?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
dt-bindings: mtd: ingenic: Use standard ecc-engine property
[linux/fpc-iii.git] / drivers / net / wireless / ralink / rt2x00 / rt61pci.h
blobab8641547a1f6a61f763f9ab7dfc2e8e15dd7a4f
1 /*
2 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
3 <http://rt2x00.serialmonkey.com>
4
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, see <http://www.gnu.org/licenses/>.
17 */
18
19 /*
20 Module: rt61pci
21 Abstract: Data structures and registers for the rt61pci module.
22 Supported chipsets: RT2561, RT2561s, RT2661.
23 */
24
25 #ifndef RT61PCI_H
26 #define RT61PCI_H
27
28 /*
29 * RT chip PCI IDs.
30 */
31 #define RT2561s_PCI_ID 0x0301
32 #define RT2561_PCI_ID 0x0302
33 #define RT2661_PCI_ID 0x0401
34
35 /*
36 * RF chip defines.
37 */
38 #define RF5225 0x0001
39 #define RF5325 0x0002
40 #define RF2527 0x0003
41 #define RF2529 0x0004
42
43 /*
44 * Signal information.
45 * Default offset is required for RSSI <-> dBm conversion.
46 */
47 #define DEFAULT_RSSI_OFFSET 120
48
49 /*
50 * Register layout information.
51 */
52 #define CSR_REG_BASE 0x3000
53 #define CSR_REG_SIZE 0x04b0
54 #define EEPROM_BASE 0x0000
55 #define EEPROM_SIZE 0x0100
56 #define BBP_BASE 0x0000
57 #define BBP_SIZE 0x0080
58 #define RF_BASE 0x0004
59 #define RF_SIZE 0x0010
60
61 /*
62 * Number of TX queues.
63 */
64 #define NUM_TX_QUEUES 4
65
66 /*
67 * PCI registers.
68 */
69
70 /*
71 * HOST_CMD_CSR: For HOST to interrupt embedded processor
72 */
73 #define HOST_CMD_CSR 0x0008
74 #define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x0000007f)
75 #define HOST_CMD_CSR_INTERRUPT_MCU FIELD32(0x00000080)
76
77 /*
78 * MCU_CNTL_CSR
79 * SELECT_BANK: Select 8051 program bank.
80 * RESET: Enable 8051 reset state.
81 * READY: Ready state for 8051.
82 */
83 #define MCU_CNTL_CSR 0x000c
84 #define MCU_CNTL_CSR_SELECT_BANK FIELD32(0x00000001)
85 #define MCU_CNTL_CSR_RESET FIELD32(0x00000002)
86 #define MCU_CNTL_CSR_READY FIELD32(0x00000004)
87
88 /*
89 * SOFT_RESET_CSR
90 * FORCE_CLOCK_ON: Host force MAC clock ON
91 */
92 #define SOFT_RESET_CSR 0x0010
93 #define SOFT_RESET_CSR_FORCE_CLOCK_ON FIELD32(0x00000002)
94
95 /*
96 * MCU_INT_SOURCE_CSR: MCU interrupt source/mask register.
97 */
98 #define MCU_INT_SOURCE_CSR 0x0014
99 #define MCU_INT_SOURCE_CSR_0 FIELD32(0x00000001)
100 #define MCU_INT_SOURCE_CSR_1 FIELD32(0x00000002)
101 #define MCU_INT_SOURCE_CSR_2 FIELD32(0x00000004)
102 #define MCU_INT_SOURCE_CSR_3 FIELD32(0x00000008)
103 #define MCU_INT_SOURCE_CSR_4 FIELD32(0x00000010)
104 #define MCU_INT_SOURCE_CSR_5 FIELD32(0x00000020)
105 #define MCU_INT_SOURCE_CSR_6 FIELD32(0x00000040)
106 #define MCU_INT_SOURCE_CSR_7 FIELD32(0x00000080)
107 #define MCU_INT_SOURCE_CSR_TWAKEUP FIELD32(0x00000100)
108 #define MCU_INT_SOURCE_CSR_TBTT_EXPIRE FIELD32(0x00000200)
109
110 /*
111 * MCU_INT_MASK_CSR: MCU interrupt source/mask register.
112 */
113 #define MCU_INT_MASK_CSR 0x0018
114 #define MCU_INT_MASK_CSR_0 FIELD32(0x00000001)
115 #define MCU_INT_MASK_CSR_1 FIELD32(0x00000002)
116 #define MCU_INT_MASK_CSR_2 FIELD32(0x00000004)
117 #define MCU_INT_MASK_CSR_3 FIELD32(0x00000008)
118 #define MCU_INT_MASK_CSR_4 FIELD32(0x00000010)
119 #define MCU_INT_MASK_CSR_5 FIELD32(0x00000020)
120 #define MCU_INT_MASK_CSR_6 FIELD32(0x00000040)
121 #define MCU_INT_MASK_CSR_7 FIELD32(0x00000080)
122 #define MCU_INT_MASK_CSR_TWAKEUP FIELD32(0x00000100)
123 #define MCU_INT_MASK_CSR_TBTT_EXPIRE FIELD32(0x00000200)
124
125 /*
126 * PCI_USEC_CSR
127 */
128 #define PCI_USEC_CSR 0x001c
129
130 /*
131 * Security key table memory.
132 * 16 entries 32-byte for shared key table
133 * 64 entries 32-byte for pairwise key table
134 * 64 entries 8-byte for pairwise ta key table
135 */
136 #define SHARED_KEY_TABLE_BASE 0x1000
137 #define PAIRWISE_KEY_TABLE_BASE 0x1200
138 #define PAIRWISE_TA_TABLE_BASE 0x1a00
139
140 #define SHARED_KEY_ENTRY(__idx) \
141 (SHARED_KEY_TABLE_BASE + \
142 ((__idx) * sizeof(struct hw_key_entry)))
143 #define PAIRWISE_KEY_ENTRY(__idx) \
144 (PAIRWISE_KEY_TABLE_BASE + \
145 ((__idx) * sizeof(struct hw_key_entry)))
146 #define PAIRWISE_TA_ENTRY(__idx) \
147 (PAIRWISE_TA_TABLE_BASE + \
148 ((__idx) * sizeof(struct hw_pairwise_ta_entry)))
149
150 struct hw_key_entry {
151 u8 key[16];
152 u8 tx_mic[8];
153 u8 rx_mic[8];
154 } __packed;
155
156 struct hw_pairwise_ta_entry {
157 u8 address[6];
158 u8 cipher;
159 u8 reserved;
160 } __packed;
161
162 /*
163 * Other on-chip shared memory space.
164 */
165 #define HW_CIS_BASE 0x2000
166 #define HW_NULL_BASE 0x2b00
167
168 /*
169 * Since NULL frame won't be that long (256 byte),
170 * We steal 16 tail bytes to save debugging settings.
171 */
172 #define HW_DEBUG_SETTING_BASE 0x2bf0
173
174 /*
175 * On-chip BEACON frame space.
