| blob | c5b57d4adadee9eb5094d620f57db28442ffee48 |
1 /*
2 * Copyright 2012 Freescale Semiconductor, Inc.
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
12 #include <dt-bindings/gpio/gpio.h>
13 #include "skeleton.dtsi"
14 #include "imx28-pinfunc.h"
16 / {
17 interrupt-parent = <&icoll>;
19 aliases {
20 ethernet0 = &mac0;
21 ethernet1 = &mac1;
22 gpio0 = &gpio0;
23 gpio1 = &gpio1;
24 gpio2 = &gpio2;
25 gpio3 = &gpio3;
26 gpio4 = &gpio4;
27 saif0 = &saif0;
28 saif1 = &saif1;
29 serial0 = &auart0;
30 serial1 = &auart1;
31 serial2 = &auart2;
32 serial3 = &auart3;
33 serial4 = &auart4;
34 spi0 = &ssp1;
35 spi1 = &ssp2;
36 usbphy0 = &usbphy0;
37 usbphy1 = &usbphy1;
38 };
40 cpus {
41 #address-cells = <0>;
42 #size-cells = <0>;
44 cpu {
45 compatible = "arm,arm926ej-s";
46 device_type = "cpu";
47 };
48 };
50 apb@80000000 {
51 compatible = "simple-bus";
52 #address-cells = <1>;
53 #size-cells = <1>;
54 reg = <0x80000000 0x80000>;
55 ranges;
57 apbh@80000000 {
58 compatible = "simple-bus";
59 #address-cells = <1>;
60 #size-cells = <1>;
61 reg = <0x80000000 0x3c900>;
62 ranges;
64 icoll: interrupt-controller@80000000 {
65 compatible = "fsl,imx28-icoll", "fsl,icoll";
66 interrupt-controller;
67 #interrupt-cells = <1>;
68 reg = <0x80000000 0x2000>;
69 };
71 hsadc: hsadc@80002000 {
72 reg = <0x80002000 0x2000>;
73 interrupts = <13>;
74 dmas = <&dma_apbh 12>;
75 dma-names = "rx";
76 status = "disabled";
77 };
79 dma_apbh: dma-apbh@80004000 {
80 compatible = "fsl,imx28-dma-apbh";
81 reg = <0x80004000 0x2000>;
82 interrupts = <82 83 84 85
83 88 88 88 88
84 88 88 88 88
85 87 86 0 0>;
86 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
87 "gpmi0", "gmpi1", "gpmi2", "gmpi3",
88 "gpmi4", "gmpi5", "gpmi6", "gmpi7",
89 "hsadc", "lcdif", "empty", "empty";
90 #dma-cells = <1>;
91 dma-channels = <16>;
92 clocks = <&clks 25>;
93 };
95 perfmon: perfmon@80006000 {
96 reg = <0x80006000 0x800>;
97 interrupts = <27>;
98 status = "disabled";
99 };
101 gpmi: gpmi-nand@8000c000 {
102 compatible = "fsl,imx28-gpmi-nand";
103 #address-cells = <1>;
104 #size-cells = <1>;
105 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
106 reg-names = "gpmi-nand", "bch";
107 interrupts = <41>;
108 interrupt-names = "bch";
109 clocks = <&clks 50>;
110 clock-names = "gpmi_io";
111 dmas = <&dma_apbh 4>;
112 dma-names = "rx-tx";
113 status = "disabled";
114 };
116 ssp0: ssp@80010000 {
117 #address-cells = <1>;
118 #size-cells = <0>;
119 reg = <0x80010000 0x2000>;
120 interrupts = <96>;
121 clocks = <&clks 46>;
122 dmas = <&dma_apbh 0>;
123 dma-names = "rx-tx";
124 status = "disabled";
125 };
127 ssp1: ssp@80012000 {
128 #address-cells = <1>;
129 #size-cells = <0>;
130 reg = <0x80012000 0x2000>;
131 interrupts = <97>;
132 clocks = <&clks 47>;
133 dmas = <&dma_apbh 1>;
134 dma-names = "rx-tx";
135 status = "disabled";
136 };
138 ssp2: ssp@80014000 {
139 #address-cells = <1>;
140 #size-cells = <0>;
141 reg = <0x80014000 0x2000>;
142 interrupts = <98>;
143 clocks = <&clks 48>;
144 dmas = <&dma_apbh 2>;
145 dma-names = "rx-tx";
146 status = "disabled";
147 };
149 ssp3: ssp@80016000 {
150 #address-cells = <1>;
151 #size-cells = <0>;
152 reg = <0x80016000 0x2000>;
153 interrupts = <99>;
154 clocks = <&clks 49>;
155 dmas = <&dma_apbh 3>;
156 dma-names = "rx-tx";
157 status = "disabled";
158 };
160 pinctrl: pinctrl@80018000 {
161 #address-cells = <1>;
162 #size-cells = <0>;
163 compatible = "fsl,imx28-pinctrl", "simple-bus";
164 reg = <0x80018000 0x2000>;
166 gpio0: gpio@0 {
167 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
168 interrupts = <127>;
169 gpio-controller;
170 #gpio-cells = <2>;
171 interrupt-controller;
172 #interrupt-cells = <2>;
173 };
175 gpio1: gpio@1 {
176 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
177 interrupts = <126>;
178 gpio-controller;
179 #gpio-cells = <2>;
180 interrupt-controller;
