x86: Make the vdso2c compiler use the host architecture headers
[linux/fpc-iii.git] / arch / arm / boot / dts / rk3066a.dtsi
blobc0ba86c3a2abf1f1463d6644d12f28cb6870d7cb
1 /*
2  * Copyright (c) 2013 MundoReader S.L.
3  * Author: Heiko Stuebner <heiko@sntech.de>
4  *
5  * This file is dual-licensed: you can use it either under the terms
6  * of the GPL or the X11 license, at your option. Note that this dual
7  * licensing only applies to this file, and not this project as a
8  * whole.
9  *
10  *  a) This file is free software; you can redistribute it and/or
11  *     modify it under the terms of the GNU General Public License as
12  *     published by the Free Software Foundation; either version 2 of the
13  *     License, or (at your option) any later version.
14  *
15  *     This file is distributed in the hope that it will be useful,
16  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
17  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  *     GNU General Public License for more details.
19  *
20  * Or, alternatively,
21  *
22  *  b) Permission is hereby granted, free of charge, to any person
23  *     obtaining a copy of this software and associated documentation
24  *     files (the "Software"), to deal in the Software without
25  *     restriction, including without limitation the rights to use,
26  *     copy, modify, merge, publish, distribute, sublicense, and/or
27  *     sell copies of the Software, and to permit persons to whom the
28  *     Software is furnished to do so, subject to the following
29  *     conditions:
30  *
31  *     The above copyright notice and this permission notice shall be
32  *     included in all copies or substantial portions of the Software.
33  *
34  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41  *     OTHER DEALINGS IN THE SOFTWARE.
42  */
44 #include <dt-bindings/gpio/gpio.h>
45 #include <dt-bindings/pinctrl/rockchip.h>
46 #include <dt-bindings/clock/rk3066a-cru.h>
47 #include "rk3xxx.dtsi"
49 / {
50         compatible = "rockchip,rk3066a";
52         cpus {
53                 #address-cells = <1>;
54                 #size-cells = <0>;
55                 enable-method = "rockchip,rk3066-smp";
57                 cpu0: cpu@0 {
58                         device_type = "cpu";
59                         compatible = "arm,cortex-a9";
60                         next-level-cache = <&L2>;
61                         reg = <0x0>;
62                         operating-points = <
63                                 /* kHz    uV */
64                                 1416000 1300000
65                                 1200000 1175000
66                                 1008000 1125000
67                                 816000  1125000
68                                 600000  1100000
69                                 504000  1100000
70                                 312000  1075000
71                         >;
72                         clock-latency = <40000>;
73                         clocks = <&cru ARMCLK>;
74                 };
75                 cpu@1 {
76                         device_type = "cpu";
77                         compatible = "arm,cortex-a9";
78                         next-level-cache = <&L2>;
79                         reg = <0x1>;
80                 };
81         };
83         sram: sram@10080000 {
84                 compatible = "mmio-sram";
85                 reg = <0x10080000 0x10000>;
86                 #address-cells = <1>;
87                 #size-cells = <1>;
88                 ranges = <0 0x10080000 0x10000>;
90                 smp-sram@0 {
91                         compatible = "rockchip,rk3066-smp-sram";
92                         reg = <0x0 0x50>;
93                 };
94         };
96         i2s0: i2s@10118000 {
97                 compatible = "rockchip,rk3066-i2s";
98                 reg = <0x10118000 0x2000>;
99                 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
100                 #address-cells = <1>;
101                 #size-cells = <0>;
102                 pinctrl-names = "default";
103                 pinctrl-0 = <&i2s0_bus>;
104                 dmas = <&dmac1_s 4>, <&dmac1_s 5>;
105                 dma-names = "tx", "rx";
106                 clock-names = "i2s_hclk", "i2s_clk";
107                 clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
108                 rockchip,playback-channels = <8>;
109                 rockchip,capture-channels = <2>;
110                 status = "disabled";
111         };
113         i2s1: i2s@1011a000 {
114                 compatible = "rockchip,rk3066-i2s";
115                 reg = <0x1011a000 0x2000>;
116                 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
117                 #address-cells = <1>;
118                 #size-cells = <0>;
119                 pinctrl-names = "default";
120                 pinctrl-0 = <&i2s1_bus>;
121                 dmas = <&dmac1_s 6>, <&dmac1_s 7>;
122                 dma-names = "tx", "rx";
123                 clock-names = "i2s_hclk", "i2s_clk";
