2 * Linux-DVB Driver for DiBcom's DiB8000 chip (ISDB-T).
4 * Copyright (C) 2009 DiBcom (http://www.dibcom.fr/)
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License as
8 * published by the Free Software Foundation, version 2.
10 #include <linux/kernel.h>
11 #include <linux/slab.h>
12 #include <linux/i2c.h>
13 #include <linux/mutex.h>
14 #include <asm/div64.h>
18 #include "dvb_frontend.h"
27 #define MAX_NUMBER_OF_FRONTENDS 6
28 /* #define DIB8000_AGC_FREEZE */
31 module_param(debug
, int, 0644);
32 MODULE_PARM_DESC(debug
, "turn on debugging (default: 0)");
34 #define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB8000: "); printk(args); printk("\n"); } } while (0)
37 struct i2c_adapter
*adap
;
41 struct mutex
*i2c_buffer_lock
;
44 enum param_loop_step
{
49 enum dib8000_autosearch_step
{
57 SYMBOL_DEPENDENT_OFF
= 0,
61 struct dib8000_state
{
62 struct dib8000_config cfg
;
64 struct i2c_device i2c
;
66 struct dibx000_i2c_master i2c_master
;
71 u32 current_bandwidth
;
72 struct dibx000_agc_config
*current_agc
;
81 u8 differential_constellation
;
84 s16 ber_monitored_layer
;
90 enum frontend_tune_state tune_state
;
93 struct dvb_frontend
*fe
[MAX_NUMBER_OF_FRONTENDS
];
95 /* for the I2C transfer */
96 struct i2c_msg msg
[2];
97 u8 i2c_write_buffer
[4];
98 u8 i2c_read_buffer
[2];
99 struct mutex i2c_buffer_lock
;
103 struct i2c_adapter dib8096p_tuner_adap
;
104 u16 current_demod_bw
;
112 u8 channel_parameters_set
;
113 u16 autosearch_state
;
119 u8 longest_intlv_layer
;
122 /* for DVBv5 stats */
124 unsigned long per_jiffies_stats
;
125 unsigned long ber_jiffies_stats
;
126 unsigned long ber_jiffies_stats_layer
[3];
128 #ifdef DIB8000_AGC_FREEZE
136 enum dib8000_power_mode
{
137 DIB8000_POWER_ALL
= 0,
138 DIB8000_POWER_INTERFACE_ONLY
,
141 static u16
dib8000_i2c_read16(struct i2c_device
*i2c
, u16 reg
)
144 struct i2c_msg msg
[2] = {
145 {.addr
= i2c
->addr
>> 1, .flags
= 0, .len
= 2},
146 {.addr
= i2c
->addr
>> 1, .flags
= I2C_M_RD
, .len
= 2},
149 if (mutex_lock_interruptible(i2c
->i2c_buffer_lock
) < 0) {
150 dprintk("could not acquire lock");
154 msg
[0].buf
= i2c
->i2c_write_buffer
;
155 msg
[0].buf
[0] = reg
>> 8;
156 msg
[0].buf
[1] = reg
& 0xff;
157 msg
[1].buf
= i2c
->i2c_read_buffer
;
159 if (i2c_transfer(i2c
->adap
, msg
, 2) != 2)
160 dprintk("i2c read error on %d", reg
);
162 ret
= (msg
[1].buf
[0] << 8) | msg
[1].buf
[1];
163 mutex_unlock(i2c
->i2c_buffer_lock
);
167 static u16
__dib8000_read_word(struct dib8000_state
*state
, u16 reg
)
171 state
->i2c_write_buffer
[0] = reg
>> 8;
172 state
->i2c_write_buffer
[1] = reg
& 0xff;
174 memset(state
->msg
, 0, 2 * sizeof(struct i2c_msg
));
175 state
->msg
[0].addr
= state
->i2c
.addr
>> 1;
176 state
->msg
[0].flags
= 0;
177 state
->msg
[0].buf
= state
->i2c_write_buffer
;
178 state
->msg
[0].len
= 2;
179 state
->msg
[1].addr
= state
->i2c
.addr
>> 1;
180 state
->msg
[1].flags
= I2C_M_RD
;
181 state
->msg
[1].buf
= state
->i2c_read_buffer
;
182 state
->msg
[1].len
= 2;
184 if (i2c_transfer(state
->i2c
.adap
, state
->msg
, 2) != 2)
185 dprintk("i2c read error on %d", reg
);
187 ret
= (state
->i2c_read_buffer
[0] << 8) | state
->i2c_read_buffer
[1];
192 static u16
dib8000_read_word(struct dib8000_state
*state
, u16 reg
)
196 if (mutex_lock_interruptible(&state
->i2c_buffer_lock
) < 0) {
197 dprintk("could not acquire lock");
201 ret
= __dib8000_read_word(state
, reg
);
203 mutex_unlock(&state
->i2c_buffer_lock
);
208 static u32
dib8000_read32(struct dib8000_state
*state
, u16 reg
)
212 if (mutex_lock_interruptible(&state
->i2c_buffer_lock
) < 0) {
213 dprintk("could not acquire lock");
217 rw
[0] = __dib8000_read_word(state
, reg
+ 0);
218 rw
[1] = __dib8000_read_word(state
, reg
+ 1);
220 mutex_unlock(&state
->i2c_buffer_lock
);
222 return ((rw
[0] << 16) | (rw
[1]));
225 static int dib8000_i2c_write16(struct i2c_device
*i2c
, u16 reg
, u16 val
)
227 struct i2c_msg msg
= {.addr
= i2c
->addr
>> 1, .flags
= 0, .len
= 4};
230 if (mutex_lock_interruptible(i2c
->i2c_buffer_lock
) < 0) {
231 dprintk("could not acquire lock");
235 msg
.buf
= i2c
->i2c_write_buffer
;
236 msg
.buf
[0] = (reg
>> 8) & 0xff;
237 msg
.buf
[1] = reg
& 0xff;
238 msg
.buf
[2] = (val
>> 8) & 0xff;
239 msg
.buf
[3] = val
& 0xff;
241 ret
= i2c_transfer(i2c
->adap
, &msg
, 1) != 1 ? -EREMOTEIO
: 0;
242 mutex_unlock(i2c
->i2c_buffer_lock
);
247 static int dib8000_write_word(struct dib8000_state
*state
, u16 reg
, u16 val
)
251 if (mutex_lock_interruptible(&state
->i2c_buffer_lock
) < 0) {
252 dprintk("could not acquire lock");
256 state
->i2c_write_buffer
[0] = (reg
>> 8) & 0xff;
257 state
->i2c_write_buffer
[1] = reg
& 0xff;
258 state
->i2c_write_buffer
[2] = (val
>> 8) & 0xff;
259 state
->i2c_write_buffer
[3] = val
& 0xff;
261 memset(&state
->msg
[0], 0, sizeof(struct i2c_msg
));
262 state
->msg
[0].addr
= state
->i2c
.addr
>> 1;
263 state
->msg
[0].flags
= 0;
264 state
->msg
[0].buf
= state
->i2c_write_buffer
;
265 state
->msg
[0].len
= 4;
267 ret
= (i2c_transfer(state
->i2c
.adap
, state
->msg
, 1) != 1 ?
269 mutex_unlock(&state
->i2c_buffer_lock
);
274 static const s16 coeff_2k_sb_1seg_dqpsk
[8] = {
275 (769 << 5) | 0x0a, (745 << 5) | 0x03, (595 << 5) | 0x0d, (769 << 5) | 0x0a, (920 << 5) | 0x09, (784 << 5) | 0x02, (519 << 5) | 0x0c,
279 static const s16 coeff_2k_sb_1seg
[8] = {
280 (692 << 5) | 0x0b, (683 << 5) | 0x01, (519 << 5) | 0x09, (692 << 5) | 0x0b, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f, 0 | 0x1f
283 static const s16 coeff_2k_sb_3seg_0dqpsk_1dqpsk
[8] = {
284 (832 << 5) | 0x10, (912 << 5) | 0x05, (900 << 5) | 0x12, (832 << 5) | 0x10, (-931 << 5) | 0x0f, (912 << 5) | 0x04, (807 << 5) | 0x11,
288 static const s16 coeff_2k_sb_3seg_0dqpsk
[8] = {
289 (622 << 5) | 0x0c, (941 << 5) | 0x04, (796 << 5) | 0x10, (622 << 5) | 0x0c, (982 << 5) | 0x0c, (519 << 5) | 0x02, (572 << 5) | 0x0e,
293 static const s16 coeff_2k_sb_3seg_1dqpsk
[8] = {
294 (699 << 5) | 0x14, (607 << 5) | 0x04, (944 << 5) | 0x13, (699 << 5) | 0x14, (-720 << 5) | 0x0d, (640 << 5) | 0x03, (866 << 5) | 0x12,
298 static const s16 coeff_2k_sb_3seg
[8] = {
299 (664 << 5) | 0x0c, (925 << 5) | 0x03, (937 << 5) | 0x10, (664 << 5) | 0x0c, (-610 << 5) | 0x0a, (697 << 5) | 0x01, (836 << 5) | 0x0e,
303 static const s16 coeff_4k_sb_1seg_dqpsk
[8] = {
304 (-955 << 5) | 0x0e, (687 << 5) | 0x04, (818 << 5) | 0x10, (-955 << 5) | 0x0e, (-922 << 5) | 0x0d, (750 << 5) | 0x03, (665 << 5) | 0x0f,
308 static const s16 coeff_4k_sb_1seg
[8] = {
309 (638 << 5) | 0x0d, (683 << 5) | 0x02, (638 << 5) | 0x0d, (638 << 5) | 0x0d, (-655 << 5) | 0x0a, (517 << 5) | 0x00, (698 << 5) | 0x0d,
313 static const s16 coeff_4k_sb_3seg_0dqpsk_1dqpsk
[8] = {
314 (-707 << 5) | 0x14, (910 << 5) | 0x06, (889 << 5) | 0x16, (-707 << 5) | 0x14, (-958 << 5) | 0x13, (993 << 5) | 0x05, (523 << 5) | 0x14,
318 static const s16 coeff_4k_sb_3seg_0dqpsk
[8] = {
319 (-723 << 5) | 0x13, (910 << 5) | 0x05, (777 << 5) | 0x14, (-723 << 5) | 0x13, (-568 << 5) | 0x0f, (547 << 5) | 0x03, (696 << 5) | 0x12,
323 static const s16 coeff_4k_sb_3seg_1dqpsk
[8] = {
324 (-940 << 5) | 0x15, (607 << 5) | 0x05, (915 << 5) | 0x16, (-940 << 5) | 0x15, (-848 << 5) | 0x13, (683 << 5) | 0x04, (543 << 5) | 0x14,
328 static const s16 coeff_4k_sb_3seg
[8] = {
329 (612 << 5) | 0x12, (910 << 5) | 0x04, (864 << 5) | 0x14, (612 << 5) | 0x12, (-869 << 5) | 0x13, (683 << 5) | 0x02, (869 << 5) | 0x12,
333 static const s16 coeff_8k_sb_1seg_dqpsk
[8] = {
334 (-835 << 5) | 0x12, (684 << 5) | 0x05, (735 << 5) | 0x14, (-835 << 5) | 0x12, (-598 << 5) | 0x10, (781 << 5) | 0x04, (739 << 5) | 0x13,
338 static const s16 coeff_8k_sb_1seg
[8] = {
339 (673 << 5) | 0x0f, (683 << 5) | 0x03, (808 << 5) | 0x12, (673 << 5) | 0x0f, (585 << 5) | 0x0f, (512 << 5) | 0x01, (780 << 5) | 0x0f,
343 static const s16 coeff_8k_sb_3seg_0dqpsk_1dqpsk
[8] = {
344 (863 << 5) | 0x17, (930 << 5) | 0x07, (878 << 5) | 0x19, (863 << 5) | 0x17, (0 << 5) | 0x14, (521 << 5) | 0x05, (980 << 5) | 0x18,
348 static const s16 coeff_8k_sb_3seg_0dqpsk
[8] = {
349 (-924 << 5) | 0x17, (910 << 5) | 0x06, (774 << 5) | 0x17, (-924 << 5) | 0x17, (-877 << 5) | 0x15, (565 << 5) | 0x04, (553 << 5) | 0x15,
353 static const s16 coeff_8k_sb_3seg_1dqpsk
[8] = {
354 (-921 << 5) | 0x19, (607 << 5) | 0x06, (881 << 5) | 0x19, (-921 << 5) | 0x19, (-921 << 5) | 0x14, (713 << 5) | 0x05, (1018 << 5) | 0x18,
358 static const s16 coeff_8k_sb_3seg
[8] = {
359 (514 << 5) | 0x14, (910 << 5) | 0x05, (861 << 5) | 0x17, (514 << 5) | 0x14, (690 << 5) | 0x14, (683 << 5) | 0x03, (662 << 5) | 0x15,
363 static const s16 ana_fe_coeff_3seg
[24] = {
364 81, 80, 78, 74, 68, 61, 54, 45, 37, 28, 19, 11, 4, 1022, 1017, 1013, 1010, 1008, 1008, 1008, 1008, 1010, 1014, 1017
367 static const s16 ana_fe_coeff_1seg
[24] = {
368 249, 226, 164, 82, 5, 981, 970, 988, 1018, 20, 31, 26, 8, 1012, 1000, 1018, 1012, 8, 15, 14, 9, 3, 1017, 1003
371 static const s16 ana_fe_coeff_13seg
[24] = {
372 396, 305, 105, -51, -77, -12, 41, 31, -11, -30, -11, 14, 15, -2, -13, -7, 5, 8, 1, -6, -7, -3, 0, 1
375 static u16
fft_to_mode(struct dib8000_state
*state
)
378 switch (state
->fe
[0]->dtv_property_cache
.transmission_mode
) {
379 case TRANSMISSION_MODE_2K
:
382 case TRANSMISSION_MODE_4K
:
386 case TRANSMISSION_MODE_AUTO
:
387 case TRANSMISSION_MODE_8K
:
394 static void dib8000_set_acquisition_mode(struct dib8000_state
*state
)
396 u16 nud
= dib8000_read_word(state
, 298);
397 nud
|= (1 << 3) | (1 << 0);
398 dprintk("acquisition mode activated");
399 dib8000_write_word(state
, 298, nud
);
401 static int dib8000_set_output_mode(struct dvb_frontend
*fe
, int mode
)
403 struct dib8000_state
*state
= fe
->demodulator_priv
;
404 u16 outreg
, fifo_threshold
, smo_mode
, sram
= 0x0205; /* by default SDRAM deintlv is enabled */
406 state
->output_mode
= mode
;
408 fifo_threshold
= 1792;
409 smo_mode
= (dib8000_read_word(state
, 299) & 0x0050) | (1 << 1);
411 dprintk("-I- Setting output mode for demod %p to %d",
412 &state
->fe
[0], mode
);
415 case OUTMODE_MPEG2_PAR_GATED_CLK
: // STBs with parallel gated clock
416 outreg
= (1 << 10); /* 0x0400 */
418 case OUTMODE_MPEG2_PAR_CONT_CLK
: // STBs with parallel continues clock
419 outreg
= (1 << 10) | (1 << 6); /* 0x0440 */
421 case OUTMODE_MPEG2_SERIAL
: // STBs with serial input
422 outreg
= (1 << 10) | (2 << 6) | (0 << 1); /* 0x0482 */
424 case OUTMODE_DIVERSITY
:
425 if (state
->cfg
.hostbus_diversity
) {
426 outreg
= (1 << 10) | (4 << 6); /* 0x0500 */
431 case OUTMODE_MPEG2_FIFO
: // e.g. USB feeding
432 smo_mode
|= (3 << 1);
433 fifo_threshold
= 512;
434 outreg
= (1 << 10) | (5 << 6);
436 case OUTMODE_HIGH_Z
: // disable
440 case OUTMODE_ANALOG_ADC
:
441 outreg
= (1 << 10) | (3 << 6);
442 dib8000_set_acquisition_mode(state
);
446 dprintk("Unhandled output_mode passed to be set for demod %p",
451 if (state
->cfg
.output_mpeg2_in_188_bytes
)
452 smo_mode
|= (1 << 5);
454 dib8000_write_word(state
, 299, smo_mode
);
455 dib8000_write_word(state
, 300, fifo_threshold
); /* synchronous fread */
456 dib8000_write_word(state
, 1286, outreg
);
457 dib8000_write_word(state
, 1291, sram
);
462 static int dib8000_set_diversity_in(struct dvb_frontend
*fe
, int onoff
)
464 struct dib8000_state
*state
= fe
->demodulator_priv
;
465 u16 tmp
, sync_wait
= dib8000_read_word(state
, 273) & 0xfff0;
467 dprintk("set diversity input to %i", onoff
);
468 if (!state
->differential_constellation
) {
469 dib8000_write_word(state
, 272, 1 << 9); //dvsy_off_lmod4 = 1
470 dib8000_write_word(state
, 273, sync_wait
| (1 << 2) | 2); // sync_enable = 1; comb_mode = 2
472 dib8000_write_word(state
, 272, 0); //dvsy_off_lmod4 = 0
473 dib8000_write_word(state
, 273, sync_wait
); // sync_enable = 0; comb_mode = 0
475 state
->diversity_onoff
= onoff
;
478 case 0: /* only use the internal way - not the diversity input */
479 dib8000_write_word(state
, 270, 1);
480 dib8000_write_word(state
, 271, 0);
482 case 1: /* both ways */
483 dib8000_write_word(state
, 270, 6);
484 dib8000_write_word(state
, 271, 6);
486 case 2: /* only the diversity input */
487 dib8000_write_word(state
, 270, 0);
488 dib8000_write_word(state
, 271, 1);
492 if (state
->revision
== 0x8002) {
493 tmp
= dib8000_read_word(state
, 903);
494 dib8000_write_word(state
, 903, tmp
& ~(1 << 3));
496 dib8000_write_word(state
, 903, tmp
| (1 << 3));
501 static void dib8000_set_power_mode(struct dib8000_state
*state
, enum dib8000_power_mode mode
)
503 /* by default everything is going to be powered off */
504 u16 reg_774
= 0x3fff, reg_775
= 0xffff, reg_776
= 0xffff,
505 reg_900
= (dib8000_read_word(state
, 900) & 0xfffc) | 0x3,
508 if (state
->revision
!= 0x8090)
509 reg_1280
= (dib8000_read_word(state
, 1280) & 0x00ff) | 0xff00;
511 reg_1280
= (dib8000_read_word(state
, 1280) & 0x707f) | 0x8f80;
513 /* now, depending on the requested mode, we power on */
515 /* power up everything in the demod */
516 case DIB8000_POWER_ALL
:
521 if (state
->revision
!= 0x8090)
526 case DIB8000_POWER_INTERFACE_ONLY
:
527 if (state
->revision
!= 0x8090)
534 dprintk("powermode : 774 : %x ; 775 : %x; 776 : %x ; 900 : %x; 1280 : %x", reg_774
, reg_775
, reg_776
, reg_900
, reg_1280
);
535 dib8000_write_word(state
, 774, reg_774
);
536 dib8000_write_word(state
, 775, reg_775
);
537 dib8000_write_word(state
, 776, reg_776
);
538 dib8000_write_word(state
, 900, reg_900
);
539 dib8000_write_word(state
, 1280, reg_1280
);
542 static int dib8000_set_adc_state(struct dib8000_state
*state
, enum dibx000_adc_states no
)
545 u16 reg
, reg_907
= dib8000_read_word(state
, 907);
546 u16 reg_908
= dib8000_read_word(state
, 908);
549 case DIBX000_SLOW_ADC_ON
:
550 if (state
->revision
!= 0x8090) {
551 reg_908
|= (1 << 1) | (1 << 0);
552 ret
|= dib8000_write_word(state
, 908, reg_908
);
553 reg_908
&= ~(1 << 1);
555 reg
= dib8000_read_word(state
, 1925);
556 /* en_slowAdc = 1 & reset_sladc = 1 */
557 dib8000_write_word(state
, 1925, reg
|
560 /* read acces to make it works... strange ... */
561 reg
= dib8000_read_word(state
, 1925);
563 /* en_slowAdc = 1 & reset_sladc = 0 */
564 dib8000_write_word(state
, 1925, reg
& ~(1<<4));
566 reg
= dib8000_read_word(state