181 #interrupt-cells = <2>;
182 };
184 gpio2: gpio@2 {
185 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
186 interrupts = <125>;
187 gpio-controller;
188 #gpio-cells = <2>;
189 interrupt-controller;
190 #interrupt-cells = <2>;
191 };
193 gpio3: gpio@3 {
194 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
195 interrupts = <124>;
196 gpio-controller;
197 #gpio-cells = <2>;
198 interrupt-controller;
199 #interrupt-cells = <2>;
200 };
202 gpio4: gpio@4 {
203 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
204 interrupts = <123>;
205 gpio-controller;
206 #gpio-cells = <2>;
207 interrupt-controller;
208 #interrupt-cells = <2>;
209 };
211 duart_pins_a: duart@0 {
212 reg = <0>;
213 fsl,pinmux-ids = <
214 MX28_PAD_PWM0__DUART_RX
215 MX28_PAD_PWM1__DUART_TX
216 >;
217 fsl,drive-strength = <MXS_DRIVE_4mA>;
218 fsl,voltage = <MXS_VOLTAGE_HIGH>;
219 fsl,pull-up = <MXS_PULL_DISABLE>;
220 };
222 duart_pins_b: duart@1 {
223 reg = <1>;
224 fsl,pinmux-ids = <
225 MX28_PAD_AUART0_CTS__DUART_RX
226 MX28_PAD_AUART0_RTS__DUART_TX
227 >;
228 fsl,drive-strength = <MXS_DRIVE_4mA>;
229 fsl,voltage = <MXS_VOLTAGE_HIGH>;
230 fsl,pull-up = <MXS_PULL_DISABLE>;
231 };
233 duart_4pins_a: duart-4pins@0 {
234 reg = <0>;
235 fsl,pinmux-ids = <
236 MX28_PAD_AUART0_CTS__DUART_RX
237 MX28_PAD_AUART0_RTS__DUART_TX
238 MX28_PAD_AUART0_RX__DUART_CTS
239 MX28_PAD_AUART0_TX__DUART_RTS
240 >;
241 fsl,drive-strength = <MXS_DRIVE_4mA>;
242 fsl,voltage = <MXS_VOLTAGE_HIGH>;
243 fsl,pull-up = <MXS_PULL_DISABLE>;
244 };
246 gpmi_pins_a: gpmi-nand@0 {
247 reg = <0>;
248 fsl,pinmux-ids = <
249 MX28_PAD_GPMI_D00__GPMI_D0
250 MX28_PAD_GPMI_D01__GPMI_D1
251 MX28_PAD_GPMI_D02__GPMI_D2
252 MX28_PAD_GPMI_D03__GPMI_D3
253 MX28_PAD_GPMI_D04__GPMI_D4
254 MX28_PAD_GPMI_D05__GPMI_D5
255 MX28_PAD_GPMI_D06__GPMI_D6
256 MX28_PAD_GPMI_D07__GPMI_D7
257 MX28_PAD_GPMI_CE0N__GPMI_CE0N
258 MX28_PAD_GPMI_RDY0__GPMI_READY0
259 MX28_PAD_GPMI_RDN__GPMI_RDN
260 MX28_PAD_GPMI_WRN__GPMI_WRN
261 MX28_PAD_GPMI_ALE__GPMI_ALE
262 MX28_PAD_GPMI_CLE__GPMI_CLE
263 MX28_PAD_GPMI_RESETN__GPMI_RESETN
264 >;
265 fsl,drive-strength = <MXS_DRIVE_4mA>;
266 fsl,voltage = <MXS_VOLTAGE_HIGH>;
267 fsl,pull-up = <MXS_PULL_DISABLE>;
268 };
270 gpmi_status_cfg: gpmi-status-cfg {
271 fsl,pinmux-ids = <
272 MX28_PAD_GPMI_RDN__GPMI_RDN
273 MX28_PAD_GPMI_WRN__GPMI_WRN
274 MX28_PAD_GPMI_RESETN__GPMI_RESETN
275 >;
276 fsl,drive-strength = <MXS_DRIVE_12mA>;
277 };
279 auart0_pins_a: auart0@0 {
280 reg = <0>;
281 fsl,pinmux-ids = <
282 MX28_PAD_AUART0_RX__AUART0_RX
283 MX28_PAD_AUART0_TX__AUART0_TX
284 MX28_PAD_AUART0_CTS__AUART0_CTS
285 MX28_PAD_AUART0_RTS__AUART0_RTS
286 >;
287 fsl,drive-strength = <MXS_DRIVE_4mA>;
288 fsl,voltage = <MXS_VOLTAGE_HIGH>;
289 fsl,pull-up = <MXS_PULL_DISABLE>;
290 };
292 auart0_2pins_a: auart0-2pins@0 {
293 reg = <0>;
294 fsl,pinmux-ids = <
295 MX28_PAD_AUART0_RX__AUART0_RX
296 MX28_PAD_AUART0_TX__AUART0_TX
297 >;
298 fsl,drive-strength = <MXS_DRIVE_4mA>;
299 fsl,voltage = <MXS_VOLTAGE_HIGH>;
300 fsl,pull-up = <MXS_PULL_DISABLE>;
301 };
303 auart1_pins_a: auart1@0 {
304 reg = <0>;
305 fsl,pinmux-ids = <
306 MX28_PAD_AUART1_RX__AUART1_RX
307 MX28_PAD_AUART1_TX__AUART1_TX
308 MX28_PAD_AUART1_CTS__AUART1_CTS
309 MX28_PAD_AUART1_RTS__AUART1_RTS
310 >;
311 fsl,drive-strength = <MXS_DRIVE_4mA>;
312 fsl,voltage = <MXS_VOLTAGE_HIGH>;
313 fsl,pull-up = <MXS_PULL_DISABLE>;
314 };
316 auart1_2pins_a: auart1-2pins@0 {
317 reg = <0>;
318 fsl,pinmux-ids = <
319 MX28_PAD_AUART1_RX__AUART1_RX
320 MX28_PAD_AUART1_TX__AUART1_TX
321 >;
322 fsl,drive-strength = <MXS_DRIVE_4mA>;
323 fsl,voltage = <MXS_VOLTAGE_HIGH>;
324 fsl,pull-up = <MXS_PULL_DISABLE>;
325 };
327 auart2_2pins_a: auart2-2pins@0 {
328 reg = <0>;
329 fsl,pinmux-ids = <
330 MX28_PAD_SSP2_SCK__AUART2_RX
331 MX28_PAD_SSP2_MOSI__AUART2_TX
332 >;
333 fsl,drive-strength = <MXS_DRIVE_4mA>;
334 fsl,voltage = <MXS_VOLTAGE_HIGH>;
