?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
ocfs2: fix several issues of append dio
[linux/fpc-iii.git] / drivers / scsi / qla2xxx / qla_fw.h
blob42bb357bf56b1dcd7d4e0391c1a39cfa2a164197
1 /*
2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2014 QLogic Corporation
4 *
5 * See LICENSE.qla2xxx for copyright and licensing details.
6 */
7 #ifndef __QLA_FW_H
8 #define __QLA_FW_H
9
10 #define MBS_CHECKSUM_ERROR 0x4010
11 #define MBS_INVALID_PRODUCT_KEY 0x4020
12
13 /*
14 * Firmware Options.
15 */
16 #define FO1_ENABLE_PUREX BIT_10
17 #define FO1_DISABLE_LED_CTRL BIT_6
18 #define FO1_ENABLE_8016 BIT_0
19 #define FO2_ENABLE_SEL_CLASS2 BIT_5
20 #define FO3_NO_ABTS_ON_LINKDOWN BIT_14
21 #define FO3_HOLD_STS_IOCB BIT_12
22
23 /*
24 * Port Database structure definition for ISP 24xx.
25 */
26 #define PDO_FORCE_ADISC BIT_1
27 #define PDO_FORCE_PLOGI BIT_0
28
29
30 #define PORT_DATABASE_24XX_SIZE 64
31 struct port_database_24xx {
32 uint16_t flags;
33 #define PDF_TASK_RETRY_ID BIT_14
34 #define PDF_FC_TAPE BIT_7
35 #define PDF_ACK0_CAPABLE BIT_6
36 #define PDF_FCP2_CONF BIT_5
37 #define PDF_CLASS_2 BIT_4
38 #define PDF_HARD_ADDR BIT_1
39
40 uint8_t current_login_state;
41 uint8_t last_login_state;
42 #define PDS_PLOGI_PENDING 0x03
43 #define PDS_PLOGI_COMPLETE 0x04
44 #define PDS_PRLI_PENDING 0x05
45 #define PDS_PRLI_COMPLETE 0x06
46 #define PDS_PORT_UNAVAILABLE 0x07
47 #define PDS_PRLO_PENDING 0x09
48 #define PDS_LOGO_PENDING 0x11
49 #define PDS_PRLI2_PENDING 0x12
50
51 uint8_t hard_address[3];
52 uint8_t reserved_1;
53
54 uint8_t port_id[3];
55 uint8_t sequence_id;
56
57 uint16_t port_timer;
58
59 uint16_t nport_handle; /* N_PORT handle. */
60
61 uint16_t receive_data_size;
62 uint16_t reserved_2;
63
64 uint8_t prli_svc_param_word_0[2]; /* Big endian */
65 /* Bits 15-0 of word 0 */
66 uint8_t prli_svc_param_word_3[2]; /* Big endian */
67 /* Bits 15-0 of word 3 */
68
69 uint8_t port_name[WWN_SIZE];
70 uint8_t node_name[WWN_SIZE];
71
72 uint8_t reserved_3[24];
73 };
74
75 struct vp_database_24xx {
76 uint16_t vp_status;
77 uint8_t options;
78 uint8_t id;
79 uint8_t port_name[WWN_SIZE];
80 uint8_t node_name[WWN_SIZE];
81 uint16_t port_id_low;
82 uint16_t port_id_high;
83 };
84
85 struct nvram_24xx {
86 /* NVRAM header. */
87 uint8_t id[4];
88 uint16_t nvram_version;
89 uint16_t reserved_0;
90
91 /* Firmware Initialization Control Block. */
92 uint16_t version;
93 uint16_t reserved_1;
94 __le16 frame_payload_size;
95 uint16_t execution_throttle;
96 uint16_t exchange_count;
97 uint16_t hard_address;
98
99 uint8_t port_name[WWN_SIZE];
100 uint8_t node_name[WWN_SIZE];
101
102 uint16_t login_retry_count;
103 uint16_t link_down_on_nos;
104 uint16_t interrupt_delay_timer;
105 uint16_t login_timeout;
106
107 uint32_t firmware_options_1;
108 uint32_t firmware_options_2;
109 uint32_t firmware_options_3;
110
111 /* Offset 56. */
112
113 /*
114 * BIT 0 = Control Enable
115 * BIT 1-15 =
116 *
117 * BIT 0-7 = Reserved
118 * BIT 8-10 = Output Swing 1G
119 * BIT 11-13 = Output Emphasis 1G
120 * BIT 14-15 = Reserved
121 *
122 * BIT 0-7 = Reserved
123 * BIT 8-10 = Output Swing 2G
124 * BIT 11-13 = Output Emphasis 2G
125 * BIT 14-15 = Reserved
126 *
127 * BIT 0-7 = Reserved
128 * BIT 8-10 = Output Swing 4G
129 * BIT 11-13 = Output Emphasis 4G
130 * BIT 14-15 = Reserved
131 */
132 uint16_t seriallink_options[4];
133
134 uint16_t reserved_2[16];
135
136 /* Offset 96. */
137 uint16_t reserved_3[16];
138
139 /* PCIe table entries. */
140 uint16_t reserved_4[16];
141
142 /* Offset 160. */
143 uint16_t reserved_5[16];
144
145 /* Offset 192. */
146 uint16_t reserved_6[16];
147
148 /* Offset 224. */
149 uint16_t reserved_7[16];
150
151 /*
152 * BIT 0 = Enable spinup delay
153 * BIT 1 = Disable BIOS
154 * BIT 2 = Enable Memory Map BIOS
155 * BIT 3 = Enable Selectable Boot
156 * BIT 4 = Disable RISC code load
157 * BIT 5 = Disable Serdes
158 * BIT 6 =
159 * BIT 7 =
160 *
161 * BIT 8 =
162 * BIT 9 =
163 * BIT 10 = Enable lip full login
164 * BIT 11 = Enable target reset
165 * BIT 12 =
166 * BIT 13 =
167 * BIT 14 =
168 * BIT 15 = Enable alternate WWN
169 *
170 * BIT 16-31 =
171 */
172 uint32_t host_p;
173
174 uint8_t alternate_port_name[WWN_SIZE];
175 uint8_t alternate_node_name[WWN_SIZE];
176
177 uint8_t boot_port_name[WWN_SIZE];
178 uint16_t boot_lun_number;
179 uint16_t reserved_8;
180
181 uint8_t alt1_boot_port_name[WWN_SIZE];
182 uint16_t alt1_boot_lun_number;
183 uint16_t reserved_9;
184
185 uint8_t alt2_boot_port_name[WWN_SIZE];
186 uint16_t alt2_boot_lun_number;
187 uint16_t reserved_10;
188
189 uint8_t alt3_boot_port_name[WWN_SIZE];
190 uint16_t alt3_boot_lun_number;
191 uint16_t reserved_11;
192
193 /*
194 * BIT 0 = Selective Login
195 * BIT 1 = Alt-Boot Enable
196 * BIT 2 = Reserved
197 * BIT 3 = Boot Order List
198 * BIT 4 = Reserved
199 * BIT 5 = Selective LUN
200 * BIT 6 = Reserved
201 * BIT 7-31 =
202 */
203 uint32_t efi_parameters;
204
205 uint8_t reset_delay;
206 uint8_t reserved_12;
207 uint16_t reserved_13;
208
209 uint16_t boot_id_number;
210 uint16_t reserved_14;
211
212 uint16_t max_luns_per_target;
213 uint16_t reserved_15;
214
215 uint16_t port_down_retry_count;
216 uint16_t link_down_timeout;
217
218 /* FCode parameters. */
219 uint16_t fcode_parameter;
220
221 uint16_t reserved_16[3];
222
223 /* Offset 352. */
224 uint8_t prev_drv_ver_major;
225 uint8_t prev_drv_ver_submajob;
226 uint8_t prev_drv_ver_minor;
227 uint8_t prev_drv_ver_subminor;
228
229 uint16_t prev_bios_ver_major;
230 uint16_t prev_bios_ver_minor;
231
232 uint16_t prev_efi_ver_major;
233 uint16_t prev_efi_ver_minor;
234
235 uint16_t prev_fw_ver_major;
236 uint8_t prev_fw_ver_minor;
237 uint8_t prev_fw_ver_subminor;
238
239 uint16_t reserved_17[8];
240
241 /* Offset 384. */
242 uint16_t reserved_18[16];
243
244 /* Offset 416. */
245 uint16_t reserved_19[16];
246
247 /* Offset 448. */
248 uint16_t reserved_20[16];
249
250 /* Offset 480. */
251 uint8_t model_name[16];
252
253 uint16_t reserved_21[2];
254
255 /* Offset 500. */
256 /* HW Parameter Block. */
257 uint16_t pcie_table_sig;
258 uint16_t pcie_table_offset;
259
260 uint16_t subsystem_vendor_id;
261 uint16_t subsystem_device_id;
262
263 uint32_t checksum;
264 };
265
266 /*
267 * ISP Initialization Control Block.
268 * Little endian except where noted.