124                 clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
125                 rockchip,playback-channels = <2>;
126                 rockchip,capture-channels = <2>;
127                 status = "disabled";
128         };
130         i2s2: i2s@1011c000 {
131                 compatible = "rockchip,rk3066-i2s";
132                 reg = <0x1011c000 0x2000>;
133                 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
134                 #address-cells = <1>;
135                 #size-cells = <0>;
136                 pinctrl-names = "default";
137                 pinctrl-0 = <&i2s2_bus>;
138                 dmas = <&dmac1_s 9>, <&dmac1_s 10>;
139                 dma-names = "tx", "rx";
140                 clock-names = "i2s_hclk", "i2s_clk";
141                 clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
142                 rockchip,playback-channels = <2>;
143                 rockchip,capture-channels = <2>;
144                 status = "disabled";
145         };
147         cru: clock-controller@20000000 {
148                 compatible = "rockchip,rk3066a-cru";
149                 reg = <0x20000000 0x1000>;
150                 rockchip,grf = <&grf>;
152                 #clock-cells = <1>;
153                 #reset-cells = <1>;
154         };
156         timer@2000e000 {
157                 compatible = "snps,dw-apb-timer-osc";
158                 reg = <0x2000e000 0x100>;
159                 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
160                 clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>;
161                 clock-names = "timer", "pclk";
162         };
164         efuse: efuse@20010000 {
165                 compatible = "rockchip,rockchip-efuse";
166                 reg = <0x20010000 0x4000>;
167                 #address-cells = <1>;
168                 #size-cells = <1>;
169                 clocks = <&cru PCLK_EFUSE>;
170                 clock-names = "pclk_efuse";
172                 cpu_leakage: cpu_leakage@17 {
173                         reg = <0x17 0x1>;
174                 };
175         };
177         timer@20038000 {
178                 compatible = "snps,dw-apb-timer-osc";
179                 reg = <0x20038000 0x100>;
180                 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
181                 clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>;
182                 clock-names = "timer", "pclk";
183         };
185         timer@2003a000 {
186                 compatible = "snps,dw-apb-timer-osc";
187                 reg = <0x2003a000 0x100>;
188                 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
189                 clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>;
190                 clock-names = "timer", "pclk";
191         };
193         tsadc: tsadc@20060000 {
194                 compatible = "rockchip,rk3066-tsadc";
195                 reg = <0x20060000 0x100>;
196                 clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
197                 clock-names = "saradc", "apb_pclk";
198                 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
199                 #io-channel-cells = <1>;
200                 status = "disabled";
201         };
203         usbphy: phy {
204                 compatible = "rockchip,rk3066a-usb-phy", "rockchip,rk3288-usb-phy";
205                 rockchip,grf = <&grf>;
206                 #address-cells = <1>;
207                 #size-cells = <0>;
208                 status = "disabled";
210                 usbphy0: usb-phy@17c {
211                         #phy-cells = <0>;
212                         reg = <0x17c>;
213                         clocks = <&cru SCLK_OTGPHY0>;
214                         clock-names = "phyclk";
215                         #clock-cells = <0>;
216                 };
218                 usbphy1: usb-phy@188 {
219                         #phy-cells = <0>;
220                         reg = <0x188>;
221                         clocks = <&cru SCLK_OTGPHY1>;
222                         clock-names = "phyclk";
223                         #clock-cells = <0>;
224                 };
225         };
227         pinctrl: pinctrl {
228                 compatible = "rockchip,rk3066a-pinctrl";
229                 rockchip,grf = <&grf>;
230                 #address-cells = <1>;
231                 #size-cells = <1>;
232                 ranges;
234                 gpio0: gpio0@20034000 {
235                         compatible = "rockchip,gpio-bank";
236                         reg = <0x20034000 0x100>;
237                         interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
238                         clocks = <&cru PCLK_GPIO0>;
240                         gpio-controller;
241                         #gpio-cells = <2>;
243                         interrupt-controller;
244                         #interrupt-cells = <2>;
245                 };
247                 gpio1: gpio1@2003c000 {
