Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[linux/fpc-iii.git] / drivers / watchdog / coh901327_wdt.c
bloba099b77fc0b91a076302f6657aaf87d4be9ed159
1 /*
2 * coh901327_wdt.c
4 * Copyright (C) 2008-2009 ST-Ericsson AB
5 * License terms: GNU General Public License (GPL) version 2
6 * Watchdog driver for the ST-Ericsson AB COH 901 327 IP core
7 * Author: Linus Walleij <linus.walleij@stericsson.com>
8 */
9 #include <linux/module.h>
10 #include <linux/types.h>
11 #include <linux/watchdog.h>
12 #include <linux/interrupt.h>
13 #include <linux/pm.h>
14 #include <linux/platform_device.h>
15 #include <linux/io.h>
16 #include <linux/bitops.h>
17 #include <linux/clk.h>
18 #include <linux/delay.h>
19 #include <linux/err.h>
21 #define DRV_NAME "WDOG COH 901 327"
24 * COH 901 327 register definitions
27 /* WDOG_FEED Register 32bit (-/W) */
28 #define U300_WDOG_FR 0x00
29 #define U300_WDOG_FR_FEED_RESTART_TIMER 0xFEEDU
30 /* WDOG_TIMEOUT Register 32bit (R/W) */
31 #define U300_WDOG_TR 0x04
32 #define U300_WDOG_TR_TIMEOUT_MASK 0x7FFFU
33 /* WDOG_DISABLE1 Register 32bit (-/W) */
34 #define U300_WDOG_D1R 0x08
35 #define U300_WDOG_D1R_DISABLE1_DISABLE_TIMER 0x2BADU
36 /* WDOG_DISABLE2 Register 32bit (R/W) */
37 #define U300_WDOG_D2R 0x0C
38 #define U300_WDOG_D2R_DISABLE2_DISABLE_TIMER 0xCAFEU
39 #define U300_WDOG_D2R_DISABLE_STATUS_DISABLED 0xDABEU
40 #define U300_WDOG_D2R_DISABLE_STATUS_ENABLED 0x0000U
41 /* WDOG_STATUS Register 32bit (R/W) */
42 #define U300_WDOG_SR 0x10
43 #define U300_WDOG_SR_STATUS_TIMED_OUT 0xCFE8U
44 #define U300_WDOG_SR_STATUS_NORMAL 0x0000U
45 #define U300_WDOG_SR_RESET_STATUS_RESET 0xE8B4U
46 /* WDOG_COUNT Register 32bit (R/-) */
47 #define U300_WDOG_CR 0x14
48 #define U300_WDOG_CR_VALID_IND 0x8000U
49 #define U300_WDOG_CR_VALID_STABLE 0x0000U
50 #define U300_WDOG_CR_COUNT_VALUE_MASK 0x7FFFU
51 /* WDOG_JTAGOVR Register 32bit (R/W) */
52 #define U300_WDOG_JOR 0x18
53 #define U300_WDOG_JOR_JTAG_MODE_IND 0x0002U
54 #define U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE 0x0001U
55 /* WDOG_RESTART Register 32bit (-/W) */
56 #define U300_WDOG_RR 0x1C
57 #define U300_WDOG_RR_RESTART_VALUE_RESUME 0xACEDU
58 /* WDOG_IRQ_EVENT Register 32bit (R/W) */
59 #define U300_WDOG_IER 0x20
60 #define U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND 0x0001U
61 #define U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE 0x0001U
62 /* WDOG_IRQ_MASK Register 32bit (R/W) */
63 #define U300_WDOG_IMR 0x24
64 #define U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE 0x0001U
65 /* WDOG_IRQ_FORCE Register 32bit (R/W) */
66 #define U300_WDOG_IFR 0x28
67 #define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE 0x0001U
69 /* Default timeout in seconds = 1 minute */
70 static unsigned int margin = 60;
71 static resource_size_t phybase;
72 static resource_size_t physize;
73 static int irq;
74 static void __iomem *virtbase;
75 static struct device *parent;
78 * The watchdog block is of course always clocked, the
79 * clk_enable()/clk_disable() calls are mainly for performing reference
80 * counting higher up in the clock hierarchy.
82 static struct clk *clk;
85 * Enabling and disabling functions.
