arch/arm/boot/dts/r8a7794-alt.dts

   1 /*
   2  * Device Tree Source for the Alt board
   3  *
   4  * Copyright (C) 2014 Renesas Electronics Corporation
   5  *
   6  * This file is licensed under the terms of the GNU General Public License
   7  * version 2.  This program is licensed "as is" without any warranty of any
   8  * kind, whether express or implied.
   9  */
  10
  11 /dts-v1/;
  12 #include "r8a7794.dtsi"
  13 #include <dt-bindings/gpio/gpio.h>
  14
  15 / {
  16         model = "Alt";
  17         compatible = "renesas,alt", "renesas,r8a7794";
  18
  19         aliases {
  20                 serial0 = &scif2;
  21                 i2c10 = &gpioi2c4;
  22                 i2c12 = &i2cexio4;
  23         };
  24
  25         chosen {
  26                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
  27                 stdout-path = "serial0:115200n8";
  28         };
  29
  30         memory@40000000 {
  31                 device_type = "memory";
  32                 reg = <0 0x40000000 0 0x40000000>;
  33         };
  34
  35         d3_3v: regulator-d3-3v {
  36                 compatible = "regulator-fixed";
  37                 regulator-name = "D3.3V";
  38                 regulator-min-microvolt = <3300000>;
  39                 regulator-max-microvolt = <3300000>;
  40                 regulator-boot-on;
  41                 regulator-always-on;
  42         };
  43
  44         vcc_sdhi0: regulator-vcc-sdhi0 {
  45                 compatible = "regulator-fixed";
  46
  47                 regulator-name = "SDHI0 Vcc";
  48                 regulator-min-microvolt = <3300000>;
  49                 regulator-max-microvolt = <3300000>;
  50
  51                 gpio = <&gpio2 26 GPIO_ACTIVE_HIGH>;
  52                 enable-active-high;
  53         };
  54
  55         vccq_sdhi0: regulator-vccq-sdhi0 {
  56                 compatible = "regulator-gpio";
  57
  58                 regulator-name = "SDHI0 VccQ";
  59                 regulator-min-microvolt = <1800000>;
  60                 regulator-max-microvolt = <3300000>;
  61
  62                 gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
  63                 gpios-states = <1>;
  64                 states = <3300000 1
  65                           1800000 0>;
  66         };
  67
  68         vcc_sdhi1: regulator-vcc-sdhi1 {
  69                 compatible = "regulator-fixed";
  70
  71                 regulator-name = "SDHI1 Vcc";
  72                 regulator-min-microvolt = <3300000>;
  73                 regulator-max-microvolt = <3300000>;
  74
  75                 gpio = <&gpio4 26 GPIO_ACTIVE_HIGH>;
  76                 enable-active-high;
  77         };
  78
  79         vccq_sdhi1: regulator-vccq-sdhi1 {
  80                 compatible = "regulator-gpio";
  81
  82                 regulator-name = "SDHI1 VccQ";
  83                 regulator-min-microvolt = <1800000>;
  84                 regulator-max-microvolt = <3300000>;
  85
  86                 gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
  87                 gpios-states = <1>;
  88                 states = <3300000 1
  89                           1800000 0>;
  90         };
  91
  92         lbsc {
  93                 #address-cells = <1>;
  94                 #size-cells = <1>;
  95         };
  96
  97         vga-encoder {
  98                 compatible = "adi,adv7123";
  99
 100                 ports {
 101                         #address-cells = <1>;
 102                         #size-cells = <0>;
 103
 104                         port@0 {
 105                                 reg = <0>;
 106                                 adv7123_in: endpoint {
 107                                         remote-endpoint = <&du_out_rgb1>;
 108                                 };
 109                         };
 110                         port@1 {
 111                                 reg = <1>;
 112                                 adv7123_out: endpoint {
 113                                         remote-endpoint = <&vga_in>;
 114                                 };
 115                         };
 116                 };
 117         };
 118
 119         vga {
 120                 compatible = "vga-connector";
 121
 122                 port {
 123                         vga_in: endpoint {
 124                                 remote-endpoint = <&adv7123_out>;
 125                         };
 126                 };
 127         };
 128
 129         x2_clk: x2-clock {
 130                 compatible = "fixed-clock";
 131                 #clock-cells = <0>;
 132                 clock-frequency = <74250000>;
 133         };
 134
 135         x13_clk: x13-clock {
 136                 compatible = "fixed-clock";
 137                 #clock-cells = <0>;
 138                 clock-frequency = <148500000>;
 139         };
 140
 141         gpioi2c4: i2c-10 {
 142                 #address-cells = <1>;
 143                 #size-cells = <0>;
 144                 compatible = "i2c-gpio";
 145                 status = "disabled";
 146                 gpios = <&gpio4 9 GPIO_ACTIVE_HIGH /* sda */
 147                          &gpio4 8 GPIO_ACTIVE_HIGH /* scl */
 148                         >;
 149                 i2c-gpio,delay-us = <5>;
 150         };
 151
 152         /*
 153          * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA).