176 */
177 #define HW_BEACON_BASE0 0x2c00
178 #define HW_BEACON_BASE1 0x2d00
179 #define HW_BEACON_BASE2 0x2e00
180 #define HW_BEACON_BASE3 0x2f00
181
182 #define HW_BEACON_OFFSET(__index) \
183 (HW_BEACON_BASE0 + (__index * 0x0100))
184
185 /*
186 * HOST-MCU shared memory.
187 */
188
189 /*
190 * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
191 */
192 #define H2M_MAILBOX_CSR 0x2100
193 #define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
194 #define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00)
195 #define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000)
196 #define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000)
197
198 /*
199 * MCU_LEDCS: LED control for MCU Mailbox.
200 */
201 #define MCU_LEDCS_LED_MODE FIELD16(0x001f)
202 #define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020)
203 #define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040)
204 #define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080)
205 #define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100)
206 #define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200)
207 #define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400)
208 #define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800)
209 #define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000)
210 #define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000)
211 #define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000)
212 #define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000)
213
214 /*
215 * M2H_CMD_DONE_CSR.
216 */
217 #define M2H_CMD_DONE_CSR 0x2104
218
219 /*
220 * MCU_TXOP_ARRAY_BASE.
221 */
222 #define MCU_TXOP_ARRAY_BASE 0x2110
223
224 /*
225 * MAC Control/Status Registers(CSR).
226 * Some values are set in TU, whereas 1 TU == 1024 us.
227 */
228
229 /*
230 * MAC_CSR0: ASIC revision number.
231 */
232 #define MAC_CSR0 0x3000
233 #define MAC_CSR0_REVISION FIELD32(0x0000000f)
234 #define MAC_CSR0_CHIPSET FIELD32(0x000ffff0)
235
236 /*
237 * MAC_CSR1: System control register.
238 * SOFT_RESET: Software reset bit, 1: reset, 0: normal.
239 * BBP_RESET: Hardware reset BBP.
240 * HOST_READY: Host is ready after initialization, 1: ready.
241 */
242 #define MAC_CSR1 0x3004
243 #define MAC_CSR1_SOFT_RESET FIELD32(0x00000001)
244 #define MAC_CSR1_BBP_RESET FIELD32(0x00000002)
245 #define MAC_CSR1_HOST_READY FIELD32(0x00000004)
246
247 /*
248 * MAC_CSR2: STA MAC register 0.
249 */
250 #define MAC_CSR2 0x3008
251 #define MAC_CSR2_BYTE0 FIELD32(0x000000ff)
252 #define MAC_CSR2_BYTE1 FIELD32(0x0000ff00)
253 #define MAC_CSR2_BYTE2 FIELD32(0x00ff0000)
254 #define MAC_CSR2_BYTE3 FIELD32(0xff000000)
255
256 /*
257 * MAC_CSR3: STA MAC register 1.
258 * UNICAST_TO_ME_MASK:
259 * Used to mask off bits from byte 5 of the MAC address
260 * to determine the UNICAST_TO_ME bit for RX frames.
261 * The full mask is complemented by BSS_ID_MASK:
262 * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
263 */
264 #define MAC_CSR3 0x300c
265 #define MAC_CSR3_BYTE4 FIELD32(0x000000ff)
266 #define MAC_CSR3_BYTE5 FIELD32(0x0000ff00)
267 #define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
268
269 /*
270 * MAC_CSR4: BSSID register 0.
271 */
272 #define MAC_CSR4 0x3010
273 #define MAC_CSR4_BYTE0 FIELD32(0x000000ff)
274 #define MAC_CSR4_BYTE1 FIELD32(0x0000ff00)
275 #define MAC_CSR4_BYTE2 FIELD32(0x00ff0000)
276 #define MAC_CSR4_BYTE3 FIELD32(0xff000000)
277
278 /*
279 * MAC_CSR5: BSSID register 1.
280 * BSS_ID_MASK:
281 * This mask is used to mask off bits 0 and 1 of byte 5 of the
282 * BSSID. This will make sure that those bits will be ignored
283 * when determining the MY_BSS of RX frames.
284 * 0: 1-BSSID mode (BSS index = 0)
285 * 1: 2-BSSID mode (BSS index: Byte5, bit 0)
286 * 2: 2-BSSID mode (BSS index: byte5, bit 1)
287 * 3: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
288 */
289 #define MAC_CSR5 0x3014
290 #define MAC_CSR5_BYTE4 FIELD32(0x000000ff)
291 #define MAC_CSR5_BYTE5 FIELD32(0x0000ff00)
292 #define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000)
293
294 /*
295 * MAC_CSR6: Maximum frame length register.
296 */
297 #define MAC_CSR6 0x3018
298 #define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff)
299
300 /*
301 * MAC_CSR7: Reserved
302 */
303 #define MAC_CSR7 0x301c
304
305 /*
306 * MAC_CSR8: SIFS/EIFS register.
307 * All units are in US.
308 */
309 #define MAC_CSR8 0x3020
310 #define MAC_CSR8_SIFS FIELD32(0x000000ff)
311 #define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00)
312 #define MAC_CSR8_EIFS FIELD32(0xffff0000)
313
314 /*
315 * MAC_CSR9: Back-Off control register.
316 * SLOT_TIME: Slot time, default is 20us for 802.11BG.
317 * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1).
318 * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1).
319 * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD.
320 */
321 #define MAC_CSR9 0x3024
322 #define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff)
323 #define MAC_CSR9_CWMIN FIELD32(0x00000f00)
324 #define MAC_CSR9_CWMAX FIELD32(0x0000f000)
325 #define MAC_CSR9_CW_SELECT FIELD32(0x00010000)
326
327 /*
328 * MAC_CSR10: Power state configuration.
329 */
330 #define MAC_CSR10 0x3028
331
332 /*
333 * MAC_CSR11: Power saving transition time register.
334 * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU.
335 * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
336 * WAKEUP_LATENCY: In unit of TU.
337 */
338 #define MAC_CSR11 0x302c
339 #define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff)
340 #define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00)
341 #define MAC_CSR11_AUTOWAKE FIELD32(0x00008000)
342 #define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000)
343
344 /*
345 * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1).
346 * CURRENT_STATE: 0:sleep, 1:awake.
347 * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP.
348 * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake.
349 */
350 #define MAC_CSR12 0x3030
351 #define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001)
352 #define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002)
353 #define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004)
354 #define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008)
355
356 /*
357 * MAC_CSR13: GPIO.