87 static void coh901327_enable(u16 timeout)
89 u16 val;
90 unsigned long freq;
91 unsigned long delay_ns;
93 clk_enable(clk);
94 /* Restart timer if it is disabled */
95 val = readw(virtbase + U300_WDOG_D2R);
96 if (val == U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
97 writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
98 virtbase + U300_WDOG_RR);
99 /* Acknowledge any pending interrupt so it doesn't just fire off */
100 writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
101 virtbase + U300_WDOG_IER);
103 * The interrupt is cleared in the 32 kHz clock domain.
104 * Wait 3 32 kHz cycles for it to take effect
106 freq = clk_get_rate(clk);
107 delay_ns = DIV_ROUND_UP(1000000000, freq); /* Freq to ns and round up */
108 delay_ns = 3 * delay_ns; /* Wait 3 cycles */
109 ndelay(delay_ns);
110 /* Enable the watchdog interrupt */
111 writew(U300_WDOG_IMR_WILL_BARK_IRQ_ENABLE, virtbase + U300_WDOG_IMR);
112 /* Activate the watchdog timer */
113 writew(timeout, virtbase + U300_WDOG_TR);
114 /* Start the watchdog timer */
115 writew(U300_WDOG_FR_FEED_RESTART_TIMER, virtbase + U300_WDOG_FR);
117 * Extra read so that this change propagate in the watchdog.
119 (void) readw(virtbase + U300_WDOG_CR);
120 val = readw(virtbase + U300_WDOG_D2R);
121 clk_disable(clk);
122 if (val != U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
123 dev_err(parent,
124 "%s(): watchdog not enabled! D2R value %04x\n",
125 __func__, val);
128 static void coh901327_disable(void)
130 u16 val;
132 clk_enable(clk);
133 /* Disable the watchdog interrupt if it is active */
134 writew(0x0000U, virtbase + U300_WDOG_IMR);
135 /* If the watchdog is currently enabled, attempt to disable it */
136 val = readw(virtbase + U300_WDOG_D2R);
137 if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED) {
138 writew(U300_WDOG_D1R_DISABLE1_DISABLE_TIMER,
139 virtbase + U300_WDOG_D1R);
140 writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
141 virtbase + U300_WDOG_D2R);
142 /* Write this twice (else problems occur) */
143 writew(U300_WDOG_D2R_DISABLE2_DISABLE_TIMER,
144 virtbase + U300_WDOG_D2R);
146 val = readw(virtbase + U300_WDOG_D2R);
147 clk_disable(clk);
148 if (val != U300_WDOG_D2R_DISABLE_STATUS_DISABLED)
149 dev_err(parent,
150 "%s(): watchdog not disabled! D2R value %04x\n",
151 __func__, val);
154 static int coh901327_start(struct watchdog_device *wdt_dev)
156 coh901327_enable(wdt_dev->timeout * 100);
157 return 0;
160 static int coh901327_stop(struct watchdog_device *wdt_dev)
162 coh901327_disable();
163 return 0;
166 static int coh901327_ping(struct watchdog_device *wdd)
168 clk_enable(clk);
169 /* Feed the watchdog */
170 writew(U300_WDOG_FR_FEED_RESTART_TIMER,
171 virtbase + U300_WDOG_FR);
172 clk_disable(clk);
173 return 0;
176 static int coh901327_settimeout(struct watchdog_device *wdt_dev,
177 unsigned int time)
179 wdt_dev->timeout = time;
180 clk_enable(clk);
181 /* Set new timeout value */
182 writew(time * 100, virtbase + U300_WDOG_TR);
183 /* Feed the dog */
184 writew(U300_WDOG_FR_FEED_RESTART_TIMER,
185 virtbase + U300_WDOG_FR);
186 clk_disable(clk);
187 return 0;
190 static unsigned int coh901327_gettimeleft(struct watchdog_device *wdt_dev)
192 u16 val;
194 clk_enable(clk);
195 /* Read repeatedly until the value is stable! */
196 val = readw(virtbase + U300_WDOG_CR);
197 while (val & U300_WDOG_CR_VALID_IND)
198 val = readw(virtbase + U300_WDOG_CR);
199 val &= U300_WDOG_CR_COUNT_VALUE_MASK;
200 clk_disable(clk);
201 if (val != 0)
202 val /= 100;
204 return val;
208 * This interrupt occurs 10 ms before the watchdog WILL bark.