248                         compatible = "rockchip,gpio-bank";
249                         reg = <0x2003c000 0x100>;
250                         interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
251                         clocks = <&cru PCLK_GPIO1>;
253                         gpio-controller;
254                         #gpio-cells = <2>;
256                         interrupt-controller;
257                         #interrupt-cells = <2>;
258                 };
260                 gpio2: gpio2@2003e000 {
261                         compatible = "rockchip,gpio-bank";
262                         reg = <0x2003e000 0x100>;
263                         interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
264                         clocks = <&cru PCLK_GPIO2>;
266                         gpio-controller;
267                         #gpio-cells = <2>;
269                         interrupt-controller;
270                         #interrupt-cells = <2>;
271                 };
273                 gpio3: gpio3@20080000 {
274                         compatible = "rockchip,gpio-bank";
275                         reg = <0x20080000 0x100>;
276                         interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
277                         clocks = <&cru PCLK_GPIO3>;
279                         gpio-controller;
280                         #gpio-cells = <2>;
282                         interrupt-controller;
283                         #interrupt-cells = <2>;
284                 };
286                 gpio4: gpio4@20084000 {
287                         compatible = "rockchip,gpio-bank";
288                         reg = <0x20084000 0x100>;
289                         interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
290                         clocks = <&cru PCLK_GPIO4>;
292                         gpio-controller;
293                         #gpio-cells = <2>;
295                         interrupt-controller;
296                         #interrupt-cells = <2>;
297                 };
299                 gpio6: gpio6@2000a000 {
300                         compatible = "rockchip,gpio-bank";
301                         reg = <0x2000a000 0x100>;
302                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
303                         clocks = <&cru PCLK_GPIO6>;
305                         gpio-controller;
306                         #gpio-cells = <2>;
308                         interrupt-controller;
309                         #interrupt-cells = <2>;
310                 };
312                 pcfg_pull_default: pcfg_pull_default {
313                         bias-pull-pin-default;
314                 };
316                 pcfg_pull_none: pcfg_pull_none {
317                         bias-disable;
318                 };
320                 emac {
321                         emac_xfer: emac-xfer {
322                                 rockchip,pins = <RK_GPIO1 16 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */
323                                                 <RK_GPIO1 17 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */
324                                                 <RK_GPIO1 18 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */
325                                                 <RK_GPIO1 19 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */
326                                                 <RK_GPIO1 20 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */
327                                                 <RK_GPIO1 21 RK_FUNC_2 &pcfg_pull_none>, /* crs_dvalid */
328                                                 <RK_GPIO1 22 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */
329                                                 <RK_GPIO1 23 RK_FUNC_2 &pcfg_pull_none>; /* rxd0 */
330                         };
332                         emac_mdio: emac-mdio {
333                                 rockchip,pins = <RK_GPIO1 24 RK_FUNC_2 &pcfg_pull_none>, /* mac_md */
334                                                 <RK_GPIO1 25 RK_FUNC_2 &pcfg_pull_none>; /* mac_mdclk */
335                         };
336                 };
338                 emmc {
339                         emmc_clk: emmc-clk {
340                                 rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>;
341                         };
343                         emmc_cmd: emmc-cmd {
344                                 rockchip,pins = <RK_GPIO4 9 RK_FUNC_2 &pcfg_pull_default>;
345                         };
347                         emmc_rst: emmc-rst {
348                                 rockchip,pins = <RK_GPIO4 10 RK_FUNC_2 &pcfg_pull_default>;
349                         };
351                         /*
352                          * The data pins are shared between nandc and emmc and
353                          * not accessible through pinctrl. Also they should've
354                          * been already set correctly by firmware, as
355                          * flash/emmc is the boot-device.
