?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
JBD: round commit timer up to avoid uncommitted transaction
[linux/fpc-iii.git] / drivers / net / hamradio / baycom_epp.c
blob7bcaf7c66243af20bc87c88d6fe0251492142d6e
1 /*****************************************************************************/
2
3 /*
4 * baycom_epp.c -- baycom epp radio modem driver.
5 *
6 * Copyright (C) 1998-2000
7 * Thomas Sailer (sailer@ife.ee.ethz.ch)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 *
23 * Please note that the GPL allows you to use the driver, NOT the radio.
24 * In order to use the radio, you need a license from the communications
25 * authority of your country.
26 *
27 *
28 * History:
29 * 0.1 xx.xx.1998 Initial version by Matthias Welwarsky (dg2fef)
30 * 0.2 21.04.1998 Massive rework by Thomas Sailer
31 * Integrated FPGA EPP modem configuration routines
32 * 0.3 11.05.1998 Took FPGA config out and moved it into a separate program
33 * 0.4 26.07.1999 Adapted to new lowlevel parport driver interface
34 * 0.5 03.08.1999 adapt to Linus' new __setup/__initcall
35 * removed some pre-2.2 kernel compatibility cruft
36 * 0.6 10.08.1999 Check if parport can do SPP and is safe to access during interrupt contexts
37 * 0.7 12.02.2000 adapted to softnet driver interface
38 *
39 */
40
41 /*****************************************************************************/
42
43 #include <linux/crc-ccitt.h>
44 #include <linux/module.h>
45 #include <linux/kernel.h>
46 #include <linux/init.h>
47 #include <linux/string.h>
48 #include <linux/workqueue.h>
49 #include <linux/fs.h>
50 #include <linux/parport.h>
51 #include <linux/if_arp.h>
52 #include <linux/hdlcdrv.h>
53 #include <linux/baycom.h>
54 #include <linux/jiffies.h>
55 #include <linux/random.h>
56 #include <net/ax25.h>
57 #include <asm/uaccess.h>
58
59 /* --------------------------------------------------------------------- */
60
61 #define BAYCOM_DEBUG
62 #define BAYCOM_MAGIC 19730510
63
64 /* --------------------------------------------------------------------- */
65
66 static const char paranoia_str[] = KERN_ERR
67 "baycom_epp: bad magic number for hdlcdrv_state struct in routine %s\n";
68
69 static const char bc_drvname[] = "baycom_epp";
70 static const char bc_drvinfo[] = KERN_INFO "baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA\n"
71 "baycom_epp: version 0.7 compiled " __TIME__ " " __DATE__ "\n";
72
73 /* --------------------------------------------------------------------- */
74
75 #define NR_PORTS 4
76
77 static struct net_device *baycom_device[NR_PORTS];
78
79 /* --------------------------------------------------------------------- */
80
81 /* EPP status register */
82 #define EPP_DCDBIT 0x80
83 #define EPP_PTTBIT 0x08
84 #define EPP_NREF 0x01
85 #define EPP_NRAEF 0x02
86 #define EPP_NRHF 0x04
87 #define EPP_NTHF 0x20
88 #define EPP_NTAEF 0x10
89 #define EPP_NTEF EPP_PTTBIT
90
91 /* EPP control register */
92 #define EPP_TX_FIFO_ENABLE 0x10
93 #define EPP_RX_FIFO_ENABLE 0x08
94 #define EPP_MODEM_ENABLE 0x20
95 #define EPP_LEDS 0xC0
96 #define EPP_IRQ_ENABLE 0x10
97
98 /* LPT registers */
99 #define LPTREG_ECONTROL 0x402
100 #define LPTREG_CONFIGB 0x401
101 #define LPTREG_CONFIGA 0x400
102 #define LPTREG_EPPDATA 0x004
103 #define LPTREG_EPPADDR 0x003
104 #define LPTREG_CONTROL 0x002
105 #define LPTREG_STATUS 0x001
106 #define LPTREG_DATA 0x000
107
108 /* LPT control register */
109 #define LPTCTRL_PROGRAM 0x04 /* 0 to reprogram */
110 #define LPTCTRL_WRITE 0x01
111 #define LPTCTRL_ADDRSTB 0x08
112 #define LPTCTRL_DATASTB 0x02
113 #define LPTCTRL_INTEN 0x10
114
115 /* LPT status register */
116 #define LPTSTAT_SHIFT_NINTR 6
117 #define LPTSTAT_WAIT 0x80
118 #define LPTSTAT_NINTR (1<<LPTSTAT_SHIFT_NINTR)
119 #define LPTSTAT_PE 0x20
120 #define LPTSTAT_DONE 0x10
121 #define LPTSTAT_NERROR 0x08
122 #define LPTSTAT_EPPTIMEOUT 0x01
123
124 /* LPT data register */
125 #define LPTDATA_SHIFT_TDI 0
126 #define LPTDATA_SHIFT_TMS 2
127 #define LPTDATA_TDI (1<<LPTDATA_SHIFT_TDI)
128 #define LPTDATA_TCK 0x02
129 #define LPTDATA_TMS (1<<LPTDATA_SHIFT_TMS)
130 #define LPTDATA_INITBIAS 0x80
131
132
133 /* EPP modem config/status bits */
134 #define EPP_DCDBIT 0x80
135 #define EPP_PTTBIT 0x08
136 #define EPP_RXEBIT 0x01
137 #define EPP_RXAEBIT 0x02
138 #define EPP_RXHFULL 0x04
139
140 #define EPP_NTHF 0x20
141 #define EPP_NTAEF 0x10
142 #define EPP_NTEF EPP_PTTBIT
143
144 #define EPP_TX_FIFO_ENABLE 0x10
145 #define EPP_RX_FIFO_ENABLE 0x08
146 #define EPP_MODEM_ENABLE 0x20
147 #define EPP_LEDS 0xC0
148 #define EPP_IRQ_ENABLE 0x10
149
150 /* Xilinx 4k JTAG instructions */
151 #define XC4K_IRLENGTH 3
152 #define XC4K_EXTEST 0
153 #define XC4K_PRELOAD 1
154 #define XC4K_CONFIGURE 5
155 #define XC4K_BYPASS 7
156
157 #define EPP_CONVENTIONAL 0
158 #define EPP_FPGA 1
159 #define EPP_FPGAEXTSTATUS 2
160
161 #define TXBUFFER_SIZE ((HDLCDRV_MAXFLEN*6/5)+8)
162
163 /* ---------------------------------------------------------------------- */
164 /*
165 * Information that need to be kept for each board.
