4 * This code is licensed under the GNU GPL v2 or later.
6 * SPDX-License-Identifier: GPL-2.0-or-later
9 #include "qemu/osdep.h"
10 #include "qemu/units.h"
11 #include "target/arm/idau.h"
14 #include "internals.h"
15 #include "exec/gdbstub.h"
16 #include "exec/helper-proto.h"
17 #include "qemu/host-utils.h"
18 #include "qemu/main-loop.h"
19 #include "qemu/bitops.h"
20 #include "qemu/crc32c.h"
21 #include "qemu/qemu-print.h"
22 #include "exec/exec-all.h"
23 #include <zlib.h> /* For crc32 */
25 #include "hw/semihosting/semihost.h"
26 #include "sysemu/cpus.h"
27 #include "sysemu/kvm.h"
28 #include "sysemu/tcg.h"
29 #include "qemu/range.h"
30 #include "qapi/qapi-commands-machine-target.h"
31 #include "qapi/error.h"
32 #include "qemu/guest-random.h"
35 #include "exec/cpu_ldst.h"
38 #define ARM_CPU_FREQ 1000000000 /* FIXME: 1 GHz, should be configurable */
40 #ifndef CONFIG_USER_ONLY
42 static bool get_phys_addr_lpae(CPUARMState
*env
, target_ulong address
,
43 MMUAccessType access_type
, ARMMMUIdx mmu_idx
,
45 hwaddr
*phys_ptr
, MemTxAttrs
*txattrs
, int *prot
,
46 target_ulong
*page_size_ptr
,
47 ARMMMUFaultInfo
*fi
, ARMCacheAttrs
*cacheattrs
)
48 __attribute__((nonnull
));
51 static void switch_mode(CPUARMState
*env
, int mode
);
53 static int vfp_gdb_get_reg(CPUARMState
*env
, GByteArray
*buf
, int reg
)
55 ARMCPU
*cpu
= env_archcpu(env
);
56 int nregs
= cpu_isar_feature(aa32_simd_r32
, cpu
) ? 32 : 16;
58 /* VFP data registers are always little-endian. */
60 return gdb_get_reg64(buf
, *aa32_vfp_dreg(env
, reg
));
62 if (arm_feature(env
, ARM_FEATURE_NEON
)) {
63 /* Aliases for Q regs. */
66 uint64_t *q
= aa32_vfp_qreg(env
, reg
- 32);
67 return gdb_get_reg128(buf
, q
[0], q
[1]);
70 switch (reg
- nregs
) {
71 case 0: return gdb_get_reg32(buf
, env
->vfp
.xregs
[ARM_VFP_FPSID
]); break;
72 case 1: return gdb_get_reg32(buf
, vfp_get_fpscr(env
)); break;
73 case 2: return gdb_get_reg32(buf
, env
->vfp
.xregs
[ARM_VFP_FPEXC
]); break;
78 static int vfp_gdb_set_reg(CPUARMState
*env
, uint8_t *buf
, int reg
)
80 ARMCPU
*cpu
= env_archcpu(env
);
81 int nregs
= cpu_isar_feature(aa32_simd_r32
, cpu
) ? 32 : 16;
84 *aa32_vfp_dreg(env
, reg
) = ldq_le_p(buf
);
87 if (arm_feature(env
, ARM_FEATURE_NEON
)) {
90 uint64_t *q
= aa32_vfp_qreg(env
, reg
- 32);
92 q
[1] = ldq_le_p(buf
+ 8);
96 switch (reg
- nregs
) {
97 case 0: env
->vfp
.xregs
[ARM_VFP_FPSID
] = ldl_p(buf
); return 4;
98 case 1: vfp_set_fpscr(env
, ldl_p(buf
)); return 4;
99 case 2: env
->vfp
.xregs
[ARM_VFP_FPEXC
] = ldl_p(buf
) & (1 << 30); return 4;
104 static int aarch64_fpu_gdb_get_reg(CPUARMState
*env
, GByteArray
*buf
, int reg
)
109 /* 128 bit FP register - quads are in LE order */
110 uint64_t *q
= aa64_vfp_qreg(env
, reg
);
111 return gdb_get_reg128(buf
, q
[1], q
[0]);
115 return gdb_get_reg32(buf
, vfp_get_fpsr(env
));
118 return gdb_get_reg32(buf
,vfp_get_fpcr(env
));
124 static int aarch64_fpu_gdb_set_reg(CPUARMState
*env
, uint8_t *buf
, int reg
)
128 /* 128 bit FP register */
130 uint64_t *q
= aa64_vfp_qreg(env
, reg
);
131 q
[0] = ldq_le_p(buf
);
132 q
[1] = ldq_le_p(buf
+ 8);
137 vfp_set_fpsr(env
, ldl_p(buf
));
141 vfp_set_fpcr(env
, ldl_p(buf
));
148 static uint64_t raw_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
150 assert(ri
->fieldoffset
);
151 if (cpreg_field_is_64bit(ri
)) {
152 return CPREG_FIELD64(env
, ri
);
154 return CPREG_FIELD32(env
, ri
);
158 static void raw_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
161 assert(ri
->fieldoffset
);
162 if (cpreg_field_is_64bit(ri
)) {
163 CPREG_FIELD64(env
, ri
) = value
;
165 CPREG_FIELD32(env
, ri
) = value
;
169 static void *raw_ptr(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
171 return (char *)env
+ ri
->fieldoffset
;
174 uint64_t read_raw_cp_reg(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
176 /* Raw read of a coprocessor register (as needed for migration, etc). */
177 if (ri
->type
& ARM_CP_CONST
) {
178 return ri
->resetvalue
;
179 } else if (ri
->raw_readfn
) {
180 return ri
->raw_readfn(env
, ri
);
181 } else if (ri
->readfn
) {
182 return ri
->readfn(env
, ri
);
184 return raw_read(env
, ri
);
188 static void write_raw_cp_reg(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
191 /* Raw write of a coprocessor register (as needed for migration, etc).
192 * Note that constant registers are treated as write-ignored; the
193 * caller should check for success by whether a readback gives the
196 if (ri
->type
& ARM_CP_CONST
) {
198 } else if (ri
->raw_writefn
) {
199 ri
->raw_writefn(env
, ri
, v
);
200 } else if (ri
->writefn
) {
201 ri
->writefn(env
, ri
, v
);
203 raw_write(env
, ri
, v
);
208 * arm_get/set_gdb_*: get/set a gdb register
209 * @env: the CPU state
210 * @buf: a buffer to copy to/from
211 * @reg: register number (offset from start of group)
213 * We return the number of bytes copied
216 static int arm_gdb_get_sysreg(CPUARMState
*env
, GByteArray
*buf
, int reg
)
218 ARMCPU
*cpu
= env_archcpu(env
);
219 const ARMCPRegInfo
*ri
;
222 key
= cpu
->dyn_sysreg_xml
.data
.cpregs
.keys
[reg
];
223 ri
= get_arm_cp_reginfo(cpu
->cp_regs
, key
);
225 if (cpreg_field_is_64bit(ri
)) {
226 return gdb_get_reg64(buf
, (uint64_t)read_raw_cp_reg(env
, ri
));
228 return gdb_get_reg32(buf
, (uint32_t)read_raw_cp_reg(env
, ri
));
234 static int arm_gdb_set_sysreg(CPUARMState
*env
, uint8_t *buf
, int reg
)
239 #ifdef TARGET_AARCH64
240 static int arm_gdb_get_svereg(CPUARMState
*env
, GByteArray
*buf
, int reg
)
242 ARMCPU
*cpu
= env_archcpu(env
);
245 /* The first 32 registers are the zregs */
249 for (vq
= 0; vq
< cpu
->sve_max_vq
; vq
++) {
250 len
+= gdb_get_reg128(buf
,
251 env
->vfp
.zregs
[reg
].d
[vq
* 2 + 1],
252 env
->vfp
.zregs
[reg
].d
[vq
* 2]);
257 return gdb_get_reg32(buf
, vfp_get_fpsr(env
));
259 return gdb_get_reg32(buf
, vfp_get_fpcr(env
));
260 /* then 16 predicates and the ffr */
265 for (vq
= 0; vq
< cpu
->sve_max_vq
; vq
= vq
+ 4) {
266 len
+= gdb_get_reg64(buf
, env
->vfp
.pregs
[preg
].p
[vq
/ 4]);
273 * We report in Vector Granules (VG) which is 64bit in a Z reg
274 * while the ZCR works in Vector Quads (VQ) which is 128bit chunks.
276 int vq
= sve_zcr_len_for_el(env
, arm_current_el(env
)) + 1;
277 return gdb_get_reg32(buf
, vq
* 2);
280 /* gdbstub asked for something out our range */
281 qemu_log_mask(LOG_UNIMP
, "%s: out of range register %d", __func__
, reg
);
288 static int arm_gdb_set_svereg(CPUARMState
*env
, uint8_t *buf
, int reg
)
290 ARMCPU
*cpu
= env_archcpu(env
);
292 /* The first 32 registers are the zregs */
294 /* The first 32 registers are the zregs */
298 uint64_t *p
= (uint64_t *) buf
;
299 for (vq
= 0; vq
< cpu
->sve_max_vq
; vq
++) {
300 env
->vfp
.zregs
[reg
].d
[vq
* 2 + 1] = *p
++;
301 env
->vfp
.zregs
[reg
].d
[vq
* 2] = *p
++;
307 vfp_set_fpsr(env
, *(uint32_t *)buf
);
310 vfp_set_fpcr(env
, *(uint32_t *)buf
);
316 uint64_t *p
= (uint64_t *) buf
;
317 for (vq
= 0; vq
< cpu
->sve_max_vq
; vq
= vq
+ 4) {
318 env
->vfp
.pregs
[preg
].p
[vq
/ 4] = *p
++;
324 /* cannot set vg via gdbstub */
327 /* gdbstub asked for something out our range */
333 #endif /* TARGET_AARCH64 */
335 static bool raw_accessors_invalid(const ARMCPRegInfo
*ri
)
337 /* Return true if the regdef would cause an assertion if you called
338 * read_raw_cp_reg() or write_raw_cp_reg() on it (ie if it is a
339 * program bug for it not to have the NO_RAW flag).
340 * NB that returning false here doesn't necessarily mean that calling
341 * read/write_raw_cp_reg() is safe, because we can't distinguish "has
342 * read/write access functions which are safe for raw use" from "has
343 * read/write access functions which have side effects but has forgotten
344 * to provide raw access functions".
345 * The tests here line up with the conditions in read/write_raw_cp_reg()
346 * and assertions in raw_read()/raw_write().
348 if ((ri
->type
& ARM_CP_CONST
) ||
350 ((ri
->raw_writefn
|| ri
->writefn
) && (ri
->raw_readfn
|| ri
->readfn
))) {
356 bool write_cpustate_to_list(ARMCPU
*cpu
, bool kvm_sync
)
358 /* Write the coprocessor state from cpu->env to the (index,value) list. */
362 for (i
= 0; i
< cpu
->cpreg_array_len
; i
++) {
363 uint32_t regidx
= kvm_to_cpreg_id(cpu
->cpreg_indexes
[i
]);
364 const ARMCPRegInfo
*ri
;
367 ri
= get_arm_cp_reginfo(cpu
->cp_regs
, regidx
);
372 if (ri
->type
& ARM_CP_NO_RAW
) {
376 newval
= read_raw_cp_reg(&cpu
->env
, ri
);
379 * Only sync if the previous list->cpustate sync succeeded.
380 * Rather than tracking the success/failure state for every
381 * item in the list, we just recheck "does the raw write we must
382 * have made in write_list_to_cpustate() read back OK" here.
384 uint64_t oldval
= cpu
->cpreg_values
[i
];
386 if (oldval
== newval
) {
390 write_raw_cp_reg(&cpu
->env
, ri
, oldval
);
391 if (read_raw_cp_reg(&cpu
->env
, ri
) != oldval
) {
395 write_raw_cp_reg(&cpu
->env
, ri
, newval
);
397 cpu
->cpreg_values
[i
] = newval
;
402 bool write_list_to_cpustate(ARMCPU
*cpu
)
407 for (i
= 0; i
< cpu
->cpreg_array_len
; i
++) {
408 uint32_t regidx
= kvm_to_cpreg_id(cpu
->cpreg_indexes
[i
]);
409 uint64_t v
= cpu
->cpreg_values
[i
];
410 const ARMCPRegInfo
*ri
;
412 ri
= get_arm_cp_reginfo(cpu
->cp_regs
, regidx
);
417 if (ri
->type
& ARM_CP_NO_RAW
) {
420 /* Write value and confirm it reads back as written
421 * (to catch read-only registers and partially read-only
422 * registers where the incoming migration value doesn't match)
424 write_raw_cp_reg(&cpu
->env
, ri
, v
);
425 if (read_raw_cp_reg(&cpu
->env
, ri
) != v
) {
432 static void add_cpreg_to_list(gpointer key
, gpointer opaque
)
434 ARMCPU
*cpu
= opaque
;
436 const ARMCPRegInfo
*ri
;
438 regidx
= *(uint32_t *)key
;
439 ri
= get_arm_cp_reginfo(cpu
->cp_regs
, regidx
);
441 if (!(ri
->type
& (ARM_CP_NO_RAW
|ARM_CP_ALIAS
))) {
442 cpu
->cpreg_indexes
[cpu
->cpreg_array_len
] = cpreg_to_kvm_id(regidx
);
443 /* The value array need not be initialized at this point */
444 cpu
->cpreg_array_len
++;
448 static void count_cpreg(gpointer key
, gpointer opaque
)
450 ARMCPU
*cpu
= opaque
;
452 const ARMCPRegInfo
*ri
;
454 regidx
= *(uint32_t *)key
;
455 ri
= get_arm_cp_reginfo(cpu
->cp_regs
, regidx
);
457 if (!(ri
->type
& (ARM_CP_NO_RAW
|ARM_CP_ALIAS
))) {
458 cpu
->cpreg_array_len
++;
462 static gint
cpreg_key_compare(gconstpointer a
, gconstpointer b
)
464 uint64_t aidx
= cpreg_to_kvm_id(*(uint32_t *)a
);
465 uint64_t bidx
= cpreg_to_kvm_id(*(uint32_t *)b
);
476 void init_cpreg_list(ARMCPU
*cpu
)
478 /* Initialise the cpreg_tuples[] array based on the cp_regs hash.
479 * Note that we require cpreg_tuples[] to be sorted by key ID.
484 keys
= g_hash_table_get_keys(cpu
->cp_regs
);
485 keys
= g_list_sort(keys
, cpreg_key_compare
);
487 cpu
->cpreg_array_len
= 0;
489 g_list_foreach(keys
, count_cpreg
, cpu
);
491 arraylen
= cpu
->cpreg_array_len
;
492 cpu
->cpreg_indexes
= g_new(uint64_t, arraylen
);
493 cpu
->cpreg_values
= g_new(uint64_t, arraylen
);
494 cpu
->cpreg_vmstate_indexes
= g_new(uint64_t, arraylen
);
495 cpu
->cpreg_vmstate_values
= g_new(uint64_t, arraylen
);
496 cpu
->cpreg_vmstate_array_len
= cpu
->cpreg_array_len
;
497 cpu
->cpreg_array_len
= 0;
499 g_list_foreach(keys
, add_cpreg_to_list
, cpu
);
501 assert(cpu
->cpreg_array_len
== arraylen
);
507 * Some registers are not accessible from AArch32 EL3 if SCR.NS == 0.
509 static CPAccessResult
access_el3_aa32ns(CPUARMState
*env
,
510 const ARMCPRegInfo
*ri
,
513 if (!is_a64(env
) && arm_current_el(env
) == 3 &&
514 arm_is_secure_below_el3(env
)) {
515 return CP_ACCESS_TRAP_UNCATEGORIZED
;
520 /* Some secure-only AArch32 registers trap to EL3 if used from
521 * Secure EL1 (but are just ordinary UNDEF in other non-EL3 contexts).
522 * Note that an access from Secure EL1 can only happen if EL3 is AArch64.
523 * We assume that the .access field is set to PL1_RW.
525 static CPAccessResult
access_trap_aa32s_el1(CPUARMState
*env
,
526 const ARMCPRegInfo
*ri
,
529 if (arm_current_el(env
) == 3) {
532 if (arm_is_secure_below_el3(env
)) {
533 return CP_ACCESS_TRAP_EL3
;
535 /* This will be EL1 NS and EL2 NS, which just UNDEF */
536 return CP_ACCESS_TRAP_UNCATEGORIZED
;
539 /* Check for traps to "powerdown debug" registers, which are controlled
542 static CPAccessResult
access_tdosa(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
545 int el
= arm_current_el(env
);
546 bool mdcr_el2_tdosa
= (env
->cp15
.mdcr_el2
& MDCR_TDOSA
) ||
547 (env
->cp15
.mdcr_el2
& MDCR_TDE
) ||
548 (arm_hcr_el2_eff(env
) & HCR_TGE
);
550 if (el
< 2 && mdcr_el2_tdosa
&& !arm_is_secure_below_el3(env
)) {
551 return CP_ACCESS_TRAP_EL2
;
553 if (el
< 3 && (env
->cp15
.mdcr_el3
& MDCR_TDOSA
)) {
554 return CP_ACCESS_TRAP_EL3
;
559 /* Check for traps to "debug ROM" registers, which are controlled
560 * by MDCR_EL2.TDRA for EL2 but by the more general MDCR_EL3.TDA for EL3.
562 static CPAccessResult
access_tdra(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
565 int el
= arm_current_el(env
);
566 bool mdcr_el2_tdra
= (env
->cp15
.mdcr_el2
& MDCR_TDRA
) ||
567 (env
->cp15
.mdcr_el2
& MDCR_TDE
) ||
568 (arm_hcr_el2_eff(env
) & HCR_TGE
);
570 if (el
< 2 && mdcr_el2_tdra
&& !arm_is_secure_below_el3(env
)) {
571 return CP_ACCESS_TRAP_EL2
;
573 if (el
< 3 && (env
->cp15
.mdcr_el3
& MDCR_TDA
)) {
574 return CP_ACCESS_TRAP_EL3
;
579 /* Check for traps to general debug registers, which are controlled
580 * by MDCR_EL2.TDA for EL2 and MDCR_EL3.TDA for EL3.
582 static CPAccessResult
access_tda(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
585 int el
= arm_current_el(env
);
586 bool mdcr_el2_tda
= (env
->cp15
.mdcr_el2
& MDCR_TDA
) ||
587 (env
->cp15
.mdcr_el2
& MDCR_TDE
) ||
588 (arm_hcr_el2_eff(env
) & HCR_TGE
);
590 if (el
< 2 && mdcr_el2_tda
&& !arm_is_secure_below_el3(env
)) {
591 return CP_ACCESS_TRAP_EL2
;
593 if (el
< 3 && (env
->cp15
.mdcr_el3
& MDCR_TDA
)) {
594 return CP_ACCESS_TRAP_EL3
;
599 /* Check for traps to performance monitor registers, which are controlled
600 * by MDCR_EL2.TPM for EL2 and MDCR_EL3.TPM for EL3.
602 static CPAccessResult
access_tpm(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
605 int el
= arm_current_el(env
);
607 if (el
< 2 && (env
->cp15
.mdcr_el2
& MDCR_TPM
)
608 && !arm_is_secure_below_el3(env
)) {
609 return CP_ACCESS_TRAP_EL2
;
611 if (el
< 3 && (env
->cp15
.mdcr_el3
& MDCR_TPM
)) {
612 return CP_ACCESS_TRAP_EL3
;
617 /* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */
618 static CPAccessResult
access_tvm_trvm(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
621 if (arm_current_el(env
) == 1) {
622 uint64_t trap
= isread
? HCR_TRVM
: HCR_TVM
;
623 if (arm_hcr_el2_eff(env
) & trap
) {
624 return CP_ACCESS_TRAP_EL2
;
630 /* Check for traps from EL1 due to HCR_EL2.TSW. */
631 static CPAccessResult
access_tsw(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
634 if (arm_current_el(env
) == 1 && (arm_hcr_el2_eff(env
) & HCR_TSW
)) {
635 return CP_ACCESS_TRAP_EL2
;
640 /* Check for traps from EL1 due to HCR_EL2.TACR. */
641 static CPAccessResult
access_tacr(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
644 if (arm_current_el(env
) == 1 && (arm_hcr_el2_eff(env
) & HCR_TACR
)) {
645 return CP_ACCESS_TRAP_EL2
;
650 /* Check for traps from EL1 due to HCR_EL2.TTLB. */
651 static CPAccessResult
access_ttlb(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
654 if (arm_current_el(env
) == 1 && (arm_hcr_el2_eff(env
) & HCR_TTLB
)) {
655 return CP_ACCESS_TRAP_EL2
;
660 static void dacr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
, uint64_t value
)
662 ARMCPU
*cpu
= env_archcpu(env
);
664 raw_write(env
, ri
, value
);
665 tlb_flush(CPU(cpu
)); /* Flush TLB as domain not tracked in TLB */
668 static void fcse_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
, uint64_t value
)
670 ARMCPU
*cpu
= env_archcpu(env
);
672 if (raw_read(env
, ri
) != value
) {
673 /* Unlike real hardware the qemu TLB uses virtual addresses,
674 * not modified virtual addresses, so this causes a TLB flush.
677 raw_write(env
, ri
, value
);
681 static void contextidr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
684 ARMCPU
*cpu
= env_archcpu(env
);
686 if (raw_read(env
, ri
) != value
&& !arm_feature(env
, ARM_FEATURE_PMSA
)
687 && !extended_addresses_enabled(env
)) {
688 /* For VMSA (when not using the LPAE long descriptor page table
689 * format) this register includes the ASID, so do a TLB flush.
690 * For PMSA it is purely a process ID and no action is needed.
694 raw_write(env
, ri
, value
);
697 /* IS variants of TLB operations must affect all cores */
698 static void tlbiall_is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
701 CPUState
*cs
= env_cpu(env
);
703 tlb_flush_all_cpus_synced(cs
);
706 static void tlbiasid_is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
709 CPUState
*cs
= env_cpu(env
);
711 tlb_flush_all_cpus_synced(cs
);
714 static void tlbimva_is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
717 CPUState
*cs
= env_cpu(env
);
719 tlb_flush_page_all_cpus_synced(cs
, value
& TARGET_PAGE_MASK
);
722 static void tlbimvaa_is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
725 CPUState
*cs
= env_cpu(env
);
727 tlb_flush_page_all_cpus_synced(cs
, value
& TARGET_PAGE_MASK
);
731 * Non-IS variants of TLB operations are upgraded to
732 * IS versions if we are at NS EL1 and HCR_EL2.FB is set to
733 * force broadcast of these operations.
735 static bool tlb_force_broadcast(CPUARMState
*env
)
737 return (env
->cp15
.hcr_el2
& HCR_FB
) &&
738 arm_current_el(env
) == 1 && arm_is_secure_below_el3(env
);
741 static void tlbiall_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
744 /* Invalidate all (TLBIALL) */
745 CPUState
*cs
= env_cpu(env
);
747 if (tlb_force_broadcast(env
)) {
748 tlb_flush_all_cpus_synced(cs
);
754 static void tlbimva_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
757 /* Invalidate single TLB entry by MVA and ASID (TLBIMVA) */
758 CPUState
*cs
= env_cpu(env
);
760 value
&= TARGET_PAGE_MASK
;
761 if (tlb_force_broadcast(env
)) {
762 tlb_flush_page_all_cpus_synced(cs
, value
);
764 tlb_flush_page(cs
, value
);
768 static void tlbiasid_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
771 /* Invalidate by ASID (TLBIASID) */
772 CPUState
*cs
= env_cpu(env
);
774 if (tlb_force_broadcast(env
)) {
775 tlb_flush_all_cpus_synced(cs
);
781 static void tlbimvaa_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
784 /* Invalidate single entry by MVA, all ASIDs (TLBIMVAA) */
785 CPUState
*cs
= env_cpu(env
);
787 value
&= TARGET_PAGE_MASK
;
788 if (tlb_force_broadcast(env
)) {
789 tlb_flush_page_all_cpus_synced(cs
, value
);
791 tlb_flush_page(cs
, value
);
795 static void tlbiall_nsnh_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
798 CPUState
*cs
= env_cpu(env
);
800 tlb_flush_by_mmuidx(cs
,
802 ARMMMUIdxBit_E10_1_PAN
|
806 static void tlbiall_nsnh_is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
809 CPUState
*cs
= env_cpu(env
);
811 tlb_flush_by_mmuidx_all_cpus_synced(cs
,
813 ARMMMUIdxBit_E10_1_PAN
|
818 static void tlbiall_hyp_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
821 CPUState
*cs
= env_cpu(env
);
823 tlb_flush_by_mmuidx(cs
, ARMMMUIdxBit_E2
);
826 static void tlbiall_hyp_is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
829 CPUState
*cs
= env_cpu(env
);
831 tlb_flush_by_mmuidx_all_cpus_synced(cs
, ARMMMUIdxBit_E2
);
834 static void tlbimva_hyp_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
837 CPUState
*cs
= env_cpu(env
);
838 uint64_t pageaddr
= value
& ~MAKE_64BIT_MASK(0, 12);
840 tlb_flush_page_by_mmuidx(cs
, pageaddr
, ARMMMUIdxBit_E2
);
843 static void tlbimva_hyp_is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
846 CPUState
*cs
= env_cpu(env
);
847 uint64_t pageaddr
= value
& ~MAKE_64BIT_MASK(0, 12);
849 tlb_flush_page_by_mmuidx_all_cpus_synced(cs
, pageaddr
,
853 static const ARMCPRegInfo cp_reginfo
[] = {
854 /* Define the secure and non-secure FCSE identifier CP registers
855 * separately because there is no secure bank in V8 (no _EL3). This allows
856 * the secure register to be properly reset and migrated. There is also no
857 * v8 EL1 version of the register so the non-secure instance stands alone.