210 static irqreturn_t coh901327_interrupt(int irq, void *data)
212 u16 val;
215 * Ack IRQ? If this occurs we're FUBAR anyway, so
216 * just acknowledge, disable the interrupt and await the imminent end.
217 * If you at some point need a host of callbacks to be called
218 * when the system is about to watchdog-reset, add them here!
220 * NOTE: on future versions of this IP-block, it will be possible
221 * to prevent a watchdog reset by feeding the watchdog at this
222 * point.
224 clk_enable(clk);
225 val = readw(virtbase + U300_WDOG_IER);
226 if (val == U300_WDOG_IER_WILL_BARK_IRQ_EVENT_IND)
227 writew(U300_WDOG_IER_WILL_BARK_IRQ_ACK_ENABLE,
228 virtbase + U300_WDOG_IER);
229 writew(0x0000U, virtbase + U300_WDOG_IMR);
230 clk_disable(clk);
231 dev_crit(parent, "watchdog is barking!\n");
232 return IRQ_HANDLED;
235 static const struct watchdog_info coh901327_ident = {
236 .options = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
237 .identity = DRV_NAME,
240 static struct watchdog_ops coh901327_ops = {
241 .owner = THIS_MODULE,
242 .start = coh901327_start,
243 .stop = coh901327_stop,
244 .ping = coh901327_ping,
245 .set_timeout = coh901327_settimeout,
246 .get_timeleft = coh901327_gettimeleft,
249 static struct watchdog_device coh901327_wdt = {
250 .info = &coh901327_ident,
251 .ops = &coh901327_ops,
253 * Max timeout is 327 since the 10ms
254 * timeout register is max
255 * 0x7FFF = 327670ms ~= 327s.
257 .min_timeout = 0,
258 .max_timeout = 327,
261 static int __exit coh901327_remove(struct platform_device *pdev)
263 watchdog_unregister_device(&coh901327_wdt);
264 coh901327_disable();
265 free_irq(irq, pdev);
266 clk_unprepare(clk);
267 clk_put(clk);
268 iounmap(virtbase);
269 release_mem_region(phybase, physize);
270 return 0;
273 static int __init coh901327_probe(struct platform_device *pdev)
275 int ret;
276 u16 val;
277 struct resource *res;
279 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
280 if (!res)
281 return -ENOENT;
283 parent = &pdev->dev;
284 physize = resource_size(res);
285 phybase = res->start;
287 if (request_mem_region(phybase, physize, DRV_NAME) == NULL) {
288 ret = -EBUSY;
289 goto out;
292 virtbase = ioremap(phybase, physize);
293 if (!virtbase) {
294 ret = -ENOMEM;
295 goto out_no_remap;
298 clk = clk_get(&pdev->dev, NULL);
299 if (IS_ERR(clk)) {
300 ret = PTR_ERR(clk);
301 dev_err(&pdev->dev, "could not get clock\n");
302 goto out_no_clk;
304 ret = clk_prepare_enable(clk);
305 if (ret) {
306 dev_err(&pdev->dev, "could not prepare and enable clock\n");
307 goto out_no_clk_enable;
310 val = readw(virtbase + U300_WDOG_SR);
311 switch (val) {
312 case U300_WDOG_SR_STATUS_TIMED_OUT:
313 dev_info(&pdev->dev,
314 "watchdog timed out since last chip reset!\n");
315 coh901327_wdt.bootstatus |= WDIOF_CARDRESET;
316 /* Status will be cleared below */
317 break;
318 case U300_WDOG_SR_STATUS_NORMAL:
319 dev_info(&pdev->dev,
320 "in normal status, no timeouts have occurred.\n");
321 break;
322 default:
323 dev_info(&pdev->dev,
324 "contains an illegal status code (%08x)\n", val);
325 break;
328 val = readw(virtbase + U300_WDOG_D2R);
329 switch (val) {
330 case U300_WDOG_D2R_DISABLE_STATUS_DISABLED:
331 dev_info(&pdev->dev, "currently disabled.\n");
332 break;
333 case U300_WDOG_D2R_DISABLE_STATUS_ENABLED:
334 dev_info(&pdev->dev,
335 "currently enabled! (disabling it now)\n");
336 coh901327_disable();
337 break;
338 default:
339 dev_err(&pdev->dev,
340 "contains an illegal enable/disable code (%08x)\n",
341 val);
342 break;
345 /* Reset the watchdog */
