drivers/gpu/drm/vc4/vc4_plane.c

   1 /*
   2  * Copyright (C) 2015 Broadcom
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /**
  10  * DOC: VC4 plane module
  11  *
  12  * Each DRM plane is a layer of pixels being scanned out by the HVS.
  13  *
  14  * At atomic modeset check time, we compute the HVS display element
  15  * state that would be necessary for displaying the plane (giving us a
  16  * chance to figure out if a plane configuration is invalid), then at
  17  * atomic flush time the CRTC will ask us to write our element state
  18  * into the region of the HVS that it has allocated for us.
  19  */
  20
  21 #include <drm/drm_atomic.h>
  22 #include <drm/drm_atomic_helper.h>
  23 #include <drm/drm_fb_cma_helper.h>
  24 #include <drm/drm_plane_helper.h>
  25
  26 #include "vc4_drv.h"
  27 #include "vc4_regs.h"
  28
  29 enum vc4_scaling_mode {
  30         VC4_SCALING_NONE,
  31         VC4_SCALING_TPZ,
  32         VC4_SCALING_PPF,
  33 };
  34
  35 struct vc4_plane_state {
  36         struct drm_plane_state base;
  37         /* System memory copy of the display list for this element, computed
  38          * at atomic_check time.
  39          */
  40         u32 *dlist;
  41         u32 dlist_size; /* Number of dwords allocated for the display list */
  42         u32 dlist_count; /* Number of used dwords in the display list. */
  43
  44         /* Offset in the dlist to various words, for pageflip or
  45          * cursor updates.
  46          */
  47         u32 pos0_offset;
  48         u32 pos2_offset;
  49         u32 ptr0_offset;
  50
  51         /* Offset where the plane's dlist was last stored in the
  52          * hardware at vc4_crtc_atomic_flush() time.
  53          */
  54         u32 __iomem *hw_dlist;
  55
  56         /* Clipped coordinates of the plane on the display. */
  57         int crtc_x, crtc_y, crtc_w, crtc_h;
  58         /* Clipped area being scanned from in the FB. */
  59         u32 src_x, src_y;
  60
  61         u32 src_w[2], src_h[2];
  62
  63         /* Scaling selection for the RGB/Y plane and the Cb/Cr planes. */
  64         enum vc4_scaling_mode x_scaling[2], y_scaling[2];
  65         bool is_unity;
  66         bool is_yuv;
  67
  68         /* Offset to start scanning out from the start of the plane's
  69          * BO.
  70          */
  71         u32 offsets[3];
  72
  73         /* Our allocation in LBM for temporary storage during scaling. */
  74         struct drm_mm_node lbm;
  75 };
  76
  77 static inline struct vc4_plane_state *
  78 to_vc4_plane_state(struct drm_plane_state *state)
  79 {
  80         return (struct vc4_plane_state *)state;
  81 }
  82
  83 static const struct hvs_format {
  84         u32 drm; /* DRM_FORMAT_* */
  85         u32 hvs; /* HVS_FORMAT_* */
  86         u32 pixel_order;
  87         bool has_alpha;
  88         bool flip_cbcr;
  89 } hvs_formats[] = {
  90         {
  91                 .drm = DRM_FORMAT_XRGB8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
  92                 .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = false,
  93         },
  94         {
  95                 .drm = DRM_FORMAT_ARGB8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
  96                 .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = true,
  97         },
  98         {
  99                 .drm = DRM_FORMAT_ABGR8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
 100                 .pixel_order = HVS_PIXEL_ORDER_ARGB, .has_alpha = true,
 101         },
 102         {
 103                 .drm = DRM_FORMAT_XBGR8888, .hvs = HVS_PIXEL_FORMAT_RGBA8888,
 104                 .pixel_order = HVS_PIXEL_ORDER_ARGB, .has_alpha = false,
 105         },
 106         {
 107                 .drm = DRM_FORMAT_RGB565, .hvs = HVS_PIXEL_FORMAT_RGB565,
 108                 .pixel_order = HVS_PIXEL_ORDER_XRGB, .has_alpha = false,
 109         },
 110         {
 111                 .drm = DRM_FORMAT_BGR565, .hvs = HVS_PIXEL_FORMAT_RGB565,
 112                 .pixel_order = HVS_PIXEL_ORDER_XBGR, .has_alpha = false,
 113         },
 114         {
 115                 .drm = DRM_FORMAT_ARGB1555, .hvs = HVS_PIXEL_FORMAT_RGBA5551,
 116                 .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = true,
 117         },
 118         {
 119                 .drm = DRM_FORMAT_XRGB1555, .hvs = HVS_PIXEL_FORMAT_RGBA5551,
 120                 .pixel_order = HVS_PIXEL_ORDER_ABGR, .has_alpha = false,
 121         },
 122         {
 123                 .drm = DRM_FORMAT_YUV422,
 124                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE,
 125         },
 126         {
 127                 .drm = DRM_FORMAT_YVU422,