335 fsl,pull-up = <MXS_PULL_DISABLE>;
336 };
338 auart2_2pins_b: auart2-2pins@1 {
339 reg = <1>;
340 fsl,pinmux-ids = <
341 MX28_PAD_AUART2_RX__AUART2_RX
342 MX28_PAD_AUART2_TX__AUART2_TX
343 >;
344 fsl,drive-strength = <MXS_DRIVE_4mA>;
345 fsl,voltage = <MXS_VOLTAGE_HIGH>;
346 fsl,pull-up = <MXS_PULL_DISABLE>;
347 };
349 auart2_pins_a: auart2-pins@0 {
350 reg = <0>;
351 fsl,pinmux-ids = <
352 MX28_PAD_AUART2_RX__AUART2_RX
353 MX28_PAD_AUART2_TX__AUART2_TX
354 MX28_PAD_AUART2_CTS__AUART2_CTS
355 MX28_PAD_AUART2_RTS__AUART2_RTS
356 >;
357 fsl,drive-strength = <MXS_DRIVE_4mA>;
358 fsl,voltage = <MXS_VOLTAGE_HIGH>;
359 fsl,pull-up = <MXS_PULL_DISABLE>;
360 };
362 auart3_pins_a: auart3@0 {
363 reg = <0>;
364 fsl,pinmux-ids = <
365 MX28_PAD_AUART3_RX__AUART3_RX
366 MX28_PAD_AUART3_TX__AUART3_TX
367 MX28_PAD_AUART3_CTS__AUART3_CTS
368 MX28_PAD_AUART3_RTS__AUART3_RTS
369 >;
370 fsl,drive-strength = <MXS_DRIVE_4mA>;
371 fsl,voltage = <MXS_VOLTAGE_HIGH>;
372 fsl,pull-up = <MXS_PULL_DISABLE>;
373 };
375 auart3_2pins_a: auart3-2pins@0 {
376 reg = <0>;
377 fsl,pinmux-ids = <
378 MX28_PAD_SSP2_MISO__AUART3_RX
379 MX28_PAD_SSP2_SS0__AUART3_TX
380 >;
381 fsl,drive-strength = <MXS_DRIVE_4mA>;
382 fsl,voltage = <MXS_VOLTAGE_HIGH>;
383 fsl,pull-up = <MXS_PULL_DISABLE>;
384 };
386 auart3_2pins_b: auart3-2pins@1 {
387 reg = <1>;
388 fsl,pinmux-ids = <
389 MX28_PAD_AUART3_RX__AUART3_RX
390 MX28_PAD_AUART3_TX__AUART3_TX
391 >;
392 fsl,drive-strength = <MXS_DRIVE_4mA>;
393 fsl,voltage = <MXS_VOLTAGE_HIGH>;
394 fsl,pull-up = <MXS_PULL_DISABLE>;
395 };
397 auart4_2pins_a: auart4@0 {
398 reg = <0>;
399 fsl,pinmux-ids = <
400 MX28_PAD_SSP3_SCK__AUART4_TX
401 MX28_PAD_SSP3_MOSI__AUART4_RX
402 >;
403 fsl,drive-strength = <MXS_DRIVE_4mA>;
404 fsl,voltage = <MXS_VOLTAGE_HIGH>;
405 fsl,pull-up = <MXS_PULL_DISABLE>;
406 };
408 mac0_pins_a: mac0@0 {
409 reg = <0>;
410 fsl,pinmux-ids = <
411 MX28_PAD_ENET0_MDC__ENET0_MDC
412 MX28_PAD_ENET0_MDIO__ENET0_MDIO
413 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
414 MX28_PAD_ENET0_RXD0__ENET0_RXD0
415 MX28_PAD_ENET0_RXD1__ENET0_RXD1
416 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
417 MX28_PAD_ENET0_TXD0__ENET0_TXD0
418 MX28_PAD_ENET0_TXD1__ENET0_TXD1
419 MX28_PAD_ENET_CLK__CLKCTRL_ENET
420 >;
421 fsl,drive-strength = <MXS_DRIVE_8mA>;
422 fsl,voltage = <MXS_VOLTAGE_HIGH>;
423 fsl,pull-up = <MXS_PULL_ENABLE>;
424 };
426 mac1_pins_a: mac1@0 {
427 reg = <0>;
428 fsl,pinmux-ids = <
429 MX28_PAD_ENET0_CRS__ENET1_RX_EN
430 MX28_PAD_ENET0_RXD2__ENET1_RXD0
431 MX28_PAD_ENET0_RXD3__ENET1_RXD1
432 MX28_PAD_ENET0_COL__ENET1_TX_EN
433 MX28_PAD_ENET0_TXD2__ENET1_TXD0
434 MX28_PAD_ENET0_TXD3__ENET1_TXD1
435 >;
436 fsl,drive-strength = <MXS_DRIVE_8mA>;
437 fsl,voltage = <MXS_VOLTAGE_HIGH>;
438 fsl,pull-up = <MXS_PULL_ENABLE>;
439 };
441 mmc0_8bit_pins_a: mmc0-8bit@0 {
442 reg = <0>;
443 fsl,pinmux-ids = <
444 MX28_PAD_SSP0_DATA0__SSP0_D0
445 MX28_PAD_SSP0_DATA1__SSP0_D1
446 MX28_PAD_SSP0_DATA2__SSP0_D2
447 MX28_PAD_SSP0_DATA3__SSP0_D3
448 MX28_PAD_SSP0_DATA4__SSP0_D4
449 MX28_PAD_SSP0_DATA5__SSP0_D5
450 MX28_PAD_SSP0_DATA6__SSP0_D6
451 MX28_PAD_SSP0_DATA7__SSP0_D7
452 MX28_PAD_SSP0_CMD__SSP0_CMD
453 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
454 MX28_PAD_SSP0_SCK__SSP0_SCK
455 >;
456 fsl,drive-strength = <MXS_DRIVE_8mA>;
457 fsl,voltage = <MXS_VOLTAGE_HIGH>;
458 fsl,pull-up = <MXS_PULL_ENABLE>;
459 };
461 mmc0_4bit_pins_a: mmc0-4bit@0 {
462 reg = <0>;
463 fsl,pinmux-ids = <
464 MX28_PAD_SSP0_DATA0__SSP0_D0
465 MX28_PAD_SSP0_DATA1__SSP0_D1
466 MX28_PAD_SSP0_DATA2__SSP0_D2
467 MX28_PAD_SSP0_DATA3__SSP0_D3
468 MX28_PAD_SSP0_CMD__SSP0_CMD
469 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
470 MX28_PAD_SSP0_SCK__SSP0_SCK
471 >;
472 fsl,drive-strength = <MXS_DRIVE_8mA>;
473 fsl,voltage = <MXS_VOLTAGE_HIGH>;
474 fsl,pull-up = <MXS_PULL_ENABLE>;
475 };