166 */
167
168 struct baycom_state {
169 int magic;
170
171 struct pardevice *pdev;
172 struct net_device *dev;
173 unsigned int work_running;
174 struct delayed_work run_work;
175 unsigned int modem;
176 unsigned int bitrate;
177 unsigned char stat;
178
179 struct {
180 unsigned int intclk;
181 unsigned int fclk;
182 unsigned int bps;
183 unsigned int extmodem;
184 unsigned int loopback;
185 } cfg;
186
187 struct hdlcdrv_channel_params ch_params;
188
189 struct {
190 unsigned int bitbuf, bitstream, numbits, state;
191 unsigned char *bufptr;
192 int bufcnt;
193 unsigned char buf[TXBUFFER_SIZE];
194 } hdlcrx;
195
196 struct {
197 int calibrate;
198 int slotcnt;
199 int flags;
200 enum { tx_idle = 0, tx_keyup, tx_data, tx_tail } state;
201 unsigned char *bufptr;
202 int bufcnt;
203 unsigned char buf[TXBUFFER_SIZE];
204 } hdlctx;
205
206 unsigned int ptt_keyed;
207 struct sk_buff *skb; /* next transmit packet */
208
209 #ifdef BAYCOM_DEBUG
210 struct debug_vals {
211 unsigned long last_jiffies;
212 unsigned cur_intcnt;
213 unsigned last_intcnt;
214 int cur_pllcorr;
215 int last_pllcorr;
216 unsigned int mod_cycles;
217 unsigned int demod_cycles;
218 } debug_vals;
219 #endif /* BAYCOM_DEBUG */
220 };
221
222 /* --------------------------------------------------------------------- */
223
224 #define KISS_VERBOSE
225
226 /* --------------------------------------------------------------------- */
227
228 #define PARAM_TXDELAY 1
229 #define PARAM_PERSIST 2
230 #define PARAM_SLOTTIME 3
231 #define PARAM_TXTAIL 4
232 #define PARAM_FULLDUP 5
233 #define PARAM_HARDWARE 6
234 #define PARAM_RETURN 255
235
236 /* --------------------------------------------------------------------- */
237 /*
238 * the CRC routines are stolen from WAMPES
239 * by Dieter Deyke
240 */
241
242
243 /*---------------------------------------------------------------------------*/
244
245 #if 0
246 static inline void append_crc_ccitt(unsigned char *buffer, int len)
247 {
248 unsigned int crc = 0xffff;
249
250 for (;len>0;len--)
251 crc = (crc >> 8) ^ crc_ccitt_table[(crc ^ *buffer++) & 0xff];
252 crc ^= 0xffff;
253 *buffer++ = crc;
254 *buffer++ = crc >> 8;
255 }
256 #endif
257
258 /*---------------------------------------------------------------------------*/
259
260 static inline int check_crc_ccitt(const unsigned char *buf, int cnt)
261 {
262 return (crc_ccitt(0xffff, buf, cnt) & 0xffff) == 0xf0b8;
263 }
264
265 /*---------------------------------------------------------------------------*/
266
267 static inline int calc_crc_ccitt(const unsigned char *buf, int cnt)
268 {
269 return (crc_ccitt(0xffff, buf, cnt) ^ 0xffff) & 0xffff;
270 }
271
272 /* ---------------------------------------------------------------------- */
273
274 #define tenms_to_flags(bc,tenms) ((tenms * bc->bitrate) / 800)
275
276 /* --------------------------------------------------------------------- */
277
278 static inline void baycom_int_freq(struct baycom_state *bc)
279 {
280 #ifdef BAYCOM_DEBUG
281 unsigned long cur_jiffies = jiffies;
282 /*
283 * measure the interrupt frequency
284 */
285 bc->debug_vals.cur_intcnt++;
286 if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
287 bc->debug_vals.last_jiffies = cur_jiffies;
288 bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
289 bc->debug_vals.cur_intcnt = 0;
290 bc->debug_vals.last_pllcorr = bc->debug_vals.cur_pllcorr;
291 bc->debug_vals.cur_pllcorr = 0;
292 }
293 #endif /* BAYCOM_DEBUG */
294 }
295
296 /* ---------------------------------------------------------------------- */
297 /*
298 * eppconfig_path should be setable via /proc/sys.
