1 /* $NetBSD: elinkxlvar.h,v 1.19 2008/04/14 20:03:13 spz Exp $ */
4 * Copyright (c) 1998 The NetBSD Foundation, Inc.
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Frank van der Linden.
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
39 * Ethernet software status per interface.
45 struct ethercom sc_ethercom
; /* Ethernet common part */
46 bus_space_tag_t sc_iot
; /* bus cookie */
47 bus_space_handle_t sc_ioh
; /* bus i/o handle */
48 bus_dma_tag_t sc_dmat
; /* bus dma tag */
49 bus_dmamap_t sc_dpd_dmamap
;
50 bus_dmamap_t sc_upd_dmamap
;
51 #define sc_upddma sc_upd_dmamap->dm_segs[0].ds_addr
52 #define sc_dpddma sc_dpd_dmamap->dm_segs[0].ds_addr
53 struct ex_upd
*sc_upd
;
54 struct ex_dpd
*sc_dpd
;
55 bus_dmamap_t sc_tx_dmamaps
[EX_NDPD
]; /* DMA maps for DPDs */
56 bus_dmamap_t sc_rx_dmamaps
[EX_NUPD
]; /* DMA maps for UPDs */
57 struct ex_rxdesc sc_rxdescs
[EX_NUPD
];
58 struct ex_txdesc sc_txdescs
[EX_NDPD
];
60 struct ex_rxdesc
*rx_head
;
61 struct ex_rxdesc
*rx_tail
;
63 struct ex_txdesc
*tx_head
;
64 struct ex_txdesc
*tx_tail
;
65 struct ex_txdesc
*tx_free
;
66 struct ex_txdesc
*tx_ftail
;
68 int tx_start_thresh
; /* Current TX_start_thresh. */
69 int tx_succ_ok
; /* # packets sent in sequence */
71 u_int ex_connectors
; /* Connectors on this card. */
72 mii_data_t ex_mii
; /* mii bus data */
73 struct callout ex_mii_callout
; /* mii callout */
74 u_int ex_conf
; /* config flags */
76 #define EX_CONF_MII 0x0001 /* has MII bus */
77 #define EX_CONF_INTPHY 0x0002 /* has internal PHY */
78 #define EX_CONF_90XB 0x0004 /* is 90xB */
79 #define EX_CONF_INV_LED_POLARITY 0x0010 /* CardBus & MiniPCI: LED polarity */
80 #define EX_CONF_PHY_POWER 0x0020 /* CardBus & MiniPCI: PHY power */
81 #define EX_CONF_EEPROM_OFF 0x0040 /* EEPROM is offset by 0x30 */
82 #define EX_CONF_EEPROM_8BIT 0x0080 /* 8 bit EEPROM */
83 #define EX_CONF_PCI_FUNCREG 0x0100 /* Has PCI function registers */
84 #define EX_CONF_RESETHACK 0x0200 /* Hack to make reset work on 556B */
85 #define EX_CONF_NO_XCVR_PWR 0x0400 /* Hack to enable later 556B xcvr */
87 #define EX_XCVR_PWR_MAGICBITS 0x0900 /* NO_XCVR_PWR magic value */
91 * XXX code duplication from elink3var.h
93 u_int ex_flags
; /* capabilities flag (from EEPROM) */
94 #define EX_FLAGS_PNP 0x0001
95 #define EX_FLAGS_FULLDUPLEX 0x0002
96 #define EX_FLAGS_LARGEPKT 0x0004 /* 4k packet support */
97 #define EX_FLAGS_SLAVEDMA 0x0008
98 #define EX_FLAGS_SECONDDMA 0x0010
99 #define EX_FLAGS_FULLDMA 0x0020
100 #define EX_FLAGS_FRAGMENTDMA 0x0040
101 #define EX_FLAGS_CRC_PASSTHRU 0x0080
102 #define EX_FLAGS_TXDONE 0x0100
103 #define EX_FLAGS_NO_TXLENGTH 0x0200
104 #define EX_FLAGS_RXREPEAT 0x0400
105 #define EX_FLAGS_SNOOPING 0x0800
106 #define EX_FLAGS_100MBIT 0x1000
107 #define EX_FLAGS_POWERMGMT 0x2000
108 #define EX_FLAGS_ATTACHED 0x4000 /* attach has succeeded */
110 u_char ex_bustype
; /* parent bus type (currently unused) */
113 #define EX_BUS_CARDBUS 1
116 rndsource_element_t rnd_source
;
119 /* power management hooks */
120 int (*enable
)(struct ex_softc
*);
121 void (*disable
)(struct ex_softc
*);
124 /* interrupt acknowledge hook */
125 void (*intr_ack
)(struct ex_softc
*);
127 bus_dma_segment_t sc_useg
, sc_dseg
;
128 int sc_urseg
, sc_drseg
;
133 #define ex_waitcmd(sc) \
137 stat = bus_space_read_2((sc)->sc_iot, (sc)->sc_ioh, \
139 } while ((stat & COMMAND_IN_PROGRESS) && (stat != 0xffff)); \
142 u_int16_t exreadeeprom(bus_space_tag_t, bus_space_handle_t, int);
143 void ex_config(struct ex_softc
*);
146 void ex_stop(struct ifnet
*, int);
147 void ex_watchdog(struct ifnet
*);
148 int ex_ioctl(struct ifnet
*ifp
, u_long
, void *);
149 int ex_activate(device_t
, enum devact
);
150 int ex_detach(struct ex_softc
*);
152 int ex_enable(struct ex_softc
*);
153 void ex_disable(struct ex_softc
*);