, 921) & ~((0x3 << 14)
568 /* ref = Vin1 => Vbg ; sel = Vin0 or Vin3 ;
570 dib8000_write_word(state
, 921, reg
| (1 << 14)
575 case DIBX000_SLOW_ADC_OFF
:
576 if (state
->revision
== 0x8090) {
577 reg
= dib8000_read_word(state
, 1925);
578 /* reset_sladc = 1 en_slowAdc = 0 */
579 dib8000_write_word(state
, 1925,
580 (reg
& ~(1<<2)) | (1<<4));
582 reg_908
|= (1 << 1) | (1 << 0);
590 case DIBX000_ADC_OFF
: // leave the VBG voltage on
591 reg_907
|= (1 << 14) | (1 << 13) | (1 << 12);
592 reg_908
|= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 2);
595 case DIBX000_VBG_ENABLE
:
596 reg_907
&= ~(1 << 15);
599 case DIBX000_VBG_DISABLE
:
600 reg_907
|= (1 << 15);
607 ret
|= dib8000_write_word(state
, 907, reg_907
);
608 ret
|= dib8000_write_word(state
, 908, reg_908
);
613 static int dib8000_set_bandwidth(struct dvb_frontend
*fe
, u32 bw
)
615 struct dib8000_state
*state
= fe
->demodulator_priv
;
621 if (state
->timf
== 0) {
622 dprintk("using default timf");
623 timf
= state
->timf_default
;
625 dprintk("using updated timf");
629 dib8000_write_word(state
, 29, (u16
) ((timf
>> 16) & 0xffff));
630 dib8000_write_word(state
, 30, (u16
) ((timf
) & 0xffff));
635 static int dib8000_sad_calib(struct dib8000_state
*state
)
639 if (state
->revision
== 0x8090) {
640 dib8000_write_word(state
, 922, (sad_sel
<< 2));
641 dib8000_write_word(state
, 923, 2048);
643 dib8000_write_word(state
, 922, (sad_sel
<< 2) | 0x1);
644 dib8000_write_word(state
, 922, (sad_sel
<< 2));
647 dib8000_write_word(state
, 923, (0 << 1) | (0 << 0));
648 dib8000_write_word(state
, 924, 776);
650 /* do the calibration */
651 dib8000_write_word(state
, 923, (1 << 0));
652 dib8000_write_word(state
, 923, (0 << 0));
659 int dib8000_set_wbd_ref(struct dvb_frontend
*fe
, u16 value
)
661 struct dib8000_state
*state
= fe
->demodulator_priv
;
664 state
->wbd_ref
= value
;
665 return dib8000_write_word(state
, 106, value
);
667 EXPORT_SYMBOL(dib8000_set_wbd_ref
);
669 static void dib8000_reset_pll_common(struct dib8000_state
*state
, const struct dibx000_bandwidth_config
*bw
)
671 dprintk("ifreq: %d %x, inversion: %d", bw
->ifreq
, bw
->ifreq
, bw
->ifreq
>> 25);
672 if (state
->revision
!= 0x8090) {
673 dib8000_write_word(state
, 23,
674 (u16
) (((bw
->internal
* 1000) >> 16) & 0xffff));
675 dib8000_write_word(state
, 24,
676 (u16
) ((bw
->internal
* 1000) & 0xffff));
678 dib8000_write_word(state
, 23, (u16
) (((bw
->internal
/ 2 * 1000) >> 16) & 0xffff));
679 dib8000_write_word(state
, 24,
680 (u16
) ((bw
->internal
/ 2 * 1000) & 0xffff));
682 dib8000_write_word(state
, 27, (u16
) ((bw
->ifreq
>> 16) & 0x01ff));
683 dib8000_write_word(state
, 28, (u16
) (bw
->ifreq
& 0xffff));
684 dib8000_write_word(state
, 26, (u16
) ((bw
->ifreq
>> 25) & 0x0003));
686 if (state
->revision
!= 0x8090)
687 dib8000_write_word(state
, 922, bw
->sad_cfg
);
690 static void dib8000_reset_pll(struct dib8000_state
*state
)
692 const struct dibx000_bandwidth_config
*pll
= state
->cfg
.pll
;
695 if (state
->revision
!= 0x8090) {
696 dib8000_write_word(state
, 901,
697 (pll
->pll_prediv
<< 8) | (pll
->pll_ratio
<< 0));
699 clk_cfg1
= (1 << 10) | (0 << 9) | (pll
->IO_CLK_en_core
<< 8) |
700 (pll
->bypclk_div
<< 5) | (pll
->enable_refdiv
<< 4) |
701 (1 << 3) | (pll
->pll_range
<< 1) |
702 (pll
->pll_reset
<< 0);
704 dib8000_write_word(state
, 902, clk_cfg1
);
705 clk_cfg1
= (clk_cfg1
& 0xfff7) | (pll
->pll_bypass
<< 3);
706 dib8000_write_word(state
, 902, clk_cfg1
);
708 dprintk("clk_cfg1: 0x%04x", clk_cfg1
);
710 /* smpl_cfg: P_refclksel=2, P_ensmplsel=1 nodivsmpl=1 */
711 if (state
->cfg
.pll
->ADClkSrc
== 0)
712 dib8000_write_word(state
, 904,
713 (0 << 15) | (0 << 12) | (0 << 10) |
715 (pll
->ADClkSrc
<< 7) | (0 << 1));
716 else if (state
->cfg
.refclksel
!= 0)
717 dib8000_write_word(state
, 904, (0 << 15) | (1 << 12) |
718 ((state
->cfg
.refclksel
& 0x3) << 10) |
720 (pll
->ADClkSrc
<< 7) | (0 << 1));
722 dib8000_write_word(state
, 904, (0 << 15) | (1 << 12) |
723 (3 << 10) | (pll
->modulo
<< 8) |
724 (pll
->ADClkSrc
<< 7) | (0 << 1));
726 dib8000_write_word(state
, 1856, (!pll
->pll_reset
<<13) |
727 (pll
->pll_range
<<12) | (pll
->pll_ratio
<<6) |
730 reg
= dib8000_read_word(state
, 1857);
731 dib8000_write_word(state
, 1857, reg
|(!pll
->pll_bypass
<<15));
733 reg
= dib8000_read_word(state
, 1858); /* Force clk out pll /2 */
734 dib8000_write_word(state
, 1858, reg
| 1);
736 dib8000_write_word(state
, 904, (pll
->modulo
<< 8));
739 dib8000_reset_pll_common(state
, pll
);
742 int dib8000_update_pll(struct dvb_frontend
*fe
,
743 struct dibx000_bandwidth_config
*pll
, u32 bw
, u8 ratio
)
745 struct dib8000_state
*state
= fe
->demodulator_priv
;
746 u16 reg_1857
, reg_1856
= dib8000_read_word(state
, 1856);
747 u8 loopdiv
, prediv
, oldprediv
= state
->cfg
.pll
->pll_prediv
;
750 /* get back old values */
751 prediv
= reg_1856
& 0x3f;
752 loopdiv
= (reg_1856
>> 6) & 0x3f;
754 if ((pll
== NULL
) || (pll
->pll_prediv
== prediv
&&
755 pll
->pll_ratio
== loopdiv
))
758 dprintk("Updating pll (prediv: old = %d new = %d ; loopdiv : old = %d new = %d)", prediv
, pll
->pll_prediv
, loopdiv
, pll
->pll_ratio
);
759 if (state
->revision
== 0x8090) {
761 reg_1857
= dib8000_read_word(state
, 1857);
763 dib8000_write_word(state
, 1857, reg_1857
& ~(1 << 15));
765 dib8000_write_word(state
, 1856, reg_1856
|
766 ((pll
->pll_ratio
& 0x3f) << 6) |
767 (pll
->pll_prediv
& 0x3f));
769 /* write new system clk into P_sec_len */
770 internal
= dib8000_read32(state
, 23) / 1000;
771 dprintk("Old Internal = %d", internal
);
772 xtal
= 2 * (internal
/ loopdiv
) * prediv
;
773 internal
= 1000 * (xtal
/pll
->pll_prediv
) * pll
->pll_ratio
;
774 dprintk("Xtal = %d , New Fmem = %d New Fdemod = %d, New Fsampling = %d", xtal
, internal
/1000, internal
/2000, internal
/8000);
775 dprintk("New Internal = %d", internal
);
777 dib8000_write_word(state
, 23,
778 (u16
) (((internal
/ 2) >> 16) & 0xffff));
779 dib8000_write_word(state
, 24, (u16
) ((internal
/ 2) & 0xffff));
781 dib8000_write_word(state
, 1857, reg_1857
| (1 << 15));
783 while (((dib8000_read_word(state
, 1856)>>15)&0x1) != 1)
784 dprintk("Waiting for PLL to lock");
787 reg_1856
= dib8000_read_word(state
, 1856);
788 dprintk("PLL Updated with prediv = %d and loopdiv = %d",
789 reg_1856
&0x3f, (reg_1856
>>6)&0x3f);
791 if (bw
!= state
->current_demod_bw
) {
792 /** Bandwidth change => force PLL update **/
793 dprintk("PLL: Bandwidth Change %d MHz -> %d MHz (prediv: %d->%d)", state
->current_demod_bw
/ 1000, bw
/ 1000, oldprediv
, state
->cfg
.pll
->pll_prediv
);
795 if (state
->cfg
.pll
->pll_prediv
!= oldprediv
) {
796 /** Full PLL change only if prediv is changed **/
798 /** full update => bypass and reconfigure **/
799 dprintk("PLL: New Setting for %d MHz Bandwidth (prediv: %d, ratio: %d)", bw
/1000, state
->cfg
.pll
->pll_prediv
, state
->cfg
.pll
->pll_ratio
);
800 dib8000_write_word(state
, 902, dib8000_read_word(state
, 902) | (1<<3)); /* bypass PLL */
801 dib8000_reset_pll(state
);
802 dib8000_write_word(state
, 898, 0x0004); /* sad */
804 ratio
= state
->cfg
.pll
->pll_ratio
;
806 state
->current_demod_bw
= bw
;
810 /** ratio update => only change ratio **/
811 dprintk("PLL: Update ratio (prediv: %d, ratio: %d)", state
->cfg
.pll
->pll_prediv
, ratio
);
812 dib8000_write_word(state
, 901, (state
->cfg
.pll
->pll_prediv
<< 8) | (ratio
<< 0)); /* only the PLL ratio is updated. */
818 EXPORT_SYMBOL(dib8000_update_pll
);
821 static int dib8000_reset_gpio(struct dib8000_state
*st
)
823 /* reset the GPIOs */
824 dib8000_write_word(st
, 1029, st
->cfg
.gpio_dir
);
825 dib8000_write_word(st
, 1030, st
->cfg
.gpio_val
);
827 /* TODO 782 is P_gpio_od */
829 dib8000_write_word(st
, 1032, st
->cfg
.gpio_pwm_pos
);
831 dib8000_write_word(st
, 1037, st
->cfg
.pwm_freq_div
);
835 static int dib8000_cfg_gpio(struct dib8000_state
*st
, u8 num
, u8 dir
, u8 val
)
837 st
->cfg
.gpio_dir
= dib8000_read_word(st
, 1029);
838 st
->cfg
.gpio_dir
&= ~(1 << num
); /* reset the direction bit */
839 st
->cfg
.gpio_dir
|= (dir
& 0x1) << num
; /* set the new direction */
840 dib8000_write_word(st
, 1029, st
->cfg
.gpio_dir
);
842 st
->cfg
.gpio_val
= dib8000_read_word(st
, 1030);
843 st
->cfg
.gpio_val
&= ~(1 << num
); /* reset the direction bit */
844 st
->cfg
.gpio_val
|= (val
& 0x01) << num
; /* set the new value */
845 dib8000_write_word(st
, 1030, st
->cfg
.gpio_val
);
847 dprintk("gpio dir: %x: gpio val: %x", st
->cfg
.gpio_dir
, st
->cfg
.gpio_val
);
852 int dib8000_set_gpio(struct dvb_frontend
*fe
, u8 num
, u8 dir
, u8 val
)
854 struct dib8000_state
*state
= fe
->demodulator_priv
;
855 return dib8000_cfg_gpio(state
, num
, dir
, val
);
858 EXPORT_SYMBOL(dib8000_set_gpio
);
859 static const u16 dib8000_defaults
[] = {
860 /* auto search configuration - lock0 by default waiting
861 * for cpil_lock; lock1 cpil_lock; lock2 tmcc_sync_lock */
882 0x6680 // P_corm_thres Lock algorithms configuration */
884 11, 80, /* set ADC level to -16 */
885 (1 << 13) - 825 - 117,
886 (1 << 13) - 837 - 117,
887 (1 << 13) - 811 - 117,
888 (1 << 13) - 766 - 117,
889 (1 << 13) - 737 - 117,
890 (1 << 13) - 693 - 117,
891 (1 << 13) - 648 - 117,
892 (1 << 13) - 619 - 117,
893 (1 << 13) - 575 - 117,
894 (1 << 13) - 531 - 117,
895 (1 << 13) - 501 - 117,
906 8192, // P_fft_nb_to_cut
909 0x2800, // P_coff_corthres_ ( 2k 4k 8k ) 0x2800
912 0x2800, // P_coff_cpilthres_ ( 2k 4k 8k ) 0x2800
917 0x0666, // P_pha3_thres
918 0x0000, // P_cti_use_cpe, P_cti_use_prog
921 0x200f, // P_cspu_regul, P_cspu_win_cut
922 0x000f, // P_des_shift_work
925 0x023d, // P_adp_regul_cnt
926 0x00a4, // P_adp_noise_cnt
927 0x00a4, // P_adp_regul_ext
928 0x7ff0, // P_adp_noise_ext
932 0x0000, // P_2d_byp_ti_num
935 0x800, //P_equal_thres_wgn
938 (2 << 9) | 39, // P_equal_ctrl_synchro, P_equal_speedmode
941 0x0001, // P_div_lock0_wait
945 0x0062, /* P_smo_mode, P_smo_rs_discard, P_smo_fifo_flush, P_smo_pid_parse, P_smo_error_discard */
948 (1 << 12) | // P_ctrl_corm_thres4pre_freq_inh=1
950 (0 << 9) | /* P_ctrl_pre_freq_inh=0 */
951 (3 << 5) | /* P_ctrl_pre_freq_step=3 */
952 (1 << 0), /* P_pre_freq_win_len=1 */
957 static u16
dib8000_identify(struct i2c_device
*client
)
961 //because of glitches sometimes
962 value
= dib8000_i2c_read16(client
, 896);
964 if ((value
= dib8000_i2c_read16(client
, 896)) != 0x01b3) {
965 dprintk("wrong Vendor ID (read=0x%x)", value
);
969 value
= dib8000_i2c_read16(client
, 897);
970 if (value
!= 0x8000 && value
!= 0x8001 &&
971 value
!= 0x8002 && value
!= 0x8090) {
972 dprintk("wrong Device ID (%x)", value
);
978 dprintk("found DiB8000A");
981 dprintk("found DiB8000B");
984 dprintk("found DiB8000C");
987 dprintk("found DiB8096P");
993 static int dib8000_read_unc_blocks(struct dvb_frontend
*fe
, u32
*unc
);
995 static void dib8000_reset_stats(struct dvb_frontend
*fe
)
997 struct dib8000_state
*state
= fe
->demodulator_priv
;
998 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
1001 memset(&c
->strength
, 0, sizeof(c
->strength
));
1002 memset(&c
->cnr
, 0, sizeof(c
->cnr
));
1003 memset(&c
->post_bit_error
, 0, sizeof(c
->post_bit_error
));
1004 memset(&c
->post_bit_count
, 0, sizeof(c
->post_bit_count
));
1005 memset(&c
->block_error
, 0, sizeof(c
->block_error
));
1007 c
->strength
.len
= 1;
1009 c
->block_error
.len
= 1;
1010 c
->block_count
.len
= 1;
1011 c
->post_bit_error
.len
= 1;
1012 c
->post_bit_count
.len
= 1;
1014 c
->strength
.stat
[0].scale
= FE_SCALE_DECIBEL
;
1015 c
->strength
.stat
[0].uvalue
= 0;
1017 c
->cnr
.stat
[0].scale
= FE_SCALE_NOT_AVAILABLE
;
1018 c
->block_error
.stat
[0].scale
= FE_SCALE_NOT_AVAILABLE
;
1019 c
->block_count
.stat
[0].scale
= FE_SCALE_NOT_AVAILABLE
;
1020 c
->post_bit_error
.stat
[0].scale
= FE_SCALE_NOT_AVAILABLE
;
1021 c
->post_bit_count
.stat
[0].scale
= FE_SCALE_NOT_AVAILABLE
;
1023 dib8000_read_unc_blocks(fe
, &ucb
);
1025 state
->init_ucb
= -ucb
;
1026 state
->ber_jiffies_stats
= 0;
1027 state
->per_jiffies_stats
= 0;
1028 memset(&state
->ber_jiffies_stats_layer
, 0,
1029 sizeof(state
->ber_jiffies_stats_layer
));
1032 static int dib8000_reset(struct dvb_frontend
*fe
)
1034 struct dib8000_state
*state
= fe
->demodulator_priv
;
1036 if ((state
->revision
= dib8000_identify(&state
->i2c
)) == 0)
1039 /* sram lead in, rdy */
1040 if (state
->revision
!= 0x8090)
1041 dib8000_write_word(state
, 1287, 0x0003);
1043 if (state
->revision
== 0x8000)
1044 dprintk("error : dib8000 MA not supported");
1046 dibx000_reset_i2c_master(&state
->i2c_master
);
1048 dib8000_set_power_mode(state
, DIB8000_POWER_ALL
);
1050 /* always leave the VBG voltage on - it consumes almost nothing but takes a long time to start */
1051 dib8000_set_adc_state(state
, DIBX000_ADC_OFF
);
1053 /* restart all parts */
1054 dib8000_write_word(state
, 770, 0xffff);
1055 dib8000_write_word(state
, 771, 0xffff);
1056 dib8000_write_word(state
, 772, 0xfffc);
1057 if (state
->revision
== 0x8090)
1058 dib8000_write_word(state
, 1280, 0x0045);
1060 dib8000_write_word(state
, 1280, 0x004d);
1061 dib8000_write_word(state
, 1281, 0x000c);
1063 dib8000_write_word(state
, 770, 0x0000);
1064 dib8000_write_word(state
, 771, 0x0000);
1065 dib8000_write_word(state
, 772, 0x0000);
1066 dib8000_write_word(state
, 898, 0x0004); // sad
1067 dib8000_write_word(state
, 1280, 0x0000);
1068 dib8000_write_word(state
, 1281, 0x0000);
1071 if (state
->revision
!= 0x8090) {
1072 if (state
->cfg
.drives
)
1073 dib8000_write_word(state
, 906, state
->cfg
.drives
);
1075 dprintk("using standard PAD-drive-settings, please adjust settings in config-struct to be optimal.");
1076 /* min drive SDRAM - not optimal - adjust */
1077 dib8000_write_word(state
, 906, 0x2d98);
1081 dib8000_reset_pll(state
);
1082 if (state
->revision
!= 0x8090)
1083 dib8000_write_word(state
, 898, 0x0004);
1085 if (dib8000_reset_gpio(state
) != 0)
1086 dprintk("GPIO reset was not successful.");
1088 if ((state
->revision
!= 0x8090) &&
1089 (dib8000_set_output_mode(fe
, OUTMODE_HIGH_Z
) != 0))
1090 dprintk("OUTPUT_MODE could not be resetted.");
1092 state
->current_agc
= NULL
;
1094 // P_iqc_alpha_pha, P_iqc_alpha_amp, P_iqc_dcc_alpha, ...