358 * MAC_CSR13_VALx: GPIO value
359 * MAC_CSR13_DIRx: GPIO direction: 0 = output; 1 = input
360 */
361 #define MAC_CSR13 0x3034
362 #define MAC_CSR13_VAL0 FIELD32(0x00000001)
363 #define MAC_CSR13_VAL1 FIELD32(0x00000002)
364 #define MAC_CSR13_VAL2 FIELD32(0x00000004)
365 #define MAC_CSR13_VAL3 FIELD32(0x00000008)
366 #define MAC_CSR13_VAL4 FIELD32(0x00000010)
367 #define MAC_CSR13_VAL5 FIELD32(0x00000020)
368 #define MAC_CSR13_DIR0 FIELD32(0x00000100)
369 #define MAC_CSR13_DIR1 FIELD32(0x00000200)
370 #define MAC_CSR13_DIR2 FIELD32(0x00000400)
371 #define MAC_CSR13_DIR3 FIELD32(0x00000800)
372 #define MAC_CSR13_DIR4 FIELD32(0x00001000)
373 #define MAC_CSR13_DIR5 FIELD32(0x00002000)
374
375 /*
376 * MAC_CSR14: LED control register.
377 * ON_PERIOD: On period, default 70ms.
378 * OFF_PERIOD: Off period, default 30ms.
379 * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON.
380 * SW_LED: s/w LED, 1: ON, 0: OFF.
381 * HW_LED_POLARITY: 0: active low, 1: active high.
382 */
383 #define MAC_CSR14 0x3038
384 #define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff)
385 #define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00)
386 #define MAC_CSR14_HW_LED FIELD32(0x00010000)
387 #define MAC_CSR14_SW_LED FIELD32(0x00020000)
388 #define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000)
389 #define MAC_CSR14_SW_LED2 FIELD32(0x00080000)
390
391 /*
392 * MAC_CSR15: NAV control.
393 */
394 #define MAC_CSR15 0x303c
395
396 /*
397 * TXRX control registers.
398 * Some values are set in TU, whereas 1 TU == 1024 us.
399 */
400
401 /*
402 * TXRX_CSR0: TX/RX configuration register.
403 * TSF_OFFSET: Default is 24.
404 * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame.
405 * DISABLE_RX: Disable Rx engine.
406 * DROP_CRC: Drop CRC error.
407 * DROP_PHYSICAL: Drop physical error.
408 * DROP_CONTROL: Drop control frame.
409 * DROP_NOT_TO_ME: Drop not to me unicast frame.
410 * DROP_TO_DS: Drop fram ToDs bit is true.
411 * DROP_VERSION_ERROR: Drop version error frame.
412 * DROP_MULTICAST: Drop multicast frames.
413 * DROP_BORADCAST: Drop broadcast frames.
414 * DROP_ACK_CTS: Drop received ACK and CTS.
415 */
416 #define TXRX_CSR0 0x3040
417 #define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff)
418 #define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00)
419 #define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000)
420 #define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000)
421 #define TXRX_CSR0_DROP_CRC FIELD32(0x00020000)
422 #define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000)
423 #define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000)
424 #define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000)
425 #define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000)
426 #define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000)
427 #define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000)
428 #define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000)
429 #define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000)
430 #define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000)
431
432 /*
433 * TXRX_CSR1
434 */
435 #define TXRX_CSR1 0x3044
436 #define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f)
437 #define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080)
438 #define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00)
439 #define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000)
440 #define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000)
441 #define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000)
442 #define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000)
443 #define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000)
444
445 /*
446 * TXRX_CSR2
447 */
448 #define TXRX_CSR2 0x3048
449 #define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f)
450 #define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080)
451 #define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00)
452 #define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000)
453 #define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000)
454 #define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000)
455 #define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000)
456 #define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000)
457
458 /*
459 * TXRX_CSR3
460 */
461 #define TXRX_CSR3 0x304c
462 #define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f)
463 #define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080)
464 #define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00)
465 #define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000)
466 #define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000)
467 #define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000)
468 #define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000)
469 #define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000)
470
471 /*
472 * TXRX_CSR4: Auto-Responder/Tx-retry register.
473 * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble.
474 * OFDM_TX_RATE_DOWN: 1:enable.
475 * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step.
476 * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M.
477 */
478 #define TXRX_CSR4 0x3050
479 #define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff)
480 #define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700)
481 #define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000)
482 #define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000)
483 #define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000)
484 #define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000)
485 #define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000)
486 #define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000)
487 #define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000)
488 #define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000)
489
490 /*
491 * TXRX_CSR5
492 */
493 #define TXRX_CSR5 0x3054
494
495 /*
496 * TXRX_CSR6: ACK/CTS payload consumed time
497 */
498 #define TXRX_CSR6 0x3058
499
500 /*
501 * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps.
502 */
503 #define TXRX_CSR7 0x305c
504 #define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff)
505 #define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00)
506 #define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000)
507 #define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000)
508
509 /*
510 * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps.
511 */
512 #define TXRX_CSR8 0x3060
513 #define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff)
514 #define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00)
515 #define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000)
516 #define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000)
517
518 /*
519 * TXRX_CSR9: Synchronization control register.
520 * BEACON_INTERVAL: In unit of 1/16 TU.
521 * TSF_TICKING: Enable TSF auto counting.
522 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
523 * BEACON_GEN: Enable beacon generator.
524 */
525 #define TXRX_CSR9 0x3064
526 #define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff)
527 #define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000)
528 #define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000)
529 #define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000)
530 #define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000)
531 #define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000)
532
533 /*
534 * TXRX_CSR10: BEACON alignment.
535 */
536 #define TXRX_CSR10 0x3068
537
538 /*
539 * TXRX_CSR11: AES mask.
540 */
541 #define TXRX_CSR11 0x306c
542
543 /*
544 * TXRX_CSR12: TSF low 32.
545 */
546 #define TXRX_CSR12 0x3070
547 #define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff)
548
549 /*
550 * TXRX_CSR13: TSF high 32.
551 */
552 #define TXRX_CSR13 0x3074
553 #define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff)
554
555 /*
556 * TXRX_CSR14: TBTT timer.
557 */
558 #define TXRX_CSR14 0x3078
559
560 /*
561 * TXRX_CSR15: TKIP MIC priority byte "AND" mask.
562 */
563 #define TXRX_CSR15 0x307c
564
565 /*
566 * PHY control registers.
567 * Some values are set in TU, whereas 1 TU == 1024 us.
568 */
569
570 /*
571 * PHY_CSR0: RF/PS control.
572 */
573 #define PHY_CSR0 0x3080
574 #define PHY_CSR0_PA_PE_BG FIELD32(0x00010000)
575 #define PHY_CSR0_PA_PE_A FIELD32(0x00020000)
576
577 /*
578 * PHY_CSR1
579 */
580 #define PHY_CSR1 0x3084
581
582 /*
583 * PHY_CSR2: Pre-TX BBP control.
584 */
585 #define PHY_CSR2 0x3088
586
587 /*
588 * PHY_CSR3: BBP serial control register.
589 * VALUE: Register value to program into BBP.
590 * REG_NUM: Selected BBP register.
591 * READ_CONTROL: 0: Write BBP, 1: Read BBP.
592 * BUSY: 1: ASIC is busy execute BBP programming.