356                          */
357                 };
359                 i2c0 {
360                         i2c0_xfer: i2c0-xfer {
361                                 rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>,
362                                                 <RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>;
363                         };
364                 };
366                 i2c1 {
367                         i2c1_xfer: i2c1-xfer {
368                                 rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>,
369                                                 <RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>;
370                         };
371                 };
373                 i2c2 {
374                         i2c2_xfer: i2c2-xfer {
375                                 rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>,
376                                                 <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
377                         };
378                 };
380                 i2c3 {
381                         i2c3_xfer: i2c3-xfer {
382                                 rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>,
383                                                 <RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>;
384                         };
385                 };
387                 i2c4 {
388                         i2c4_xfer: i2c4-xfer {
389                                 rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
390                                                 <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>;
391                         };
392                 };
394                 pwm0 {
395                         pwm0_out: pwm0-out {
396                                 rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>;
397                         };
398                 };
400                 pwm1 {
401                         pwm1_out: pwm1-out {
402                                 rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>;
403                         };
404                 };
406                 pwm2 {
407                         pwm2_out: pwm2-out {
408                                 rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>;
409                         };
410                 };
412                 pwm3 {
413                         pwm3_out: pwm3-out {
414                                 rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>;
415                         };
416                 };
418                 spi0 {
419                         spi0_clk: spi0-clk {
420                                 rockchip,pins = <RK_GPIO1 5 RK_FUNC_2 &pcfg_pull_default>;
421                         };
422                         spi0_cs0: spi0-cs0 {
423                                 rockchip,pins = <RK_GPIO1 4 RK_FUNC_2 &pcfg_pull_default>;
424                         };
425                         spi0_tx: spi0-tx {
426                                 rockchip,pins = <RK_GPIO1 7 RK_FUNC_2 &pcfg_pull_default>;
427                         };
428                         spi0_rx: spi0-rx {
429                                 rockchip,pins = <RK_GPIO1 6 RK_FUNC_2 &pcfg_pull_default>;
430                         };
431                         spi0_cs1: spi0-cs1 {
432                                 rockchip,pins = <RK_GPIO4 15 RK_FUNC_1 &pcfg_pull_default>;
433                         };
434                 };
436                 spi1 {
437                         spi1_clk: spi1-clk {
438                                 rockchip,pins = <RK_GPIO2 19 RK_FUNC_2 &pcfg_pull_default>;
439                         };
440                         spi1_cs0: spi1-cs0 {
441                                 rockchip,pins = <RK_GPIO2 20 RK_FUNC_2 &pcfg_pull_default>;
442                         };
443                         spi1_rx: spi1-rx {
444                                 rockchip,pins = <RK_GPIO2 22 RK_FUNC_2 &pcfg_pull_default>;
445                         };
446                         spi1_tx: spi1-tx {
447                                 rockchip,pins = <RK_GPIO2 21 RK_FUNC_2 &pcfg_pull_default>;
448                         };
449                         spi1_cs1: spi1-cs1 {
450                                 rockchip,pins = <RK_GPIO2 23 RK_FUNC_2 &pcfg_pull_default>;
451                         };
452                 };
454                 uart0 {
455                         uart0_xfer: uart0-xfer {
456                                 rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
457                                                 <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
458                         };
460                         uart0_cts: uart0-cts {
461                                 rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
462                         };
464                         uart0_rts: uart0-rts {
465                                 rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
466                         };
467                 };
469                 uart1 {
470                         uart1_xfer: uart1-xfer {
471                                 rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
472                                                 <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
473                         };
475                         uart1_cts: uart1-cts {
476                                 rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
477                         };
479                         uart1_rts: uart1-rts {
480                                 rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
481                         };
482                 };
484                 uart2 {
485                         uart2_xfer: uart2-xfer {
486                                 rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
487                                                 <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
488                         };
489                         /* no rts / cts for uart2 */
490                 };
492                 uart3 {
493                         uart3_xfer: uart3-xfer {
494                                 rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
495                                                 <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
496                         };
498                         uart3_cts: uart3-cts {
499                                 rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
500                         };
502                         uart3_rts: uart3-rts {
503                                 rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
504                         };
505                 };
507                 sd0 {
508                         sd0_clk: sd0-clk {
509                                 rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
