Documentation/devicetree/bindings/mfd/atmel-hlcdc.txt

   1 Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
   2
   3 Required properties:
   4  - compatible: value should be one of the following:
   5    "atmel,sama5d3-hlcdc"
   6  - reg: base address and size of the HLCDC device registers.
   7  - clock-names: the name of the 3 clocks requested by the HLCDC device.
   8    Should contain "periph_clk", "sys_clk" and "slow_clk".
   9  - clocks: should contain the 3 clocks requested by the HLCDC device.
  10  - interrupts: should contain the description of the HLCDC interrupt line
  11
  12 The HLCDC IP exposes two subdevices:
  13  - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
  14  - a Display Controller: see ../drm/atmel-hlcdc-dc.txt
  15
  16 Example:
  17
  18         hlcdc: hlcdc@f0030000 {
  19                 compatible = "atmel,sama5d3-hlcdc";
  20                 reg = <0xf0030000 0x2000>;
  21                 clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
  22                 clock-names = "periph_clk","sys_clk", "slow_clk";
  23                 interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
  24                 status = "disabled";
  25
  26                 hlcdc-display-controller {
  27                         compatible = "atmel,hlcdc-display-controller";
  28                         pinctrl-names = "default";
  29                         pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
  30                         #address-cells = <1>;
  31                         #size-cells = <0>;
  32
  33                         port@0 {
  34                                 #address-cells = <1>;
  35                                 #size-cells = <0>;
  36                                 reg = <0>;
  37
  38                                 hlcdc_panel_output: endpoint@0 {
  39                                         reg = <0>;
  40                                         remote-endpoint = <&panel_input>;
  41                                 };
  42                         };
  43                 };
  44
  45                 hlcdc_pwm: hlcdc-pwm {
  46                         compatible = "atmel,hlcdc-pwm";
  47                         pinctrl-names = "default";
  48                         pinctrl-0 = <&pinctrl_lcd_pwm>;
  49                         #pwm-cells = <3>;
  50                 };
  51         };