2882 pcfg = &pl330->pcfg;
2884 pcfg->periph_id = adev->periphid;
2885 ret = pl330_add(pl330);
2886 if (ret)
2887 return ret;
2889 INIT_LIST_HEAD(&pl330->desc_pool);
2890 spin_lock_init(&pl330->pool_lock);
2892 /* Create a descriptor pool of default size */
2893 if (!add_desc(pl330, GFP_KERNEL, NR_DEFAULT_DESC))
2894 dev_warn(&adev->dev, "unable to allocate desc\n");
2896 INIT_LIST_HEAD(&pd->channels);
2898 /* Initialize channel parameters */
2899 if (pdat)
2900 num_chan = max_t(int, pdat->nr_valid_peri, pcfg->num_chan);
2901 else
2902 num_chan = max_t(int, pcfg->num_peri, pcfg->num_chan);
2904 pl330->num_peripherals = num_chan;
2906 pl330->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
2907 if (!pl330->peripherals) {
2908 ret = -ENOMEM;
2909 goto probe_err2;
2912 for (i = 0; i < num_chan; i++) {
2913 pch = &pl330->peripherals[i];
2914 if (!adev->dev.of_node)
2915 pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
2916 else
2917 pch->chan.private = adev->dev.of_node;
2919 INIT_LIST_HEAD(&pch->submitted_list);
2920 INIT_LIST_HEAD(&pch->work_list);
2921 INIT_LIST_HEAD(&pch->completed_list);
2922 spin_lock_init(&pch->lock);
2923 pch->thread = NULL;
2924 pch->chan.device = pd;
2925 pch->dmac = pl330;
2927 /* Add the channel to the DMAC list */
2928 list_add_tail(&pch->chan.device_node, &pd->channels);
2931 if (pdat) {
2932 pd->cap_mask = pdat->cap_mask;
2933 } else {
2934 dma_cap_set(DMA_MEMCPY, pd->cap_mask);
2935 if (pcfg->num_peri) {
2936 dma_cap_set(DMA_SLAVE, pd->cap_mask);
2937 dma_cap_set(DMA_CYCLIC, pd->cap_mask);
2938 dma_cap_set(DMA_PRIVATE, pd->cap_mask);
2942 pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
2943 pd->device_free_chan_resources = pl330_free_chan_resources;
2944 pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy;
2945 pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic;
2946 pd->device_tx_status = pl330_tx_status;
2947 pd->device_prep_slave_sg = pl330_prep_slave_sg;
2948 pd->device_config = pl330_config;
2949 pd->device_pause = pl330_pause;
2950 pd->device_terminate_all = pl330_terminate_all;
2951 pd->device_issue_pending = pl330_issue_pending;
2952 pd->src_addr_widths = PL330_DMA_BUSWIDTHS;
2953 pd->dst_addr_widths = PL330_DMA_BUSWIDTHS;
2954 pd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2955 pd->residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
2956 pd->max_burst = ((pl330->quirks & PL330_QUIRK_BROKEN_NO_FLUSHP) ?
2957 1 : PL330_MAX_BURST);
2959 ret = dma_async_device_register(pd);
2960 if (ret) {
2961 dev_err(&adev->dev, "unable to register DMAC\n");
2962 goto probe_err3;
2965 if (adev->dev.of_node) {
2966 ret = of_dma_controller_register(adev->dev.of_node,
2967 of_dma_pl330_xlate, pl330);
2968 if (ret) {
2969 dev_err(&adev->dev,
2970 "unable to register DMA to the generic DT DMA helpers\n");
2974 adev->dev.dma_parms = &pl330->dma_parms;
2977 * This is the limit for transfers with a buswidth of 1, larger
2978 * buswidths will have larger limits.
2980 ret = dma_set_max_seg_size(&adev->dev, 1900800);
2981 if (ret)
2982 dev_err(&adev->dev, "unable to set the seg size\n");
2985 dev_info(&adev->dev,
2986 "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
2987 dev_info(&adev->dev,
2988 "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
2989 pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
2990 pcfg->num_peri, pcfg->num_events);
2992 pm_runtime_irq_safe(&adev->dev);
2993 pm_runtime_use_autosuspend(&adev->dev);
2994 pm_runtime_set_autosuspend_delay(&adev->dev, PL330_AUTOSUSPEND_DELAY);
2995 pm_runtime_mark_last_busy(&adev->dev);
2996 pm_runtime_put_autosuspend(&adev->dev);
2998 return 0;
2999 probe_err3:
3000 /* Idle the DMAC */
3001 list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3002 chan.device_node) {
3004 /* Remove the channel */
3005 list_del(&pch->chan.device_node);
3007 /* Flush the channel */
3008 if (pch->thread) {
3009 pl330_terminate_all(&pch->chan);
3010 pl330_free_chan_resources(&pch->chan);
3013 probe_err2:
3014 pl330_del(pl330);
3016 return ret;
3019 static int pl330_remove(struct amba_device *adev)
3021 struct pl330_dmac *pl330 = amba_get_drvdata(adev);
3022 struct dma_pl330_chan *pch, *_p;
3023 int i, irq;
3025 pm_runtime_get_noresume(pl330->ddma.dev);
3027 if (adev->dev.of_node)
3028 of_dma_controller_free(adev->dev.of_node);
3030 for (i = 0; i < AMBA_NR_IRQS; i++) {
3031 irq = adev->irq[i];
3032 devm_free_irq(&adev->dev, irq, pl330);
3035 dma_async_device_unregister(&pl330->ddma);
3037 /* Idle the DMAC */
3038 list_for_each_entry_safe(pch, _p, &pl330->ddma.channels,
3039 chan.device_node) {
3041 /* Remove the channel */
3042 list_del(&pch->chan.device_node);
3044 /* Flush the channel */
3045 if (pch->thread) {
3046 pl330_terminate_all(&pch->chan);
3047 pl330_free_chan_resources(&pch->chan);
3051 pl330_del(pl330);
3053 return 0;
3056 static struct amba_id pl330_ids[] = {
3058 .id = 0x00041330,
3059 .mask = 0x000fffff,
3061 { 0, 0 },
3064 MODULE_DEVICE_TABLE(amba, pl330_ids);
3066 static struct amba_driver pl330_driver = {
3067 .drv = {
3068 .owner = THIS_MODULE,
3069 .name = "dma-pl330",
3070 .pm = &pl330_pm,
3072 .id_table = pl330_ids,
3073 .probe = pl330_probe,
3074 .remove = pl330_remove,
3077 module_amba_driver(pl330_driver);
3079 MODULE_AUTHOR("Jaswinder Singh <jassisinghbrar@gmail.com>");
3080 MODULE_DESCRIPTION("API Driver for PL330 DMAC");
3081 MODULE_LICENSE("GPL");