593 */
594 #define PHY_CSR3 0x308c
595 #define PHY_CSR3_VALUE FIELD32(0x000000ff)
596 #define PHY_CSR3_REGNUM FIELD32(0x00007f00)
597 #define PHY_CSR3_READ_CONTROL FIELD32(0x00008000)
598 #define PHY_CSR3_BUSY FIELD32(0x00010000)
599
600 /*
601 * PHY_CSR4: RF serial control register
602 * VALUE: Register value (include register id) serial out to RF/IF chip.
603 * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22).
604 * IF_SELECT: 1: select IF to program, 0: select RF to program.
605 * PLL_LD: RF PLL_LD status.
606 * BUSY: 1: ASIC is busy execute RF programming.
607 */
608 #define PHY_CSR4 0x3090
609 #define PHY_CSR4_VALUE FIELD32(0x00ffffff)
610 #define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000)
611 #define PHY_CSR4_IF_SELECT FIELD32(0x20000000)
612 #define PHY_CSR4_PLL_LD FIELD32(0x40000000)
613 #define PHY_CSR4_BUSY FIELD32(0x80000000)
614
615 /*
616 * PHY_CSR5: RX to TX signal switch timing control.
617 */
618 #define PHY_CSR5 0x3094
619 #define PHY_CSR5_IQ_FLIP FIELD32(0x00000004)
620
621 /*
622 * PHY_CSR6: TX to RX signal timing control.
623 */
624 #define PHY_CSR6 0x3098
625 #define PHY_CSR6_IQ_FLIP FIELD32(0x00000004)
626
627 /*
628 * PHY_CSR7: TX DAC switching timing control.
629 */
630 #define PHY_CSR7 0x309c
631
632 /*
633 * Security control register.
634 */
635
636 /*
637 * SEC_CSR0: Shared key table control.
638 */
639 #define SEC_CSR0 0x30a0
640 #define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001)
641 #define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002)
642 #define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004)
643 #define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008)
644 #define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010)
645 #define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020)
646 #define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040)
647 #define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080)
648 #define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100)
649 #define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200)
650 #define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400)
651 #define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800)
652 #define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000)
653 #define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000)
654 #define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000)
655 #define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000)
656
657 /*
658 * SEC_CSR1: Shared key table security mode register.
659 */
660 #define SEC_CSR1 0x30a4
661 #define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007)
662 #define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070)
663 #define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700)
664 #define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000)
665 #define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000)
666 #define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000)
667 #define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000)
668 #define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000)
669
670 /*
671 * Pairwise key table valid bitmap registers.
672 * SEC_CSR2: pairwise key table valid bitmap 0.
673 * SEC_CSR3: pairwise key table valid bitmap 1.
674 */
675 #define SEC_CSR2 0x30a8
676 #define SEC_CSR3 0x30ac
677
678 /*
679 * SEC_CSR4: Pairwise key table lookup control.
680 */
681 #define SEC_CSR4 0x30b0
682 #define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001)
683 #define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002)
684 #define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004)
685 #define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008)
686
687 /*
688 * SEC_CSR5: shared key table security mode register.
689 */
690 #define SEC_CSR5 0x30b4
691 #define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007)
692 #define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070)
693 #define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700)
694 #define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000)
695 #define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000)
696 #define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000)
697 #define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000)
698 #define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000)
699
700 /*
701 * STA control registers.
702 */
703
704 /*
705 * STA_CSR0: RX PLCP error count & RX FCS error count.
706 */
707 #define STA_CSR0 0x30c0
708 #define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff)
709 #define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000)
710
711 /*
712 * STA_CSR1: RX False CCA count & RX LONG frame count.
713 */
714 #define STA_CSR1 0x30c4
715 #define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff)
716 #define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000)
717
718 /*
719 * STA_CSR2: TX Beacon count and RX FIFO overflow count.
720 */
721 #define STA_CSR2 0x30c8
722 #define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff)
723 #define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000)
724
725 /*
726 * STA_CSR3: TX Beacon count.
727 */
728 #define STA_CSR3 0x30cc
729 #define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff)
730
731 /*
732 * STA_CSR4: TX Result status register.
733 * VALID: 1:This register contains a valid TX result.
734 */
735 #define STA_CSR4 0x30d0
736 #define STA_CSR4_VALID FIELD32(0x00000001)
737 #define STA_CSR4_TX_RESULT FIELD32(0x0000000e)
738 #define STA_CSR4_RETRY_COUNT FIELD32(0x000000f0)
739 #define STA_CSR4_PID_SUBTYPE FIELD32(0x00001f00)
740 #define STA_CSR4_PID_TYPE FIELD32(0x0000e000)
741 #define STA_CSR4_TXRATE FIELD32(0x000f0000)
742
743 /*
744 * QOS control registers.
745 */
746
747 /*
748 * QOS_CSR0: TXOP holder MAC address register.
749 */
750 #define QOS_CSR0 0x30e0
751 #define QOS_CSR0_BYTE0 FIELD32(0x000000ff)
752 #define QOS_CSR0_BYTE1 FIELD32(0x0000ff00)
753 #define QOS_CSR0_BYTE2 FIELD32(0x00ff0000)
754 #define QOS_CSR0_BYTE3 FIELD32(0xff000000)
755
756 /*
757 * QOS_CSR1: TXOP holder MAC address register.
758 */
759 #define QOS_CSR1 0x30e4
760 #define QOS_CSR1_BYTE4 FIELD32(0x000000ff)
761 #define QOS_CSR1_BYTE5 FIELD32(0x0000ff00)
762
763 /*
764 * QOS_CSR2: TXOP holder timeout register.
765 */
766 #define QOS_CSR2 0x30e8
767
768 /*
769 * RX QOS-CFPOLL MAC address register.
770 * QOS_CSR3: RX QOS-CFPOLL MAC address 0.
771 * QOS_CSR4: RX QOS-CFPOLL MAC address 1.
772 */
773 #define QOS_CSR3 0x30ec
774 #define QOS_CSR4 0x30f0
775
776 /*
777 * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL.
778 */
779 #define QOS_CSR5 0x30f4
780
781 /*
782 * Host DMA registers.
783 */
784
785 /*
786 * AC0_BASE_CSR: AC_VO base address.
787 */
788 #define AC0_BASE_CSR 0x3400
789 #define AC0_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
790
791 /*
792 * AC1_BASE_CSR: AC_VI base address.
793 */
794 #define AC1_BASE_CSR 0x3404
795 #define AC1_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
796
797 /*
798 * AC2_BASE_CSR: AC_BE base address.
799 */
800 #define AC2_BASE_CSR 0x3408
801 #define AC2_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
802
803 /*
804 * AC3_BASE_CSR: AC_BK base address.
805 */
806 #define AC3_BASE_CSR 0x340c
807 #define AC3_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
808
809 /*
810 * MGMT_BASE_CSR: MGMT ring base address.
811 */
812 #define MGMT_BASE_CSR 0x3410
813 #define MGMT_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
814
815 /*
816 * TX_RING_CSR0: TX Ring size for AC_VO, AC_VI, AC_BE, AC_BK.