299 */
300
301 static char eppconfig_path[256] = "/usr/sbin/eppfpga";
302
303 static char *envp[] = { "HOME=/", "TERM=linux", "PATH=/usr/bin:/bin", NULL };
304
305 /* eppconfig: called during ifconfig up to configure the modem */
306 static int eppconfig(struct baycom_state *bc)
307 {
308 char modearg[256];
309 char portarg[16];
310 char *argv[] = { eppconfig_path, "-s", "-p", portarg, "-m", modearg,
311 NULL };
312
313 /* set up arguments */
314 sprintf(modearg, "%sclk,%smodem,fclk=%d,bps=%d,divider=%d%s,extstat",
315 bc->cfg.intclk ? "int" : "ext",
316 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
317 (bc->cfg.fclk + 8 * bc->cfg.bps) / (16 * bc->cfg.bps),
318 bc->cfg.loopback ? ",loopback" : "");
319 sprintf(portarg, "%ld", bc->pdev->port->base);
320 printk(KERN_DEBUG "%s: %s -s -p %s -m %s\n", bc_drvname, eppconfig_path, portarg, modearg);
321
322 return call_usermodehelper(eppconfig_path, argv, envp, UMH_WAIT_PROC);
323 }
324
325 /* ---------------------------------------------------------------------- */
326
327 static inline void do_kiss_params(struct baycom_state *bc,
328 unsigned char *data, unsigned long len)
329 {
330
331 #ifdef KISS_VERBOSE
332 #define PKP(a,b) printk(KERN_INFO "baycomm_epp: channel params: " a "\n", b)
333 #else /* KISS_VERBOSE */
334 #define PKP(a,b)
335 #endif /* KISS_VERBOSE */
336
337 if (len < 2)
338 return;
339 switch(data[0]) {
340 case PARAM_TXDELAY:
341 bc->ch_params.tx_delay = data[1];
342 PKP("TX delay = %ums", 10 * bc->ch_params.tx_delay);
343 break;
344 case PARAM_PERSIST:
345 bc->ch_params.ppersist = data[1];
346 PKP("p persistence = %u", bc->ch_params.ppersist);
347 break;
348 case PARAM_SLOTTIME:
349 bc->ch_params.slottime = data[1];
350 PKP("slot time = %ums", bc->ch_params.slottime);
351 break;
352 case PARAM_TXTAIL:
353 bc->ch_params.tx_tail = data[1];
354 PKP("TX tail = %ums", bc->ch_params.tx_tail);
355 break;
356 case PARAM_FULLDUP:
357 bc->ch_params.fulldup = !!data[1];
358 PKP("%s duplex", bc->ch_params.fulldup ? "full" : "half");
359 break;
360 default:
361 break;
362 }
363 #undef PKP
364 }
365
366 /* --------------------------------------------------------------------- */
367
368 static void encode_hdlc(struct baycom_state *bc)
369 {
370 struct sk_buff *skb;
371 unsigned char *wp, *bp;
372 int pkt_len;
373 unsigned bitstream, notbitstream, bitbuf, numbit, crc;
374 unsigned char crcarr[2];
375 int j;
376
377 if (bc->hdlctx.bufcnt > 0)
378 return;
379 skb = bc->skb;
380 if (!skb)
381 return;
382 bc->skb = NULL;
383 pkt_len = skb->len-1; /* strip KISS byte */
384 wp = bc->hdlctx.buf;
385 bp = skb->data+1;
386 crc = calc_crc_ccitt(bp, pkt_len);
387 crcarr[0] = crc;
388 crcarr[1] = crc >> 8;
389 *wp++ = 0x7e;
390 bitstream = bitbuf = numbit = 0;
391 while (pkt_len > -2) {
392 bitstream >>= 8;
393 bitstream |= ((unsigned int)*bp) << 8;
394 bitbuf |= ((unsigned int)*bp) << numbit;
395 notbitstream = ~bitstream;
396 bp++;
397 pkt_len--;
398 if (!pkt_len)
399 bp = crcarr;
400 for (j = 0; j < 8; j++)
401 if (unlikely(!(notbitstream & (0x1f0 << j)))) {
402 bitstream &= ~(0x100 << j);
403 bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |
404 ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);
405 numbit++;
406 notbitstream = ~bitstream;
407 }
408 numbit += 8;
409 while (numbit >= 8) {
410 *wp++ = bitbuf;
411 bitbuf >>= 8;
412 numbit -= 8;
413 }
414 }
415 bitbuf |= 0x7e7e << numbit;
416 numbit += 16;
417 while (numbit >= 8) {
418 *wp++ = bitbuf;
419 bitbuf >>= 8;
420 numbit -= 8;
421 }
422 bc->hdlctx.bufptr = bc->hdlctx.buf;
423 bc->hdlctx.bufcnt = wp - bc->hdlctx.buf;
424 dev_kfree_skb(skb);
425 bc->dev->stats.tx_packets++;
426 }
427
428 /* ---------------------------------------------------------------------- */
429
430 static int transmit(struct baycom_state *bc, int cnt, unsigned char stat)
431 {
432 struct parport *pp = bc->pdev->port;
433 unsigned char tmp[128];
434 int i, j;
435
436 if (bc->hdlctx.state == tx_tail && !(stat & EPP_PTTBIT))
437 bc->hdlctx.state = tx_idle;
438 if (bc->hdlctx.state == tx_idle && bc->hdlctx.calibrate <= 0) {
439 if (bc->hdlctx.bufcnt <= 0)
440 encode_hdlc(bc);
441 if (bc->hdlctx.bufcnt <= 0)
442 return 0;
443 if (!bc->ch_params.fulldup) {
444 if (!(stat & EPP_DCDBIT)) {
445 bc->hdlctx.slotcnt = bc->ch_params.slottime;
446 return 0;
447 }
448 if ((--bc->hdlctx.slotcnt) > 0)
449 return 0;
450 bc->hdlctx.slotcnt = bc->ch_params.slottime;
451 if ((random32() % 256) > bc->ch_params.ppersist)
452 return 0;
453 }
454 }
455 if (bc->hdlctx.state == tx_idle && bc->hdlctx.bufcnt > 0) {
456 bc->hdlctx.state = tx_keyup;
457 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_delay);
458 bc->ptt_keyed++;
459 }
460 while (cnt > 0) {
461 switch (bc->hdlctx.state) {
462 case tx_keyup:
463 i = min_t(int, cnt, bc->hdlctx.flags);