477 mmc0_cd_cfg: mmc0-cd-cfg {
478 fsl,pinmux-ids = <
479 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
480 >;
481 fsl,pull-up = <MXS_PULL_DISABLE>;
482 };
484 mmc0_sck_cfg: mmc0-sck-cfg {
485 fsl,pinmux-ids = <
486 MX28_PAD_SSP0_SCK__SSP0_SCK
487 >;
488 fsl,drive-strength = <MXS_DRIVE_12mA>;
489 fsl,pull-up = <MXS_PULL_DISABLE>;
490 };
492 mmc1_4bit_pins_a: mmc1-4bit@0 {
493 reg = <0>;
494 fsl,pinmux-ids = <
495 MX28_PAD_GPMI_D00__SSP1_D0
496 MX28_PAD_GPMI_D01__SSP1_D1
497 MX28_PAD_GPMI_D02__SSP1_D2
498 MX28_PAD_GPMI_D03__SSP1_D3
499 MX28_PAD_GPMI_RDY1__SSP1_CMD
500 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
501 MX28_PAD_GPMI_WRN__SSP1_SCK
502 >;
503 fsl,drive-strength = <MXS_DRIVE_8mA>;
504 fsl,voltage = <MXS_VOLTAGE_HIGH>;
505 fsl,pull-up = <MXS_PULL_ENABLE>;
506 };
508 mmc1_cd_cfg: mmc1-cd-cfg {
509 fsl,pinmux-ids = <
510 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
511 >;
512 fsl,pull-up = <MXS_PULL_DISABLE>;
513 };
515 mmc1_sck_cfg: mmc1-sck-cfg {
516 fsl,pinmux-ids = <
517 MX28_PAD_GPMI_WRN__SSP1_SCK
518 >;
519 fsl,drive-strength = <MXS_DRIVE_12mA>;
520 fsl,pull-up = <MXS_PULL_DISABLE>;
521 };
524 mmc2_4bit_pins_a: mmc2-4bit@0 {
525 reg = <0>;
526 fsl,pinmux-ids = <
527 MX28_PAD_SSP0_DATA4__SSP2_D0
528 MX28_PAD_SSP1_SCK__SSP2_D1
529 MX28_PAD_SSP1_CMD__SSP2_D2
530 MX28_PAD_SSP0_DATA5__SSP2_D3
531 MX28_PAD_SSP0_DATA6__SSP2_CMD
532 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
533 MX28_PAD_SSP0_DATA7__SSP2_SCK
534 >;
535 fsl,drive-strength = <MXS_DRIVE_8mA>;
536 fsl,voltage = <MXS_VOLTAGE_HIGH>;
537 fsl,pull-up = <MXS_PULL_ENABLE>;
538 };
540 mmc2_cd_cfg: mmc2-cd-cfg {
541 fsl,pinmux-ids = <
542 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
543 >;
544 fsl,pull-up = <MXS_PULL_DISABLE>;
545 };
547 mmc2_sck_cfg: mmc2-sck-cfg {
548 fsl,pinmux-ids = <
549 MX28_PAD_SSP0_DATA7__SSP2_SCK
550 >;
551 fsl,drive-strength = <MXS_DRIVE_12mA>;
552 fsl,pull-up = <MXS_PULL_DISABLE>;
553 };
555 i2c0_pins_a: i2c0@0 {
556 reg = <0>;
557 fsl,pinmux-ids = <
558 MX28_PAD_I2C0_SCL__I2C0_SCL
559 MX28_PAD_I2C0_SDA__I2C0_SDA
560 >;
561 fsl,drive-strength = <MXS_DRIVE_8mA>;
562 fsl,voltage = <MXS_VOLTAGE_HIGH>;
563 fsl,pull-up = <MXS_PULL_ENABLE>;
564 };
566 i2c0_pins_b: i2c0@1 {
567 reg = <1>;
568 fsl,pinmux-ids = <
569 MX28_PAD_AUART0_RX__I2C0_SCL
570 MX28_PAD_AUART0_TX__I2C0_SDA
571 >;
572 fsl,drive-strength = <MXS_DRIVE_8mA>;
573 fsl,voltage = <MXS_VOLTAGE_HIGH>;
574 fsl,pull-up = <MXS_PULL_ENABLE>;
575 };
577 i2c1_pins_a: i2c1@0 {
578 reg = <0>;
579 fsl,pinmux-ids = <
580 MX28_PAD_PWM0__I2C1_SCL
581 MX28_PAD_PWM1__I2C1_SDA
582 >;
583 fsl,drive-strength = <MXS_DRIVE_8mA>;
584 fsl,voltage = <MXS_VOLTAGE_HIGH>;
585 fsl,pull-up = <MXS_PULL_ENABLE>;
586 };
588 i2c1_pins_b: i2c1@1 {
589 reg = <1>;
590 fsl,pinmux-ids = <
591 MX28_PAD_AUART2_CTS__I2C1_SCL
592 MX28_PAD_AUART2_RTS__I2C1_SDA
593 >;
594 fsl,drive-strength = <MXS_DRIVE_8mA>;
595 fsl,voltage = <MXS_VOLTAGE_HIGH>;
596 fsl,pull-up = <MXS_PULL_ENABLE>;
597 };
599 saif0_pins_a: saif0@0 {
600 reg = <0>;
601 fsl,pinmux-ids = <
602 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
603 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
604 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
605 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
606 >;
607 fsl,drive-strength = <MXS_DRIVE_12mA>;
608 fsl,voltage = <MXS_VOLTAGE_HIGH>;
609 fsl,pull-up = <MXS_PULL_ENABLE>;
610 };
612 saif0_pins_b: saif0@1 {
613 reg = <1>;
614 fsl,pinmux-ids = <
615 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
616 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
617 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
618 >;
619 fsl,drive-strength = <MXS_DRIVE_12mA>;
620 fsl,voltage = <MXS_VOLTAGE_HIGH>;
621 fsl,pull-up = <MXS_PULL_ENABLE>;
622 };
624 saif1_pins_a: saif1@0 {
625 reg = <0>;
626 fsl,pinmux-ids = <