269 */
270 #define ICB_VERSION 1
271 struct init_cb_24xx {
272 uint16_t version;
273 uint16_t reserved_1;
274
275 uint16_t frame_payload_size;
276 uint16_t execution_throttle;
277 uint16_t exchange_count;
278
279 uint16_t hard_address;
280
281 uint8_t port_name[WWN_SIZE]; /* Big endian. */
282 uint8_t node_name[WWN_SIZE]; /* Big endian. */
283
284 uint16_t response_q_inpointer;
285 uint16_t request_q_outpointer;
286
287 uint16_t login_retry_count;
288
289 uint16_t prio_request_q_outpointer;
290
291 uint16_t response_q_length;
292 uint16_t request_q_length;
293
294 uint16_t link_down_on_nos; /* Milliseconds. */
295
296 uint16_t prio_request_q_length;
297
298 uint32_t request_q_address[2];
299 uint32_t response_q_address[2];
300 uint32_t prio_request_q_address[2];
301
302 uint16_t msix;
303 uint16_t msix_atio;
304 uint8_t reserved_2[4];
305
306 uint16_t atio_q_inpointer;
307 uint16_t atio_q_length;
308 uint32_t atio_q_address[2];
309
310 uint16_t interrupt_delay_timer; /* 100us increments. */
311 uint16_t login_timeout;
312
313 /*
314 * BIT 0 = Enable Hard Loop Id
315 * BIT 1 = Enable Fairness
316 * BIT 2 = Enable Full-Duplex
317 * BIT 3 = Reserved
318 * BIT 4 = Enable Target Mode
319 * BIT 5 = Disable Initiator Mode
320 * BIT 6 = Acquire FA-WWN
321 * BIT 7 = Enable D-port Diagnostics
322 *
323 * BIT 8 = Reserved
324 * BIT 9 = Non Participating LIP
325 * BIT 10 = Descending Loop ID Search
326 * BIT 11 = Acquire Loop ID in LIPA
327 * BIT 12 = Reserved
328 * BIT 13 = Full Login after LIP
329 * BIT 14 = Node Name Option
330 * BIT 15-31 = Reserved
331 */
332 uint32_t firmware_options_1;
333
334 /*
335 * BIT 0 = Operation Mode bit 0
336 * BIT 1 = Operation Mode bit 1
337 * BIT 2 = Operation Mode bit 2
338 * BIT 3 = Operation Mode bit 3
339 * BIT 4 = Connection Options bit 0
340 * BIT 5 = Connection Options bit 1
341 * BIT 6 = Connection Options bit 2
342 * BIT 7 = Enable Non part on LIHA failure
343 *
344 * BIT 8 = Enable Class 2
345 * BIT 9 = Enable ACK0
346 * BIT 10 = Reserved
347 * BIT 11 = Enable FC-SP Security
348 * BIT 12 = FC Tape Enable
349 * BIT 13 = Reserved
350 * BIT 14 = Enable Target PRLI Control
351 * BIT 15-31 = Reserved
352 */
353 uint32_t firmware_options_2;
354
355 /*
356 * BIT 0 = Reserved
357 * BIT 1 = Soft ID only
358 * BIT 2 = Reserved
359 * BIT 3 = Reserved
360 * BIT 4 = FCP RSP Payload bit 0
361 * BIT 5 = FCP RSP Payload bit 1
362 * BIT 6 = Enable Receive Out-of-Order data frame handling
363 * BIT 7 = Disable Automatic PLOGI on Local Loop
364 *
365 * BIT 8 = Reserved
366 * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling
367 * BIT 10 = Reserved
368 * BIT 11 = Reserved
369 * BIT 12 = Reserved
370 * BIT 13 = Data Rate bit 0
371 * BIT 14 = Data Rate bit 1
372 * BIT 15 = Data Rate bit 2
373 * BIT 16 = Enable 75 ohm Termination Select
374 * BIT 17-28 = Reserved
375 * BIT 29 = Enable response queue 0 in index shadowing
376 * BIT 30 = Enable request queue 0 out index shadowing
377 * BIT 31 = Reserved
378 */
379 uint32_t firmware_options_3;
380 uint16_t qos;
381 uint16_t rid;
382 uint8_t reserved_3[20];
383 };
384
385 /*
386 * ISP queue - command entry structure definition.
387 */
388 #define COMMAND_BIDIRECTIONAL 0x75
389 struct cmd_bidir {
390 uint8_t entry_type; /* Entry type. */
391 uint8_t entry_count; /* Entry count. */
392 uint8_t sys_define; /* System defined */
393 uint8_t entry_status; /* Entry status. */
394
395 uint32_t handle; /* System handle. */
396
397 uint16_t nport_handle; /* N_PORT hanlde. */
398
399 uint16_t timeout; /* Commnad timeout. */
400
401 uint16_t wr_dseg_count; /* Write Data segment count. */
402 uint16_t rd_dseg_count; /* Read Data segment count. */
403
404 struct scsi_lun lun; /* FCP LUN (BE). */
405
406 uint16_t control_flags; /* Control flags. */
407 #define BD_WRAP_BACK BIT_3
408 #define BD_READ_DATA BIT_1
409 #define BD_WRITE_DATA BIT_0
410
411 uint16_t fcp_cmnd_dseg_len; /* Data segment length. */
412 uint32_t fcp_cmnd_dseg_address[2]; /* Data segment address. */
413
414 uint16_t reserved[2]; /* Reserved */
415
416 uint32_t rd_byte_count; /* Total Byte count Read. */
417 uint32_t wr_byte_count; /* Total Byte count write. */
418
419 uint8_t port_id[3]; /* PortID of destination port.*/
420 uint8_t vp_index;
421
422 uint32_t fcp_data_dseg_address[2]; /* Data segment address. */
423 uint16_t fcp_data_dseg_len; /* Data segment length. */
424 };
425
426 #define COMMAND_TYPE_6 0x48 /* Command Type 6 entry */
427 struct cmd_type_6 {
428 uint8_t entry_type; /* Entry type. */
429 uint8_t entry_count; /* Entry count. */
430 uint8_t sys_define; /* System defined. */
431 uint8_t entry_status; /* Entry Status. */
432
433 uint32_t handle; /* System handle. */
434
435 uint16_t nport_handle; /* N_PORT handle. */
436 uint16_t timeout; /* Command timeout. */
437
438 uint16_t dseg_count; /* Data segment count. */
439
440 uint16_t fcp_rsp_dsd_len; /* FCP_RSP DSD length. */
441
442 struct scsi_lun lun; /* FCP LUN (BE). */
443
444 uint16_t control_flags; /* Control flags. */
445 #define CF_DIF_SEG_DESCR_ENABLE BIT_3
446 #define CF_DATA_SEG_DESCR_ENABLE BIT_2
447 #define CF_READ_DATA BIT_1
448 #define CF_WRITE_DATA BIT_0
449
450 uint16_t fcp_cmnd_dseg_len; /* Data segment length. */
451 uint32_t fcp_cmnd_dseg_address[2]; /* Data segment address. */
452
453 uint32_t fcp_rsp_dseg_address[2]; /* Data segment address. */
454
455 uint32_t byte_count; /* Total byte count. */
456
457 uint8_t port_id[3]; /* PortID of destination port. */
458 uint8_t vp_index;
459
460 uint32_t fcp_data_dseg_address[2]; /* Data segment address. */
461 uint32_t fcp_data_dseg_len; /* Data segment length. */
462 };
463
464 #define COMMAND_TYPE_7 0x18 /* Command Type 7 entry */
465 struct cmd_type_7 {
466 uint8_t entry_type; /* Entry type. */
467 uint8_t entry_count; /* Entry count. */
468 uint8_t sys_define; /* System defined. */
469 uint8_t entry_status; /* Entry Status. */
470
471 uint32_t handle; /* System handle. */
472
473 uint16_t nport_handle; /* N_PORT handle. */
474 uint16_t timeout; /* Command timeout. */
475 #define FW_MAX_TIMEOUT 0x1999
476
477 uint16_t dseg_count; /* Data segment count. */
478 uint16_t reserved_1;
479
480 struct scsi_lun lun; /* FCP LUN (BE). */
481
482 uint16_t task_mgmt_flags; /* Task management flags. */
483 #define TMF_CLEAR_ACA BIT_14
484 #define TMF_TARGET_RESET BIT_13
485 #define TMF_LUN_RESET BIT_12
486 #define TMF_CLEAR_TASK_SET BIT_10
487 #define TMF_ABORT_TASK_SET BIT_9
488 #define TMF_DSD_LIST_ENABLE BIT_2
489 #define TMF_READ_DATA BIT_1
490 #define TMF_WRITE_DATA BIT_0
491
492 uint8_t task;
493 #define TSK_SIMPLE 0
494 #define TSK_HEAD_OF_QUEUE 1
495 #define TSK_ORDERED 2
496 #define TSK_ACA 4
497 #define TSK_UNTAGGED 5
498
499 uint8_t crn;
500
501 uint8_t fcp_cdb[MAX_CMDSZ]; /* SCSI command words. */
502 uint32_t byte_count; /* Total byte count. */
503
504 uint8_t port_id[3]; /* PortID of destination port. */
505 uint8_t vp_index;
506
507 uint32_t dseg_0_address[2]; /* Data segment 0 address. */
508 uint32_t dseg_0_len; /* Data segment 0 length. */
509 };
510
511 #define COMMAND_TYPE_CRC_2 0x6A /* Command Type CRC_2 (Type 6)
512 * (T10-DIF) */
513 struct cmd_type_crc_2 {
514 uint8_t entry_type; /* Entry type. */
515 uint8_t entry_count; /* Entry count. */
516 uint8_t sys_define; /* System defined. */
517 uint8_t entry_status; /* Entry Status. */
518
519 uint32_t handle; /* System handle. */
520
521 uint16_t nport_handle; /* N_PORT handle. */
522 uint16_t timeout; /* Command timeout. */
523
524 uint16_t dseg_count; /* Data segment count. */
525
526 uint16_t fcp_rsp_dseg_len; /* FCP_RSP DSD length. */
527
528 struct scsi_lun lun; /* FCP LUN (BE). */
529
530 uint16_t control_flags; /* Control flags. */
531
532 uint16_t fcp_cmnd_dseg_len; /* Data segment length. */
533 uint32_t fcp_cmnd_dseg_address[2]; /* Data segment address. */
534
535 uint32_t fcp_rsp_dseg_address[2]; /* Data segment address. */
536
537 uint32_t byte_count; /* Total byte count. */
538
539 uint8_t port_id[3]; /* PortID of destination port. */
540 uint8_t vp_index;
541
542 uint32_t crc_context_address[2]; /* Data segment address. */
543 uint16_t crc_context_len; /* Data segment length. */
544 uint16_t reserved_1; /* MUST be set to 0. */
545 };
546
547
548 /*
549 * ISP queue - status entry structure definition.