860 .cp
= 15, .opc1
= 0, .crn
= 13, .crm
= 0, .opc2
= 0,
861 .access
= PL1_RW
, .secure
= ARM_CP_SECSTATE_NS
,
862 .fieldoffset
= offsetof(CPUARMState
, cp15
.fcseidr_ns
),
863 .resetvalue
= 0, .writefn
= fcse_write
, .raw_writefn
= raw_write
, },
864 { .name
= "FCSEIDR_S",
865 .cp
= 15, .opc1
= 0, .crn
= 13, .crm
= 0, .opc2
= 0,
866 .access
= PL1_RW
, .secure
= ARM_CP_SECSTATE_S
,
867 .fieldoffset
= offsetof(CPUARMState
, cp15
.fcseidr_s
),
868 .resetvalue
= 0, .writefn
= fcse_write
, .raw_writefn
= raw_write
, },
869 /* Define the secure and non-secure context identifier CP registers
870 * separately because there is no secure bank in V8 (no _EL3). This allows
871 * the secure register to be properly reset and migrated. In the
872 * non-secure case, the 32-bit register will have reset and migration
873 * disabled during registration as it is handled by the 64-bit instance.
875 { .name
= "CONTEXTIDR_EL1", .state
= ARM_CP_STATE_BOTH
,
876 .opc0
= 3, .opc1
= 0, .crn
= 13, .crm
= 0, .opc2
= 1,
877 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
878 .secure
= ARM_CP_SECSTATE_NS
,
879 .fieldoffset
= offsetof(CPUARMState
, cp15
.contextidr_el
[1]),
880 .resetvalue
= 0, .writefn
= contextidr_write
, .raw_writefn
= raw_write
, },
881 { .name
= "CONTEXTIDR_S", .state
= ARM_CP_STATE_AA32
,
882 .cp
= 15, .opc1
= 0, .crn
= 13, .crm
= 0, .opc2
= 1,
883 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
884 .secure
= ARM_CP_SECSTATE_S
,
885 .fieldoffset
= offsetof(CPUARMState
, cp15
.contextidr_s
),
886 .resetvalue
= 0, .writefn
= contextidr_write
, .raw_writefn
= raw_write
, },
890 static const ARMCPRegInfo not_v8_cp_reginfo
[] = {
891 /* NB: Some of these registers exist in v8 but with more precise
892 * definitions that don't use CP_ANY wildcards (mostly in v8_cp_reginfo[]).
894 /* MMU Domain access control / MPU write buffer control */
896 .cp
= 15, .opc1
= CP_ANY
, .crn
= 3, .crm
= CP_ANY
, .opc2
= CP_ANY
,
897 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
, .resetvalue
= 0,
898 .writefn
= dacr_write
, .raw_writefn
= raw_write
,
899 .bank_fieldoffsets
= { offsetoflow32(CPUARMState
, cp15
.dacr_s
),
900 offsetoflow32(CPUARMState
, cp15
.dacr_ns
) } },
901 /* ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs.
902 * For v6 and v5, these mappings are overly broad.
904 { .name
= "TLB_LOCKDOWN", .cp
= 15, .crn
= 10, .crm
= 0,
905 .opc1
= CP_ANY
, .opc2
= CP_ANY
, .access
= PL1_RW
, .type
= ARM_CP_NOP
},
906 { .name
= "TLB_LOCKDOWN", .cp
= 15, .crn
= 10, .crm
= 1,
907 .opc1
= CP_ANY
, .opc2
= CP_ANY
, .access
= PL1_RW
, .type
= ARM_CP_NOP
},
908 { .name
= "TLB_LOCKDOWN", .cp
= 15, .crn
= 10, .crm
= 4,
909 .opc1
= CP_ANY
, .opc2
= CP_ANY
, .access
= PL1_RW
, .type
= ARM_CP_NOP
},
910 { .name
= "TLB_LOCKDOWN", .cp
= 15, .crn
= 10, .crm
= 8,
911 .opc1
= CP_ANY
, .opc2
= CP_ANY
, .access
= PL1_RW
, .type
= ARM_CP_NOP
},
912 /* Cache maintenance ops; some of this space may be overridden later. */
913 { .name
= "CACHEMAINT", .cp
= 15, .crn
= 7, .crm
= CP_ANY
,
914 .opc1
= 0, .opc2
= CP_ANY
, .access
= PL1_W
,
915 .type
= ARM_CP_NOP
| ARM_CP_OVERRIDE
},
919 static const ARMCPRegInfo not_v6_cp_reginfo
[] = {
920 /* Not all pre-v6 cores implemented this WFI, so this is slightly
923 { .name
= "WFI_v5", .cp
= 15, .crn
= 7, .crm
= 8, .opc1
= 0, .opc2
= 2,
924 .access
= PL1_W
, .type
= ARM_CP_WFI
},
928 static const ARMCPRegInfo not_v7_cp_reginfo
[] = {
929 /* Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which
930 * is UNPREDICTABLE; we choose to NOP as most implementations do).
932 { .name
= "WFI_v6", .cp
= 15, .crn
= 7, .crm
= 0, .opc1
= 0, .opc2
= 4,
933 .access
= PL1_W
, .type
= ARM_CP_WFI
},
934 /* L1 cache lockdown. Not architectural in v6 and earlier but in practice
935 * implemented in 926, 946, 1026, 1136, 1176 and 11MPCore. StrongARM and
936 * OMAPCP will override this space.
938 { .name
= "DLOCKDOWN", .cp
= 15, .crn
= 9, .crm
= 0, .opc1
= 0, .opc2
= 0,
939 .access
= PL1_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.c9_data
),
941 { .name
= "ILOCKDOWN", .cp
= 15, .crn
= 9, .crm
= 0, .opc1
= 0, .opc2
= 1,
942 .access
= PL1_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.c9_insn
),
944 /* v6 doesn't have the cache ID registers but Linux reads them anyway */
945 { .name
= "DUMMY", .cp
= 15, .crn
= 0, .crm
= 0, .opc1
= 1, .opc2
= CP_ANY
,
946 .access
= PL1_R
, .type
= ARM_CP_CONST
| ARM_CP_NO_RAW
,
948 /* We don't implement pre-v7 debug but most CPUs had at least a DBGDIDR;
949 * implementing it as RAZ means the "debug architecture version" bits
950 * will read as a reserved value, which should cause Linux to not try
951 * to use the debug hardware.
953 { .name
= "DBGDIDR", .cp
= 14, .crn
= 0, .crm
= 0, .opc1
= 0, .opc2
= 0,
954 .access
= PL0_R
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
955 /* MMU TLB control. Note that the wildcarding means we cover not just
956 * the unified TLB ops but also the dside/iside/inner-shareable variants.
958 { .name
= "TLBIALL", .cp
= 15, .crn
= 8, .crm
= CP_ANY
,
959 .opc1
= CP_ANY
, .opc2
= 0, .access
= PL1_W
, .writefn
= tlbiall_write
,
960 .type
= ARM_CP_NO_RAW
},
961 { .name
= "TLBIMVA", .cp
= 15, .crn
= 8, .crm
= CP_ANY
,
962 .opc1
= CP_ANY
, .opc2
= 1, .access
= PL1_W
, .writefn
= tlbimva_write
,
963 .type
= ARM_CP_NO_RAW
},
964 { .name
= "TLBIASID", .cp
= 15, .crn
= 8, .crm
= CP_ANY
,
965 .opc1
= CP_ANY
, .opc2
= 2, .access
= PL1_W
, .writefn
= tlbiasid_write
,
966 .type
= ARM_CP_NO_RAW
},
967 { .name
= "TLBIMVAA", .cp
= 15, .crn
= 8, .crm
= CP_ANY
,
968 .opc1
= CP_ANY
, .opc2
= 3, .access
= PL1_W
, .writefn
= tlbimvaa_write
,
969 .type
= ARM_CP_NO_RAW
},
970 { .name
= "PRRR", .cp
= 15, .crn
= 10, .crm
= 2,
971 .opc1
= 0, .opc2
= 0, .access
= PL1_RW
, .type
= ARM_CP_NOP
},
972 { .name
= "NMRR", .cp
= 15, .crn
= 10, .crm
= 2,
973 .opc1
= 0, .opc2
= 1, .access
= PL1_RW
, .type
= ARM_CP_NOP
},
977 static void cpacr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
982 /* In ARMv8 most bits of CPACR_EL1 are RES0. */
983 if (!arm_feature(env
, ARM_FEATURE_V8
)) {
984 /* ARMv7 defines bits for unimplemented coprocessors as RAZ/WI.
985 * ASEDIS [31] and D32DIS [30] are both UNK/SBZP without VFP.
986 * TRCDIS [28] is RAZ/WI since we do not implement a trace macrocell.
988 if (cpu_isar_feature(aa32_vfp_simd
, env_archcpu(env
))) {
989 /* VFP coprocessor: cp10 & cp11 [23:20] */
990 mask
|= (1 << 31) | (1 << 30) | (0xf << 20);
992 if (!arm_feature(env
, ARM_FEATURE_NEON
)) {
993 /* ASEDIS [31] bit is RAO/WI */
997 /* VFPv3 and upwards with NEON implement 32 double precision
998 * registers (D0-D31).
1000 if (!cpu_isar_feature(aa32_simd_r32
, env_archcpu(env
))) {
1001 /* D32DIS [30] is RAO/WI if D16-31 are not implemented. */
1009 * For A-profile AArch32 EL3 (but not M-profile secure mode), if NSACR.CP10
1010 * is 0 then CPACR.{CP11,CP10} ignore writes and read as 0b00.
1012 if (arm_feature(env
, ARM_FEATURE_EL3
) && !arm_el_is_aa64(env
, 3) &&
1013 !arm_is_secure(env
) && !extract32(env
->cp15
.nsacr
, 10, 1)) {
1014 value
&= ~(0xf << 20);
1015 value
|= env
->cp15
.cpacr_el1
& (0xf << 20);
1018 env
->cp15
.cpacr_el1
= value
;
1021 static uint64_t cpacr_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
1024 * For A-profile AArch32 EL3 (but not M-profile secure mode), if NSACR.CP10
1025 * is 0 then CPACR.{CP11,CP10} ignore writes and read as 0b00.
1027 uint64_t value
= env
->cp15
.cpacr_el1
;
1029 if (arm_feature(env
, ARM_FEATURE_EL3
) && !arm_el_is_aa64(env
, 3) &&
1030 !arm_is_secure(env
) && !extract32(env
->cp15
.nsacr
, 10, 1)) {
1031 value
&= ~(0xf << 20);
1037 static void cpacr_reset(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
1039 /* Call cpacr_write() so that we reset with the correct RAO bits set
1040 * for our CPU features.
1042 cpacr_write(env
, ri
, 0);
1045 static CPAccessResult
cpacr_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1048 if (arm_feature(env
, ARM_FEATURE_V8
)) {
1049 /* Check if CPACR accesses are to be trapped to EL2 */
1050 if (arm_current_el(env
) == 1 &&
1051 (env
->cp15
.cptr_el
[2] & CPTR_TCPAC
) && !arm_is_secure(env
)) {
1052 return CP_ACCESS_TRAP_EL2
;
1053 /* Check if CPACR accesses are to be trapped to EL3 */
1054 } else if (arm_current_el(env
) < 3 &&
1055 (env
->cp15
.cptr_el
[3] & CPTR_TCPAC
)) {
1056 return CP_ACCESS_TRAP_EL3
;
1060 return CP_ACCESS_OK
;
1063 static CPAccessResult
cptr_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1066 /* Check if CPTR accesses are set to trap to EL3 */
1067 if (arm_current_el(env
) == 2 && (env
->cp15
.cptr_el
[3] & CPTR_TCPAC
)) {
1068 return CP_ACCESS_TRAP_EL3
;
1071 return CP_ACCESS_OK
;
1074 static const ARMCPRegInfo v6_cp_reginfo
[] = {
1075 /* prefetch by MVA in v6, NOP in v7 */
1076 { .name
= "MVA_prefetch",
1077 .cp
= 15, .crn
= 7, .crm
= 13, .opc1
= 0, .opc2
= 1,
1078 .access
= PL1_W
, .type
= ARM_CP_NOP
},
1079 /* We need to break the TB after ISB to execute self-modifying code
1080 * correctly and also to take any pending interrupts immediately.
1081 * So use arm_cp_write_ignore() function instead of ARM_CP_NOP flag.
1083 { .name
= "ISB", .cp
= 15, .crn
= 7, .crm
= 5, .opc1
= 0, .opc2
= 4,
1084 .access
= PL0_W
, .type
= ARM_CP_NO_RAW
, .writefn
= arm_cp_write_ignore
},
1085 { .name
= "DSB", .cp
= 15, .crn
= 7, .crm
= 10, .opc1
= 0, .opc2
= 4,
1086 .access
= PL0_W
, .type
= ARM_CP_NOP
},
1087 { .name
= "DMB", .cp
= 15, .crn
= 7, .crm
= 10, .opc1
= 0, .opc2
= 5,
1088 .access
= PL0_W
, .type
= ARM_CP_NOP
},
1089 { .name
= "IFAR", .cp
= 15, .crn
= 6, .crm
= 0, .opc1
= 0, .opc2
= 2,
1090 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
1091 .bank_fieldoffsets
= { offsetof(CPUARMState
, cp15
.ifar_s
),
1092 offsetof(CPUARMState
, cp15
.ifar_ns
) },
1094 /* Watchpoint Fault Address Register : should actually only be present
1095 * for 1136, 1176, 11MPCore.
1097 { .name
= "WFAR", .cp
= 15, .crn
= 6, .crm
= 0, .opc1
= 0, .opc2
= 1,
1098 .access
= PL1_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0, },
1099 { .name
= "CPACR", .state
= ARM_CP_STATE_BOTH
, .opc0
= 3,
1100 .crn
= 1, .crm
= 0, .opc1
= 0, .opc2
= 2, .accessfn
= cpacr_access
,
1101 .access
= PL1_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.cpacr_el1
),
1102 .resetfn
= cpacr_reset
, .writefn
= cpacr_write
, .readfn
= cpacr_read
},
1106 /* Definitions for the PMU registers */
1107 #define PMCRN_MASK 0xf800
1108 #define PMCRN_SHIFT 11
1117 * Mask of PMCR bits writeable by guest (not including WO bits like C, P,
1118 * which can be written as 1 to trigger behaviour but which stay RAZ).
1120 #define PMCR_WRITEABLE_MASK (PMCRLC | PMCRDP | PMCRX | PMCRD | PMCRE)
1122 #define PMXEVTYPER_P 0x80000000
1123 #define PMXEVTYPER_U 0x40000000
1124 #define PMXEVTYPER_NSK 0x20000000
1125 #define PMXEVTYPER_NSU 0x10000000
1126 #define PMXEVTYPER_NSH 0x08000000
1127 #define PMXEVTYPER_M 0x04000000
1128 #define PMXEVTYPER_MT 0x02000000
1129 #define PMXEVTYPER_EVTCOUNT 0x0000ffff
1130 #define PMXEVTYPER_MASK (PMXEVTYPER_P | PMXEVTYPER_U | PMXEVTYPER_NSK | \
1131 PMXEVTYPER_NSU | PMXEVTYPER_NSH | \
1132 PMXEVTYPER_M | PMXEVTYPER_MT | \
1133 PMXEVTYPER_EVTCOUNT)
1135 #define PMCCFILTR 0xf8000000
1136 #define PMCCFILTR_M PMXEVTYPER_M
1137 #define PMCCFILTR_EL0 (PMCCFILTR | PMCCFILTR_M)
1139 static inline uint32_t pmu_num_counters(CPUARMState
*env
)
1141 return (env
->cp15
.c9_pmcr
& PMCRN_MASK
) >> PMCRN_SHIFT
;
1144 /* Bits allowed to be set/cleared for PMCNTEN* and PMINTEN* */
1145 static inline uint64_t pmu_counter_mask(CPUARMState
*env
)
1147 return (1 << 31) | ((1 << pmu_num_counters(env
)) - 1);
1150 typedef struct pm_event
{
1151 uint16_t number
; /* PMEVTYPER.evtCount is 16 bits wide */
1152 /* If the event is supported on this CPU (used to generate PMCEID[01]) */
1153 bool (*supported
)(CPUARMState
*);
1155 * Retrieve the current count of the underlying event. The programmed
1156 * counters hold a difference from the return value from this function
1158 uint64_t (*get_count
)(CPUARMState
*);
1160 * Return how many nanoseconds it will take (at a minimum) for count events
1161 * to occur. A negative value indicates the counter will never overflow, or
1162 * that the counter has otherwise arranged for the overflow bit to be set
1163 * and the PMU interrupt to be raised on overflow.
1165 int64_t (*ns_per_count
)(uint64_t);
1168 static bool event_always_supported(CPUARMState
*env
)
1173 static uint64_t swinc_get_count(CPUARMState
*env
)
1176 * SW_INCR events are written directly to the pmevcntr's by writes to
1177 * PMSWINC, so there is no underlying count maintained by the PMU itself
1182 static int64_t swinc_ns_per(uint64_t ignored
)
1188 * Return the underlying cycle count for the PMU cycle counters. If we're in
1189 * usermode, simply return 0.
1191 static uint64_t cycles_get_count(CPUARMState
*env
)
1193 #ifndef CONFIG_USER_ONLY
1194 return muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL
),
1195 ARM_CPU_FREQ
, NANOSECONDS_PER_SECOND
);
1197 return cpu_get_host_ticks();
1201 #ifndef CONFIG_USER_ONLY
1202 static int64_t cycles_ns_per(uint64_t cycles
)
1204 return (ARM_CPU_FREQ
/ NANOSECONDS_PER_SECOND
) * cycles
;
1207 static bool instructions_supported(CPUARMState
*env
)
1209 return use_icount
== 1 /* Precise instruction counting */;
1212 static uint64_t instructions_get_count(CPUARMState
*env
)
1214 return (uint64_t)cpu_get_icount_raw();
1217 static int64_t instructions_ns_per(uint64_t icount
)
1219 return cpu_icount_to_ns((int64_t)icount
);
1223 static bool pmu_8_1_events_supported(CPUARMState
*env
)
1225 /* For events which are supported in any v8.1 PMU */
1226 return cpu_isar_feature(any_pmu_8_1
, env_archcpu(env
));
1229 static bool pmu_8_4_events_supported(CPUARMState
*env
)
1231 /* For events which are supported in any v8.1 PMU */
1232 return cpu_isar_feature(any_pmu_8_4
, env_archcpu(env
));
1235 static uint64_t zero_event_get_count(CPUARMState
*env
)
1237 /* For events which on QEMU never fire, so their count is always zero */
1241 static int64_t zero_event_ns_per(uint64_t cycles
)
1243 /* An event which never fires can never overflow */
1247 static const pm_event pm_events
[] = {
1248 { .number
= 0x000, /* SW_INCR */
1249 .supported
= event_always_supported
,
1250 .get_count
= swinc_get_count
,
1251 .ns_per_count
= swinc_ns_per
,
1253 #ifndef CONFIG_USER_ONLY
1254 { .number
= 0x008, /* INST_RETIRED, Instruction architecturally executed */
1255 .supported
= instructions_supported
,
1256 .get_count
= instructions_get_count
,
1257 .ns_per_count
= instructions_ns_per
,
1259 { .number
= 0x011, /* CPU_CYCLES, Cycle */
1260 .supported
= event_always_supported
,
1261 .get_count
= cycles_get_count
,
1262 .ns_per_count
= cycles_ns_per
,
1265 { .number
= 0x023, /* STALL_FRONTEND */
1266 .supported
= pmu_8_1_events_supported
,
1267 .get_count
= zero_event_get_count
,
1268 .ns_per_count
= zero_event_ns_per
,
1270 { .number
= 0x024, /* STALL_BACKEND */
1271 .supported
= pmu_8_1_events_supported
,
1272 .get_count
= zero_event_get_count
,
1273 .ns_per_count
= zero_event_ns_per
,
1275 { .number
= 0x03c, /* STALL */
1276 .supported
= pmu_8_4_events_supported
,
1277 .get_count
= zero_event_get_count
,
1278 .ns_per_count
= zero_event_ns_per
,
1283 * Note: Before increasing MAX_EVENT_ID beyond 0x3f into the 0x40xx range of
1284 * events (i.e. the statistical profiling extension), this implementation
1285 * should first be updated to something sparse instead of the current
1286 * supported_event_map[] array.
1288 #define MAX_EVENT_ID 0x3c
1289 #define UNSUPPORTED_EVENT UINT16_MAX
1290 static uint16_t supported_event_map
[MAX_EVENT_ID
+ 1];
1293 * Called upon CPU initialization to initialize PMCEID[01]_EL0 and build a map
1294 * of ARM event numbers to indices in our pm_events array.
1296 * Note: Events in the 0x40XX range are not currently supported.
1298 void pmu_init(ARMCPU
*cpu
)
1303 * Empty supported_event_map and cpu->pmceid[01] before adding supported
1306 for (i
= 0; i
< ARRAY_SIZE(supported_event_map
); i
++) {
1307 supported_event_map
[i
] = UNSUPPORTED_EVENT
;
1312 for (i
= 0; i
< ARRAY_SIZE(pm_events
); i
++) {
1313 const pm_event
*cnt
= &pm_events
[i
];
1314 assert(cnt
->number
<= MAX_EVENT_ID
);
1315 /* We do not currently support events in the 0x40xx range */
1316 assert(cnt
->number
<= 0x3f);
1318 if (cnt
->supported(&cpu
->env
)) {
1319 supported_event_map
[cnt
->number
] = i
;
1320 uint64_t event_mask
= 1ULL << (cnt
->number
& 0x1f);
1321 if (cnt
->number
& 0x20) {
1322 cpu
->pmceid1
|= event_mask
;
1324 cpu
->pmceid0
|= event_mask
;
1331 * Check at runtime whether a PMU event is supported for the current machine
1333 static bool event_supported(uint16_t number
)
1335 if (number
> MAX_EVENT_ID
) {
1338 return supported_event_map
[number
] != UNSUPPORTED_EVENT
;
1341 static CPAccessResult
pmreg_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1344 /* Performance monitor registers user accessibility is controlled
1345 * by PMUSERENR. MDCR_EL2.TPM and MDCR_EL3.TPM allow configurable
1346 * trapping to EL2 or EL3 for other accesses.
1348 int el
= arm_current_el(env
);
1350 if (el
== 0 && !(env
->cp15
.c9_pmuserenr
& 1)) {
1351 return CP_ACCESS_TRAP
;
1353 if (el
< 2 && (env
->cp15
.mdcr_el2
& MDCR_TPM
)
1354 && !arm_is_secure_below_el3(env
)) {
1355 return CP_ACCESS_TRAP_EL2
;
1357 if (el
< 3 && (env
->cp15
.mdcr_el3
& MDCR_TPM
)) {
1358 return CP_ACCESS_TRAP_EL3
;
1361 return CP_ACCESS_OK
;
1364 static CPAccessResult
pmreg_access_xevcntr(CPUARMState
*env
,
1365 const ARMCPRegInfo
*ri
,
1368 /* ER: event counter read trap control */
1369 if (arm_feature(env
, ARM_FEATURE_V8
)
1370 && arm_current_el(env
) == 0
1371 && (env
->cp15
.c9_pmuserenr
& (1 << 3)) != 0
1373 return CP_ACCESS_OK
;
1376 return pmreg_access(env
, ri
, isread
);
1379 static CPAccessResult
pmreg_access_swinc(CPUARMState
*env
,
1380 const ARMCPRegInfo
*ri
,
1383 /* SW: software increment write trap control */
1384 if (arm_feature(env
, ARM_FEATURE_V8
)
1385 && arm_current_el(env
) == 0
1386 && (env
->cp15
.c9_pmuserenr
& (1 << 1)) != 0
1388 return CP_ACCESS_OK
;
1391 return pmreg_access(env
, ri
, isread
);
1394 static CPAccessResult
pmreg_access_selr(CPUARMState
*env
,
1395 const ARMCPRegInfo
*ri
,
1398 /* ER: event counter read trap control */
1399 if (arm_feature(env
, ARM_FEATURE_V8
)
1400 && arm_current_el(env
) == 0
1401 && (env
->cp15
.c9_pmuserenr
& (1 << 3)) != 0) {
1402 return CP_ACCESS_OK
;
1405 return pmreg_access(env
, ri
, isread
);
1408 static CPAccessResult
pmreg_access_ccntr(CPUARMState
*env
,
1409 const ARMCPRegInfo
*ri
,
1412 /* CR: cycle counter read trap control */
1413 if (arm_feature(env
, ARM_FEATURE_V8
)
1414 && arm_current_el(env
) == 0
1415 && (env
->cp15
.c9_pmuserenr
& (1 << 2)) != 0
1417 return CP_ACCESS_OK
;
1420 return pmreg_access(env
, ri
, isread
);
1423 /* Returns true if the counter (pass 31 for PMCCNTR) should count events using
1424 * the current EL, security state, and register configuration.
