mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
[linux/fpc-iii.git] / arch / arm / boot / dts / ls1021a-qds.dts
blob0521e6864cb7fdc92dd7a7731f4553e836ebfdea
1 /*
2  * Copyright 2013-2014 Freescale Semiconductor, Inc.
3  *
4  * This file is dual-licensed: you can use it either under the terms
5  * of the GPL or the X11 license, at your option. Note that this dual
6  * licensing only applies to this file, and not this project as a
7  * whole.
8  *
9  *  a) This file is free software; you can redistribute it and/or
10  *     modify it under the terms of the GNU General Public License as
11  *     published by the Free Software Foundation; either version 2 of
12  *     the License, or (at your option) any later version.
13  *
14  *     This file is distributed in the hope that it will be useful,
15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  *     GNU General Public License for more details.
18  *
19  *     You should have received a copy of the GNU General Public
20  *     License along with this file; if not, write to the Free
21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22  *     MA 02110-1301 USA
23  *
24  * Or, alternatively,
25  *
26  *  b) Permission is hereby granted, free of charge, to any person
27  *     obtaining a copy of this software and associated documentation
28  *     files (the "Software"), to deal in the Software without
29  *     restriction, including without limitation the rights to use,
30  *     copy, modify, merge, publish, distribute, sublicense, and/or
31  *     sell copies of the Software, and to permit persons to whom the
32  *     Software is furnished to do so, subject to the following
33  *     conditions:
34  *
35  *     The above copyright notice and this permission notice shall be
36  *     included in all copies or substantial portions of the Software.
37  *
38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45  *     OTHER DEALINGS IN THE SOFTWARE.
46  */
48 /dts-v1/;
49 #include "ls1021a.dtsi"
51 / {
52         model = "LS1021A QDS Board";
54         aliases {
55                 enet0_rgmii_phy = &rgmii_phy1;
56                 enet1_rgmii_phy = &rgmii_phy2;
57                 enet2_rgmii_phy = &rgmii_phy3;
58                 enet0_sgmii_phy = &sgmii_phy1c;
59                 enet1_sgmii_phy = &sgmii_phy1d;
60         };
62         sys_mclk: clock-mclk {
63                 compatible = "fixed-clock";
64                 #clock-cells = <0>;
65                 clock-frequency = <24576000>;
66         };
68         regulators {
69                 compatible = "simple-bus";
70                 #address-cells = <1>;
71                 #size-cells = <0>;
73                 reg_3p3v: regulator@0 {
74                         compatible = "regulator-fixed";
75                         reg = <0>;
76                         regulator-name = "3P3V";
77                         regulator-min-microvolt = <3300000>;
78                         regulator-max-microvolt = <3300000>;
79                         regulator-always-on;
80                 };
81         };
83         sound {
84                 compatible = "simple-audio-card";
85                 simple-audio-card,format = "i2s";
86                 simple-audio-card,widgets =
87                         "Microphone", "Microphone Jack",
88                         "Headphone", "Headphone Jack",
89                         "Speaker", "Speaker Ext",
90                         "Line", "Line In Jack";
91                 simple-audio-card,routing =
92                         "MIC_IN", "Microphone Jack",
93                         "Microphone Jack", "Mic Bias",
94                         "LINE_IN", "Line In Jack",
95                         "Headphone Jack", "HP_OUT",
96                         "Speaker Ext", "LINE_OUT";
98                 simple-audio-card,cpu {
99                         sound-dai = <&sai2>;
100                         frame-master;
101                         bitclock-master;
102                 };
104                 simple-audio-card,codec {
105                         sound-dai = <&codec>;
106                         frame-master;
107                         bitclock-master;
108                 };
109         };
112 &dspi0 {
113         bus-num = <0>;
114         status = "okay";
116         dspiflash: at45db021d@0 {
117                 #address-cells = <1>;
118                 #size-cells = <1>;
119                 compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
120                 spi-max-frequency = <16000000>;
121                 spi-cpol;
122                 spi-cpha;
123                 reg = <0>;
124         };
127 &enet0 {
128         tbi-handle = <&tbi0>;
129         phy-handle = <&sgmii_phy1c>;
130         phy-connection-type = "sgmii";
131         status = "okay";
134 &enet1 {
135         tbi-handle = <&tbi0>;
136         phy-handle = <&sgmii_phy1d>;
137         phy-connection-type = "sgmii";
138         status = "okay";
141 &enet2 {
142         phy-handle = <&rgmii_phy3>;
143         phy-connection-type = "rgmii-id";
144         status = "okay";
147 &i2c0 {
148         status = "okay";
150         pca9547: mux@77 {
151                 compatible = "nxp,pca9547";
152                 reg = <0x77>;
153                 #address-cells = <1>;
154                 #size-cells = <0>;
156                 i2c@0 {
157                         #address-cells = <1>;
158                         #size-cells = <0>;
159                         reg = <0x0>;
161                         ds3232: rtc@68 {
162                                 compatible = "dallas,ds3232";
163                                 reg = <0x68>;
164                                 interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
165                         };
166                 };
168                 i2c@2 {