817 */
818 #define TX_RING_CSR0 0x3418
819 #define TX_RING_CSR0_AC0_RING_SIZE FIELD32(0x000000ff)
820 #define TX_RING_CSR0_AC1_RING_SIZE FIELD32(0x0000ff00)
821 #define TX_RING_CSR0_AC2_RING_SIZE FIELD32(0x00ff0000)
822 #define TX_RING_CSR0_AC3_RING_SIZE FIELD32(0xff000000)
823
824 /*
825 * TX_RING_CSR1: TX Ring size for MGMT Ring, HCCA Ring
826 * TXD_SIZE: In unit of 32-bit.
827 */
828 #define TX_RING_CSR1 0x341c
829 #define TX_RING_CSR1_MGMT_RING_SIZE FIELD32(0x000000ff)
830 #define TX_RING_CSR1_HCCA_RING_SIZE FIELD32(0x0000ff00)
831 #define TX_RING_CSR1_TXD_SIZE FIELD32(0x003f0000)
832
833 /*
834 * AIFSN_CSR: AIFSN for each EDCA AC.
835 * AIFSN0: For AC_VO.
836 * AIFSN1: For AC_VI.
837 * AIFSN2: For AC_BE.
838 * AIFSN3: For AC_BK.
839 */
840 #define AIFSN_CSR 0x3420
841 #define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f)
842 #define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0)
843 #define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00)
844 #define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000)
845
846 /*
847 * CWMIN_CSR: CWmin for each EDCA AC.
848 * CWMIN0: For AC_VO.
849 * CWMIN1: For AC_VI.
850 * CWMIN2: For AC_BE.
851 * CWMIN3: For AC_BK.
852 */
853 #define CWMIN_CSR 0x3424
854 #define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f)
855 #define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0)
856 #define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00)
857 #define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000)
858
859 /*
860 * CWMAX_CSR: CWmax for each EDCA AC.
861 * CWMAX0: For AC_VO.
862 * CWMAX1: For AC_VI.
863 * CWMAX2: For AC_BE.
864 * CWMAX3: For AC_BK.
865 */
866 #define CWMAX_CSR 0x3428
867 #define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f)
868 #define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0)
869 #define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00)
870 #define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000)
871
872 /*
873 * TX_DMA_DST_CSR: TX DMA destination
874 * 0: TX ring0, 1: TX ring1, 2: TX ring2 3: invalid
875 */
876 #define TX_DMA_DST_CSR 0x342c
877 #define TX_DMA_DST_CSR_DEST_AC0 FIELD32(0x00000003)
878 #define TX_DMA_DST_CSR_DEST_AC1 FIELD32(0x0000000c)
879 #define TX_DMA_DST_CSR_DEST_AC2 FIELD32(0x00000030)
880 #define TX_DMA_DST_CSR_DEST_AC3 FIELD32(0x000000c0)
881 #define TX_DMA_DST_CSR_DEST_MGMT FIELD32(0x00000300)
882
883 /*
884 * TX_CNTL_CSR: KICK/Abort TX.
885 * KICK_TX_AC0: For AC_VO.
886 * KICK_TX_AC1: For AC_VI.
887 * KICK_TX_AC2: For AC_BE.
888 * KICK_TX_AC3: For AC_BK.
889 * ABORT_TX_AC0: For AC_VO.
890 * ABORT_TX_AC1: For AC_VI.
891 * ABORT_TX_AC2: For AC_BE.
892 * ABORT_TX_AC3: For AC_BK.
893 */
894 #define TX_CNTL_CSR 0x3430
895 #define TX_CNTL_CSR_KICK_TX_AC0 FIELD32(0x00000001)
896 #define TX_CNTL_CSR_KICK_TX_AC1 FIELD32(0x00000002)
897 #define TX_CNTL_CSR_KICK_TX_AC2 FIELD32(0x00000004)
898 #define TX_CNTL_CSR_KICK_TX_AC3 FIELD32(0x00000008)
899 #define TX_CNTL_CSR_KICK_TX_MGMT FIELD32(0x00000010)
900 #define TX_CNTL_CSR_ABORT_TX_AC0 FIELD32(0x00010000)
901 #define TX_CNTL_CSR_ABORT_TX_AC1 FIELD32(0x00020000)
902 #define TX_CNTL_CSR_ABORT_TX_AC2 FIELD32(0x00040000)
903 #define TX_CNTL_CSR_ABORT_TX_AC3 FIELD32(0x00080000)
904 #define TX_CNTL_CSR_ABORT_TX_MGMT FIELD32(0x00100000)
905
906 /*
907 * LOAD_TX_RING_CSR: Load RX desriptor
908 */
909 #define LOAD_TX_RING_CSR 0x3434
910 #define LOAD_TX_RING_CSR_LOAD_TXD_AC0 FIELD32(0x00000001)
911 #define LOAD_TX_RING_CSR_LOAD_TXD_AC1 FIELD32(0x00000002)
912 #define LOAD_TX_RING_CSR_LOAD_TXD_AC2 FIELD32(0x00000004)
913 #define LOAD_TX_RING_CSR_LOAD_TXD_AC3 FIELD32(0x00000008)
914 #define LOAD_TX_RING_CSR_LOAD_TXD_MGMT FIELD32(0x00000010)
915
916 /*
917 * Several read-only registers, for debugging.
918 */
919 #define AC0_TXPTR_CSR 0x3438
920 #define AC1_TXPTR_CSR 0x343c
921 #define AC2_TXPTR_CSR 0x3440
922 #define AC3_TXPTR_CSR 0x3444
923 #define MGMT_TXPTR_CSR 0x3448
924
925 /*
926 * RX_BASE_CSR
927 */
928 #define RX_BASE_CSR 0x3450
929 #define RX_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
930
931 /*
932 * RX_RING_CSR.
933 * RXD_SIZE: In unit of 32-bit.
934 */
935 #define RX_RING_CSR 0x3454
936 #define RX_RING_CSR_RING_SIZE FIELD32(0x000000ff)
937 #define RX_RING_CSR_RXD_SIZE FIELD32(0x00003f00)
938 #define RX_RING_CSR_RXD_WRITEBACK_SIZE FIELD32(0x00070000)
939
940 /*
941 * RX_CNTL_CSR
942 */
943 #define RX_CNTL_CSR 0x3458
944 #define RX_CNTL_CSR_ENABLE_RX_DMA FIELD32(0x00000001)
945 #define RX_CNTL_CSR_LOAD_RXD FIELD32(0x00000002)
946
947 /*
948 * RXPTR_CSR: Read-only, for debugging.
949 */
950 #define RXPTR_CSR 0x345c
951
952 /*
953 * PCI_CFG_CSR
954 */
955 #define PCI_CFG_CSR 0x3460
956
957 /*
958 * BUF_FORMAT_CSR
959 */
960 #define BUF_FORMAT_CSR 0x3464
961
962 /*
963 * INT_SOURCE_CSR: Interrupt source register.