550 */
551 #define STATUS_TYPE 0x03 /* Status entry. */
552 struct sts_entry_24xx {
553 uint8_t entry_type; /* Entry type. */
554 uint8_t entry_count; /* Entry count. */
555 uint8_t sys_define; /* System defined. */
556 uint8_t entry_status; /* Entry Status. */
557
558 uint32_t handle; /* System handle. */
559
560 uint16_t comp_status; /* Completion status. */
561 uint16_t ox_id; /* OX_ID used by the firmware. */
562
563 uint32_t residual_len; /* FW calc residual transfer length. */
564
565 uint16_t reserved_1;
566 uint16_t state_flags; /* State flags. */
567 #define SF_TRANSFERRED_DATA BIT_11
568 #define SF_FCP_RSP_DMA BIT_0
569
570 uint16_t retry_delay;
571 uint16_t scsi_status; /* SCSI status. */
572 #define SS_CONFIRMATION_REQ BIT_12
573
574 uint32_t rsp_residual_count; /* FCP RSP residual count. */
575
576 uint32_t sense_len; /* FCP SENSE length. */
577 uint32_t rsp_data_len; /* FCP response data length. */
578 uint8_t data[28]; /* FCP response/sense information. */
579 /*
580 * If DIF Error is set in comp_status, these additional fields are
581 * defined:
582 *
583 * !!! NOTE: Firmware sends expected/actual DIF data in big endian
584 * format; but all of the "data" field gets swab32-d in the beginning
585 * of qla2x00_status_entry().
586 *
587 * &data[10] : uint8_t report_runt_bg[2]; - computed guard
588 * &data[12] : uint8_t actual_dif[8]; - DIF Data received
589 * &data[20] : uint8_t expected_dif[8]; - DIF Data computed
590 */
591 };
592
593
594 /*
595 * Status entry completion status
596 */
597 #define CS_DATA_REASSEMBLY_ERROR 0x11 /* Data Reassembly Error.. */
598 #define CS_ABTS_BY_TARGET 0x13 /* Target send ABTS to abort IOCB. */
599 #define CS_FW_RESOURCE 0x2C /* Firmware Resource Unavailable. */
600 #define CS_TASK_MGMT_OVERRUN 0x30 /* Task management overrun (8+). */
601 #define CS_ABORT_BY_TARGET 0x47 /* Abort By Target. */
602
603 /*
604 * ISP queue - marker entry structure definition.
605 */
606 #define MARKER_TYPE 0x04 /* Marker entry. */
607 struct mrk_entry_24xx {
608 uint8_t entry_type; /* Entry type. */
609 uint8_t entry_count; /* Entry count. */
610 uint8_t handle_count; /* Handle count. */
611 uint8_t entry_status; /* Entry Status. */
612
613 uint32_t handle; /* System handle. */
614
615 uint16_t nport_handle; /* N_PORT handle. */
616
617 uint8_t modifier; /* Modifier (7-0). */
618 #define MK_SYNC_ID_LUN 0 /* Synchronize ID/LUN */
619 #define MK_SYNC_ID 1 /* Synchronize ID */
620 #define MK_SYNC_ALL 2 /* Synchronize all ID/LUN */
621 uint8_t reserved_1;
622
623 uint8_t reserved_2;
624 uint8_t vp_index;
625
626 uint16_t reserved_3;
627
628 uint8_t lun[8]; /* FCP LUN (BE). */
629 uint8_t reserved_4[40];
630 };
631
632 /*
633 * ISP queue - CT Pass-Through entry structure definition.
634 */
635 #define CT_IOCB_TYPE 0x29 /* CT Pass-Through IOCB entry */
636 struct ct_entry_24xx {
637 uint8_t entry_type; /* Entry type. */
638 uint8_t entry_count; /* Entry count. */
639 uint8_t sys_define; /* System Defined. */
640 uint8_t entry_status; /* Entry Status. */
641
642 uint32_t handle; /* System handle. */
643
644 uint16_t comp_status; /* Completion status. */
645
646 uint16_t nport_handle; /* N_PORT handle. */
647
648 uint16_t cmd_dsd_count;
649
650 uint8_t vp_index;
651 uint8_t reserved_1;
652
653 uint16_t timeout; /* Command timeout. */
654 uint16_t reserved_2;
655
656 uint16_t rsp_dsd_count;
657
658 uint8_t reserved_3[10];
659
660 uint32_t rsp_byte_count;
661 uint32_t cmd_byte_count;
662
663 uint32_t dseg_0_address[2]; /* Data segment 0 address. */
664 uint32_t dseg_0_len; /* Data segment 0 length. */
665 uint32_t dseg_1_address[2]; /* Data segment 1 address. */
666 uint32_t dseg_1_len; /* Data segment 1 length. */
667 };
668
669 /*
670 * ISP queue - ELS Pass-Through entry structure definition.
671 */
672 #define ELS_IOCB_TYPE 0x53 /* ELS Pass-Through IOCB entry */
673 struct els_entry_24xx {
674 uint8_t entry_type; /* Entry type. */
675 uint8_t entry_count; /* Entry count. */
676 uint8_t sys_define; /* System Defined. */
677 uint8_t entry_status; /* Entry Status. */
678
679 uint32_t handle; /* System handle. */
680
681 uint16_t reserved_1;
682
683 uint16_t nport_handle; /* N_PORT handle. */
684
685 uint16_t tx_dsd_count;
686
687 uint8_t vp_index;
688 uint8_t sof_type;
689 #define EST_SOFI3 (1 << 4)
690 #define EST_SOFI2 (3 << 4)
691
692 uint32_t rx_xchg_address; /* Receive exchange address. */
693 uint16_t rx_dsd_count;
694
695 uint8_t opcode;
696 uint8_t reserved_2;
697
698 uint8_t port_id[3];
699 uint8_t reserved_3;
700
701 uint16_t reserved_4;
702
703 uint16_t control_flags; /* Control flags. */
704 #define ECF_PAYLOAD_DESCR_MASK (BIT_15|BIT_14|BIT_13)
705 #define EPD_ELS_COMMAND (0 << 13)
706 #define EPD_ELS_ACC (1 << 13)
707 #define EPD_ELS_RJT (2 << 13)
708 #define EPD_RX_XCHG (3 << 13)
709 #define ECF_CLR_PASSTHRU_PEND BIT_12
710 #define ECF_INCL_FRAME_HDR BIT_11
711
712 uint32_t rx_byte_count;
713 uint32_t tx_byte_count;
714
715 uint32_t tx_address[2]; /* Data segment 0 address. */
716 uint32_t tx_len; /* Data segment 0 length. */
717 uint32_t rx_address[2]; /* Data segment 1 address. */
718 uint32_t rx_len; /* Data segment 1 length. */
719 };
720
721 struct els_sts_entry_24xx {
722 uint8_t entry_type; /* Entry type. */
723 uint8_t entry_count; /* Entry count. */
724 uint8_t sys_define; /* System Defined. */
725 uint8_t entry_status; /* Entry Status. */
726
727 uint32_t handle; /* System handle. */
728
729 uint16_t comp_status;
730
731 uint16_t nport_handle; /* N_PORT handle. */
732
733 uint16_t reserved_1;
734
735 uint8_t vp_index;
736 uint8_t sof_type;
737
738 uint32_t rx_xchg_address; /* Receive exchange address. */
739 uint16_t reserved_2;
740
741 uint8_t opcode;
742 uint8_t reserved_3;
743
744 uint8_t port_id[3];
745 uint8_t reserved_4;
746
747 uint16_t reserved_5;
748
749 uint16_t control_flags; /* Control flags. */
750 uint32_t total_byte_count;
751 uint32_t error_subcode_1;
752 uint32_t error_subcode_2;
753 };
754 /*
755 * ISP queue - Mailbox Command entry structure definition.