464 cnt -= i;
465 bc->hdlctx.flags -= i;
466 if (bc->hdlctx.flags <= 0)
467 bc->hdlctx.state = tx_data;
468 memset(tmp, 0x7e, sizeof(tmp));
469 while (i > 0) {
470 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
471 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
472 return -1;
473 i -= j;
474 }
475 break;
476
477 case tx_data:
478 if (bc->hdlctx.bufcnt <= 0) {
479 encode_hdlc(bc);
480 if (bc->hdlctx.bufcnt <= 0) {
481 bc->hdlctx.state = tx_tail;
482 bc->hdlctx.flags = tenms_to_flags(bc, bc->ch_params.tx_tail);
483 break;
484 }
485 }
486 i = min_t(int, cnt, bc->hdlctx.bufcnt);
487 bc->hdlctx.bufcnt -= i;
488 cnt -= i;
489 if (i != pp->ops->epp_write_data(pp, bc->hdlctx.bufptr, i, 0))
490 return -1;
491 bc->hdlctx.bufptr += i;
492 break;
493
494 case tx_tail:
495 encode_hdlc(bc);
496 if (bc->hdlctx.bufcnt > 0) {
497 bc->hdlctx.state = tx_data;
498 break;
499 }
500 i = min_t(int, cnt, bc->hdlctx.flags);
501 if (i) {
502 cnt -= i;
503 bc->hdlctx.flags -= i;
504 memset(tmp, 0x7e, sizeof(tmp));
505 while (i > 0) {
506 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
507 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
508 return -1;
509 i -= j;
510 }
511 break;
512 }
513
514 default: /* fall through */
515 if (bc->hdlctx.calibrate <= 0)
516 return 0;
517 i = min_t(int, cnt, bc->hdlctx.calibrate);
518 cnt -= i;
519 bc->hdlctx.calibrate -= i;
520 memset(tmp, 0, sizeof(tmp));
521 while (i > 0) {
522 j = (i > sizeof(tmp)) ? sizeof(tmp) : i;
523 if (j != pp->ops->epp_write_data(pp, tmp, j, 0))
524 return -1;
525 i -= j;
526 }
527 break;
528 }
529 }
530 return 0;
531 }
532
533 /* ---------------------------------------------------------------------- */
534
535 static void do_rxpacket(struct net_device *dev)
536 {
537 struct baycom_state *bc = netdev_priv(dev);
538 struct sk_buff *skb;
539 unsigned char *cp;
540 unsigned pktlen;
541
542 if (bc->hdlcrx.bufcnt < 4)
543 return;
544 if (!check_crc_ccitt(bc->hdlcrx.buf, bc->hdlcrx.bufcnt))
545 return;
546 pktlen = bc->hdlcrx.bufcnt-2+1; /* KISS kludge */
547 if (!(skb = dev_alloc_skb(pktlen))) {
548 printk("%s: memory squeeze, dropping packet\n", dev->name);
549 dev->stats.rx_dropped++;
550 return;
551 }
552 cp = skb_put(skb, pktlen);
553 *cp++ = 0; /* KISS kludge */
554 memcpy(cp, bc->hdlcrx.buf, pktlen - 1);
555 skb->protocol = ax25_type_trans(skb, dev);
556 netif_rx(skb);
557 dev->stats.rx_packets++;
558 }
559
560 static int receive(struct net_device *dev, int cnt)
561 {
562 struct baycom_state *bc = netdev_priv(dev);
563 struct parport *pp = bc->pdev->port;
564 unsigned int bitbuf, notbitstream, bitstream, numbits, state;
565 unsigned char tmp[128];
566 unsigned char *cp;
567 int cnt2, ret = 0;
568 int j;
569
570 numbits = bc->hdlcrx.numbits;
571 state = bc->hdlcrx.state;
572 bitstream = bc->hdlcrx.bitstream;
573 bitbuf = bc->hdlcrx.bitbuf;
574 while (cnt > 0) {
575 cnt2 = (cnt > sizeof(tmp)) ? sizeof(tmp) : cnt;
576 cnt -= cnt2;
577 if (cnt2 != pp->ops->epp_read_data(pp, tmp, cnt2, 0)) {
578 ret = -1;
579 break;
580 }
581 cp = tmp;
582 for (; cnt2 > 0; cnt2--, cp++) {
583 bitstream >>= 8;
584 bitstream |= (*cp) << 8;
585 bitbuf >>= 8;
586 bitbuf |= (*cp) << 8;
587 numbits += 8;
588 notbitstream = ~bitstream;
589 for (j = 0; j < 8; j++) {
590
591 /* flag or abort */
592 if (unlikely(!(notbitstream & (0x0fc << j)))) {
593
594 /* abort received */
595 if (!(notbitstream & (0x1fc << j)))
596 state = 0;
597
598 /* not flag received */
599 else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) {
600 if (state)
601 do_rxpacket(dev);
602 bc->hdlcrx.bufcnt = 0;
603 bc->hdlcrx.bufptr = bc->hdlcrx.buf;
604 state = 1;
605 numbits = 7-j;
606 }
607 }
608
609 /* stuffed bit */
610 else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
611 numbits--;
612 bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);
613 }
614 }
615 while (state && numbits >= 8) {
616 if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
617 state = 0;
618 } else {
619 *(bc->hdlcrx.bufptr)++ = bitbuf >> (16-numbits);
620 bc->hdlcrx.bufcnt++;
621 numbits -= 8;
622 }
623 }
624 }
625 }
626 bc->hdlcrx.numbits = numbits;
627 bc->hdlcrx.state = state;
628 bc->hdlcrx.bitstream = bitstream;
629 bc->hdlcrx.bitbuf = bitbuf;
630 return ret;
631 }
632
633 /* --------------------------------------------------------------------- */
634
635 #ifdef __i386__
636 #include <asm/msr.h>
637 #define GETTICK(x) \
638 ({ \
639 if (cpu_has_tsc) \
640 rdtscl(x); \
641 })
642 #else /* __i386__ */
643 #define GETTICK(x)
644 #endif /* __i386__ */
645
646 static void epp_bh(struct work_struct *work)
647 {
648 struct net_device *dev;
649 struct baycom_state *bc;
650 struct parport *pp;
651 unsigned char stat;
652 unsigned char tmp[2];
653 unsigned int time1 = 0, time2 = 0, time3 = 0;