1426 static bool pmu_counter_enabled(CPUARMState
*env
, uint8_t counter
)
1429 bool e
, p
, u
, nsk
, nsu
, nsh
, m
;
1430 bool enabled
, prohibited
, filtered
;
1431 bool secure
= arm_is_secure(env
);
1432 int el
= arm_current_el(env
);
1433 uint8_t hpmn
= env
->cp15
.mdcr_el2
& MDCR_HPMN
;
1435 if (!arm_feature(env
, ARM_FEATURE_PMU
)) {
1439 if (!arm_feature(env
, ARM_FEATURE_EL2
) ||
1440 (counter
< hpmn
|| counter
== 31)) {
1441 e
= env
->cp15
.c9_pmcr
& PMCRE
;
1443 e
= env
->cp15
.mdcr_el2
& MDCR_HPME
;
1445 enabled
= e
&& (env
->cp15
.c9_pmcnten
& (1 << counter
));
1448 if (el
== 2 && (counter
< hpmn
|| counter
== 31)) {
1449 prohibited
= env
->cp15
.mdcr_el2
& MDCR_HPMD
;
1454 prohibited
= arm_feature(env
, ARM_FEATURE_EL3
) &&
1455 (env
->cp15
.mdcr_el3
& MDCR_SPME
);
1458 if (prohibited
&& counter
== 31) {
1459 prohibited
= env
->cp15
.c9_pmcr
& PMCRDP
;
1462 if (counter
== 31) {
1463 filter
= env
->cp15
.pmccfiltr_el0
;
1465 filter
= env
->cp15
.c14_pmevtyper
[counter
];
1468 p
= filter
& PMXEVTYPER_P
;
1469 u
= filter
& PMXEVTYPER_U
;
1470 nsk
= arm_feature(env
, ARM_FEATURE_EL3
) && (filter
& PMXEVTYPER_NSK
);
1471 nsu
= arm_feature(env
, ARM_FEATURE_EL3
) && (filter
& PMXEVTYPER_NSU
);
1472 nsh
= arm_feature(env
, ARM_FEATURE_EL2
) && (filter
& PMXEVTYPER_NSH
);
1473 m
= arm_el_is_aa64(env
, 1) &&
1474 arm_feature(env
, ARM_FEATURE_EL3
) && (filter
& PMXEVTYPER_M
);
1477 filtered
= secure
? u
: u
!= nsu
;
1478 } else if (el
== 1) {
1479 filtered
= secure
? p
: p
!= nsk
;
1480 } else if (el
== 2) {
1486 if (counter
!= 31) {
1488 * If not checking PMCCNTR, ensure the counter is setup to an event we
1491 uint16_t event
= filter
& PMXEVTYPER_EVTCOUNT
;
1492 if (!event_supported(event
)) {
1497 return enabled
&& !prohibited
&& !filtered
;
1500 static void pmu_update_irq(CPUARMState
*env
)
1502 ARMCPU
*cpu
= env_archcpu(env
);
1503 qemu_set_irq(cpu
->pmu_interrupt
, (env
->cp15
.c9_pmcr
& PMCRE
) &&
1504 (env
->cp15
.c9_pminten
& env
->cp15
.c9_pmovsr
));
1508 * Ensure c15_ccnt is the guest-visible count so that operations such as
1509 * enabling/disabling the counter or filtering, modifying the count itself,
1510 * etc. can be done logically. This is essentially a no-op if the counter is
1511 * not enabled at the time of the call.
1513 static void pmccntr_op_start(CPUARMState
*env
)
1515 uint64_t cycles
= cycles_get_count(env
);
1517 if (pmu_counter_enabled(env
, 31)) {
1518 uint64_t eff_cycles
= cycles
;
1519 if (env
->cp15
.c9_pmcr
& PMCRD
) {
1520 /* Increment once every 64 processor clock cycles */
1524 uint64_t new_pmccntr
= eff_cycles
- env
->cp15
.c15_ccnt_delta
;
1526 uint64_t overflow_mask
= env
->cp15
.c9_pmcr
& PMCRLC
? \
1527 1ull << 63 : 1ull << 31;
1528 if (env
->cp15
.c15_ccnt
& ~new_pmccntr
& overflow_mask
) {
1529 env
->cp15
.c9_pmovsr
|= (1 << 31);
1530 pmu_update_irq(env
);
1533 env
->cp15
.c15_ccnt
= new_pmccntr
;
1535 env
->cp15
.c15_ccnt_delta
= cycles
;
1539 * If PMCCNTR is enabled, recalculate the delta between the clock and the
1540 * guest-visible count. A call to pmccntr_op_finish should follow every call to
1543 static void pmccntr_op_finish(CPUARMState
*env
)
1545 if (pmu_counter_enabled(env
, 31)) {
1546 #ifndef CONFIG_USER_ONLY
1547 /* Calculate when the counter will next overflow */
1548 uint64_t remaining_cycles
= -env
->cp15
.c15_ccnt
;
1549 if (!(env
->cp15
.c9_pmcr
& PMCRLC
)) {
1550 remaining_cycles
= (uint32_t)remaining_cycles
;
1552 int64_t overflow_in
= cycles_ns_per(remaining_cycles
);
1554 if (overflow_in
> 0) {
1555 int64_t overflow_at
= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL
) +
1557 ARMCPU
*cpu
= env_archcpu(env
);
1558 timer_mod_anticipate_ns(cpu
->pmu_timer
, overflow_at
);
1562 uint64_t prev_cycles
= env
->cp15
.c15_ccnt_delta
;
1563 if (env
->cp15
.c9_pmcr
& PMCRD
) {
1564 /* Increment once every 64 processor clock cycles */
1567 env
->cp15
.c15_ccnt_delta
= prev_cycles
- env
->cp15
.c15_ccnt
;
1571 static void pmevcntr_op_start(CPUARMState
*env
, uint8_t counter
)
1574 uint16_t event
= env
->cp15
.c14_pmevtyper
[counter
] & PMXEVTYPER_EVTCOUNT
;
1576 if (event_supported(event
)) {
1577 uint16_t event_idx
= supported_event_map
[event
];
1578 count
= pm_events
[event_idx
].get_count(env
);
1581 if (pmu_counter_enabled(env
, counter
)) {
1582 uint32_t new_pmevcntr
= count
- env
->cp15
.c14_pmevcntr_delta
[counter
];
1584 if (env
->cp15
.c14_pmevcntr
[counter
] & ~new_pmevcntr
& INT32_MIN
) {
1585 env
->cp15
.c9_pmovsr
|= (1 << counter
);
1586 pmu_update_irq(env
);
1588 env
->cp15
.c14_pmevcntr
[counter
] = new_pmevcntr
;
1590 env
->cp15
.c14_pmevcntr_delta
[counter
] = count
;
1593 static void pmevcntr_op_finish(CPUARMState
*env
, uint8_t counter
)
1595 if (pmu_counter_enabled(env
, counter
)) {
1596 #ifndef CONFIG_USER_ONLY
1597 uint16_t event
= env
->cp15
.c14_pmevtyper
[counter
] & PMXEVTYPER_EVTCOUNT
;
1598 uint16_t event_idx
= supported_event_map
[event
];
1599 uint64_t delta
= UINT32_MAX
-
1600 (uint32_t)env
->cp15
.c14_pmevcntr
[counter
] + 1;
1601 int64_t overflow_in
= pm_events
[event_idx
].ns_per_count(delta
);
1603 if (overflow_in
> 0) {
1604 int64_t overflow_at
= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL
) +
1606 ARMCPU
*cpu
= env_archcpu(env
);
1607 timer_mod_anticipate_ns(cpu
->pmu_timer
, overflow_at
);
1611 env
->cp15
.c14_pmevcntr_delta
[counter
] -=
1612 env
->cp15
.c14_pmevcntr
[counter
];
1616 void pmu_op_start(CPUARMState
*env
)
1619 pmccntr_op_start(env
);
1620 for (i
= 0; i
< pmu_num_counters(env
); i
++) {
1621 pmevcntr_op_start(env
, i
);
1625 void pmu_op_finish(CPUARMState
*env
)
1628 pmccntr_op_finish(env
);
1629 for (i
= 0; i
< pmu_num_counters(env
); i
++) {
1630 pmevcntr_op_finish(env
, i
);
1634 void pmu_pre_el_change(ARMCPU
*cpu
, void *ignored
)
1636 pmu_op_start(&cpu
->env
);
1639 void pmu_post_el_change(ARMCPU
*cpu
, void *ignored
)
1641 pmu_op_finish(&cpu
->env
);
1644 void arm_pmu_timer_cb(void *opaque
)
1646 ARMCPU
*cpu
= opaque
;
1649 * Update all the counter values based on the current underlying counts,
1650 * triggering interrupts to be raised, if necessary. pmu_op_finish() also
1651 * has the effect of setting the cpu->pmu_timer to the next earliest time a
1652 * counter may expire.
1654 pmu_op_start(&cpu
->env
);
1655 pmu_op_finish(&cpu
->env
);
1658 static void pmcr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1663 if (value
& PMCRC
) {
1664 /* The counter has been reset */
1665 env
->cp15
.c15_ccnt
= 0;
1668 if (value
& PMCRP
) {
1670 for (i
= 0; i
< pmu_num_counters(env
); i
++) {
1671 env
->cp15
.c14_pmevcntr
[i
] = 0;
1675 env
->cp15
.c9_pmcr
&= ~PMCR_WRITEABLE_MASK
;
1676 env
->cp15
.c9_pmcr
|= (value
& PMCR_WRITEABLE_MASK
);
1681 static void pmswinc_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1685 for (i
= 0; i
< pmu_num_counters(env
); i
++) {
1686 /* Increment a counter's count iff: */
1687 if ((value
& (1 << i
)) && /* counter's bit is set */
1688 /* counter is enabled and not filtered */
1689 pmu_counter_enabled(env
, i
) &&
1690 /* counter is SW_INCR */
1691 (env
->cp15
.c14_pmevtyper
[i
] & PMXEVTYPER_EVTCOUNT
) == 0x0) {
1692 pmevcntr_op_start(env
, i
);
1695 * Detect if this write causes an overflow since we can't predict
1696 * PMSWINC overflows like we can for other events
1698 uint32_t new_pmswinc
= env
->cp15
.c14_pmevcntr
[i
] + 1;
1700 if (env
->cp15
.c14_pmevcntr
[i
] & ~new_pmswinc
& INT32_MIN
) {
1701 env
->cp15
.c9_pmovsr
|= (1 << i
);
1702 pmu_update_irq(env
);
1705 env
->cp15
.c14_pmevcntr
[i
] = new_pmswinc
;
1707 pmevcntr_op_finish(env
, i
);
1712 static uint64_t pmccntr_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
1715 pmccntr_op_start(env
);
1716 ret
= env
->cp15
.c15_ccnt
;
1717 pmccntr_op_finish(env
);
1721 static void pmselr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1724 /* The value of PMSELR.SEL affects the behavior of PMXEVTYPER and
1725 * PMXEVCNTR. We allow [0..31] to be written to PMSELR here; in the
1726 * meanwhile, we check PMSELR.SEL when PMXEVTYPER and PMXEVCNTR are
1729 env
->cp15
.c9_pmselr
= value
& 0x1f;
1732 static void pmccntr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1735 pmccntr_op_start(env
);
1736 env
->cp15
.c15_ccnt
= value
;
1737 pmccntr_op_finish(env
);
1740 static void pmccntr_write32(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1743 uint64_t cur_val
= pmccntr_read(env
, NULL
);
1745 pmccntr_write(env
, ri
, deposit64(cur_val
, 0, 32, value
));
1748 static void pmccfiltr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1751 pmccntr_op_start(env
);
1752 env
->cp15
.pmccfiltr_el0
= value
& PMCCFILTR_EL0
;
1753 pmccntr_op_finish(env
);
1756 static void pmccfiltr_write_a32(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1759 pmccntr_op_start(env
);
1760 /* M is not accessible from AArch32 */
1761 env
->cp15
.pmccfiltr_el0
= (env
->cp15
.pmccfiltr_el0
& PMCCFILTR_M
) |
1762 (value
& PMCCFILTR
);
1763 pmccntr_op_finish(env
);
1766 static uint64_t pmccfiltr_read_a32(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
1768 /* M is not visible in AArch32 */
1769 return env
->cp15
.pmccfiltr_el0
& PMCCFILTR
;
1772 static void pmcntenset_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1775 value
&= pmu_counter_mask(env
);
1776 env
->cp15
.c9_pmcnten
|= value
;
1779 static void pmcntenclr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1782 value
&= pmu_counter_mask(env
);
1783 env
->cp15
.c9_pmcnten
&= ~value
;
1786 static void pmovsr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1789 value
&= pmu_counter_mask(env
);
1790 env
->cp15
.c9_pmovsr
&= ~value
;
1791 pmu_update_irq(env
);
1794 static void pmovsset_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1797 value
&= pmu_counter_mask(env
);
1798 env
->cp15
.c9_pmovsr
|= value
;
1799 pmu_update_irq(env
);
1802 static void pmevtyper_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1803 uint64_t value
, const uint8_t counter
)
1805 if (counter
== 31) {
1806 pmccfiltr_write(env
, ri
, value
);
1807 } else if (counter
< pmu_num_counters(env
)) {
1808 pmevcntr_op_start(env
, counter
);
1811 * If this counter's event type is changing, store the current
1812 * underlying count for the new type in c14_pmevcntr_delta[counter] so
1813 * pmevcntr_op_finish has the correct baseline when it converts back to
1816 uint16_t old_event
= env
->cp15
.c14_pmevtyper
[counter
] &
1817 PMXEVTYPER_EVTCOUNT
;
1818 uint16_t new_event
= value
& PMXEVTYPER_EVTCOUNT
;
1819 if (old_event
!= new_event
) {
1821 if (event_supported(new_event
)) {
1822 uint16_t event_idx
= supported_event_map
[new_event
];
1823 count
= pm_events
[event_idx
].get_count(env
);
1825 env
->cp15
.c14_pmevcntr_delta
[counter
] = count
;
1828 env
->cp15
.c14_pmevtyper
[counter
] = value
& PMXEVTYPER_MASK
;
1829 pmevcntr_op_finish(env
, counter
);
1831 /* Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when
1832 * PMSELR value is equal to or greater than the number of implemented
1833 * counters, but not equal to 0x1f. We opt to behave as a RAZ/WI.
1837 static uint64_t pmevtyper_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1838 const uint8_t counter
)
1840 if (counter
== 31) {
1841 return env
->cp15
.pmccfiltr_el0
;
1842 } else if (counter
< pmu_num_counters(env
)) {
1843 return env
->cp15
.c14_pmevtyper
[counter
];
1846 * We opt to behave as a RAZ/WI when attempts to access PMXEVTYPER
1847 * are CONSTRAINED UNPREDICTABLE. See comments in pmevtyper_write().
1853 static void pmevtyper_writefn(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1856 uint8_t counter
= ((ri
->crm
& 3) << 3) | (ri
->opc2
& 7);
1857 pmevtyper_write(env
, ri
, value
, counter
);
1860 static void pmevtyper_rawwrite(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1863 uint8_t counter
= ((ri
->crm
& 3) << 3) | (ri
->opc2
& 7);
1864 env
->cp15
.c14_pmevtyper
[counter
] = value
;
1867 * pmevtyper_rawwrite is called between a pair of pmu_op_start and
1868 * pmu_op_finish calls when loading saved state for a migration. Because
1869 * we're potentially updating the type of event here, the value written to
1870 * c14_pmevcntr_delta by the preceeding pmu_op_start call may be for a
1871 * different counter type. Therefore, we need to set this value to the
1872 * current count for the counter type we're writing so that pmu_op_finish
1873 * has the correct count for its calculation.
1875 uint16_t event
= value
& PMXEVTYPER_EVTCOUNT
;
1876 if (event_supported(event
)) {
1877 uint16_t event_idx
= supported_event_map
[event
];
1878 env
->cp15
.c14_pmevcntr_delta
[counter
] =
1879 pm_events
[event_idx
].get_count(env
);
1883 static uint64_t pmevtyper_readfn(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
1885 uint8_t counter
= ((ri
->crm
& 3) << 3) | (ri
->opc2
& 7);
1886 return pmevtyper_read(env
, ri
, counter
);
1889 static void pmxevtyper_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1892 pmevtyper_write(env
, ri
, value
, env
->cp15
.c9_pmselr
& 31);
1895 static uint64_t pmxevtyper_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
1897 return pmevtyper_read(env
, ri
, env
->cp15
.c9_pmselr
& 31);
1900 static void pmevcntr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1901 uint64_t value
, uint8_t counter
)
1903 if (counter
< pmu_num_counters(env
)) {
1904 pmevcntr_op_start(env
, counter
);
1905 env
->cp15
.c14_pmevcntr
[counter
] = value
;
1906 pmevcntr_op_finish(env
, counter
);
1909 * We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR
1910 * are CONSTRAINED UNPREDICTABLE.
1914 static uint64_t pmevcntr_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1917 if (counter
< pmu_num_counters(env
)) {
1919 pmevcntr_op_start(env
, counter
);
1920 ret
= env
->cp15
.c14_pmevcntr
[counter
];
1921 pmevcntr_op_finish(env
, counter
);
1924 /* We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR
1925 * are CONSTRAINED UNPREDICTABLE. */
1930 static void pmevcntr_writefn(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1933 uint8_t counter
= ((ri
->crm
& 3) << 3) | (ri
->opc2
& 7);
1934 pmevcntr_write(env
, ri
, value
, counter
);
1937 static uint64_t pmevcntr_readfn(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
1939 uint8_t counter
= ((ri
->crm
& 3) << 3) | (ri
->opc2
& 7);
1940 return pmevcntr_read(env
, ri
, counter
);
1943 static void pmevcntr_rawwrite(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1946 uint8_t counter
= ((ri
->crm
& 3) << 3) | (ri
->opc2
& 7);
1947 assert(counter
< pmu_num_counters(env
));
1948 env
->cp15
.c14_pmevcntr
[counter
] = value
;
1949 pmevcntr_write(env
, ri
, value
, counter
);
1952 static uint64_t pmevcntr_rawread(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
1954 uint8_t counter
= ((ri
->crm
& 3) << 3) | (ri
->opc2
& 7);
1955 assert(counter
< pmu_num_counters(env
));
1956 return env
->cp15
.c14_pmevcntr
[counter
];
1959 static void pmxevcntr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1962 pmevcntr_write(env
, ri
, value
, env
->cp15
.c9_pmselr
& 31);
1965 static uint64_t pmxevcntr_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
1967 return pmevcntr_read(env
, ri
, env
->cp15
.c9_pmselr
& 31);
1970 static void pmuserenr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1973 if (arm_feature(env
, ARM_FEATURE_V8
)) {
1974 env
->cp15
.c9_pmuserenr
= value
& 0xf;
1976 env
->cp15
.c9_pmuserenr
= value
& 1;
1980 static void pmintenset_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1983 /* We have no event counters so only the C bit can be changed */
1984 value
&= pmu_counter_mask(env
);
1985 env
->cp15
.c9_pminten
|= value
;
1986 pmu_update_irq(env
);
1989 static void pmintenclr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
1992 value
&= pmu_counter_mask(env
);
1993 env
->cp15
.c9_pminten
&= ~value
;
1994 pmu_update_irq(env
);
1997 static void vbar_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2000 /* Note that even though the AArch64 view of this register has bits
2001 * [10:0] all RES0 we can only mask the bottom 5, to comply with the
2002 * architectural requirements for bits which are RES0 only in some
2003 * contexts. (ARMv8 would permit us to do no masking at all, but ARMv7
2004 * requires the bottom five bits to be RAZ/WI because they're UNK/SBZP.)
2006 raw_write(env
, ri
, value
& ~0x1FULL
);
2009 static void scr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
, uint64_t value
)
2011 /* Begin with base v8.0 state. */
2012 uint32_t valid_mask
= 0x3fff;
2013 ARMCPU
*cpu
= env_archcpu(env
);
2015 if (ri
->state
== ARM_CP_STATE_AA64
) {
2016 value
|= SCR_FW
| SCR_AW
; /* these two bits are RES1. */
2017 valid_mask
&= ~SCR_NET
;
2019 if (cpu_isar_feature(aa64_lor
, cpu
)) {
2020 valid_mask
|= SCR_TLOR
;
2022 if (cpu_isar_feature(aa64_pauth
, cpu
)) {
2023 valid_mask
|= SCR_API
| SCR_APK
;
2025 if (cpu_isar_feature(aa64_mte
, cpu
)) {
2026 valid_mask
|= SCR_ATA
;
2029 valid_mask
&= ~(SCR_RW
| SCR_ST
);
2032 if (!arm_feature(env
, ARM_FEATURE_EL2
)) {
2033 valid_mask
&= ~SCR_HCE
;
2035 /* On ARMv7, SMD (or SCD as it is called in v7) is only
2036 * supported if EL2 exists. The bit is UNK/SBZP when
2037 * EL2 is unavailable. In QEMU ARMv7, we force it to always zero
2038 * when EL2 is unavailable.
2039 * On ARMv8, this bit is always available.
2041 if (arm_feature(env
, ARM_FEATURE_V7
) &&
2042 !arm_feature(env
, ARM_FEATURE_V8
)) {
2043 valid_mask
&= ~SCR_SMD
;
2047 /* Clear all-context RES0 bits. */
2048 value
&= valid_mask
;
2049 raw_write(env
, ri
, value
);
2052 static CPAccessResult
access_aa64_tid2(CPUARMState
*env
,
2053 const ARMCPRegInfo
*ri
,
2056 if (arm_current_el(env
) == 1 && (arm_hcr_el2_eff(env
) & HCR_TID2
)) {
2057 return CP_ACCESS_TRAP_EL2
;
2060 return CP_ACCESS_OK
;
2063 static uint64_t ccsidr_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
2065 ARMCPU
*cpu
= env_archcpu(env
);
2067 /* Acquire the CSSELR index from the bank corresponding to the CCSIDR
2070 uint32_t index
= A32_BANKED_REG_GET(env
, csselr
,
2071 ri
->secure
& ARM_CP_SECSTATE_S
);
2073 return cpu
->ccsidr
[index
];
2076 static void csselr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2079 raw_write(env
, ri
, value
& 0xf);
2082 static uint64_t isr_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
2084 CPUState
*cs
= env_cpu(env
);
2085 uint64_t hcr_el2
= arm_hcr_el2_eff(env
);
2087 bool allow_virt
= (arm_current_el(env
) == 1 &&
2088 (!arm_is_secure_below_el3(env
) ||
2089 (env
->cp15
.scr_el3
& SCR_EEL2
)));
2091 if (allow_virt
&& (hcr_el2
& HCR_IMO
)) {
2092 if (cs
->interrupt_request
& CPU_INTERRUPT_VIRQ
) {
2096 if (cs
->interrupt_request
& CPU_INTERRUPT_HARD
) {
2101 if (allow_virt
&& (hcr_el2
& HCR_FMO
)) {
2102 if (cs
->interrupt_request
& CPU_INTERRUPT_VFIQ
) {
2106 if (cs
->interrupt_request
& CPU_INTERRUPT_FIQ
) {
2111 /* External aborts are not possible in QEMU so A bit is always clear */
2115 static CPAccessResult
access_aa64_tid1(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2118 if (arm_current_el(env
) == 1 && (arm_hcr_el2_eff(env
) & HCR_TID1
)) {
2119 return CP_ACCESS_TRAP_EL2
;
2122 return CP_ACCESS_OK
;
2125 static CPAccessResult
access_aa32_tid1(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2128 if (arm_feature(env
, ARM_FEATURE_V8
)) {
2129 return access_aa64_tid1(env
, ri
, isread
);
2132 return CP_ACCESS_OK
;
2135 static const ARMCPRegInfo v7_cp_reginfo
[] = {
2136 /* the old v6 WFI, UNPREDICTABLE in v7 but we choose to NOP */
2137 { .name
= "NOP", .cp
= 15, .crn
= 7, .crm
= 0, .opc1
= 0, .opc2
= 4,
2138 .access
= PL1_W
, .type
= ARM_CP_NOP
},
2139 /* Performance monitors are implementation defined in v7,
2140 * but with an ARM recommended set of registers, which we
2143 * Performance registers fall into three categories:
2144 * (a) always UNDEF in PL0, RW in PL1 (PMINTENSET, PMINTENCLR)
2145 * (b) RO in PL0 (ie UNDEF on write), RW in PL1 (PMUSERENR)
2146 * (c) UNDEF in PL0 if PMUSERENR.EN==0, otherwise accessible (all others)
2147 * For the cases controlled by PMUSERENR we must set .access to PL0_RW
2148 * or PL0_RO as appropriate and then check PMUSERENR in the helper fn.