 128                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE,
 129                 .flip_cbcr = true,
 130         },
 131         {
 132                 .drm = DRM_FORMAT_YUV420,
 133                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE,
 134         },
 135         {
 136                 .drm = DRM_FORMAT_YVU420,
 137                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE,
 138                 .flip_cbcr = true,
 139         },
 140         {
 141                 .drm = DRM_FORMAT_NV12,
 142                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV420_2PLANE,
 143         },
 144         {
 145                 .drm = DRM_FORMAT_NV16,
 146                 .hvs = HVS_PIXEL_FORMAT_YCBCR_YUV422_2PLANE,
 147         },
 148 };
 149
 150 static const struct hvs_format *vc4_get_hvs_format(u32 drm_format)
 151 {
 152         unsigned i;
 153
 154         for (i = 0; i < ARRAY_SIZE(hvs_formats); i++) {
 155                 if (hvs_formats[i].drm == drm_format)
 156                         return &hvs_formats[i];
 157         }
 158
 159         return NULL;
 160 }
 161
 162 static enum vc4_scaling_mode vc4_get_scaling_mode(u32 src, u32 dst)
 163 {
 164         if (dst > src)
 165                 return VC4_SCALING_PPF;
 166         else if (dst < src)
 167                 return VC4_SCALING_TPZ;
 168         else
 169                 return VC4_SCALING_NONE;
 170 }
 171
 172 static bool plane_enabled(struct drm_plane_state *state)
 173 {
 174         return state->fb && state->crtc;
 175 }
 176
 177 static struct drm_plane_state *vc4_plane_duplicate_state(struct drm_plane *plane)
 178 {
 179         struct vc4_plane_state *vc4_state;
 180
 181         if (WARN_ON(!plane->state))
 182                 return NULL;
 183
 184         vc4_state = kmemdup(plane->state, sizeof(*vc4_state), GFP_KERNEL);
 185         if (!vc4_state)
 186                 return NULL;
 187
 188         memset(&vc4_state->lbm, 0, sizeof(vc4_state->lbm));
 189
 190         __drm_atomic_helper_plane_duplicate_state(plane, &vc4_state->base);
 191
 192         if (vc4_state->dlist) {
 193                 vc4_state->dlist = kmemdup(vc4_state->dlist,
 194                                            vc4_state->dlist_count * 4,
 195                                            GFP_KERNEL);
 196                 if (!vc4_state->dlist) {
 197                         kfree(vc4_state);
 198                         return NULL;
 199                 }
 200                 vc4_state->dlist_size = vc4_state->dlist_count;
 201         }
 202
 203         return &vc4_state->base;
 204 }
 205
 206 static void vc4_plane_destroy_state(struct drm_plane *plane,
 207                                     struct drm_plane_state *state)
 208 {
 209         struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
 210         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 211
 212         if (vc4_state->lbm.allocated) {
 213                 unsigned long irqflags;
 214
 215                 spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
 216                 drm_mm_remove_node(&vc4_state->lbm);
 217                 spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
 218         }
 219
 220         kfree(vc4_state->dlist);
 221         __drm_atomic_helper_plane_destroy_state(&vc4_state->base);
 222         kfree(state);
 223 }
 224
 225 /* Called during init to allocate the plane's atomic state. */
 226 static void vc4_plane_reset(struct drm_plane *plane)
 227 {
 228         struct vc4_plane_state *vc4_state;
 229
 230         WARN_ON(plane->state);
 231
 232         vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL);
 233         if (!vc4_state)
 234                 return;
 235
 236         plane->state = &vc4_state->base;
 237         vc4_state->base.plane = plane;
 238 }
 239
 240 static void vc4_dlist_write(struct vc4_plane_state *vc4_state, u32 val)
 241 {
 242         if (vc4_state->dlist_count == vc4_state->dlist_size) {
 243                 u32 new_size = max(4u, vc4_state->dlist_count * 2);
 244                 u32 *new_dlist = kmalloc(new_size * 4, GFP_KERNEL);
 245
 246                 if (!new_dlist)
 247                         return;
 248                 memcpy(new_dlist, vc4_state->dlist, vc4_state->dlist_count * 4);
 249
 250                 kfree(vc4_state->dlist);
 251                 vc4_state->dlist = new_dlist;
 252                 vc4_state->dlist_size = new_size;
 253         }
 254
 255         vc4_state->dlist[vc4_state->dlist_count++] = val;
 256 }
 257
 258 /* Returns the scl0/scl1 field based on whether the dimensions need to
 259  * be up/down/non-scaled.
 260  *
 261  * This is a replication of a table from the spec.