654 int cnt, cnt2;
655
656 bc = container_of(work, struct baycom_state, run_work.work);
657 dev = bc->dev;
658 if (!bc->work_running)
659 return;
660 baycom_int_freq(bc);
661 pp = bc->pdev->port;
662 /* update status */
663 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
664 goto epptimeout;
665 bc->stat = stat;
666 bc->debug_vals.last_pllcorr = stat;
667 GETTICK(time1);
668 if (bc->modem == EPP_FPGAEXTSTATUS) {
669 /* get input count */
670 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|1;
671 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
672 goto epptimeout;
673 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
674 goto epptimeout;
675 cnt = tmp[0] | (tmp[1] << 8);
676 cnt &= 0x7fff;
677 /* get output count */
678 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE|2;
679 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
680 goto epptimeout;
681 if (pp->ops->epp_read_addr(pp, tmp, 2, 0) != 2)
682 goto epptimeout;
683 cnt2 = tmp[0] | (tmp[1] << 8);
684 cnt2 = 16384 - (cnt2 & 0x7fff);
685 /* return to normal */
686 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
687 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
688 goto epptimeout;
689 if (transmit(bc, cnt2, stat))
690 goto epptimeout;
691 GETTICK(time2);
692 if (receive(dev, cnt))
693 goto epptimeout;
694 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
695 goto epptimeout;
696 bc->stat = stat;
697 } else {
698 /* try to tx */
699 switch (stat & (EPP_NTAEF|EPP_NTHF)) {
700 case EPP_NTHF:
701 cnt = 2048 - 256;
702 break;
703
704 case EPP_NTAEF:
705 cnt = 2048 - 1793;
706 break;
707
708 case 0:
709 cnt = 0;
710 break;
711
712 default:
713 cnt = 2048 - 1025;
714 break;
715 }
716 if (transmit(bc, cnt, stat))
717 goto epptimeout;
718 GETTICK(time2);
719 /* do receiver */
720 while ((stat & (EPP_NRAEF|EPP_NRHF)) != EPP_NRHF) {
721 switch (stat & (EPP_NRAEF|EPP_NRHF)) {
722 case EPP_NRAEF:
723 cnt = 1025;
724 break;
725
726 case 0:
727 cnt = 1793;
728 break;
729
730 default:
731 cnt = 256;
732 break;
733 }
734 if (receive(dev, cnt))
735 goto epptimeout;
736 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
737 goto epptimeout;
738 }
739 cnt = 0;
740 if (bc->bitrate < 50000)
741 cnt = 256;
742 else if (bc->bitrate < 100000)
743 cnt = 128;
744 while (cnt > 0 && stat & EPP_NREF) {
745 if (receive(dev, 1))
746 goto epptimeout;
747 cnt--;
748 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
749 goto epptimeout;
750 }
751 }
752 GETTICK(time3);
753 #ifdef BAYCOM_DEBUG
754 bc->debug_vals.mod_cycles = time2 - time1;
755 bc->debug_vals.demod_cycles = time3 - time2;
756 #endif /* BAYCOM_DEBUG */
757 schedule_delayed_work(&bc->run_work, 1);
758 if (!bc->skb)
759 netif_wake_queue(dev);
760 return;
761 epptimeout:
762 printk(KERN_ERR "%s: EPP timeout!\n", bc_drvname);
763 }
764
765 /* ---------------------------------------------------------------------- */
766 /*
767 * ===================== network driver interface =========================
768 */
769
770 static int baycom_send_packet(struct sk_buff *skb, struct net_device *dev)
771 {
772 struct baycom_state *bc = netdev_priv(dev);
773
774 if (skb->data[0] != 0) {
775 do_kiss_params(bc, skb->data, skb->len);
776 dev_kfree_skb(skb);
777 return NETDEV_TX_OK;
778 }
779 if (bc->skb)
780 return NETDEV_TX_LOCKED;
781 /* strip KISS byte */
782 if (skb->len >= HDLCDRV_MAXFLEN+1 || skb->len < 3) {
783 dev_kfree_skb(skb);
784 return NETDEV_TX_OK;
785 }
786 netif_stop_queue(dev);
787 bc->skb = skb;
788 return NETDEV_TX_OK;
789 }
790
791 /* --------------------------------------------------------------------- */
792
793 static int baycom_set_mac_address(struct net_device *dev, void *addr)
794 {
795 struct sockaddr *sa = (struct sockaddr *)addr;
796
797 /* addr is an AX.25 shifted ASCII mac address */
798 memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
799 return 0;
800 }
801
802 /* --------------------------------------------------------------------- */
803
804 static void epp_wakeup(void *handle)
805 {
806 struct net_device *dev = (struct net_device *)handle;
807 struct baycom_state *bc = netdev_priv(dev);
808
809 printk(KERN_DEBUG "baycom_epp: %s: why am I being woken up?\n", dev->name);
810 if (!parport_claim(bc->pdev))
811 printk(KERN_DEBUG "baycom_epp: %s: I'm broken.\n", dev->name);
812 }
813
814 /* --------------------------------------------------------------------- */
815
816 /*
817 * Open/initialize the board. This is called (in the current kernel)
818 * sometime after booting when the 'ifconfig' program is run.
819 *
820 * This routine should set everything up anew at each open, even
821 * registers that "should" only need to be set once at boot, so that
822 * there is non-reboot way to recover if something goes wrong.
