sh_eth: fix EESIPR values for SH77{34|63}

[linux/fpc-iii.git] / kernel / time / sched_clock.c

/*
 * sched_clock.c: Generic sched_clock() support, to extend low level
 *                hardware time counters to full 64-bit ns values.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include <linux/ktime.h>
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/sched.h>
#include <linux/syscore_ops.h>
#include <linux/hrtimer.h>
#include <linux/sched_clock.h>
#include <linux/seqlock.h>
#include <linux/bitops.h>

/**
 * struct clock_read_data - data required to read from sched_clock()
 *
 * @epoch_ns:           sched_clock() value at last update
 * @epoch_cyc:          Clock cycle value at last update.
 * @sched_clock_mask:   Bitmask for two's complement subtraction of non 64bit
 *                      clocks.
 * @read_sched_clock:   Current clock source (or dummy source when suspended).
 * @mult:               Multipler for scaled math conversion.
 * @shift:              Shift value for scaled math conversion.
 *
 * Care must be taken when updating this structure; it is read by
 * some very hot code paths. It occupies <=40 bytes and, when combined
 * with the seqcount used to synchronize access, comfortably fits into
 * a 64 byte cache line.
 */
struct clock_read_data {
        u64 epoch_ns;
        u64 epoch_cyc;
        u64 sched_clock_mask;
        u64 (*read_sched_clock)(void);
        u32 mult;
        u32 shift;
};

/**
 * struct clock_data - all data needed for sched_clock() (including
 *                     registration of a new clock source)
 *
 * @seq:                Sequence counter for protecting updates. The lowest
 *                      bit is the index for @read_data.
 * @read_data:          Data required to read from sched_clock.
 * @wrap_kt:            Duration for which clock can run before wrapping.
 * @rate:               Tick rate of the registered clock.
 * @actual_read_sched_clock: Registered hardware level clock read function.
 *
 * The ordering of this structure has been chosen to optimize cache
 * performance. In particular 'seq' and 'read_data[0]' (combined) should fit
 * into a single 64-byte cache line.
 */
struct clock_data {
        seqcount_t              seq;
        struct clock_read_data  read_data[2];
        ktime_t                 wrap_kt;
        unsigned long           rate;

        u64 (*actual_read_sched_clock)(void);
};

static struct hrtimer sched_clock_timer;
static int irqtime = -1;

core_param(irqtime, irqtime, int, 0400);

static u64 notrace jiffy_sched_clock_read(void)
{
        /*
         * We don't need to use get_jiffies_64 on 32-bit arches here
         * because we register with BITS_PER_LONG
         */
        return (u64)(jiffies - INITIAL_JIFFIES);
}

static struct clock_data cd ____cacheline_aligned = {
        .read_data[0] = { .mult = NSEC_PER_SEC / HZ,
                          .read_sched_clock = jiffy_sched_clock_read, },
        .actual_read_sched_clock = jiffy_sched_clock_read,
};

static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift)
{
        return (cyc * mult) >> shift;
}

unsigned long long notrace sched_clock(void)
{
        u64 cyc, res;
        unsigned long seq;
        struct clock_read_data *rd;

        do {
                seq = raw_read_seqcount(&cd.seq);
                rd = cd.read_data + (seq & 1);

                cyc = (rd->read_sched_clock() - rd->epoch_cyc) &
                      rd->sched_clock_mask;
                res = rd->epoch_ns + cyc_to_ns(cyc, rd->mult, rd->shift);
        } while (read_seqcount_retry(&cd.seq, seq));

        return res;
}

/*
 * Updating the data required to read the clock.
 *
 * sched_clock() will never observe mis-matched data even if called from
 * an NMI. We do this by maintaining an odd/even copy of the data and
 * steering sched_clock() to one or the other using a sequence counter.
 * In order to preserve the data cache profile of sched_clock() as much
 * as possible the system reverts back to the even copy when the update
 * completes; the odd copy is used *only* during an update.
 */
static void update_clock_read_data(struct clock_read_data *rd)
{
        /* update the backup (odd) copy with the new data */
        cd.read_data[1] = *rd;

        /* steer readers towards the odd copy */
        raw_write_seqcount_latch(&cd.seq);

        /* now its safe for us to update the normal (even) copy */
        cd.read_data[0] = *rd;

        /* switch readers back to the even copy */
        raw_write_seqcount_latch(&cd.seq);
}

