arch/arm/boot/dts/am335x-nano.dts

   1 /*
   2  * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "am33xx.dtsi"
  11
  12 / {
  13         model = "Newflow AM335x NanoBone";
  14         compatible = "ti,am33xx";
  15
  16         cpus {
  17                 cpu@0 {
  18                         cpu0-supply = <&dcdc2_reg>;
  19                 };
  20         };
  21
  22         memory {
  23                 device_type = "memory";
  24                 reg = <0x80000000 0x10000000>; /* 256 MB */
  25         };
  26
  27         leds {
  28                 compatible = "gpio-leds";
  29
  30                 led@0 {
  31                         label = "nanobone:green:usr1";
  32                         gpios = <&gpio1 5 0>;
  33                         default-state = "off";
  34                 };
  35         };
  36 };
  37
  38 &am33xx_pinmux {
  39         pinctrl-names = "default";
  40         pinctrl-0 = <&misc_pins>;
  41
  42         misc_pins: misc_pins {
  43                 pinctrl-single,pins = <
  44                         0x15c (PIN_OUTPUT | MUX_MODE7)  /* spi0_cs0.gpio0_5 */
  45                 >;
  46         };
  47
  48         gpmc_pins: gpmc_pins {
  49                 pinctrl-single,pins = <
  50                         0x0 (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad0.gpmc_ad0 */
  51                         0x4 (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad1.gpmc_ad1 */
  52                         0x8 (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad2.gpmc_ad2 */
  53                         0xc (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad3.gpmc_ad3 */
  54                         0x10 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad4.gpmc_ad4 */
  55                         0x14 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad5.gpmc_ad5 */
  56                         0x18 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad6.gpmc_ad6 */
  57                         0x1c (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad7.gpmc_ad7 */
  58                         0x20 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad8.gpmc_ad8 */
  59                         0x24 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad9.gpmc_ad9 */
  60                         0x28 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad10.gpmc_ad10 */
  61                         0x2c (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad11.gpmc_ad11 */
  62                         0x30 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad12.gpmc_ad12 */
  63                         0x34 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad13.gpmc_ad13 */
  64                         0x38 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad14.gpmc_ad14 */
  65                         0x3c (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad15.gpmc_ad15 */
  66
  67                         0x70 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_wait0.gpmc_wait0 */
  68                         0x7c (PIN_OUTPUT | MUX_MODE0)           /* gpmc_csn0.gpmc_csn0 */
  69                         0x80 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_csn1.gpmc_csn1 */
  70                         0x84 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_csn2.gpmc_csn2 */
  71                         0x88 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_csn3.gpmc_csn3 */
  72
  73                         0x90 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_advn_ale.gpmc_advn_ale */
  74                         0x94 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_oen_ren.gpmc_oen_ren */
  75                         0x98 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_wen.gpmc_wen */
  76                         0x9c (PIN_OUTPUT | MUX_MODE0)           /* gpmc_ben0_cle.gpmc_ben0_cle */
  77
  78                         0xa4 (PIN_OUTPUT | MUX_MODE1)           /* lcd_data1.gpmc_a1 */
  79                         0xa8 (PIN_OUTPUT | MUX_MODE1)           /* lcd_data2.gpmc_a2 */
  80                         0xac (PIN_OUTPUT | MUX_MODE1)           /* lcd_data3.gpmc_a3 */
  81                         0xb0 (PIN_OUTPUT | MUX_MODE1)           /* lcd_data4.gpmc_a4 */
  82                         0xb4 (PIN_OUTPUT | MUX_MODE1)           /* lcd_data5.gpmc_a5 */
  83                         0xb8 (PIN_OUTPUT | MUX_MODE1)           /* lcd_data6.gpmc_a6 */
  84                         0xbc (PIN_OUTPUT | MUX_MODE1)           /* lcd_data7.gpmc_a7 */
  85
  86                         0xe0 (PIN_OUTPUT | MUX_MODE1)           /* lcd_vsync.gpmc_a8 */
  87                         0xe4 (PIN_OUTPUT | MUX_MODE1)           /* lcd_hsync.gpmc_a9 */