756 */
757 #define MBX_IOCB_TYPE 0x39
758 struct mbx_entry_24xx {
759 uint8_t entry_type; /* Entry type. */
760 uint8_t entry_count; /* Entry count. */
761 uint8_t handle_count; /* Handle count. */
762 uint8_t entry_status; /* Entry Status. */
763
764 uint32_t handle; /* System handle. */
765
766 uint16_t mbx[28];
767 };
768
769
770 #define LOGINOUT_PORT_IOCB_TYPE 0x52 /* Login/Logout Port entry. */
771 struct logio_entry_24xx {
772 uint8_t entry_type; /* Entry type. */
773 uint8_t entry_count; /* Entry count. */
774 uint8_t sys_define; /* System defined. */
775 uint8_t entry_status; /* Entry Status. */
776
777 uint32_t handle; /* System handle. */
778
779 uint16_t comp_status; /* Completion status. */
780 #define CS_LOGIO_ERROR 0x31 /* Login/Logout IOCB error. */
781
782 uint16_t nport_handle; /* N_PORT handle. */
783
784 uint16_t control_flags; /* Control flags. */
785 /* Modifiers. */
786 #define LCF_INCLUDE_SNS BIT_10 /* Include SNS (FFFFFC) during LOGO. */
787 #define LCF_FCP2_OVERRIDE BIT_9 /* Set/Reset word 3 of PRLI. */
788 #define LCF_CLASS_2 BIT_8 /* Enable class 2 during PLOGI. */
789 #define LCF_FREE_NPORT BIT_7 /* Release NPORT handle after LOGO. */
790 #define LCF_EXPL_LOGO BIT_6 /* Perform an explicit LOGO. */
791 #define LCF_SKIP_PRLI BIT_5 /* Skip PRLI after PLOGI. */
792 #define LCF_IMPL_LOGO_ALL BIT_5 /* Implicit LOGO to all ports. */
793 #define LCF_COND_PLOGI BIT_4 /* PLOGI only if not logged-in. */
794 #define LCF_IMPL_LOGO BIT_4 /* Perform an implicit LOGO. */
795 #define LCF_IMPL_PRLO BIT_4 /* Perform an implicit PRLO. */
796 /* Commands. */
797 #define LCF_COMMAND_PLOGI 0x00 /* PLOGI. */
798 #define LCF_COMMAND_PRLI 0x01 /* PRLI. */
799 #define LCF_COMMAND_PDISC 0x02 /* PDISC. */
800 #define LCF_COMMAND_ADISC 0x03 /* ADISC. */
801 #define LCF_COMMAND_LOGO 0x08 /* LOGO. */
802 #define LCF_COMMAND_PRLO 0x09 /* PRLO. */
803 #define LCF_COMMAND_TPRLO 0x0A /* TPRLO. */
804
805 uint8_t vp_index;
806 uint8_t reserved_1;
807
808 uint8_t port_id[3]; /* PortID of destination port. */
809
810 uint8_t rsp_size; /* Response size in 32bit words. */
811
812 uint32_t io_parameter[11]; /* General I/O parameters. */
813 #define LSC_SCODE_NOLINK 0x01
814 #define LSC_SCODE_NOIOCB 0x02
815 #define LSC_SCODE_NOXCB 0x03
816 #define LSC_SCODE_CMD_FAILED 0x04
817 #define LSC_SCODE_NOFABRIC 0x05
818 #define LSC_SCODE_FW_NOT_READY 0x07
819 #define LSC_SCODE_NOT_LOGGED_IN 0x09
820 #define LSC_SCODE_NOPCB 0x0A
821
822 #define LSC_SCODE_ELS_REJECT 0x18
823 #define LSC_SCODE_CMD_PARAM_ERR 0x19
824 #define LSC_SCODE_PORTID_USED 0x1A
825 #define LSC_SCODE_NPORT_USED 0x1B
826 #define LSC_SCODE_NONPORT 0x1C
827 #define LSC_SCODE_LOGGED_IN 0x1D
828 #define LSC_SCODE_NOFLOGI_ACC 0x1F
829 };
830
831 #define TSK_MGMT_IOCB_TYPE 0x14
832 struct tsk_mgmt_entry {
833 uint8_t entry_type; /* Entry type. */
834 uint8_t entry_count; /* Entry count. */
835 uint8_t handle_count; /* Handle count. */
836 uint8_t entry_status; /* Entry Status. */
837
838 uint32_t handle; /* System handle. */
839
840 uint16_t nport_handle; /* N_PORT handle. */
841
842 uint16_t reserved_1;
843
844 uint16_t delay; /* Activity delay in seconds. */
845
846 uint16_t timeout; /* Command timeout. */
847
848 struct scsi_lun lun; /* FCP LUN (BE). */
849
850 uint32_t control_flags; /* Control Flags. */
851 #define TCF_NOTMCMD_TO_TARGET BIT_31
852 #define TCF_LUN_RESET BIT_4
853 #define TCF_ABORT_TASK_SET BIT_3
854 #define TCF_CLEAR_TASK_SET BIT_2
855 #define TCF_TARGET_RESET BIT_1
856 #define TCF_CLEAR_ACA BIT_0
857
858 uint8_t reserved_2[20];
859
860 uint8_t port_id[3]; /* PortID of destination port. */
861 uint8_t vp_index;
862
863 uint8_t reserved_3[12];
864 };
865
866 #define ABORT_IOCB_TYPE 0x33
867 struct abort_entry_24xx {
868 uint8_t entry_type; /* Entry type. */
869 uint8_t entry_count; /* Entry count. */
870 uint8_t handle_count; /* Handle count. */
871 uint8_t entry_status; /* Entry Status. */
872
873 uint32_t handle; /* System handle. */
874
875 uint16_t nport_handle; /* N_PORT handle. */
876 /* or Completion status. */
877
878 uint16_t options; /* Options. */
879 #define AOF_NO_ABTS BIT_0 /* Do not send any ABTS. */
880
881 uint32_t handle_to_abort; /* System handle to abort. */
882
883 uint16_t req_que_no;
884 uint8_t reserved_1[30];
885
886 uint8_t port_id[3]; /* PortID of destination port. */
887 uint8_t vp_index;
888
889 uint8_t reserved_2[12];
890 };
891
892 /*
893 * ISP I/O Register Set structure definitions.
894 */
895 struct device_reg_24xx {
896 uint32_t flash_addr; /* Flash/NVRAM BIOS address. */
897 #define FARX_DATA_FLAG BIT_31
898 #define FARX_ACCESS_FLASH_CONF 0x7FFD0000
899 #define FARX_ACCESS_FLASH_DATA 0x7FF00000
900 #define FARX_ACCESS_NVRAM_CONF 0x7FFF0000
901 #define FARX_ACCESS_NVRAM_DATA 0x7FFE0000
902
903 #define FA_NVRAM_FUNC0_ADDR 0x80
904 #define FA_NVRAM_FUNC1_ADDR 0x180
905
906 #define FA_NVRAM_VPD_SIZE 0x200
907 #define FA_NVRAM_VPD0_ADDR 0x00
908 #define FA_NVRAM_VPD1_ADDR 0x100
909
910 #define FA_BOOT_CODE_ADDR 0x00000
911 /*
912 * RISC code begins at offset 512KB
913 * within flash. Consisting of two
914 * contiguous RISC code segments.
915 */
916 #define FA_RISC_CODE_ADDR 0x20000
917 #define FA_RISC_CODE_SEGMENTS 2
918
919 #define FA_FLASH_DESCR_ADDR_24 0x11000
920 #define FA_FLASH_LAYOUT_ADDR_24 0x11400
921 #define FA_NPIV_CONF0_ADDR_24 0x16000
922 #define FA_NPIV_CONF1_ADDR_24 0x17000
923
924 #define FA_FW_AREA_ADDR 0x40000
925 #define FA_VPD_NVRAM_ADDR 0x48000
926 #define FA_FEATURE_ADDR 0x4C000
927 #define FA_FLASH_DESCR_ADDR 0x50000
928 #define FA_FLASH_LAYOUT_ADDR 0x50400
929 #define FA_HW_EVENT0_ADDR 0x54000
930 #define FA_HW_EVENT1_ADDR 0x54400
931 #define FA_HW_EVENT_SIZE 0x200
932 #define FA_HW_EVENT_ENTRY_SIZE 4
933 #define FA_NPIV_CONF0_ADDR 0x5C000
934 #define FA_NPIV_CONF1_ADDR 0x5D000
935 #define FA_FCP_PRIO0_ADDR 0x10000
936 #define FA_FCP_PRIO1_ADDR 0x12000
937
938 /*
939 * Flash Error Log Event Codes.
940 */
941 #define HW_EVENT_RESET_ERR 0xF00B
942 #define HW_EVENT_ISP_ERR 0xF020
943 #define HW_EVENT_PARITY_ERR 0xF022
944 #define HW_EVENT_NVRAM_CHKSUM_ERR 0xF023
945 #define HW_EVENT_FLASH_FW_ERR 0xF024
946
947 uint32_t flash_data; /* Flash/NVRAM BIOS data. */
948
949 uint32_t ctrl_status; /* Control/Status. */
950 #define CSRX_FLASH_ACCESS_ERROR BIT_18 /* Flash/NVRAM Access Error. */
951 #define CSRX_DMA_ACTIVE BIT_17 /* DMA Active status. */
952 #define CSRX_DMA_SHUTDOWN BIT_16 /* DMA Shutdown control status. */
953 #define CSRX_FUNCTION BIT_15 /* Function number. */
954 /* PCI-X Bus Mode. */
955 #define CSRX_PCIX_BUS_MODE_MASK (BIT_11|BIT_10|BIT_9|BIT_8)
956 #define PBM_PCI_33MHZ (0 << 8)
957 #define PBM_PCIX_M1_66MHZ (1 << 8)
958 #define PBM_PCIX_M1_100MHZ (2 << 8)
959 #define PBM_PCIX_M1_133MHZ (3 << 8)
960 #define PBM_PCIX_M2_66MHZ (5 << 8)
961 #define PBM_PCIX_M2_100MHZ (6 << 8)
962 #define PBM_PCIX_M2_133MHZ (7 << 8)
963 #define PBM_PCI_66MHZ (8 << 8)
964 /* Max Write Burst byte count. */
965 #define CSRX_MAX_WRT_BURST_MASK (BIT_5|BIT_4)
966 #define MWB_512_BYTES (0 << 4)
967 #define MWB_1024_BYTES (1 << 4)
968 #define MWB_2048_BYTES (2 << 4)
969 #define MWB_4096_BYTES (3 << 4)
970
971 #define CSRX_64BIT_SLOT BIT_2 /* PCI 64-Bit Bus Slot. */
972 #define CSRX_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable. */
973 #define CSRX_ISP_SOFT_RESET BIT_0 /* ISP soft reset. */
974
975 uint32_t ictrl; /* Interrupt control. */
976 #define ICRX_EN_RISC_INT BIT_3 /* Enable RISC interrupts on PCI. */
977
978 uint32_t istatus; /* Interrupt status. */
979 #define ISRX_RISC_INT BIT_3 /* RISC interrupt. */
980
981 uint32_t unused_1[2]; /* Gap. */
982
983 /* Request Queue. */
984 uint32_t req_q_in; /* In-Pointer. */
985 uint32_t req_q_out; /* Out-Pointer. */
986 /* Response Queue. */
987 uint32_t rsp_q_in; /* In-Pointer. */
988 uint32_t rsp_q_out; /* Out-Pointer. */
989 /* Priority Request Queue. */
990 uint32_t preq_q_in; /* In-Pointer. */
991 uint32_t preq_q_out; /* Out-Pointer. */
992
993 uint32_t unused_2[2]; /* Gap. */
994
995 /* ATIO Queue. */
996 uint32_t atio_q_in; /* In-Pointer. */
997 uint32_t atio_q_out; /* Out-Pointer. */
998
999 uint32_t host_status;
1000 #define HSRX_RISC_INT BIT_15 /* RISC to Host interrupt. */
1001 #define HSRX_RISC_PAUSED BIT_8 /* RISC Paused. */
1002
1003 uint32_t hccr; /* Host command & control register. */
1004 /* HCCR statuses. */
1005 #define HCCRX_HOST_INT BIT_6 /* Host to RISC interrupt bit. */
1006 #define HCCRX_RISC_RESET BIT_5 /* RISC Reset mode bit. */
1007 /* HCCR commands. */
1008 /* NOOP. */
1009 #define HCCRX_NOOP 0x00000000
1010 /* Set RISC Reset. */
1011 #define HCCRX_SET_RISC_RESET 0x10000000
1012 /* Clear RISC Reset. */
1013 #define HCCRX_CLR_RISC_RESET 0x20000000
1014 /* Set RISC Pause. */
1015 #define HCCRX_SET_RISC_PAUSE 0x30000000
1016 /* Releases RISC Pause. */
1017 #define HCCRX_REL_RISC_PAUSE 0x40000000
1018 /* Set HOST to RISC interrupt. */
1019 #define HCCRX_SET_HOST_INT 0x50000000
1020 /* Clear HOST to RISC interrupt. */
1021 #define HCCRX_CLR_HOST_INT 0x60000000
1022 /* Clear RISC to PCI interrupt. */
1023 #define HCCRX_CLR_RISC_INT 0xA0000000
1024
1025 uint32_t gpiod; /* GPIO Data register. */
1026
1027 /* LED update mask. */
1028 #define GPDX_LED_UPDATE_MASK (BIT_20|BIT_19|BIT_18)
1029 /* Data update mask. */
1030 #define GPDX_DATA_UPDATE_MASK (BIT_17|BIT_16)
1031 /* Data update mask. */
1032 #define GPDX_DATA_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16)
1033 /* LED control mask. */
1034 #define GPDX_LED_COLOR_MASK (BIT_4|BIT_3|BIT_2)
1035 /* LED bit values. Color names as
1036 * referenced in fw spec.