1095 /* P_iqc_ca2 = 0; P_iqc_impnc_on = 0; P_iqc_mode = 0; */
1096 if (state
->cfg
.pll
->ifreq
== 0)
1097 dib8000_write_word(state
, 40, 0x0755); /* P_iqc_corr_inh = 0 enable IQcorr block */
1099 dib8000_write_word(state
, 40, 0x1f55); /* P_iqc_corr_inh = 1 disable IQcorr block */
1104 n
= dib8000_defaults
;
1109 dib8000_write_word(state
, r
, *n
++);
1116 state
->isdbt_cfg_loaded
= 0;
1118 //div_cfg override for special configs
1119 if ((state
->revision
!= 8090) && (state
->cfg
.div_cfg
!= 0))
1120 dib8000_write_word(state
, 903, state
->cfg
.div_cfg
);
1122 /* unforce divstr regardless whether i2c enumeration was done or not */
1123 dib8000_write_word(state
, 1285, dib8000_read_word(state
, 1285) & ~(1 << 1));
1125 dib8000_set_bandwidth(fe
, 6000);
1127 dib8000_set_adc_state(state
, DIBX000_SLOW_ADC_ON
);
1128 dib8000_sad_calib(state
);
1129 if (state
->revision
!= 0x8090)
1130 dib8000_set_adc_state(state
, DIBX000_SLOW_ADC_OFF
);
1132 /* ber_rs_len = 3 */
1133 dib8000_write_word(state
, 285, (dib8000_read_word(state
, 285) & ~0x60) | (3 << 5));
1135 dib8000_set_power_mode(state
, DIB8000_POWER_INTERFACE_ONLY
);
1137 dib8000_reset_stats(fe
);
1142 static void dib8000_restart_agc(struct dib8000_state
*state
)
1144 // P_restart_iqc & P_restart_agc
1145 dib8000_write_word(state
, 770, 0x0a00);
1146 dib8000_write_word(state
, 770, 0x0000);
1149 static int dib8000_update_lna(struct dib8000_state
*state
)
1153 if (state
->cfg
.update_lna
) {
1154 // read dyn_gain here (because it is demod-dependent and not tuner)
1155 dyn_gain
= dib8000_read_word(state
, 390);
1157 if (state
->cfg
.update_lna(state
->fe
[0], dyn_gain
)) {
1158 dib8000_restart_agc(state
);
1165 static int dib8000_set_agc_config(struct dib8000_state
*state
, u8 band
)
1167 struct dibx000_agc_config
*agc
= NULL
;
1171 if (state
->current_band
== band
&& state
->current_agc
!= NULL
)
1173 state
->current_band
= band
;
1175 for (i
= 0; i
< state
->cfg
.agc_config_count
; i
++)
1176 if (state
->cfg
.agc
[i
].band_caps
& band
) {
1177 agc
= &state
->cfg
.agc
[i
];
1182 dprintk("no valid AGC configuration found for band 0x%02x", band
);
1186 state
->current_agc
= agc
;
1189 dib8000_write_word(state
, 76, agc
->setup
);
1190 dib8000_write_word(state
, 77, agc
->inv_gain
);
1191 dib8000_write_word(state
, 78, agc
->time_stabiliz
);
1192 dib8000_write_word(state
, 101, (agc
->alpha_level
<< 12) | agc
->thlock
);
1194 // Demod AGC loop configuration
1195 dib8000_write_word(state
, 102, (agc
->alpha_mant
<< 5) | agc
->alpha_exp
);
1196 dib8000_write_word(state
, 103, (agc
->beta_mant
<< 6) | agc
->beta_exp
);
1198 dprintk("WBD: ref: %d, sel: %d, active: %d, alpha: %d",
1199 state
->wbd_ref
!= 0 ? state
->wbd_ref
: agc
->wbd_ref
, agc
->wbd_sel
, !agc
->perform_agc_softsplit
, agc
->wbd_sel
);
1202 if (state
->wbd_ref
!= 0)
1203 dib8000_write_word(state
, 106, state
->wbd_ref
);
1205 dib8000_write_word(state
, 106, agc
->wbd_ref
);
1207 if (state
->revision
== 0x8090) {
1208 reg
= dib8000_read_word(state
, 922) & (0x3 << 2);
1209 dib8000_write_word(state
, 922, reg
| (agc
->wbd_sel
<< 2));
1212 dib8000_write_word(state
, 107, (agc
->wbd_alpha
<< 9) | (agc
->perform_agc_softsplit
<< 8));
1213 dib8000_write_word(state
, 108, agc
->agc1_max
);
1214 dib8000_write_word(state
, 109, agc
->agc1_min
);
1215 dib8000_write_word(state
, 110, agc
->agc2_max
);
1216 dib8000_write_word(state
, 111, agc
->agc2_min
);
1217 dib8000_write_word(state
, 112, (agc
->agc1_pt1
<< 8) | agc
->agc1_pt2
);
1218 dib8000_write_word(state
, 113, (agc
->agc1_slope1
<< 8) | agc
->agc1_slope2
);
1219 dib8000_write_word(state
, 114, (agc
->agc2_pt1
<< 8) | agc
->agc2_pt2
);
1220 dib8000_write_word(state
, 115, (agc
->agc2_slope1
<< 8) | agc
->agc2_slope2
);
1222 dib8000_write_word(state
, 75, agc
->agc1_pt3
);
1223 if (state
->revision
!= 0x8090)
1224 dib8000_write_word(state
, 923,
1225 (dib8000_read_word(state
, 923) & 0xffe3) |
1226 (agc
->wbd_inv
<< 4) | (agc
->wbd_sel
<< 2));
1231 void dib8000_pwm_agc_reset(struct dvb_frontend
*fe
)
1233 struct dib8000_state
*state
= fe
->demodulator_priv
;
1234 dib8000_set_adc_state(state
, DIBX000_ADC_ON
);
1235 dib8000_set_agc_config(state
, (unsigned char)(BAND_OF_FREQUENCY(fe
->dtv_property_cache
.frequency
/ 1000)));
1237 EXPORT_SYMBOL(dib8000_pwm_agc_reset
);
1239 static int dib8000_agc_soft_split(struct dib8000_state
*state
)
1241 u16 agc
, split_offset
;
1243 if (!state
->current_agc
|| !state
->current_agc
->perform_agc_softsplit
|| state
->current_agc
->split
.max
== 0)
1244 return FE_CALLBACK_TIME_NEVER
;
1247 agc
= dib8000_read_word(state
, 390);
1249 if (agc
> state
->current_agc
->split
.min_thres
)
1250 split_offset
= state
->current_agc
->split
.min
;
1251 else if (agc
< state
->current_agc
->split
.max_thres
)
1252 split_offset
= state
->current_agc
->split
.max
;
1254 split_offset
= state
->current_agc
->split
.max
*
1255 (agc
- state
->current_agc
->split
.min_thres
) /
1256 (state
->current_agc
->split
.max_thres
- state
->current_agc
->split
.min_thres
);
1258 dprintk("AGC split_offset: %d", split_offset
);
1260 // P_agc_force_split and P_agc_split_offset
1261 dib8000_write_word(state
, 107, (dib8000_read_word(state
, 107) & 0xff00) | split_offset
);
1265 static int dib8000_agc_startup(struct dvb_frontend
*fe
)
1267 struct dib8000_state
*state
= fe
->demodulator_priv
;
1268 enum frontend_tune_state
*tune_state
= &state
->tune_state
;
1270 u16 reg
, upd_demod_gain_period
= 0x8000;
1272 switch (*tune_state
) {
1274 // set power-up level: interf+analog+AGC
1276 if (state
->revision
!= 0x8090)
1277 dib8000_set_adc_state(state
, DIBX000_ADC_ON
);
1279 dib8000_set_power_mode(state
, DIB8000_POWER_ALL
);
1281 reg
= dib8000_read_word(state
, 1947)&0xff00;
1282 dib8000_write_word(state
, 1946,
1283 upd_demod_gain_period
& 0xFFFF);
1284 /* bit 14 = enDemodGain */
1285 dib8000_write_word(state
, 1947, reg
| (1<<14) |
1286 ((upd_demod_gain_period
>> 16) & 0xFF));
1288 /* enable adc i & q */
1289 reg
= dib8000_read_word(state
, 1920);
1290 dib8000_write_word(state
, 1920, (reg
| 0x3) &
1294 if (dib8000_set_agc_config(state
, (unsigned char)(BAND_OF_FREQUENCY(fe
->dtv_property_cache
.frequency
/ 1000))) != 0) {
1295 *tune_state
= CT_AGC_STOP
;
1296 state
->status
= FE_STATUS_TUNE_FAILED
;
1301 *tune_state
= CT_AGC_STEP_0
;
1305 //AGC initialization
1306 if (state
->cfg
.agc_control
)
1307 state
->cfg
.agc_control(fe
, 1);
1309 dib8000_restart_agc(state
);
1311 // wait AGC rough lock time
1313 *tune_state
= CT_AGC_STEP_1
;
1317 // wait AGC accurate lock time
1320 if (dib8000_update_lna(state
))
1321 // wait only AGC rough lock time
1324 *tune_state
= CT_AGC_STEP_2
;
1328 dib8000_agc_soft_split(state
);
1330 if (state
->cfg
.agc_control
)
1331 state
->cfg
.agc_control(fe
, 0);
1333 *tune_state
= CT_AGC_STOP
;
1336 ret
= dib8000_agc_soft_split(state
);
1343 static void dib8096p_host_bus_drive(struct dib8000_state
*state
, u8 drive
)
1349 /* drive host bus 2, 3, 4 */
1350 reg
= dib8000_read_word(state
, 1798) &
1351 ~(0x7 | (0x7 << 6) | (0x7 << 12));
1352 reg
|= (drive
<<12) | (drive
<<6) | drive
;
1353 dib8000_write_word(state
, 1798, reg
);
1355 /* drive host bus 5,6 */
1356 reg
= dib8000_read_word(state
, 1799) & ~((0x7 << 2) | (0x7 << 8));
1357 reg
|= (drive
<<8) | (drive
<<2);
1358 dib8000_write_word(state
, 1799, reg
);
1360 /* drive host bus 7, 8, 9 */
1361 reg
= dib8000_read_word(state
, 1800) &
1362 ~(0x7 | (0x7 << 6) | (0x7 << 12));
1363 reg
|= (drive
<<12) | (drive
<<6) | drive
;
1364 dib8000_write_word(state
, 1800, reg
);
1366 /* drive host bus 10, 11 */
1367 reg
= dib8000_read_word(state
, 1801) & ~((0x7 << 2) | (0x7 << 8));
1368 reg
|= (drive
<<8) | (drive
<<2);
1369 dib8000_write_word(state
, 1801, reg
);
1371 /* drive host bus 12, 13, 14 */
1372 reg
= dib8000_read_word(state
, 1802) &
1373 ~(0x7 | (0x7 << 6) | (0x7 << 12));
1374 reg
|= (drive
<<12) | (drive
<<6) | drive
;
1375 dib8000_write_word(state
, 1802, reg
);
1378 static u32
dib8096p_calcSyncFreq(u32 P_Kin
, u32 P_Kout
,
1379 u32 insertExtSynchro
, u32 syncSize
)
1382 u32 nom
= (insertExtSynchro
* P_Kin
+syncSize
);
1384 u32 syncFreq
= ((nom
<< quantif
) / denom
);
1386 if ((syncFreq
& ((1 << quantif
) - 1)) != 0)
1387 syncFreq
= (syncFreq
>> quantif
) + 1;
1389 syncFreq
= (syncFreq
>> quantif
);
1392 syncFreq
= syncFreq
- 1;
1397 static void dib8096p_cfg_DibTx(struct dib8000_state
*state
, u32 P_Kin
,
1398 u32 P_Kout
, u32 insertExtSynchro
, u32 synchroMode
,
1399 u32 syncWord
, u32 syncSize
)
1401 dprintk("Configure DibStream Tx");
1403 dib8000_write_word(state
, 1615, 1);
1404 dib8000_write_word(state
, 1603, P_Kin
);
1405 dib8000_write_word(state
, 1605, P_Kout
);
1406 dib8000_write_word(state
, 1606, insertExtSynchro
);
1407 dib8000_write_word(state
, 1608, synchroMode
);
1408 dib8000_write_word(state
, 1609, (syncWord
>> 16) & 0xffff);
1409 dib8000_write_word(state
, 1610, syncWord
& 0xffff);
1410 dib8000_write_word(state
, 1612, syncSize
);
1411 dib8000_write_word(state
, 1615, 0);
1414 static void dib8096p_cfg_DibRx(struct dib8000_state
*state
, u32 P_Kin
,
1415 u32 P_Kout
, u32 synchroMode
, u32 insertExtSynchro
,
1416 u32 syncWord
, u32 syncSize
, u32 dataOutRate
)
1420 dprintk("Configure DibStream Rx synchroMode = %d", synchroMode
);
1422 if ((P_Kin
!= 0) && (P_Kout
!= 0)) {
1423 syncFreq
= dib8096p_calcSyncFreq(P_Kin
, P_Kout
,
1424 insertExtSynchro
, syncSize
);
1425 dib8000_write_word(state
, 1542, syncFreq
);
1428 dib8000_write_word(state
, 1554, 1);
1429 dib8000_write_word(state
, 1536, P_Kin
);
1430 dib8000_write_word(state
, 1537, P_Kout
);
1431 dib8000_write_word(state
, 1539, synchroMode
);
1432 dib8000_write_word(state
, 1540, (syncWord
>> 16) & 0xffff);
1433 dib8000_write_word(state
, 1541, syncWord
& 0xffff);
1434 dib8000_write_word(state
, 1543, syncSize
);
1435 dib8000_write_word(state
, 1544, dataOutRate
);
1436 dib8000_write_word(state
, 1554, 0);
1439 static void dib8096p_enMpegMux(struct dib8000_state
*state
, int onoff
)
1443 reg_1287
= dib8000_read_word(state
, 1287);
1447 reg_1287
&= ~(1 << 8);
1450 reg_1287
|= (1 << 8);
1454 dib8000_write_word(state
, 1287, reg_1287
);
1457 static void dib8096p_configMpegMux(struct dib8000_state
*state
,
1458 u16 pulseWidth
, u16 enSerialMode
, u16 enSerialClkDiv2
)
1462 dprintk("Enable Mpeg mux");
1464 dib8096p_enMpegMux(state
, 0);
1466 /* If the input mode is MPEG do not divide the serial clock */
1467 if ((enSerialMode
== 1) && (state
->input_mode_mpeg
== 1))
1468 enSerialClkDiv2
= 0;
1470 reg_1287
= ((pulseWidth
& 0x1f) << 3) |
1471 ((enSerialMode
& 0x1) << 2) | (enSerialClkDiv2
& 0x1);
1472 dib8000_write_word(state
, 1287, reg_1287
);
1474 dib8096p_enMpegMux(state
, 1);
1477 static void dib8096p_setDibTxMux(struct dib8000_state
*state
, int mode
)
1479 u16 reg_1288
= dib8000_read_word(state
, 1288) & ~(0x7 << 7);
1483 dprintk("SET MPEG ON DIBSTREAM TX");
1484 dib8096p_cfg_DibTx(state
, 8, 5, 0, 0, 0, 0);
1485 reg_1288
|= (1 << 9); break;
1487 dprintk("SET DIV_OUT ON DIBSTREAM TX");
1488 dib8096p_cfg_DibTx(state
, 5, 5, 0, 0, 0, 0);
1489 reg_1288
|= (1 << 8); break;
1491 dprintk("SET ADC_OUT ON DIBSTREAM TX");
1492 dib8096p_cfg_DibTx(state
, 20, 5, 10, 0, 0, 0);
1493 reg_1288
|= (1 << 7); break;
1497 dib8000_write_word(state
, 1288, reg_1288
);
1500 static void dib8096p_setHostBusMux(struct dib8000_state
*state
, int mode
)
1502 u16 reg_1288
= dib8000_read_word(state
, 1288) & ~(0x7 << 4);
1505 case DEMOUT_ON_HOSTBUS
:
1506 dprintk("SET DEM OUT OLD INTERF ON HOST BUS");
1507 dib8096p_enMpegMux(state
, 0);
1508 reg_1288
|= (1 << 6);
1510 case DIBTX_ON_HOSTBUS
:
1511 dprintk("SET DIBSTREAM TX ON HOST BUS");
1512 dib8096p_enMpegMux(state
, 0);
1513 reg_1288
|= (1 << 5);
1515 case MPEG_ON_HOSTBUS
:
1516 dprintk("SET MPEG MUX ON HOST BUS");
1517 reg_1288
|= (1 << 4);
1522 dib8000_write_word(state
, 1288, reg_1288
);
1525 static int dib8096p_set_diversity_in(struct dvb_frontend
*fe
, int onoff
)
1527 struct dib8000_state
*state
= fe
->demodulator_priv
;
1531 case 0: /* only use the internal way - not the diversity input */
1532 dprintk("%s mode OFF : by default Enable Mpeg INPUT",
1534 /* outputRate = 8 */
1535 dib8096p_cfg_DibRx(state
, 8, 5, 0, 0, 0, 8, 0);
1537 /* Do not divide the serial clock of MPEG MUX in
1538 SERIAL MODE in case input mode MPEG is used */
1539 reg_1287
= dib8000_read_word(state
, 1287);
1540 /* enSerialClkDiv2 == 1 ? */
1541 if ((reg_1287
& 0x1) == 1) {
1542 /* force enSerialClkDiv2 = 0 */
1544 dib8000_write_word(state
, 1287, reg_1287
);
1546 state
->input_mode_mpeg
= 1;
1548 case 1: /* both ways */
1549 case 2: /* only the diversity input */
1550 dprintk("%s ON : Enable diversity INPUT", __func__
);
1551 dib8096p_cfg_DibRx(state
, 5, 5, 0, 0, 0, 0, 0);
1552 state
->input_mode_mpeg
= 0;
1556 dib8000_set_diversity_in(state
->fe
[0], onoff
);
1560 static int dib8096p_set_output_mode(struct dvb_frontend
*fe
, int mode
)
1562 struct dib8000_state
*state
= fe
->demodulator_priv
;
1563 u16 outreg
, smo_mode
, fifo_threshold
;
1564 u8 prefer_mpeg_mux_use
= 1;
1567 state
->output_mode
= mode
;
1568 dib8096p_host_bus_drive(state
, 1);
1570 fifo_threshold
= 1792;
1571 smo_mode
= (dib8000_read_word(state
, 299) & 0x0050) | (1 << 1);
1572 outreg
= dib8000_read_word(state
, 1286) &
1573 ~((1 << 10) | (0x7 << 6) | (1 << 1));
1576 case OUTMODE_HIGH_Z
:
1580 case OUTMODE_MPEG2_SERIAL
:
1581 if (prefer_mpeg_mux_use
) {
1582 dprintk("dib8096P setting output mode TS_SERIAL using Mpeg Mux");
1583 dib8096p_configMpegMux(state
, 3, 1, 1);
1584 dib8096p_setHostBusMux(state
, MPEG_ON_HOSTBUS
);
1585 } else {/* Use Smooth block */
1586 dprintk("dib8096P setting output mode TS_SERIAL using Smooth bloc");
1587 dib8096p_setHostBusMux(state
,
1589 outreg
|= (2 << 6) | (0 << 1);
1593 case OUTMODE_MPEG2_PAR_GATED_CLK
:
1594 if (prefer_mpeg_mux_use
) {
1595 dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Mpeg Mux");
1596 dib8096p_configMpegMux(state
, 2, 0, 0);
1597 dib8096p_setHostBusMux(state
, MPEG_ON_HOSTBUS
);
1598 } else { /* Use Smooth block */
1599 dprintk("dib8096P setting output mode TS_PARALLEL_GATED using Smooth block");
1600 dib8096p_setHostBusMux(state
,
1606 case OUTMODE_MPEG2_PAR_CONT_CLK
: /* Using Smooth block only */
1607 dprintk("dib8096P setting output mode TS_PARALLEL_CONT using Smooth block");
1608 dib8096p_setHostBusMux(state
, DEMOUT_ON_HOSTBUS
);
1612 case OUTMODE_MPEG2_FIFO
:
1613 /* Using Smooth block because not supported
1614 by new Mpeg Mux bloc */
1615 dprintk("dib8096P setting output mode TS_FIFO using Smooth block");
1616 dib8096p_setHostBusMux(state
, DEMOUT_ON_HOSTBUS
);
1618 smo_mode
|= (3 << 1);
1619 fifo_threshold
= 512;
1622 case OUTMODE_DIVERSITY
:
1623 dprintk("dib8096P setting output mode MODE_DIVERSITY");
1624 dib8096p_setDibTxMux(state
, DIV_ON_DIBTX
);
1625 dib8096p_setHostBusMux(state
, DIBTX_ON_HOSTBUS
);
1628 case OUTMODE_ANALOG_ADC
:
1629 dprintk("dib8096P setting output mode MODE_ANALOG_ADC");
1630 dib8096p_setDibTxMux(state
, ADC_ON_DIBTX
);
1631 dib8096p_setHostBusMux(state
, DIBTX_ON_HOSTBUS
);
1635 if (mode
!= OUTMODE_HIGH_Z
)
1638 dprintk("output_mpeg2_in_188_bytes = %d",
1639 state
->cfg
.output_mpeg2_in_188_bytes
);
1640 if (state
->cfg
.output_mpeg2_in_188_bytes
)
1641 smo_mode
|= (1 << 5);
1643 ret
|= dib8000_write_word(state
, 299, smo_mode
);
1644 /* synchronous fread */
1645 ret
|= dib8000_write_word(state
, 299 + 1, fifo_threshold
);
1646 ret
|= dib8000_write_word(state
, 1286, outreg
);
1651 static int map_addr_to_serpar_number(struct i2c_msg
*msg
)
1653 if (msg
->buf
[0] <= 15)
1655 else if (msg
->buf
[0] == 17)
1657 else if (msg
->buf
[0] == 16)
1659 else if (msg
->buf
[0] == 19)
1661 else if (msg
->buf
[0] >= 21 && msg
->buf
[0] <= 25)
1663 else if (msg
->buf
[0] == 28)
1665 else if (msg
->buf
[0] == 99)
1672 static int dib8096p_tuner_write_serpar(struct i2c_adapter
*i2c_adap
,
1673 struct i2c_msg msg
[], int num
)
1675 struct dib8000_state
*state
= i2c_get_adapdata(i2c_adap
);
1678 u16 serpar_num
= msg
[0].buf
[0];
1680 while (n_overflow
== 1 && i
) {
1681 n_overflow
= (dib8000_read_word(state
, 1984) >> 1) & 0x1;
1684 dprintk("Tuner ITF: write busy (overflow)");
1686 dib8000_write_word(state
, 1985, (1 << 6) | (serpar_num
& 0x3f));
1687 dib8000_write_word(state
, 1986, (msg
[0].buf
[1] << 8) | msg
[0].buf
[2]);
1692 static int dib8096p_tuner_read_serpar(struct i2c_adapter
*i2c_adap
,
1693 struct i2c_msg msg
[], int num
)
1695 struct dib8000_state
*state
= i2c_get_adapdata(i2c_adap
);
1696 u8 n_overflow
= 1, n_empty
= 1;
1698 u16 serpar_num
= msg
[0].buf
[0];
1701 while (n_overflow
== 1 && i
) {
1702 n_overflow
= (dib8000_read_word(state
, 1984) >> 1) & 0x1;
1705 dprintk("TunerITF: read busy (overflow)");
1707 dib8000_write_word(state
, 1985, (0<<6) | (serpar_num
&0x3f));
1710 while (n_empty
== 1 && i
) {
1711 n_empty
= dib8000_read_word(state
, 1984)&0x1;
1714 dprintk("TunerITF: read busy (empty)");
1717 read_word
= dib8000_read_word(state
, 1987);
1718 msg
[1].buf
[0] = (read_word
>> 8) & 0xff;
1719 msg
[1].buf
[1] = (read_word
) & 0xff;
1724 static int dib8096p_tuner_rw_serpar(struct i2c_adapter
*i2c_adap
,
1725 struct i2c_msg msg
[], int num
)
1727 if (map_addr_to_serpar_number(&msg
[0]) == 0) {
1728 if (num
== 1) /* write */
1729 return dib8096p_tuner_write_serpar(i2c_adap
, msg
, 1);
1731 return dib8096p_tuner_read_serpar(i2c_adap
, msg
, 2);
1736 static int dib8096p_rw_on_apb(struct i2c_adapter
*i2c_adap
,
1737 struct i2c_msg msg
[], int num
, u16 apb_address
)
1739 struct dib8000_state
*state
= i2c_get_adapdata(i2c_adap
);
1742 if (num
== 1) { /* write */
1743 dib8000_write_word(state
, apb_address
,
1744 ((msg
[0].buf
[1] << 8) | (msg
[0].buf
[2])));
1746 word
= dib8000_read_word(state
, apb_address
);
1747 msg
[1].buf
[0] = (word
>> 8) & 0xff;
1748 msg
[1].buf
[1] = (word
) & 0xff;
1753 static int dib8096p_tuner_xfer(struct i2c_adapter
*i2c_adap
,
1754 struct i2c_msg msg
[], int num
)
1756 struct dib8000_state
*state
= i2c_get_adapdata(i2c_adap
);
1757 u16 apb_address
= 0, word
;
1760 switch (msg
[0].buf
[0]) {
1846 /* get sad sel request */
1847 i
= ((dib8000_read_word(state
, 921) >> 12)&0x3);