2150 { .name
= "PMCNTENSET", .cp
= 15, .crn
= 9, .crm
= 12, .opc1
= 0, .opc2
= 1,
2151 .access
= PL0_RW
, .type
= ARM_CP_ALIAS
,
2152 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.c9_pmcnten
),
2153 .writefn
= pmcntenset_write
,
2154 .accessfn
= pmreg_access
,
2155 .raw_writefn
= raw_write
},
2156 { .name
= "PMCNTENSET_EL0", .state
= ARM_CP_STATE_AA64
,
2157 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 12, .opc2
= 1,
2158 .access
= PL0_RW
, .accessfn
= pmreg_access
,
2159 .fieldoffset
= offsetof(CPUARMState
, cp15
.c9_pmcnten
), .resetvalue
= 0,
2160 .writefn
= pmcntenset_write
, .raw_writefn
= raw_write
},
2161 { .name
= "PMCNTENCLR", .cp
= 15, .crn
= 9, .crm
= 12, .opc1
= 0, .opc2
= 2,
2163 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.c9_pmcnten
),
2164 .accessfn
= pmreg_access
,
2165 .writefn
= pmcntenclr_write
,
2166 .type
= ARM_CP_ALIAS
},
2167 { .name
= "PMCNTENCLR_EL0", .state
= ARM_CP_STATE_AA64
,
2168 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 12, .opc2
= 2,
2169 .access
= PL0_RW
, .accessfn
= pmreg_access
,
2170 .type
= ARM_CP_ALIAS
,
2171 .fieldoffset
= offsetof(CPUARMState
, cp15
.c9_pmcnten
),
2172 .writefn
= pmcntenclr_write
},
2173 { .name
= "PMOVSR", .cp
= 15, .crn
= 9, .crm
= 12, .opc1
= 0, .opc2
= 3,
2174 .access
= PL0_RW
, .type
= ARM_CP_IO
,
2175 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.c9_pmovsr
),
2176 .accessfn
= pmreg_access
,
2177 .writefn
= pmovsr_write
,
2178 .raw_writefn
= raw_write
},
2179 { .name
= "PMOVSCLR_EL0", .state
= ARM_CP_STATE_AA64
,
2180 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 12, .opc2
= 3,
2181 .access
= PL0_RW
, .accessfn
= pmreg_access
,
2182 .type
= ARM_CP_ALIAS
| ARM_CP_IO
,
2183 .fieldoffset
= offsetof(CPUARMState
, cp15
.c9_pmovsr
),
2184 .writefn
= pmovsr_write
,
2185 .raw_writefn
= raw_write
},
2186 { .name
= "PMSWINC", .cp
= 15, .crn
= 9, .crm
= 12, .opc1
= 0, .opc2
= 4,
2187 .access
= PL0_W
, .accessfn
= pmreg_access_swinc
,
2188 .type
= ARM_CP_NO_RAW
| ARM_CP_IO
,
2189 .writefn
= pmswinc_write
},
2190 { .name
= "PMSWINC_EL0", .state
= ARM_CP_STATE_AA64
,
2191 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 12, .opc2
= 4,
2192 .access
= PL0_W
, .accessfn
= pmreg_access_swinc
,
2193 .type
= ARM_CP_NO_RAW
| ARM_CP_IO
,
2194 .writefn
= pmswinc_write
},
2195 { .name
= "PMSELR", .cp
= 15, .crn
= 9, .crm
= 12, .opc1
= 0, .opc2
= 5,
2196 .access
= PL0_RW
, .type
= ARM_CP_ALIAS
,
2197 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.c9_pmselr
),
2198 .accessfn
= pmreg_access_selr
, .writefn
= pmselr_write
,
2199 .raw_writefn
= raw_write
},
2200 { .name
= "PMSELR_EL0", .state
= ARM_CP_STATE_AA64
,
2201 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 12, .opc2
= 5,
2202 .access
= PL0_RW
, .accessfn
= pmreg_access_selr
,
2203 .fieldoffset
= offsetof(CPUARMState
, cp15
.c9_pmselr
),
2204 .writefn
= pmselr_write
, .raw_writefn
= raw_write
, },
2205 { .name
= "PMCCNTR", .cp
= 15, .crn
= 9, .crm
= 13, .opc1
= 0, .opc2
= 0,
2206 .access
= PL0_RW
, .resetvalue
= 0, .type
= ARM_CP_ALIAS
| ARM_CP_IO
,
2207 .readfn
= pmccntr_read
, .writefn
= pmccntr_write32
,
2208 .accessfn
= pmreg_access_ccntr
},
2209 { .name
= "PMCCNTR_EL0", .state
= ARM_CP_STATE_AA64
,
2210 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 13, .opc2
= 0,
2211 .access
= PL0_RW
, .accessfn
= pmreg_access_ccntr
,
2213 .fieldoffset
= offsetof(CPUARMState
, cp15
.c15_ccnt
),
2214 .readfn
= pmccntr_read
, .writefn
= pmccntr_write
,
2215 .raw_readfn
= raw_read
, .raw_writefn
= raw_write
, },
2216 { .name
= "PMCCFILTR", .cp
= 15, .opc1
= 0, .crn
= 14, .crm
= 15, .opc2
= 7,
2217 .writefn
= pmccfiltr_write_a32
, .readfn
= pmccfiltr_read_a32
,
2218 .access
= PL0_RW
, .accessfn
= pmreg_access
,
2219 .type
= ARM_CP_ALIAS
| ARM_CP_IO
,
2221 { .name
= "PMCCFILTR_EL0", .state
= ARM_CP_STATE_AA64
,
2222 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 15, .opc2
= 7,
2223 .writefn
= pmccfiltr_write
, .raw_writefn
= raw_write
,
2224 .access
= PL0_RW
, .accessfn
= pmreg_access
,
2226 .fieldoffset
= offsetof(CPUARMState
, cp15
.pmccfiltr_el0
),
2228 { .name
= "PMXEVTYPER", .cp
= 15, .crn
= 9, .crm
= 13, .opc1
= 0, .opc2
= 1,
2229 .access
= PL0_RW
, .type
= ARM_CP_NO_RAW
| ARM_CP_IO
,
2230 .accessfn
= pmreg_access
,
2231 .writefn
= pmxevtyper_write
, .readfn
= pmxevtyper_read
},
2232 { .name
= "PMXEVTYPER_EL0", .state
= ARM_CP_STATE_AA64
,
2233 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 13, .opc2
= 1,
2234 .access
= PL0_RW
, .type
= ARM_CP_NO_RAW
| ARM_CP_IO
,
2235 .accessfn
= pmreg_access
,
2236 .writefn
= pmxevtyper_write
, .readfn
= pmxevtyper_read
},
2237 { .name
= "PMXEVCNTR", .cp
= 15, .crn
= 9, .crm
= 13, .opc1
= 0, .opc2
= 2,
2238 .access
= PL0_RW
, .type
= ARM_CP_NO_RAW
| ARM_CP_IO
,
2239 .accessfn
= pmreg_access_xevcntr
,
2240 .writefn
= pmxevcntr_write
, .readfn
= pmxevcntr_read
},
2241 { .name
= "PMXEVCNTR_EL0", .state
= ARM_CP_STATE_AA64
,
2242 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 13, .opc2
= 2,
2243 .access
= PL0_RW
, .type
= ARM_CP_NO_RAW
| ARM_CP_IO
,
2244 .accessfn
= pmreg_access_xevcntr
,
2245 .writefn
= pmxevcntr_write
, .readfn
= pmxevcntr_read
},
2246 { .name
= "PMUSERENR", .cp
= 15, .crn
= 9, .crm
= 14, .opc1
= 0, .opc2
= 0,
2247 .access
= PL0_R
| PL1_RW
, .accessfn
= access_tpm
,
2248 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.c9_pmuserenr
),
2250 .writefn
= pmuserenr_write
, .raw_writefn
= raw_write
},
2251 { .name
= "PMUSERENR_EL0", .state
= ARM_CP_STATE_AA64
,
2252 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 14, .opc2
= 0,
2253 .access
= PL0_R
| PL1_RW
, .accessfn
= access_tpm
, .type
= ARM_CP_ALIAS
,
2254 .fieldoffset
= offsetof(CPUARMState
, cp15
.c9_pmuserenr
),
2256 .writefn
= pmuserenr_write
, .raw_writefn
= raw_write
},
2257 { .name
= "PMINTENSET", .cp
= 15, .crn
= 9, .crm
= 14, .opc1
= 0, .opc2
= 1,
2258 .access
= PL1_RW
, .accessfn
= access_tpm
,
2259 .type
= ARM_CP_ALIAS
| ARM_CP_IO
,
2260 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.c9_pminten
),
2262 .writefn
= pmintenset_write
, .raw_writefn
= raw_write
},
2263 { .name
= "PMINTENSET_EL1", .state
= ARM_CP_STATE_AA64
,
2264 .opc0
= 3, .opc1
= 0, .crn
= 9, .crm
= 14, .opc2
= 1,
2265 .access
= PL1_RW
, .accessfn
= access_tpm
,
2267 .fieldoffset
= offsetof(CPUARMState
, cp15
.c9_pminten
),
2268 .writefn
= pmintenset_write
, .raw_writefn
= raw_write
,
2269 .resetvalue
= 0x0 },
2270 { .name
= "PMINTENCLR", .cp
= 15, .crn
= 9, .crm
= 14, .opc1
= 0, .opc2
= 2,
2271 .access
= PL1_RW
, .accessfn
= access_tpm
,
2272 .type
= ARM_CP_ALIAS
| ARM_CP_IO
,
2273 .fieldoffset
= offsetof(CPUARMState
, cp15
.c9_pminten
),
2274 .writefn
= pmintenclr_write
, },
2275 { .name
= "PMINTENCLR_EL1", .state
= ARM_CP_STATE_AA64
,
2276 .opc0
= 3, .opc1
= 0, .crn
= 9, .crm
= 14, .opc2
= 2,
2277 .access
= PL1_RW
, .accessfn
= access_tpm
,
2278 .type
= ARM_CP_ALIAS
| ARM_CP_IO
,
2279 .fieldoffset
= offsetof(CPUARMState
, cp15
.c9_pminten
),
2280 .writefn
= pmintenclr_write
},
2281 { .name
= "CCSIDR", .state
= ARM_CP_STATE_BOTH
,
2282 .opc0
= 3, .crn
= 0, .crm
= 0, .opc1
= 1, .opc2
= 0,
2284 .accessfn
= access_aa64_tid2
,
2285 .readfn
= ccsidr_read
, .type
= ARM_CP_NO_RAW
},
2286 { .name
= "CSSELR", .state
= ARM_CP_STATE_BOTH
,
2287 .opc0
= 3, .crn
= 0, .crm
= 0, .opc1
= 2, .opc2
= 0,
2289 .accessfn
= access_aa64_tid2
,
2290 .writefn
= csselr_write
, .resetvalue
= 0,
2291 .bank_fieldoffsets
= { offsetof(CPUARMState
, cp15
.csselr_s
),
2292 offsetof(CPUARMState
, cp15
.csselr_ns
) } },
2293 /* Auxiliary ID register: this actually has an IMPDEF value but for now
2294 * just RAZ for all cores:
2296 { .name
= "AIDR", .state
= ARM_CP_STATE_BOTH
,
2297 .opc0
= 3, .opc1
= 1, .crn
= 0, .crm
= 0, .opc2
= 7,
2298 .access
= PL1_R
, .type
= ARM_CP_CONST
,
2299 .accessfn
= access_aa64_tid1
,
2301 /* Auxiliary fault status registers: these also are IMPDEF, and we
2302 * choose to RAZ/WI for all cores.
2304 { .name
= "AFSR0_EL1", .state
= ARM_CP_STATE_BOTH
,
2305 .opc0
= 3, .opc1
= 0, .crn
= 5, .crm
= 1, .opc2
= 0,
2306 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
2307 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
2308 { .name
= "AFSR1_EL1", .state
= ARM_CP_STATE_BOTH
,
2309 .opc0
= 3, .opc1
= 0, .crn
= 5, .crm
= 1, .opc2
= 1,
2310 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
2311 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
2312 /* MAIR can just read-as-written because we don't implement caches
2313 * and so don't need to care about memory attributes.
2315 { .name
= "MAIR_EL1", .state
= ARM_CP_STATE_AA64
,
2316 .opc0
= 3, .opc1
= 0, .crn
= 10, .crm
= 2, .opc2
= 0,
2317 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
2318 .fieldoffset
= offsetof(CPUARMState
, cp15
.mair_el
[1]),
2320 { .name
= "MAIR_EL3", .state
= ARM_CP_STATE_AA64
,
2321 .opc0
= 3, .opc1
= 6, .crn
= 10, .crm
= 2, .opc2
= 0,
2322 .access
= PL3_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.mair_el
[3]),
2324 /* For non-long-descriptor page tables these are PRRR and NMRR;
2325 * regardless they still act as reads-as-written for QEMU.
2327 /* MAIR0/1 are defined separately from their 64-bit counterpart which
2328 * allows them to assign the correct fieldoffset based on the endianness
2329 * handled in the field definitions.
2331 { .name
= "MAIR0", .state
= ARM_CP_STATE_AA32
,
2332 .cp
= 15, .opc1
= 0, .crn
= 10, .crm
= 2, .opc2
= 0,
2333 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
2334 .bank_fieldoffsets
= { offsetof(CPUARMState
, cp15
.mair0_s
),
2335 offsetof(CPUARMState
, cp15
.mair0_ns
) },
2336 .resetfn
= arm_cp_reset_ignore
},
2337 { .name
= "MAIR1", .state
= ARM_CP_STATE_AA32
,
2338 .cp
= 15, .opc1
= 0, .crn
= 10, .crm
= 2, .opc2
= 1,
2339 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
2340 .bank_fieldoffsets
= { offsetof(CPUARMState
, cp15
.mair1_s
),
2341 offsetof(CPUARMState
, cp15
.mair1_ns
) },
2342 .resetfn
= arm_cp_reset_ignore
},
2343 { .name
= "ISR_EL1", .state
= ARM_CP_STATE_BOTH
,
2344 .opc0
= 3, .opc1
= 0, .crn
= 12, .crm
= 1, .opc2
= 0,
2345 .type
= ARM_CP_NO_RAW
, .access
= PL1_R
, .readfn
= isr_read
},
2346 /* 32 bit ITLB invalidates */
2347 { .name
= "ITLBIALL", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 5, .opc2
= 0,
2348 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2349 .writefn
= tlbiall_write
},
2350 { .name
= "ITLBIMVA", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 5, .opc2
= 1,
2351 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2352 .writefn
= tlbimva_write
},
2353 { .name
= "ITLBIASID", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 5, .opc2
= 2,
2354 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2355 .writefn
= tlbiasid_write
},
2356 /* 32 bit DTLB invalidates */
2357 { .name
= "DTLBIALL", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 6, .opc2
= 0,
2358 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2359 .writefn
= tlbiall_write
},
2360 { .name
= "DTLBIMVA", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 6, .opc2
= 1,
2361 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2362 .writefn
= tlbimva_write
},
2363 { .name
= "DTLBIASID", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 6, .opc2
= 2,
2364 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2365 .writefn
= tlbiasid_write
},
2366 /* 32 bit TLB invalidates */
2367 { .name
= "TLBIALL", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 7, .opc2
= 0,
2368 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2369 .writefn
= tlbiall_write
},
2370 { .name
= "TLBIMVA", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 7, .opc2
= 1,
2371 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2372 .writefn
= tlbimva_write
},
2373 { .name
= "TLBIASID", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 7, .opc2
= 2,
2374 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2375 .writefn
= tlbiasid_write
},
2376 { .name
= "TLBIMVAA", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 7, .opc2
= 3,
2377 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2378 .writefn
= tlbimvaa_write
},
2382 static const ARMCPRegInfo v7mp_cp_reginfo
[] = {
2383 /* 32 bit TLB invalidates, Inner Shareable */
2384 { .name
= "TLBIALLIS", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 3, .opc2
= 0,
2385 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2386 .writefn
= tlbiall_is_write
},
2387 { .name
= "TLBIMVAIS", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 3, .opc2
= 1,
2388 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2389 .writefn
= tlbimva_is_write
},
2390 { .name
= "TLBIASIDIS", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 3, .opc2
= 2,
2391 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2392 .writefn
= tlbiasid_is_write
},
2393 { .name
= "TLBIMVAAIS", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 3, .opc2
= 3,
2394 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
2395 .writefn
= tlbimvaa_is_write
},
2399 static const ARMCPRegInfo pmovsset_cp_reginfo
[] = {
2400 /* PMOVSSET is not implemented in v7 before v7ve */
2401 { .name
= "PMOVSSET", .cp
= 15, .opc1
= 0, .crn
= 9, .crm
= 14, .opc2
= 3,
2402 .access
= PL0_RW
, .accessfn
= pmreg_access
,
2403 .type
= ARM_CP_ALIAS
| ARM_CP_IO
,
2404 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.c9_pmovsr
),
2405 .writefn
= pmovsset_write
,
2406 .raw_writefn
= raw_write
},
2407 { .name
= "PMOVSSET_EL0", .state
= ARM_CP_STATE_AA64
,
2408 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 14, .opc2
= 3,
2409 .access
= PL0_RW
, .accessfn
= pmreg_access
,
2410 .type
= ARM_CP_ALIAS
| ARM_CP_IO
,
2411 .fieldoffset
= offsetof(CPUARMState
, cp15
.c9_pmovsr
),
2412 .writefn
= pmovsset_write
,
2413 .raw_writefn
= raw_write
},
2417 static void teecr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2424 static CPAccessResult
teehbr_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2427 if (arm_current_el(env
) == 0 && (env
->teecr
& 1)) {
2428 return CP_ACCESS_TRAP
;
2430 return CP_ACCESS_OK
;
2433 static const ARMCPRegInfo t2ee_cp_reginfo
[] = {
2434 { .name
= "TEECR", .cp
= 14, .crn
= 0, .crm
= 0, .opc1
= 6, .opc2
= 0,
2435 .access
= PL1_RW
, .fieldoffset
= offsetof(CPUARMState
, teecr
),
2437 .writefn
= teecr_write
},
2438 { .name
= "TEEHBR", .cp
= 14, .crn
= 1, .crm
= 0, .opc1
= 6, .opc2
= 0,
2439 .access
= PL0_RW
, .fieldoffset
= offsetof(CPUARMState
, teehbr
),
2440 .accessfn
= teehbr_access
, .resetvalue
= 0 },
2444 static const ARMCPRegInfo v6k_cp_reginfo
[] = {
2445 { .name
= "TPIDR_EL0", .state
= ARM_CP_STATE_AA64
,
2446 .opc0
= 3, .opc1
= 3, .opc2
= 2, .crn
= 13, .crm
= 0,
2448 .fieldoffset
= offsetof(CPUARMState
, cp15
.tpidr_el
[0]), .resetvalue
= 0 },
2449 { .name
= "TPIDRURW", .cp
= 15, .crn
= 13, .crm
= 0, .opc1
= 0, .opc2
= 2,
2451 .bank_fieldoffsets
= { offsetoflow32(CPUARMState
, cp15
.tpidrurw_s
),
2452 offsetoflow32(CPUARMState
, cp15
.tpidrurw_ns
) },
2453 .resetfn
= arm_cp_reset_ignore
},
2454 { .name
= "TPIDRRO_EL0", .state
= ARM_CP_STATE_AA64
,
2455 .opc0
= 3, .opc1
= 3, .opc2
= 3, .crn
= 13, .crm
= 0,
2456 .access
= PL0_R
|PL1_W
,
2457 .fieldoffset
= offsetof(CPUARMState
, cp15
.tpidrro_el
[0]),
2459 { .name
= "TPIDRURO", .cp
= 15, .crn
= 13, .crm
= 0, .opc1
= 0, .opc2
= 3,
2460 .access
= PL0_R
|PL1_W
,
2461 .bank_fieldoffsets
= { offsetoflow32(CPUARMState
, cp15
.tpidruro_s
),
2462 offsetoflow32(CPUARMState
, cp15
.tpidruro_ns
) },
2463 .resetfn
= arm_cp_reset_ignore
},
2464 { .name
= "TPIDR_EL1", .state
= ARM_CP_STATE_AA64
,
2465 .opc0
= 3, .opc1
= 0, .opc2
= 4, .crn
= 13, .crm
= 0,
2467 .fieldoffset
= offsetof(CPUARMState
, cp15
.tpidr_el
[1]), .resetvalue
= 0 },
2468 { .name
= "TPIDRPRW", .opc1
= 0, .cp
= 15, .crn
= 13, .crm
= 0, .opc2
= 4,
2470 .bank_fieldoffsets
= { offsetoflow32(CPUARMState
, cp15
.tpidrprw_s
),
2471 offsetoflow32(CPUARMState
, cp15
.tpidrprw_ns
) },
2476 #ifndef CONFIG_USER_ONLY
2478 static CPAccessResult
gt_cntfrq_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2481 /* CNTFRQ: not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero.
2482 * Writable only at the highest implemented exception level.
2484 int el
= arm_current_el(env
);
2490 hcr
= arm_hcr_el2_eff(env
);
2491 if ((hcr
& (HCR_E2H
| HCR_TGE
)) == (HCR_E2H
| HCR_TGE
)) {
2492 cntkctl
= env
->cp15
.cnthctl_el2
;
2494 cntkctl
= env
->cp15
.c14_cntkctl
;
2496 if (!extract32(cntkctl
, 0, 2)) {
2497 return CP_ACCESS_TRAP
;
2501 if (!isread
&& ri
->state
== ARM_CP_STATE_AA32
&&
2502 arm_is_secure_below_el3(env
)) {
2503 /* Accesses from 32-bit Secure EL1 UNDEF (*not* trap to EL3!) */
2504 return CP_ACCESS_TRAP_UNCATEGORIZED
;
2512 if (!isread
&& el
< arm_highest_el(env
)) {
2513 return CP_ACCESS_TRAP_UNCATEGORIZED
;
2516 return CP_ACCESS_OK
;
2519 static CPAccessResult
gt_counter_access(CPUARMState
*env
, int timeridx
,
2522 unsigned int cur_el
= arm_current_el(env
);
2523 bool secure
= arm_is_secure(env
);
2524 uint64_t hcr
= arm_hcr_el2_eff(env
);
2528 /* If HCR_EL2.<E2H,TGE> == '11': check CNTHCTL_EL2.EL0[PV]CTEN. */
2529 if ((hcr
& (HCR_E2H
| HCR_TGE
)) == (HCR_E2H
| HCR_TGE
)) {
2530 return (extract32(env
->cp15
.cnthctl_el2
, timeridx
, 1)
2531 ? CP_ACCESS_OK
: CP_ACCESS_TRAP_EL2
);
2534 /* CNT[PV]CT: not visible from PL0 if EL0[PV]CTEN is zero */
2535 if (!extract32(env
->cp15
.c14_cntkctl
, timeridx
, 1)) {
2536 return CP_ACCESS_TRAP
;
2539 /* If HCR_EL2.<E2H,TGE> == '10': check CNTHCTL_EL2.EL1PCTEN. */
2540 if (hcr
& HCR_E2H
) {
2541 if (timeridx
== GTIMER_PHYS
&&
2542 !extract32(env
->cp15
.cnthctl_el2
, 10, 1)) {
2543 return CP_ACCESS_TRAP_EL2
;
2546 /* If HCR_EL2.<E2H> == 0: check CNTHCTL_EL2.EL1PCEN. */
2547 if (arm_feature(env
, ARM_FEATURE_EL2
) &&
2548 timeridx
== GTIMER_PHYS
&& !secure
&&
2549 !extract32(env
->cp15
.cnthctl_el2
, 1, 1)) {
2550 return CP_ACCESS_TRAP_EL2
;
2556 /* Check CNTHCTL_EL2.EL1PCTEN, which changes location based on E2H. */
2557 if (arm_feature(env
, ARM_FEATURE_EL2
) &&
2558 timeridx
== GTIMER_PHYS
&& !secure
&&
2560 ? !extract32(env
->cp15
.cnthctl_el2
, 10, 1)
2561 : !extract32(env
->cp15
.cnthctl_el2
, 0, 1))) {
2562 return CP_ACCESS_TRAP_EL2
;
2566 return CP_ACCESS_OK
;
2569 static CPAccessResult
gt_timer_access(CPUARMState
*env
, int timeridx
,
2572 unsigned int cur_el
= arm_current_el(env
);
2573 bool secure
= arm_is_secure(env
);
2574 uint64_t hcr
= arm_hcr_el2_eff(env
);
2578 if ((hcr
& (HCR_E2H
| HCR_TGE
)) == (HCR_E2H
| HCR_TGE
)) {
2579 /* If HCR_EL2.<E2H,TGE> == '11': check CNTHCTL_EL2.EL0[PV]TEN. */
2580 return (extract32(env
->cp15
.cnthctl_el2
, 9 - timeridx
, 1)
2581 ? CP_ACCESS_OK
: CP_ACCESS_TRAP_EL2
);
2585 * CNT[PV]_CVAL, CNT[PV]_CTL, CNT[PV]_TVAL: not visible from
2586 * EL0 if EL0[PV]TEN is zero.
2588 if (!extract32(env
->cp15
.c14_cntkctl
, 9 - timeridx
, 1)) {
2589 return CP_ACCESS_TRAP
;
2594 if (arm_feature(env
, ARM_FEATURE_EL2
) &&
2595 timeridx
== GTIMER_PHYS
&& !secure
) {
2596 if (hcr
& HCR_E2H
) {
2597 /* If HCR_EL2.<E2H,TGE> == '10': check CNTHCTL_EL2.EL1PTEN. */
2598 if (!extract32(env
->cp15
.cnthctl_el2
, 11, 1)) {
2599 return CP_ACCESS_TRAP_EL2
;
2602 /* If HCR_EL2.<E2H> == 0: check CNTHCTL_EL2.EL1PCEN. */
2603 if (!extract32(env
->cp15
.cnthctl_el2
, 1, 1)) {
2604 return CP_ACCESS_TRAP_EL2
;
2610 return CP_ACCESS_OK
;
2613 static CPAccessResult
gt_pct_access(CPUARMState
*env
,
2614 const ARMCPRegInfo
*ri
,
2617 return gt_counter_access(env
, GTIMER_PHYS
, isread
);
2620 static CPAccessResult
gt_vct_access(CPUARMState
*env
,
2621 const ARMCPRegInfo
*ri
,
2624 return gt_counter_access(env
, GTIMER_VIRT
, isread
);
2627 static CPAccessResult
gt_ptimer_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2630 return gt_timer_access(env
, GTIMER_PHYS
, isread
);
2633 static CPAccessResult
gt_vtimer_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2636 return gt_timer_access(env
, GTIMER_VIRT
, isread
);
2639 static CPAccessResult
gt_stimer_access(CPUARMState
*env
,
2640 const ARMCPRegInfo
*ri
,
2643 /* The AArch64 register view of the secure physical timer is
2644 * always accessible from EL3, and configurably accessible from
2647 switch (arm_current_el(env
)) {
2649 if (!arm_is_secure(env
)) {
2650 return CP_ACCESS_TRAP
;
2652 if (!(env
->cp15
.scr_el3
& SCR_ST
)) {
2653 return CP_ACCESS_TRAP_EL3
;
2655 return CP_ACCESS_OK
;
2658 return CP_ACCESS_TRAP
;
2660 return CP_ACCESS_OK
;
2662 g_assert_not_reached();
2666 static uint64_t gt_get_countervalue(CPUARMState
*env
)
2668 ARMCPU
*cpu
= env_archcpu(env
);
2670 return qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL
) / gt_cntfrq_period_ns(cpu
);
2673 static void gt_recalc_timer(ARMCPU
*cpu
, int timeridx
)
2675 ARMGenericTimer
*gt
= &cpu
->env
.cp15
.c14_timer
[timeridx
];
2678 /* Timer enabled: calculate and set current ISTATUS, irq, and
2679 * reset timer to when ISTATUS next has to change
2681 uint64_t offset
= timeridx
== GTIMER_VIRT
?