 154          * A fallback to GPIO is provided.
 155          */
 156         i2cexio4: i2c-14 {
 157                 compatible = "i2c-demux-pinctrl";
 158                 i2c-parent = <&i2c4>, <&gpioi2c4>;
 159                 i2c-bus-name = "i2c-exio4";
 160                 #address-cells = <1>;
 161                 #size-cells = <0>;
 162         };
 163 };
 164
 165 &du {
 166         pinctrl-0 = <&du_pins>;
 167         pinctrl-names = "default";
 168         status = "okay";
 169
 170         clocks = <&mstp7_clks R8A7794_CLK_DU0>,
 171                  <&mstp7_clks R8A7794_CLK_DU0>,
 172                  <&x13_clk>, <&x2_clk>;
 173         clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 174
 175         ports {
 176                 port@1 {
 177                         endpoint {
 178                                 remote-endpoint = <&adv7123_in>;
 179                         };
 180                 };
 181         };
 182 };
 183
 184 &extal_clk {
 185         clock-frequency = <20000000>;
 186 };
 187
 188 &pfc {
 189         pinctrl-0 = <&scif_clk_pins>;
 190         pinctrl-names = "default";
 191
 192         du_pins: du {
 193                 groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
 194                 function = "du1";
 195         };
 196
 197         scif2_pins: scif2 {
 198                 groups = "scif2_data";
 199                 function = "scif2";
 200         };
 201
 202         scif_clk_pins: scif_clk {
 203                 groups = "scif_clk";
 204                 function = "scif_clk";
 205         };
 206
 207         ether_pins: ether {
 208                 groups = "eth_link", "eth_mdio", "eth_rmii";
 209                 function = "eth";
 210         };
 211
 212         phy1_pins: phy1 {
 213                 groups = "intc_irq8";
 214                 function = "intc";
 215         };
 216
 217         i2c1_pins: i2c1 {
 218                 groups = "i2c1";
 219                 function = "i2c1";
 220         };
 221
 222         i2c4_pins: i2c4 {
 223                 groups = "i2c4";
 224                 function = "i2c4";
 225         };
 226
 227         vin0_pins: vin0 {
 228                 groups = "vin0_data8", "vin0_clk";
 229                 function = "vin0";
 230         };
 231
 232         mmcif0_pins: mmcif0 {
 233                 groups = "mmc_data8", "mmc_ctrl";
 234                 function = "mmc";
 235         };
 236
 237         sdhi0_pins: sd0 {
 238                 groups = "sdhi0_data4", "sdhi0_ctrl";
 239                 function = "sdhi0";
 240                 power-source = <3300>;
 241         };
 242
 243         sdhi0_pins_uhs: sd0_uhs {
 244                 groups = "sdhi0_data4", "sdhi0_ctrl";
 245                 function = "sdhi0";
 246                 power-source = <1800>;
 247         };
 248
 249         sdhi1_pins: sd1 {
 250                 groups = "sdhi1_data4", "sdhi1_ctrl";
 251                 function = "sdhi1";
 252                 power-source = <3300>;
 253         };
 254
 255         sdhi1_pins_uhs: sd1_uhs {
 256                 groups = "sdhi1_data4", "sdhi1_ctrl";
 257                 function = "sdhi1";
 258                 power-source = <1800>;
 259         };
 260 };
 261
 262 &cmt0 {
 263         status = "okay";
 264 };
 265
 266 &pfc {
 267         qspi_pins: qspi {
 268                 groups = "qspi_ctrl", "qspi_data4";
 269                 function = "qspi";
 270         };
 271 };
 272
 273 &ether {
 274         pinctrl-0 = <&ether_pins &phy1_pins>;
 275         pinctrl-names = "default";
 276
 277         phy-handle = <&phy1>;
 278         renesas,ether-link-active-low;
 279         status = "okay";
 280
 281         phy1: ethernet-phy@1 {
 282                 reg = <1>;
 283                 interrupt-parent = <&irqc0>;
 284                 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 285                 micrel,led-mode = <1>;
 286         };
 287 };
 288
 289 &mmcif0 {
 290         pinctrl-0 = <&mmcif0_pins>;