1848 word
= dib8000_read_word(state
, 924+i
);
1849 msg
[1].buf
[0] = (word
>> 8) & 0xff;
1850 msg
[1].buf
[1] = (word
) & 0xff;
1853 if (num
== 1) { /* write */
1854 word
= (u16
) ((msg
[0].buf
[1] << 8) |
1856 /* in the VGAMODE Sel are located on bit 0/1 */
1858 word
= (dib8000_read_word(state
, 921) &
1859 ~(3<<12)) | (word
<<12);
1860 /* Set the proper input */
1861 dib8000_write_word(state
, 921, word
);
1866 if (apb_address
!= 0) /* R/W acces via APB */
1867 return dib8096p_rw_on_apb(i2c_adap
, msg
, num
, apb_address
);
1868 else /* R/W access via SERPAR */
1869 return dib8096p_tuner_rw_serpar(i2c_adap
, msg
, num
);
1874 static u32
dib8096p_i2c_func(struct i2c_adapter
*adapter
)
1876 return I2C_FUNC_I2C
;
1879 static struct i2c_algorithm dib8096p_tuner_xfer_algo
= {
1880 .master_xfer
= dib8096p_tuner_xfer
,
1881 .functionality
= dib8096p_i2c_func
,
1884 struct i2c_adapter
*dib8096p_get_i2c_tuner(struct dvb_frontend
*fe
)
1886 struct dib8000_state
*st
= fe
->demodulator_priv
;
1887 return &st
->dib8096p_tuner_adap
;
1889 EXPORT_SYMBOL(dib8096p_get_i2c_tuner
);
1891 int dib8096p_tuner_sleep(struct dvb_frontend
*fe
, int onoff
)
1893 struct dib8000_state
*state
= fe
->demodulator_priv
;
1896 dprintk("sleep dib8096p: %d", onoff
);
1898 en_cur_state
= dib8000_read_word(state
, 1922);
1900 /* LNAs and MIX are ON and therefore it is a valid configuration */
1901 if (en_cur_state
> 0xff)
1902 state
->tuner_enable
= en_cur_state
;
1905 en_cur_state
&= 0x00ff;
1907 if (state
->tuner_enable
!= 0)
1908 en_cur_state
= state
->tuner_enable
;
1911 dib8000_write_word(state
, 1922, en_cur_state
);
1915 EXPORT_SYMBOL(dib8096p_tuner_sleep
);
1917 static const s32 lut_1000ln_mant
[] =
1919 908, 7003, 7090, 7170, 7244, 7313, 7377, 7438, 7495, 7549, 7600
1922 s32
dib8000_get_adc_power(struct dvb_frontend
*fe
, u8 mode
)
1924 struct dib8000_state
*state
= fe
->demodulator_priv
;
1925 u32 ix
= 0, tmp_val
= 0, exp
= 0, mant
= 0;
1928 val
= dib8000_read32(state
, 384);
1931 while (tmp_val
>>= 1)
1933 mant
= (val
* 1000 / (1<<exp
));
1934 ix
= (u8
)((mant
-1000)/100); /* index of the LUT */
1935 val
= (lut_1000ln_mant
[ix
] + 693*(exp
-20) - 6908);
1936 val
= (val
*256)/1000;
1940 EXPORT_SYMBOL(dib8000_get_adc_power
);
1942 int dib8090p_get_dc_power(struct dvb_frontend
*fe
, u8 IQ
)
1944 struct dib8000_state
*state
= fe
->demodulator_priv
;
1949 val
= dib8000_read_word(state
, 403);
1952 val
= dib8000_read_word(state
, 404);
1960 EXPORT_SYMBOL(dib8090p_get_dc_power
);
1962 static void dib8000_update_timf(struct dib8000_state
*state
)
1964 u32 timf
= state
->timf
= dib8000_read32(state
, 435);
1966 dib8000_write_word(state
, 29, (u16
) (timf
>> 16));
1967 dib8000_write_word(state
, 30, (u16
) (timf
& 0xffff));
1968 dprintk("Updated timing frequency: %d (default: %d)", state
->timf
, state
->timf_default
);
1971 u32
dib8000_ctrl_timf(struct dvb_frontend
*fe
, uint8_t op
, uint32_t timf
)
1973 struct dib8000_state
*state
= fe
->demodulator_priv
;
1976 case DEMOD_TIMF_SET
:
1979 case DEMOD_TIMF_UPDATE
:
1980 dib8000_update_timf(state
);
1982 case DEMOD_TIMF_GET
:
1985 dib8000_set_bandwidth(state
->fe
[0], 6000);
1989 EXPORT_SYMBOL(dib8000_ctrl_timf
);
1991 static const u16 adc_target_16dB
[11] = {
1992 (1 << 13) - 825 - 117,
1993 (1 << 13) - 837 - 117,
1994 (1 << 13) - 811 - 117,
1995 (1 << 13) - 766 - 117,
1996 (1 << 13) - 737 - 117,
1997 (1 << 13) - 693 - 117,
1998 (1 << 13) - 648 - 117,
1999 (1 << 13) - 619 - 117,
2000 (1 << 13) - 575 - 117,
2001 (1 << 13) - 531 - 117,
2002 (1 << 13) - 501 - 117
2004 static const u8 permu_seg
[] = { 6, 5, 7, 4, 8, 3, 9, 2, 10, 1, 11, 0, 12 };
2006 static u16
dib8000_set_layer(struct dib8000_state
*state
, u8 layer_index
, u16 max_constellation
)
2008 u8 cr
, constellation
, time_intlv
;
2009 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
2011 switch (c
->layer
[layer_index
].modulation
) {
2027 switch (c
->layer
[layer_index
].fec
) {
2046 if ((c
->layer
[layer_index
].interleaving
> 0) && ((c
->layer
[layer_index
].interleaving
<= 3) || (c
->layer
[layer_index
].interleaving
== 4 && c
->isdbt_sb_mode
== 1)))
2047 time_intlv
= c
->layer
[layer_index
].interleaving
;
2051 dib8000_write_word(state
, 2 + layer_index
, (constellation
<< 10) | ((c
->layer
[layer_index
].segment_count
& 0xf) << 6) | (cr
<< 3) | time_intlv
);
2052 if (c
->layer
[layer_index
].segment_count
> 0) {
2053 switch (max_constellation
) {
2056 if (c
->layer
[layer_index
].modulation
== QAM_16
|| c
->layer
[layer_index
].modulation
== QAM_64
)
2057 max_constellation
= c
->layer
[layer_index
].modulation
;
2060 if (c
->layer
[layer_index
].modulation
== QAM_64
)
2061 max_constellation
= c
->layer
[layer_index
].modulation
;
2066 return max_constellation
;
2069 static const u16 adp_Q64
[4] = {0x0148, 0xfff0, 0x00a4, 0xfff8}; /* P_adp_regul_cnt 0.04, P_adp_noise_cnt -0.002, P_adp_regul_ext 0.02, P_adp_noise_ext -0.001 */
2070 static const u16 adp_Q16
[4] = {0x023d, 0xffdf, 0x00a4, 0xfff0}; /* P_adp_regul_cnt 0.07, P_adp_noise_cnt -0.004, P_adp_regul_ext 0.02, P_adp_noise_ext -0.002 */
2071 static const u16 adp_Qdefault
[4] = {0x099a, 0xffae, 0x0333, 0xfff8}; /* P_adp_regul_cnt 0.3, P_adp_noise_cnt -0.01, P_adp_regul_ext 0.1, P_adp_noise_ext -0.002 */
2072 static u16
dib8000_adp_fine_tune(struct dib8000_state
*state
, u16 max_constellation
)
2074 u16 i
, ana_gain
= 0;
2077 /* channel estimation fine configuration */
2078 switch (max_constellation
) {
2089 adp
= &adp_Qdefault
[0];
2093 for (i
= 0; i
< 4; i
++)
2094 dib8000_write_word(state
, 215 + i
, adp
[i
]);
2099 static void dib8000_update_ana_gain(struct dib8000_state
*state
, u16 ana_gain
)
2103 dib8000_write_word(state
, 116, ana_gain
);
2105 /* update ADC target depending on ana_gain */
2106 if (ana_gain
) { /* set -16dB ADC target for ana_gain=-1 */
2107 for (i
= 0; i
< 10; i
++)
2108 dib8000_write_word(state
, 80 + i
, adc_target_16dB
[i
]);
2109 } else { /* set -22dB ADC target for ana_gain=0 */
2110 for (i
= 0; i
< 10; i
++)
2111 dib8000_write_word(state
, 80 + i
, adc_target_16dB
[i
] - 355);
2115 static void dib8000_load_ana_fe_coefs(struct dib8000_state
*state
, const s16
*ana_fe
)
2119 if (state
->isdbt_cfg_loaded
== 0)
2120 for (mode
= 0; mode
< 24; mode
++)
2121 dib8000_write_word(state
, 117 + mode
, ana_fe
[mode
]);
2124 static const u16 lut_prbs_2k
[14] = {
2125 0, 0x423, 0x009, 0x5C7, 0x7A6, 0x3D8, 0x527, 0x7FF, 0x79B, 0x3D6, 0x3A2, 0x53B, 0x2F4, 0x213
2127 static const u16 lut_prbs_4k
[14] = {
2128 0, 0x208, 0x0C3, 0x7B9, 0x423, 0x5C7, 0x3D8, 0x7FF, 0x3D6, 0x53B, 0x213, 0x029, 0x0D0, 0x48E
2130 static const u16 lut_prbs_8k
[14] = {
2131 0, 0x740, 0x069, 0x7DD, 0x208, 0x7B9, 0x5C7, 0x7FF, 0x53B, 0x029, 0x48E, 0x4C4, 0x367, 0x684
2134 static u16
dib8000_get_init_prbs(struct dib8000_state
*state
, u16 subchannel
)
2136 int sub_channel_prbs_group
= 0;
2138 sub_channel_prbs_group
= (subchannel
/ 3) + 1;
2139 dprintk("sub_channel_prbs_group = %d , subchannel =%d prbs = 0x%04x", sub_channel_prbs_group
, subchannel
, lut_prbs_8k
[sub_channel_prbs_group
]);
2141 switch (state
->fe
[0]->dtv_property_cache
.transmission_mode
) {
2142 case TRANSMISSION_MODE_2K
:
2143 return lut_prbs_2k
[sub_channel_prbs_group
];
2144 case TRANSMISSION_MODE_4K
:
2145 return lut_prbs_4k
[sub_channel_prbs_group
];
2147 case TRANSMISSION_MODE_8K
:
2148 return lut_prbs_8k
[sub_channel_prbs_group
];
2152 static void dib8000_set_13seg_channel(struct dib8000_state
*state
)
2155 u16 coff_pow
= 0x2800;
2157 state
->seg_mask
= 0x1fff; /* All 13 segments enabled */
2159 /* ---- COFF ---- Carloff, the most robust --- */
2160 if (state
->isdbt_cfg_loaded
== 0) { /* if not Sound Broadcasting mode : put default values for 13 segments */
2161 dib8000_write_word(state
, 180, (16 << 6) | 9);
2162 dib8000_write_word(state
, 187, (4 << 12) | (8 << 5) | 0x2);
2164 for (i
= 0; i
< 6; i
++)
2165 dib8000_write_word(state
, 181+i
, coff_pow
);
2167 /* P_ctrl_corm_thres4pre_freq_inh=1, P_ctrl_pre_freq_mode_sat=1 */
2168 /* P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 3, P_pre_freq_win_len=1 */
2169 dib8000_write_word(state
, 338, (1 << 12) | (1 << 10) | (0 << 9) | (3 << 5) | 1);
2171 /* P_ctrl_pre_freq_win_len=8, P_ctrl_pre_freq_thres_lockin=6 */
2172 dib8000_write_word(state
, 340, (8 << 6) | (6 << 0));
2173 /* P_ctrl_pre_freq_thres_lockout=4, P_small_use_tmcc/ac/cp=1 */
2174 dib8000_write_word(state
, 341, (4 << 3) | (1 << 2) | (1 << 1) | (1 << 0));
2176 dib8000_write_word(state
, 228, 0); /* default value */
2177 dib8000_write_word(state
, 265, 31); /* default value */
2178 dib8000_write_word(state
, 205, 0x200f); /* init value */
2182 * make the cpil_coff_lock more robust but slower p_coff_winlen
2183 * 6bits; p_coff_thres_lock 6bits (for coff lock if needed)
2186 if (state
->cfg
.pll
->ifreq
== 0)
2187 dib8000_write_word(state
, 266, ~state
->seg_mask
| state
->seg_diff_mask
| 0x40); /* P_equal_noise_seg_inh */
2189 dib8000_load_ana_fe_coefs(state
, ana_fe_coeff_13seg
);
2192 static void dib8000_set_subchannel_prbs(struct dib8000_state
*state
, u16 init_prbs
)
2196 reg_1
= dib8000_read_word(state
, 1);
2197 dib8000_write_word(state
, 1, (init_prbs
<< 2) | (reg_1
& 0x3)); /* ADDR 1 */
2200 static void dib8000_small_fine_tune(struct dib8000_state
*state
)
2204 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
2206 dib8000_write_word(state
, 352, state
->seg_diff_mask
);
2207 dib8000_write_word(state
, 353, state
->seg_mask
);
2209 /* P_small_coef_ext_enable=ISDB-Tsb, P_small_narrow_band=ISDB-Tsb, P_small_last_seg=13, P_small_offset_num_car=5 */
2210 dib8000_write_word(state
, 351, (c
->isdbt_sb_mode
<< 9) | (c
->isdbt_sb_mode
<< 8) | (13 << 4) | 5);
2212 if (c
->isdbt_sb_mode
) {
2213 /* ---- SMALL ---- */
2214 switch (c
->transmission_mode
) {
2215 case TRANSMISSION_MODE_2K
:
2216 if (c
->isdbt_partial_reception
== 0) { /* 1-seg */
2217 if (c
->layer
[0].modulation
== DQPSK
) /* DQPSK */
2218 ncoeff
= coeff_2k_sb_1seg_dqpsk
;
2219 else /* QPSK or QAM */
2220 ncoeff
= coeff_2k_sb_1seg
;
2221 } else { /* 3-segments */
2222 if (c
->layer
[0].modulation
== DQPSK
) { /* DQPSK on central segment */
2223 if (c
->layer
[1].modulation
== DQPSK
) /* DQPSK on external segments */
2224 ncoeff
= coeff_2k_sb_3seg_0dqpsk_1dqpsk
;
2225 else /* QPSK or QAM on external segments */
2226 ncoeff
= coeff_2k_sb_3seg_0dqpsk
;
2227 } else { /* QPSK or QAM on central segment */
2228 if (c
->layer
[1].modulation
== DQPSK
) /* DQPSK on external segments */
2229 ncoeff
= coeff_2k_sb_3seg_1dqpsk
;
2230 else /* QPSK or QAM on external segments */
2231 ncoeff
= coeff_2k_sb_3seg
;
2235 case TRANSMISSION_MODE_4K
:
2236 if (c
->isdbt_partial_reception
== 0) { /* 1-seg */
2237 if (c
->layer
[0].modulation
== DQPSK
) /* DQPSK */
2238 ncoeff
= coeff_4k_sb_1seg_dqpsk
;
2239 else /* QPSK or QAM */
2240 ncoeff
= coeff_4k_sb_1seg
;
2241 } else { /* 3-segments */
2242 if (c
->layer
[0].modulation
== DQPSK
) { /* DQPSK on central segment */
2243 if (c
->layer
[1].modulation
== DQPSK
) /* DQPSK on external segments */
2244 ncoeff
= coeff_4k_sb_3seg_0dqpsk_1dqpsk
;
2245 else /* QPSK or QAM on external segments */
2246 ncoeff
= coeff_4k_sb_3seg_0dqpsk
;
2247 } else { /* QPSK or QAM on central segment */
2248 if (c
->layer
[1].modulation
== DQPSK
) /* DQPSK on external segments */
2249 ncoeff
= coeff_4k_sb_3seg_1dqpsk
;
2250 else /* QPSK or QAM on external segments */
2251 ncoeff
= coeff_4k_sb_3seg
;
2255 case TRANSMISSION_MODE_AUTO
:
2256 case TRANSMISSION_MODE_8K
:
2258 if (c
->isdbt_partial_reception
== 0) { /* 1-seg */
2259 if (c
->layer
[0].modulation
== DQPSK
) /* DQPSK */
2260 ncoeff
= coeff_8k_sb_1seg_dqpsk
;
2261 else /* QPSK or QAM */
2262 ncoeff
= coeff_8k_sb_1seg
;
2263 } else { /* 3-segments */
2264 if (c
->layer
[0].modulation
== DQPSK
) { /* DQPSK on central segment */
2265 if (c
->layer
[1].modulation
== DQPSK
) /* DQPSK on external segments */
2266 ncoeff
= coeff_8k_sb_3seg_0dqpsk_1dqpsk
;
2267 else /* QPSK or QAM on external segments */
2268 ncoeff
= coeff_8k_sb_3seg_0dqpsk
;
2269 } else { /* QPSK or QAM on central segment */
2270 if (c
->layer
[1].modulation
== DQPSK
) /* DQPSK on external segments */
2271 ncoeff
= coeff_8k_sb_3seg_1dqpsk
;
2272 else /* QPSK or QAM on external segments */
2273 ncoeff
= coeff_8k_sb_3seg
;
2279 for (i
= 0; i
< 8; i
++)
2280 dib8000_write_word(state
, 343 + i
, ncoeff
[i
]);
2284 static const u16 coff_thres_1seg
[3] = {300, 150, 80};
2285 static const u16 coff_thres_3seg
[3] = {350, 300, 250};
2286 static void dib8000_set_sb_channel(struct dib8000_state
*state
)
2288 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
2292 if (c
->transmission_mode
== TRANSMISSION_MODE_2K
|| c
->transmission_mode
== TRANSMISSION_MODE_4K
) {
2293 dib8000_write_word(state
, 219, dib8000_read_word(state
, 219) | 0x1); /* adp_pass =1 */
2294 dib8000_write_word(state
, 190, dib8000_read_word(state
, 190) | (0x1 << 14)); /* pha3_force_pha_shift = 1 */
2296 dib8000_write_word(state
, 219, dib8000_read_word(state
, 219) & 0xfffe); /* adp_pass =0 */
2297 dib8000_write_word(state
, 190, dib8000_read_word(state
, 190) & 0xbfff); /* pha3_force_pha_shift = 0 */
2300 if (c
->isdbt_partial_reception
== 1) /* 3-segments */
2301 state
->seg_mask
= 0x00E0;
2302 else /* 1-segment */
2303 state
->seg_mask
= 0x0040;
2305 dib8000_write_word(state
, 268, (dib8000_read_word(state
, 268) & 0xF9FF) | 0x0200);
2307 /* ---- COFF ---- Carloff, the most robust --- */
2308 /* P_coff_cpil_alpha=4, P_coff_inh=0, P_coff_cpil_winlen=64, P_coff_narrow_band=1, P_coff_square_val=1, P_coff_one_seg=~partial_rcpt, P_coff_use_tmcc=1, P_coff_use_ac=1 */
2309 dib8000_write_word(state
, 187, (4 << 12) | (0 << 11) | (63 << 5) | (0x3 << 3) | ((~c
->isdbt_partial_reception
& 1) << 2) | 0x3);
2311 dib8000_write_word(state
, 340, (16 << 6) | (8 << 0)); /* P_ctrl_pre_freq_win_len=16, P_ctrl_pre_freq_thres_lockin=8 */
2312 dib8000_write_word(state
, 341, (6 << 3) | (1 << 2) | (1 << 1) | (1 << 0));/* P_ctrl_pre_freq_thres_lockout=6, P_small_use_tmcc/ac/cp=1 */
2314 /* Sound Broadcasting mode 1 seg */
2315 if (c
->isdbt_partial_reception
== 0) {
2316 /* P_coff_winlen=63, P_coff_thres_lock=15, P_coff_one_seg_width = (P_mode == 3) , P_coff_one_seg_sym = (P_mode-1) */
2317 if (state
->mode
== 3)
2318 dib8000_write_word(state
, 180, 0x1fcf | ((state
->mode
- 1) << 14));
2320 dib8000_write_word(state
, 180, 0x0fcf | ((state
->mode
- 1) << 14));
2322 /* P_ctrl_corm_thres4pre_freq_inh=1,P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 5, P_pre_freq_win_len=4 */
2323 dib8000_write_word(state
, 338, (1 << 12) | (1 << 10) | (0 << 9) | (5 << 5) | 4);
2324 coff
= &coff_thres_1seg
[0];
2325 } else { /* Sound Broadcasting mode 3 seg */
2326 dib8000_write_word(state
, 180, 0x1fcf | (1 << 14));
2327 /* P_ctrl_corm_thres4pre_freq_inh = 1, P_ctrl_pre_freq_mode_sat=1, P_ctrl_pre_freq_inh=0, P_ctrl_pre_freq_step = 4, P_pre_freq_win_len=4 */
2328 dib8000_write_word(state
, 338, (1 << 12) | (1 << 10) | (0 << 9) | (4 << 5) | 4);
2329 coff
= &coff_thres_3seg
[0];
2332 dib8000_write_word(state
, 228, 1); /* P_2d_mode_byp=1 */
2333 dib8000_write_word(state
, 205, dib8000_read_word(state
, 205) & 0xfff0); /* P_cspu_win_cut = 0 */
2335 if (c
->isdbt_partial_reception
== 0 && c
->transmission_mode
== TRANSMISSION_MODE_2K
)
2336 dib8000_write_word(state
, 265, 15); /* P_equal_noise_sel = 15 */
2338 /* Write COFF thres */
2339 for (i
= 0 ; i
< 3; i
++) {
2340 dib8000_write_word(state
, 181+i
, coff
[i
]);
2341 dib8000_write_word(state
, 184+i
, coff
[i
]);
2345 * make the cpil_coff_lock more robust but slower p_coff_winlen
2346 * 6bits; p_coff_thres_lock 6bits (for coff lock if needed)
2349 dib8000_write_word(state
, 266, ~state
->seg_mask
| state
->seg_diff_mask
); /* P_equal_noise_seg_inh */
2351 if (c
->isdbt_partial_reception
== 0)
2352 dib8000_write_word(state
, 178, 64); /* P_fft_powrange = 64 */
2354 dib8000_write_word(state
, 178, 32); /* P_fft_powrange = 32 */
2357 static void dib8000_set_isdbt_common_channel(struct dib8000_state
*state
, u8 seq
, u8 autosearching
)
2359 u16 p_cfr_left_edge
= 0, p_cfr_right_edge
= 0;
2360 u16 tmcc_pow
= 0, ana_gain
= 0, tmp
= 0, i
= 0, nbseg_diff
= 0 ;
2361 u16 max_constellation
= DQPSK
;
2363 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
2366 dib8000_write_word(state
, 10, (seq
<< 4));
2369 state
->mode
= fft_to_mode(state
);
2372 tmp
= dib8000_read_word(state
, 1);
2373 dib8000_write_word(state
, 1, (tmp
&0xfffc) | (c
->guard_interval
& 0x3));
2375 dib8000_write_word(state
, 274, (dib8000_read_word(state
, 274) & 0xffcf) | ((c
->isdbt_partial_reception
& 1) << 5) | ((c
->isdbt_sb_mode
& 1) << 4));
2377 /* signal optimization parameter */
2378 if (c
->isdbt_partial_reception
) {
2379 state
->seg_diff_mask
= (c
->layer
[0].modulation
== DQPSK
) << permu_seg
[0];
2380 for (i
= 1; i
< 3; i
++)
2381 nbseg_diff
+= (c
->layer
[i
].modulation
== DQPSK
) * c
->layer
[i
].segment_count
;
2382 for (i
= 0; i
< nbseg_diff
; i
++)
2383 state
->seg_diff_mask
|= 1 << permu_seg
[i
+1];
2385 for (i
= 0; i
< 3; i
++)
2386 nbseg_diff
+= (c
->layer
[i
].modulation
== DQPSK
) * c
->layer
[i
].segment_count
;
2387 for (i
= 0; i
< nbseg_diff
; i
++)
2388 state
->seg_diff_mask
|= 1 << permu_seg
[i
];
2391 if (state
->seg_diff_mask
)
2392 dib8000_write_word(state
, 268, (dib8000_read_word(state
, 268) & 0xF9FF) | 0x0200);
2394 dib8000_write_word(state
, 268, (2 << 9) | 39); /*init value */
2396 for (i
= 0; i
< 3; i
++)
2397 max_constellation
= dib8000_set_layer(state
, i
, max_constellation
);
2398 if (autosearching
== 0) {
2399 state
->layer_b_nb_seg
= c
->layer
[1].segment_count
;
2400 state
->layer_c_nb_seg
= c
->layer
[2].segment_count
;
2403 /* WRITE: Mode & Diff mask */
2404 dib8000_write_word(state
, 0, (state
->mode
<< 13) | state
->seg_diff_mask
);
2406 state
->differential_constellation
= (state
->seg_diff_mask
!= 0);
2408 /* channel estimation fine configuration */
2409 ana_gain
= dib8000_adp_fine_tune(state
, max_constellation
);
2411 /* update ana_gain depending on max constellation */
2412 dib8000_update_ana_gain(state
, ana_gain
);
2414 /* ---- ANA_FE ---- */
2415 if (c
->isdbt_partial_reception