627 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
628 >;
629 fsl,drive-strength = <MXS_DRIVE_12mA>;
630 fsl,voltage = <MXS_VOLTAGE_HIGH>;
631 fsl,pull-up = <MXS_PULL_ENABLE>;
632 };
634 pwm0_pins_a: pwm0@0 {
635 reg = <0>;
636 fsl,pinmux-ids = <
637 MX28_PAD_PWM0__PWM_0
638 >;
639 fsl,drive-strength = <MXS_DRIVE_4mA>;
640 fsl,voltage = <MXS_VOLTAGE_HIGH>;
641 fsl,pull-up = <MXS_PULL_DISABLE>;
642 };
644 pwm2_pins_a: pwm2@0 {
645 reg = <0>;
646 fsl,pinmux-ids = <
647 MX28_PAD_PWM2__PWM_2
648 >;
649 fsl,drive-strength = <MXS_DRIVE_4mA>;
650 fsl,voltage = <MXS_VOLTAGE_HIGH>;
651 fsl,pull-up = <MXS_PULL_DISABLE>;
652 };
654 pwm3_pins_a: pwm3@0 {
655 reg = <0>;
656 fsl,pinmux-ids = <
657 MX28_PAD_PWM3__PWM_3
658 >;
659 fsl,drive-strength = <MXS_DRIVE_4mA>;
660 fsl,voltage = <MXS_VOLTAGE_HIGH>;
661 fsl,pull-up = <MXS_PULL_DISABLE>;
662 };
664 pwm3_pins_b: pwm3@1 {
665 reg = <1>;
666 fsl,pinmux-ids = <
667 MX28_PAD_SAIF0_MCLK__PWM_3
668 >;
669 fsl,drive-strength = <MXS_DRIVE_4mA>;
670 fsl,voltage = <MXS_VOLTAGE_HIGH>;
671 fsl,pull-up = <MXS_PULL_DISABLE>;
672 };
674 pwm4_pins_a: pwm4@0 {
675 reg = <0>;
676 fsl,pinmux-ids = <
677 MX28_PAD_PWM4__PWM_4
678 >;
679 fsl,drive-strength = <MXS_DRIVE_4mA>;
680 fsl,voltage = <MXS_VOLTAGE_HIGH>;
681 fsl,pull-up = <MXS_PULL_DISABLE>;
682 };
684 lcdif_24bit_pins_a: lcdif-24bit@0 {
685 reg = <0>;
686 fsl,pinmux-ids = <
687 MX28_PAD_LCD_D00__LCD_D0
688 MX28_PAD_LCD_D01__LCD_D1
689 MX28_PAD_LCD_D02__LCD_D2
690 MX28_PAD_LCD_D03__LCD_D3
691 MX28_PAD_LCD_D04__LCD_D4
692 MX28_PAD_LCD_D05__LCD_D5
693 MX28_PAD_LCD_D06__LCD_D6
694 MX28_PAD_LCD_D07__LCD_D7
695 MX28_PAD_LCD_D08__LCD_D8
696 MX28_PAD_LCD_D09__LCD_D9
697 MX28_PAD_LCD_D10__LCD_D10
698 MX28_PAD_LCD_D11__LCD_D11
699 MX28_PAD_LCD_D12__LCD_D12
700 MX28_PAD_LCD_D13__LCD_D13
701 MX28_PAD_LCD_D14__LCD_D14
702 MX28_PAD_LCD_D15__LCD_D15
703 MX28_PAD_LCD_D16__LCD_D16
704 MX28_PAD_LCD_D17__LCD_D17
705 MX28_PAD_LCD_D18__LCD_D18
706 MX28_PAD_LCD_D19__LCD_D19
707 MX28_PAD_LCD_D20__LCD_D20
708 MX28_PAD_LCD_D21__LCD_D21
709 MX28_PAD_LCD_D22__LCD_D22
710 MX28_PAD_LCD_D23__LCD_D23
711 >;
712 fsl,drive-strength = <MXS_DRIVE_4mA>;
713 fsl,voltage = <MXS_VOLTAGE_HIGH>;
714 fsl,pull-up = <MXS_PULL_DISABLE>;
715 };
717 lcdif_18bit_pins_a: lcdif-18bit@0 {
718 reg = <0>;
719 fsl,pinmux-ids = <
720 MX28_PAD_LCD_D00__LCD_D0
721 MX28_PAD_LCD_D01__LCD_D1
722 MX28_PAD_LCD_D02__LCD_D2
723 MX28_PAD_LCD_D03__LCD_D3
724 MX28_PAD_LCD_D04__LCD_D4
725 MX28_PAD_LCD_D05__LCD_D5
726 MX28_PAD_LCD_D06__LCD_D6
727 MX28_PAD_LCD_D07__LCD_D7
728 MX28_PAD_LCD_D08__LCD_D8
729 MX28_PAD_LCD_D09__LCD_D9
730 MX28_PAD_LCD_D10__LCD_D10
731 MX28_PAD_LCD_D11__LCD_D11
732 MX28_PAD_LCD_D12__LCD_D12
733 MX28_PAD_LCD_D13__LCD_D13
734 MX28_PAD_LCD_D14__LCD_D14
735 MX28_PAD_LCD_D15__LCD_D15
736 MX28_PAD_LCD_D16__LCD_D16
737 MX28_PAD_LCD_D17__LCD_D17
738 >;
739 fsl,drive-strength = <MXS_DRIVE_4mA>;
740 fsl,voltage = <MXS_VOLTAGE_HIGH>;
741 fsl,pull-up = <MXS_PULL_DISABLE>;
742 };
744 lcdif_16bit_pins_a: lcdif-16bit@0 {
745 reg = <0>;
746 fsl,pinmux-ids = <
747 MX28_PAD_LCD_D00__LCD_D0
748 MX28_PAD_LCD_D01__LCD_D1
749 MX28_PAD_LCD_D02__LCD_D2
750 MX28_PAD_LCD_D03__LCD_D3
751 MX28_PAD_LCD_D04__LCD_D4
752 MX28_PAD_LCD_D05__LCD_D5
753 MX28_PAD_LCD_D06__LCD_D6
754 MX28_PAD_LCD_D07__LCD_D7
755 MX28_PAD_LCD_D08__LCD_D8
756 MX28_PAD_LCD_D09__LCD_D9
757 MX28_PAD_LCD_D10__LCD_D10
758 MX28_PAD_LCD_D11__LCD_D11
759 MX28_PAD_LCD_D12__LCD_D12
760 MX28_PAD_LCD_D13__LCD_D13
761 MX28_PAD_LCD_D14__LCD_D14
762 MX28_PAD_LCD_D15__LCD_D15
763 >;
764 fsl,drive-strength = <MXS_DRIVE_4mA>;
765 fsl,voltage = <MXS_VOLTAGE_HIGH>;
766 fsl,pull-up = <MXS_PULL_DISABLE>;
767 };
769 lcdif_sync_pins_a: lcdif-sync@0 {
770 reg = <0>;
771 fsl,pinmux-ids = <
772 MX28_PAD_LCD_RS__LCD_DOTCLK
773 MX28_PAD_LCD_CS__LCD_ENABLE
774 MX28_PAD_LCD_RD_E__LCD_VSYNC
775 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