2682 cpu
->env
.cp15
.cntvoff_el2
: 0;
2683 uint64_t count
= gt_get_countervalue(&cpu
->env
);
2684 /* Note that this must be unsigned 64 bit arithmetic: */
2685 int istatus
= count
- offset
>= gt
->cval
;
2689 gt
->ctl
= deposit32(gt
->ctl
, 2, 1, istatus
);
2691 irqstate
= (istatus
&& !(gt
->ctl
& 2));
2692 qemu_set_irq(cpu
->gt_timer_outputs
[timeridx
], irqstate
);
2695 /* Next transition is when count rolls back over to zero */
2696 nexttick
= UINT64_MAX
;
2698 /* Next transition is when we hit cval */
2699 nexttick
= gt
->cval
+ offset
;
2701 /* Note that the desired next expiry time might be beyond the
2702 * signed-64-bit range of a QEMUTimer -- in this case we just
2703 * set the timer for as far in the future as possible. When the
2704 * timer expires we will reset the timer for any remaining period.
2706 if (nexttick
> INT64_MAX
/ gt_cntfrq_period_ns(cpu
)) {
2707 timer_mod_ns(cpu
->gt_timer
[timeridx
], INT64_MAX
);
2709 timer_mod(cpu
->gt_timer
[timeridx
], nexttick
);
2711 trace_arm_gt_recalc(timeridx
, irqstate
, nexttick
);
2713 /* Timer disabled: ISTATUS and timer output always clear */
2715 qemu_set_irq(cpu
->gt_timer_outputs
[timeridx
], 0);
2716 timer_del(cpu
->gt_timer
[timeridx
]);
2717 trace_arm_gt_recalc_disabled(timeridx
);
2721 static void gt_timer_reset(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2724 ARMCPU
*cpu
= env_archcpu(env
);
2726 timer_del(cpu
->gt_timer
[timeridx
]);
2729 static uint64_t gt_cnt_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
2731 return gt_get_countervalue(env
);
2734 static uint64_t gt_virt_cnt_offset(CPUARMState
*env
)
2738 switch (arm_current_el(env
)) {
2740 hcr
= arm_hcr_el2_eff(env
);
2741 if (hcr
& HCR_E2H
) {
2746 hcr
= arm_hcr_el2_eff(env
);
2747 if ((hcr
& (HCR_E2H
| HCR_TGE
)) == (HCR_E2H
| HCR_TGE
)) {
2753 return env
->cp15
.cntvoff_el2
;
2756 static uint64_t gt_virt_cnt_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
2758 return gt_get_countervalue(env
) - gt_virt_cnt_offset(env
);
2761 static void gt_cval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2765 trace_arm_gt_cval_write(timeridx
, value
);
2766 env
->cp15
.c14_timer
[timeridx
].cval
= value
;
2767 gt_recalc_timer(env_archcpu(env
), timeridx
);
2770 static uint64_t gt_tval_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2773 uint64_t offset
= 0;
2777 case GTIMER_HYPVIRT
:
2778 offset
= gt_virt_cnt_offset(env
);
2782 return (uint32_t)(env
->cp15
.c14_timer
[timeridx
].cval
-
2783 (gt_get_countervalue(env
) - offset
));
2786 static void gt_tval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2790 uint64_t offset
= 0;
2794 case GTIMER_HYPVIRT
:
2795 offset
= gt_virt_cnt_offset(env
);
2799 trace_arm_gt_tval_write(timeridx
, value
);
2800 env
->cp15
.c14_timer
[timeridx
].cval
= gt_get_countervalue(env
) - offset
+
2801 sextract64(value
, 0, 32);
2802 gt_recalc_timer(env_archcpu(env
), timeridx
);
2805 static void gt_ctl_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2809 ARMCPU
*cpu
= env_archcpu(env
);
2810 uint32_t oldval
= env
->cp15
.c14_timer
[timeridx
].ctl
;
2812 trace_arm_gt_ctl_write(timeridx
, value
);
2813 env
->cp15
.c14_timer
[timeridx
].ctl
= deposit64(oldval
, 0, 2, value
);
2814 if ((oldval
^ value
) & 1) {
2815 /* Enable toggled */
2816 gt_recalc_timer(cpu
, timeridx
);
2817 } else if ((oldval
^ value
) & 2) {
2818 /* IMASK toggled: don't need to recalculate,
2819 * just set the interrupt line based on ISTATUS
2821 int irqstate
= (oldval
& 4) && !(value
& 2);
2823 trace_arm_gt_imask_toggle(timeridx
, irqstate
);
2824 qemu_set_irq(cpu
->gt_timer_outputs
[timeridx
], irqstate
);
2828 static void gt_phys_timer_reset(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
2830 gt_timer_reset(env
, ri
, GTIMER_PHYS
);
2833 static void gt_phys_cval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2836 gt_cval_write(env
, ri
, GTIMER_PHYS
, value
);
2839 static uint64_t gt_phys_tval_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
2841 return gt_tval_read(env
, ri
, GTIMER_PHYS
);
2844 static void gt_phys_tval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2847 gt_tval_write(env
, ri
, GTIMER_PHYS
, value
);
2850 static void gt_phys_ctl_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2853 gt_ctl_write(env
, ri
, GTIMER_PHYS
, value
);
2856 static int gt_phys_redir_timeridx(CPUARMState
*env
)
2858 switch (arm_mmu_idx(env
)) {
2859 case ARMMMUIdx_E20_0
:
2860 case ARMMMUIdx_E20_2
:
2861 case ARMMMUIdx_E20_2_PAN
:
2868 static int gt_virt_redir_timeridx(CPUARMState
*env
)
2870 switch (arm_mmu_idx(env
)) {
2871 case ARMMMUIdx_E20_0
:
2872 case ARMMMUIdx_E20_2
:
2873 case ARMMMUIdx_E20_2_PAN
:
2874 return GTIMER_HYPVIRT
;
2880 static uint64_t gt_phys_redir_cval_read(CPUARMState
*env
,
2881 const ARMCPRegInfo
*ri
)
2883 int timeridx
= gt_phys_redir_timeridx(env
);
2884 return env
->cp15
.c14_timer
[timeridx
].cval
;
2887 static void gt_phys_redir_cval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2890 int timeridx
= gt_phys_redir_timeridx(env
);
2891 gt_cval_write(env
, ri
, timeridx
, value
);
2894 static uint64_t gt_phys_redir_tval_read(CPUARMState
*env
,
2895 const ARMCPRegInfo
*ri
)
2897 int timeridx
= gt_phys_redir_timeridx(env
);
2898 return gt_tval_read(env
, ri
, timeridx
);
2901 static void gt_phys_redir_tval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2904 int timeridx
= gt_phys_redir_timeridx(env
);
2905 gt_tval_write(env
, ri
, timeridx
, value
);
2908 static uint64_t gt_phys_redir_ctl_read(CPUARMState
*env
,
2909 const ARMCPRegInfo
*ri
)
2911 int timeridx
= gt_phys_redir_timeridx(env
);
2912 return env
->cp15
.c14_timer
[timeridx
].ctl
;
2915 static void gt_phys_redir_ctl_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2918 int timeridx
= gt_phys_redir_timeridx(env
);
2919 gt_ctl_write(env
, ri
, timeridx
, value
);
2922 static void gt_virt_timer_reset(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
2924 gt_timer_reset(env
, ri
, GTIMER_VIRT
);
2927 static void gt_virt_cval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2930 gt_cval_write(env
, ri
, GTIMER_VIRT
, value
);
2933 static uint64_t gt_virt_tval_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
2935 return gt_tval_read(env
, ri
, GTIMER_VIRT
);
2938 static void gt_virt_tval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2941 gt_tval_write(env
, ri
, GTIMER_VIRT
, value
);
2944 static void gt_virt_ctl_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2947 gt_ctl_write(env
, ri
, GTIMER_VIRT
, value
);
2950 static void gt_cntvoff_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2953 ARMCPU
*cpu
= env_archcpu(env
);
2955 trace_arm_gt_cntvoff_write(value
);
2956 raw_write(env
, ri
, value
);
2957 gt_recalc_timer(cpu
, GTIMER_VIRT
);
2960 static uint64_t gt_virt_redir_cval_read(CPUARMState
*env
,
2961 const ARMCPRegInfo
*ri
)
2963 int timeridx
= gt_virt_redir_timeridx(env
);
2964 return env
->cp15
.c14_timer
[timeridx
].cval
;
2967 static void gt_virt_redir_cval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2970 int timeridx
= gt_virt_redir_timeridx(env
);
2971 gt_cval_write(env
, ri
, timeridx
, value
);
2974 static uint64_t gt_virt_redir_tval_read(CPUARMState
*env
,
2975 const ARMCPRegInfo
*ri
)
2977 int timeridx
= gt_virt_redir_timeridx(env
);
2978 return gt_tval_read(env
, ri
, timeridx
);
2981 static void gt_virt_redir_tval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2984 int timeridx
= gt_virt_redir_timeridx(env
);
2985 gt_tval_write(env
, ri
, timeridx
, value
);
2988 static uint64_t gt_virt_redir_ctl_read(CPUARMState
*env
,
2989 const ARMCPRegInfo
*ri
)
2991 int timeridx
= gt_virt_redir_timeridx(env
);
2992 return env
->cp15
.c14_timer
[timeridx
].ctl
;
2995 static void gt_virt_redir_ctl_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
2998 int timeridx
= gt_virt_redir_timeridx(env
);
2999 gt_ctl_write(env
, ri
, timeridx
, value
);
3002 static void gt_hyp_timer_reset(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
3004 gt_timer_reset(env
, ri
, GTIMER_HYP
);
3007 static void gt_hyp_cval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3010 gt_cval_write(env
, ri
, GTIMER_HYP
, value
);
3013 static uint64_t gt_hyp_tval_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
3015 return gt_tval_read(env
, ri
, GTIMER_HYP
);
3018 static void gt_hyp_tval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3021 gt_tval_write(env
, ri
, GTIMER_HYP
, value
);
3024 static void gt_hyp_ctl_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3027 gt_ctl_write(env
, ri
, GTIMER_HYP
, value
);
3030 static void gt_sec_timer_reset(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
3032 gt_timer_reset(env
, ri
, GTIMER_SEC
);
3035 static void gt_sec_cval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3038 gt_cval_write(env
, ri
, GTIMER_SEC
, value
);
3041 static uint64_t gt_sec_tval_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
3043 return gt_tval_read(env
, ri
, GTIMER_SEC
);
3046 static void gt_sec_tval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3049 gt_tval_write(env
, ri
, GTIMER_SEC
, value
);
3052 static void gt_sec_ctl_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3055 gt_ctl_write(env
, ri
, GTIMER_SEC
, value
);
3058 static void gt_hv_timer_reset(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
3060 gt_timer_reset(env
, ri
, GTIMER_HYPVIRT
);
3063 static void gt_hv_cval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3066 gt_cval_write(env
, ri
, GTIMER_HYPVIRT
, value
);
3069 static uint64_t gt_hv_tval_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
3071 return gt_tval_read(env
, ri
, GTIMER_HYPVIRT
);
3074 static void gt_hv_tval_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3077 gt_tval_write(env
, ri
, GTIMER_HYPVIRT
, value
);
3080 static void gt_hv_ctl_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3083 gt_ctl_write(env
, ri
, GTIMER_HYPVIRT
, value
);
3086 void arm_gt_ptimer_cb(void *opaque
)
3088 ARMCPU
*cpu
= opaque
;
3090 gt_recalc_timer(cpu
, GTIMER_PHYS
);
3093 void arm_gt_vtimer_cb(void *opaque
)
3095 ARMCPU
*cpu
= opaque
;
3097 gt_recalc_timer(cpu
, GTIMER_VIRT
);
3100 void arm_gt_htimer_cb(void *opaque
)
3102 ARMCPU
*cpu
= opaque
;
3104 gt_recalc_timer(cpu
, GTIMER_HYP
);
3107 void arm_gt_stimer_cb(void *opaque
)
3109 ARMCPU
*cpu
= opaque
;
3111 gt_recalc_timer(cpu
, GTIMER_SEC
);
3114 void arm_gt_hvtimer_cb(void *opaque
)
3116 ARMCPU
*cpu
= opaque
;
3118 gt_recalc_timer(cpu
, GTIMER_HYPVIRT
);
3121 static void arm_gt_cntfrq_reset(CPUARMState
*env
, const ARMCPRegInfo
*opaque
)
3123 ARMCPU
*cpu
= env_archcpu(env
);
3125 cpu
->env
.cp15
.c14_cntfrq
= cpu
->gt_cntfrq_hz
;
3128 static const ARMCPRegInfo generic_timer_cp_reginfo
[] = {
3129 /* Note that CNTFRQ is purely reads-as-written for the benefit
3130 * of software; writing it doesn't actually change the timer frequency.
3131 * Our reset value matches the fixed frequency we implement the timer at.
3133 { .name
= "CNTFRQ", .cp
= 15, .crn
= 14, .crm
= 0, .opc1
= 0, .opc2
= 0,
3134 .type
= ARM_CP_ALIAS
,
3135 .access
= PL1_RW
| PL0_R
, .accessfn
= gt_cntfrq_access
,
3136 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.c14_cntfrq
),
3138 { .name
= "CNTFRQ_EL0", .state
= ARM_CP_STATE_AA64
,
3139 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 0, .opc2
= 0,
3140 .access
= PL1_RW
| PL0_R
, .accessfn
= gt_cntfrq_access
,
3141 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_cntfrq
),
3142 .resetfn
= arm_gt_cntfrq_reset
,
3144 /* overall control: mostly access permissions */
3145 { .name
= "CNTKCTL", .state
= ARM_CP_STATE_BOTH
,
3146 .opc0
= 3, .opc1
= 0, .crn
= 14, .crm
= 1, .opc2
= 0,
3148 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_cntkctl
),
3151 /* per-timer control */
3152 { .name
= "CNTP_CTL", .cp
= 15, .crn
= 14, .crm
= 2, .opc1
= 0, .opc2
= 1,
3153 .secure
= ARM_CP_SECSTATE_NS
,
3154 .type
= ARM_CP_IO
| ARM_CP_ALIAS
, .access
= PL0_RW
,
3155 .accessfn
= gt_ptimer_access
,
3156 .fieldoffset
= offsetoflow32(CPUARMState
,
3157 cp15
.c14_timer
[GTIMER_PHYS
].ctl
),
3158 .readfn
= gt_phys_redir_ctl_read
, .raw_readfn
= raw_read
,
3159 .writefn
= gt_phys_redir_ctl_write
, .raw_writefn
= raw_write
,
3161 { .name
= "CNTP_CTL_S",
3162 .cp
= 15, .crn
= 14, .crm
= 2, .opc1
= 0, .opc2
= 1,
3163 .secure
= ARM_CP_SECSTATE_S
,
3164 .type
= ARM_CP_IO
| ARM_CP_ALIAS
, .access
= PL0_RW
,
3165 .accessfn
= gt_ptimer_access
,
3166 .fieldoffset
= offsetoflow32(CPUARMState
,
3167 cp15
.c14_timer
[GTIMER_SEC
].ctl
),
3168 .writefn
= gt_sec_ctl_write
, .raw_writefn
= raw_write
,
3170 { .name
= "CNTP_CTL_EL0", .state
= ARM_CP_STATE_AA64
,
3171 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 2, .opc2
= 1,
3172 .type
= ARM_CP_IO
, .access
= PL0_RW
,
3173 .accessfn
= gt_ptimer_access
,
3174 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_PHYS
].ctl
),
3176 .readfn
= gt_phys_redir_ctl_read
, .raw_readfn
= raw_read
,
3177 .writefn
= gt_phys_redir_ctl_write
, .raw_writefn
= raw_write
,
3179 { .name
= "CNTV_CTL", .cp
= 15, .crn
= 14, .crm
= 3, .opc1
= 0, .opc2
= 1,
3180 .type
= ARM_CP_IO
| ARM_CP_ALIAS
, .access
= PL0_RW
,
3181 .accessfn
= gt_vtimer_access
,
3182 .fieldoffset
= offsetoflow32(CPUARMState
,
3183 cp15
.c14_timer
[GTIMER_VIRT
].ctl
),
3184 .readfn
= gt_virt_redir_ctl_read
, .raw_readfn
= raw_read
,
3185 .writefn
= gt_virt_redir_ctl_write
, .raw_writefn
= raw_write
,
3187 { .name
= "CNTV_CTL_EL0", .state
= ARM_CP_STATE_AA64
,
3188 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 3, .opc2
= 1,
3189 .type
= ARM_CP_IO
, .access
= PL0_RW
,
3190 .accessfn
= gt_vtimer_access
,
3191 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_VIRT
].ctl
),
3193 .readfn
= gt_virt_redir_ctl_read
, .raw_readfn
= raw_read
,
3194 .writefn
= gt_virt_redir_ctl_write
, .raw_writefn
= raw_write
,
3196 /* TimerValue views: a 32 bit downcounting view of the underlying state */
3197 { .name
= "CNTP_TVAL", .cp
= 15, .crn
= 14, .crm
= 2, .opc1
= 0, .opc2
= 0,
3198 .secure
= ARM_CP_SECSTATE_NS
,
3199 .type
= ARM_CP_NO_RAW
| ARM_CP_IO
, .access
= PL0_RW
,
3200 .accessfn
= gt_ptimer_access
,
3201 .readfn
= gt_phys_redir_tval_read
, .writefn
= gt_phys_redir_tval_write
,
3203 { .name
= "CNTP_TVAL_S",
3204 .cp
= 15, .crn
= 14, .crm
= 2, .opc1
= 0, .opc2
= 0,
3205 .secure
= ARM_CP_SECSTATE_S
,
3206 .type
= ARM_CP_NO_RAW
| ARM_CP_IO
, .access
= PL0_RW
,
3207 .accessfn
= gt_ptimer_access
,
3208 .readfn
= gt_sec_tval_read
, .writefn
= gt_sec_tval_write
,
3210 { .name
= "CNTP_TVAL_EL0", .state
= ARM_CP_STATE_AA64
,
3211 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 2, .opc2
= 0,
3212 .type
= ARM_CP_NO_RAW
| ARM_CP_IO
, .access
= PL0_RW
,
3213 .accessfn
= gt_ptimer_access
, .resetfn
= gt_phys_timer_reset
,
3214 .readfn
= gt_phys_redir_tval_read
, .writefn
= gt_phys_redir_tval_write
,
3216 { .name
= "CNTV_TVAL", .cp
= 15, .crn
= 14, .crm
= 3, .opc1
= 0, .opc2
= 0,
3217 .type
= ARM_CP_NO_RAW
| ARM_CP_IO
, .access
= PL0_RW
,
3218 .accessfn
= gt_vtimer_access
,
3219 .readfn
= gt_virt_redir_tval_read
, .writefn
= gt_virt_redir_tval_write
,
3221 { .name
= "CNTV_TVAL_EL0", .state
= ARM_CP_STATE_AA64
,
3222 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 3, .opc2
= 0,
3223 .type
= ARM_CP_NO_RAW
| ARM_CP_IO
, .access
= PL0_RW
,
3224 .accessfn
= gt_vtimer_access
, .resetfn
= gt_virt_timer_reset
,
3225 .readfn
= gt_virt_redir_tval_read
, .writefn
= gt_virt_redir_tval_write
,
3227 /* The counter itself */
3228 { .name
= "CNTPCT", .cp
= 15, .crm
= 14, .opc1
= 0,
3229 .access
= PL0_R
, .type
= ARM_CP_64BIT
| ARM_CP_NO_RAW
| ARM_CP_IO
,
3230 .accessfn
= gt_pct_access
,
3231 .readfn
= gt_cnt_read
, .resetfn
= arm_cp_reset_ignore
,
3233 { .name
= "CNTPCT_EL0", .state
= ARM_CP_STATE_AA64
,
3234 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 0, .opc2
= 1,
3235 .access
= PL0_R
, .type
= ARM_CP_NO_RAW
| ARM_CP_IO
,
3236 .accessfn
= gt_pct_access
, .readfn
= gt_cnt_read
,
3238 { .name
= "CNTVCT", .cp
= 15, .crm
= 14, .opc1
= 1,
3239 .access
= PL0_R
, .type
= ARM_CP_64BIT
| ARM_CP_NO_RAW
| ARM_CP_IO
,
3240 .accessfn
= gt_vct_access
,
3241 .readfn
= gt_virt_cnt_read
, .resetfn
= arm_cp_reset_ignore
,
3243 { .name
= "CNTVCT_EL0", .state
= ARM_CP_STATE_AA64
,
3244 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 0, .opc2
= 2,
3245 .access
= PL0_R
, .type
= ARM_CP_NO_RAW
| ARM_CP_IO
,
3246 .accessfn
= gt_vct_access
, .readfn
= gt_virt_cnt_read
,
3248 /* Comparison value, indicating when the timer goes off */
3249 { .name
= "CNTP_CVAL", .cp
= 15, .crm
= 14, .opc1
= 2,
3250 .secure
= ARM_CP_SECSTATE_NS
,
3252 .type
= ARM_CP_64BIT
| ARM_CP_IO
| ARM_CP_ALIAS
,
3253 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_PHYS
].cval
),
3254 .accessfn
= gt_ptimer_access
,
3255 .readfn
= gt_phys_redir_cval_read
, .raw_readfn
= raw_read
,
3256 .writefn
= gt_phys_redir_cval_write
, .raw_writefn
= raw_write
,
3258 { .name
= "CNTP_CVAL_S", .cp
= 15, .crm
= 14, .opc1
= 2,
3259 .secure
= ARM_CP_SECSTATE_S
,
3261 .type
= ARM_CP_64BIT
| ARM_CP_IO
| ARM_CP_ALIAS
,
3262 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_SEC
].cval
),
3263 .accessfn
= gt_ptimer_access
,
3264 .writefn
= gt_sec_cval_write
, .raw_writefn
= raw_write
,
3266 { .name
= "CNTP_CVAL_EL0", .state
= ARM_CP_STATE_AA64
,
3267 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 2, .opc2
= 2,
3270 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_PHYS
].cval
),
3271 .resetvalue
= 0, .accessfn
= gt_ptimer_access
,
3272 .readfn
= gt_phys_redir_cval_read
, .raw_readfn
= raw_read
,
3273 .writefn
= gt_phys_redir_cval_write
, .raw_writefn
= raw_write
,
3275 { .name
= "CNTV_CVAL", .cp
= 15, .crm
= 14, .opc1
= 3,
3277 .type
= ARM_CP_64BIT
| ARM_CP_IO
| ARM_CP_ALIAS
,
3278 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_VIRT
].cval
),
3279 .accessfn
= gt_vtimer_access
,
3280 .readfn
= gt_virt_redir_cval_read
, .raw_readfn
= raw_read
,
3281 .writefn
= gt_virt_redir_cval_write
, .raw_writefn
= raw_write
,
3283 { .name
= "CNTV_CVAL_EL0", .state
= ARM_CP_STATE_AA64
,
3284 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 3, .opc2
= 2,
3287 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_VIRT
].cval
),
3288 .resetvalue
= 0, .accessfn
= gt_vtimer_access
,
3289 .readfn
= gt_virt_redir_cval_read
, .raw_readfn
= raw_read
,
3290 .writefn
= gt_virt_redir_cval_write
, .raw_writefn
= raw_write
,
3292 /* Secure timer -- this is actually restricted to only EL3
3293 * and configurably Secure-EL1 via the accessfn.
3295 { .name
= "CNTPS_TVAL_EL1", .state
= ARM_CP_STATE_AA64
,
3296 .opc0
= 3, .opc1
= 7, .crn
= 14, .crm
= 2, .opc2
= 0,
3297 .type
= ARM_CP_NO_RAW
| ARM_CP_IO
, .access
= PL1_RW
,
3298 .accessfn
= gt_stimer_access
,
3299 .readfn
= gt_sec_tval_read
,
3300 .writefn
= gt_sec_tval_write
,
3301 .resetfn
= gt_sec_timer_reset
,
3303 { .name
= "CNTPS_CTL_EL1", .state
= ARM_CP_STATE_AA64
,
3304 .opc0
= 3, .opc1
= 7, .crn
= 14, .crm
= 2, .opc2
= 1,
3305 .type
= ARM_CP_IO
, .access
= PL1_RW
,
3306 .accessfn
= gt_stimer_access
,
3307 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_SEC
].ctl
),
3309 .writefn
= gt_sec_ctl_write
, .raw_writefn
= raw_write
,
3311 { .name
= "CNTPS_CVAL_EL1", .state
= ARM_CP_STATE_AA64
,
3312 .opc0
= 3, .opc1
= 7, .crn
= 14, .crm
= 2, .opc2
= 2,
3313 .type
= ARM_CP_IO
, .access
= PL1_RW
,
3314 .accessfn
= gt_stimer_access
,
3315 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_SEC
].cval
),
3316 .writefn
= gt_sec_cval_write
, .raw_writefn
= raw_write
,
3321 static CPAccessResult
e2h_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3324 if (!(arm_hcr_el2_eff(env
) & HCR_E2H
)) {
3325 return CP_ACCESS_TRAP
;
3327 return CP_ACCESS_OK
;
3332 /* In user-mode most of the generic timer registers are inaccessible
3333 * however modern kernels (4.12+) allow access to cntvct_el0
3336 static uint64_t gt_virt_cnt_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
3338 ARMCPU
*cpu
= env_archcpu(env
);
3340 /* Currently we have no support for QEMUTimer in linux-user so we
3341 * can't call gt_get_countervalue(env), instead we directly
3342 * call the lower level functions.