346 writew(U300_WDOG_SR_RESET_STATUS_RESET, virtbase + U300_WDOG_SR);
348 irq = platform_get_irq(pdev, 0);
349 if (request_irq(irq, coh901327_interrupt, 0,
350 DRV_NAME " Bark", pdev)) {
351 ret = -EIO;
352 goto out_no_irq;
355 clk_disable(clk);
357 ret = watchdog_init_timeout(&coh901327_wdt, margin, &pdev->dev);
358 if (ret < 0)
359 coh901327_wdt.timeout = 60;
361 coh901327_wdt.parent = &pdev->dev;
362 ret = watchdog_register_device(&coh901327_wdt);
363 if (ret == 0)
364 dev_info(&pdev->dev,
365 "initialized. timer margin=%d sec\n", margin);
366 else
367 goto out_no_wdog;
369 return 0;
371 out_no_wdog:
372 free_irq(irq, pdev);
373 out_no_irq:
374 clk_disable_unprepare(clk);
375 out_no_clk_enable:
376 clk_put(clk);
377 out_no_clk:
378 iounmap(virtbase);
379 out_no_remap:
380 release_mem_region(phybase, SZ_4K);
381 out:
382 return ret;
385 #ifdef CONFIG_PM
387 static u16 wdogenablestore;
388 static u16 irqmaskstore;
390 static int coh901327_suspend(struct platform_device *pdev, pm_message_t state)
392 irqmaskstore = readw(virtbase + U300_WDOG_IMR) & 0x0001U;
393 wdogenablestore = readw(virtbase + U300_WDOG_D2R);
394 /* If watchdog is on, disable it here and now */
395 if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED)
396 coh901327_disable();
397 return 0;
400 static int coh901327_resume(struct platform_device *pdev)
402 /* Restore the watchdog interrupt */
403 writew(irqmaskstore, virtbase + U300_WDOG_IMR);
404 if (wdogenablestore == U300_WDOG_D2R_DISABLE_STATUS_ENABLED) {
405 /* Restart the watchdog timer */
406 writew(U300_WDOG_RR_RESTART_VALUE_RESUME,
407 virtbase + U300_WDOG_RR);
408 writew(U300_WDOG_FR_FEED_RESTART_TIMER,
409 virtbase + U300_WDOG_FR);
411 return 0;
413 #else
414 #define coh901327_suspend NULL
415 #define coh901327_resume NULL
416 #endif
419 * Mistreating the watchdog is the only way to perform a software reset of the
420 * system on EMP platforms. So we implement this and export a symbol for it.
422 void coh901327_watchdog_reset(void)
424 /* Enable even if on JTAG too */
425 writew(U300_WDOG_JOR_JTAG_WATCHDOG_ENABLE,
426 virtbase + U300_WDOG_JOR);
428 * Timeout = 5s, we have to wait for the watchdog reset to
429 * actually take place: the watchdog will be reloaded with the
430 * default value immediately, so we HAVE to reboot and get back
431 * into the kernel in 30s, or the device will reboot again!
432 * The boot loader will typically deactivate the watchdog, so we
433 * need time enough for the boot loader to get to the point of
434 * deactivating the watchdog before it is shut down by it.
436 * NOTE: on future versions of the watchdog, this restriction is
437 * gone: the watchdog will be reloaded with a default value (1 min)
438 * instead of last value, and you can conveniently set the watchdog
439 * timeout to 10ms (value = 1) without any problems.
441 coh901327_enable(500);
442 /* Return and await doom */
445 static const struct of_device_id coh901327_dt_match[] = {
446 { .compatible = "stericsson,coh901327" },
450 static struct platform_driver coh901327_driver = {
451 .driver = {
452 .name = "coh901327_wdog",
453 .of_match_table = coh901327_dt_match,
455 .remove = __exit_p(coh901327_remove),
456 .suspend = coh901327_suspend,
457 .resume = coh901327_resume,
460 module_platform_driver_probe(coh901327_driver, coh901327_probe);
462 MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
463 MODULE_DESCRIPTION("COH 901 327 Watchdog");
465 module_param(margin, uint, 0);
466 MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
468 MODULE_LICENSE("GPL");
469 MODULE_ALIAS("platform:coh901327-watchdog");