 262  */
 263 static u32 vc4_get_scl_field(struct drm_plane_state *state, int plane)
 264 {
 265         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 266
 267         switch (vc4_state->x_scaling[plane] << 2 | vc4_state->y_scaling[plane]) {
 268         case VC4_SCALING_PPF << 2 | VC4_SCALING_PPF:
 269                 return SCALER_CTL0_SCL_H_PPF_V_PPF;
 270         case VC4_SCALING_TPZ << 2 | VC4_SCALING_PPF:
 271                 return SCALER_CTL0_SCL_H_TPZ_V_PPF;
 272         case VC4_SCALING_PPF << 2 | VC4_SCALING_TPZ:
 273                 return SCALER_CTL0_SCL_H_PPF_V_TPZ;
 274         case VC4_SCALING_TPZ << 2 | VC4_SCALING_TPZ:
 275                 return SCALER_CTL0_SCL_H_TPZ_V_TPZ;
 276         case VC4_SCALING_PPF << 2 | VC4_SCALING_NONE:
 277                 return SCALER_CTL0_SCL_H_PPF_V_NONE;
 278         case VC4_SCALING_NONE << 2 | VC4_SCALING_PPF:
 279                 return SCALER_CTL0_SCL_H_NONE_V_PPF;
 280         case VC4_SCALING_NONE << 2 | VC4_SCALING_TPZ:
 281                 return SCALER_CTL0_SCL_H_NONE_V_TPZ;
 282         case VC4_SCALING_TPZ << 2 | VC4_SCALING_NONE:
 283                 return SCALER_CTL0_SCL_H_TPZ_V_NONE;
 284         default:
 285         case VC4_SCALING_NONE << 2 | VC4_SCALING_NONE:
 286                 /* The unity case is independently handled by
 287                  * SCALER_CTL0_UNITY.
 288                  */
 289                 return 0;
 290         }
 291 }
 292
 293 static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state)
 294 {
 295         struct drm_plane *plane = state->plane;
 296         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 297         struct drm_framebuffer *fb = state->fb;
 298         struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
 299         u32 subpixel_src_mask = (1 << 16) - 1;
 300         u32 format = fb->format->format;
 301         int num_planes = fb->format->num_planes;
 302         u32 h_subsample = 1;
 303         u32 v_subsample = 1;
 304         int i;
 305
 306         for (i = 0; i < num_planes; i++)
 307                 vc4_state->offsets[i] = bo->paddr + fb->offsets[i];
 308
 309         /* We don't support subpixel source positioning for scaling. */
 310         if ((state->src_x & subpixel_src_mask) ||
 311             (state->src_y & subpixel_src_mask) ||
 312             (state->src_w & subpixel_src_mask) ||
 313             (state->src_h & subpixel_src_mask)) {
 314                 return -EINVAL;
 315         }
 316
 317         vc4_state->src_x = state->src_x >> 16;
 318         vc4_state->src_y = state->src_y >> 16;
 319         vc4_state->src_w[0] = state->src_w >> 16;
 320         vc4_state->src_h[0] = state->src_h >> 16;
 321
 322         vc4_state->crtc_x = state->crtc_x;
 323         vc4_state->crtc_y = state->crtc_y;
 324         vc4_state->crtc_w = state->crtc_w;
 325         vc4_state->crtc_h = state->crtc_h;
 326
 327         vc4_state->x_scaling[0] = vc4_get_scaling_mode(vc4_state->src_w[0],
 328                                                        vc4_state->crtc_w);
 329         vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0],
 330                                                        vc4_state->crtc_h);
 331
 332         if (num_planes > 1) {
 333                 vc4_state->is_yuv = true;
 334
 335                 h_subsample = drm_format_horz_chroma_subsampling(format);
 336                 v_subsample = drm_format_vert_chroma_subsampling(format);
 337                 vc4_state->src_w[1] = vc4_state->src_w[0] / h_subsample;
 338                 vc4_state->src_h[1] = vc4_state->src_h[0] / v_subsample;
 339
 340                 vc4_state->x_scaling[1] =
 341                         vc4_get_scaling_mode(vc4_state->src_w[1],
 342                                              vc4_state->crtc_w);
 343                 vc4_state->y_scaling[1] =
 344                         vc4_get_scaling_mode(vc4_state->src_h[1],
 345                                              vc4_state->crtc_h);
 346
 347                 /* YUV conversion requires that scaling be enabled,
 348                  * even on a plane that's otherwise 1:1.  Choose TPZ
 349                  * for simplicity.