776 >;
777 fsl,drive-strength = <MXS_DRIVE_4mA>;
778 fsl,voltage = <MXS_VOLTAGE_HIGH>;
779 fsl,pull-up = <MXS_PULL_DISABLE>;
780 };
782 can0_pins_a: can0@0 {
783 reg = <0>;
784 fsl,pinmux-ids = <
785 MX28_PAD_GPMI_RDY2__CAN0_TX
786 MX28_PAD_GPMI_RDY3__CAN0_RX
787 >;
788 fsl,drive-strength = <MXS_DRIVE_4mA>;
789 fsl,voltage = <MXS_VOLTAGE_HIGH>;
790 fsl,pull-up = <MXS_PULL_DISABLE>;
791 };
793 can1_pins_a: can1@0 {
794 reg = <0>;
795 fsl,pinmux-ids = <
796 MX28_PAD_GPMI_CE2N__CAN1_TX
797 MX28_PAD_GPMI_CE3N__CAN1_RX
798 >;
799 fsl,drive-strength = <MXS_DRIVE_4mA>;
800 fsl,voltage = <MXS_VOLTAGE_HIGH>;
801 fsl,pull-up = <MXS_PULL_DISABLE>;
802 };
804 spi2_pins_a: spi2@0 {
805 reg = <0>;
806 fsl,pinmux-ids = <
807 MX28_PAD_SSP2_SCK__SSP2_SCK
808 MX28_PAD_SSP2_MOSI__SSP2_CMD
809 MX28_PAD_SSP2_MISO__SSP2_D0
810 MX28_PAD_SSP2_SS0__SSP2_D3
811 >;
812 fsl,drive-strength = <MXS_DRIVE_8mA>;
813 fsl,voltage = <MXS_VOLTAGE_HIGH>;
814 fsl,pull-up = <MXS_PULL_ENABLE>;
815 };
817 spi3_pins_a: spi3@0 {
818 reg = <0>;
819 fsl,pinmux-ids = <
820 MX28_PAD_AUART2_RX__SSP3_D4
821 MX28_PAD_AUART2_TX__SSP3_D5
822 MX28_PAD_SSP3_SCK__SSP3_SCK
823 MX28_PAD_SSP3_MOSI__SSP3_CMD
824 MX28_PAD_SSP3_MISO__SSP3_D0
825 MX28_PAD_SSP3_SS0__SSP3_D3
826 >;
827 fsl,drive-strength = <MXS_DRIVE_8mA>;
828 fsl,voltage = <MXS_VOLTAGE_HIGH>;
829 fsl,pull-up = <MXS_PULL_DISABLE>;
830 };
832 spi3_pins_b: spi3@1 {
833 reg = <1>;
834 fsl,pinmux-ids = <
835 MX28_PAD_SSP3_SCK__SSP3_SCK
836 MX28_PAD_SSP3_MOSI__SSP3_CMD
837 MX28_PAD_SSP3_MISO__SSP3_D0
838 MX28_PAD_SSP3_SS0__SSP3_D3
839 >;
840 fsl,drive-strength = <MXS_DRIVE_8mA>;
841 fsl,voltage = <MXS_VOLTAGE_HIGH>;
842 fsl,pull-up = <MXS_PULL_ENABLE>;
843 };
845 usb0_pins_a: usb0@0 {
846 reg = <0>;
847 fsl,pinmux-ids = <
848 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
849 >;
850 fsl,drive-strength = <MXS_DRIVE_12mA>;
851 fsl,voltage = <MXS_VOLTAGE_HIGH>;
852 fsl,pull-up = <MXS_PULL_DISABLE>;
853 };
855 usb0_pins_b: usb0@1 {
856 reg = <1>;
857 fsl,pinmux-ids = <
858 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
859 >;
860 fsl,drive-strength = <MXS_DRIVE_12mA>;
861 fsl,voltage = <MXS_VOLTAGE_HIGH>;
862 fsl,pull-up = <MXS_PULL_DISABLE>;
863 };
865 usb1_pins_a: usb1@0 {
866 reg = <0>;
867 fsl,pinmux-ids = <
868 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
869 >;
870 fsl,drive-strength = <MXS_DRIVE_12mA>;
871 fsl,voltage = <MXS_VOLTAGE_HIGH>;
872 fsl,pull-up = <MXS_PULL_DISABLE>;
873 };
875 usb0_id_pins_a: usb0id@0 {
876 reg = <0>;
877 fsl,pinmux-ids = <
878 MX28_PAD_AUART1_RTS__USB0_ID
879 >;
880 fsl,drive-strength = <MXS_DRIVE_12mA>;
881 fsl,voltage = <MXS_VOLTAGE_HIGH>;
882 fsl,pull-up = <MXS_PULL_ENABLE>;
883 };
885 usb0_id_pins_b: usb0id1@0 {
886 reg = <0>;
887 fsl,pinmux-ids = <
888 MX28_PAD_PWM2__USB0_ID
889 >;
890 fsl,drive-strength = <MXS_DRIVE_12mA>;
891 fsl,voltage = <MXS_VOLTAGE_HIGH>;
892 fsl,pull-up = <MXS_PULL_ENABLE>;
893 };
895 };
897 digctl: digctl@8001c000 {
898 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
899 reg = <0x8001c000 0x2000>;
900 interrupts = <89>;
901 status = "disabled";
902 };
904 etm: etm@80022000 {
905 reg = <0x80022000 0x2000>;
906 status = "disabled";
907 };
909 dma_apbx: dma-apbx@80024000 {
910 compatible = "fsl,imx28-dma-apbx";
911 reg = <0x80024000 0x2000>;
912 interrupts = <78 79 66 0
913 80 81 68 69
914 70 71 72 73
915 74 75 76 77>;
916 interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
917 "saif0", "saif1", "i2c0", "i2c1",
918 "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
919 "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
920 #dma-cells = <1>;
921 dma-channels = <16>;
922 clocks = <&clks 26>;
923 };
925 dcp: dcp@80028000 {
926 compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
927 reg = <0x80028000 0x2000>;
928 interrupts = <52 53 54>;
929 status = "okay";
930 };
932 pxp: pxp@8002a000 {