) /* 3-segments */
2416 dib8000_load_ana_fe_coefs(state
, ana_fe_coeff_3seg
);
2418 dib8000_load_ana_fe_coefs(state
, ana_fe_coeff_1seg
); /* 1-segment */
2420 /* TSB or ISDBT ? apply it now */
2421 if (c
->isdbt_sb_mode
) {
2422 dib8000_set_sb_channel(state
);
2423 if (c
->isdbt_sb_subchannel
< 14)
2424 init_prbs
= dib8000_get_init_prbs(state
, c
->isdbt_sb_subchannel
);
2428 dib8000_set_13seg_channel(state
);
2433 dib8000_small_fine_tune(state
);
2435 dib8000_set_subchannel_prbs(state
, init_prbs
);
2437 /* ---- CHAN_BLK ---- */
2438 for (i
= 0; i
< 13; i
++) {
2439 if ((((~state
->seg_diff_mask
) >> i
) & 1) == 1) {
2440 p_cfr_left_edge
+= (1 << i
) * ((i
== 0) || ((((state
->seg_mask
& (~state
->seg_diff_mask
)) >> (i
- 1)) & 1) == 0));
2441 p_cfr_right_edge
+= (1 << i
) * ((i
== 12) || ((((state
->seg_mask
& (~state
->seg_diff_mask
)) >> (i
+ 1)) & 1) == 0));
2444 dib8000_write_word(state
, 222, p_cfr_left_edge
); /* p_cfr_left_edge */
2445 dib8000_write_word(state
, 223, p_cfr_right_edge
); /* p_cfr_right_edge */
2446 /* "P_cspu_left_edge" & "P_cspu_right_edge" not used => do not care */
2448 dib8000_write_word(state
, 189, ~state
->seg_mask
| state
->seg_diff_mask
); /* P_lmod4_seg_inh */
2449 dib8000_write_word(state
, 192, ~state
->seg_mask
| state
->seg_diff_mask
); /* P_pha3_seg_inh */
2450 dib8000_write_word(state
, 225, ~state
->seg_mask
| state
->seg_diff_mask
); /* P_tac_seg_inh */
2453 dib8000_write_word(state
, 288, (~state
->seg_mask
| state
->seg_diff_mask
) & 0x1fff); /* P_tmcc_seg_eq_inh */
2455 dib8000_write_word(state
, 288, 0x1fff); /*disable equalisation of the tmcc when autosearch to be able to find the DQPSK channels. */
2457 dib8000_write_word(state
, 211, state
->seg_mask
& (~state
->seg_diff_mask
)); /* P_des_seg_enabled */
2458 dib8000_write_word(state
, 287, ~state
->seg_mask
| 0x1000); /* P_tmcc_seg_inh */
2460 dib8000_write_word(state
, 178, 32); /* P_fft_powrange = 32 */
2462 /* ---- TMCC ---- */
2463 for (i
= 0; i
< 3; i
++)
2464 tmcc_pow
+= (((c
->layer
[i
].modulation
== DQPSK
) * 4 + 1) * c
->layer
[i
].segment_count
) ;
2466 /* Quantif of "P_tmcc_dec_thres_?k" is (0, 5+mode, 9); */
2467 /* Threshold is set at 1/4 of max power. */
2468 tmcc_pow
*= (1 << (9-2));
2469 dib8000_write_word(state
, 290, tmcc_pow
); /* P_tmcc_dec_thres_2k */
2470 dib8000_write_word(state
, 291, tmcc_pow
); /* P_tmcc_dec_thres_4k */
2471 dib8000_write_word(state
, 292, tmcc_pow
); /* P_tmcc_dec_thres_8k */
2472 /*dib8000_write_word(state, 287, (1 << 13) | 0x1000 ); */
2474 /* ---- PHA3 ---- */
2475 if (state
->isdbt_cfg_loaded
== 0)
2476 dib8000_write_word(state
, 250, 3285); /* p_2d_hspeed_thr0 */
2478 state
->isdbt_cfg_loaded
= 0;
2481 static u32
dib8000_wait_lock(struct dib8000_state
*state
, u32 internal
,
2482 u32 wait0_ms
, u32 wait1_ms
, u32 wait2_ms
)
2484 u32 value
= 0; /* P_search_end0 wait time */
2485 u16 reg
= 11; /* P_search_end0 start addr */
2487 for (reg
= 11; reg
< 16; reg
+= 2) {
2489 if (state
->revision
== 0x8090)
2490 value
= internal
* wait1_ms
;
2492 value
= internal
* wait0_ms
;
2493 } else if (reg
== 13)
2494 value
= internal
* wait1_ms
;
2496 value
= internal
* wait2_ms
;
2497 dib8000_write_word(state
, reg
, (u16
)((value
>> 16) & 0xffff));
2498 dib8000_write_word(state
, (reg
+ 1), (u16
)(value
& 0xffff));
2503 static int dib8000_autosearch_start(struct dvb_frontend
*fe
)
2505 struct dib8000_state
*state
= fe
->demodulator_priv
;
2506 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
2508 u32 value
, internal
= state
->cfg
.pll
->internal
;
2510 if (state
->revision
== 0x8090)
2511 internal
= dib8000_read32(state
, 23) / 1000;
2513 if ((state
->revision
>= 0x8002) &&
2514 (state
->autosearch_state
== AS_SEARCHING_FFT
)) {
2515 dib8000_write_word(state
, 37, 0x0065); /* P_ctrl_pha_off_max default values */
2516 dib8000_write_word(state
, 116, 0x0000); /* P_ana_gain to 0 */
2518 dib8000_write_word(state
, 0, (dib8000_read_word(state
, 0) & 0x1fff) | (0 << 13) | (1 << 15)); /* P_mode = 0, P_restart_search=1 */
2519 dib8000_write_word(state
, 1, (dib8000_read_word(state
, 1) & 0xfffc) | 0); /* P_guard = 0 */
2520 dib8000_write_word(state
, 6, 0); /* P_lock0_mask = 0 */
2521 dib8000_write_word(state
, 7, 0); /* P_lock1_mask = 0 */
2522 dib8000_write_word(state
, 8, 0); /* P_lock2_mask = 0 */
2523 dib8000_write_word(state
, 10, (dib8000_read_word(state
, 10) & 0x200) | (16 << 4) | (0 << 0)); /* P_search_list=16, P_search_maxtrial=0 */
2525 if (state
->revision
== 0x8090)
2526 value
= dib8000_wait_lock(state
, internal
, 10, 10, 10); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */
2528 value
= dib8000_wait_lock(state
, internal
, 20, 20, 20); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */
2530 dib8000_write_word(state
, 17, 0);
2531 dib8000_write_word(state
, 18, 200); /* P_search_rstst = 200 */
2532 dib8000_write_word(state
, 19, 0);
2533 dib8000_write_word(state
, 20, 400); /* P_search_rstend = 400 */
2534 dib8000_write_word(state
, 21, (value
>> 16) & 0xffff); /* P_search_checkst */
2535 dib8000_write_word(state
, 22, value
& 0xffff);
2537 if (state
->revision
== 0x8090)
2538 dib8000_write_word(state
, 32, (dib8000_read_word(state
, 32) & 0xf0ff) | (0 << 8)); /* P_corm_alpha = 0 */
2540 dib8000_write_word(state
, 32, (dib8000_read_word(state
, 32) & 0xf0ff) | (9 << 8)); /* P_corm_alpha = 3 */
2541 dib8000_write_word(state
, 355, 2); /* P_search_param_max = 2 */
2543 /* P_search_param_select = (1 | 1<<4 | 1 << 8) */
2544 dib8000_write_word(state
, 356, 0);
2545 dib8000_write_word(state
, 357, 0x111);
2547 dib8000_write_word(state
, 770, (dib8000_read_word(state
, 770) & 0xdfff) | (1 << 13)); /* P_restart_ccg = 1 */
2548 dib8000_write_word(state
, 770, (dib8000_read_word(state
, 770) & 0xdfff) | (0 << 13)); /* P_restart_ccg = 0 */
2549 dib8000_write_word(state
, 0, (dib8000_read_word(state
, 0) & 0x7ff) | (0 << 15) | (1 << 13)); /* P_restart_search = 0; */
2550 } else if ((state
->revision
>= 0x8002) &&
2551 (state
->autosearch_state
== AS_SEARCHING_GUARD
)) {
2552 c
->transmission_mode
= TRANSMISSION_MODE_8K
;
2553 c
->guard_interval
= GUARD_INTERVAL_1_8
;
2555 c
->layer
[0].modulation
= QAM_64
;
2556 c
->layer
[0].fec
= FEC_2_3
;
2557 c
->layer
[0].interleaving
= 0;
2558 c
->layer
[0].segment_count
= 13;
2561 c
->transmission_mode
= state
->found_nfft
;
2563 dib8000_set_isdbt_common_channel(state
, slist
, 1);
2565 /* set lock_mask values */
2566 dib8000_write_word(state
, 6, 0x4);
2567 if (state
->revision
== 0x8090)
2568 dib8000_write_word(state
, 7, ((1 << 12) | (1 << 11) | (1 << 10)));/* tmcc_dec_lock, tmcc_sync_lock, tmcc_data_lock, tmcc_bch_uncor */
2570 dib8000_write_word(state
, 7, 0x8);
2571 dib8000_write_word(state
, 8, 0x1000);
2573 /* set lock_mask wait time values */
2574 if (state
->revision
== 0x8090)
2575 dib8000_wait_lock(state
, internal
, 50, 100, 1000); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */
2577 dib8000_wait_lock(state
, internal
, 50, 200, 1000); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */
2579 dib8000_write_word(state
, 355, 3); /* P_search_param_max = 3 */
2581 /* P_search_param_select = 0xf; look for the 4 different guard intervals */
2582 dib8000_write_word(state
, 356, 0);
2583 dib8000_write_word(state
, 357, 0xf);
2585 value
= dib8000_read_word(state
, 0);
2586 dib8000_write_word(state
, 0, (u16
)((1 << 15) | value
));
2587 dib8000_read_word(state
, 1284); /* reset the INT. n_irq_pending */
2588 dib8000_write_word(state
, 0, (u16
)value
);
2591 c
->layer
[0].modulation
= QAM_64
;
2592 c
->layer
[0].fec
= FEC_2_3
;
2593 c
->layer
[0].interleaving
= 0;
2594 c
->layer
[0].segment_count
= 13;
2595 if (!c
->isdbt_sb_mode
)
2596 c
->layer
[0].segment_count
= 13;
2598 /* choose the right list, in sb, always do everything */
2599 if (c
->isdbt_sb_mode
) {
2601 dib8000_write_word(state
, 0, (dib8000_read_word(state
, 0) & 0x9fff) | (1 << 13));
2603 if (c
->guard_interval
== GUARD_INTERVAL_AUTO
) {
2604 if (c
->transmission_mode
== TRANSMISSION_MODE_AUTO
) {
2605 c
->transmission_mode
= TRANSMISSION_MODE_8K
;
2606 c
->guard_interval
= GUARD_INTERVAL_1_8
;
2608 dib8000_write_word(state
, 0, (dib8000_read_word(state
, 0) & 0x9fff) | (1 << 13)); /* P_mode = 1 to have autosearch start ok with mode2 */
2610 c
->guard_interval
= GUARD_INTERVAL_1_8
;
2614 if (c
->transmission_mode
== TRANSMISSION_MODE_AUTO
) {
2615 c
->transmission_mode
= TRANSMISSION_MODE_8K
;
2617 dib8000_write_word(state
, 0, (dib8000_read_word(state
, 0) & 0x9fff) | (1 << 13)); /* P_mode = 1 */
2622 dprintk("Using list for autosearch : %d", slist
);
2624 dib8000_set_isdbt_common_channel(state
, slist
, 1);
2626 /* set lock_mask values */
2627 dib8000_write_word(state
, 6, 0x4);
2628 if (state
->revision
== 0x8090)
2629 dib8000_write_word(state
, 7, (1 << 12) | (1 << 11) | (1 << 10));
2631 dib8000_write_word(state
, 7, 0x8);
2632 dib8000_write_word(state
, 8, 0x1000);
2634 /* set lock_mask wait time values */
2635 if (state
->revision
== 0x8090)
2636 dib8000_wait_lock(state
, internal
, 50, 200, 1000); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */
2638 dib8000_wait_lock(state
, internal
, 50, 100, 1000); /* time in ms configure P_search_end0 P_search_end1 P_search_end2 */
2640 value
= dib8000_read_word(state
, 0);
2641 dib8000_write_word(state
, 0, (u16
)((1 << 15) | value
));
2642 dib8000_read_word(state
, 1284); /* reset the INT. n_irq_pending */
2643 dib8000_write_word(state
, 0, (u16
)value
);
2648 static int dib8000_autosearch_irq(struct dvb_frontend
*fe
)
2650 struct dib8000_state
*state
= fe
->demodulator_priv
;
2651 u16 irq_pending
= dib8000_read_word(state
, 1284);
2653 if ((state
->revision
>= 0x8002) &&
2654 (state
->autosearch_state
== AS_SEARCHING_FFT
)) {
2655 if (irq_pending
& 0x1) {
2656 dprintk("dib8000_autosearch_irq: max correlation result available");
2660 if (irq_pending
& 0x1) { /* failed */
2661 dprintk("dib8000_autosearch_irq failed");
2665 if (irq_pending
& 0x2) { /* succeeded */
2666 dprintk("dib8000_autosearch_irq succeeded");
2671 return 0; // still pending
2674 static void dib8000_viterbi_state(struct dib8000_state
*state
, u8 onoff
)
2678 tmp
= dib8000_read_word(state
, 771);
2679 if (onoff
) /* start P_restart_chd : channel_decoder */
2680 dib8000_write_word(state
, 771, tmp
& 0xfffd);
2681 else /* stop P_restart_chd : channel_decoder */
2682 dib8000_write_word(state
, 771, tmp
| (1<<1));
2685 static void dib8000_set_dds(struct dib8000_state
*state
, s32 offset_khz
)
2687 s16 unit_khz_dds_val
;
2688 u32 abs_offset_khz
= ABS(offset_khz
);
2689 u32 dds
= state
->cfg
.pll
->ifreq
& 0x1ffffff;
2690 u8 invert
= !!(state
->cfg
.pll
->ifreq
& (1 << 25));
2693 if (state
->revision
== 0x8090) {
2695 unit_khz_dds_val
= (1<<26) / (dib8000_read32(state
, 23) / 1000);
2697 dds
= (1 << 26) - (abs_offset_khz
* unit_khz_dds_val
);
2699 dds
= (abs_offset_khz
* unit_khz_dds_val
);
2702 dds
= (1<<26) - dds
;
2705 unit_khz_dds_val
= (u16
) (67108864 / state
->cfg
.pll
->internal
);
2708 unit_khz_dds_val
*= -1;
2712 dds
-= abs_offset_khz
* unit_khz_dds_val
;
2714 dds
+= abs_offset_khz
* unit_khz_dds_val
;
2717 dprintk("setting a DDS frequency offset of %c%dkHz", invert
? '-' : ' ', dds
/ unit_khz_dds_val
);
2719 if (abs_offset_khz
<= (state
->cfg
.pll
->internal
/ ratio
)) {
2720 /* Max dds offset is the half of the demod freq */
2721 dib8000_write_word(state
, 26, invert
);
2722 dib8000_write_word(state
, 27, (u16
)(dds
>> 16) & 0x1ff);
2723 dib8000_write_word(state
, 28, (u16
)(dds
& 0xffff));
2727 static void dib8000_set_frequency_offset(struct dib8000_state
*state
)
2729 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
2732 int total_dds_offset_khz
;
2734 if (state
->fe
[0]->ops
.tuner_ops
.get_frequency
)
2735 state
->fe
[0]->ops
.tuner_ops
.get_frequency(state
->fe
[0], ¤t_rf
);
2737 current_rf
= c
->frequency
;
2739 total_dds_offset_khz
= (int)current_rf
- (int)c
->frequency
/ 1000;
2741 if (c
->isdbt_sb_mode
) {
2742 state
->subchannel
= c
->isdbt_sb_subchannel
;
2744 i
= dib8000_read_word(state
, 26) & 1; /* P_dds_invspec */
2745 dib8000_write_word(state
, 26, c
->inversion
^ i
);
2747 if (state
->cfg
.pll
->ifreq
== 0) { /* low if tuner */
2748 if ((c
->inversion
^ i
) == 0)
2749 dib8000_write_word(state
, 26, dib8000_read_word(state
, 26) | 1);
2751 if ((c
->inversion
^ i
) == 0)
2752 total_dds_offset_khz
*= -1;
2756 dprintk("%dkhz tuner offset (frequency = %dHz & current_rf = %dHz) total_dds_offset_hz = %d", c
->frequency
- current_rf
, c
->frequency
, current_rf
, total_dds_offset_khz
);
2758 /* apply dds offset now */
2759 dib8000_set_dds(state
, total_dds_offset_khz
);
2762 static u16 LUT_isdbt_symbol_duration
[4] = { 26, 101, 63 };
2764 static u32
dib8000_get_symbol_duration(struct dib8000_state
*state
)
2766 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
2769 switch (c
->transmission_mode
) {
2770 case TRANSMISSION_MODE_2K
:
2773 case TRANSMISSION_MODE_4K
:
2777 case TRANSMISSION_MODE_AUTO
:
2778 case TRANSMISSION_MODE_8K
:
2783 return (LUT_isdbt_symbol_duration
[i
] / (c
->bandwidth_hz
/ 1000)) + 1;
2786 static void dib8000_set_isdbt_loop_params(struct dib8000_state
*state
, enum param_loop_step loop_step
)
2788 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
2789 u16 reg_32
= 0, reg_37
= 0;
2791 switch (loop_step
) {
2793 if (c
->isdbt_sb_mode
) {
2794 if (c
->isdbt_partial_reception
== 0) {
2795 reg_32
= ((11 - state
->mode
) << 12) | (6 << 8) | 0x40; /* P_timf_alpha = (11-P_mode), P_corm_alpha=6, P_corm_thres=0x40 */
2796 reg_37
= (3 << 5) | (0 << 4) | (10 - state
->mode
); /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (10-P_mode) */
2797 } else { /* Sound Broadcasting mode 3 seg */
2798 reg_32
= ((10 - state
->mode
) << 12) | (6 << 8) | 0x60; /* P_timf_alpha = (10-P_mode), P_corm_alpha=6, P_corm_thres=0x60 */
2799 reg_37
= (3 << 5) | (0 << 4) | (9 - state
->mode
); /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = (9-P_mode) */
2801 } else { /* 13-seg start conf offset loop parameters */
2802 reg_32
= ((9 - state
->mode
) << 12) | (6 << 8) | 0x80; /* P_timf_alpha = (9-P_mode, P_corm_alpha=6, P_corm_thres=0x80 */
2803 reg_37
= (3 << 5) | (0 << 4) | (8 - state
->mode
); /* P_ctrl_pha_off_max=3 P_ctrl_sfreq_inh =0 P_ctrl_sfreq_step = 9 */
2807 if (c
->isdbt_sb_mode
) {
2808 if (c
->isdbt_partial_reception
== 0) { /* Sound Broadcasting mode 1 seg */
2809 reg_32
= ((13-state
->mode
) << 12) | (6 << 8) | 0x40; /* P_timf_alpha = (13-P_mode) , P_corm_alpha=6, P_corm_thres=0x40*/
2810 reg_37
= (12-state
->mode
) | ((5 + state
->mode
) << 5);
2811 } else { /* Sound Broadcasting mode 3 seg */
2812 reg_32
= ((12-state
->mode
) << 12) | (6 << 8) | 0x60; /* P_timf_alpha = (12-P_mode) , P_corm_alpha=6, P_corm_thres=0x60 */
2813 reg_37
= (11-state
->mode
) | ((5 + state
->mode
) << 5);
2815 } else { /* 13 seg */
2816 reg_32
= ((11-state
->mode
) << 12) | (6 << 8) | 0x80; /* P_timf_alpha = 8 , P_corm_alpha=6, P_corm_thres=0x80 */
2817 reg_37
= ((5+state
->mode
) << 5) | (10 - state
->mode
);
2821 dib8000_write_word(state
, 32, reg_32
);
2822 dib8000_write_word(state
, 37, reg_37
);
2825 static void dib8000_demod_restart(struct dib8000_state
*state
)
2827 dib8000_write_word(state
, 770, 0x4000);
2828 dib8000_write_word(state
, 770, 0x0000);
2832 static void dib8000_set_sync_wait(struct dib8000_state
*state
)
2834 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
2837 /* P_dvsy_sync_wait - reuse mode */
2838 switch (c
->transmission_mode
) {
2839 case TRANSMISSION_MODE_8K
:
2842 case TRANSMISSION_MODE_4K
:
2846 case TRANSMISSION_MODE_2K
:
2851 if (state
->cfg
.diversity_delay
== 0)
2852 sync_wait
= (sync_wait
* (1 << (c
->guard_interval
)) * 3) / 2 + 48; /* add 50% SFN margin + compensate for one DVSY-fifo */
2854 sync_wait
= (sync_wait
* (1 << (c
->guard_interval
)) * 3) / 2 + state
->cfg
.diversity_delay
; /* add 50% SFN margin + compensate for DVSY-fifo */
2856 dib8000_write_word(state
, 273, (dib8000_read_word(state
, 273) & 0x000f) | (sync_wait
<< 4));
2859 static u32
dib8000_get_timeout(struct dib8000_state
*state
, u32 delay
, enum timeout_mode mode
)
2861 if (mode
== SYMBOL_DEPENDENT_ON
)
2862 return systime() + (delay
* state
->symbol_duration
);
2864 return systime() + delay
;
2867 static s32
dib8000_get_status(struct dvb_frontend
*fe
)
2869 struct dib8000_state
*state
= fe
->demodulator_priv
;
2870 return state
->status
;
2873 enum frontend_tune_state
dib8000_get_tune_state(struct dvb_frontend
*fe
)
2875 struct dib8000_state
*state
= fe
->demodulator_priv
;
2876 return state
->tune_state
;
2878 EXPORT_SYMBOL(dib8000_get_tune_state
);
2880 int dib8000_set_tune_state(struct dvb_frontend
*fe
, enum frontend_tune_state tune_state
)
2882 struct dib8000_state
*state
= fe
->demodulator_priv
;
2884 state
->tune_state
= tune_state
;
2887 EXPORT_SYMBOL(dib8000_set_tune_state
);
2889 static int dib8000_tune_restart_from_demod(struct dvb_frontend
*fe
)
2891 struct dib8000_state
*state
= fe
->demodulator_priv
;
2893 state
->status
= FE_STATUS_TUNE_PENDING
;
2894 state
->tune_state
= CT_DEMOD_START
;
2898 static u16
dib8000_read_lock(struct dvb_frontend
*fe
)
2900 struct dib8000_state
*state
= fe
->demodulator_priv
;
2902 if (state
->revision
== 0x8090)
2903 return dib8000_read_word(state
, 570);
2904 return dib8000_read_word(state
, 568);
2907 static int dib8090p_init_sdram(struct dib8000_state
*state
)
2910 dprintk("init sdram");
2912 reg
= dib8000_read_word(state
, 274) & 0xfff0;
2913 dib8000_write_word(state
, 274, reg
| 0x7); /* P_dintlv_delay_ram = 7 because of MobileSdram */
2915 dib8000_write_word(state
, 1803, (7 << 2));
2917 reg
= dib8000_read_word(state
, 1280);
2918 dib8000_write_word(state
, 1280, reg
| (1 << 2)); /* force restart P_restart_sdram */
2919 dib8000_write_word(state
, 1280, reg
); /* release restart P_restart_sdram */
2925 * is_manual_mode - Check if TMCC should be used for parameters settings
2926 * @c: struct dvb_frontend_properties
2928 * By default, TMCC table should be used for parameter settings on most
2929 * usercases. However, sometimes it is desirable to lock the demod to
2930 * use the manual parameters.