 350                  */
 351                 if (vc4_state->x_scaling[0] == VC4_SCALING_NONE)
 352                         vc4_state->x_scaling[0] = VC4_SCALING_TPZ;
 353                 if (vc4_state->y_scaling[0] == VC4_SCALING_NONE)
 354                         vc4_state->y_scaling[0] = VC4_SCALING_TPZ;
 355         }
 356
 357         vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE &&
 358                                vc4_state->y_scaling[0] == VC4_SCALING_NONE &&
 359                                vc4_state->x_scaling[1] == VC4_SCALING_NONE &&
 360                                vc4_state->y_scaling[1] == VC4_SCALING_NONE);
 361
 362         /* No configuring scaling on the cursor plane, since it gets
 363            non-vblank-synced updates, and scaling requires requires
 364            LBM changes which have to be vblank-synced.
 365          */
 366         if (plane->type == DRM_PLANE_TYPE_CURSOR && !vc4_state->is_unity)
 367                 return -EINVAL;
 368
 369         /* Clamp the on-screen start x/y to 0.  The hardware doesn't
 370          * support negative y, and negative x wastes bandwidth.
 371          */
 372         if (vc4_state->crtc_x < 0) {
 373                 for (i = 0; i < num_planes; i++) {
 374                         u32 cpp = fb->format->cpp[i];
 375                         u32 subs = ((i == 0) ? 1 : h_subsample);
 376
 377                         vc4_state->offsets[i] += (cpp *
 378                                                   (-vc4_state->crtc_x) / subs);
 379                 }
 380                 vc4_state->src_w[0] += vc4_state->crtc_x;
 381                 vc4_state->src_w[1] += vc4_state->crtc_x / h_subsample;
 382                 vc4_state->crtc_x = 0;
 383         }
 384
 385         if (vc4_state->crtc_y < 0) {
 386                 for (i = 0; i < num_planes; i++) {
 387                         u32 subs = ((i == 0) ? 1 : v_subsample);
 388
 389                         vc4_state->offsets[i] += (fb->pitches[i] *
 390                                                   (-vc4_state->crtc_y) / subs);
 391                 }
 392                 vc4_state->src_h[0] += vc4_state->crtc_y;
 393                 vc4_state->src_h[1] += vc4_state->crtc_y / v_subsample;
 394                 vc4_state->crtc_y = 0;
 395         }
 396
 397         return 0;
 398 }
 399
 400 static void vc4_write_tpz(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
 401 {
 402         u32 scale, recip;
 403
 404         scale = (1 << 16) * src / dst;
 405
 406         /* The specs note that while the reciprocal would be defined
 407          * as (1<<32)/scale, ~0 is close enough.
 408          */
 409         recip = ~0 / scale;
 410
 411         vc4_dlist_write(vc4_state,
 412                         VC4_SET_FIELD(scale, SCALER_TPZ0_SCALE) |
 413                         VC4_SET_FIELD(0, SCALER_TPZ0_IPHASE));
 414         vc4_dlist_write(vc4_state,
 415                         VC4_SET_FIELD(recip, SCALER_TPZ1_RECIP));
 416 }
 417
 418 static void vc4_write_ppf(struct vc4_plane_state *vc4_state, u32 src, u32 dst)
 419 {
 420         u32 scale = (1 << 16) * src / dst;
 421
 422         vc4_dlist_write(vc4_state,
 423                         SCALER_PPF_AGC |
 424                         VC4_SET_FIELD(scale, SCALER_PPF_SCALE) |
 425                         VC4_SET_FIELD(0, SCALER_PPF_IPHASE));
 426 }
 427
 428 static u32 vc4_lbm_size(struct drm_plane_state *state)
 429 {
 430         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 431         /* This is the worst case number.  One of the two sizes will
 432          * be used depending on the scaling configuration.
 433          */
 434         u32 pix_per_line = max(vc4_state->src_w[0], (u32)vc4_state->crtc_w);
 435         u32 lbm;
 436
 437         if (!vc4_state->is_yuv) {
 438                 if (vc4_state->is_unity)
 439                         return 0;
 440                 else if (vc4_state->y_scaling[0] == VC4_SCALING_TPZ)
 441                         lbm = pix_per_line * 8;
 442                 else {
 443                         /* In special cases, this multiplier might be 12. */
 444                         lbm = pix_per_line * 16;
 445                 }
 446         } else {
 447                 /* There are cases for this going down to a multiplier
 448                  * of 2, but according to the firmware source, the
 449                  * table in the docs is somewhat wrong.