933 reg = <0x8002a000 0x2000>;
934 interrupts = <39>;
935 status = "disabled";
936 };
938 ocotp: ocotp@8002c000 {
939 compatible = "fsl,imx28-ocotp", "fsl,ocotp";
940 #address-cells = <1>;
941 #size-cells = <1>;
942 reg = <0x8002c000 0x2000>;
943 clocks = <&clks 25>;
944 };
946 axi-ahb@8002e000 {
947 reg = <0x8002e000 0x2000>;
948 status = "disabled";
949 };
951 lcdif: lcdif@80030000 {
952 compatible = "fsl,imx28-lcdif";
953 reg = <0x80030000 0x2000>;
954 interrupts = <38>;
955 clocks = <&clks 55>;
956 dmas = <&dma_apbh 13>;
957 dma-names = "rx";
958 status = "disabled";
959 };
961 can0: can@80032000 {
962 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
963 reg = <0x80032000 0x2000>;
964 interrupts = <8>;
965 clocks = <&clks 58>, <&clks 58>;
966 clock-names = "ipg", "per";
967 status = "disabled";
968 };
970 can1: can@80034000 {
971 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
972 reg = <0x80034000 0x2000>;
973 interrupts = <9>;
974 clocks = <&clks 59>, <&clks 59>;
975 clock-names = "ipg", "per";
976 status = "disabled";
977 };
979 simdbg: simdbg@8003c000 {
980 reg = <0x8003c000 0x200>;
981 status = "disabled";
982 };
984 simgpmisel: simgpmisel@8003c200 {
985 reg = <0x8003c200 0x100>;
986 status = "disabled";
987 };
989 simsspsel: simsspsel@8003c300 {
990 reg = <0x8003c300 0x100>;
991 status = "disabled";
992 };
994 simmemsel: simmemsel@8003c400 {
995 reg = <0x8003c400 0x100>;
996 status = "disabled";
997 };
999 gpiomon: gpiomon@8003c500 {
1000 reg = <0x8003c500 0x100>;
1001 status = "disabled";
1002 };
1004 simenet: simenet@8003c700 {
1005 reg = <0x8003c700 0x100>;
1006 status = "disabled";
1007 };
1009 armjtag: armjtag@8003c800 {
1010 reg = <0x8003c800 0x100>;
1011 status = "disabled";
1012 };
1013 };
1015 apbx@80040000 {
1016 compatible = "simple-bus";
1017 #address-cells = <1>;
1018 #size-cells = <1>;
1019 reg = <0x80040000 0x40000>;
1020 ranges;
1022 clks: clkctrl@80040000 {
1023 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
1024 reg = <0x80040000 0x2000>;
1025 #clock-cells = <1>;
1026 };
1028 saif0: saif@80042000 {
1029 compatible = "fsl,imx28-saif";
1030 reg = <0x80042000 0x2000>;
1031 interrupts = <59>;
1032 #clock-cells = <0>;
1033 clocks = <&clks 53>;
1034 dmas = <&dma_apbx 4>;
1035 dma-names = "rx-tx";
1036 status = "disabled";
1037 };
1039 power: power@80044000 {
1040 reg = <0x80044000 0x2000>;
1041 status = "disabled";
1042 };
1044 saif1: saif@80046000 {
1045 compatible = "fsl,imx28-saif";
1046 reg = <0x80046000 0x2000>;
1047 interrupts = <58>;
1048 clocks = <&clks 54>;
1049 dmas = <&dma_apbx 5>;
1050 dma-names = "rx-tx";
1051 status = "disabled";
1052 };
1054 lradc: lradc@80050000 {
1055 compatible = "fsl,imx28-lradc";
1056 reg = <0x80050000 0x2000>;
1057 interrupts = <10 14 15 16 17 18 19
1058 20 21 22 23 24 25>;
1059 status = "disabled";
1060 clocks = <&clks 41>;
1061 #io-channel-cells = <1>;
1062 };
1064 spdif: spdif@80054000 {
1065 reg = <0x80054000 0x2000>;
1066 interrupts = <45>;
1067 dmas = <&dma_apbx 2>;
1068 dma-names = "tx";
1069 status = "disabled";
1070 };
1072 mxs_rtc: rtc@80056000 {
1073 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1074 reg = <0x80056000 0x2000>;
1075 interrupts = <29>;
1076 };
1078 i2c0: i2c@80058000 {
1079 #address-cells = <1>;
1080 #size-cells = <0>;
1081 compatible = "fsl,imx28-i2c";
1082 reg = <0x80058000 0x2000>;
1083 interrupts = <111>;
1084 clock-frequency = <100000>;
1085 dmas = <&dma_apbx 6>;
1086 dma-names = "rx-tx";
1087 status = "disabled";
1088 };
1090 i2c1: i2c@8005a000 {
1091 #address-cells = <1>;
1092 #size-cells = <0>;
1093 compatible = "fsl,imx28-i2c";
1094 reg = <0x8005a000 0x2000>;
1095 interrupts = <110>;
1096 clock-frequency = <100000>;
1097 dmas = <&dma_apbx 7>;
1098 dma-names = "rx-tx";
1099 status = "disabled";
1100 };
1102 pwm: pwm@80064000 {