1037 */
1038 #define GPDX_LED_YELLOW_ON BIT_2
1039 #define GPDX_LED_GREEN_ON BIT_3
1040 #define GPDX_LED_AMBER_ON BIT_4
1041 /* Data in/out. */
1042 #define GPDX_DATA_INOUT (BIT_1|BIT_0)
1043
1044 uint32_t gpioe; /* GPIO Enable register. */
1045 /* Enable update mask. */
1046 #define GPEX_ENABLE_UPDATE_MASK (BIT_17|BIT_16)
1047 /* Enable update mask. */
1048 #define GPEX_ENABLE_UPDATE_2_MASK (BIT_28|BIT_27|BIT_26|BIT_17|BIT_16)
1049 /* Enable. */
1050 #define GPEX_ENABLE (BIT_1|BIT_0)
1051
1052 uint32_t iobase_addr; /* I/O Bus Base Address register. */
1053
1054 uint32_t unused_3[10]; /* Gap. */
1055
1056 uint16_t mailbox0;
1057 uint16_t mailbox1;
1058 uint16_t mailbox2;
1059 uint16_t mailbox3;
1060 uint16_t mailbox4;
1061 uint16_t mailbox5;
1062 uint16_t mailbox6;
1063 uint16_t mailbox7;
1064 uint16_t mailbox8;
1065 uint16_t mailbox9;
1066 uint16_t mailbox10;
1067 uint16_t mailbox11;
1068 uint16_t mailbox12;
1069 uint16_t mailbox13;
1070 uint16_t mailbox14;
1071 uint16_t mailbox15;
1072 uint16_t mailbox16;
1073 uint16_t mailbox17;
1074 uint16_t mailbox18;
1075 uint16_t mailbox19;
1076 uint16_t mailbox20;
1077 uint16_t mailbox21;
1078 uint16_t mailbox22;
1079 uint16_t mailbox23;
1080 uint16_t mailbox24;
1081 uint16_t mailbox25;
1082 uint16_t mailbox26;
1083 uint16_t mailbox27;
1084 uint16_t mailbox28;
1085 uint16_t mailbox29;
1086 uint16_t mailbox30;
1087 uint16_t mailbox31;
1088
1089 uint32_t iobase_window;
1090 uint32_t iobase_c4;
1091 uint32_t iobase_c8;
1092 uint32_t unused_4_1[6]; /* Gap. */
1093 uint32_t iobase_q;
1094 uint32_t unused_5[2]; /* Gap. */
1095 uint32_t iobase_select;
1096 uint32_t unused_6[2]; /* Gap. */
1097 uint32_t iobase_sdata;
1098 };
1099 /* RISC-RISC semaphore register PCI offet */
1100 #define RISC_REGISTER_BASE_OFFSET 0x7010
1101 #define RISC_REGISTER_WINDOW_OFFET 0x6
1102
1103 /* RISC-RISC semaphore/flag register (risc address 0x7016) */
1104
1105 #define RISC_SEMAPHORE 0x1UL
1106 #define RISC_SEMAPHORE_WE (RISC_SEMAPHORE << 16)
1107 #define RISC_SEMAPHORE_CLR (RISC_SEMAPHORE_WE | 0x0UL)
1108 #define RISC_SEMAPHORE_SET (RISC_SEMAPHORE_WE | RISC_SEMAPHORE)
1109
1110 #define RISC_SEMAPHORE_FORCE 0x8000UL
1111 #define RISC_SEMAPHORE_FORCE_WE (RISC_SEMAPHORE_FORCE << 16)
1112 #define RISC_SEMAPHORE_FORCE_CLR (RISC_SEMAPHORE_FORCE_WE | 0x0UL)
1113 #define RISC_SEMAPHORE_FORCE_SET \
1114 (RISC_SEMAPHORE_FORCE_WE | RISC_SEMAPHORE_FORCE)
1115
1116 /* RISC semaphore timeouts (ms) */
1117 #define TIMEOUT_SEMAPHORE 2500
1118 #define TIMEOUT_SEMAPHORE_FORCE 2000
1119 #define TIMEOUT_TOTAL_ELAPSED 4500
1120
1121 /* Trace Control *************************************************************/
1122
1123 #define TC_AEN_DISABLE 0
1124
1125 #define TC_EFT_ENABLE 4
1126 #define TC_EFT_DISABLE 5
1127
1128 #define TC_FCE_ENABLE 8
1129 #define TC_FCE_OPTIONS 0
1130 #define TC_FCE_DEFAULT_RX_SIZE 2112
1131 #define TC_FCE_DEFAULT_TX_SIZE 2112
1132 #define TC_FCE_DISABLE 9
1133 #define TC_FCE_DISABLE_TRACE BIT_0
1134
1135 /* MID Support ***************************************************************/
1136
1137 #define MIN_MULTI_ID_FABRIC 64 /* Must be power-of-2. */
1138 #define MAX_MULTI_ID_FABRIC 256 /* ... */
1139
1140 struct mid_conf_entry_24xx {
1141 uint16_t reserved_1;
1142
1143 /*
1144 * BIT 0 = Enable Hard Loop Id
1145 * BIT 1 = Acquire Loop ID in LIPA
1146 * BIT 2 = ID not Acquired
1147 * BIT 3 = Enable VP
1148 * BIT 4 = Enable Initiator Mode
1149 * BIT 5 = Disable Target Mode
1150 * BIT 6-7 = Reserved
1151 */
1152 uint8_t options;
1153
1154 uint8_t hard_address;
1155
1156 uint8_t port_name[WWN_SIZE];
1157 uint8_t node_name[WWN_SIZE];
1158 };
1159
1160 struct mid_init_cb_24xx {
1161 struct init_cb_24xx init_cb;
1162
1163 uint16_t count;
1164 uint16_t options;
1165
1166 struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
1167 };
1168
1169
1170 struct mid_db_entry_24xx {
1171 uint16_t status;
1172 #define MDBS_NON_PARTIC BIT_3
1173 #define MDBS_ID_ACQUIRED BIT_1
1174 #define MDBS_ENABLED BIT_0
1175
1176 uint8_t options;
1177 uint8_t hard_address;
1178
1179 uint8_t port_name[WWN_SIZE];
1180 uint8_t node_name[WWN_SIZE];
1181
1182 uint8_t port_id[3];
1183 uint8_t reserved_1;
1184 };
1185
1186 /*
1187 * Virtual Port Control IOCB
1188 */
1189 #define VP_CTRL_IOCB_TYPE 0x30 /* Virtual Port Control entry. */
1190 struct vp_ctrl_entry_24xx {
1191 uint8_t entry_type; /* Entry type. */
1192 uint8_t entry_count; /* Entry count. */
1193 uint8_t sys_define; /* System defined. */
1194 uint8_t entry_status; /* Entry Status. */
1195
1196 uint32_t handle; /* System handle. */
1197
1198 uint16_t vp_idx_failed;
1199
1200 uint16_t comp_status; /* Completion status. */
1201 #define CS_VCE_IOCB_ERROR 0x01 /* Error processing IOCB */
1202 #define CS_VCE_ACQ_ID_ERROR 0x02 /* Error while acquireing ID. */
1203 #define CS_VCE_BUSY 0x05 /* Firmware not ready to accept cmd. */
1204
1205 uint16_t command;
1206 #define VCE_COMMAND_ENABLE_VPS 0x00 /* Enable VPs. */
1207 #define VCE_COMMAND_DISABLE_VPS 0x08 /* Disable VPs. */
1208 #define VCE_COMMAND_DISABLE_VPS_REINIT 0x09 /* Disable VPs and reinit link. */
1209 #define VCE_COMMAND_DISABLE_VPS_LOGO 0x0a /* Disable VPs and LOGO ports. */
1210 #define VCE_COMMAND_DISABLE_VPS_LOGO_ALL 0x0b /* Disable VPs and LOGO ports. */
1211
1212 uint16_t vp_count;
1213
1214 uint8_t vp_idx_map[16];
1215 uint16_t flags;
1216 uint16_t id;
1217 uint16_t reserved_4;
1218 uint16_t hopct;
1219 uint8_t reserved_5[24];
1220 };
1221
1222 /*
1223 * Modify Virtual Port Configuration IOCB
1224 */
1225 #define VP_CONFIG_IOCB_TYPE 0x31 /* Virtual Port Config entry. */
1226 struct vp_config_entry_24xx {
1227 uint8_t entry_type; /* Entry type. */
1228 uint8_t entry_count; /* Entry count. */
1229 uint8_t handle_count;
1230 uint8_t entry_status; /* Entry Status. */
1231
1232 uint32_t handle; /* System handle. */
1233
1234 uint16_t flags;
1235 #define CS_VF_BIND_VPORTS_TO_VF BIT_0
1236 #define CS_VF_SET_QOS_OF_VPORTS BIT_1
1237 #define CS_VF_SET_HOPS_OF_VPORTS BIT_2
1238
1239 uint16_t comp_status; /* Completion status. */
1240 #define CS_VCT_STS_ERROR 0x01 /* Specified VPs were not disabled. */
1241 #define CS_VCT_CNT_ERROR 0x02 /* Invalid VP count. */
1242 #define CS_VCT_ERROR 0x03 /* Unknown error. */
1243 #define CS_VCT_IDX_ERROR 0x02 /* Invalid VP index. */
1244 #define CS_VCT_BUSY 0x05 /* Firmware not ready to accept cmd. */
1245
1246 uint8_t command;
1247 #define VCT_COMMAND_MOD_VPS 0x00 /* Modify VP configurations. */
1248 #define VCT_COMMAND_MOD_ENABLE_VPS 0x01 /* Modify configuration & enable VPs. */
1249
1250 uint8_t vp_count;
1251
1252 uint8_t vp_index1;
1253 uint8_t vp_index2;
1254
1255 uint8_t options_idx1;
1256 uint8_t hard_address_idx1;