169                         #address-cells = <1>;
170                         #size-cells = <0>;
171                         reg = <0x2>;
173                         ina220@40 {
174                                 compatible = "ti,ina220";
175                                 reg = <0x40>;
176                                 shunt-resistor = <1000>;
177                         };
179                         ina220@41 {
180                                 compatible = "ti,ina220";
181                                 reg = <0x41>;
182                                 shunt-resistor = <1000>;
183                         };
184                 };
186                 i2c@3 {
187                         #address-cells = <1>;
188                         #size-cells = <0>;
189                         reg = <0x3>;
191                         eeprom@56 {
192                                 compatible = "atmel,24c512";
193                                 reg = <0x56>;
194                         };
196                         eeprom@57 {
197                                 compatible = "atmel,24c512";
198                                 reg = <0x57>;
199                         };
201                         adt7461a@4c {
202                                 compatible = "adi,adt7461a";
203                                 reg = <0x4c>;
204                         };
205                 };
207                 i2c@4 {
208                         #address-cells = <1>;
209                         #size-cells = <0>;
210                         reg = <0x4>;
212                         codec: sgtl5000@2a {
213                                 #sound-dai-cells = <0>;
214                                 compatible = "fsl,sgtl5000";
215                                 reg = <0x2a>;
216                                 VDDA-supply = <&reg_3p3v>;
217                                 VDDIO-supply = <&reg_3p3v>;
218                                 clocks = <&sys_mclk 1>;
219                         };
220                 };
221         };
224 &ifc {
225         #address-cells = <2>;
226         #size-cells = <1>;
227         /* NOR, NAND Flashes and FPGA on board */
228         ranges = <0x0 0x0 0x0 0x60000000 0x08000000
229                   0x2 0x0 0x0 0x7e800000 0x00010000
230                   0x3 0x0 0x0 0x7fb00000 0x00000100>;
231         status = "okay";
233         nor@0,0 {
234                 #address-cells = <1>;
235                 #size-cells = <1>;
236                 compatible = "cfi-flash";
237                 reg = <0x0 0x0 0x8000000>;
238                 bank-width = <2>;
239                 device-width = <1>;
240         };
242         fpga: board-control@3,0 {
243                 #address-cells = <1>;
244                 #size-cells = <1>;
245                 compatible = "simple-bus";
246                 reg = <0x3 0x0 0x0000100>;
247                 bank-width = <1>;
248                 device-width = <1>;
249                 ranges = <0 3 0 0x100>;
251                 mdio-mux-emi1 {
252                         compatible = "mdio-mux-mmioreg";
253                         mdio-parent-bus = <&mdio0>;
254                         #address-cells = <1>;
255                         #size-cells = <0>;
256                         reg = <0x54 1>; /* BRDCFG4 */
257                         mux-mask = <0xe0>; /* EMI1[2:0] */
259                         /* Onboard PHYs */
260                         ls1021amdio0: mdio@0 {
261                                 reg = <0>;
262                                 #address-cells = <1>;
263                                 #size-cells = <0>;
264                                 rgmii_phy1: ethernet-phy@1 {
265                                         reg = <0x1>;
266                                 };
267                         };
269                         ls1021amdio1: mdio@20 {
270                                 reg = <0x20>;
271                                 #address-cells = <1>;
272                                 #size-cells = <0>;
273                                 rgmii_phy2: ethernet-phy@2 {
274                                         reg = <0x2>;
275                                 };
276                         };
278                         ls1021amdio2: mdio@40 {
279                                 reg = <0x40>;
280                                 #address-cells = <1>;
281                                 #size-cells = <0>;
282                                 rgmii_phy3: ethernet-phy@3 {
283                                         reg = <0x3>;
284                                 };
285                         };
287                         ls1021amdio3: mdio@60 {
288                                 reg = <0x60>;
289                                 #address-cells = <1>;
290                                 #size-cells = <0>;
291                                 sgmii_phy1c: ethernet-phy@1c {
292                                         reg = <0x1c>;
293                                 };
294                         };
296                         ls1021amdio4: mdio@80 {
297                                 reg = <0x80>;
298                                 #address-cells = <1>;
299                                 #size-cells = <0>;
300                                 sgmii_phy1d: ethernet-phy@1d {
301                                         reg = <0x1d>;
302                                 };
303                         };
304                 };
305         };
308 &lpuart0 {
309         status = "okay";
312 &mdio0 {
313         tbi0: tbi-phy@8 {
314                 reg = <0x8>;
315                 device_type = "tbi-phy";
316         };
319 &sai2 {
320         status = "okay";
323 &uart0 {
324         status = "okay";
327 &uart1 {
328         status = "okay";