 450                  */
 451                 lbm = pix_per_line * 16;
 452         }
 453
 454         lbm = roundup(lbm, 32);
 455
 456         return lbm;
 457 }
 458
 459 static void vc4_write_scaling_parameters(struct drm_plane_state *state,
 460                                          int channel)
 461 {
 462         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 463
 464         /* Ch0 H-PPF Word 0: Scaling Parameters */
 465         if (vc4_state->x_scaling[channel] == VC4_SCALING_PPF) {
 466                 vc4_write_ppf(vc4_state,
 467                               vc4_state->src_w[channel], vc4_state->crtc_w);
 468         }
 469
 470         /* Ch0 V-PPF Words 0-1: Scaling Parameters, Context */
 471         if (vc4_state->y_scaling[channel] == VC4_SCALING_PPF) {
 472                 vc4_write_ppf(vc4_state,
 473                               vc4_state->src_h[channel], vc4_state->crtc_h);
 474                 vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 475         }
 476
 477         /* Ch0 H-TPZ Words 0-1: Scaling Parameters, Recip */
 478         if (vc4_state->x_scaling[channel] == VC4_SCALING_TPZ) {
 479                 vc4_write_tpz(vc4_state,
 480                               vc4_state->src_w[channel], vc4_state->crtc_w);
 481         }
 482
 483         /* Ch0 V-TPZ Words 0-2: Scaling Parameters, Recip, Context */
 484         if (vc4_state->y_scaling[channel] == VC4_SCALING_TPZ) {
 485                 vc4_write_tpz(vc4_state,
 486                               vc4_state->src_h[channel], vc4_state->crtc_h);
 487                 vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 488         }
 489 }
 490
 491 /* Writes out a full display list for an active plane to the plane's
 492  * private dlist state.
 493  */
 494 static int vc4_plane_mode_set(struct drm_plane *plane,
 495                               struct drm_plane_state *state)
 496 {
 497         struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
 498         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 499         struct drm_framebuffer *fb = state->fb;
 500         u32 ctl0_offset = vc4_state->dlist_count;
 501         const struct hvs_format *format = vc4_get_hvs_format(fb->format->format);
 502         int num_planes = drm_format_num_planes(format->drm);
 503         u32 scl0, scl1, pitch0;
 504         u32 lbm_size, tiling;
 505         unsigned long irqflags;
 506         int ret, i;
 507
 508         ret = vc4_plane_setup_clipping_and_scaling(state);
 509         if (ret)
 510                 return ret;
 511
 512         /* Allocate the LBM memory that the HVS will use for temporary
 513          * storage due to our scaling/format conversion.
 514          */
 515         lbm_size = vc4_lbm_size(state);
 516         if (lbm_size) {
 517                 if (!vc4_state->lbm.allocated) {
 518                         spin_lock_irqsave(&vc4->hvs->mm_lock, irqflags);
 519                         ret = drm_mm_insert_node_generic(&vc4->hvs->lbm_mm,
 520                                                          &vc4_state->lbm,
 521                                                          lbm_size, 32, 0, 0);
 522                         spin_unlock_irqrestore(&vc4->hvs->mm_lock, irqflags);
 523                 } else {
 524                         WARN_ON_ONCE(lbm_size != vc4_state->lbm.size);
 525                 }
 526         }
 527
 528         if (ret)
 529                 return ret;
 530
 531         /* SCL1 is used for Cb/Cr scaling of planar formats.  For RGB
 532          * and 4:4:4, scl1 should be set to scl0 so both channels of
 533          * the scaler do the same thing.  For YUV, the Y plane needs
 534          * to be put in channel 1 and Cb/Cr in channel 0, so we swap
 535          * the scl fields here.
 536          */
 537         if (num_planes == 1) {
 538                 scl0 = vc4_get_scl_field(state, 1);
 539                 scl1 = scl0;
 540         } else {
 541                 scl0 = vc4_get_scl_field(state, 1);
 542                 scl1 = vc4_get_scl_field(state, 0);
 543         }
 544
 545         switch (fb->modifier) {
 546         case DRM_FORMAT_MOD_LINEAR:
 547                 tiling = SCALER_CTL0_TILING_LINEAR;
 548                 pitch0 = VC4_SET_FIELD(fb->pitches[0], SCALER_SRC_PITCH);
 549                 break;
 550         case DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED:
 551                 tiling = SCALER_CTL0_TILING_256B_OR_T;
 552
 553                 pitch0 = (VC4_SET_FIELD(0, SCALER_PITCH0_TILE_Y_OFFSET),
 554                           VC4_SET_FIELD(0, SCALER_PITCH0_TILE_WIDTH_L),
 555                           VC4_SET_FIELD((vc4_state->src_w[0] + 31) >> 5,
 556                                         SCALER_PITCH0_TILE_WIDTH_R));
 557                 break;