823 */
824
825 static int epp_open(struct net_device *dev)
826 {
827 struct baycom_state *bc = netdev_priv(dev);
828 struct parport *pp = parport_find_base(dev->base_addr);
829 unsigned int i, j;
830 unsigned char tmp[128];
831 unsigned char stat;
832 unsigned long tstart;
833
834 if (!pp) {
835 printk(KERN_ERR "%s: parport at 0x%lx unknown\n", bc_drvname, dev->base_addr);
836 return -ENXIO;
837 }
838 #if 0
839 if (pp->irq < 0) {
840 printk(KERN_ERR "%s: parport at 0x%lx has no irq\n", bc_drvname, pp->base);
841 parport_put_port(pp);
842 return -ENXIO;
843 }
844 #endif
845 if ((~pp->modes) & (PARPORT_MODE_TRISTATE | PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT)) {
846 printk(KERN_ERR "%s: parport at 0x%lx cannot be used\n",
847 bc_drvname, pp->base);
848 parport_put_port(pp);
849 return -EIO;
850 }
851 memset(&bc->modem, 0, sizeof(bc->modem));
852 bc->pdev = parport_register_device(pp, dev->name, NULL, epp_wakeup,
853 NULL, PARPORT_DEV_EXCL, dev);
854 parport_put_port(pp);
855 if (!bc->pdev) {
856 printk(KERN_ERR "%s: cannot register parport at 0x%lx\n", bc_drvname, pp->base);
857 return -ENXIO;
858 }
859 if (parport_claim(bc->pdev)) {
860 printk(KERN_ERR "%s: parport at 0x%lx busy\n", bc_drvname, pp->base);
861 parport_unregister_device(bc->pdev);
862 return -EBUSY;
863 }
864 dev->irq = /*pp->irq*/ 0;
865 INIT_DELAYED_WORK(&bc->run_work, epp_bh);
866 bc->work_running = 1;
867 bc->modem = EPP_CONVENTIONAL;
868 if (eppconfig(bc))
869 printk(KERN_INFO "%s: no FPGA detected, assuming conventional EPP modem\n", bc_drvname);
870 else
871 bc->modem = /*EPP_FPGA*/ EPP_FPGAEXTSTATUS;
872 parport_write_control(pp, LPTCTRL_PROGRAM); /* prepare EPP mode; we aren't using interrupts */
873 /* reset the modem */
874 tmp[0] = 0;
875 tmp[1] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE;
876 if (pp->ops->epp_write_addr(pp, tmp, 2, 0) != 2)
877 goto epptimeout;
878 /* autoprobe baud rate */
879 tstart = jiffies;
880 i = 0;
881 while (time_before(jiffies, tstart + HZ/3)) {
882 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
883 goto epptimeout;
884 if ((stat & (EPP_NRAEF|EPP_NRHF)) == EPP_NRHF) {
885 schedule();
886 continue;
887 }
888 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
889 goto epptimeout;
890 if (pp->ops->epp_read_data(pp, tmp, 128, 0) != 128)
891 goto epptimeout;
892 i += 256;
893 }
894 for (j = 0; j < 256; j++) {
895 if (pp->ops->epp_read_addr(pp, &stat, 1, 0) != 1)
896 goto epptimeout;
897 if (!(stat & EPP_NREF))
898 break;
899 if (pp->ops->epp_read_data(pp, tmp, 1, 0) != 1)
900 goto epptimeout;
901 i++;
902 }
903 tstart = jiffies - tstart;
904 bc->bitrate = i * (8 * HZ) / tstart;
905 j = 1;
906 i = bc->bitrate >> 3;
907 while (j < 7 && i > 150) {
908 j++;
909 i >>= 1;
910 }
911 printk(KERN_INFO "%s: autoprobed bitrate: %d int divider: %d int rate: %d\n",
912 bc_drvname, bc->bitrate, j, bc->bitrate >> (j+2));
913 tmp[0] = EPP_TX_FIFO_ENABLE|EPP_RX_FIFO_ENABLE|EPP_MODEM_ENABLE/*|j*/;
914 if (pp->ops->epp_write_addr(pp, tmp, 1, 0) != 1)
915 goto epptimeout;
916 /*
917 * initialise hdlc variables
918 */
919 bc->hdlcrx.state = 0;
920 bc->hdlcrx.numbits = 0;
921 bc->hdlctx.state = tx_idle;
922 bc->hdlctx.bufcnt = 0;
923 bc->hdlctx.slotcnt = bc->ch_params.slottime;
924 bc->hdlctx.calibrate = 0;
925 /* start the bottom half stuff */
926 schedule_delayed_work(&bc->run_work, 1);
927 netif_start_queue(dev);
928 return 0;
929
930 epptimeout:
931 printk(KERN_ERR "%s: epp timeout during bitrate probe\n", bc_drvname);
932 parport_write_control(pp, 0); /* reset the adapter */
933 parport_release(bc->pdev);
934 parport_unregister_device(bc->pdev);
935 return -EIO;
936 }
937
938 /* --------------------------------------------------------------------- */
939
940 static int epp_close(struct net_device *dev)
941 {
942 struct baycom_state *bc = netdev_priv(dev);
943 struct parport *pp = bc->pdev->port;
944 unsigned char tmp[1];
945
946 bc->work_running = 0;
947 cancel_delayed_work_sync(&bc->run_work);
948 bc->stat = EPP_DCDBIT;
949 tmp[0] = 0;
950 pp->ops->epp_write_addr(pp, tmp, 1, 0);
951 parport_write_control(pp, 0); /* reset the adapter */
952 parport_release(bc->pdev);
953 parport_unregister_device(bc->pdev);
954 if (bc->skb)
955 dev_kfree_skb(bc->skb);
956 bc->skb = NULL;
957 printk(KERN_INFO "%s: close epp at iobase 0x%lx irq %u\n",
958 bc_drvname, dev->base_addr, dev->irq);
959 return 0;
960 }
961
962 /* --------------------------------------------------------------------- */
963
964 static int baycom_setmode(struct baycom_state *bc, const char *modestr)
965 {
966 const char *cp;
967
968 if (strstr(modestr,"intclk"))