  88                         0xe8 (PIN_OUTPUT | MUX_MODE1)           /* lcd_pclk.gpmc_a10 */
  89                 >;
  90         };
  91
  92         i2c0_pins: i2c0_pins {
  93                 pinctrl-single,pins = <
  94                         0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
  95                         0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
  96                 >;
  97         };
  98
  99         uart0_pins: uart0_pins {
 100                 pinctrl-single,pins = <
 101                         0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
 102                         0x174 (PIN_OUTPUT | MUX_MODE0)          /* uart0_txd.uart0_txd */
 103                 >;
 104         };
 105
 106         uart1_pins: uart1_pins {
 107                 pinctrl-single,pins = <
 108                         0x178 (PIN_OUTPUT | MUX_MODE7)          /* uart1_ctsn.uart1_ctsn */
 109                         0x17c (PIN_OUTPUT | MUX_MODE7)          /* uart1_rtsn.uart1_rtsn */
 110                         0x180 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart1_rxd.uart1_rxd */
 111                         0x184 (PIN_OUTPUT | MUX_MODE0)          /* uart1_txd.uart1_txd */
 112                 >;
 113         };
 114
 115         uart2_pins: uart2_pins {
 116                 pinctrl-single,pins = <
 117                         0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)     /* lcd_data8.gpio2[14] */
 118                         0xc4 (PIN_OUTPUT | MUX_MODE7)           /* lcd_data9.gpio2[15] */
 119                         0x150 (PIN_INPUT | MUX_MODE1)           /* spi0_sclk.uart2_rxd */
 120                         0x154 (PIN_OUTPUT | MUX_MODE1)          /* spi0_d0.uart2_txd */
 121                 >;
 122         };
 123
 124         uart3_pins: uart3_pins {
 125                 pinctrl-single,pins = <
 126                         0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)     /* lcd_data10.uart3_ctsn */
 127                         0xcc (PIN_OUTPUT | MUX_MODE6)           /* lcd_data11.uart3_rtsn */
 128                         0x160 (PIN_INPUT | MUX_MODE1)           /* spi0_cs1.uart3_rxd */
 129                         0x164 (PIN_OUTPUT | MUX_MODE1)          /* ecap0_in_pwm0_out.uart3_txd */
 130                 >;
 131         };
 132
 133         uart4_pins: uart4_pins {
 134                 pinctrl-single,pins = <
 135                         0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)     /* lcd_data12.uart4_ctsn */
 136                         0xd4 (PIN_OUTPUT | MUX_MODE6)           /* lcd_data13.uart4_rtsn */
 137                         0x168 (PIN_INPUT | MUX_MODE1)           /* uart0_ctsn.uart4_rxd */
 138                         0x16c (PIN_OUTPUT | MUX_MODE1)          /* uart0_rtsn.uart4_txd */
 139                 >;
 140         };
 141
 142         uart5_pins: uart5_pins {
 143                 pinctrl-single,pins = <
 144                         0xd8 (PIN_INPUT | MUX_MODE4)            /* lcd_data14.uart5_rxd */
 145                         0x144 (PIN_OUTPUT | MUX_MODE3)          /* rmiii1_refclk.uart5_txd */
 146                 >;
 147         };
 148
 149         mmc1_pins: mmc1_pins {
 150                 pinctrl-single,pins = <
 151                         0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)     /* mmc0_dat0.mmc0_dat0 */
 152                         0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)     /* mmc0_dat1.mmc0_dat1 */
 153                         0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)     /* mmc0_dat2.mmc0_dat2 */
 154                         0xfc (PIN_INPUT_PULLUP | MUX_MODE0)     /* mmc0_dat3.mmc0_dat3 */
 155                         0x100 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_clk.mmc0_clk */
 156                         0x104 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_cmd.mmc0_cmd */
 157                         0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)    /* emu1.gpio3[8] */
 158                         0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)    /* mcasp0_aclkr.gpio3[18] */
 159                 >;
 160         };
 161 };
 162
 163 &uart0 {
 164         pinctrl-names = "default";
 165         pinctrl-0 = <&uart0_pins>;
 166         status = "okay";
 167 };
 168
 169 &uart1 {
 170         pinctrl-names = "default";
 171         pinctrl-0 = <&uart1_pins>;
 172         status = "okay";
 173         rts-gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
 174         rs485-rts-active-high;
 175         rs485-rx-during-tx;
 176         rs485-rts-delay = <1 1>;
 177         linux,rs485-enabled-at-boot-time;
 178 };