2932 * On manual mode, the current dib8000_tune state machine is very restrict:
2933 * It requires that both per-layer and per-transponder parameters to be
2934 * properly specified, otherwise the device won't lock.
2936 * Check if all those conditions are properly satisfied before allowing
2937 * the device to use the manual frequency lock mode.
2939 static int is_manual_mode(struct dtv_frontend_properties
*c
)
2943 /* Use auto mode on DVB-T compat mode */
2944 if (c
->delivery_system
!= SYS_ISDBT
)
2948 * Transmission mode is only detected on auto mode, currently
2950 if (c
->transmission_mode
== TRANSMISSION_MODE_AUTO
) {
2951 dprintk("transmission mode auto");
2956 * Guard interval is only detected on auto mode, currently
2958 if (c
->guard_interval
== GUARD_INTERVAL_AUTO
) {
2959 dprintk("guard interval auto");
2964 * If no layer is enabled, assume auto mode, as at least one
2965 * layer should be enabled
2967 if (!c
->isdbt_layer_enabled
) {
2968 dprintk("no layer modulation specified");
2973 * Check if the per-layer parameters aren't auto and
2974 * disable a layer if segment count is 0 or invalid.
2976 for (i
= 0; i
< 3; i
++) {
2977 if (!(c
->isdbt_layer_enabled
& 1 << i
))
2980 if ((c
->layer
[i
].segment_count
> 13) ||
2981 (c
->layer
[i
].segment_count
== 0)) {
2982 c
->isdbt_layer_enabled
&= ~(1 << i
);
2986 n_segs
+= c
->layer
[i
].segment_count
;
2988 if ((c
->layer
[i
].modulation
== QAM_AUTO
) ||
2989 (c
->layer
[i
].fec
== FEC_AUTO
)) {
2990 dprintk("layer %c has either modulation or FEC auto",
2997 * Userspace specified a wrong number of segments.
2998 * fallback to auto mode.
3000 if (n_segs
== 0 || n_segs
> 13) {
3001 dprintk("number of segments is invalid");
3005 /* Everything looks ok for manual mode */
3009 static int dib8000_tune(struct dvb_frontend
*fe
)
3011 struct dib8000_state
*state
= fe
->demodulator_priv
;
3012 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
3013 enum frontend_tune_state
*tune_state
= &state
->tune_state
;
3015 u16 locks
, deeper_interleaver
= 0, i
;
3016 int ret
= 1; /* 1 symbol duration (in 100us unit) delay most of the time */
3018 u32
*timeout
= &state
->timeout
;
3019 u32 now
= systime();
3020 #ifdef DIB8000_AGC_FREEZE
3024 u32 corm
[4] = {0, 0, 0, 0};
3025 u8 find_index
, max_value
;
3028 if (*tune_state
< CT_DEMOD_STOP
)
3029 dprintk("IN: context status = %d, TUNE_STATE %d autosearch step = %u systime = %u", state
->channel_parameters_set
, *tune_state
, state
->autosearch_state
, now
);
3032 switch (*tune_state
) {
3033 case CT_DEMOD_START
: /* 30 */
3034 dib8000_reset_stats(fe
);
3036 if (state
->revision
== 0x8090)
3037 dib8090p_init_sdram(state
);
3038 state
->status
= FE_STATUS_TUNE_PENDING
;
3039 state
->channel_parameters_set
= is_manual_mode(c
);
3041 dprintk("Tuning channel on %s search mode",
3042 state
->channel_parameters_set
? "manual" : "auto");
3044 dib8000_viterbi_state(state
, 0); /* force chan dec in restart */
3047 dib8000_write_word(state
, 285, dib8000_read_word(state
, 285) & 0x60);
3049 dib8000_set_frequency_offset(state
);
3050 dib8000_set_bandwidth(fe
, c
->bandwidth_hz
/ 1000);
3052 if (state
->channel_parameters_set
== 0) { /* The channel struct is unknown, search it ! */
3053 #ifdef DIB8000_AGC_FREEZE
3054 if (state
->revision
!= 0x8090) {
3055 state
->agc1_max
= dib8000_read_word(state
, 108);
3056 state
->agc1_min
= dib8000_read_word(state
, 109);
3057 state
->agc2_max
= dib8000_read_word(state
, 110);
3058 state
->agc2_min
= dib8000_read_word(state
, 111);
3059 agc1
= dib8000_read_word(state
, 388);
3060 agc2
= dib8000_read_word(state
, 389);
3061 dib8000_write_word(state
, 108, agc1
);
3062 dib8000_write_word(state
, 109, agc1
);
3063 dib8000_write_word(state
, 110, agc2
);
3064 dib8000_write_word(state
, 111, agc2
);
3067 state
->autosearch_state
= AS_SEARCHING_FFT
;
3068 state
->found_nfft
= TRANSMISSION_MODE_AUTO
;
3069 state
->found_guard
= GUARD_INTERVAL_AUTO
;
3070 *tune_state
= CT_DEMOD_SEARCH_NEXT
;
3071 } else { /* we already know the channel struct so TUNE only ! */
3072 state
->autosearch_state
= AS_DONE
;
3073 *tune_state
= CT_DEMOD_STEP_3
;
3075 state
->symbol_duration
= dib8000_get_symbol_duration(state
);
3078 case CT_DEMOD_SEARCH_NEXT
: /* 51 */
3079 dib8000_autosearch_start(fe
);
3080 if (state
->revision
== 0x8090)
3084 *tune_state
= CT_DEMOD_STEP_1
;
3087 case CT_DEMOD_STEP_1
: /* 31 */
3088 switch (dib8000_autosearch_irq(fe
)) {
3090 state
->status
= FE_STATUS_TUNE_FAILED
;
3091 state
->autosearch_state
= AS_DONE
;
3092 *tune_state
= CT_DEMOD_STOP
; /* else we are done here */
3094 case 2: /* Succes */
3095 state
->status
= FE_STATUS_FFT_SUCCESS
; /* signal to the upper layer, that there was a channel found and the parameters can be read */
3096 *tune_state
= CT_DEMOD_STEP_3
;
3097 if (state
->autosearch_state
== AS_SEARCHING_GUARD
)
3098 *tune_state
= CT_DEMOD_STEP_2
;
3100 state
->autosearch_state
= AS_DONE
;
3102 case 3: /* Autosearch FFT max correlation endded */
3103 *tune_state
= CT_DEMOD_STEP_2
;
3108 case CT_DEMOD_STEP_2
:
3109 switch (state
->autosearch_state
) {
3110 case AS_SEARCHING_FFT
:
3111 /* searching for the correct FFT */
3112 if (state
->revision
== 0x8090) {
3113 corm
[2] = (dib8000_read_word(state
, 596) << 16) | (dib8000_read_word(state
, 597));
3114 corm
[1] = (dib8000_read_word(state
, 598) << 16) | (dib8000_read_word(state
, 599));
3115 corm
[0] = (dib8000_read_word(state
, 600) << 16) | (dib8000_read_word(state
, 601));
3117 corm
[2] = (dib8000_read_word(state
, 594) << 16) | (dib8000_read_word(state
, 595));
3118 corm
[1] = (dib8000_read_word(state
, 596) << 16) | (dib8000_read_word(state
, 597));
3119 corm
[0] = (dib8000_read_word(state
, 598) << 16) | (dib8000_read_word(state
, 599));
3121 /* dprintk("corm fft: %u %u %u", corm[0], corm[1], corm[2]); */
3124 for (find_index
= 1 ; find_index
< 3 ; find_index
++) {
3125 if (corm
[max_value
] < corm
[find_index
])
3126 max_value
= find_index
;
3129 switch (max_value
) {
3131 state
->found_nfft
= TRANSMISSION_MODE_2K
;
3134 state
->found_nfft
= TRANSMISSION_MODE_4K
;
3138 state
->found_nfft
= TRANSMISSION_MODE_8K
;
3141 /* dprintk("Autosearch FFT has found Mode %d", max_value + 1); */
3143 *tune_state
= CT_DEMOD_SEARCH_NEXT
;
3144 state
->autosearch_state
= AS_SEARCHING_GUARD
;
3145 if (state
->revision
== 0x8090)
3150 case AS_SEARCHING_GUARD
:
3151 /* searching for the correct guard interval */
3152 if (state
->revision
== 0x8090)
3153 state
->found_guard
= dib8000_read_word(state
, 572) & 0x3;
3155 state
->found_guard
= dib8000_read_word(state
, 570) & 0x3;
3156 /* dprintk("guard interval found=%i", state->found_guard); */
3158 *tune_state
= CT_DEMOD_STEP_3
;
3161 /* the demod should never be in this state */
3162 state
->status
= FE_STATUS_TUNE_FAILED
;
3163 state
->autosearch_state
= AS_DONE
;
3164 *tune_state
= CT_DEMOD_STOP
; /* else we are done here */
3169 case CT_DEMOD_STEP_3
: /* 33 */
3170 state
->symbol_duration
= dib8000_get_symbol_duration(state
);
3171 dib8000_set_isdbt_loop_params(state
, LOOP_TUNE_1
);
3172 dib8000_set_isdbt_common_channel(state
, 0, 0);/* setting the known channel parameters here */
3173 *tune_state
= CT_DEMOD_STEP_4
;
3176 case CT_DEMOD_STEP_4
: /* (34) */
3177 dib8000_demod_restart(state
);
3179 dib8000_set_sync_wait(state
);
3180 dib8000_set_diversity_in(state
->fe
[0], state
->diversity_onoff
);
3182 locks
= (dib8000_read_word(state
, 180) >> 6) & 0x3f; /* P_coff_winlen ? */
3183 /* coff should lock over P_coff_winlen ofdm symbols : give 3 times this length to lock */
3184 *timeout
= dib8000_get_timeout(state
, 2 * locks
, SYMBOL_DEPENDENT_ON
);
3185 *tune_state
= CT_DEMOD_STEP_5
;
3188 case CT_DEMOD_STEP_5
: /* (35) */
3189 locks
= dib8000_read_lock(fe
);
3190 if (locks
& (0x3 << 11)) { /* coff-lock and off_cpil_lock achieved */
3191 dib8000_update_timf(state
); /* we achieved a coff_cpil_lock - it's time to update the timf */
3192 if (!state
->differential_constellation
) {
3193 /* 2 times lmod4_win_len + 10 symbols (pipe delay after coff + nb to compute a 1st correlation) */
3194 *timeout
= dib8000_get_timeout(state
, (20 * ((dib8000_read_word(state
, 188)>>5)&0x1f)), SYMBOL_DEPENDENT_ON
);
3195 *tune_state
= CT_DEMOD_STEP_7
;
3197 *tune_state
= CT_DEMOD_STEP_8
;
3199 } else if (now
> *timeout
) {
3200 *tune_state
= CT_DEMOD_STEP_6
; /* goto check for diversity input connection */
3204 case CT_DEMOD_STEP_6
: /* (36) if there is an input (diversity) */
3205 if ((state
->fe
[1] != NULL
) && (state
->output_mode
!= OUTMODE_DIVERSITY
)) {
3206 /* if there is a diversity fe in input and this fe is has not already failled : wait here until this this fe has succedeed or failled */
3207 if (dib8000_get_status(state
->fe
[1]) <= FE_STATUS_STD_SUCCESS
) /* Something is locked on the input fe */
3208 *tune_state
= CT_DEMOD_STEP_8
; /* go for mpeg */
3209 else if (dib8000_get_status(state
->fe
[1]) >= FE_STATUS_TUNE_TIME_TOO_SHORT
) { /* fe in input failled also, break the current one */
3210 *tune_state
= CT_DEMOD_STOP
; /* else we are done here ; step 8 will close the loops and exit */
3211 dib8000_viterbi_state(state
, 1); /* start viterbi chandec */
3212 dib8000_set_isdbt_loop_params(state
, LOOP_TUNE_2
);
3213 state
->status
= FE_STATUS_TUNE_FAILED
;
3216 dib8000_viterbi_state(state
, 1); /* start viterbi chandec */
3217 dib8000_set_isdbt_loop_params(state
, LOOP_TUNE_2
);
3218 *tune_state
= CT_DEMOD_STOP
; /* else we are done here ; step 8 will close the loops and exit */
3219 state
->status
= FE_STATUS_TUNE_FAILED
;
3223 case CT_DEMOD_STEP_7
: /* 37 */
3224 locks
= dib8000_read_lock(fe
);
3225 if (locks
& (1<<10)) { /* lmod4_lock */
3226 ret
= 14; /* wait for 14 symbols */
3227 *tune_state
= CT_DEMOD_STEP_8
;
3228 } else if (now
> *timeout
)
3229 *tune_state
= CT_DEMOD_STEP_6
; /* goto check for diversity input connection */
3232 case CT_DEMOD_STEP_8
: /* 38 */
3233 dib8000_viterbi_state(state
, 1); /* start viterbi chandec */
3234 dib8000_set_isdbt_loop_params(state
, LOOP_TUNE_2
);
3236 /* mpeg will never lock on this condition because init_prbs is not set : search for it !*/
3237 if (c
->isdbt_sb_mode
3238 && c
->isdbt_sb_subchannel
< 14
3239 && !state
->differential_constellation
) {
3240 state
->subchannel
= 0;
3241 *tune_state
= CT_DEMOD_STEP_11
;
3243 *tune_state
= CT_DEMOD_STEP_9
;
3244 state
->status
= FE_STATUS_LOCKED
;
3248 case CT_DEMOD_STEP_9
: /* 39 */
3249 if ((state
->revision
== 0x8090) || ((dib8000_read_word(state
, 1291) >> 9) & 0x1)) { /* fe capable of deinterleaving : esram */
3250 /* defines timeout for mpeg lock depending on interleaver length of longest layer */
3251 for (i
= 0; i
< 3; i
++) {
3252 if (c
->layer
[i
].interleaving
>= deeper_interleaver
) {
3253 dprintk("layer%i: time interleaver = %d ", i
, c
->layer
[i
].interleaving
);
3254 if (c
->layer
[i
].segment_count
> 0) { /* valid layer */
3255 deeper_interleaver
= c
->layer
[0].interleaving
;
3256 state
->longest_intlv_layer
= i
;
3261 if (deeper_interleaver
== 0)
3262 locks
= 2; /* locks is the tmp local variable name */
3263 else if (deeper_interleaver
== 3)
3266 locks
= 2 * deeper_interleaver
;
3268 if (state
->diversity_onoff
!= 0) /* because of diversity sync */
3271 *timeout
= now
+ (2000 * locks
); /* give the mpeg lock 800ms if sram is present */
3272 dprintk("Deeper interleaver mode = %d on layer %d : timeout mult factor = %d => will use timeout = %d", deeper_interleaver
, state
->longest_intlv_layer
, locks
, *timeout
);
3274 *tune_state
= CT_DEMOD_STEP_10
;
3276 *tune_state
= CT_DEMOD_STOP
;
3279 case CT_DEMOD_STEP_10
: /* 40 */
3280 locks
= dib8000_read_lock(fe
);
3281 if (locks
&(1<<(7-state
->longest_intlv_layer
))) { /* mpeg lock : check the longest one */
3282 dprintk("Mpeg locks [ L0 : %d | L1 : %d | L2 : %d ]", (locks
>>7)&0x1, (locks
>>6)&0x1, (locks
>>5)&0x1);
3283 if (c
->isdbt_sb_mode
3284 && c
->isdbt_sb_subchannel
< 14
3285 && !state
->differential_constellation
)
3286 /* signal to the upper layer, that there was a channel found and the parameters can be read */
3287 state
->status
= FE_STATUS_DEMOD_SUCCESS
;
3289 state
->status
= FE_STATUS_DATA_LOCKED
;
3290 *tune_state
= CT_DEMOD_STOP
;
3291 } else if (now
> *timeout
) {
3292 if (c
->isdbt_sb_mode
3293 && c
->isdbt_sb_subchannel
< 14
3294 && !state
->differential_constellation
) { /* continue to try init prbs autosearch */
3295 state
->subchannel
+= 3;
3296 *tune_state
= CT_DEMOD_STEP_11
;
3297 } else { /* we are done mpeg of the longest interleaver xas not locking but let's try if an other layer has locked in the same time */
3298 if (locks
& (0x7<<5)) {
3299 dprintk("Mpeg locks [ L0 : %d | L1 : %d | L2 : %d ]", (locks
>>7)&0x1, (locks
>>6)&0x1, (locks
>>5)&0x1);
3300 state
->status
= FE_STATUS_DATA_LOCKED
;
3302 state
->status
= FE_STATUS_TUNE_FAILED
;
3303 *tune_state
= CT_DEMOD_STOP
;
3308 case CT_DEMOD_STEP_11
: /* 41 : init prbs autosearch */
3309 if (state
->subchannel
<= 41) {
3310 dib8000_set_subchannel_prbs(state
, dib8000_get_init_prbs(state
, state
->subchannel
));
3311 *tune_state
= CT_DEMOD_STEP_9
;
3313 *tune_state
= CT_DEMOD_STOP
;
3314 state
->status
= FE_STATUS_TUNE_FAILED
;
3322 /* tuning is finished - cleanup the demod */
3323 switch (*tune_state
) {
3324 case CT_DEMOD_STOP
: /* (42) */
3325 #ifdef DIB8000_AGC_FREEZE
3326 if ((state
->revision
!= 0x8090) && (state
->agc1_max
!= 0)) {
3327 dib8000_write_word(state
, 108, state
->agc1_max
);
3328 dib8000_write_word(state
, 109, state
->agc1_min
);
3329 dib8000_write_word(state
, 110, state
->agc2_max
);
3330 dib8000_write_word(state
, 111, state
->agc2_min
);
3331 state
->agc1_max
= 0;
3332 state
->agc1_min
= 0;
3333 state
->agc2_max
= 0;
3334 state
->agc2_min
= 0;
3337 ret
= FE_CALLBACK_TIME_NEVER
;
3343 if ((ret
> 0) && (*tune_state
> CT_DEMOD_STEP_3
))
3344 return ret
* state
->symbol_duration
;
3345 if ((ret
> 0) && (ret
< state
->symbol_duration
))
3346 return state
->symbol_duration
; /* at least one symbol */
3350 static int dib8000_wakeup(struct dvb_frontend
*fe
)
3352 struct dib8000_state
*state
= fe
->demodulator_priv
;
3356 dib8000_set_power_mode(state
, DIB8000_POWER_ALL
);
3357 dib8000_set_adc_state(state
, DIBX000_ADC_ON
);
3358 if (dib8000_set_adc_state(state
, DIBX000_SLOW_ADC_ON
) != 0)
3359 dprintk("could not start Slow ADC");
3361 if (state
->revision
== 0x8090)
3362 dib8000_sad_calib(state
);
3364 for (index_frontend
= 1; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++) {
3365 ret
= state
->fe
[index_frontend
]->ops
.init(state
->fe
[index_frontend
]);
3373 static int dib8000_sleep(struct dvb_frontend
*fe
)
3375 struct dib8000_state
*state
= fe
->demodulator_priv
;
3379 for (index_frontend
= 1; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++) {
3380 ret
= state
->fe
[index_frontend
]->ops
.sleep(state
->fe
[index_frontend
]);
3385 if (state
->revision
!= 0x8090)
3386 dib8000_set_output_mode(fe
, OUTMODE_HIGH_Z
);
3387 dib8000_set_power_mode(state
, DIB8000_POWER_INTERFACE_ONLY
);
3388 return dib8000_set_adc_state(state
, DIBX000_SLOW_ADC_OFF
) | dib8000_set_adc_state(state
, DIBX000_ADC_OFF
);
3391 static int dib8000_read_status(struct dvb_frontend
*fe
, fe_status_t
* stat
);
3393 static int dib8000_get_frontend(struct dvb_frontend
*fe
)
3395 struct dib8000_state
*state
= fe
->demodulator_priv
;
3397 fe_status_t stat
= 0;
3398 u8 index_frontend
, sub_index_frontend
;
3400 fe
->dtv_property_cache
.bandwidth_hz
= 6000000;
3403 * If called to early, get_frontend makes dib8000_tune to either
3404 * not lock or not sync. This causes dvbv5-scan/dvbv5-zap to fail.