969 bc->cfg.intclk = 1;
970 if (strstr(modestr,"extclk"))
971 bc->cfg.intclk = 0;
972 if (strstr(modestr,"intmodem"))
973 bc->cfg.extmodem = 0;
974 if (strstr(modestr,"extmodem"))
975 bc->cfg.extmodem = 1;
976 if (strstr(modestr,"noloopback"))
977 bc->cfg.loopback = 0;
978 if (strstr(modestr,"loopback"))
979 bc->cfg.loopback = 1;
980 if ((cp = strstr(modestr,"fclk="))) {
981 bc->cfg.fclk = simple_strtoul(cp+5, NULL, 0);
982 if (bc->cfg.fclk < 1000000)
983 bc->cfg.fclk = 1000000;
984 if (bc->cfg.fclk > 25000000)
985 bc->cfg.fclk = 25000000;
986 }
987 if ((cp = strstr(modestr,"bps="))) {
988 bc->cfg.bps = simple_strtoul(cp+4, NULL, 0);
989 if (bc->cfg.bps < 1000)
990 bc->cfg.bps = 1000;
991 if (bc->cfg.bps > 1500000)
992 bc->cfg.bps = 1500000;
993 }
994 return 0;
995 }
996
997 /* --------------------------------------------------------------------- */
998
999 static int baycom_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1000 {
1001 struct baycom_state *bc = netdev_priv(dev);
1002 struct hdlcdrv_ioctl hi;
1003
1004 if (cmd != SIOCDEVPRIVATE)
1005 return -ENOIOCTLCMD;
1006
1007 if (copy_from_user(&hi, ifr->ifr_data, sizeof(hi)))
1008 return -EFAULT;
1009 switch (hi.cmd) {
1010 default:
1011 return -ENOIOCTLCMD;
1012
1013 case HDLCDRVCTL_GETCHANNELPAR:
1014 hi.data.cp.tx_delay = bc->ch_params.tx_delay;
1015 hi.data.cp.tx_tail = bc->ch_params.tx_tail;
1016 hi.data.cp.slottime = bc->ch_params.slottime;
1017 hi.data.cp.ppersist = bc->ch_params.ppersist;
1018 hi.data.cp.fulldup = bc->ch_params.fulldup;
1019 break;
1020
1021 case HDLCDRVCTL_SETCHANNELPAR:
1022 if (!capable(CAP_NET_ADMIN))
1023 return -EACCES;
1024 bc->ch_params.tx_delay = hi.data.cp.tx_delay;
1025 bc->ch_params.tx_tail = hi.data.cp.tx_tail;
1026 bc->ch_params.slottime = hi.data.cp.slottime;
1027 bc->ch_params.ppersist = hi.data.cp.ppersist;
1028 bc->ch_params.fulldup = hi.data.cp.fulldup;
1029 bc->hdlctx.slotcnt = 1;
1030 return 0;
1031
1032 case HDLCDRVCTL_GETMODEMPAR:
1033 hi.data.mp.iobase = dev->base_addr;
1034 hi.data.mp.irq = dev->irq;
1035 hi.data.mp.dma = dev->dma;
1036 hi.data.mp.dma2 = 0;
1037 hi.data.mp.seriobase = 0;
1038 hi.data.mp.pariobase = 0;
1039 hi.data.mp.midiiobase = 0;
1040 break;
1041
1042 case HDLCDRVCTL_SETMODEMPAR:
1043 if ((!capable(CAP_SYS_RAWIO)) || netif_running(dev))
1044 return -EACCES;
1045 dev->base_addr = hi.data.mp.iobase;
1046 dev->irq = /*hi.data.mp.irq*/0;
1047 dev->dma = /*hi.data.mp.dma*/0;
1048 return 0;
1049
1050 case HDLCDRVCTL_GETSTAT:
1051 hi.data.cs.ptt = !!(bc->stat & EPP_PTTBIT);
1052 hi.data.cs.dcd = !(bc->stat & EPP_DCDBIT);
1053 hi.data.cs.ptt_keyed = bc->ptt_keyed;
1054 hi.data.cs.tx_packets = dev->stats.tx_packets;
1055 hi.data.cs.tx_errors = dev->stats.tx_errors;
1056 hi.data.cs.rx_packets = dev->stats.rx_packets;
1057 hi.data.cs.rx_errors = dev->stats.rx_errors;
1058 break;
1059
1060 case HDLCDRVCTL_OLDGETSTAT:
1061 hi.data.ocs.ptt = !!(bc->stat & EPP_PTTBIT);
1062 hi.data.ocs.dcd = !(bc->stat & EPP_DCDBIT);
1063 hi.data.ocs.ptt_keyed = bc->ptt_keyed;
1064 break;
1065
1066 case HDLCDRVCTL_CALIBRATE:
1067 if (!capable(CAP_SYS_RAWIO))
1068 return -EACCES;
1069 bc->hdlctx.calibrate = hi.data.calibrate * bc->bitrate / 8;
1070 return 0;
1071
1072 case HDLCDRVCTL_DRIVERNAME:
1073 strncpy(hi.data.drivername, "baycom_epp", sizeof(hi.data.drivername));
1074 break;
1075
1076 case HDLCDRVCTL_GETMODE:
1077 sprintf(hi.data.modename, "%sclk,%smodem,fclk=%d,bps=%d%s",
1078 bc->cfg.intclk ? "int" : "ext",
1079 bc->cfg.extmodem ? "ext" : "int", bc->cfg.fclk, bc->cfg.bps,
1080 bc->cfg.loopback ? ",loopback" : "");
1081 break;
1082
1083 case HDLCDRVCTL_SETMODE:
1084 if (!capable(CAP_NET_ADMIN) || netif_running(dev))
1085 return -EACCES;
1086 hi.data.modename[sizeof(hi.data.modename)-1] = '\0';
1087 return baycom_setmode(bc, hi.data.modename);
1088
1089 case HDLCDRVCTL_MODELIST:
1090 strncpy(hi.data.modename, "intclk,extclk,intmodem,extmodem,divider=x",
1091 sizeof(hi.data.modename));
1092 break;
1093
1094 case HDLCDRVCTL_MODEMPARMASK:
1095 return HDLCDRV_PARMASK_IOBASE;
1096
1097 }
1098 if (copy_to_user(ifr->ifr_data, &hi, sizeof(hi)))
1099 return -EFAULT;
1100 return 0;
1101 }
1102
1103 /* --------------------------------------------------------------------- */
1104
1105 static const struct net_device_ops baycom_netdev_ops = {
1106 .ndo_open = epp_open,
1107 .ndo_stop = epp_close,
1108 .ndo_do_ioctl = baycom_ioctl,
1109 .ndo_start_xmit = baycom_send_packet,
1110 .ndo_set_mac_address = baycom_set_mac_address,
1111 };
1112
1113 /*
1114 * Check for a network adaptor of this type, and return '0' if one exists.