3344 return cpu_get_clock() / gt_cntfrq_period_ns(cpu
);
3347 static const ARMCPRegInfo generic_timer_cp_reginfo
[] = {
3348 { .name
= "CNTFRQ_EL0", .state
= ARM_CP_STATE_AA64
,
3349 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 0, .opc2
= 0,
3350 .type
= ARM_CP_CONST
, .access
= PL0_R
/* no PL1_RW in linux-user */,
3351 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_cntfrq
),
3352 .resetvalue
= NANOSECONDS_PER_SECOND
/ GTIMER_SCALE
,
3354 { .name
= "CNTVCT_EL0", .state
= ARM_CP_STATE_AA64
,
3355 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 0, .opc2
= 2,
3356 .access
= PL0_R
, .type
= ARM_CP_NO_RAW
| ARM_CP_IO
,
3357 .readfn
= gt_virt_cnt_read
,
3364 static void par_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
, uint64_t value
)
3366 if (arm_feature(env
, ARM_FEATURE_LPAE
)) {
3367 raw_write(env
, ri
, value
);
3368 } else if (arm_feature(env
, ARM_FEATURE_V7
)) {
3369 raw_write(env
, ri
, value
& 0xfffff6ff);
3371 raw_write(env
, ri
, value
& 0xfffff1ff);
3375 #ifndef CONFIG_USER_ONLY
3376 /* get_phys_addr() isn't present for user-mode-only targets */
3378 static CPAccessResult
ats_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3382 /* The ATS12NSO* operations must trap to EL3 if executed in
3383 * Secure EL1 (which can only happen if EL3 is AArch64).
3384 * They are simply UNDEF if executed from NS EL1.
3385 * They function normally from EL2 or EL3.
3387 if (arm_current_el(env
) == 1) {
3388 if (arm_is_secure_below_el3(env
)) {
3389 return CP_ACCESS_TRAP_UNCATEGORIZED_EL3
;
3391 return CP_ACCESS_TRAP_UNCATEGORIZED
;
3394 return CP_ACCESS_OK
;
3398 static uint64_t do_ats_write(CPUARMState
*env
, uint64_t value
,
3399 MMUAccessType access_type
, ARMMMUIdx mmu_idx
)
3402 target_ulong page_size
;
3406 bool format64
= false;
3407 MemTxAttrs attrs
= {};
3408 ARMMMUFaultInfo fi
= {};
3409 ARMCacheAttrs cacheattrs
= {};
3411 ret
= get_phys_addr(env
, value
, access_type
, mmu_idx
, &phys_addr
, &attrs
,
3412 &prot
, &page_size
, &fi
, &cacheattrs
);
3416 * Some kinds of translation fault must cause exceptions rather
3417 * than being reported in the PAR.
3419 int current_el
= arm_current_el(env
);
3421 uint32_t syn
, fsr
, fsc
;
3422 bool take_exc
= false;
3424 if (fi
.s1ptw
&& current_el
== 1 && !arm_is_secure(env
)
3425 && arm_mmu_idx_is_stage1_of_2(mmu_idx
)) {
3427 * Synchronous stage 2 fault on an access made as part of the
3428 * translation table walk for AT S1E0* or AT S1E1* insn
3429 * executed from NS EL1. If this is a synchronous external abort
3430 * and SCR_EL3.EA == 1, then we take a synchronous external abort
3431 * to EL3. Otherwise the fault is taken as an exception to EL2,
3432 * and HPFAR_EL2 holds the faulting IPA.
3434 if (fi
.type
== ARMFault_SyncExternalOnWalk
&&
3435 (env
->cp15
.scr_el3
& SCR_EA
)) {
3438 env
->cp15
.hpfar_el2
= extract64(fi
.s2addr
, 12, 47) << 4;
3442 } else if (fi
.type
== ARMFault_SyncExternalOnWalk
) {
3444 * Synchronous external aborts during a translation table walk
3445 * are taken as Data Abort exceptions.
3448 if (current_el
== 3) {
3454 target_el
= exception_target_el(env
);
3460 /* Construct FSR and FSC using same logic as arm_deliver_fault() */
3461 if (target_el
== 2 || arm_el_is_aa64(env
, target_el
) ||
3462 arm_s1_regime_using_lpae_format(env
, mmu_idx
)) {
3463 fsr
= arm_fi_to_lfsc(&fi
);
3464 fsc
= extract32(fsr
, 0, 6);
3466 fsr
= arm_fi_to_sfsc(&fi
);
3470 * Report exception with ESR indicating a fault due to a
3471 * translation table walk for a cache maintenance instruction.
3473 syn
= syn_data_abort_no_iss(current_el
== target_el
, 0,
3474 fi
.ea
, 1, fi
.s1ptw
, 1, fsc
);
3475 env
->exception
.vaddress
= value
;
3476 env
->exception
.fsr
= fsr
;
3477 raise_exception(env
, EXCP_DATA_ABORT
, syn
, target_el
);
3483 } else if (arm_feature(env
, ARM_FEATURE_LPAE
)) {
3486 * * TTBCR.EAE determines whether the result is returned using the
3487 * 32-bit or the 64-bit PAR format
3488 * * Instructions executed in Hyp mode always use the 64bit format
3490 * ATS1S2NSOxx uses the 64bit format if any of the following is true:
3491 * * The Non-secure TTBCR.EAE bit is set to 1
3492 * * The implementation includes EL2, and the value of HCR.VM is 1
3494 * (Note that HCR.DC makes HCR.VM behave as if it is 1.)
3496 * ATS1Hx always uses the 64bit format.
3498 format64
= arm_s1_regime_using_lpae_format(env
, mmu_idx
);
3500 if (arm_feature(env
, ARM_FEATURE_EL2
)) {
3501 if (mmu_idx
== ARMMMUIdx_E10_0
||
3502 mmu_idx
== ARMMMUIdx_E10_1
||
3503 mmu_idx
== ARMMMUIdx_E10_1_PAN
) {
3504 format64
|= env
->cp15
.hcr_el2
& (HCR_VM
| HCR_DC
);
3506 format64
|= arm_current_el(env
) == 2;
3512 /* Create a 64-bit PAR */
3513 par64
= (1 << 11); /* LPAE bit always set */
3515 par64
|= phys_addr
& ~0xfffULL
;
3516 if (!attrs
.secure
) {
3517 par64
|= (1 << 9); /* NS */
3519 par64
|= (uint64_t)cacheattrs
.attrs
<< 56; /* ATTR */
3520 par64
|= cacheattrs
.shareability
<< 7; /* SH */
3522 uint32_t fsr
= arm_fi_to_lfsc(&fi
);
3525 par64
|= (fsr
& 0x3f) << 1; /* FS */
3527 par64
|= (1 << 9); /* S */
3530 par64
|= (1 << 8); /* PTW */
3534 /* fsr is a DFSR/IFSR value for the short descriptor
3535 * translation table format (with WnR always clear).
3536 * Convert it to a 32-bit PAR.
3539 /* We do not set any attribute bits in the PAR */
3540 if (page_size
== (1 << 24)
3541 && arm_feature(env
, ARM_FEATURE_V7
)) {
3542 par64
= (phys_addr
& 0xff000000) | (1 << 1);
3544 par64
= phys_addr
& 0xfffff000;
3546 if (!attrs
.secure
) {
3547 par64
|= (1 << 9); /* NS */
3550 uint32_t fsr
= arm_fi_to_sfsc(&fi
);
3552 par64
= ((fsr
& (1 << 10)) >> 5) | ((fsr
& (1 << 12)) >> 6) |
3553 ((fsr
& 0xf) << 1) | 1;
3558 #endif /* CONFIG_TCG */
3560 static void ats_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
, uint64_t value
)
3563 MMUAccessType access_type
= ri
->opc2
& 1 ? MMU_DATA_STORE
: MMU_DATA_LOAD
;
3566 int el
= arm_current_el(env
);
3567 bool secure
= arm_is_secure_below_el3(env
);
3569 switch (ri
->opc2
& 6) {
3571 /* stage 1 current state PL1: ATS1CPR, ATS1CPW, ATS1CPRP, ATS1CPWP */
3574 mmu_idx
= ARMMMUIdx_SE3
;
3577 g_assert(!secure
); /* TODO: ARMv8.4-SecEL2 */
3580 if (ri
->crm
== 9 && (env
->uncached_cpsr
& CPSR_PAN
)) {
3581 mmu_idx
= (secure
? ARMMMUIdx_SE10_1_PAN
3582 : ARMMMUIdx_Stage1_E1_PAN
);
3584 mmu_idx
= secure
? ARMMMUIdx_SE10_1
: ARMMMUIdx_Stage1_E1
;
3588 g_assert_not_reached();
3592 /* stage 1 current state PL0: ATS1CUR, ATS1CUW */
3595 mmu_idx
= ARMMMUIdx_SE10_0
;
3598 mmu_idx
= ARMMMUIdx_Stage1_E0
;
3601 mmu_idx
= secure
? ARMMMUIdx_SE10_0
: ARMMMUIdx_Stage1_E0
;
3604 g_assert_not_reached();
3608 /* stage 1+2 NonSecure PL1: ATS12NSOPR, ATS12NSOPW */
3609 mmu_idx
= ARMMMUIdx_E10_1
;
3612 /* stage 1+2 NonSecure PL0: ATS12NSOUR, ATS12NSOUW */
3613 mmu_idx
= ARMMMUIdx_E10_0
;
3616 g_assert_not_reached();
3619 par64
= do_ats_write(env
, value
, access_type
, mmu_idx
);
3621 A32_BANKED_CURRENT_REG_SET(env
, par
, par64
);
3623 /* Handled by hardware accelerator. */
3624 g_assert_not_reached();
3625 #endif /* CONFIG_TCG */
3628 static void ats1h_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3632 MMUAccessType access_type
= ri
->opc2
& 1 ? MMU_DATA_STORE
: MMU_DATA_LOAD
;
3635 par64
= do_ats_write(env
, value
, access_type
, ARMMMUIdx_E2
);
3637 A32_BANKED_CURRENT_REG_SET(env
, par
, par64
);
3639 /* Handled by hardware accelerator. */
3640 g_assert_not_reached();
3641 #endif /* CONFIG_TCG */
3644 static CPAccessResult
at_s1e2_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3647 if (arm_current_el(env
) == 3 && !(env
->cp15
.scr_el3
& SCR_NS
)) {
3648 return CP_ACCESS_TRAP
;
3650 return CP_ACCESS_OK
;
3653 static void ats_write64(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3657 MMUAccessType access_type
= ri
->opc2
& 1 ? MMU_DATA_STORE
: MMU_DATA_LOAD
;
3659 int secure
= arm_is_secure_below_el3(env
);
3661 switch (ri
->opc2
& 6) {
3664 case 0: /* AT S1E1R, AT S1E1W, AT S1E1RP, AT S1E1WP */
3665 if (ri
->crm
== 9 && (env
->pstate
& PSTATE_PAN
)) {
3666 mmu_idx
= (secure
? ARMMMUIdx_SE10_1_PAN
3667 : ARMMMUIdx_Stage1_E1_PAN
);
3669 mmu_idx
= secure
? ARMMMUIdx_SE10_1
: ARMMMUIdx_Stage1_E1
;
3672 case 4: /* AT S1E2R, AT S1E2W */
3673 mmu_idx
= ARMMMUIdx_E2
;
3675 case 6: /* AT S1E3R, AT S1E3W */
3676 mmu_idx
= ARMMMUIdx_SE3
;
3679 g_assert_not_reached();
3682 case 2: /* AT S1E0R, AT S1E0W */
3683 mmu_idx
= secure
? ARMMMUIdx_SE10_0
: ARMMMUIdx_Stage1_E0
;
3685 case 4: /* AT S12E1R, AT S12E1W */
3686 mmu_idx
= secure
? ARMMMUIdx_SE10_1
: ARMMMUIdx_E10_1
;
3688 case 6: /* AT S12E0R, AT S12E0W */
3689 mmu_idx
= secure
? ARMMMUIdx_SE10_0
: ARMMMUIdx_E10_0
;
3692 g_assert_not_reached();
3695 env
->cp15
.par_el
[1] = do_ats_write(env
, value
, access_type
, mmu_idx
);
3697 /* Handled by hardware accelerator. */
3698 g_assert_not_reached();
3699 #endif /* CONFIG_TCG */
3703 static const ARMCPRegInfo vapa_cp_reginfo
[] = {
3704 { .name
= "PAR", .cp
= 15, .crn
= 7, .crm
= 4, .opc1
= 0, .opc2
= 0,
3705 .access
= PL1_RW
, .resetvalue
= 0,
3706 .bank_fieldoffsets
= { offsetoflow32(CPUARMState
, cp15
.par_s
),
3707 offsetoflow32(CPUARMState
, cp15
.par_ns
) },
3708 .writefn
= par_write
},
3709 #ifndef CONFIG_USER_ONLY
3710 /* This underdecoding is safe because the reginfo is NO_RAW. */
3711 { .name
= "ATS", .cp
= 15, .crn
= 7, .crm
= 8, .opc1
= 0, .opc2
= CP_ANY
,
3712 .access
= PL1_W
, .accessfn
= ats_access
,
3713 .writefn
= ats_write
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
},
3718 /* Return basic MPU access permission bits. */
3719 static uint32_t simple_mpu_ap_bits(uint32_t val
)
3726 for (i
= 0; i
< 16; i
+= 2) {
3727 ret
|= (val
>> i
) & mask
;
3733 /* Pad basic MPU access permission bits to extended format. */
3734 static uint32_t extended_mpu_ap_bits(uint32_t val
)
3741 for (i
= 0; i
< 16; i
+= 2) {
3742 ret
|= (val
& mask
) << i
;
3748 static void pmsav5_data_ap_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3751 env
->cp15
.pmsav5_data_ap
= extended_mpu_ap_bits(value
);
3754 static uint64_t pmsav5_data_ap_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
3756 return simple_mpu_ap_bits(env
->cp15
.pmsav5_data_ap
);
3759 static void pmsav5_insn_ap_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3762 env
->cp15
.pmsav5_insn_ap
= extended_mpu_ap_bits(value
);
3765 static uint64_t pmsav5_insn_ap_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
3767 return simple_mpu_ap_bits(env
->cp15
.pmsav5_insn_ap
);
3770 static uint64_t pmsav7_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
3772 uint32_t *u32p
= *(uint32_t **)raw_ptr(env
, ri
);
3778 u32p
+= env
->pmsav7
.rnr
[M_REG_NS
];
3782 static void pmsav7_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3785 ARMCPU
*cpu
= env_archcpu(env
);
3786 uint32_t *u32p
= *(uint32_t **)raw_ptr(env
, ri
);
3792 u32p
+= env
->pmsav7
.rnr
[M_REG_NS
];
3793 tlb_flush(CPU(cpu
)); /* Mappings may have changed - purge! */
3797 static void pmsav7_rgnr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3800 ARMCPU
*cpu
= env_archcpu(env
);
3801 uint32_t nrgs
= cpu
->pmsav7_dregion
;
3803 if (value
>= nrgs
) {
3804 qemu_log_mask(LOG_GUEST_ERROR
,
3805 "PMSAv7 RGNR write >= # supported regions, %" PRIu32
3806 " > %" PRIu32
"\n", (uint32_t)value
, nrgs
);
3810 raw_write(env
, ri
, value
);
3813 static const ARMCPRegInfo pmsav7_cp_reginfo
[] = {
3814 /* Reset for all these registers is handled in arm_cpu_reset(),
3815 * because the PMSAv7 is also used by M-profile CPUs, which do
3816 * not register cpregs but still need the state to be reset.
3818 { .name
= "DRBAR", .cp
= 15, .crn
= 6, .opc1
= 0, .crm
= 1, .opc2
= 0,
3819 .access
= PL1_RW
, .type
= ARM_CP_NO_RAW
,
3820 .fieldoffset
= offsetof(CPUARMState
, pmsav7
.drbar
),
3821 .readfn
= pmsav7_read
, .writefn
= pmsav7_write
,
3822 .resetfn
= arm_cp_reset_ignore
},
3823 { .name
= "DRSR", .cp
= 15, .crn
= 6, .opc1
= 0, .crm
= 1, .opc2
= 2,
3824 .access
= PL1_RW
, .type
= ARM_CP_NO_RAW
,
3825 .fieldoffset
= offsetof(CPUARMState
, pmsav7
.drsr
),
3826 .readfn
= pmsav7_read
, .writefn
= pmsav7_write
,
3827 .resetfn
= arm_cp_reset_ignore
},
3828 { .name
= "DRACR", .cp
= 15, .crn
= 6, .opc1
= 0, .crm
= 1, .opc2
= 4,
3829 .access
= PL1_RW
, .type
= ARM_CP_NO_RAW
,
3830 .fieldoffset
= offsetof(CPUARMState
, pmsav7
.dracr
),
3831 .readfn
= pmsav7_read
, .writefn
= pmsav7_write
,
3832 .resetfn
= arm_cp_reset_ignore
},
3833 { .name
= "RGNR", .cp
= 15, .crn
= 6, .opc1
= 0, .crm
= 2, .opc2
= 0,
3835 .fieldoffset
= offsetof(CPUARMState
, pmsav7
.rnr
[M_REG_NS
]),
3836 .writefn
= pmsav7_rgnr_write
,
3837 .resetfn
= arm_cp_reset_ignore
},
3841 static const ARMCPRegInfo pmsav5_cp_reginfo
[] = {
3842 { .name
= "DATA_AP", .cp
= 15, .crn
= 5, .crm
= 0, .opc1
= 0, .opc2
= 0,
3843 .access
= PL1_RW
, .type
= ARM_CP_ALIAS
,
3844 .fieldoffset
= offsetof(CPUARMState
, cp15
.pmsav5_data_ap
),
3845 .readfn
= pmsav5_data_ap_read
, .writefn
= pmsav5_data_ap_write
, },
3846 { .name
= "INSN_AP", .cp
= 15, .crn
= 5, .crm
= 0, .opc1
= 0, .opc2
= 1,
3847 .access
= PL1_RW
, .type
= ARM_CP_ALIAS
,
3848 .fieldoffset
= offsetof(CPUARMState
, cp15
.pmsav5_insn_ap
),
3849 .readfn
= pmsav5_insn_ap_read
, .writefn
= pmsav5_insn_ap_write
, },
3850 { .name
= "DATA_EXT_AP", .cp
= 15, .crn
= 5, .crm
= 0, .opc1
= 0, .opc2
= 2,
3852 .fieldoffset
= offsetof(CPUARMState
, cp15
.pmsav5_data_ap
),
3854 { .name
= "INSN_EXT_AP", .cp
= 15, .crn
= 5, .crm
= 0, .opc1
= 0, .opc2
= 3,
3856 .fieldoffset
= offsetof(CPUARMState
, cp15
.pmsav5_insn_ap
),
3858 { .name
= "DCACHE_CFG", .cp
= 15, .crn
= 2, .crm
= 0, .opc1
= 0, .opc2
= 0,
3860 .fieldoffset
= offsetof(CPUARMState
, cp15
.c2_data
), .resetvalue
= 0, },
3861 { .name
= "ICACHE_CFG", .cp
= 15, .crn
= 2, .crm
= 0, .opc1
= 0, .opc2
= 1,
3863 .fieldoffset
= offsetof(CPUARMState
, cp15
.c2_insn
), .resetvalue
= 0, },
3864 /* Protection region base and size registers */
3865 { .name
= "946_PRBS0", .cp
= 15, .crn
= 6, .crm
= 0, .opc1
= 0,
3866 .opc2
= CP_ANY
, .access
= PL1_RW
, .resetvalue
= 0,
3867 .fieldoffset
= offsetof(CPUARMState
, cp15
.c6_region
[0]) },
3868 { .name
= "946_PRBS1", .cp
= 15, .crn
= 6, .crm
= 1, .opc1
= 0,
3869 .opc2
= CP_ANY
, .access
= PL1_RW
, .resetvalue
= 0,
3870 .fieldoffset
= offsetof(CPUARMState
, cp15
.c6_region
[1]) },
3871 { .name
= "946_PRBS2", .cp
= 15, .crn
= 6, .crm
= 2, .opc1
= 0,
3872 .opc2
= CP_ANY
, .access
= PL1_RW
, .resetvalue
= 0,
3873 .fieldoffset
= offsetof(CPUARMState
, cp15
.c6_region
[2]) },
3874 { .name
= "946_PRBS3", .cp
= 15, .crn
= 6, .crm
= 3, .opc1
= 0,
3875 .opc2
= CP_ANY
, .access
= PL1_RW
, .resetvalue
= 0,
3876 .fieldoffset
= offsetof(CPUARMState
, cp15
.c6_region
[3]) },
3877 { .name
= "946_PRBS4", .cp
= 15, .crn
= 6, .crm
= 4, .opc1
= 0,
3878 .opc2
= CP_ANY
, .access
= PL1_RW
, .resetvalue
= 0,
3879 .fieldoffset
= offsetof(CPUARMState
, cp15
.c6_region
[4]) },
3880 { .name
= "946_PRBS5", .cp
= 15, .crn
= 6, .crm
= 5, .opc1
= 0,
3881 .opc2
= CP_ANY
, .access
= PL1_RW
, .resetvalue
= 0,
3882 .fieldoffset
= offsetof(CPUARMState
, cp15
.c6_region
[5]) },
3883 { .name
= "946_PRBS6", .cp
= 15, .crn
= 6, .crm
= 6, .opc1
= 0,
3884 .opc2
= CP_ANY
, .access
= PL1_RW
, .resetvalue
= 0,
3885 .fieldoffset
= offsetof(CPUARMState
, cp15
.c6_region
[6]) },
3886 { .name
= "946_PRBS7", .cp
= 15, .crn
= 6, .crm
= 7, .opc1
= 0,
3887 .opc2
= CP_ANY
, .access
= PL1_RW
, .resetvalue
= 0,
3888 .fieldoffset
= offsetof(CPUARMState
, cp15
.c6_region
[7]) },
3892 static void vmsa_ttbcr_raw_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3895 TCR
*tcr
= raw_ptr(env
, ri
);
3896 int maskshift
= extract32(value
, 0, 3);
3898 if (!arm_feature(env
, ARM_FEATURE_V8
)) {
3899 if (arm_feature(env
, ARM_FEATURE_LPAE
) && (value
& TTBCR_EAE
)) {
3900 /* Pre ARMv8 bits [21:19], [15:14] and [6:3] are UNK/SBZP when
3901 * using Long-desciptor translation table format */
3902 value
&= ~((7 << 19) | (3 << 14) | (0xf << 3));
3903 } else if (arm_feature(env
, ARM_FEATURE_EL3
)) {
3904 /* In an implementation that includes the Security Extensions
3905 * TTBCR has additional fields PD0 [4] and PD1 [5] for
3906 * Short-descriptor translation table format.
3908 value
&= TTBCR_PD1
| TTBCR_PD0
| TTBCR_N
;
3914 /* Update the masks corresponding to the TCR bank being written
3915 * Note that we always calculate mask and base_mask, but
3916 * they are only used for short-descriptor tables (ie if EAE is 0);
3917 * for long-descriptor tables the TCR fields are used differently
3918 * and the mask and base_mask values are meaningless.
3920 tcr
->raw_tcr
= value
;
3921 tcr
->mask
= ~(((uint32_t)0xffffffffu
) >> maskshift
);
3922 tcr
->base_mask
= ~((uint32_t)0x3fffu
>> maskshift
);
3925 static void vmsa_ttbcr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3928 ARMCPU
*cpu
= env_archcpu(env
);
3929 TCR
*tcr
= raw_ptr(env
, ri
);
3931 if (arm_feature(env
, ARM_FEATURE_LPAE
)) {
3932 /* With LPAE the TTBCR could result in a change of ASID
3933 * via the TTBCR.A1 bit, so do a TLB flush.
3935 tlb_flush(CPU(cpu
));
3937 /* Preserve the high half of TCR_EL1, set via TTBCR2. */
3938 value
= deposit64(tcr
->raw_tcr
, 0, 32, value
);
3939 vmsa_ttbcr_raw_write(env
, ri
, value
);
3942 static void vmsa_ttbcr_reset(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
3944 TCR
*tcr
= raw_ptr(env
, ri
);
3946 /* Reset both the TCR as well as the masks corresponding to the bank of
3947 * the TCR being reset.
3951 tcr
->base_mask
= 0xffffc000u
;
3954 static void vmsa_tcr_el12_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3957 ARMCPU
*cpu
= env_archcpu(env
);
3958 TCR
*tcr
= raw_ptr(env
, ri
);
3960 /* For AArch64 the A1 bit could result in a change of ASID, so TLB flush. */
3961 tlb_flush(CPU(cpu
));
3962 tcr
->raw_tcr
= value
;
3965 static void vmsa_ttbr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3968 /* If the ASID changes (with a 64-bit write), we must flush the TLB. */
3969 if (cpreg_field_is_64bit(ri
) &&
3970 extract64(raw_read(env
, ri
) ^ value
, 48, 16) != 0) {
3971 ARMCPU
*cpu
= env_archcpu(env
);
3972 tlb_flush(CPU(cpu
));
3974 raw_write(env
, ri
, value
);
3977 static void vmsa_tcr_ttbr_el2_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3981 * If we are running with E2&0 regime, then an ASID is active.
