dt-bindings: mtd: ingenic: Use standard ecc-engine property
[linux/fpc-iii.git] / drivers / usb / host / ohci-nxp.c
blobf5f532601092a5c024adb88dc817d1a0ae3ef0dd
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * driver for NXP USB Host devices
5 * Currently supported OHCI host devices:
6 * - NXP LPC32xx
8 * Authors: Dmitry Chigirev <source@mvista.com>
9 * Vitaly Wool <vitalywool@gmail.com>
11 * register initialization is based on code examples provided by Philips
12 * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
14 * NOTE: This driver does not have suspend/resume functionality
15 * This driver is intended for engineering development purposes only
17 * 2005-2006 (c) MontaVista Software, Inc.
19 #include <linux/clk.h>
20 #include <linux/dma-mapping.h>
21 #include <linux/io.h>
22 #include <linux/i2c.h>
23 #include <linux/module.h>
24 #include <linux/of.h>
25 #include <linux/platform_device.h>
26 #include <linux/usb/isp1301.h>
27 #include <linux/usb.h>
28 #include <linux/usb/hcd.h>
30 #include "ohci.h"
32 #include <mach/hardware.h>
34 #define USB_CONFIG_BASE 0x31020000
35 #define USB_OTG_STAT_CONTROL IO_ADDRESS(USB_CONFIG_BASE + 0x110)
37 /* USB_OTG_STAT_CONTROL bit defines */
38 #define TRANSPARENT_I2C_EN (1 << 7)
39 #define HOST_EN (1 << 0)
41 /* On LPC32xx, those are undefined */
42 #ifndef start_int_set_falling_edge
43 #define start_int_set_falling_edge(irq)
44 #define start_int_set_rising_edge(irq)
45 #define start_int_ack(irq)
46 #define start_int_mask(irq)
47 #define start_int_umask(irq)
48 #endif
50 #define DRIVER_DESC "OHCI NXP driver"
52 static const char hcd_name[] = "ohci-nxp";
53 static struct hc_driver __read_mostly ohci_nxp_hc_driver;
55 static struct i2c_client *isp1301_i2c_client;
57 static struct clk *usb_host_clk;
59 static void isp1301_configure_lpc32xx(void)
61 /* LPC32XX only supports DAT_SE0 USB mode */
62 /* This sequence is important */
64 /* Disable transparent UART mode first */
65 i2c_smbus_write_byte_data(isp1301_i2c_client,
66 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
67 MC1_UART_EN);
68 i2c_smbus_write_byte_data(isp1301_i2c_client,
69 (ISP1301_I2C_MODE_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
70 ~MC1_SPEED_REG);
71 i2c_smbus_write_byte_data(isp1301_i2c_client,
72 ISP1301_I2C_MODE_CONTROL_1, MC1_SPEED_REG);
73 i2c_smbus_write_byte_data(isp1301_i2c_client,
74 (ISP1301_I2C_MODE_CONTROL_2 | ISP1301_I2C_REG_CLEAR_ADDR),
75 ~0);
76 i2c_smbus_write_byte_data(isp1301_i2c_client,
77 ISP1301_I2C_MODE_CONTROL_2,
78 (MC2_BI_DI | MC2_PSW_EN | MC2_SPD_SUSP_CTRL));
79 i2c_smbus_write_byte_data(isp1301_i2c_client,
80 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR), ~0);
81 i2c_smbus_write_byte_data(isp1301_i2c_client,
82 ISP1301_I2C_MODE_CONTROL_1, MC1_DAT_SE0);
83 i2c_smbus_write_byte_data(isp1301_i2c_client,
84 ISP1301_I2C_OTG_CONTROL_1,
85 (OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN));
86 i2c_smbus_write_byte_data(isp1301_i2c_client,
87 (ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR),
88 (OTG1_DM_PULLUP | OTG1_DP_PULLUP));
89 i2c_smbus_write_byte_data(isp1301_i2c_client,
90 ISP1301_I2C_INTERRUPT_LATCH | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
91 i2c_smbus_write_byte_data(isp1301_i2c_client,
92 ISP1301_I2C_INTERRUPT_FALLING | ISP1301_I2C_REG_CLEAR_ADDR,
93 ~0);
94 i2c_smbus_write_byte_data(isp1301_i2c_client,
95 ISP1301_I2C_INTERRUPT_RISING | ISP1301_I2C_REG_CLEAR_ADDR, ~0);
97 printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n",
98 i2c_smbus_read_word_data(isp1301_i2c_client, 0x00));
99 printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
100 i2c_smbus_read_word_data(isp1301_i2c_client, 0x02));
101 printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
102 i2c_smbus_read_word_data(isp1301_i2c_client, 0x14));
105 static void isp1301_configure(void)
107 isp1301_configure_lpc32xx();
110 static inline void isp1301_vbus_on(void)
112 i2c_smbus_write_byte_data(isp1301_i2c_client, ISP1301_I2C_OTG_CONTROL_1,