/*
 * Atomically update the sched_clock() epoch.
 */
static void update_sched_clock(void)
{
        u64 cyc;
        u64 ns;
        struct clock_read_data rd;

        rd = cd.read_data[0];

        cyc = cd.actual_read_sched_clock();
        ns = rd.epoch_ns + cyc_to_ns((cyc - rd.epoch_cyc) & rd.sched_clock_mask, rd.mult, rd.shift);

        rd.epoch_ns = ns;
        rd.epoch_cyc = cyc;

        update_clock_read_data(&rd);
}

static enum hrtimer_restart sched_clock_poll(struct hrtimer *hrt)
{
        update_sched_clock();
        hrtimer_forward_now(hrt, cd.wrap_kt);

        return HRTIMER_RESTART;
}

void __init
sched_clock_register(u64 (*read)(void), int bits, unsigned long rate)
{
        u64 res, wrap, new_mask, new_epoch, cyc, ns;
        u32 new_mult, new_shift;
        unsigned long r;
        char r_unit;
        struct clock_read_data rd;

        if (cd.rate > rate)
                return;

        WARN_ON(!irqs_disabled());

        /* Calculate the mult/shift to convert counter ticks to ns. */
        clocks_calc_mult_shift(&new_mult, &new_shift, rate, NSEC_PER_SEC, 3600);

        new_mask = CLOCKSOURCE_MASK(bits);
        cd.rate = rate;

        /* Calculate how many nanosecs until we risk wrapping */
        wrap = clocks_calc_max_nsecs(new_mult, new_shift, 0, new_mask, NULL);
        cd.wrap_kt = ns_to_ktime(wrap);

        rd = cd.read_data[0];

        /* Update epoch for new counter and update 'epoch_ns' from old counter*/
        new_epoch = read();
        cyc = cd.actual_read_sched_clock();
        ns = rd.epoch_ns + cyc_to_ns((cyc - rd.epoch_cyc) & rd.sched_clock_mask, rd.mult, rd.shift);
        cd.actual_read_sched_clock = read;

        rd.read_sched_clock     = read;
        rd.sched_clock_mask     = new_mask;
        rd.mult                 = new_mult;
        rd.shift                = new_shift;
        rd.epoch_cyc            = new_epoch;
        rd.epoch_ns             = ns;

        update_clock_read_data(&rd);

        r = rate;
        if (r >= 4000000) {
                r /= 1000000;
                r_unit = 'M';
        } else {
                if (r >= 1000) {
                        r /= 1000;
                        r_unit = 'k';
                } else {
                        r_unit = ' ';
                }
        }

        /* Calculate the ns resolution of this counter */
        res = cyc_to_ns(1ULL, new_mult, new_shift);

        pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lluns\n",
                bits, r, r_unit, res, wrap);

        /* Enable IRQ time accounting if we have a fast enough sched_clock() */
        if (irqtime > 0 || (irqtime == -1 && rate >= 1000000))
                enable_sched_clock_irqtime();

        pr_debug("Registered %pF as sched_clock source\n", read);
}

void __init sched_clock_postinit(void)
{
        /*
         * If no sched_clock() function has been provided at that point,
         * make it the final one one.
         */
        if (cd.actual_read_sched_clock == jiffy_sched_clock_read)
                sched_clock_register(jiffy_sched_clock_read, BITS_PER_LONG, HZ);

        update_sched_clock();

        /*
         * Start the timer to keep sched_clock() properly updated and
         * sets the initial epoch.
         */
        hrtimer_init(&sched_clock_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
        sched_clock_timer.function = sched_clock_poll;
        hrtimer_start(&sched_clock_timer, cd.wrap_kt, HRTIMER_MODE_REL);
}

/*
 * Clock read function for use when the clock is suspended.
 *
 * This function makes it appear to sched_clock() as if the clock
 * stopped counting at its last update.
 *
 * This function must only be called from the critical
 * section in sched_clock(). It relies on the read_seqcount_retry()
 * at the end of the critical section to be sure we observe the
 * correct copy of 'epoch_cyc'.
 */
static u64 notrace suspended_sched_clock_read(void)
{
        unsigned long seq = raw_read_seqcount(&cd.seq);

        return cd.read_data[seq & 1].epoch_cyc;
}

static int sched_clock_suspend(void)
{
        struct clock_read_data *rd = &cd.read_data[0];

        update_sched_clock();
        hrtimer_cancel(&sched_clock_timer);
        rd->read_sched_clock = suspended_sched_clock_read;

        return 0;
}

static void sched_clock_resume(void)
{
        struct clock_read_data *rd = &cd.read_data[0];

        rd->epoch_cyc = cd.actual_read_sched_clock();
        hrtimer_start(&sched_clock_timer, cd.wrap_kt, HRTIMER_MODE_REL);
        rd->read_sched_clock = cd.actual_read_sched_clock;
}

static struct syscore_ops sched_clock_ops = {
        .suspend        = sched_clock_suspend,
        .resume         = sched_clock_resume,
};

static int __init sched_clock_syscore_init(void)
{
        register_syscore_ops(&sched_clock_ops);

        return 0;
}
device_initcall(sched_clock_syscore_init);