1257 uint16_t reserved_vp1;
1258 uint8_t port_name_idx1[WWN_SIZE];
1259 uint8_t node_name_idx1[WWN_SIZE];
1260
1261 uint8_t options_idx2;
1262 uint8_t hard_address_idx2;
1263 uint16_t reserved_vp2;
1264 uint8_t port_name_idx2[WWN_SIZE];
1265 uint8_t node_name_idx2[WWN_SIZE];
1266 uint16_t id;
1267 uint16_t reserved_4;
1268 uint16_t hopct;
1269 uint8_t reserved_5[2];
1270 };
1271
1272 #define VP_RPT_ID_IOCB_TYPE 0x32 /* Report ID Acquisition entry. */
1273 struct vp_rpt_id_entry_24xx {
1274 uint8_t entry_type; /* Entry type. */
1275 uint8_t entry_count; /* Entry count. */
1276 uint8_t sys_define; /* System defined. */
1277 uint8_t entry_status; /* Entry Status. */
1278
1279 uint32_t handle; /* System handle. */
1280
1281 uint16_t vp_count; /* Format 0 -- | VP setup | VP acq |. */
1282 /* Format 1 -- | VP count |. */
1283 uint16_t vp_idx; /* Format 0 -- Reserved. */
1284 /* Format 1 -- VP status and index. */
1285
1286 uint8_t port_id[3];
1287 uint8_t format;
1288
1289 uint8_t vp_idx_map[16];
1290
1291 uint8_t reserved_4[32];
1292 };
1293
1294 #define VF_EVFP_IOCB_TYPE 0x26 /* Exchange Virtual Fabric Parameters entry. */
1295 struct vf_evfp_entry_24xx {
1296 uint8_t entry_type; /* Entry type. */
1297 uint8_t entry_count; /* Entry count. */
1298 uint8_t sys_define; /* System defined. */
1299 uint8_t entry_status; /* Entry Status. */
1300
1301 uint32_t handle; /* System handle. */
1302 uint16_t comp_status; /* Completion status. */
1303 uint16_t timeout; /* timeout */
1304 uint16_t adim_tagging_mode;
1305
1306 uint16_t vfport_id;
1307 uint32_t exch_addr;
1308
1309 uint16_t nport_handle; /* N_PORT handle. */
1310 uint16_t control_flags;
1311 uint32_t io_parameter_0;
1312 uint32_t io_parameter_1;
1313 uint32_t tx_address[2]; /* Data segment 0 address. */
1314 uint32_t tx_len; /* Data segment 0 length. */
1315 uint32_t rx_address[2]; /* Data segment 1 address. */
1316 uint32_t rx_len; /* Data segment 1 length. */
1317 };
1318
1319 /* END MID Support ***********************************************************/
1320
1321 /* Flash Description Table ***************************************************/
1322
1323 struct qla_fdt_layout {
1324 uint8_t sig[4];
1325 uint16_t version;
1326 uint16_t len;
1327 uint16_t checksum;
1328 uint8_t unused1[2];
1329 uint8_t model[16];
1330 uint16_t man_id;
1331 uint16_t id;
1332 uint8_t flags;
1333 uint8_t erase_cmd;
1334 uint8_t alt_erase_cmd;
1335 uint8_t wrt_enable_cmd;
1336 uint8_t wrt_enable_bits;
1337 uint8_t wrt_sts_reg_cmd;
1338 uint8_t unprotect_sec_cmd;
1339 uint8_t read_man_id_cmd;
1340 uint32_t block_size;
1341 uint32_t alt_block_size;
1342 uint32_t flash_size;
1343 uint32_t wrt_enable_data;
1344 uint8_t read_id_addr_len;
1345 uint8_t wrt_disable_bits;
1346 uint8_t read_dev_id_len;
1347 uint8_t chip_erase_cmd;
1348 uint16_t read_timeout;
1349 uint8_t protect_sec_cmd;
1350 uint8_t unused2[65];
1351 };
1352
1353 /* Flash Layout Table ********************************************************/
1354
1355 struct qla_flt_location {
1356 uint8_t sig[4];
1357 uint16_t start_lo;
1358 uint16_t start_hi;
1359 uint8_t version;
1360 uint8_t unused[5];
1361 uint16_t checksum;
1362 };
1363
1364 struct qla_flt_header {
1365 uint16_t version;
1366 uint16_t length;
1367 uint16_t checksum;
1368 uint16_t unused;
1369 };
1370
1371 #define FLT_REG_FW 0x01
1372 #define FLT_REG_BOOT_CODE 0x07
1373 #define FLT_REG_VPD_0 0x14
1374 #define FLT_REG_NVRAM_0 0x15
1375 #define FLT_REG_VPD_1 0x16
1376 #define FLT_REG_NVRAM_1 0x17
1377 #define FLT_REG_VPD_2 0xD4
1378 #define FLT_REG_NVRAM_2 0xD5
1379 #define FLT_REG_VPD_3 0xD6
1380 #define FLT_REG_NVRAM_3 0xD7
1381 #define FLT_REG_FDT 0x1a
1382 #define FLT_REG_FLT 0x1c
1383 #define FLT_REG_HW_EVENT_0 0x1d
1384 #define FLT_REG_HW_EVENT_1 0x1f
1385 #define FLT_REG_NPIV_CONF_0 0x29
1386 #define FLT_REG_NPIV_CONF_1 0x2a
1387 #define FLT_REG_GOLD_FW 0x2f
1388 #define FLT_REG_FCP_PRIO_0 0x87
1389 #define FLT_REG_FCP_PRIO_1 0x88
1390 #define FLT_REG_CNA_FW 0x97
1391 #define FLT_REG_BOOT_CODE_8044 0xA2
1392 #define FLT_REG_FCOE_FW 0xA4
1393 #define FLT_REG_FCOE_NVRAM_0 0xAA
1394 #define FLT_REG_FCOE_NVRAM_1 0xAC
1395
1396 struct qla_flt_region {
1397 uint32_t code;
1398 uint32_t size;
1399 uint32_t start;
1400 uint32_t end;
1401 };
1402
1403 /* Flash NPIV Configuration Table ********************************************/
1404
1405 struct qla_npiv_header {
1406 uint8_t sig[2];
1407 uint16_t version;
1408 uint16_t entries;
1409 uint16_t unused[4];
1410 uint16_t checksum;
1411 };
1412
1413 struct qla_npiv_entry {
1414 uint16_t flags;
1415 uint16_t vf_id;
1416 uint8_t q_qos;
1417 uint8_t f_qos;
1418 uint16_t unused1;
1419 uint8_t port_name[WWN_SIZE];
1420 uint8_t node_name[WWN_SIZE];
1421 };
1422
1423 /* 84XX Support **************************************************************/
1424
1425 #define MBA_ISP84XX_ALERT 0x800f /* Alert Notification. */
1426 #define A84_PANIC_RECOVERY 0x1
1427 #define A84_OP_LOGIN_COMPLETE 0x2
1428 #define A84_DIAG_LOGIN_COMPLETE 0x3
1429 #define A84_GOLD_LOGIN_COMPLETE 0x4
1430
1431 #define MBC_ISP84XX_RESET 0x3a /* Reset. */
1432
1433 #define FSTATE_REMOTE_FC_DOWN BIT_0
1434 #define FSTATE_NSL_LINK_DOWN BIT_1
1435 #define FSTATE_IS_DIAG_FW BIT_2
1436 #define FSTATE_LOGGED_IN BIT_3
1437 #define FSTATE_WAITING_FOR_VERIFY BIT_4
1438
1439 #define VERIFY_CHIP_IOCB_TYPE 0x1B
1440 struct verify_chip_entry_84xx {
1441 uint8_t entry_type;
1442 uint8_t entry_count;
1443 uint8_t sys_defined;
1444 uint8_t entry_status;
1445
1446 uint32_t handle;
1447
1448 uint16_t options;
1449 #define VCO_DONT_UPDATE_FW BIT_0
1450 #define VCO_FORCE_UPDATE BIT_1
1451 #define VCO_DONT_RESET_UPDATE BIT_2
1452 #define VCO_DIAG_FW BIT_3
1453 #define VCO_END_OF_DATA BIT_14
1454 #define VCO_ENABLE_DSD BIT_15
1455
1456 uint16_t reserved_1;
1457
1458 uint16_t data_seg_cnt;
1459 uint16_t reserved_2[3];
1460
1461 uint32_t fw_ver;
1462 uint32_t exchange_address;
1463
1464 uint32_t reserved_3[3];
1465 uint32_t fw_size;
1466 uint32_t fw_seq_size;
1467 uint32_t relative_offset;
1468
1469 uint32_t dseg_address[2];
1470 uint32_t dseg_length;
1471 };
1472
1473 struct verify_chip_rsp_84xx {
1474 uint8_t entry_type;
1475 uint8_t entry_count;
1476 uint8_t sys_defined;
1477 uint8_t entry_status;
1478
1479 uint32_t handle;
1480
1481 uint16_t comp_status;
1482 #define CS_VCS_CHIP_FAILURE 0x3
1483 #define CS_VCS_BAD_EXCHANGE 0x8
1484 #define CS_VCS_SEQ_COMPLETEi 0x40
1485
1486 uint16_t failure_code;
1487 #define VFC_CHECKSUM_ERROR 0x1
1488 #define VFC_INVALID_LEN 0x2
1489 #define VFC_ALREADY_IN_PROGRESS 0x8
1490
1491 uint16_t reserved_1[4];
1492
1493 uint32_t fw_ver;
1494 uint32_t exchange_address;
1495