113 OTG1_VBUS_DRV);
116 static inline void isp1301_vbus_off(void)
118 i2c_smbus_write_byte_data(isp1301_i2c_client,
119 ISP1301_I2C_OTG_CONTROL_1 | ISP1301_I2C_REG_CLEAR_ADDR,
120 OTG1_VBUS_DRV);
123 static void ohci_nxp_start_hc(void)
125 unsigned long tmp = __raw_readl(USB_OTG_STAT_CONTROL) | HOST_EN;
127 __raw_writel(tmp, USB_OTG_STAT_CONTROL);
128 isp1301_vbus_on();
131 static void ohci_nxp_stop_hc(void)
133 unsigned long tmp;
135 isp1301_vbus_off();
136 tmp = __raw_readl(USB_OTG_STAT_CONTROL) & ~HOST_EN;
137 __raw_writel(tmp, USB_OTG_STAT_CONTROL);
140 static int ohci_hcd_nxp_probe(struct platform_device *pdev)
142 struct usb_hcd *hcd = 0;
143 const struct hc_driver *driver = &ohci_nxp_hc_driver;
144 struct resource *res;
145 int ret = 0, irq;
146 struct device_node *isp1301_node;
148 if (pdev->dev.of_node) {
149 isp1301_node = of_parse_phandle(pdev->dev.of_node,
150 "transceiver", 0);
151 } else {
152 isp1301_node = NULL;
155 isp1301_i2c_client = isp1301_get_client(isp1301_node);
156 if (!isp1301_i2c_client)
157 return -EPROBE_DEFER;
159 ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
160 if (ret)
161 goto fail_disable;
163 dev_dbg(&pdev->dev, "%s: " DRIVER_DESC " (nxp)\n", hcd_name);
164 if (usb_disabled()) {
165 dev_err(&pdev->dev, "USB is disabled\n");
166 ret = -ENODEV;
167 goto fail_disable;
170 /* Enable USB host clock */
171 usb_host_clk = devm_clk_get(&pdev->dev, NULL);
172 if (IS_ERR(usb_host_clk)) {
173 dev_err(&pdev->dev, "failed to acquire USB OHCI clock\n");
174 ret = PTR_ERR(usb_host_clk);
175 goto fail_disable;
178 ret = clk_prepare_enable(usb_host_clk);
179 if (ret < 0) {
180 dev_err(&pdev->dev, "failed to start USB OHCI clock\n");
181 goto fail_disable;
184 isp1301_configure();
186 hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
187 if (!hcd) {
188 dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
189 ret = -ENOMEM;
190 goto fail_hcd;
193 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
194 hcd->regs = devm_ioremap_resource(&pdev->dev, res);
195 if (IS_ERR(hcd->regs)) {
196 ret = PTR_ERR(hcd->regs);
197 goto fail_resource;
199 hcd->rsrc_start = res->start;
200 hcd->rsrc_len = resource_size(res);
202 irq = platform_get_irq(pdev, 0);
203 if (irq < 0) {
204 ret = -ENXIO;
205 goto fail_resource;
208 ohci_nxp_start_hc();
209 platform_set_drvdata(pdev, hcd);
211 dev_info(&pdev->dev, "at 0x%p, irq %d\n", hcd->regs, hcd->irq);
212 ret = usb_add_hcd(hcd, irq, 0);
213 if (ret == 0) {
214 device_wakeup_enable(hcd->self.controller);
215 return ret;
218 ohci_nxp_stop_hc();
219 fail_resource:
220 usb_put_hcd(hcd);
221 fail_hcd:
222 clk_disable_unprepare(usb_host_clk);
223 fail_disable:
224 isp1301_i2c_client = NULL;
225 return ret;
228 static int ohci_hcd_nxp_remove(struct platform_device *pdev)
230 struct usb_hcd *hcd = platform_get_drvdata(pdev);
232 usb_remove_hcd(hcd);
233 ohci_nxp_stop_hc();
234 usb_put_hcd(hcd);
235 clk_disable_unprepare(usb_host_clk);
236 isp1301_i2c_client = NULL;
238 return 0;
241 /* work with hotplug and coldplug */
242 MODULE_ALIAS("platform:usb-ohci");
244 #ifdef CONFIG_OF
245 static const struct of_device_id ohci_hcd_nxp_match[] = {
246 { .compatible = "nxp,ohci-nxp" },
249 MODULE_DEVICE_TABLE(of, ohci_hcd_nxp_match);
250 #endif
252 static struct platform_driver ohci_hcd_nxp_driver = {
253 .driver = {
254 .name = "usb-ohci",
255 .of_match_table = of_match_ptr(ohci_hcd_nxp_match),
257 .probe = ohci_hcd_nxp_probe,
258 .remove = ohci_hcd_nxp_remove,
261 static int __init ohci_nxp_init(void)
263 if (usb_disabled())
264 return -ENODEV;
266 pr_info("%s: " DRIVER_DESC "\n", hcd_name);
268 ohci_init_driver(&ohci_nxp_hc_driver, NULL);
269 return platform_driver_register(&ohci_hcd_nxp_driver);
271 module_init(ohci_nxp_init);
273 static void __exit ohci_nxp_cleanup(void)
275 platform_driver_unregister(&ohci_hcd_nxp_driver);
277 module_exit(ohci_nxp_cleanup);
279 MODULE_DESCRIPTION(DRIVER_DESC);
280 MODULE_LICENSE("GPL v2");