964 * Write one to clear corresponding bit.
965 */
966 #define INT_SOURCE_CSR 0x3468
967 #define INT_SOURCE_CSR_TXDONE FIELD32(0x00000001)
968 #define INT_SOURCE_CSR_RXDONE FIELD32(0x00000002)
969 #define INT_SOURCE_CSR_BEACON_DONE FIELD32(0x00000004)
970 #define INT_SOURCE_CSR_TX_ABORT_DONE FIELD32(0x00000010)
971 #define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00010000)
972 #define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00020000)
973 #define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00040000)
974 #define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00080000)
975 #define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00100000)
976 #define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00200000)
977
978 /*
979 * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
980 * MITIGATION_PERIOD: Interrupt mitigation in unit of 32 PCI clock.
981 */
982 #define INT_MASK_CSR 0x346c
983 #define INT_MASK_CSR_TXDONE FIELD32(0x00000001)
984 #define INT_MASK_CSR_RXDONE FIELD32(0x00000002)
985 #define INT_MASK_CSR_BEACON_DONE FIELD32(0x00000004)
986 #define INT_MASK_CSR_TX_ABORT_DONE FIELD32(0x00000010)
987 #define INT_MASK_CSR_ENABLE_MITIGATION FIELD32(0x00000080)
988 #define INT_MASK_CSR_MITIGATION_PERIOD FIELD32(0x0000ff00)
989 #define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00010000)
990 #define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00020000)
991 #define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00040000)
992 #define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00080000)
993 #define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00100000)
994 #define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00200000)
995
996 /*
997 * E2PROM_CSR: EEPROM control register.
998 * RELOAD: Write 1 to reload eeprom content.
999 * TYPE_93C46: 1: 93c46, 0:93c66.
1000 * LOAD_STATUS: 1:loading, 0:done.
1001 */
1002 #define E2PROM_CSR 0x3470
1003 #define E2PROM_CSR_RELOAD FIELD32(0x00000001)
1004 #define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000002)
1005 #define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000004)
1006 #define E2PROM_CSR_DATA_IN FIELD32(0x00000008)
1007 #define E2PROM_CSR_DATA_OUT FIELD32(0x00000010)
1008 #define E2PROM_CSR_TYPE_93C46 FIELD32(0x00000020)
1009 #define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
1010
1011 /*
1012 * AC_TXOP_CSR0: AC_VO/AC_VI TXOP register.
1013 * AC0_TX_OP: For AC_VO, in unit of 32us.
1014 * AC1_TX_OP: For AC_VI, in unit of 32us.
1015 */
1016 #define AC_TXOP_CSR0 0x3474
1017 #define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff)
1018 #define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000)
1019
1020 /*
1021 * AC_TXOP_CSR1: AC_BE/AC_BK TXOP register.
1022 * AC2_TX_OP: For AC_BE, in unit of 32us.
1023 * AC3_TX_OP: For AC_BK, in unit of 32us.
1024 */
1025 #define AC_TXOP_CSR1 0x3478
1026 #define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff)
1027 #define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000)
1028
1029 /*
1030 * DMA_STATUS_CSR
1031 */
1032 #define DMA_STATUS_CSR 0x3480
1033
1034 /*
1035 * TEST_MODE_CSR
1036 */
1037 #define TEST_MODE_CSR 0x3484
1038
1039 /*
1040 * UART0_TX_CSR
1041 */
1042 #define UART0_TX_CSR 0x3488
1043
1044 /*
1045 * UART0_RX_CSR
1046 */
1047 #define UART0_RX_CSR 0x348c
1048
1049 /*
1050 * UART0_FRAME_CSR
1051 */
1052 #define UART0_FRAME_CSR 0x3490
1053
1054 /*
1055 * UART0_BUFFER_CSR
1056 */
1057 #define UART0_BUFFER_CSR 0x3494
1058
1059 /*
1060 * IO_CNTL_CSR
1061 * RF_PS: Set RF interface value to power save
1062 */
1063 #define IO_CNTL_CSR 0x3498
1064 #define IO_CNTL_CSR_RF_PS FIELD32(0x00000004)
1065
1066 /*
1067 * UART_INT_SOURCE_CSR
1068 */
1069 #define UART_INT_SOURCE_CSR 0x34a8
1070
1071 /*
1072 * UART_INT_MASK_CSR
1073 */
1074 #define UART_INT_MASK_CSR 0x34ac
1075
1076 /*
1077 * PBF_QUEUE_CSR
1078 */
1079 #define PBF_QUEUE_CSR 0x34b0
1080
1081 /*
1082 * Firmware DMA registers.
1083 * Firmware DMA registers are dedicated for MCU usage
1084 * and should not be touched by host driver.
1085 * Therefore we skip the definition of these registers.
1086 */
1087 #define FW_TX_BASE_CSR 0x34c0
1088 #define FW_TX_START_CSR 0x34c4
1089 #define FW_TX_LAST_CSR 0x34c8
1090 #define FW_MODE_CNTL_CSR 0x34cc
1091 #define FW_TXPTR_CSR 0x34d0
1092
1093 /*
1094 * 8051 firmware image.
1095 */
1096 #define FIRMWARE_RT2561 "rt2561.bin"
1097 #define FIRMWARE_RT2561s "rt2561s.bin"
1098 #define FIRMWARE_RT2661 "rt2661.bin"
1099 #define FIRMWARE_IMAGE_BASE 0x4000
1100
1101 /*
1102 * BBP registers.
1103 * The wordsize of the BBP is 8 bits.
1104 */
1105
1106 /*
1107 * R2
1108 */
1109 #define BBP_R2_BG_MODE FIELD8(0x20)
1110
1111 /*
1112 * R3
1113 */
1114 #define BBP_R3_SMART_MODE FIELD8(0x01)
1115
1116 /*
1117 * R4: RX antenna control
1118 * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529)
1119 */
1120
1121 /*
1122 * ANTENNA_CONTROL semantics (guessed):
1123 * 0x1: Software controlled antenna switching (fixed or SW diversity)
1124 * 0x2: Hardware diversity.
1125 */
1126 #define BBP_R4_RX_ANTENNA_CONTROL FIELD8(0x03)
1127 #define BBP_R4_RX_FRAME_END FIELD8(0x20)
1128
1129 /*
1130 * R77
1131 */
1132 #define BBP_R77_RX_ANTENNA FIELD8(0x03)
1133
1134 /*
1135 * RF registers
1136 */
1137
1138 /*
1139 * RF 3
1140 */
1141 #define RF3_TXPOWER FIELD32(0x00003e00)
1142
1143 /*
1144 * RF 4
1145 */
1146 #define RF4_FREQ_OFFSET FIELD32(0x0003f000)
1147
1148 /*
1149 * EEPROM content.
1150 * The wordsize of the EEPROM is 16 bits.
1151 */
1152
1153 /*
1154 * HW MAC address.