 558         default:
 559                 DRM_DEBUG_KMS("Unsupported FB tiling flag 0x%16llx",
 560                               (long long)fb->modifier);
 561                 return -EINVAL;
 562         }
 563
 564         /* Control word */
 565         vc4_dlist_write(vc4_state,
 566                         SCALER_CTL0_VALID |
 567                         (format->pixel_order << SCALER_CTL0_ORDER_SHIFT) |
 568                         (format->hvs << SCALER_CTL0_PIXEL_FORMAT_SHIFT) |
 569                         VC4_SET_FIELD(tiling, SCALER_CTL0_TILING) |
 570                         (vc4_state->is_unity ? SCALER_CTL0_UNITY : 0) |
 571                         VC4_SET_FIELD(scl0, SCALER_CTL0_SCL0) |
 572                         VC4_SET_FIELD(scl1, SCALER_CTL0_SCL1));
 573
 574         /* Position Word 0: Image Positions and Alpha Value */
 575         vc4_state->pos0_offset = vc4_state->dlist_count;
 576         vc4_dlist_write(vc4_state,
 577                         VC4_SET_FIELD(0xff, SCALER_POS0_FIXED_ALPHA) |
 578                         VC4_SET_FIELD(vc4_state->crtc_x, SCALER_POS0_START_X) |
 579                         VC4_SET_FIELD(vc4_state->crtc_y, SCALER_POS0_START_Y));
 580
 581         /* Position Word 1: Scaled Image Dimensions. */
 582         if (!vc4_state->is_unity) {
 583                 vc4_dlist_write(vc4_state,
 584                                 VC4_SET_FIELD(vc4_state->crtc_w,
 585                                               SCALER_POS1_SCL_WIDTH) |
 586                                 VC4_SET_FIELD(vc4_state->crtc_h,
 587                                               SCALER_POS1_SCL_HEIGHT));
 588         }
 589
 590         /* Position Word 2: Source Image Size, Alpha Mode */
 591         vc4_state->pos2_offset = vc4_state->dlist_count;
 592         vc4_dlist_write(vc4_state,
 593                         VC4_SET_FIELD(format->has_alpha ?
 594                                       SCALER_POS2_ALPHA_MODE_PIPELINE :
 595                                       SCALER_POS2_ALPHA_MODE_FIXED,
 596                                       SCALER_POS2_ALPHA_MODE) |
 597                         VC4_SET_FIELD(vc4_state->src_w[0], SCALER_POS2_WIDTH) |
 598                         VC4_SET_FIELD(vc4_state->src_h[0], SCALER_POS2_HEIGHT));
 599
 600         /* Position Word 3: Context.  Written by the HVS. */
 601         vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 602
 603
 604         /* Pointer Word 0/1/2: RGB / Y / Cb / Cr Pointers
 605          *
 606          * The pointers may be any byte address.
 607          */
 608         vc4_state->ptr0_offset = vc4_state->dlist_count;
 609         if (!format->flip_cbcr) {
 610                 for (i = 0; i < num_planes; i++)
 611                         vc4_dlist_write(vc4_state, vc4_state->offsets[i]);
 612         } else {
 613                 WARN_ON_ONCE(num_planes != 3);
 614                 vc4_dlist_write(vc4_state, vc4_state->offsets[0]);
 615                 vc4_dlist_write(vc4_state, vc4_state->offsets[2]);
 616                 vc4_dlist_write(vc4_state, vc4_state->offsets[1]);
 617         }
 618
 619         /* Pointer Context Word 0/1/2: Written by the HVS */
 620         for (i = 0; i < num_planes; i++)
 621                 vc4_dlist_write(vc4_state, 0xc0c0c0c0);
 622
 623         /* Pitch word 0 */
 624         vc4_dlist_write(vc4_state, pitch0);
 625
 626         /* Pitch word 1/2 */
 627         for (i = 1; i < num_planes; i++) {
 628                 vc4_dlist_write(vc4_state,
 629                                 VC4_SET_FIELD(fb->pitches[i], SCALER_SRC_PITCH));
 630         }
 631
 632         /* Colorspace conversion words */
 633         if (vc4_state->is_yuv) {
 634                 vc4_dlist_write(vc4_state, SCALER_CSC0_ITR_R_601_5);
 635                 vc4_dlist_write(vc4_state, SCALER_CSC1_ITR_R_601_5);
 636                 vc4_dlist_write(vc4_state, SCALER_CSC2_ITR_R_601_5);
 637         }
 638
 639         if (!vc4_state->is_unity) {
 640                 /* LBM Base Address. */
 641                 if (vc4_state->y_scaling[0] != VC4_SCALING_NONE ||
 642                     vc4_state->y_scaling[1] != VC4_SCALING_NONE) {
 643                         vc4_dlist_write(vc4_state, vc4_state->lbm.start);
 644                 }
 645
 646                 if (num_planes > 1) {
 647                         /* Emit Cb/Cr as channel 0 and Y as channel
 648                          * 1. This matches how we set up scl0/scl1
 649                          * above.
 650                          */
 651                         vc4_write_scaling_parameters(state, 1);
 652                 }
 653                 vc4_write_scaling_parameters(state, 0);
 654
 655                 /* If any PPF setup was done, then all the kernel
 656                  * pointers get uploaded.