 179
 180 &uart2 {
 181         pinctrl-names = "default";
 182         pinctrl-0 = <&uart2_pins>;
 183         status = "okay";
 184         rts-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 185         rs485-rts-active-high;
 186         rs485-rts-delay = <1 1>;
 187         linux,rs485-enabled-at-boot-time;
 188 };
 189
 190 &uart3 {
 191         pinctrl-names = "default";
 192         pinctrl-0 = <&uart3_pins>;
 193         status = "okay";
 194 };
 195
 196 &uart4 {
 197         pinctrl-names = "default";
 198         pinctrl-0 = <&uart4_pins>;
 199         status = "okay";
 200 };
 201
 202 &uart5 {
 203         pinctrl-names = "default";
 204         pinctrl-0 = <&uart5_pins>;
 205         status = "okay";
 206 };
 207
 208 &i2c0 {
 209         status = "okay";
 210         pinctrl-names = "default";
 211         clock-frequency = <400000>;
 212         pinctrl-names = "default";
 213         pinctrl-0 = <&i2c0_pins>;
 214
 215         gpio@20 {
 216                 compatible = "microchip,mcp23017";
 217                 gpio-controller;
 218                 #gpio-cells = <2>;
 219                 reg = <0x20>;
 220         };
 221
 222         tps: tps@24 {
 223                 reg = <0x24>;
 224         };
 225
 226         eeprom@53 {
 227                 compatible = "microchip,24c02";
 228                 reg = <0x53>;
 229                 pagesize = <8>;
 230         };
 231
 232         rtc@68 {
 233                 compatible = "dallas,ds1307";
 234                 reg = <0x68>;
 235         };
 236 };
 237
 238 &elm {
 239         status = "okay";
 240 };
 241
 242 &gpmc {
 243         compatible = "ti,am3352-gpmc";
 244         ti,hwmods = "gpmc";
 245         status = "okay";
 246         gpmc,num-waitpins = <2>;
 247         pinctrl-names = "default";
 248         pinctrl-0 = <&gpmc_pins>;
 249
 250         #address-cells = <2>;
 251         #size-cells = <1>;
 252         ranges = <0 0 0x08000000 0x08000000>;   /* CS0: NOR 128M */
 253
 254         nor@0,0 {
 255                 reg = <0 0x00000000 0x08000000>;
 256                 compatible = "cfi-flash";
 257                 linux,mtd-name = "spansion,s29gl010p11t";
 258                 bank-width = <2>;
 259
 260                 gpmc,mux-add-data = <2>;
 261
 262                 gpmc,sync-clk-ps = <0>;
 263                 gpmc,cs-on-ns = <0>;
 264                 gpmc,cs-rd-off-ns = <160>;
 265                 gpmc,cs-wr-off-ns = <160>;
 266                 gpmc,adv-on-ns = <10>;
 267                 gpmc,adv-rd-off-ns = <30>;
 268                 gpmc,adv-wr-off-ns = <30>;
 269                 gpmc,oe-on-ns = <40>;
 270                 gpmc,oe-off-ns = <160>;
 271                 gpmc,we-on-ns = <40>;
 272                 gpmc,we-off-ns = <160>;
 273                 gpmc,rd-cycle-ns = <160>;
 274                 gpmc,wr-cycle-ns = <160>;
 275                 gpmc,access-ns = <150>;
 276                 gpmc,page-burst-access-ns = <10>;
 277                 gpmc,cycle2cycle-samecsen;
 278                 gpmc,cycle2cycle-delay-ns = <20>;
 279                 gpmc,wr-data-mux-bus-ns = <70>;
 280                 gpmc,wr-access-ns = <80>;
 281
 282                 #address-cells = <1>;
 283                 #size-cells = <1>;
 284
 285                 /*
 286                 MTD partition table
 287                 ===================
 288                 +------------+-->0x00000000-> U-Boot start
 289                 |            |
 290                 |            |-->0x000BFFFF-> U-Boot end
 291                 |            |-->0x000C0000-> ENV1 start
 292                 |            |
 293                 |            |-->0x000DFFFF-> ENV1 end
 294                 |            |-->0x000E0000-> ENV2 start
 295                 |            |
 296                 |            |-->0x000FFFFF-> ENV2 end
 297                 |            |-->0x00100000-> Kernel start
 298                 |            |
 299                 |            |-->0x004FFFFF-> Kernel end
 300                 |            |-->0x00500000-> File system start
 301                 |            |
 302                 |            |-->0x01FFFFFF-> File system end
 303                 |            |-->0x02000000-> User data start
 304                 |            |
 305                 |            |-->0x03FFFFFF-> User data end
 306                 |            |-->0x04000000-> Data storage start
 307                 |            |
 308                 +------------+-->0x08000000-> NOR end (Free end)
 309                 */
 310                 partition@0 {
 311                         label = "boot";
 312                         reg = <0x00000000 0x000c0000>; /* 768KB */