1155 */
1156 #define EEPROM_MAC_ADDR_0 0x0002
1157 #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
1158 #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
1159 #define EEPROM_MAC_ADDR1 0x0003
1160 #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
1161 #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
1162 #define EEPROM_MAC_ADDR_2 0x0004
1163 #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
1164 #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
1165
1166 /*
1167 * EEPROM antenna.
1168 * ANTENNA_NUM: Number of antenna's.
1169 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1170 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1171 * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only.
1172 * DYN_TXAGC: Dynamic TX AGC control.
1173 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
1174 * RF_TYPE: Rf_type of this adapter.
1175 */
1176 #define EEPROM_ANTENNA 0x0010
1177 #define EEPROM_ANTENNA_NUM FIELD16(0x0003)
1178 #define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
1179 #define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
1180 #define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040)
1181 #define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
1182 #define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
1183 #define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
1184
1185 /*
1186 * EEPROM NIC config.
1187 * ENABLE_DIVERSITY: 1:enable, 0:disable.
1188 * EXTERNAL_LNA_BG: External LNA enable for 2.4G.
1189 * CARDBUS_ACCEL: 0:enable, 1:disable.
1190 * EXTERNAL_LNA_A: External LNA enable for 5G.
1191 */
1192 #define EEPROM_NIC 0x0011
1193 #define EEPROM_NIC_ENABLE_DIVERSITY FIELD16(0x0001)
1194 #define EEPROM_NIC_TX_DIVERSITY FIELD16(0x0002)
1195 #define EEPROM_NIC_RX_FIXED FIELD16(0x0004)
1196 #define EEPROM_NIC_TX_FIXED FIELD16(0x0008)
1197 #define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0010)
1198 #define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0020)
1199 #define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0040)
1200
1201 /*
1202 * EEPROM geography.
1203 * GEO_A: Default geographical setting for 5GHz band
1204 * GEO: Default geographical setting.
1205 */
1206 #define EEPROM_GEOGRAPHY 0x0012
1207 #define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff)
1208 #define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00)
1209
1210 /*
1211 * EEPROM BBP.
1212 */
1213 #define EEPROM_BBP_START 0x0013
1214 #define EEPROM_BBP_SIZE 16
1215 #define EEPROM_BBP_VALUE FIELD16(0x00ff)
1216 #define EEPROM_BBP_REG_ID FIELD16(0xff00)
1217
1218 /*
1219 * EEPROM TXPOWER 802.11G
1220 */
1221 #define EEPROM_TXPOWER_G_START 0x0023
1222 #define EEPROM_TXPOWER_G_SIZE 7
1223 #define EEPROM_TXPOWER_G_1 FIELD16(0x00ff)
1224 #define EEPROM_TXPOWER_G_2 FIELD16(0xff00)
1225
1226 /*
1227 * EEPROM Frequency
1228 */
1229 #define EEPROM_FREQ 0x002f
1230 #define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
1231 #define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00)
1232 #define EEPROM_FREQ_SEQ FIELD16(0x0300)
1233
1234 /*
1235 * EEPROM LED.
1236 * POLARITY_RDY_G: Polarity RDY_G setting.
1237 * POLARITY_RDY_A: Polarity RDY_A setting.
1238 * POLARITY_ACT: Polarity ACT setting.
1239 * POLARITY_GPIO_0: Polarity GPIO0 setting.
1240 * POLARITY_GPIO_1: Polarity GPIO1 setting.
1241 * POLARITY_GPIO_2: Polarity GPIO2 setting.
1242 * POLARITY_GPIO_3: Polarity GPIO3 setting.
1243 * POLARITY_GPIO_4: Polarity GPIO4 setting.
1244 * LED_MODE: Led mode.
1245 */
1246 #define EEPROM_LED 0x0030
1247 #define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001)
1248 #define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
1249 #define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
1250 #define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
1251 #define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
1252 #define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
1253 #define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
1254 #define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
1255 #define EEPROM_LED_LED_MODE FIELD16(0x1f00)
1256
1257 /*
1258 * EEPROM TXPOWER 802.11A
1259 */
1260 #define EEPROM_TXPOWER_A_START 0x0031
1261 #define EEPROM_TXPOWER_A_SIZE 12
1262 #define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
1263 #define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
1264
1265 /*
1266 * EEPROM RSSI offset 802.11BG
1267 */
1268 #define EEPROM_RSSI_OFFSET_BG 0x004d
1269 #define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff)
1270 #define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00)
1271
1272 /*
1273 * EEPROM RSSI offset 802.11A
1274 */
1275 #define EEPROM_RSSI_OFFSET_A 0x004e
1276 #define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff)
1277 #define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00)
1278
1279 /*
1280 * MCU mailbox commands.
1281 */
1282 #define MCU_SLEEP 0x30
1283 #define MCU_WAKEUP 0x31
1284 #define MCU_LED 0x50
1285 #define MCU_LED_STRENGTH 0x52
1286
1287 /*
1288 * DMA descriptor defines.
1289 */
1290 #define TXD_DESC_SIZE (16 * sizeof(__le32))
1291 #define TXINFO_SIZE (6 * sizeof(__le32))
1292 #define RXD_DESC_SIZE (16 * sizeof(__le32))
1293
1294 /*
1295 * TX descriptor format for TX, PRIO and Beacon Ring.
1296 */
1297
1298 /*
1299 * Word0
1300 * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used.
1301 * KEY_TABLE: Use per-client pairwise KEY table.
1302 * KEY_INDEX:
1303 * Key index (0~31) to the pairwise KEY table.
1304 * 0~3 to shared KEY table 0 (BSS0).
1305 * 4~7 to shared KEY table 1 (BSS1).
1306 * 8~11 to shared KEY table 2 (BSS2).
1307 * 12~15 to shared KEY table 3 (BSS3).
1308 * BURST: Next frame belongs to same "burst" event.
1309 */
1310 #define TXD_W0_OWNER_NIC FIELD32(0x00000001)
1311 #define TXD_W0_VALID FIELD32(0x00000002)
1312 #define TXD_W0_MORE_FRAG FIELD32(0x00000004)
1313 #define TXD_W0_ACK FIELD32(0x00000008)
1314 #define TXD_W0_TIMESTAMP FIELD32(0x00000010)
1315 #define TXD_W0_OFDM FIELD32(0x00000020)
1316 #define TXD_W0_IFS FIELD32(0x00000040)
1317 #define TXD_W0_RETRY_MODE FIELD32(0x00000080)
1318 #define TXD_W0_TKIP_MIC FIELD32(0x00000100)
1319 #define TXD_W0_KEY_TABLE FIELD32(0x00000200)
1320 #define TXD_W0_KEY_INDEX FIELD32(0x0000fc00)
1321 #define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1322 #define TXD_W0_BURST FIELD32(0x10000000)
1323 #define TXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1324
1325 /*
1326 * Word1
1327 * HOST_Q_ID: EDCA/HCCA queue ID.
1328 * HW_SEQUENCE: MAC overwrites the frame sequence number.
1329 * BUFFER_COUNT: Number of buffers in this TXD.
