x86/mm/pat: Don't report PAT on CPUs that don't support it
[linux/fpc-iii.git] / arch / arm / boot / dts / tegra20-tec.dts
blobc12d8bead2eea89beccb58be81cdad22336d2b08
1 /dts-v1/;
3 #include "tegra20-tamonten.dtsi"
5 / {
6         model = "Avionic Design Tamonten Evaluation Carrier";
7         compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
9         host1x@50000000 {
10                 hdmi@54280000 {
11                         status = "okay";
12                 };
13         };
15         i2c@7000c000 {
16                 wm8903: wm8903@1a {
17                         compatible = "wlf,wm8903";
18                         reg = <0x1a>;
19                         interrupt-parent = <&gpio>;
20                         interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
22                         gpio-controller;
23                         #gpio-cells = <2>;
25                         micdet-cfg = <0>;
26                         micdet-delay = <100>;
27                         gpio-cfg = <0xffffffff
28                                     0xffffffff
29                                     0
30                                     0xffffffff
31                                     0xffffffff>;
32                 };
33         };
35         pcie-controller@80003000 {
36                 status = "okay";
38                 pci@1,0 {
39                         status = "okay";
40                 };
41         };
43         sound {
44                 compatible = "ad,tegra-audio-wm8903-tec",
45                              "nvidia,tegra-audio-wm8903";
46                 nvidia,model = "Avionic Design TEC";
48                 nvidia,audio-routing =
49                         "Headphone Jack", "HPOUTR",
50                         "Headphone Jack", "HPOUTL",
51                         "Int Spk", "ROP",
52                         "Int Spk", "RON",
53                         "Int Spk", "LOP",
54                         "Int Spk", "LON",
55                         "Mic Jack", "MICBIAS",
56                         "IN1L", "Mic Jack";
58                 nvidia,i2s-controller = <&tegra_i2s1>;
59                 nvidia,audio-codec = <&wm8903>;
61                 nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
62                 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
63                         GPIO_ACTIVE_HIGH>;
65                 clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
66                          <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
67                          <&tegra_car TEGRA20_CLK_CDEV1>;
68                 clock-names = "pll_a", "pll_a_out0", "mclk";
69         };
71         regulators {
72                 vcc_24v_reg: regulator@100 {
73                         compatible = "regulator-fixed";
74                         reg = <100>;
75                         regulator-name = "vcc_24v";
76                         regulator-min-microvolt = <24000000>;
77                         regulator-max-microvolt = <24000000>;
78                         regulator-always-on;
79                 };
81                 vdd_5v0_reg: regulator@101 {
82                         compatible = "regulator-fixed";
83                         reg = <101>;
84                         regulator-name = "vdd_5v0";
85                         vin-supply = <&vcc_24v_reg>;
86                         regulator-min-microvolt = <5000000>;
87                         regulator-max-microvolt = <5000000>;
88                         regulator-always-on;
89                 };
91                 vdd_3v3_reg: regulator@102 {
92                         compatible = "regulator-fixed";
93                         reg = <102>;
94                         regulator-name = "vdd_3v3";
95                         vin-supply = <&vcc_24v_reg>;
96                         regulator-min-microvolt = <3300000>;
97                         regulator-max-microvolt = <3300000>;
98                         regulator-always-on;
99                 };
101                 vdd_1v8_reg: regulator@103 {
102                         compatible = "regulator-fixed";
103                         reg = <103>;
104                         regulator-name = "vdd_1v8";
105                         vin-supply = <&vdd_3v3_reg>;
106                         regulator-min-microvolt = <1800000>;
107                         regulator-max-microvolt = <1800000>;
108                         regulator-always-on;
109                 };
110         };