 657                  */
 658                 if (vc4_state->x_scaling[0] == VC4_SCALING_PPF ||
 659                     vc4_state->y_scaling[0] == VC4_SCALING_PPF ||
 660                     vc4_state->x_scaling[1] == VC4_SCALING_PPF ||
 661                     vc4_state->y_scaling[1] == VC4_SCALING_PPF) {
 662                         u32 kernel = VC4_SET_FIELD(vc4->hvs->mitchell_netravali_filter.start,
 663                                                    SCALER_PPF_KERNEL_OFFSET);
 664
 665                         /* HPPF plane 0 */
 666                         vc4_dlist_write(vc4_state, kernel);
 667                         /* VPPF plane 0 */
 668                         vc4_dlist_write(vc4_state, kernel);
 669                         /* HPPF plane 1 */
 670                         vc4_dlist_write(vc4_state, kernel);
 671                         /* VPPF plane 1 */
 672                         vc4_dlist_write(vc4_state, kernel);
 673                 }
 674         }
 675
 676         vc4_state->dlist[ctl0_offset] |=
 677                 VC4_SET_FIELD(vc4_state->dlist_count, SCALER_CTL0_SIZE);
 678
 679         return 0;
 680 }
 681
 682 /* If a modeset involves changing the setup of a plane, the atomic
 683  * infrastructure will call this to validate a proposed plane setup.
 684  * However, if a plane isn't getting updated, this (and the
 685  * corresponding vc4_plane_atomic_update) won't get called.  Thus, we
 686  * compute the dlist here and have all active plane dlists get updated
 687  * in the CRTC's flush.
 688  */
 689 static int vc4_plane_atomic_check(struct drm_plane *plane,
 690                                   struct drm_plane_state *state)
 691 {
 692         struct vc4_plane_state *vc4_state = to_vc4_plane_state(state);
 693
 694         vc4_state->dlist_count = 0;
 695
 696         if (plane_enabled(state))
 697                 return vc4_plane_mode_set(plane, state);
 698         else
 699                 return 0;
 700 }
 701
 702 static void vc4_plane_atomic_update(struct drm_plane *plane,
 703                                     struct drm_plane_state *old_state)
 704 {
 705         /* No contents here.  Since we don't know where in the CRTC's
 706          * dlist we should be stored, our dlist is uploaded to the
 707          * hardware with vc4_plane_write_dlist() at CRTC atomic_flush
 708          * time.
 709          */
 710 }
 711
 712 u32 vc4_plane_write_dlist(struct drm_plane *plane, u32 __iomem *dlist)
 713 {
 714         struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
 715         int i;
 716
 717         vc4_state->hw_dlist = dlist;
 718
 719         /* Can't memcpy_toio() because it needs to be 32-bit writes. */
 720         for (i = 0; i < vc4_state->dlist_count; i++)
 721                 writel(vc4_state->dlist[i], &dlist[i]);
 722
 723         return vc4_state->dlist_count;
 724 }
 725
 726 u32 vc4_plane_dlist_size(const struct drm_plane_state *state)
 727 {
 728         const struct vc4_plane_state *vc4_state =
 729                 container_of(state, typeof(*vc4_state), base);
 730
 731         return vc4_state->dlist_count;
 732 }
 733
 734 /* Updates the plane to immediately (well, once the FIFO needs
 735  * refilling) scan out from at a new framebuffer.
 736  */
 737 void vc4_plane_async_set_fb(struct drm_plane *plane, struct drm_framebuffer *fb)
 738 {
 739         struct vc4_plane_state *vc4_state = to_vc4_plane_state(plane->state);
 740         struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
 741         uint32_t addr;
 742
 743         /* We're skipping the address adjustment for negative origin,
 744          * because this is only called on the primary plane.
 745          */
 746         WARN_ON_ONCE(plane->state->crtc_x < 0 || plane->state->crtc_y < 0);
 747         addr = bo->paddr + fb->offsets[0];
 748
 749         /* Write the new address into the hardware immediately.  The
 750          * scanout will start from this address as soon as the FIFO
 751          * needs to refill with pixels.
 752          */
 753         writel(addr, &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
 754
 755         /* Also update the CPU-side dlist copy, so that any later
 756          * atomic updates that don't do a new modeset on our plane
 757          * also use our updated address.
 758          */
 759         vc4_state->dlist[vc4_state->ptr0_offset] = addr;
 760 }
 761
 762 static const struct drm_plane_helper_funcs vc4_plane_helper_funcs = {
 763         .atomic_check = vc4_plane_atomic_check,
 764         .atomic_update = vc4_plane_atomic_update,
 765 };
 766
 767 static void vc4_plane_destroy(struct drm_plane *plane)
 768 {
 769         drm_plane_helper_disable(plane);
 770         drm_plane_cleanup(plane);
 771 }
 772
 773 /* Implements immediate (non-vblank-synced) updates of the cursor
 774  * position, or falls back to the atomic helper otherwise.