3405 * So, let's just return if frontend 0 has not locked.
3407 dib8000_read_status(fe
, &stat
);
3408 if (!(stat
& FE_HAS_SYNC
))
3411 dprintk("TMCC lock");
3412 for (index_frontend
= 1; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++) {
3413 state
->fe
[index_frontend
]->ops
.read_status(state
->fe
[index_frontend
], &stat
);
3414 if (stat
&FE_HAS_SYNC
) {
3415 dprintk("TMCC lock on the slave%i", index_frontend
);
3416 /* synchronize the cache with the other frontends */
3417 state
->fe
[index_frontend
]->ops
.get_frontend(state
->fe
[index_frontend
]);
3418 for (sub_index_frontend
= 0; (sub_index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[sub_index_frontend
] != NULL
); sub_index_frontend
++) {
3419 if (sub_index_frontend
!= index_frontend
) {
3420 state
->fe
[sub_index_frontend
]->dtv_property_cache
.isdbt_sb_mode
= state
->fe
[index_frontend
]->dtv_property_cache
.isdbt_sb_mode
;
3421 state
->fe
[sub_index_frontend
]->dtv_property_cache
.inversion
= state
->fe
[index_frontend
]->dtv_property_cache
.inversion
;
3422 state
->fe
[sub_index_frontend
]->dtv_property_cache
.transmission_mode
= state
->fe
[index_frontend
]->dtv_property_cache
.transmission_mode
;
3423 state
->fe
[sub_index_frontend
]->dtv_property_cache
.guard_interval
= state
->fe
[index_frontend
]->dtv_property_cache
.guard_interval
;
3424 state
->fe
[sub_index_frontend
]->dtv_property_cache
.isdbt_partial_reception
= state
->fe
[index_frontend
]->dtv_property_cache
.isdbt_partial_reception
;
3425 for (i
= 0; i
< 3; i
++) {
3426 state
->fe
[sub_index_frontend
]->dtv_property_cache
.layer
[i
].segment_count
= state
->fe
[index_frontend
]->dtv_property_cache
.layer
[i
].segment_count
;
3427 state
->fe
[sub_index_frontend
]->dtv_property_cache
.layer
[i
].interleaving
= state
->fe
[index_frontend
]->dtv_property_cache
.layer
[i
].interleaving
;
3428 state
->fe
[sub_index_frontend
]->dtv_property_cache
.layer
[i
].fec
= state
->fe
[index_frontend
]->dtv_property_cache
.layer
[i
].fec
;
3429 state
->fe
[sub_index_frontend
]->dtv_property_cache
.layer
[i
].modulation
= state
->fe
[index_frontend
]->dtv_property_cache
.layer
[i
].modulation
;
3437 fe
->dtv_property_cache
.isdbt_sb_mode
= dib8000_read_word(state
, 508) & 0x1;
3439 if (state
->revision
== 0x8090)
3440 val
= dib8000_read_word(state
, 572);
3442 val
= dib8000_read_word(state
, 570);
3443 fe
->dtv_property_cache
.inversion
= (val
& 0x40) >> 6;
3444 switch ((val
& 0x30) >> 4) {
3446 fe
->dtv_property_cache
.transmission_mode
= TRANSMISSION_MODE_2K
;
3450 fe
->dtv_property_cache
.transmission_mode
= TRANSMISSION_MODE_8K
;
3454 switch (val
& 0x3) {
3456 fe
->dtv_property_cache
.guard_interval
= GUARD_INTERVAL_1_32
;
3457 dprintk("dib8000_get_frontend GI = 1/32 ");
3460 fe
->dtv_property_cache
.guard_interval
= GUARD_INTERVAL_1_16
;
3461 dprintk("dib8000_get_frontend GI = 1/16 ");
3464 dprintk("dib8000_get_frontend GI = 1/8 ");
3465 fe
->dtv_property_cache
.guard_interval
= GUARD_INTERVAL_1_8
;
3468 dprintk("dib8000_get_frontend GI = 1/4 ");
3469 fe
->dtv_property_cache
.guard_interval
= GUARD_INTERVAL_1_4
;
3473 val
= dib8000_read_word(state
, 505);
3474 fe
->dtv_property_cache
.isdbt_partial_reception
= val
& 1;
3475 dprintk("dib8000_get_frontend : partial_reception = %d ", fe
->dtv_property_cache
.isdbt_partial_reception
);
3477 for (i
= 0; i
< 3; i
++) {
3478 val
= dib8000_read_word(state
, 493 + i
);
3479 fe
->dtv_property_cache
.layer
[i
].segment_count
= val
& 0x0F;
3480 dprintk("dib8000_get_frontend : Layer %d segments = %d ", i
, fe
->dtv_property_cache
.layer
[i
].segment_count
);
3482 val
= dib8000_read_word(state
, 499 + i
) & 0x3;
3483 /* Interleaving can be 0, 1, 2 or 4 */
3486 fe
->dtv_property_cache
.layer
[i
].interleaving
= val
;
3487 dprintk("dib8000_get_frontend : Layer %d time_intlv = %d ",
3488 i
, fe
->dtv_property_cache
.layer
[i
].interleaving
);
3490 val
= dib8000_read_word(state
, 481 + i
);
3491 switch (val
& 0x7) {
3493 fe
->dtv_property_cache
.layer
[i
].fec
= FEC_1_2
;
3494 dprintk("dib8000_get_frontend : Layer %d Code Rate = 1/2 ", i
);
3497 fe
->dtv_property_cache
.layer
[i
].fec
= FEC_2_3
;
3498 dprintk("dib8000_get_frontend : Layer %d Code Rate = 2/3 ", i
);
3501 fe
->dtv_property_cache
.layer
[i
].fec
= FEC_3_4
;
3502 dprintk("dib8000_get_frontend : Layer %d Code Rate = 3/4 ", i
);
3505 fe
->dtv_property_cache
.layer
[i
].fec
= FEC_5_6
;
3506 dprintk("dib8000_get_frontend : Layer %d Code Rate = 5/6 ", i
);
3509 fe
->dtv_property_cache
.layer
[i
].fec
= FEC_7_8
;
3510 dprintk("dib8000_get_frontend : Layer %d Code Rate = 7/8 ", i
);
3514 val
= dib8000_read_word(state
, 487 + i
);
3515 switch (val
& 0x3) {
3517 dprintk("dib8000_get_frontend : Layer %d DQPSK ", i
);
3518 fe
->dtv_property_cache
.layer
[i
].modulation
= DQPSK
;
3521 fe
->dtv_property_cache
.layer
[i
].modulation
= QPSK
;
3522 dprintk("dib8000_get_frontend : Layer %d QPSK ", i
);
3525 fe
->dtv_property_cache
.layer
[i
].modulation
= QAM_16
;
3526 dprintk("dib8000_get_frontend : Layer %d QAM16 ", i
);
3530 dprintk("dib8000_get_frontend : Layer %d QAM64 ", i
);
3531 fe
->dtv_property_cache
.layer
[i
].modulation
= QAM_64
;
3536 /* synchronize the cache with the other frontends */
3537 for (index_frontend
= 1; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++) {
3538 state
->fe
[index_frontend
]->dtv_property_cache
.isdbt_sb_mode
= fe
->dtv_property_cache
.isdbt_sb_mode
;
3539 state
->fe
[index_frontend
]->dtv_property_cache
.inversion
= fe
->dtv_property_cache
.inversion
;
3540 state
->fe
[index_frontend
]->dtv_property_cache
.transmission_mode
= fe
->dtv_property_cache
.transmission_mode
;
3541 state
->fe
[index_frontend
]->dtv_property_cache
.guard_interval
= fe
->dtv_property_cache
.guard_interval
;
3542 state
->fe
[index_frontend
]->dtv_property_cache
.isdbt_partial_reception
= fe
->dtv_property_cache
.isdbt_partial_reception
;
3543 for (i
= 0; i
< 3; i
++) {
3544 state
->fe
[index_frontend
]->dtv_property_cache
.layer
[i
].segment_count
= fe
->dtv_property_cache
.layer
[i
].segment_count
;
3545 state
->fe
[index_frontend
]->dtv_property_cache
.layer
[i
].interleaving
= fe
->dtv_property_cache
.layer
[i
].interleaving
;
3546 state
->fe
[index_frontend
]->dtv_property_cache
.layer
[i
].fec
= fe
->dtv_property_cache
.layer
[i
].fec
;
3547 state
->fe
[index_frontend
]->dtv_property_cache
.layer
[i
].modulation
= fe
->dtv_property_cache
.layer
[i
].modulation
;
3553 static int dib8000_set_frontend(struct dvb_frontend
*fe
)
3555 struct dib8000_state
*state
= fe
->demodulator_priv
;
3556 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
3557 int l
, i
, active
, time
, time_slave
= FE_CALLBACK_TIME_NEVER
;
3558 u8 exit_condition
, index_frontend
;
3559 u32 delay
, callback_time
;
3561 if (c
->frequency
== 0) {
3562 dprintk("dib8000: must at least specify frequency ");
3566 if (c
->bandwidth_hz
== 0) {
3567 dprintk("dib8000: no bandwidth specified, set to default ");
3568 c
->bandwidth_hz
= 6000000;
3571 for (index_frontend
= 0; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++) {
3572 /* synchronization of the cache */
3573 state
->fe
[index_frontend
]->dtv_property_cache
.delivery_system
= SYS_ISDBT
;
3574 memcpy(&state
->fe
[index_frontend
]->dtv_property_cache
, &fe
->dtv_property_cache
, sizeof(struct dtv_frontend_properties
));
3576 /* set output mode and diversity input */
3577 if (state
->revision
!= 0x8090) {
3578 dib8000_set_diversity_in(state
->fe
[index_frontend
], 1);
3579 if (index_frontend
!= 0)
3580 dib8000_set_output_mode(state
->fe
[index_frontend
],
3583 dib8000_set_output_mode(state
->fe
[0], OUTMODE_HIGH_Z
);
3585 dib8096p_set_diversity_in(state
->fe
[index_frontend
], 1);
3586 if (index_frontend
!= 0)
3587 dib8096p_set_output_mode(state
->fe
[index_frontend
],
3590 dib8096p_set_output_mode(state
->fe
[0], OUTMODE_HIGH_Z
);
3593 /* tune the tuner */
3594 if (state
->fe
[index_frontend
]->ops
.tuner_ops
.set_params
)
3595 state
->fe
[index_frontend
]->ops
.tuner_ops
.set_params(state
->fe
[index_frontend
]);
3597 dib8000_set_tune_state(state
->fe
[index_frontend
], CT_AGC_START
);
3600 /* turn off the diversity of the last chip */
3601 if (state
->revision
!= 0x8090)
3602 dib8000_set_diversity_in(state
->fe
[index_frontend
- 1], 0);
3604 dib8096p_set_diversity_in(state
->fe
[index_frontend
- 1], 0);
3606 /* start up the AGC */
3608 time
= dib8000_agc_startup(state
->fe
[0]);
3609 for (index_frontend
= 1; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++) {
3610 time_slave
= dib8000_agc_startup(state
->fe
[index_frontend
]);
3611 if (time
== FE_CALLBACK_TIME_NEVER
)
3613 else if ((time_slave
!= FE_CALLBACK_TIME_NEVER
) && (time_slave
> time
))
3616 if (time
!= FE_CALLBACK_TIME_NEVER
)
3621 for (index_frontend
= 0; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++) {
3622 if (dib8000_get_tune_state(state
->fe
[index_frontend
]) != CT_AGC_STOP
) {
3627 } while (exit_condition
== 0);
3629 for (index_frontend
= 0; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++)
3630 dib8000_set_tune_state(state
->fe
[index_frontend
], CT_DEMOD_START
);
3634 callback_time
= FE_CALLBACK_TIME_NEVER
;
3635 for (index_frontend
= 0; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++) {
3636 delay
= dib8000_tune(state
->fe
[index_frontend
]);
3637 if (delay
!= FE_CALLBACK_TIME_NEVER
)
3640 /* we are in autosearch */
3641 if (state
->channel_parameters_set
== 0) { /* searching */
3642 if ((dib8000_get_status(state
->fe
[index_frontend
]) == FE_STATUS_DEMOD_SUCCESS
) || (dib8000_get_status(state
->fe
[index_frontend
]) == FE_STATUS_FFT_SUCCESS
)) {
3643 dprintk("autosearch succeeded on fe%i", index_frontend
);
3644 dib8000_get_frontend(state
->fe
[index_frontend
]); /* we read the channel parameters from the frontend which was successful */
3645 state
->channel_parameters_set
= 1;
3647 for (l
= 0; (l
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[l
] != NULL
); l
++) {
3648 if (l
!= index_frontend
) { /* and for all frontend except the successful one */
3649 dib8000_tune_restart_from_demod(state
->fe
[l
]);
3651 state
->fe
[l
]->dtv_property_cache
.isdbt_sb_mode
= state
->fe
[index_frontend
]->dtv_property_cache
.isdbt_sb_mode
;
3652 state
->fe
[l
]->dtv_property_cache
.inversion
= state
->fe
[index_frontend
]->dtv_property_cache
.inversion
;
3653 state
->fe
[l
]->dtv_property_cache
.transmission_mode
= state
->fe
[index_frontend
]->dtv_property_cache
.transmission_mode
;
3654 state
->fe
[l
]->dtv_property_cache
.guard_interval
= state
->fe
[index_frontend
]->dtv_property_cache
.guard_interval
;
3655 state
->fe
[l
]->dtv_property_cache
.isdbt_partial_reception
= state
->fe
[index_frontend
]->dtv_property_cache
.isdbt_partial_reception
;
3656 for (i
= 0; i
< 3; i
++) {
3657 state
->fe
[l
]->dtv_property_cache
.layer
[i
].segment_count
= state
->fe
[index_frontend
]->dtv_property_cache
.layer
[i
].segment_count
;
3658 state
->fe
[l
]->dtv_property_cache
.layer
[i
].interleaving
= state
->fe
[index_frontend
]->dtv_property_cache
.layer
[i
].interleaving
;
3659 state
->fe
[l
]->dtv_property_cache
.layer
[i
].fec
= state
->fe
[index_frontend
]->dtv_property_cache
.layer
[i
].fec
;
3660 state
->fe
[l
]->dtv_property_cache
.layer
[i
].modulation
= state
->fe
[index_frontend
]->dtv_property_cache
.layer
[i
].modulation
;
3667 if (delay
< callback_time
)
3668 callback_time
= delay
;
3670 /* tuning is done when the master frontend is done (failed or success) */
3671 if (dib8000_get_status(state
->fe
[0]) == FE_STATUS_TUNE_FAILED
||
3672 dib8000_get_status(state
->fe
[0]) == FE_STATUS_LOCKED
||
3673 dib8000_get_status(state
->fe
[0]) == FE_STATUS_DATA_LOCKED
) {
3675 /* we need to wait for all frontends to be finished */
3676 for (index_frontend
= 0; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++) {
3677 if (dib8000_get_tune_state(state
->fe
[index_frontend
]) != CT_DEMOD_STOP
)
3681 dprintk("tuning done with status %d", dib8000_get_status(state
->fe
[0]));
3684 if ((active
== 1) && (callback_time
== FE_CALLBACK_TIME_NEVER
)) {
3685 dprintk("strange callback time something went wrong");
3689 while ((active
== 1) && (systime() < callback_time
))
3693 /* set output mode */
3694 if (state
->revision
!= 0x8090)
3695 dib8000_set_output_mode(state
->fe
[0], state
->cfg
.output_mode
);
3697 dib8096p_set_output_mode(state
->fe
[0], state
->cfg
.output_mode
);
3698 if (state
->cfg
.enMpegOutput
== 0) {
3699 dib8096p_setDibTxMux(state
, MPEG_ON_DIBTX
);
3700 dib8096p_setHostBusMux(state
, DIBTX_ON_HOSTBUS
);
3707 static int dib8000_get_stats(struct dvb_frontend
*fe
, fe_status_t stat
);
3709 static int dib8000_read_status(struct dvb_frontend
*fe
, fe_status_t
* stat
)
3711 struct dib8000_state
*state
= fe
->demodulator_priv
;
3712 u16 lock_slave
= 0, lock
;
3715 lock
= dib8000_read_lock(fe
);
3716 for (index_frontend
= 1; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++)
3717 lock_slave
|= dib8000_read_lock(state
->fe
[index_frontend
]);
3721 if (((lock
>> 13) & 1) || ((lock_slave
>> 13) & 1))
3722 *stat
|= FE_HAS_SIGNAL
;
3724 if (((lock
>> 8) & 1) || ((lock_slave
>> 8) & 1)) /* Equal */
3725 *stat
|= FE_HAS_CARRIER
;
3727 if ((((lock
>> 1) & 0xf) == 0xf) || (((lock_slave
>> 1) & 0xf) == 0xf)) /* TMCC_SYNC */
3728 *stat
|= FE_HAS_SYNC
;
3730 if ((((lock
>> 12) & 1) || ((lock_slave
>> 12) & 1)) && ((lock
>> 5) & 7)) /* FEC MPEG */
3731 *stat
|= FE_HAS_LOCK
;
3733 if (((lock
>> 12) & 1) || ((lock_slave
>> 12) & 1)) {
3734 lock
= dib8000_read_word(state
, 554); /* Viterbi Layer A */
3736 *stat
|= FE_HAS_VITERBI
;
3738 lock
= dib8000_read_word(state
, 555); /* Viterbi Layer B */
3740 *stat
|= FE_HAS_VITERBI
;
3742 lock
= dib8000_read_word(state
, 556); /* Viterbi Layer C */
3744 *stat
|= FE_HAS_VITERBI
;
3746 dib8000_get_stats(fe
, *stat
);
3751 static int dib8000_read_ber(struct dvb_frontend
*fe
, u32
* ber
)
3753 struct dib8000_state
*state
= fe
->demodulator_priv
;
3756 if (state
->revision
== 0x8090)
3757 *ber
= (dib8000_read_word(state
, 562) << 16) |
3758 dib8000_read_word(state
, 563);
3760 *ber
= (dib8000_read_word(state
, 560) << 16) |
3761 dib8000_read_word(state
, 561);
3765 static int dib8000_read_unc_blocks(struct dvb_frontend
*fe
, u32
* unc
)
3767 struct dib8000_state
*state
= fe
->demodulator_priv
;
3769 /* packet error on 13 seg */
3770 if (state
->revision
== 0x8090)
3771 *unc
= dib8000_read_word(state
, 567);
3773 *unc
= dib8000_read_word(state
, 565);
3777 static int dib8000_read_signal_strength(struct dvb_frontend
*fe
, u16
* strength
)
3779 struct dib8000_state
*state
= fe
->demodulator_priv
;
3784 for (index_frontend
= 1; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++) {
3785 state
->fe
[index_frontend
]->ops
.read_signal_strength(state
->fe
[index_frontend
], &val
);
3786 if (val
> 65535 - *strength
)
3792 val
= 65535 - dib8000_read_word(state
, 390);
3793 if (val
> 65535 - *strength
)
3800 static u32
dib8000_get_snr(struct dvb_frontend
*fe
)
3802 struct dib8000_state
*state
= fe
->demodulator_priv
;
3806 if (state
->revision
!= 0x8090)
3807 val
= dib8000_read_word(state
, 542);
3809 val
= dib8000_read_word(state
, 544);
3810 n
= (val
>> 6) & 0xff;
3812 if ((exp
& 0x20) != 0)
3816 if (state
->revision
!= 0x8090)
3817 val
= dib8000_read_word(state
, 543);
3819 val
= dib8000_read_word(state
, 545);
3820 s
= (val
>> 6) & 0xff;
3822 if ((exp
& 0x20) != 0)
3827 u32 t
= (s
/n
) << 16;
3828 return t
+ ((s
<< 16) - n
*t
) / n
;
3833 static int dib8000_read_snr(struct dvb_frontend
*fe
, u16
* snr
)
3835 struct dib8000_state
*state
= fe
->demodulator_priv
;
3839 snr_master
= dib8000_get_snr(fe
);
3840 for (index_frontend
= 1; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
); index_frontend
++)
3841 snr_master
+= dib8000_get_snr(state
->fe
[index_frontend
]);
3843 if ((snr_master
>> 16) != 0) {
3844 snr_master
= 10*intlog10(snr_master
>>16);
3845 *snr
= snr_master
/ ((1 << 24) / 10);
3853 struct per_layer_regs
{
3857 static const struct per_layer_regs per_layer_regs
[] = {
3863 struct linear_segments
{
3869 * Table to estimate signal strength in dBm.