 313                 };
 314
 315                 partition@1 {
 316                         label = "env1";
 317                         reg = <0x000c0000 0x00020000>; /* 128KB */
 318                 };
 319
 320                 partition@2 {
 321                         label = "env2";
 322                         reg = <0x000e0000 0x00020000>; /* 128KB */
 323                 };
 324
 325                 partition@3 {
 326                         label = "kernel";
 327                         reg = <0x00100000 0x00400000>; /* 4MB */
 328                 };
 329
 330                 partition@4 {
 331                         label = "rootfs";
 332                         reg = <0x00500000 0x01b00000>; /* 27MB */
 333                 };
 334
 335                 partition@5 {
 336                         label = "user";
 337                         reg = <0x02000000 0x02000000>; /* 32MB */
 338                 };
 339
 340                 partition@6 {
 341                         label = "data";
 342                         reg = <0x04000000 0x04000000>; /* 64MB */
 343                 };
 344         };
 345 };
 346
 347 &mac {
 348         dual_emac;
 349         status = "okay";
 350 };
 351
 352 &davinci_mdio {
 353         status = "okay";
 354 };
 355
 356 &cpsw_emac0 {
 357         phy_id = <&davinci_mdio>, <0>;
 358         phy-mode = "mii";
 359         dual_emac_res_vlan = <1>;
 360 };
 361
 362 &cpsw_emac1 {
 363         phy_id = <&davinci_mdio>, <1>;
 364         phy-mode = "mii";
 365         dual_emac_res_vlan = <2>;
 366 };
 367
 368 &mmc1 {
 369         status = "okay";
 370         vmmc-supply = <&ldo4_reg>;
 371         pinctrl-names = "default";
 372         pinctrl-0 = <&mmc1_pins>;
 373         bus-width = <4>;
 374         cd-gpios = <&gpio3 8 0>;
 375         wp-gpios = <&gpio3 18 0>;
 376 };
 377
 378 #include "tps65217.dtsi"
 379
 380 &tps {
 381         regulators {
 382                 dcdc1_reg: regulator@0 {
 383                         /* +1.5V voltage with ±4% tolerance */
 384                         regulator-min-microvolt = <1450000>;
 385                         regulator-max-microvolt = <1550000>;
 386                         regulator-boot-on;
 387                         regulator-always-on;
 388                 };
 389
 390                 dcdc2_reg: regulator@1 {
 391                         /* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
 392                         regulator-name = "vdd_mpu";
 393                         regulator-min-microvolt = <915000>;
 394                         regulator-max-microvolt = <1140000>;
 395                         regulator-boot-on;
 396                         regulator-always-on;
 397                 };
 398
 399                 dcdc3_reg: regulator@2 {
 400                         /* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
 401                         regulator-name = "vdd_core";
 402                         regulator-min-microvolt = <915000>;
 403                         regulator-max-microvolt = <1140000>;
 404                         regulator-boot-on;
 405                         regulator-always-on;
 406                 };
 407
 408                 ldo1_reg: regulator@3 {
 409                         /* +1.8V voltage with ±4% tolerance */
 410                         regulator-min-microvolt = <1750000>;
 411                         regulator-max-microvolt = <1870000>;
 412                         regulator-boot-on;
 413                         regulator-always-on;
 414                 };
 415
 416                 ldo2_reg: regulator@4 {
 417                         /* +3.3V voltage with ±4% tolerance */
 418                         regulator-min-microvolt = <3175000>;
 419                         regulator-max-microvolt = <3430000>;
 420                         regulator-boot-on;
 421                         regulator-always-on;
 422                 };
 423
 424                 ldo3_reg: regulator@5 {
 425                         /* +1.8V voltage with ±4% tolerance */
 426                         regulator-min-microvolt = <1750000>;
 427                         regulator-max-microvolt = <1870000>;
 428                         regulator-boot-on;
 429                         regulator-always-on;
 430                 };
 431
 432                 ldo4_reg: regulator@6 {
 433                         /* +3.3V voltage with ±4% tolerance */
 434                         regulator-min-microvolt = <3175000>;
 435                         regulator-max-microvolt = <3430000>;
 436                         regulator-boot-on;
 437                         regulator-always-on;
 438                 };
 439         };
 440 };