 775  */
 776 static int
 777 vc4_update_plane(struct drm_plane *plane,
 778                  struct drm_crtc *crtc,
 779                  struct drm_framebuffer *fb,
 780                  int crtc_x, int crtc_y,
 781                  unsigned int crtc_w, unsigned int crtc_h,
 782                  uint32_t src_x, uint32_t src_y,
 783                  uint32_t src_w, uint32_t src_h,
 784                  struct drm_modeset_acquire_ctx *ctx)
 785 {
 786         struct drm_plane_state *plane_state;
 787         struct vc4_plane_state *vc4_state;
 788
 789         if (plane != crtc->cursor)
 790                 goto out;
 791
 792         plane_state = plane->state;
 793         vc4_state = to_vc4_plane_state(plane_state);
 794
 795         if (!plane_state)
 796                 goto out;
 797
 798         /* No configuring new scaling in the fast path. */
 799         if (crtc_w != plane_state->crtc_w ||
 800             crtc_h != plane_state->crtc_h ||
 801             src_w != plane_state->src_w ||
 802             src_h != plane_state->src_h) {
 803                 goto out;
 804         }
 805
 806         if (fb != plane_state->fb) {
 807                 drm_atomic_set_fb_for_plane(plane->state, fb);
 808                 vc4_plane_async_set_fb(plane, fb);
 809         }
 810
 811         /* Set the cursor's position on the screen.  This is the
 812          * expected change from the drm_mode_cursor_universal()
 813          * helper.
 814          */
 815         plane_state->crtc_x = crtc_x;
 816         plane_state->crtc_y = crtc_y;
 817
 818         /* Allow changing the start position within the cursor BO, if
 819          * that matters.
 820          */
 821         plane_state->src_x = src_x;
 822         plane_state->src_y = src_y;
 823
 824         /* Update the display list based on the new crtc_x/y. */
 825         vc4_plane_atomic_check(plane, plane_state);
 826
 827         /* Note that we can't just call vc4_plane_write_dlist()
 828          * because that would smash the context data that the HVS is
 829          * currently using.
 830          */
 831         writel(vc4_state->dlist[vc4_state->pos0_offset],
 832                &vc4_state->hw_dlist[vc4_state->pos0_offset]);
 833         writel(vc4_state->dlist[vc4_state->pos2_offset],
 834                &vc4_state->hw_dlist[vc4_state->pos2_offset]);
 835         writel(vc4_state->dlist[vc4_state->ptr0_offset],
 836                &vc4_state->hw_dlist[vc4_state->ptr0_offset]);
 837
 838         return 0;
 839
 840 out:
 841         return drm_atomic_helper_update_plane(plane, crtc, fb,
 842                                               crtc_x, crtc_y,
 843                                               crtc_w, crtc_h,
 844                                               src_x, src_y,
 845                                               src_w, src_h,
 846                                               ctx);
 847 }
 848
 849 static const struct drm_plane_funcs vc4_plane_funcs = {
 850         .update_plane = vc4_update_plane,
 851         .disable_plane = drm_atomic_helper_disable_plane,
 852         .destroy = vc4_plane_destroy,
 853         .set_property = NULL,
 854         .reset = vc4_plane_reset,
 855         .atomic_duplicate_state = vc4_plane_duplicate_state,
 856         .atomic_destroy_state = vc4_plane_destroy_state,
 857 };
 858
 859 struct drm_plane *vc4_plane_init(struct drm_device *dev,
 860                                  enum drm_plane_type type)
 861 {
 862         struct drm_plane *plane = NULL;
 863         struct vc4_plane *vc4_plane;
 864         u32 formats[ARRAY_SIZE(hvs_formats)];
 865         u32 num_formats = 0;
 866         int ret = 0;
 867         unsigned i;
 868
 869         vc4_plane = devm_kzalloc(dev->dev, sizeof(*vc4_plane),
 870                                  GFP_KERNEL);
 871         if (!vc4_plane)
 872                 return ERR_PTR(-ENOMEM);
 873
 874         for (i = 0; i < ARRAY_SIZE(hvs_formats); i++) {
 875                 /* Don't allow YUV in cursor planes, since that means
 876                  * tuning on the scaler, which we don't allow for the
 877                  * cursor.
 878                  */
 879                 if (type != DRM_PLANE_TYPE_CURSOR ||
 880                     hvs_formats[i].hvs < HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE) {
 881                         formats[num_formats++] = hvs_formats[i].drm;
 882                 }
 883         }
 884         plane = &vc4_plane->base;
 885         ret = drm_universal_plane_init(dev, plane, 0,
 886                                        &vc4_plane_funcs,
 887                                        formats, num_formats,
 888                                        type, NULL);
 889
 890         drm_plane_helper_add(plane, &vc4_plane_helper_funcs);
 891
 892         return plane;
 893 }