3870 * This table was empirically determinated by measuring the signal
3871 * strength generated by a DTA-2111 RF generator directly connected into
3872 * a dib8076 device (a PixelView PV-D231U stick), using a good quality
3873 * 3 meters RC6 cable and good RC6 connectors.
3874 * The real value can actually be different on other devices, depending
3875 * on several factors, like if LNA is enabled or not, if diversity is
3876 * enabled, type of connectors, etc.
3877 * Yet, it is better to use this measure in dB than a random non-linear
3878 * percentage value, especially for antenna adjustments.
3879 * On my tests, the precision of the measure using this table is about
3880 * 0.5 dB, with sounds reasonable enough.
3882 static struct linear_segments strength_to_db_table
[] = {
3883 { 55953, 108500 }, /* -22.5 dBm */
3896 { 50117, 96000 }, /* -35 dBm */
3912 { 42010, 80000 }, /* -51 dBm */
3916 static u32
interpolate_value(u32 value
, struct linear_segments
*segments
,
3924 if (value
>= segments
[0].x
)
3925 return segments
[0].y
;
3926 if (value
< segments
[len
-1].x
)
3927 return segments
[len
-1].y
;
3929 for (i
= 1; i
< len
- 1; i
++) {
3930 /* If value is identical, no need to interpolate */
3931 if (value
== segments
[i
].x
)
3932 return segments
[i
].y
;
3933 if (value
> segments
[i
].x
)
3937 /* Linear interpolation between the two (x,y) points */
3938 dy
= segments
[i
- 1].y
- segments
[i
].y
;
3939 dx
= segments
[i
- 1].x
- segments
[i
].x
;
3941 tmp64
= value
- segments
[i
].x
;
3944 ret
= segments
[i
].y
+ tmp64
;
3949 static u32
dib8000_get_time_us(struct dvb_frontend
*fe
, int layer
)
3951 struct dib8000_state
*state
= fe
->demodulator_priv
;
3952 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
3953 int ini_layer
, end_layer
, i
;
3956 int guard
, rate_num
, rate_denum
= 1, bits_per_symbol
, nsegs
;
3957 int interleaving
= 0, fft_div
;
3961 end_layer
= layer
+ 1;
3967 switch (c
->guard_interval
) {
3968 case GUARD_INTERVAL_1_4
:
3971 case GUARD_INTERVAL_1_8
:
3974 case GUARD_INTERVAL_1_16
:
3978 case GUARD_INTERVAL_1_32
:
3983 switch (c
->transmission_mode
) {
3984 case TRANSMISSION_MODE_2K
:
3987 case TRANSMISSION_MODE_4K
:
3991 case TRANSMISSION_MODE_8K
:
3997 for (i
= ini_layer
; i
< end_layer
; i
++) {
3998 nsegs
= c
->layer
[i
].segment_count
;
3999 if (nsegs
== 0 || nsegs
> 13)
4002 switch (c
->layer
[i
].modulation
) {
4005 bits_per_symbol
= 2;
4008 bits_per_symbol
= 4;
4012 bits_per_symbol
= 6;
4016 switch (c
->layer
[i
].fec
) {
4040 interleaving
= c
->layer
[i
].interleaving
;
4042 denom
+= bits_per_symbol
* rate_num
* fft_div
* nsegs
* 384;
4045 /* If all goes wrong, wait for 1s for the next stats */
4049 /* Estimate the period for the total bit rate */
4050 time_us
= rate_denum
* (1008 * 1562500L);
4052 do_div(tmp64
, guard
);
4053 time_us
= time_us
+ tmp64
;
4054 time_us
+= denom
/ 2;
4055 do_div(time_us
, denom
);
4057 tmp
= 1008 * 96 * interleaving
;
4058 time_us
+= tmp
+ tmp
/ guard
;
4063 static int dib8000_get_stats(struct dvb_frontend
*fe
, fe_status_t stat
)
4065 struct dib8000_state
*state
= fe
->demodulator_priv
;
4066 struct dtv_frontend_properties
*c
= &state
->fe
[0]->dtv_property_cache
;
4068 int show_per_stats
= 0;
4069 u32 time_us
= 0, snr
, val
;
4074 /* Get Signal strength */
4075 dib8000_read_signal_strength(fe
, &strength
);
4077 db
= interpolate_value(val
,
4078 strength_to_db_table
,
4079 ARRAY_SIZE(strength_to_db_table
)) - 131000;
4080 c
->strength
.stat
[0].svalue
= db
;
4082 /* UCB/BER/CNR measures require lock */
4083 if (!(stat
& FE_HAS_LOCK
)) {
4085 c
->block_count
.len
= 1;
4086 c
->block_error
.len
= 1;
4087 c
->post_bit_error
.len
= 1;
4088 c
->post_bit_count
.len
= 1;
4089 c
->cnr
.stat
[0].scale
= FE_SCALE_NOT_AVAILABLE
;
4090 c
->post_bit_error
.stat
[0].scale
= FE_SCALE_NOT_AVAILABLE
;
4091 c
->post_bit_count
.stat
[0].scale
= FE_SCALE_NOT_AVAILABLE
;
4092 c
->block_error
.stat
[0].scale
= FE_SCALE_NOT_AVAILABLE
;
4093 c
->block_count
.stat
[0].scale
= FE_SCALE_NOT_AVAILABLE
;
4097 /* Check if time for stats was elapsed */
4098 if (time_after(jiffies
, state
->per_jiffies_stats
)) {
4099 state
->per_jiffies_stats
= jiffies
+ msecs_to_jiffies(1000);
4102 snr
= dib8000_get_snr(fe
);
4103 for (i
= 1; i
< MAX_NUMBER_OF_FRONTENDS
; i
++) {
4105 snr
+= dib8000_get_snr(state
->fe
[i
]);
4110 snr
= 10 * intlog10(snr
);
4111 snr
= (1000L * snr
) >> 24;
4115 c
->cnr
.stat
[0].svalue
= snr
;
4116 c
->cnr
.stat
[0].scale
= FE_SCALE_DECIBEL
;
4118 /* Get UCB measures */
4119 dib8000_read_unc_blocks(fe
, &val
);
4120 if (val
< state
->init_ucb
)
4121 state
->init_ucb
+= 0x100000000LL
;
4123 c
->block_error
.stat
[0].scale
= FE_SCALE_COUNTER
;
4124 c
->block_error
.stat
[0].uvalue
= val
+ state
->init_ucb
;
4126 /* Estimate the number of packets based on bitrate */
4128 time_us
= dib8000_get_time_us(fe
, -1);
4131 blocks
= 1250000ULL * 1000000ULL;
4132 do_div(blocks
, time_us
* 8 * 204);
4133 c
->block_count
.stat
[0].scale
= FE_SCALE_COUNTER
;
4134 c
->block_count
.stat
[0].uvalue
+= blocks
;
4140 /* Get post-BER measures */
4141 if (time_after(jiffies
, state
->ber_jiffies_stats
)) {
4142 time_us
= dib8000_get_time_us(fe
, -1);
4143 state
->ber_jiffies_stats
= jiffies
+ msecs_to_jiffies((time_us
+ 500) / 1000);
4145 dprintk("Next all layers stats available in %u us.", time_us
);
4147 dib8000_read_ber(fe
, &val
);
4148 c
->post_bit_error
.stat
[0].scale
= FE_SCALE_COUNTER
;
4149 c
->post_bit_error
.stat
[0].uvalue
+= val
;
4151 c
->post_bit_count
.stat
[0].scale
= FE_SCALE_COUNTER
;
4152 c
->post_bit_count
.stat
[0].uvalue
+= 100000000;
4155 if (state
->revision
< 0x8002)
4158 c
->block_error
.len
= 4;
4159 c
->post_bit_error
.len
= 4;
4160 c
->post_bit_count
.len
= 4;
4162 for (i
= 0; i
< 3; i
++) {
4163 unsigned nsegs
= c
->layer
[i
].segment_count
;
4165 if (nsegs
== 0 || nsegs
> 13)
4170 if (time_after(jiffies
, state
->ber_jiffies_stats_layer
[i
])) {
4171 time_us
= dib8000_get_time_us(fe
, i
);
4173 state
->ber_jiffies_stats_layer
[i
] = jiffies
+ msecs_to_jiffies((time_us
+ 500) / 1000);
4174 dprintk("Next layer %c stats will be available in %u us\n",
4177 val
= dib8000_read_word(state
, per_layer_regs
[i
].ber
);
4178 c
->post_bit_error
.stat
[1 + i
].scale
= FE_SCALE_COUNTER
;
4179 c
->post_bit_error
.stat
[1 + i
].uvalue
+= val
;
4181 c
->post_bit_count
.stat
[1 + i
].scale
= FE_SCALE_COUNTER
;
4182 c
->post_bit_count
.stat
[1 + i
].uvalue
+= 100000000;
4185 if (show_per_stats
) {
4186 val
= dib8000_read_word(state
, per_layer_regs
[i
].per
);
4188 c
->block_error
.stat
[1 + i
].scale
= FE_SCALE_COUNTER
;
4189 c
->block_error
.stat
[1 + i
].uvalue
+= val
;
4192 time_us
= dib8000_get_time_us(fe
, i
);
4194 blocks
= 1250000ULL * 1000000ULL;
4195 do_div(blocks
, time_us
* 8 * 204);
4196 c
->block_count
.stat
[0].scale
= FE_SCALE_COUNTER
;
4197 c
->block_count
.stat
[0].uvalue
+= blocks
;
4204 int dib8000_set_slave_frontend(struct dvb_frontend
*fe
, struct dvb_frontend
*fe_slave
)
4206 struct dib8000_state
*state
= fe
->demodulator_priv
;
4207 u8 index_frontend
= 1;
4209 while ((index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
))
4211 if (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) {
4212 dprintk("set slave fe %p to index %i", fe_slave
, index_frontend
);
4213 state
->fe
[index_frontend
] = fe_slave
;
4217 dprintk("too many slave frontend");
4220 EXPORT_SYMBOL(dib8000_set_slave_frontend
);
4222 int dib8000_remove_slave_frontend(struct dvb_frontend
*fe
)
4224 struct dib8000_state
*state
= fe
->demodulator_priv
;
4225 u8 index_frontend
= 1;
4227 while ((index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (state
->fe
[index_frontend
] != NULL
))
4229 if (index_frontend
!= 1) {
4230 dprintk("remove slave fe %p (index %i)", state
->fe
[index_frontend
-1], index_frontend
-1);
4231 state
->fe
[index_frontend
] = NULL
;
4235 dprintk("no frontend to be removed");
4238 EXPORT_SYMBOL(dib8000_remove_slave_frontend
);
4240 struct dvb_frontend
*dib8000_get_slave_frontend(struct dvb_frontend
*fe
, int slave_index
)
4242 struct dib8000_state
*state
= fe
->demodulator_priv
;
4244 if (slave_index
>= MAX_NUMBER_OF_FRONTENDS
)
4246 return state
->fe
[slave_index
];
4248 EXPORT_SYMBOL(dib8000_get_slave_frontend
);
4251 int dib8000_i2c_enumeration(struct i2c_adapter
*host
, int no_of_demods
,
4252 u8 default_addr
, u8 first_addr
, u8 is_dib8096p
)
4256 struct i2c_device client
= {.adap
= host
};
4258 client
.i2c_write_buffer
= kzalloc(4 * sizeof(u8
), GFP_KERNEL
);
4259 if (!client
.i2c_write_buffer
) {
4260 dprintk("%s: not enough memory", __func__
);
4263 client
.i2c_read_buffer
= kzalloc(4 * sizeof(u8
), GFP_KERNEL
);
4264 if (!client
.i2c_read_buffer
) {
4265 dprintk("%s: not enough memory", __func__
);
4267 goto error_memory_read
;
4269 client
.i2c_buffer_lock
= kzalloc(sizeof(struct mutex
), GFP_KERNEL
);
4270 if (!client
.i2c_buffer_lock
) {
4271 dprintk("%s: not enough memory", __func__
);
4273 goto error_memory_lock
;
4275 mutex_init(client
.i2c_buffer_lock
);
4277 for (k
= no_of_demods
- 1; k
>= 0; k
--) {
4278 /* designated i2c address */
4279 new_addr
= first_addr
+ (k
<< 1);
4281 client
.addr
= new_addr
;
4283 dib8000_i2c_write16(&client
, 1287, 0x0003); /* sram lead in, rdy */
4284 if (dib8000_identify(&client
) == 0) {
4285 /* sram lead in, rdy */
4287 dib8000_i2c_write16(&client
, 1287, 0x0003);
4288 client
.addr
= default_addr
;
4289 if (dib8000_identify(&client
) == 0) {
4290 dprintk("#%d: not identified", k
);
4296 /* start diversity to pull_down div_str - just for i2c-enumeration */
4297 dib8000_i2c_write16(&client
, 1286, (1 << 10) | (4 << 6));
4299 /* set new i2c address and force divstart */
4300 dib8000_i2c_write16(&client
, 1285, (new_addr
<< 2) | 0x2);
4301 client
.addr
= new_addr
;
4302 dib8000_identify(&client
);
4304 dprintk("IC %d initialized (to i2c_address 0x%x)", k
, new_addr
);
4307 for (k
= 0; k
< no_of_demods
; k
++) {
4308 new_addr
= first_addr
| (k
<< 1);
4309 client
.addr
= new_addr
;
4312 dib8000_i2c_write16(&client
, 1285, new_addr
<< 2);
4314 /* deactivate div - it was just for i2c-enumeration */
4315 dib8000_i2c_write16(&client
, 1286, 0);
4319 kfree(client
.i2c_buffer_lock
);
4321 kfree(client
.i2c_read_buffer
);
4323 kfree(client
.i2c_write_buffer
);
4328 EXPORT_SYMBOL(dib8000_i2c_enumeration
);
4329 static int dib8000_fe_get_tune_settings(struct dvb_frontend
*fe
, struct dvb_frontend_tune_settings
*tune
)
4331 tune
->min_delay_ms
= 1000;
4332 tune
->step_size
= 0;
4333 tune
->max_drift
= 0;
4337 static void dib8000_release(struct dvb_frontend
*fe
)
4339 struct dib8000_state
*st
= fe
->demodulator_priv
;
4342 for (index_frontend
= 1; (index_frontend
< MAX_NUMBER_OF_FRONTENDS
) && (st
->fe
[index_frontend
] != NULL
); index_frontend
++)
4343 dvb_frontend_detach(st
->fe
[index_frontend
]);
4345 dibx000_exit_i2c_master(&st
->i2c_master
);
4346 i2c_del_adapter(&st
->dib8096p_tuner_adap
);
4351 struct i2c_adapter
*dib8000_get_i2c_master(struct dvb_frontend
*fe
, enum dibx000_i2c_interface intf
, int gating
)
4353 struct dib8000_state
*st
= fe
->demodulator_priv
;
4354 return dibx000_get_i2c_adapter(&st
->i2c_master
, intf
, gating
);
4357 EXPORT_SYMBOL(dib8000_get_i2c_master
);
4359 int dib8000_pid_filter_ctrl(struct dvb_frontend
*fe
, u8 onoff
)
4361 struct dib8000_state
*st
= fe
->demodulator_priv
;
4362 u16 val
= dib8000_read_word(st
, 299) & 0xffef;
4363 val
|= (onoff
& 0x1) << 4;
4365 dprintk("pid filter enabled %d", onoff
);
4366 return dib8000_write_word(st
, 299, val
);
4368 EXPORT_SYMBOL(dib8000_pid_filter_ctrl
);
4370 int dib8000_pid_filter(struct dvb_frontend
*fe
, u8 id
, u16 pid
, u8 onoff
)
4372 struct dib8000_state
*st
= fe
->demodulator_priv
;
4373 dprintk("Index %x, PID %d, OnOff %d", id
, pid
, onoff
);
4374 return dib8000_write_word(st
, 305 + id
, onoff
? (1 << 13) | pid
: 0);
4376 EXPORT_SYMBOL(dib8000_pid_filter
);
4378 static const struct dvb_frontend_ops dib8000_ops
= {
4379 .delsys
= { SYS_ISDBT
},
4381 .name
= "DiBcom 8000 ISDB-T",
4382 .frequency_min
= 44250000,
4383 .frequency_max
= 867250000,
4384 .frequency_stepsize
= 62500,
4385 .caps
= FE_CAN_INVERSION_AUTO
|
4386 FE_CAN_FEC_1_2
| FE_CAN_FEC_2_3
| FE_CAN_FEC_3_4
|
4387 FE_CAN_FEC_5_6
| FE_CAN_FEC_7_8
| FE_CAN_FEC_AUTO
|
4388 FE_CAN_QPSK
| FE_CAN_QAM_16
| FE_CAN_QAM_64
| FE_CAN_QAM_AUTO
|
4389 FE_CAN_TRANSMISSION_MODE_AUTO
| FE_CAN_GUARD_INTERVAL_AUTO
| FE_CAN_RECOVER
| FE_CAN_HIERARCHY_AUTO
,
4392 .release
= dib8000_release
,
4394 .init
= dib8000_wakeup
,
4395 .sleep
= dib8000_sleep
,
4397 .set_frontend
= dib8000_set_frontend
,
4398 .get_tune_settings
= dib8000_fe_get_tune_settings
,
4399 .get_frontend
= dib8000_get_frontend
,
4401 .read_status
= dib8000_read_status
,
4402 .read_ber
= dib8000_read_ber
,
4403 .read_signal_strength
= dib8000_read_signal_strength
,
4404 .read_snr
= dib8000_read_snr
,
4405 .read_ucblocks
= dib8000_read_unc_blocks
,
4408 struct dvb_frontend
*dib8000_attach(struct i2c_adapter
*i2c_adap
, u8 i2c_addr
, struct dib8000_config
*cfg
)
4410 struct dvb_frontend
*fe
;
4411 struct dib8000_state
*state
;
4413 dprintk("dib8000_attach");
4415 state
= kzalloc(sizeof(struct dib8000_state
), GFP_KERNEL
);
4418 fe
= kzalloc(sizeof(struct dvb_frontend
), GFP_KERNEL
);
4422 memcpy(&state
->cfg
, cfg
, sizeof(struct dib8000_config
));
4423 state
->i2c
.adap
= i2c_adap
;
4424 state
->i2c
.addr
= i2c_addr
;
4425 state
->i2c
.i2c_write_buffer
= state
->i2c_write_buffer
;
4426 state
->i2c
.i2c_read_buffer
= state
->i2c_read_buffer
;
4427 mutex_init(&state
->i2c_buffer_lock
);
4428 state
->i2c
.i2c_buffer_lock
= &state
->i2c_buffer_lock
;
4429 state
->gpio_val
= cfg
->gpio_val
;
4430 state
->gpio_dir
= cfg
->gpio_dir
;
4432 /* Ensure the output mode remains at the previous default if it's
4433 * not specifically set by the caller.
4435 if ((state
->cfg
.output_mode
!= OUTMODE_MPEG2_SERIAL
) && (state
->cfg
.output_mode
!= OUTMODE_MPEG2_PAR_GATED_CLK
))
4436 state
->cfg
.output_mode
= OUTMODE_MPEG2_FIFO
;
4439 fe
->demodulator_priv
= state
;
4440 memcpy(&state
->fe
[0]->ops
, &dib8000_ops
, sizeof(struct dvb_frontend_ops
));
4442 state
->timf_default
= cfg
->pll
->timf
;
4444 if (dib8000_identify(&state
->i2c
) == 0)
4447 dibx000_init_i2c_master(&state
->i2c_master
, DIB8000
, state
->i2c
.adap
, state
->i2c
.addr
);
4449 /* init 8096p tuner adapter */
4450 strncpy(state
->dib8096p_tuner_adap
.name
, "DiB8096P tuner interface",
4451 sizeof(state
->dib8096p_tuner_adap
.name
));
4452 state
->dib8096p_tuner_adap
.algo
= &dib8096p_tuner_xfer_algo
;
4453 state
->dib8096p_tuner_adap
.algo_data
= NULL
;
4454 state
->dib8096p_tuner_adap
.dev
.parent
= state
->i2c
.adap
->dev
.parent
;
4455 i2c_set_adapdata(&state
->dib8096p_tuner_adap
, state
);
4456 i2c_add_adapter(&state
->dib8096p_tuner_adap
);
4460 dib8000_write_word(state
, 285, (dib8000_read_word(state
, 285) & ~0x60) | (3 << 5)); /* ber_rs_len = 3 */
4461 state
->current_demod_bw
= 6000;
4470 EXPORT_SYMBOL(dib8000_attach
);
4472 MODULE_AUTHOR("Olivier Grenie <Olivier.Grenie@dibcom.fr, " "Patrick Boettcher <pboettcher@dibcom.fr>");
4473 MODULE_DESCRIPTION("Driver for the DiBcom 8000 ISDB-T demodulator");
4474 MODULE_LICENSE("GPL");