1496 uint32_t reserved_2[6];
1497 };
1498
1499 #define ACCESS_CHIP_IOCB_TYPE 0x2B
1500 struct access_chip_84xx {
1501 uint8_t entry_type;
1502 uint8_t entry_count;
1503 uint8_t sys_defined;
1504 uint8_t entry_status;
1505
1506 uint32_t handle;
1507
1508 uint16_t options;
1509 #define ACO_DUMP_MEMORY 0x0
1510 #define ACO_LOAD_MEMORY 0x1
1511 #define ACO_CHANGE_CONFIG_PARAM 0x2
1512 #define ACO_REQUEST_INFO 0x3
1513
1514 uint16_t reserved1;
1515
1516 uint16_t dseg_count;
1517 uint16_t reserved2[3];
1518
1519 uint32_t parameter1;
1520 uint32_t parameter2;
1521 uint32_t parameter3;
1522
1523 uint32_t reserved3[3];
1524 uint32_t total_byte_cnt;
1525 uint32_t reserved4;
1526
1527 uint32_t dseg_address[2];
1528 uint32_t dseg_length;
1529 };
1530
1531 struct access_chip_rsp_84xx {
1532 uint8_t entry_type;
1533 uint8_t entry_count;
1534 uint8_t sys_defined;
1535 uint8_t entry_status;
1536
1537 uint32_t handle;
1538
1539 uint16_t comp_status;
1540 uint16_t failure_code;
1541 uint32_t residual_count;
1542
1543 uint32_t reserved[12];
1544 };
1545
1546 /* 81XX Support **************************************************************/
1547
1548 #define MBA_DCBX_START 0x8016
1549 #define MBA_DCBX_COMPLETE 0x8030
1550 #define MBA_FCF_CONF_ERR 0x8031
1551 #define MBA_DCBX_PARAM_UPDATE 0x8032
1552 #define MBA_IDC_COMPLETE 0x8100
1553 #define MBA_IDC_NOTIFY 0x8101
1554 #define MBA_IDC_TIME_EXT 0x8102
1555
1556 #define MBC_IDC_ACK 0x101
1557 #define MBC_RESTART_MPI_FW 0x3d
1558 #define MBC_FLASH_ACCESS_CTRL 0x3e /* Control flash access. */
1559 #define MBC_GET_XGMAC_STATS 0x7a
1560 #define MBC_GET_DCBX_PARAMS 0x51
1561
1562 /*
1563 * ISP83xx mailbox commands
1564 */
1565 #define MBC_WRITE_REMOTE_REG 0x0001 /* Write remote register */
1566 #define MBC_READ_REMOTE_REG 0x0009 /* Read remote register */
1567 #define MBC_RESTART_NIC_FIRMWARE 0x003d /* Restart NIC firmware */
1568 #define MBC_SET_ACCESS_CONTROL 0x003e /* Access control command */
1569
1570 /* Flash access control option field bit definitions */
1571 #define FAC_OPT_FORCE_SEMAPHORE BIT_15
1572 #define FAC_OPT_REQUESTOR_ID BIT_14
1573 #define FAC_OPT_CMD_SUBCODE 0xff
1574
1575 /* Flash access control command subcodes */
1576 #define FAC_OPT_CMD_WRITE_PROTECT 0x00
1577 #define FAC_OPT_CMD_WRITE_ENABLE 0x01
1578 #define FAC_OPT_CMD_ERASE_SECTOR 0x02
1579 #define FAC_OPT_CMD_LOCK_SEMAPHORE 0x03
1580 #define FAC_OPT_CMD_UNLOCK_SEMAPHORE 0x04
1581 #define FAC_OPT_CMD_GET_SECTOR_SIZE 0x05
1582
1583 struct nvram_81xx {
1584 /* NVRAM header. */
1585 uint8_t id[4];
1586 uint16_t nvram_version;
1587 uint16_t reserved_0;
1588
1589 /* Firmware Initialization Control Block. */
1590 uint16_t version;
1591 uint16_t reserved_1;
1592 uint16_t frame_payload_size;
1593 uint16_t execution_throttle;
1594 uint16_t exchange_count;
1595 uint16_t reserved_2;
1596
1597 uint8_t port_name[WWN_SIZE];
1598 uint8_t node_name[WWN_SIZE];
1599
1600 uint16_t login_retry_count;
1601 uint16_t reserved_3;
1602 uint16_t interrupt_delay_timer;
1603 uint16_t login_timeout;
1604
1605 uint32_t firmware_options_1;
1606 uint32_t firmware_options_2;
1607 uint32_t firmware_options_3;
1608
1609 uint16_t reserved_4[4];
1610
1611 /* Offset 64. */
1612 uint8_t enode_mac[6];
1613 uint16_t reserved_5[5];
1614
1615 /* Offset 80. */
1616 uint16_t reserved_6[24];
1617
1618 /* Offset 128. */
1619 uint16_t ex_version;
1620 uint8_t prio_fcf_matching_flags;
1621 uint8_t reserved_6_1[3];
1622 uint16_t pri_fcf_vlan_id;
1623 uint8_t pri_fcf_fabric_name[8];
1624 uint16_t reserved_6_2[7];
1625 uint8_t spma_mac_addr[6];
1626 uint16_t reserved_6_3[14];
1627
1628 /* Offset 192. */
1629 uint16_t reserved_7[32];
1630
1631 /*
1632 * BIT 0 = Enable spinup delay
1633 * BIT 1 = Disable BIOS
1634 * BIT 2 = Enable Memory Map BIOS
1635 * BIT 3 = Enable Selectable Boot
1636 * BIT 4 = Disable RISC code load
1637 * BIT 5 = Disable Serdes
1638 * BIT 6 = Opt boot mode
1639 * BIT 7 = Interrupt enable
1640 *
1641 * BIT 8 = EV Control enable
1642 * BIT 9 = Enable lip reset
1643 * BIT 10 = Enable lip full login
1644 * BIT 11 = Enable target reset
1645 * BIT 12 = Stop firmware
1646 * BIT 13 = Enable nodename option
1647 * BIT 14 = Default WWPN valid
1648 * BIT 15 = Enable alternate WWN
1649 *
1650 * BIT 16 = CLP LUN string
1651 * BIT 17 = CLP Target string
1652 * BIT 18 = CLP BIOS enable string
1653 * BIT 19 = CLP Serdes string
1654 * BIT 20 = CLP WWPN string
1655 * BIT 21 = CLP WWNN string
1656 * BIT 22 =
1657 * BIT 23 =
1658 * BIT 24 = Keep WWPN
1659 * BIT 25 = Temp WWPN
1660 * BIT 26-31 =
1661 */
1662 uint32_t host_p;
1663
1664 uint8_t alternate_port_name[WWN_SIZE];
1665 uint8_t alternate_node_name[WWN_SIZE];
1666
1667 uint8_t boot_port_name[WWN_SIZE];
1668 uint16_t boot_lun_number;
1669 uint16_t reserved_8;
1670
1671 uint8_t alt1_boot_port_name[WWN_SIZE];
1672 uint16_t alt1_boot_lun_number;
1673 uint16_t reserved_9;
1674
1675 uint8_t alt2_boot_port_name[WWN_SIZE];
1676 uint16_t alt2_boot_lun_number;
1677 uint16_t reserved_10;
1678
1679 uint8_t alt3_boot_port_name[WWN_SIZE];
1680 uint16_t alt3_boot_lun_number;
1681 uint16_t reserved_11;
1682
1683 /*
1684 * BIT 0 = Selective Login
1685 * BIT 1 = Alt-Boot Enable
1686 * BIT 2 = Reserved
1687 * BIT 3 = Boot Order List
1688 * BIT 4 = Reserved
1689 * BIT 5 = Selective LUN
1690 * BIT 6 = Reserved
1691 * BIT 7-31 =
1692 */
1693 uint32_t efi_parameters;
1694
1695 uint8_t reset_delay;
1696 uint8_t reserved_12;
1697 uint16_t reserved_13;
1698
1699 uint16_t boot_id_number;
1700 uint16_t reserved_14;
1701
1702 uint16_t max_luns_per_target;
1703 uint16_t reserved_15;
1704
1705 uint16_t port_down_retry_count;
1706 uint16_t link_down_timeout;
1707
1708 /* FCode parameters. */
1709 uint16_t fcode_parameter;
1710
1711 uint16_t reserved_16[3];
1712
1713 /* Offset 352. */
1714 uint8_t reserved_17[4];
1715 uint16_t reserved_18[5];
1716 uint8_t reserved_19[2];
1717 uint16_t reserved_20[8];
1718
1719 /* Offset 384. */
1720 uint8_t reserved_21[16];
1721 uint16_t reserved_22[3];
1722
1723 /*
1724 * BIT 0 = Extended BB credits for LR
1725 * BIT 1 = Virtual Fabric Enable
1726 * BIT 2 = Enhanced Features Unused
1727 * BIT 3-7 = Enhanced Features Reserved
1728 */
1729 /* Enhanced Features */
1730 uint8_t enhanced_features;
1731
1732 uint8_t reserved_23;
1733 uint16_t reserved_24[4];
1734
1735 /* Offset 416. */
1736 uint16_t reserved_25[32];
1737
1738 /* Offset 480. */
1739 uint8_t model_name[16];
1740
1741 /* Offset 496. */
1742 uint16_t feature_mask_l;
1743 uint16_t feature_mask_h;
1744 uint16_t reserved_26[2];
1745
1746 uint16_t subsystem_vendor_id;
1747 uint16_t subsystem_device_id;
1748
1749 uint32_t checksum;
1750 };
1751
1752 /*
1753 * ISP Initialization Control Block.