3982 * Flush if that might be changing. Note we're not checking
3983 * TCR_EL2.A1 to know if this is really the TTBRx_EL2 that
3984 * holds the active ASID, only checking the field that might.
3986 if (extract64(raw_read(env
, ri
) ^ value
, 48, 16) &&
3987 (arm_hcr_el2_eff(env
) & HCR_E2H
)) {
3988 tlb_flush_by_mmuidx(env_cpu(env
),
3989 ARMMMUIdxBit_E20_2
|
3990 ARMMMUIdxBit_E20_2_PAN
|
3991 ARMMMUIdxBit_E20_0
);
3993 raw_write(env
, ri
, value
);
3996 static void vttbr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
3999 ARMCPU
*cpu
= env_archcpu(env
);
4000 CPUState
*cs
= CPU(cpu
);
4003 * A change in VMID to the stage2 page table (Stage2) invalidates
4004 * the combined stage 1&2 tlbs (EL10_1 and EL10_0).
4006 if (raw_read(env
, ri
) != value
) {
4007 tlb_flush_by_mmuidx(cs
,
4008 ARMMMUIdxBit_E10_1
|
4009 ARMMMUIdxBit_E10_1_PAN
|
4010 ARMMMUIdxBit_E10_0
);
4011 raw_write(env
, ri
, value
);
4015 static const ARMCPRegInfo vmsa_pmsa_cp_reginfo
[] = {
4016 { .name
= "DFSR", .cp
= 15, .crn
= 5, .crm
= 0, .opc1
= 0, .opc2
= 0,
4017 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
, .type
= ARM_CP_ALIAS
,
4018 .bank_fieldoffsets
= { offsetoflow32(CPUARMState
, cp15
.dfsr_s
),
4019 offsetoflow32(CPUARMState
, cp15
.dfsr_ns
) }, },
4020 { .name
= "IFSR", .cp
= 15, .crn
= 5, .crm
= 0, .opc1
= 0, .opc2
= 1,
4021 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
, .resetvalue
= 0,
4022 .bank_fieldoffsets
= { offsetoflow32(CPUARMState
, cp15
.ifsr_s
),
4023 offsetoflow32(CPUARMState
, cp15
.ifsr_ns
) } },
4024 { .name
= "DFAR", .cp
= 15, .opc1
= 0, .crn
= 6, .crm
= 0, .opc2
= 0,
4025 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
, .resetvalue
= 0,
4026 .bank_fieldoffsets
= { offsetof(CPUARMState
, cp15
.dfar_s
),
4027 offsetof(CPUARMState
, cp15
.dfar_ns
) } },
4028 { .name
= "FAR_EL1", .state
= ARM_CP_STATE_AA64
,
4029 .opc0
= 3, .crn
= 6, .crm
= 0, .opc1
= 0, .opc2
= 0,
4030 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
4031 .fieldoffset
= offsetof(CPUARMState
, cp15
.far_el
[1]),
4036 static const ARMCPRegInfo vmsa_cp_reginfo
[] = {
4037 { .name
= "ESR_EL1", .state
= ARM_CP_STATE_AA64
,
4038 .opc0
= 3, .crn
= 5, .crm
= 2, .opc1
= 0, .opc2
= 0,
4039 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
4040 .fieldoffset
= offsetof(CPUARMState
, cp15
.esr_el
[1]), .resetvalue
= 0, },
4041 { .name
= "TTBR0_EL1", .state
= ARM_CP_STATE_BOTH
,
4042 .opc0
= 3, .opc1
= 0, .crn
= 2, .crm
= 0, .opc2
= 0,
4043 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
4044 .writefn
= vmsa_ttbr_write
, .resetvalue
= 0,
4045 .bank_fieldoffsets
= { offsetof(CPUARMState
, cp15
.ttbr0_s
),
4046 offsetof(CPUARMState
, cp15
.ttbr0_ns
) } },
4047 { .name
= "TTBR1_EL1", .state
= ARM_CP_STATE_BOTH
,
4048 .opc0
= 3, .opc1
= 0, .crn
= 2, .crm
= 0, .opc2
= 1,
4049 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
4050 .writefn
= vmsa_ttbr_write
, .resetvalue
= 0,
4051 .bank_fieldoffsets
= { offsetof(CPUARMState
, cp15
.ttbr1_s
),
4052 offsetof(CPUARMState
, cp15
.ttbr1_ns
) } },
4053 { .name
= "TCR_EL1", .state
= ARM_CP_STATE_AA64
,
4054 .opc0
= 3, .crn
= 2, .crm
= 0, .opc1
= 0, .opc2
= 2,
4055 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
4056 .writefn
= vmsa_tcr_el12_write
,
4057 .resetfn
= vmsa_ttbcr_reset
, .raw_writefn
= raw_write
,
4058 .fieldoffset
= offsetof(CPUARMState
, cp15
.tcr_el
[1]) },
4059 { .name
= "TTBCR", .cp
= 15, .crn
= 2, .crm
= 0, .opc1
= 0, .opc2
= 2,
4060 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
4061 .type
= ARM_CP_ALIAS
, .writefn
= vmsa_ttbcr_write
,
4062 .raw_writefn
= vmsa_ttbcr_raw_write
,
4063 .bank_fieldoffsets
= { offsetoflow32(CPUARMState
, cp15
.tcr_el
[3]),
4064 offsetoflow32(CPUARMState
, cp15
.tcr_el
[1])} },
4068 /* Note that unlike TTBCR, writing to TTBCR2 does not require flushing
4069 * qemu tlbs nor adjusting cached masks.
4071 static const ARMCPRegInfo ttbcr2_reginfo
= {
4072 .name
= "TTBCR2", .cp
= 15, .opc1
= 0, .crn
= 2, .crm
= 0, .opc2
= 3,
4073 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
4074 .type
= ARM_CP_ALIAS
,
4075 .bank_fieldoffsets
= { offsetofhigh32(CPUARMState
, cp15
.tcr_el
[3]),
4076 offsetofhigh32(CPUARMState
, cp15
.tcr_el
[1]) },
4079 static void omap_ticonfig_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4082 env
->cp15
.c15_ticonfig
= value
& 0xe7;
4083 /* The OS_TYPE bit in this register changes the reported CPUID! */
4084 env
->cp15
.c0_cpuid
= (value
& (1 << 5)) ?
4085 ARM_CPUID_TI915T
: ARM_CPUID_TI925T
;
4088 static void omap_threadid_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4091 env
->cp15
.c15_threadid
= value
& 0xffff;
4094 static void omap_wfi_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4097 /* Wait-for-interrupt (deprecated) */
4098 cpu_interrupt(env_cpu(env
), CPU_INTERRUPT_HALT
);
4101 static void omap_cachemaint_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4104 /* On OMAP there are registers indicating the max/min index of dcache lines
4105 * containing a dirty line; cache flush operations have to reset these.
4107 env
->cp15
.c15_i_max
= 0x000;
4108 env
->cp15
.c15_i_min
= 0xff0;
4111 static const ARMCPRegInfo omap_cp_reginfo
[] = {
4112 { .name
= "DFSR", .cp
= 15, .crn
= 5, .crm
= CP_ANY
,
4113 .opc1
= CP_ANY
, .opc2
= CP_ANY
, .access
= PL1_RW
, .type
= ARM_CP_OVERRIDE
,
4114 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.esr_el
[1]),
4116 { .name
= "", .cp
= 15, .crn
= 15, .crm
= 0, .opc1
= 0, .opc2
= 0,
4117 .access
= PL1_RW
, .type
= ARM_CP_NOP
},
4118 { .name
= "TICONFIG", .cp
= 15, .crn
= 15, .crm
= 1, .opc1
= 0, .opc2
= 0,
4120 .fieldoffset
= offsetof(CPUARMState
, cp15
.c15_ticonfig
), .resetvalue
= 0,
4121 .writefn
= omap_ticonfig_write
},
4122 { .name
= "IMAX", .cp
= 15, .crn
= 15, .crm
= 2, .opc1
= 0, .opc2
= 0,
4124 .fieldoffset
= offsetof(CPUARMState
, cp15
.c15_i_max
), .resetvalue
= 0, },
4125 { .name
= "IMIN", .cp
= 15, .crn
= 15, .crm
= 3, .opc1
= 0, .opc2
= 0,
4126 .access
= PL1_RW
, .resetvalue
= 0xff0,
4127 .fieldoffset
= offsetof(CPUARMState
, cp15
.c15_i_min
) },
4128 { .name
= "THREADID", .cp
= 15, .crn
= 15, .crm
= 4, .opc1
= 0, .opc2
= 0,
4130 .fieldoffset
= offsetof(CPUARMState
, cp15
.c15_threadid
), .resetvalue
= 0,
4131 .writefn
= omap_threadid_write
},
4132 { .name
= "TI925T_STATUS", .cp
= 15, .crn
= 15,
4133 .crm
= 8, .opc1
= 0, .opc2
= 0, .access
= PL1_RW
,
4134 .type
= ARM_CP_NO_RAW
,
4135 .readfn
= arm_cp_read_zero
, .writefn
= omap_wfi_write
, },
4136 /* TODO: Peripheral port remap register:
4137 * On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt controller
4138 * base address at $rn & ~0xfff and map size of 0x200 << ($rn & 0xfff),
4141 { .name
= "OMAP_CACHEMAINT", .cp
= 15, .crn
= 7, .crm
= CP_ANY
,
4142 .opc1
= 0, .opc2
= CP_ANY
, .access
= PL1_W
,
4143 .type
= ARM_CP_OVERRIDE
| ARM_CP_NO_RAW
,
4144 .writefn
= omap_cachemaint_write
},
4145 { .name
= "C9", .cp
= 15, .crn
= 9,
4146 .crm
= CP_ANY
, .opc1
= CP_ANY
, .opc2
= CP_ANY
, .access
= PL1_RW
,
4147 .type
= ARM_CP_CONST
| ARM_CP_OVERRIDE
, .resetvalue
= 0 },
4151 static void xscale_cpar_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4154 env
->cp15
.c15_cpar
= value
& 0x3fff;
4157 static const ARMCPRegInfo xscale_cp_reginfo
[] = {
4158 { .name
= "XSCALE_CPAR",
4159 .cp
= 15, .crn
= 15, .crm
= 1, .opc1
= 0, .opc2
= 0, .access
= PL1_RW
,
4160 .fieldoffset
= offsetof(CPUARMState
, cp15
.c15_cpar
), .resetvalue
= 0,
4161 .writefn
= xscale_cpar_write
, },
4162 { .name
= "XSCALE_AUXCR",
4163 .cp
= 15, .crn
= 1, .crm
= 0, .opc1
= 0, .opc2
= 1, .access
= PL1_RW
,
4164 .fieldoffset
= offsetof(CPUARMState
, cp15
.c1_xscaleauxcr
),
4166 /* XScale specific cache-lockdown: since we have no cache we NOP these
4167 * and hope the guest does not really rely on cache behaviour.
4169 { .name
= "XSCALE_LOCK_ICACHE_LINE",
4170 .cp
= 15, .opc1
= 0, .crn
= 9, .crm
= 1, .opc2
= 0,
4171 .access
= PL1_W
, .type
= ARM_CP_NOP
},
4172 { .name
= "XSCALE_UNLOCK_ICACHE",
4173 .cp
= 15, .opc1
= 0, .crn
= 9, .crm
= 1, .opc2
= 1,
4174 .access
= PL1_W
, .type
= ARM_CP_NOP
},
4175 { .name
= "XSCALE_DCACHE_LOCK",
4176 .cp
= 15, .opc1
= 0, .crn
= 9, .crm
= 2, .opc2
= 0,
4177 .access
= PL1_RW
, .type
= ARM_CP_NOP
},
4178 { .name
= "XSCALE_UNLOCK_DCACHE",
4179 .cp
= 15, .opc1
= 0, .crn
= 9, .crm
= 2, .opc2
= 1,
4180 .access
= PL1_W
, .type
= ARM_CP_NOP
},
4184 static const ARMCPRegInfo dummy_c15_cp_reginfo
[] = {
4185 /* RAZ/WI the whole crn=15 space, when we don't have a more specific
4186 * implementation of this implementation-defined space.
4187 * Ideally this should eventually disappear in favour of actually
4188 * implementing the correct behaviour for all cores.
4190 { .name
= "C15_IMPDEF", .cp
= 15, .crn
= 15,
4191 .crm
= CP_ANY
, .opc1
= CP_ANY
, .opc2
= CP_ANY
,
4193 .type
= ARM_CP_CONST
| ARM_CP_NO_RAW
| ARM_CP_OVERRIDE
,
4198 static const ARMCPRegInfo cache_dirty_status_cp_reginfo
[] = {
4199 /* Cache status: RAZ because we have no cache so it's always clean */
4200 { .name
= "CDSR", .cp
= 15, .crn
= 7, .crm
= 10, .opc1
= 0, .opc2
= 6,
4201 .access
= PL1_R
, .type
= ARM_CP_CONST
| ARM_CP_NO_RAW
,
4206 static const ARMCPRegInfo cache_block_ops_cp_reginfo
[] = {
4207 /* We never have a a block transfer operation in progress */
4208 { .name
= "BXSR", .cp
= 15, .crn
= 7, .crm
= 12, .opc1
= 0, .opc2
= 4,
4209 .access
= PL0_R
, .type
= ARM_CP_CONST
| ARM_CP_NO_RAW
,
4211 /* The cache ops themselves: these all NOP for QEMU */
4212 { .name
= "IICR", .cp
= 15, .crm
= 5, .opc1
= 0,
4213 .access
= PL1_W
, .type
= ARM_CP_NOP
|ARM_CP_64BIT
},
4214 { .name
= "IDCR", .cp
= 15, .crm
= 6, .opc1
= 0,
4215 .access
= PL1_W
, .type
= ARM_CP_NOP
|ARM_CP_64BIT
},
4216 { .name
= "CDCR", .cp
= 15, .crm
= 12, .opc1
= 0,
4217 .access
= PL0_W
, .type
= ARM_CP_NOP
|ARM_CP_64BIT
},
4218 { .name
= "PIR", .cp
= 15, .crm
= 12, .opc1
= 1,
4219 .access
= PL0_W
, .type
= ARM_CP_NOP
|ARM_CP_64BIT
},
4220 { .name
= "PDR", .cp
= 15, .crm
= 12, .opc1
= 2,
4221 .access
= PL0_W
, .type
= ARM_CP_NOP
|ARM_CP_64BIT
},
4222 { .name
= "CIDCR", .cp
= 15, .crm
= 14, .opc1
= 0,
4223 .access
= PL1_W
, .type
= ARM_CP_NOP
|ARM_CP_64BIT
},
4227 static const ARMCPRegInfo cache_test_clean_cp_reginfo
[] = {
4228 /* The cache test-and-clean instructions always return (1 << 30)
4229 * to indicate that there are no dirty cache lines.
4231 { .name
= "TC_DCACHE", .cp
= 15, .crn
= 7, .crm
= 10, .opc1
= 0, .opc2
= 3,
4232 .access
= PL0_R
, .type
= ARM_CP_CONST
| ARM_CP_NO_RAW
,
4233 .resetvalue
= (1 << 30) },
4234 { .name
= "TCI_DCACHE", .cp
= 15, .crn
= 7, .crm
= 14, .opc1
= 0, .opc2
= 3,
4235 .access
= PL0_R
, .type
= ARM_CP_CONST
| ARM_CP_NO_RAW
,
4236 .resetvalue
= (1 << 30) },
4240 static const ARMCPRegInfo strongarm_cp_reginfo
[] = {
4241 /* Ignore ReadBuffer accesses */
4242 { .name
= "C9_READBUFFER", .cp
= 15, .crn
= 9,
4243 .crm
= CP_ANY
, .opc1
= CP_ANY
, .opc2
= CP_ANY
,
4244 .access
= PL1_RW
, .resetvalue
= 0,
4245 .type
= ARM_CP_CONST
| ARM_CP_OVERRIDE
| ARM_CP_NO_RAW
},
4249 static uint64_t midr_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
4251 ARMCPU
*cpu
= env_archcpu(env
);
4252 unsigned int cur_el
= arm_current_el(env
);
4253 bool secure
= arm_is_secure(env
);
4255 if (arm_feature(&cpu
->env
, ARM_FEATURE_EL2
) && !secure
&& cur_el
== 1) {
4256 return env
->cp15
.vpidr_el2
;
4258 return raw_read(env
, ri
);
4261 static uint64_t mpidr_read_val(CPUARMState
*env
)
4263 ARMCPU
*cpu
= env_archcpu(env
);
4264 uint64_t mpidr
= cpu
->mp_affinity
;
4266 if (arm_feature(env
, ARM_FEATURE_V7MP
)) {
4267 mpidr
|= (1U << 31);
4268 /* Cores which are uniprocessor (non-coherent)
4269 * but still implement the MP extensions set
4270 * bit 30. (For instance, Cortex-R5).
4272 if (cpu
->mp_is_up
) {
4273 mpidr
|= (1u << 30);
4279 static uint64_t mpidr_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
4281 unsigned int cur_el
= arm_current_el(env
);
4282 bool secure
= arm_is_secure(env
);
4284 if (arm_feature(env
, ARM_FEATURE_EL2
) && !secure
&& cur_el
== 1) {
4285 return env
->cp15
.vmpidr_el2
;
4287 return mpidr_read_val(env
);
4290 static const ARMCPRegInfo lpae_cp_reginfo
[] = {
4292 { .name
= "AMAIR0", .state
= ARM_CP_STATE_BOTH
,
4293 .opc0
= 3, .crn
= 10, .crm
= 3, .opc1
= 0, .opc2
= 0,
4294 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
4295 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
4296 /* AMAIR1 is mapped to AMAIR_EL1[63:32] */
4297 { .name
= "AMAIR1", .cp
= 15, .crn
= 10, .crm
= 3, .opc1
= 0, .opc2
= 1,
4298 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
4299 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
4300 { .name
= "PAR", .cp
= 15, .crm
= 7, .opc1
= 0,
4301 .access
= PL1_RW
, .type
= ARM_CP_64BIT
, .resetvalue
= 0,
4302 .bank_fieldoffsets
= { offsetof(CPUARMState
, cp15
.par_s
),
4303 offsetof(CPUARMState
, cp15
.par_ns
)} },
4304 { .name
= "TTBR0", .cp
= 15, .crm
= 2, .opc1
= 0,
4305 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
4306 .type
= ARM_CP_64BIT
| ARM_CP_ALIAS
,
4307 .bank_fieldoffsets
= { offsetof(CPUARMState
, cp15
.ttbr0_s
),
4308 offsetof(CPUARMState
, cp15
.ttbr0_ns
) },
4309 .writefn
= vmsa_ttbr_write
, },
4310 { .name
= "TTBR1", .cp
= 15, .crm
= 2, .opc1
= 1,
4311 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
4312 .type
= ARM_CP_64BIT
| ARM_CP_ALIAS
,
4313 .bank_fieldoffsets
= { offsetof(CPUARMState
, cp15
.ttbr1_s
),
4314 offsetof(CPUARMState
, cp15
.ttbr1_ns
) },
4315 .writefn
= vmsa_ttbr_write
, },
4319 static uint64_t aa64_fpcr_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
4321 return vfp_get_fpcr(env
);
4324 static void aa64_fpcr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4327 vfp_set_fpcr(env
, value
);
4330 static uint64_t aa64_fpsr_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
4332 return vfp_get_fpsr(env
);
4335 static void aa64_fpsr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4338 vfp_set_fpsr(env
, value
);
4341 static CPAccessResult
aa64_daif_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4344 if (arm_current_el(env
) == 0 && !(arm_sctlr(env
, 0) & SCTLR_UMA
)) {
4345 return CP_ACCESS_TRAP
;
4347 return CP_ACCESS_OK
;
4350 static void aa64_daif_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4353 env
->daif
= value
& PSTATE_DAIF
;
4356 static uint64_t aa64_pan_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
4358 return env
->pstate
& PSTATE_PAN
;
4361 static void aa64_pan_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4364 env
->pstate
= (env
->pstate
& ~PSTATE_PAN
) | (value
& PSTATE_PAN
);
4367 static const ARMCPRegInfo pan_reginfo
= {
4368 .name
= "PAN", .state
= ARM_CP_STATE_AA64
,
4369 .opc0
= 3, .opc1
= 0, .crn
= 4, .crm
= 2, .opc2
= 3,
4370 .type
= ARM_CP_NO_RAW
, .access
= PL1_RW
,
4371 .readfn
= aa64_pan_read
, .writefn
= aa64_pan_write
4374 static uint64_t aa64_uao_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
4376 return env
->pstate
& PSTATE_UAO
;
4379 static void aa64_uao_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4382 env
->pstate
= (env
->pstate
& ~PSTATE_UAO
) | (value
& PSTATE_UAO
);
4385 static const ARMCPRegInfo uao_reginfo
= {
4386 .name
= "UAO", .state
= ARM_CP_STATE_AA64
,
4387 .opc0
= 3, .opc1
= 0, .crn
= 4, .crm
= 2, .opc2
= 4,
4388 .type
= ARM_CP_NO_RAW
, .access
= PL1_RW
,
4389 .readfn
= aa64_uao_read
, .writefn
= aa64_uao_write
4392 static CPAccessResult
aa64_cacheop_poc_access(CPUARMState
*env
,
4393 const ARMCPRegInfo
*ri
,
4396 /* Cache invalidate/clean to Point of Coherency or Persistence... */
4397 switch (arm_current_el(env
)) {
4399 /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */
4400 if (!(arm_sctlr(env
, 0) & SCTLR_UCI
)) {
4401 return CP_ACCESS_TRAP
;
4405 /* ... EL1 must trap to EL2 if HCR_EL2.TPCP is set. */
4406 if (arm_hcr_el2_eff(env
) & HCR_TPCP
) {
4407 return CP_ACCESS_TRAP_EL2
;
4411 return CP_ACCESS_OK
;
4414 static CPAccessResult
aa64_cacheop_pou_access(CPUARMState
*env
,
4415 const ARMCPRegInfo
*ri
,
4418 /* Cache invalidate/clean to Point of Unification... */
4419 switch (arm_current_el(env
)) {
4421 /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */
4422 if (!(arm_sctlr(env
, 0) & SCTLR_UCI
)) {
4423 return CP_ACCESS_TRAP
;
4427 /* ... EL1 must trap to EL2 if HCR_EL2.TPU is set. */
4428 if (arm_hcr_el2_eff(env
) & HCR_TPU
) {
4429 return CP_ACCESS_TRAP_EL2
;
4433 return CP_ACCESS_OK
;
4436 /* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions
4437 * Page D4-1736 (DDI0487A.b)
4440 static int vae1_tlbmask(CPUARMState
*env
)
4442 /* Since we exclude secure first, we may read HCR_EL2 directly. */
4443 if (arm_is_secure_below_el3(env
)) {
4444 return ARMMMUIdxBit_SE10_1
|
4445 ARMMMUIdxBit_SE10_1_PAN
|
4446 ARMMMUIdxBit_SE10_0
;
4447 } else if ((env
->cp15
.hcr_el2
& (HCR_E2H
| HCR_TGE
))
4448 == (HCR_E2H
| HCR_TGE
)) {
4449 return ARMMMUIdxBit_E20_2
|
4450 ARMMMUIdxBit_E20_2_PAN
|
4453 return ARMMMUIdxBit_E10_1
|
4454 ARMMMUIdxBit_E10_1_PAN
|
4459 static void tlbi_aa64_vmalle1is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4462 CPUState
*cs
= env_cpu(env
);
4463 int mask
= vae1_tlbmask(env
);
4465 tlb_flush_by_mmuidx_all_cpus_synced(cs
, mask
);
4468 static void tlbi_aa64_vmalle1_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4471 CPUState
*cs
= env_cpu(env
);
4472 int mask
= vae1_tlbmask(env
);
4474 if (tlb_force_broadcast(env
)) {
4475 tlb_flush_by_mmuidx_all_cpus_synced(cs
, mask
);
4477 tlb_flush_by_mmuidx(cs
, mask
);
4481 static int alle1_tlbmask(CPUARMState
*env
)
4484 * Note that the 'ALL' scope must invalidate both stage 1 and
4485 * stage 2 translations, whereas most other scopes only invalidate
4486 * stage 1 translations.
4488 if (arm_is_secure_below_el3(env
)) {
4489 return ARMMMUIdxBit_SE10_1
|
4490 ARMMMUIdxBit_SE10_1_PAN
|
4491 ARMMMUIdxBit_SE10_0
;
4493 return ARMMMUIdxBit_E10_1
|
4494 ARMMMUIdxBit_E10_1_PAN
|
4499 static int e2_tlbmask(CPUARMState
*env
)
4501 /* TODO: ARMv8.4-SecEL2 */
4502 return ARMMMUIdxBit_E20_0
|
4503 ARMMMUIdxBit_E20_2
|
4504 ARMMMUIdxBit_E20_2_PAN
|
4508 static void tlbi_aa64_alle1_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4511 CPUState
*cs
= env_cpu(env
);
4512 int mask
= alle1_tlbmask(env
);
4514 tlb_flush_by_mmuidx(cs
, mask
);
4517 static void tlbi_aa64_alle2_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4520 CPUState
*cs
= env_cpu(env
);
4521 int mask
= e2_tlbmask(env
);
4523 tlb_flush_by_mmuidx(cs
, mask
);
4526 static void tlbi_aa64_alle3_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4529 ARMCPU
*cpu
= env_archcpu(env
);
4530 CPUState
*cs
= CPU(cpu
);
4532 tlb_flush_by_mmuidx(cs
, ARMMMUIdxBit_SE3
);
4535 static void tlbi_aa64_alle1is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4538 CPUState
*cs
= env_cpu(env
);
4539 int mask
= alle1_tlbmask(env
);
4541 tlb_flush_by_mmuidx_all_cpus_synced(cs
, mask
);
4544 static void tlbi_aa64_alle2is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4547 CPUState
*cs
= env_cpu(env
);
4548 int mask
= e2_tlbmask(env
);
4550 tlb_flush_by_mmuidx_all_cpus_synced(cs
, mask
);
4553 static void tlbi_aa64_alle3is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4556 CPUState
*cs
= env_cpu(env
);
4558 tlb_flush_by_mmuidx_all_cpus_synced(cs
, ARMMMUIdxBit_SE3
);
4561 static void tlbi_aa64_vae2_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4564 /* Invalidate by VA, EL2
4565 * Currently handles both VAE2 and VALE2, since we don't support
4566 * flush-last-level-only.