 291         pinctrl-names = "default";
 292
 293         vmmc-supply = <&d3_3v>;
 294         vqmmc-supply = <&d3_3v>;
 295         bus-width = <8>;
 296         non-removable;
 297         status = "okay";
 298 };
 299
 300 &sdhi0 {
 301         pinctrl-0 = <&sdhi0_pins>;
 302         pinctrl-1 = <&sdhi0_pins_uhs>;
 303         pinctrl-names = "default", "state_uhs";
 304
 305         vmmc-supply = <&vcc_sdhi0>;
 306         vqmmc-supply = <&vccq_sdhi0>;
 307         cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
 308         wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
 309         sd-uhs-sdr50;
 310         sd-uhs-sdr104;
 311         status = "okay";
 312 };
 313
 314 &sdhi1 {
 315         pinctrl-0 = <&sdhi1_pins>;
 316         pinctrl-1 = <&sdhi1_pins_uhs>;
 317         pinctrl-names = "default", "state_uhs";
 318
 319         vmmc-supply = <&vcc_sdhi1>;
 320         vqmmc-supply = <&vccq_sdhi1>;
 321         cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 322         wp-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
 323         sd-uhs-sdr50;
 324         status = "okay";
 325 };
 326
 327 &i2c1 {
 328         pinctrl-0 = <&i2c1_pins>;
 329         pinctrl-names = "default";
 330
 331         status = "okay";
 332         clock-frequency = <400000>;
 333
 334         composite-in@20 {
 335                 compatible = "adi,adv7180";
 336                 reg = <0x20>;
 337                 remote = <&vin0>;
 338
 339                 port {
 340                         adv7180: endpoint {
 341                                 bus-width = <8>;
 342                                 remote-endpoint = <&vin0ep>;
 343                         };
 344                 };
 345         };
 346 };
 347
 348 &i2c4 {
 349         pinctrl-0 = <&i2c4_pins>;
 350         pinctrl-names = "i2c-exio4";
 351 };
 352
 353 &vin0 {
 354         status = "okay";
 355         pinctrl-0 = <&vin0_pins>;
 356         pinctrl-names = "default";
 357
 358         port {
 359                 #address-cells = <1>;
 360                 #size-cells = <0>;
 361
 362                 vin0ep: endpoint {
 363                         remote-endpoint = <&adv7180>;
 364                         bus-width = <8>;
 365                 };
 366         };
 367 };
 368
 369 &scif2 {
 370         pinctrl-0 = <&scif2_pins>;
 371         pinctrl-names = "default";
 372
 373         status = "okay";
 374 };
 375
 376 &scif_clk {
 377         clock-frequency = <14745600>;
 378         status = "okay";
 379 };
 380
 381 &qspi {
 382         pinctrl-0 = <&qspi_pins>;
 383         pinctrl-names = "default";
 384
 385         status = "okay";
 386
 387         flash@0 {
 388                 compatible = "spansion,s25fl512s", "jedec,spi-nor";
 389                 reg = <0>;
 390                 spi-max-frequency = <30000000>;
 391                 spi-tx-bus-width = <4>;
 392                 spi-rx-bus-width = <4>;
 393                 spi-cpol;
 394                 spi-cpha;
 395                 m25p,fast-read;
 396
 397                 partitions {
 398                         compatible = "fixed-partitions";
 399                         #address-cells = <1>;
 400                         #size-cells = <1>;
 401
 402                         partition@0 {
 403                                 label = "loader";
 404                                 reg = <0x00000000 0x00040000>;
 405                                 read-only;
 406                         };
 407                         partition@40000 {
 408                                 label = "system";
 409                                 reg = <0x00040000 0x00040000>;
 410                                 read-only;
 411                         };
 412                         partition@80000 {
 413                                 label = "user";
 414                                 reg = <0x00080000 0x03f80000>;
 415                         };
 416                 };
 417         };
 418 };