1330 */
1331 #define TXD_W1_HOST_Q_ID FIELD32(0x0000000f)
1332 #define TXD_W1_AIFSN FIELD32(0x000000f0)
1333 #define TXD_W1_CWMIN FIELD32(0x00000f00)
1334 #define TXD_W1_CWMAX FIELD32(0x0000f000)
1335 #define TXD_W1_IV_OFFSET FIELD32(0x003f0000)
1336 #define TXD_W1_PIGGY_BACK FIELD32(0x01000000)
1337 #define TXD_W1_HW_SEQUENCE FIELD32(0x10000000)
1338 #define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000)
1339
1340 /*
1341 * Word2: PLCP information
1342 */
1343 #define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff)
1344 #define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00)
1345 #define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
1346 #define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000)
1347
1348 /*
1349 * Word3
1350 */
1351 #define TXD_W3_IV FIELD32(0xffffffff)
1352
1353 /*
1354 * Word4
1355 */
1356 #define TXD_W4_EIV FIELD32(0xffffffff)
1357
1358 /*
1359 * Word5
1360 * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field).
1361 * TXD_W5_PID_SUBTYPE: Driver assigned packet ID index for txdone handler.
1362 * TXD_W5_PID_TYPE: Driver assigned packet ID type for txdone handler.
1363 * WAITING_DMA_DONE_INT: TXD been filled with data
1364 * and waiting for TxDoneISR housekeeping.
1365 */
1366 #define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff)
1367 #define TXD_W5_PID_SUBTYPE FIELD32(0x00001f00)
1368 #define TXD_W5_PID_TYPE FIELD32(0x0000e000)
1369 #define TXD_W5_TX_POWER FIELD32(0x00ff0000)
1370 #define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000)
1371
1372 /*
1373 * the above 24-byte is called TXINFO and will be DMAed to MAC block
1374 * through TXFIFO. MAC block use this TXINFO to control the transmission
1375 * behavior of this frame.
1376 * The following fields are not used by MAC block.
1377 * They are used by DMA block and HOST driver only.
1378 * Once a frame has been DMA to ASIC, all the following fields are useless
1379 * to ASIC.
1380 */
1381
1382 /*
1383 * Word6-10: Buffer physical address
1384 */
1385 #define TXD_W6_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1386 #define TXD_W7_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1387 #define TXD_W8_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1388 #define TXD_W9_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1389 #define TXD_W10_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1390
1391 /*
1392 * Word11-13: Buffer length
1393 */
1394 #define TXD_W11_BUFFER_LENGTH0 FIELD32(0x00000fff)
1395 #define TXD_W11_BUFFER_LENGTH1 FIELD32(0x0fff0000)
1396 #define TXD_W12_BUFFER_LENGTH2 FIELD32(0x00000fff)
1397 #define TXD_W12_BUFFER_LENGTH3 FIELD32(0x0fff0000)
1398 #define TXD_W13_BUFFER_LENGTH4 FIELD32(0x00000fff)
1399
1400 /*
1401 * Word14
1402 */
1403 #define TXD_W14_SK_BUFFER FIELD32(0xffffffff)
1404
1405 /*
1406 * Word15
1407 */
1408 #define TXD_W15_NEXT_SK_BUFFER FIELD32(0xffffffff)
1409
1410 /*
1411 * RX descriptor format for RX Ring.
1412 */
1413
1414 /*
1415 * Word0
1416 * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key.
1417 * KEY_INDEX: Decryption key actually used.
1418 */
1419 #define RXD_W0_OWNER_NIC FIELD32(0x00000001)
1420 #define RXD_W0_DROP FIELD32(0x00000002)
1421 #define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004)
1422 #define RXD_W0_MULTICAST FIELD32(0x00000008)
1423 #define RXD_W0_BROADCAST FIELD32(0x00000010)
1424 #define RXD_W0_MY_BSS FIELD32(0x00000020)
1425 #define RXD_W0_CRC_ERROR FIELD32(0x00000040)
1426 #define RXD_W0_OFDM FIELD32(0x00000080)
1427 #define RXD_W0_CIPHER_ERROR FIELD32(0x00000300)
1428 #define RXD_W0_KEY_INDEX FIELD32(0x0000fc00)
1429 #define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1430 #define RXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1431
1432 /*
1433 * Word1
1434 * SIGNAL: RX raw data rate reported by BBP.
1435 */
1436 #define RXD_W1_SIGNAL FIELD32(0x000000ff)
1437 #define RXD_W1_RSSI_AGC FIELD32(0x00001f00)
1438 #define RXD_W1_RSSI_LNA FIELD32(0x00006000)
1439 #define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000)
1440
1441 /*
1442 * Word2
1443 * IV: Received IV of originally encrypted.
1444 */
1445 #define RXD_W2_IV FIELD32(0xffffffff)
1446
1447 /*
1448 * Word3
1449 * EIV: Received EIV of originally encrypted.
1450 */
1451 #define RXD_W3_EIV FIELD32(0xffffffff)
1452
1453 /*
1454 * Word4
1455 * ICV: Received ICV of originally encrypted.
1456 * NOTE: This is a guess, the official definition is "reserved"
1457 */
1458 #define RXD_W4_ICV FIELD32(0xffffffff)
1459
1460 /*
1461 * the above 20-byte is called RXINFO and will be DMAed to MAC RX block
1462 * and passed to the HOST driver.
1463 * The following fields are for DMA block and HOST usage only.
1464 * Can't be touched by ASIC MAC block.
1465 */
1466
1467 /*
1468 * Word5
1469 */
1470 #define RXD_W5_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1471
1472 /*
1473 * Word6-15: Reserved
1474 */
1475 #define RXD_W6_RESERVED FIELD32(0xffffffff)
1476 #define RXD_W7_RESERVED FIELD32(0xffffffff)
1477 #define RXD_W8_RESERVED FIELD32(0xffffffff)
1478 #define RXD_W9_RESERVED FIELD32(0xffffffff)
1479 #define RXD_W10_RESERVED FIELD32(0xffffffff)
1480 #define RXD_W11_RESERVED FIELD32(0xffffffff)
1481 #define RXD_W12_RESERVED FIELD32(0xffffffff)
1482 #define RXD_W13_RESERVED FIELD32(0xffffffff)
1483 #define RXD_W14_RESERVED FIELD32(0xffffffff)
1484 #define RXD_W15_RESERVED FIELD32(0xffffffff)
1485
1486 /*
1487 * Macros for converting txpower from EEPROM to mac80211 value
1488 * and from mac80211 value to register value.
1489 */
1490 #define MIN_TXPOWER 0
1491 #define MAX_TXPOWER 31
1492 #define DEFAULT_TXPOWER 24
1493
1494 #define TXPOWER_FROM_DEV(__txpower) \
1495 (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
1496
1497 #define TXPOWER_TO_DEV(__txpower) \
1498 clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
1499
1500 #endif /* RT61PCI_H */
Linux with added FPC-III support