1754 * Little endian except where noted.
1755 */
1756 #define ICB_VERSION 1
1757 struct init_cb_81xx {
1758 uint16_t version;
1759 uint16_t reserved_1;
1760
1761 uint16_t frame_payload_size;
1762 uint16_t execution_throttle;
1763 uint16_t exchange_count;
1764
1765 uint16_t reserved_2;
1766
1767 uint8_t port_name[WWN_SIZE]; /* Big endian. */
1768 uint8_t node_name[WWN_SIZE]; /* Big endian. */
1769
1770 uint16_t response_q_inpointer;
1771 uint16_t request_q_outpointer;
1772
1773 uint16_t login_retry_count;
1774
1775 uint16_t prio_request_q_outpointer;
1776
1777 uint16_t response_q_length;
1778 uint16_t request_q_length;
1779
1780 uint16_t reserved_3;
1781
1782 uint16_t prio_request_q_length;
1783
1784 uint32_t request_q_address[2];
1785 uint32_t response_q_address[2];
1786 uint32_t prio_request_q_address[2];
1787
1788 uint8_t reserved_4[8];
1789
1790 uint16_t atio_q_inpointer;
1791 uint16_t atio_q_length;
1792 uint32_t atio_q_address[2];
1793
1794 uint16_t interrupt_delay_timer; /* 100us increments. */
1795 uint16_t login_timeout;
1796
1797 /*
1798 * BIT 0-3 = Reserved
1799 * BIT 4 = Enable Target Mode
1800 * BIT 5 = Disable Initiator Mode
1801 * BIT 6 = Reserved
1802 * BIT 7 = Reserved
1803 *
1804 * BIT 8-13 = Reserved
1805 * BIT 14 = Node Name Option
1806 * BIT 15-31 = Reserved
1807 */
1808 uint32_t firmware_options_1;
1809
1810 /*
1811 * BIT 0 = Operation Mode bit 0
1812 * BIT 1 = Operation Mode bit 1
1813 * BIT 2 = Operation Mode bit 2
1814 * BIT 3 = Operation Mode bit 3
1815 * BIT 4-7 = Reserved
1816 *
1817 * BIT 8 = Enable Class 2
1818 * BIT 9 = Enable ACK0
1819 * BIT 10 = Reserved
1820 * BIT 11 = Enable FC-SP Security
1821 * BIT 12 = FC Tape Enable
1822 * BIT 13 = Reserved
1823 * BIT 14 = Enable Target PRLI Control
1824 * BIT 15-31 = Reserved
1825 */
1826 uint32_t firmware_options_2;
1827
1828 /*
1829 * BIT 0-3 = Reserved
1830 * BIT 4 = FCP RSP Payload bit 0
1831 * BIT 5 = FCP RSP Payload bit 1
1832 * BIT 6 = Enable Receive Out-of-Order data frame handling
1833 * BIT 7 = Reserved
1834 *
1835 * BIT 8 = Reserved
1836 * BIT 9 = Enable Out-of-Order FCP_XFER_RDY relative offset handling
1837 * BIT 10-16 = Reserved
1838 * BIT 17 = Enable multiple FCFs
1839 * BIT 18-20 = MAC addressing mode
1840 * BIT 21-25 = Ethernet data rate
1841 * BIT 26 = Enable ethernet header rx IOCB for ATIO q
1842 * BIT 27 = Enable ethernet header rx IOCB for response q
1843 * BIT 28 = SPMA selection bit 0
1844 * BIT 28 = SPMA selection bit 1
1845 * BIT 30-31 = Reserved
1846 */
1847 uint32_t firmware_options_3;
1848
1849 uint8_t reserved_5[8];
1850
1851 uint8_t enode_mac[6];
1852
1853 uint8_t reserved_6[10];
1854 };
1855
1856 struct mid_init_cb_81xx {
1857 struct init_cb_81xx init_cb;
1858
1859 uint16_t count;
1860 uint16_t options;
1861
1862 struct mid_conf_entry_24xx entries[MAX_MULTI_ID_FABRIC];
1863 };
1864
1865 struct ex_init_cb_81xx {
1866 uint16_t ex_version;
1867 uint8_t prio_fcf_matching_flags;
1868 uint8_t reserved_1[3];
1869 uint16_t pri_fcf_vlan_id;
1870 uint8_t pri_fcf_fabric_name[8];
1871 uint16_t reserved_2[7];
1872 uint8_t spma_mac_addr[6];
1873 uint16_t reserved_3[14];
1874 };
1875
1876 #define FARX_ACCESS_FLASH_CONF_81XX 0x7FFD0000
1877 #define FARX_ACCESS_FLASH_DATA_81XX 0x7F800000
1878
1879 /* FCP priority config defines *************************************/
1880 /* operations */
1881 #define QLFC_FCP_PRIO_DISABLE 0x0
1882 #define QLFC_FCP_PRIO_ENABLE 0x1
1883 #define QLFC_FCP_PRIO_GET_CONFIG 0x2
1884 #define QLFC_FCP_PRIO_SET_CONFIG 0x3
1885
1886 struct qla_fcp_prio_entry {
1887 uint16_t flags; /* Describes parameter(s) in FCP */
1888 /* priority entry that are valid */
1889 #define FCP_PRIO_ENTRY_VALID 0x1
1890 #define FCP_PRIO_ENTRY_TAG_VALID 0x2
1891 #define FCP_PRIO_ENTRY_SPID_VALID 0x4
1892 #define FCP_PRIO_ENTRY_DPID_VALID 0x8
1893 #define FCP_PRIO_ENTRY_LUNB_VALID 0x10
1894 #define FCP_PRIO_ENTRY_LUNE_VALID 0x20
1895 #define FCP_PRIO_ENTRY_SWWN_VALID 0x40
1896 #define FCP_PRIO_ENTRY_DWWN_VALID 0x80
1897 uint8_t tag; /* Priority value */
1898 uint8_t reserved; /* Reserved for future use */
1899 uint32_t src_pid; /* Src port id. high order byte */
1900 /* unused; -1 (wild card) */
1901 uint32_t dst_pid; /* Src port id. high order byte */
1902 /* unused; -1 (wild card) */
1903 uint16_t lun_beg; /* 1st lun num of lun range. */
1904 /* -1 (wild card) */
1905 uint16_t lun_end; /* 2nd lun num of lun range. */
1906 /* -1 (wild card) */
1907 uint8_t src_wwpn[8]; /* Source WWPN: -1 (wild card) */
1908 uint8_t dst_wwpn[8]; /* Destination WWPN: -1 (wild card) */
1909 };
1910
1911 struct qla_fcp_prio_cfg {
1912 uint8_t signature[4]; /* "HQOS" signature of config data */
1913 uint16_t version; /* 1: Initial version */
1914 uint16_t length; /* config data size in num bytes */
1915 uint16_t checksum; /* config data bytes checksum */
1916 uint16_t num_entries; /* Number of entries */
1917 uint16_t size_of_entry; /* Size of each entry in num bytes */
1918 uint8_t attributes; /* enable/disable, persistence */
1919 #define FCP_PRIO_ATTR_DISABLE 0x0
1920 #define FCP_PRIO_ATTR_ENABLE 0x1
1921 #define FCP_PRIO_ATTR_PERSIST 0x2
1922 uint8_t reserved; /* Reserved for future use */
1923 #define FCP_PRIO_CFG_HDR_SIZE 0x10
1924 struct qla_fcp_prio_entry entry[1]; /* fcp priority entries */
1925 #define FCP_PRIO_CFG_ENTRY_SIZE 0x20
1926 };
1927
1928 #define FCP_PRIO_CFG_SIZE (32*1024) /* fcp prio data per port*/
1929
1930 /* 25XX Support ****************************************************/
1931 #define FA_FCP_PRIO0_ADDR_25 0x3C000
1932 #define FA_FCP_PRIO1_ADDR_25 0x3E000
1933
1934 /* 81XX Flash locations -- occupies second 2MB region. */
1935 #define FA_BOOT_CODE_ADDR_81 0x80000
1936 #define FA_RISC_CODE_ADDR_81 0xA0000
1937 #define FA_FW_AREA_ADDR_81 0xC0000
1938 #define FA_VPD_NVRAM_ADDR_81 0xD0000
1939 #define FA_VPD0_ADDR_81 0xD0000
1940 #define FA_VPD1_ADDR_81 0xD0400
1941 #define FA_NVRAM0_ADDR_81 0xD0080
1942 #define FA_NVRAM1_ADDR_81 0xD0180
1943 #define FA_FEATURE_ADDR_81 0xD4000
1944 #define FA_FLASH_DESCR_ADDR_81 0xD8000
1945 #define FA_FLASH_LAYOUT_ADDR_81 0xD8400
1946 #define FA_HW_EVENT0_ADDR_81 0xDC000
1947 #define FA_HW_EVENT1_ADDR_81 0xDC400
1948 #define FA_NPIV_CONF0_ADDR_81 0xD1000
1949 #define FA_NPIV_CONF1_ADDR_81 0xD2000
1950
1951 /* 83XX Flash locations -- occupies second 8MB region. */
1952 #define FA_FLASH_LAYOUT_ADDR_83 0xFC400
1953
1954 #endif
Linux with added FPC-III support