510                         };
512                         sd0_cmd: sd0-cmd {
513                                 rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
514                         };
516                         sd0_cd: sd0-cd {
517                                 rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
518                         };
520                         sd0_wp: sd0-wp {
521                                 rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
522                         };
524                         sd0_bus1: sd0-bus-width1 {
525                                 rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
526                         };
528                         sd0_bus4: sd0-bus-width4 {
529                                 rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
530                                                 <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
531                                                 <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
532                                                 <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
533                         };
534                 };
536                 sd1 {
537                         sd1_clk: sd1-clk {
538                                 rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
539                         };
541                         sd1_cmd: sd1-cmd {
542                                 rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
543                         };
545                         sd1_cd: sd1-cd {
546                                 rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
547                         };
549                         sd1_wp: sd1-wp {
550                                 rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
551                         };
553                         sd1_bus1: sd1-bus-width1 {
554                                 rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
555                         };
557                         sd1_bus4: sd1-bus-width4 {
558                                 rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
559                                                 <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
560                                                 <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
561                                                 <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
562                         };
563                 };
565                 i2s0 {
566                         i2s0_bus: i2s0-bus {
567                                 rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>,
568                                                 <RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>,
569                                                 <RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>,
570                                                 <RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>,
571                                                 <RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>,
572                                                 <RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>,
573                                                 <RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>,
574                                                 <RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>,
575                                                 <RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>;
576                         };
577                 };
579                 i2s1 {
580                         i2s1_bus: i2s1-bus {
581                                 rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>,
582                                                 <RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>,
583                                                 <RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>,
584                                                 <RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>,
585                                                 <RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>,
586                                                 <RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>;
587                         };
588                 };
590                 i2s2 {
591                         i2s2_bus: i2s2-bus {
592                                 rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>,
593                                                 <RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>,
594                                                 <RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>,
595                                                 <RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>,
596                                                 <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>,
597                                                 <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>;
598                         };
599                 };
600         };
603 &i2c0 {
604         pinctrl-names = "default";
605         pinctrl-0 = <&i2c0_xfer>;
608 &i2c1 {
609         pinctrl-names = "default";
610         pinctrl-0 = <&i2c1_xfer>;
613 &i2c2 {
614         pinctrl-names = "default";
615         pinctrl-0 = <&i2c2_xfer>;
618 &i2c3 {
619         pinctrl-names = "default";
620         pinctrl-0 = <&i2c3_xfer>;
623 &i2c4 {
624         pinctrl-names = "default";
625         pinctrl-0 = <&i2c4_xfer>;
628 &mmc0 {
629         pinctrl-names = "default";
630         pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>;
633 &mmc1 {
634         pinctrl-names = "default";
635         pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
638 &pwm0 {
639         pinctrl-names = "default";
640         pinctrl-0 = <&pwm0_out>;
643 &pwm1 {
644         pinctrl-names = "default";
645         pinctrl-0 = <&pwm1_out>;
648 &pwm2 {
649         pinctrl-names = "default";
650         pinctrl-0 = <&pwm2_out>;
653 &pwm3 {
654         pinctrl-names = "default";
655         pinctrl-0 = <&pwm3_out>;
658 &spi0 {
659         pinctrl-names = "default";
660         pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
663 &spi1 {
664         pinctrl-names = "default";
665         pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
668 &uart0 {
669         pinctrl-names = "default";
670         pinctrl-0 = <&uart0_xfer>;
673 &uart1 {
674         pinctrl-names = "default";
675         pinctrl-0 = <&uart1_xfer>;
678 &uart2 {
679         pinctrl-names = "default";
680         pinctrl-0 = <&uart2_xfer>;
683 &uart3 {
684         pinctrl-names = "default";
685         pinctrl-0 = <&uart3_xfer>;
688 &wdt {
689         compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
692 &emac {
693         compatible = "rockchip,rk3066-emac";