1115 * If dev->base_addr == 0, probe all likely locations.
1116 * If dev->base_addr == 1, always return failure.
1117 * If dev->base_addr == 2, allocate space for the device and return success
1118 * (detachable devices only).
1119 */
1120 static void baycom_probe(struct net_device *dev)
1121 {
1122 const struct hdlcdrv_channel_params dflt_ch_params = {
1123 20, 2, 10, 40, 0
1124 };
1125 struct baycom_state *bc;
1126
1127 /*
1128 * not a real probe! only initialize data structures
1129 */
1130 bc = netdev_priv(dev);
1131 /*
1132 * initialize the baycom_state struct
1133 */
1134 bc->ch_params = dflt_ch_params;
1135 bc->ptt_keyed = 0;
1136
1137 /*
1138 * initialize the device struct
1139 */
1140
1141 /* Fill in the fields of the device structure */
1142 bc->skb = NULL;
1143
1144 dev->netdev_ops = &baycom_netdev_ops;
1145 dev->header_ops = &ax25_header_ops;
1146
1147 dev->type = ARPHRD_AX25; /* AF_AX25 device */
1148 dev->hard_header_len = AX25_MAX_HEADER_LEN + AX25_BPQ_HEADER_LEN;
1149 dev->mtu = AX25_DEF_PACLEN; /* eth_mtu is the default */
1150 dev->addr_len = AX25_ADDR_LEN; /* sizeof an ax.25 address */
1151 memcpy(dev->broadcast, &ax25_bcast, AX25_ADDR_LEN);
1152 memcpy(dev->dev_addr, &null_ax25_address, AX25_ADDR_LEN);
1153 dev->tx_queue_len = 16;
1154
1155 /* New style flags */
1156 dev->flags = 0;
1157 }
1158
1159 /* --------------------------------------------------------------------- */
1160
1161 /*
1162 * command line settable parameters
1163 */
1164 static const char *mode[NR_PORTS] = { "", };
1165 static int iobase[NR_PORTS] = { 0x378, };
1166
1167 module_param_array(mode, charp, NULL, 0);
1168 MODULE_PARM_DESC(mode, "baycom operating mode");
1169 module_param_array(iobase, int, NULL, 0);
1170 MODULE_PARM_DESC(iobase, "baycom io base address");
1171
1172 MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
1173 MODULE_DESCRIPTION("Baycom epp amateur radio modem driver");
1174 MODULE_LICENSE("GPL");
1175
1176 /* --------------------------------------------------------------------- */
1177
1178 static void __init baycom_epp_dev_setup(struct net_device *dev)
1179 {
1180 struct baycom_state *bc = netdev_priv(dev);
1181
1182 /*
1183 * initialize part of the baycom_state struct
1184 */
1185 bc->dev = dev;
1186 bc->magic = BAYCOM_MAGIC;
1187 bc->cfg.fclk = 19666600;
1188 bc->cfg.bps = 9600;
1189 /*
1190 * initialize part of the device struct
1191 */
1192 baycom_probe(dev);
1193 }
1194
1195 static int __init init_baycomepp(void)
1196 {
1197 int i, found = 0;
1198 char set_hw = 1;
1199
1200 printk(bc_drvinfo);
1201 /*
1202 * register net devices
1203 */
1204 for (i = 0; i < NR_PORTS; i++) {
1205 struct net_device *dev;
1206
1207 dev = alloc_netdev(sizeof(struct baycom_state), "bce%d",
1208 baycom_epp_dev_setup);
1209
1210 if (!dev) {
1211 printk(KERN_WARNING "bce%d : out of memory\n", i);
1212 return found ? 0 : -ENOMEM;
1213 }
1214
1215 sprintf(dev->name, "bce%d", i);
1216 dev->base_addr = iobase[i];
1217
1218 if (!mode[i])
1219 set_hw = 0;
1220 if (!set_hw)
1221 iobase[i] = 0;
1222
1223 if (register_netdev(dev)) {
1224 printk(KERN_WARNING "%s: cannot register net device %s\n", bc_drvname, dev->name);
1225 free_netdev(dev);
1226 break;
1227 }
1228 if (set_hw && baycom_setmode(netdev_priv(dev), mode[i]))
1229 set_hw = 0;
1230 baycom_device[i] = dev;
1231 found++;
1232 }
1233
1234 return found ? 0 : -ENXIO;
1235 }
1236
1237 static void __exit cleanup_baycomepp(void)
1238 {
1239 int i;
1240
1241 for(i = 0; i < NR_PORTS; i++) {
1242 struct net_device *dev = baycom_device[i];
1243
1244 if (dev) {
1245 struct baycom_state *bc = netdev_priv(dev);
1246 if (bc->magic == BAYCOM_MAGIC) {
1247 unregister_netdev(dev);
1248 free_netdev(dev);
1249 } else
1250 printk(paranoia_str, "cleanup_module");
1251 }
1252 }
1253 }
1254
1255 module_init(init_baycomepp);
1256 module_exit(cleanup_baycomepp);
1257
1258 /* --------------------------------------------------------------------- */
1259
1260 #ifndef MODULE
1261
1262 /*
1263 * format: baycom_epp=io,mode
1264 * mode: fpga config options
1265 */
1266
1267 static int __init baycom_epp_setup(char *str)
1268 {
1269 static unsigned __initdata nr_dev = 0;
1270 int ints[2];
1271
1272 if (nr_dev >= NR_PORTS)
1273 return 0;
1274 str = get_options(str, 2, ints);
1275 if (ints[0] < 1)
1276 return 0;
1277 mode[nr_dev] = str;
1278 iobase[nr_dev] = ints[1];
1279 nr_dev++;
1280 return 1;
1281 }
1282
1283 __setup("baycom_epp=", baycom_epp_setup);
1284
1285 #endif /* MODULE */
1286 /* --------------------------------------------------------------------- */
Linux with added FPC-III support