1103 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1104 reg = <0x80064000 0x2000>;
1105 clocks = <&clks 44>;
1106 #pwm-cells = <2>;
1107 fsl,pwm-number = <8>;
1108 status = "disabled";
1109 };
1111 timer: timrot@80068000 {
1112 compatible = "fsl,imx28-timrot", "fsl,timrot";
1113 reg = <0x80068000 0x2000>;
1114 interrupts = <48 49 50 51>;
1115 clocks = <&clks 26>;
1116 };
1118 auart0: serial@8006a000 {
1119 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1120 reg = <0x8006a000 0x2000>;
1121 interrupts = <112>;
1122 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1123 dma-names = "rx", "tx";
1124 clocks = <&clks 45>;
1125 status = "disabled";
1126 };
1128 auart1: serial@8006c000 {
1129 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1130 reg = <0x8006c000 0x2000>;
1131 interrupts = <113>;
1132 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1133 dma-names = "rx", "tx";
1134 clocks = <&clks 45>;
1135 status = "disabled";
1136 };
1138 auart2: serial@8006e000 {
1139 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1140 reg = <0x8006e000 0x2000>;
1141 interrupts = <114>;
1142 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1143 dma-names = "rx", "tx";
1144 clocks = <&clks 45>;
1145 status = "disabled";
1146 };
1148 auart3: serial@80070000 {
1149 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1150 reg = <0x80070000 0x2000>;
1151 interrupts = <115>;
1152 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1153 dma-names = "rx", "tx";
1154 clocks = <&clks 45>;
1155 status = "disabled";
1156 };
1158 auart4: serial@80072000 {
1159 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1160 reg = <0x80072000 0x2000>;
1161 interrupts = <116>;
1162 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1163 dma-names = "rx", "tx";
1164 clocks = <&clks 45>;
1165 status = "disabled";
1166 };
1168 duart: serial@80074000 {
1169 compatible = "arm,pl011", "arm,primecell";
1170 reg = <0x80074000 0x1000>;
1171 interrupts = <47>;
1172 clocks = <&clks 45>, <&clks 26>;
1173 clock-names = "uart", "apb_pclk";
1174 status = "disabled";
1175 };
1177 usbphy0: usbphy@8007c000 {
1178 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1179 reg = <0x8007c000 0x2000>;
1180 clocks = <&clks 62>;
1181 status = "disabled";
1182 };
1184 usbphy1: usbphy@8007e000 {
1185 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1186 reg = <0x8007e000 0x2000>;
1187 clocks = <&clks 63>;
1188 status = "disabled";
1189 };
1190 };
1191 };
1193 ahb@80080000 {
1194 compatible = "simple-bus";
1195 #address-cells = <1>;
1196 #size-cells = <1>;
1197 reg = <0x80080000 0x80000>;
1198 ranges;
1200 usb0: usb@80080000 {
1201 compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1202 reg = <0x80080000 0x10000>;
1203 interrupts = <93>;
1204 clocks = <&clks 60>;
1205 fsl,usbphy = <&usbphy0>;
1206 status = "disabled";
1207 };
1209 usb1: usb@80090000 {
1210 compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1211 reg = <0x80090000 0x10000>;
1212 interrupts = <92>;
1213 clocks = <&clks 61>;
1214 fsl,usbphy = <&usbphy1>;
1215 dr_mode = "host";
1216 status = "disabled";
1217 };
1219 dflpt: dflpt@800c0000 {
1220 reg = <0x800c0000 0x10000>;
1221 status = "disabled";
1222 };
1224 mac0: ethernet@800f0000 {
1225 compatible = "fsl,imx28-fec";
1226 reg = <0x800f0000 0x4000>;
1227 interrupts = <101>;
1228 clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1229 clock-names = "ipg", "ahb", "enet_out";
1230 status = "disabled";
1231 };
1233 mac1: ethernet@800f4000 {
1234 compatible = "fsl,imx28-fec";
1235 reg = <0x800f4000 0x4000>;
1236 interrupts = <102>;
1237 clocks = <&clks 57>, <&clks 57>;
1238 clock-names = "ipg", "ahb";
1239 status = "disabled";
1240 };
1242 etn_switch: switch@800f8000 {
1243 reg = <0x800f8000 0x8000>;
1244 status = "disabled";
1245 };
1246 };
1248 iio_hwmon {
1249 compatible = "iio-hwmon";
1250 io-channels = <&lradc 8>;
1251 };
1252 };