arch/powerpc/boot/dts/cm5200.dts

   1 /*
   2  * CM5200 board Device Tree Source
   3  *
   4  * Copyright (C) 2007 Semihalf
   5  * Marian Balakowicz <m8@semihalf.com>
   6  *
   7  * This program is free software; you can redistribute  it and/or modify it
   8  * under  the terms of  the GNU General  Public License as published by the
   9  * Free Software Foundation;  either version 2 of the  License, or (at your
  10  * option) any later version.
  11  */
  12
  13 /include/ "mpc5200b.dtsi"
  14
  15 &gpt0 { fsl,has-wdt; };
  16
  17 / {
  18         model = "schindler,cm5200";
  19         compatible = "schindler,cm5200";
  20
  21         soc5200@f0000000 {
  22                 can@900 {
  23                         status = "disabled";
  24                 };
  25
  26                 can@980 {
  27                         status = "disabled";
  28                 };
  29
  30                 psc@2000 {              // PSC1
  31                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  32                 };
  33
  34                 psc@2200 {              // PSC2
  35                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  36                 };
  37
  38                 psc@2400 {              // PSC3
  39                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  40                 };
  41
  42                 psc@2600 {              // PSC4
  43                         status = "disabled";
  44                 };
  45
  46                 psc@2800 {              // PSC5
  47                         status = "disabled";
  48                 };
  49
  50                 psc@2c00 {              // PSC6
  51                         compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
  52                 };
  53
  54                 ethernet@3000 {
  55                         phy-handle = <&phy0>;
  56                 };
  57
  58                 mdio@3000 {
  59                         phy0: ethernet-phy@0 {
  60                                 reg = <0>;
  61                         };
  62                 };
  63
  64                 ata@3a00 {
  65                         status = "disabled";
  66                 };
  67
  68                 i2c@3d00 {
  69                         status = "disabled";
  70                 };
  71
  72         };
  73
  74         pci@f0000d00 {
  75                 status = "disabled";
  76         };
  77
  78         localbus {
  79                 // 16-bit flash device at LocalPlus Bus CS0
  80                 flash@0,0 {
  81                         compatible = "cfi-flash";
  82                         reg = <0 0 0x2000000>;
  83                         bank-width = <2>;
  84                         device-width = <2>;
  85                         #size-cells = <1>;
  86                         #address-cells = <1>;
  87                 };
  88         };
  89 };