4568 CPUState
*cs
= env_cpu(env
);
4569 int mask
= e2_tlbmask(env
);
4570 uint64_t pageaddr
= sextract64(value
<< 12, 0, 56);
4572 tlb_flush_page_by_mmuidx(cs
, pageaddr
, mask
);
4575 static void tlbi_aa64_vae3_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4578 /* Invalidate by VA, EL3
4579 * Currently handles both VAE3 and VALE3, since we don't support
4580 * flush-last-level-only.
4582 ARMCPU
*cpu
= env_archcpu(env
);
4583 CPUState
*cs
= CPU(cpu
);
4584 uint64_t pageaddr
= sextract64(value
<< 12, 0, 56);
4586 tlb_flush_page_by_mmuidx(cs
, pageaddr
, ARMMMUIdxBit_SE3
);
4589 static void tlbi_aa64_vae1is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4592 CPUState
*cs
= env_cpu(env
);
4593 int mask
= vae1_tlbmask(env
);
4594 uint64_t pageaddr
= sextract64(value
<< 12, 0, 56);
4596 tlb_flush_page_by_mmuidx_all_cpus_synced(cs
, pageaddr
, mask
);
4599 static void tlbi_aa64_vae1_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4602 /* Invalidate by VA, EL1&0 (AArch64 version).
4603 * Currently handles all of VAE1, VAAE1, VAALE1 and VALE1,
4604 * since we don't support flush-for-specific-ASID-only or
4605 * flush-last-level-only.
4607 CPUState
*cs
= env_cpu(env
);
4608 int mask
= vae1_tlbmask(env
);
4609 uint64_t pageaddr
= sextract64(value
<< 12, 0, 56);
4611 if (tlb_force_broadcast(env
)) {
4612 tlb_flush_page_by_mmuidx_all_cpus_synced(cs
, pageaddr
, mask
);
4614 tlb_flush_page_by_mmuidx(cs
, pageaddr
, mask
);
4618 static void tlbi_aa64_vae2is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4621 CPUState
*cs
= env_cpu(env
);
4622 uint64_t pageaddr
= sextract64(value
<< 12, 0, 56);
4624 tlb_flush_page_by_mmuidx_all_cpus_synced(cs
, pageaddr
,
4628 static void tlbi_aa64_vae3is_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4631 CPUState
*cs
= env_cpu(env
);
4632 uint64_t pageaddr
= sextract64(value
<< 12, 0, 56);
4634 tlb_flush_page_by_mmuidx_all_cpus_synced(cs
, pageaddr
,
4638 static CPAccessResult
aa64_zva_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4641 int cur_el
= arm_current_el(env
);
4644 uint64_t hcr
= arm_hcr_el2_eff(env
);
4647 if ((hcr
& (HCR_E2H
| HCR_TGE
)) == (HCR_E2H
| HCR_TGE
)) {
4648 if (!(env
->cp15
.sctlr_el
[2] & SCTLR_DZE
)) {
4649 return CP_ACCESS_TRAP_EL2
;
4652 if (!(env
->cp15
.sctlr_el
[1] & SCTLR_DZE
)) {
4653 return CP_ACCESS_TRAP
;
4655 if (hcr
& HCR_TDZ
) {
4656 return CP_ACCESS_TRAP_EL2
;
4659 } else if (hcr
& HCR_TDZ
) {
4660 return CP_ACCESS_TRAP_EL2
;
4663 return CP_ACCESS_OK
;
4666 static uint64_t aa64_dczid_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
4668 ARMCPU
*cpu
= env_archcpu(env
);
4669 int dzp_bit
= 1 << 4;
4671 /* DZP indicates whether DC ZVA access is allowed */
4672 if (aa64_zva_access(env
, NULL
, false) == CP_ACCESS_OK
) {
4675 return cpu
->dcz_blocksize
| dzp_bit
;
4678 static CPAccessResult
sp_el0_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4681 if (!(env
->pstate
& PSTATE_SP
)) {
4682 /* Access to SP_EL0 is undefined if it's being used as
4683 * the stack pointer.
4685 return CP_ACCESS_TRAP_UNCATEGORIZED
;
4687 return CP_ACCESS_OK
;
4690 static uint64_t spsel_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
4692 return env
->pstate
& PSTATE_SP
;
4695 static void spsel_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
, uint64_t val
)
4697 update_spsel(env
, val
);
4700 static void sctlr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4703 ARMCPU
*cpu
= env_archcpu(env
);
4705 if (arm_feature(env
, ARM_FEATURE_PMSA
) && !cpu
->has_mpu
) {
4706 /* M bit is RAZ/WI for PMSA with no MPU implemented */
4710 /* ??? Lots of these bits are not implemented. */
4712 if (ri
->state
== ARM_CP_STATE_AA64
&& !cpu_isar_feature(aa64_mte
, cpu
)) {
4713 if (ri
->opc1
== 6) { /* SCTLR_EL3 */
4714 value
&= ~(SCTLR_ITFSB
| SCTLR_TCF
| SCTLR_ATA
);
4716 value
&= ~(SCTLR_ITFSB
| SCTLR_TCF0
| SCTLR_TCF
|
4717 SCTLR_ATA0
| SCTLR_ATA
);
4721 if (raw_read(env
, ri
) == value
) {
4722 /* Skip the TLB flush if nothing actually changed; Linux likes
4723 * to do a lot of pointless SCTLR writes.
4728 raw_write(env
, ri
, value
);
4730 /* This may enable/disable the MMU, so do a TLB flush. */
4731 tlb_flush(CPU(cpu
));
4733 if (ri
->type
& ARM_CP_SUPPRESS_TB_END
) {
4735 * Normally we would always end the TB on an SCTLR write; see the
4736 * comment in ARMCPRegInfo sctlr initialization below for why Xscale
4737 * is special. Setting ARM_CP_SUPPRESS_TB_END also stops the rebuild
4738 * of hflags from the translator, so do it here.
4740 arm_rebuild_hflags(env
);
4744 static CPAccessResult
fpexc32_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4747 if ((env
->cp15
.cptr_el
[2] & CPTR_TFP
) && arm_current_el(env
) == 2) {
4748 return CP_ACCESS_TRAP_FP_EL2
;
4750 if (env
->cp15
.cptr_el
[3] & CPTR_TFP
) {
4751 return CP_ACCESS_TRAP_FP_EL3
;
4753 return CP_ACCESS_OK
;
4756 static void sdcr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
4759 env
->cp15
.mdcr_el3
= value
& SDCR_VALID_MASK
;
4762 static const ARMCPRegInfo v8_cp_reginfo
[] = {
4763 /* Minimal set of EL0-visible registers. This will need to be expanded
4764 * significantly for system emulation of AArch64 CPUs.
4766 { .name
= "NZCV", .state
= ARM_CP_STATE_AA64
,
4767 .opc0
= 3, .opc1
= 3, .opc2
= 0, .crn
= 4, .crm
= 2,
4768 .access
= PL0_RW
, .type
= ARM_CP_NZCV
},
4769 { .name
= "DAIF", .state
= ARM_CP_STATE_AA64
,
4770 .opc0
= 3, .opc1
= 3, .opc2
= 1, .crn
= 4, .crm
= 2,
4771 .type
= ARM_CP_NO_RAW
,
4772 .access
= PL0_RW
, .accessfn
= aa64_daif_access
,
4773 .fieldoffset
= offsetof(CPUARMState
, daif
),
4774 .writefn
= aa64_daif_write
, .resetfn
= arm_cp_reset_ignore
},
4775 { .name
= "FPCR", .state
= ARM_CP_STATE_AA64
,
4776 .opc0
= 3, .opc1
= 3, .opc2
= 0, .crn
= 4, .crm
= 4,
4777 .access
= PL0_RW
, .type
= ARM_CP_FPU
| ARM_CP_SUPPRESS_TB_END
,
4778 .readfn
= aa64_fpcr_read
, .writefn
= aa64_fpcr_write
},
4779 { .name
= "FPSR", .state
= ARM_CP_STATE_AA64
,
4780 .opc0
= 3, .opc1
= 3, .opc2
= 1, .crn
= 4, .crm
= 4,
4781 .access
= PL0_RW
, .type
= ARM_CP_FPU
| ARM_CP_SUPPRESS_TB_END
,
4782 .readfn
= aa64_fpsr_read
, .writefn
= aa64_fpsr_write
},
4783 { .name
= "DCZID_EL0", .state
= ARM_CP_STATE_AA64
,
4784 .opc0
= 3, .opc1
= 3, .opc2
= 7, .crn
= 0, .crm
= 0,
4785 .access
= PL0_R
, .type
= ARM_CP_NO_RAW
,
4786 .readfn
= aa64_dczid_read
},
4787 { .name
= "DC_ZVA", .state
= ARM_CP_STATE_AA64
,
4788 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 4, .opc2
= 1,
4789 .access
= PL0_W
, .type
= ARM_CP_DC_ZVA
,
4790 #ifndef CONFIG_USER_ONLY
4791 /* Avoid overhead of an access check that always passes in user-mode */
4792 .accessfn
= aa64_zva_access
,
4795 { .name
= "CURRENTEL", .state
= ARM_CP_STATE_AA64
,
4796 .opc0
= 3, .opc1
= 0, .opc2
= 2, .crn
= 4, .crm
= 2,
4797 .access
= PL1_R
, .type
= ARM_CP_CURRENTEL
},
4798 /* Cache ops: all NOPs since we don't emulate caches */
4799 { .name
= "IC_IALLUIS", .state
= ARM_CP_STATE_AA64
,
4800 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 1, .opc2
= 0,
4801 .access
= PL1_W
, .type
= ARM_CP_NOP
,
4802 .accessfn
= aa64_cacheop_pou_access
},
4803 { .name
= "IC_IALLU", .state
= ARM_CP_STATE_AA64
,
4804 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 5, .opc2
= 0,
4805 .access
= PL1_W
, .type
= ARM_CP_NOP
,
4806 .accessfn
= aa64_cacheop_pou_access
},
4807 { .name
= "IC_IVAU", .state
= ARM_CP_STATE_AA64
,
4808 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 5, .opc2
= 1,
4809 .access
= PL0_W
, .type
= ARM_CP_NOP
,
4810 .accessfn
= aa64_cacheop_pou_access
},
4811 { .name
= "DC_IVAC", .state
= ARM_CP_STATE_AA64
,
4812 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 6, .opc2
= 1,
4813 .access
= PL1_W
, .accessfn
= aa64_cacheop_poc_access
,
4814 .type
= ARM_CP_NOP
},
4815 { .name
= "DC_ISW", .state
= ARM_CP_STATE_AA64
,
4816 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 6, .opc2
= 2,
4817 .access
= PL1_W
, .accessfn
= access_tsw
, .type
= ARM_CP_NOP
},
4818 { .name
= "DC_CVAC", .state
= ARM_CP_STATE_AA64
,
4819 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 10, .opc2
= 1,
4820 .access
= PL0_W
, .type
= ARM_CP_NOP
,
4821 .accessfn
= aa64_cacheop_poc_access
},
4822 { .name
= "DC_CSW", .state
= ARM_CP_STATE_AA64
,
4823 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 10, .opc2
= 2,
4824 .access
= PL1_W
, .accessfn
= access_tsw
, .type
= ARM_CP_NOP
},
4825 { .name
= "DC_CVAU", .state
= ARM_CP_STATE_AA64
,
4826 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 11, .opc2
= 1,
4827 .access
= PL0_W
, .type
= ARM_CP_NOP
,
4828 .accessfn
= aa64_cacheop_pou_access
},
4829 { .name
= "DC_CIVAC", .state
= ARM_CP_STATE_AA64
,
4830 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 14, .opc2
= 1,
4831 .access
= PL0_W
, .type
= ARM_CP_NOP
,
4832 .accessfn
= aa64_cacheop_poc_access
},
4833 { .name
= "DC_CISW", .state
= ARM_CP_STATE_AA64
,
4834 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 14, .opc2
= 2,
4835 .access
= PL1_W
, .accessfn
= access_tsw
, .type
= ARM_CP_NOP
},
4836 /* TLBI operations */
4837 { .name
= "TLBI_VMALLE1IS", .state
= ARM_CP_STATE_AA64
,
4838 .opc0
= 1, .opc1
= 0, .crn
= 8, .crm
= 3, .opc2
= 0,
4839 .access
= PL1_W
, .accessfn
= access_ttlb
, .type
= ARM_CP_NO_RAW
,
4840 .writefn
= tlbi_aa64_vmalle1is_write
},
4841 { .name
= "TLBI_VAE1IS", .state
= ARM_CP_STATE_AA64
,
4842 .opc0
= 1, .opc1
= 0, .crn
= 8, .crm
= 3, .opc2
= 1,
4843 .access
= PL1_W
, .accessfn
= access_ttlb
, .type
= ARM_CP_NO_RAW
,
4844 .writefn
= tlbi_aa64_vae1is_write
},
4845 { .name
= "TLBI_ASIDE1IS", .state
= ARM_CP_STATE_AA64
,
4846 .opc0
= 1, .opc1
= 0, .crn
= 8, .crm
= 3, .opc2
= 2,
4847 .access
= PL1_W
, .accessfn
= access_ttlb
, .type
= ARM_CP_NO_RAW
,
4848 .writefn
= tlbi_aa64_vmalle1is_write
},
4849 { .name
= "TLBI_VAAE1IS", .state
= ARM_CP_STATE_AA64
,
4850 .opc0
= 1, .opc1
= 0, .crn
= 8, .crm
= 3, .opc2
= 3,
4851 .access
= PL1_W
, .accessfn
= access_ttlb
, .type
= ARM_CP_NO_RAW
,
4852 .writefn
= tlbi_aa64_vae1is_write
},
4853 { .name
= "TLBI_VALE1IS", .state
= ARM_CP_STATE_AA64
,
4854 .opc0
= 1, .opc1
= 0, .crn
= 8, .crm
= 3, .opc2
= 5,
4855 .access
= PL1_W
, .accessfn
= access_ttlb
, .type
= ARM_CP_NO_RAW
,
4856 .writefn
= tlbi_aa64_vae1is_write
},
4857 { .name
= "TLBI_VAALE1IS", .state
= ARM_CP_STATE_AA64
,
4858 .opc0
= 1, .opc1
= 0, .crn
= 8, .crm
= 3, .opc2
= 7,
4859 .access
= PL1_W
, .accessfn
= access_ttlb
, .type
= ARM_CP_NO_RAW
,
4860 .writefn
= tlbi_aa64_vae1is_write
},
4861 { .name
= "TLBI_VMALLE1", .state
= ARM_CP_STATE_AA64
,
4862 .opc0
= 1, .opc1
= 0, .crn
= 8, .crm
= 7, .opc2
= 0,
4863 .access
= PL1_W
, .accessfn
= access_ttlb
, .type
= ARM_CP_NO_RAW
,
4864 .writefn
= tlbi_aa64_vmalle1_write
},
4865 { .name
= "TLBI_VAE1", .state
= ARM_CP_STATE_AA64
,
4866 .opc0
= 1, .opc1
= 0, .crn
= 8, .crm
= 7, .opc2
= 1,
4867 .access
= PL1_W
, .accessfn
= access_ttlb
, .type
= ARM_CP_NO_RAW
,
4868 .writefn
= tlbi_aa64_vae1_write
},
4869 { .name
= "TLBI_ASIDE1", .state
= ARM_CP_STATE_AA64
,
4870 .opc0
= 1, .opc1
= 0, .crn
= 8, .crm
= 7, .opc2
= 2,
4871 .access
= PL1_W
, .accessfn
= access_ttlb
, .type
= ARM_CP_NO_RAW
,
4872 .writefn
= tlbi_aa64_vmalle1_write
},
4873 { .name
= "TLBI_VAAE1", .state
= ARM_CP_STATE_AA64
,
4874 .opc0
= 1, .opc1
= 0, .crn
= 8, .crm
= 7, .opc2
= 3,
4875 .access
= PL1_W
, .accessfn
= access_ttlb
, .type
= ARM_CP_NO_RAW
,
4876 .writefn
= tlbi_aa64_vae1_write
},
4877 { .name
= "TLBI_VALE1", .state
= ARM_CP_STATE_AA64
,
4878 .opc0
= 1, .opc1
= 0, .crn
= 8, .crm
= 7, .opc2
= 5,
4879 .access
= PL1_W
, .accessfn
= access_ttlb
, .type
= ARM_CP_NO_RAW
,
4880 .writefn
= tlbi_aa64_vae1_write
},
4881 { .name
= "TLBI_VAALE1", .state
= ARM_CP_STATE_AA64
,
4882 .opc0
= 1, .opc1
= 0, .crn
= 8, .crm
= 7, .opc2
= 7,
4883 .access
= PL1_W
, .accessfn
= access_ttlb
, .type
= ARM_CP_NO_RAW
,
4884 .writefn
= tlbi_aa64_vae1_write
},
4885 { .name
= "TLBI_IPAS2E1IS", .state
= ARM_CP_STATE_AA64
,
4886 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 0, .opc2
= 1,
4887 .access
= PL2_W
, .type
= ARM_CP_NOP
},
4888 { .name
= "TLBI_IPAS2LE1IS", .state
= ARM_CP_STATE_AA64
,
4889 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 0, .opc2
= 5,
4890 .access
= PL2_W
, .type
= ARM_CP_NOP
},
4891 { .name
= "TLBI_ALLE1IS", .state
= ARM_CP_STATE_AA64
,
4892 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 3, .opc2
= 4,
4893 .access
= PL2_W
, .type
= ARM_CP_NO_RAW
,
4894 .writefn
= tlbi_aa64_alle1is_write
},
4895 { .name
= "TLBI_VMALLS12E1IS", .state
= ARM_CP_STATE_AA64
,
4896 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 3, .opc2
= 6,
4897 .access
= PL2_W
, .type
= ARM_CP_NO_RAW
,
4898 .writefn
= tlbi_aa64_alle1is_write
},
4899 { .name
= "TLBI_IPAS2E1", .state
= ARM_CP_STATE_AA64
,
4900 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 4, .opc2
= 1,
4901 .access
= PL2_W
, .type
= ARM_CP_NOP
},
4902 { .name
= "TLBI_IPAS2LE1", .state
= ARM_CP_STATE_AA64
,
4903 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 4, .opc2
= 5,
4904 .access
= PL2_W
, .type
= ARM_CP_NOP
},
4905 { .name
= "TLBI_ALLE1", .state
= ARM_CP_STATE_AA64
,
4906 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 7, .opc2
= 4,
4907 .access
= PL2_W
, .type
= ARM_CP_NO_RAW
,
4908 .writefn
= tlbi_aa64_alle1_write
},
4909 { .name
= "TLBI_VMALLS12E1", .state
= ARM_CP_STATE_AA64
,
4910 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 7, .opc2
= 6,
4911 .access
= PL2_W
, .type
= ARM_CP_NO_RAW
,
4912 .writefn
= tlbi_aa64_alle1is_write
},
4913 #ifndef CONFIG_USER_ONLY
4914 /* 64 bit address translation operations */
4915 { .name
= "AT_S1E1R", .state
= ARM_CP_STATE_AA64
,
4916 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 8, .opc2
= 0,
4917 .access
= PL1_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
4918 .writefn
= ats_write64
},
4919 { .name
= "AT_S1E1W", .state
= ARM_CP_STATE_AA64
,
4920 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 8, .opc2
= 1,
4921 .access
= PL1_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
4922 .writefn
= ats_write64
},
4923 { .name
= "AT_S1E0R", .state
= ARM_CP_STATE_AA64
,
4924 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 8, .opc2
= 2,
4925 .access
= PL1_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
4926 .writefn
= ats_write64
},
4927 { .name
= "AT_S1E0W", .state
= ARM_CP_STATE_AA64
,
4928 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 8, .opc2
= 3,
4929 .access
= PL1_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
4930 .writefn
= ats_write64
},
4931 { .name
= "AT_S12E1R", .state
= ARM_CP_STATE_AA64
,
4932 .opc0
= 1, .opc1
= 4, .crn
= 7, .crm
= 8, .opc2
= 4,
4933 .access
= PL2_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
4934 .writefn
= ats_write64
},
4935 { .name
= "AT_S12E1W", .state
= ARM_CP_STATE_AA64
,
4936 .opc0
= 1, .opc1
= 4, .crn
= 7, .crm
= 8, .opc2
= 5,
4937 .access
= PL2_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
4938 .writefn
= ats_write64
},
4939 { .name
= "AT_S12E0R", .state
= ARM_CP_STATE_AA64
,
4940 .opc0
= 1, .opc1
= 4, .crn
= 7, .crm
= 8, .opc2
= 6,
4941 .access
= PL2_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
4942 .writefn
= ats_write64
},
4943 { .name
= "AT_S12E0W", .state
= ARM_CP_STATE_AA64
,
4944 .opc0
= 1, .opc1
= 4, .crn
= 7, .crm
= 8, .opc2
= 7,
4945 .access
= PL2_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
4946 .writefn
= ats_write64
},
4947 /* AT S1E2* are elsewhere as they UNDEF from EL3 if EL2 is not present */
4948 { .name
= "AT_S1E3R", .state
= ARM_CP_STATE_AA64
,
4949 .opc0
= 1, .opc1
= 6, .crn
= 7, .crm
= 8, .opc2
= 0,
4950 .access
= PL3_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
4951 .writefn
= ats_write64
},
4952 { .name
= "AT_S1E3W", .state
= ARM_CP_STATE_AA64
,
4953 .opc0
= 1, .opc1
= 6, .crn
= 7, .crm
= 8, .opc2
= 1,
4954 .access
= PL3_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
4955 .writefn
= ats_write64
},
4956 { .name
= "PAR_EL1", .state
= ARM_CP_STATE_AA64
,
4957 .type
= ARM_CP_ALIAS
,
4958 .opc0
= 3, .opc1
= 0, .crn
= 7, .crm
= 4, .opc2
= 0,
4959 .access
= PL1_RW
, .resetvalue
= 0,
4960 .fieldoffset
= offsetof(CPUARMState
, cp15
.par_el
[1]),
4961 .writefn
= par_write
},
4963 /* TLB invalidate last level of translation table walk */
4964 { .name
= "TLBIMVALIS", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 3, .opc2
= 5,
4965 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
4966 .writefn
= tlbimva_is_write
},
4967 { .name
= "TLBIMVAALIS", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 3, .opc2
= 7,
4968 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
4969 .writefn
= tlbimvaa_is_write
},
4970 { .name
= "TLBIMVAL", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 7, .opc2
= 5,
4971 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
4972 .writefn
= tlbimva_write
},
4973 { .name
= "TLBIMVAAL", .cp
= 15, .opc1
= 0, .crn
= 8, .crm
= 7, .opc2
= 7,
4974 .type
= ARM_CP_NO_RAW
, .access
= PL1_W
, .accessfn
= access_ttlb
,
4975 .writefn
= tlbimvaa_write
},
4976 { .name
= "TLBIMVALH", .cp
= 15, .opc1
= 4, .crn
= 8, .crm
= 7, .opc2
= 5,
4977 .type
= ARM_CP_NO_RAW
, .access
= PL2_W
,
4978 .writefn
= tlbimva_hyp_write
},
4979 { .name
= "TLBIMVALHIS",
4980 .cp
= 15, .opc1
= 4, .crn
= 8, .crm
= 3, .opc2
= 5,
4981 .type
= ARM_CP_NO_RAW
, .access
= PL2_W
,
4982 .writefn
= tlbimva_hyp_is_write
},
4983 { .name
= "TLBIIPAS2",
4984 .cp
= 15, .opc1
= 4, .crn
= 8, .crm
= 4, .opc2
= 1,
4985 .type
= ARM_CP_NOP
, .access
= PL2_W
},
4986 { .name
= "TLBIIPAS2IS",
4987 .cp
= 15, .opc1
= 4, .crn
= 8, .crm
= 0, .opc2
= 1,
4988 .type
= ARM_CP_NOP
, .access
= PL2_W
},
4989 { .name
= "TLBIIPAS2L",
4990 .cp
= 15, .opc1
= 4, .crn
= 8, .crm
= 4, .opc2
= 5,
4991 .type
= ARM_CP_NOP
, .access
= PL2_W
},
4992 { .name
= "TLBIIPAS2LIS",
4993 .cp
= 15, .opc1
= 4, .crn
= 8, .crm
= 0, .opc2
= 5,
4994 .type
= ARM_CP_NOP
, .access
= PL2_W
},
4995 /* 32 bit cache operations */
4996 { .name
= "ICIALLUIS", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 1, .opc2
= 0,
4997 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= aa64_cacheop_pou_access
},
4998 { .name
= "BPIALLUIS", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 1, .opc2
= 6,
4999 .type
= ARM_CP_NOP
, .access
= PL1_W
},
5000 { .name
= "ICIALLU", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 5, .opc2
= 0,
5001 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= aa64_cacheop_pou_access
},
5002 { .name
= "ICIMVAU", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 5, .opc2
= 1,
5003 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= aa64_cacheop_pou_access
},
5004 { .name
= "BPIALL", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 5, .opc2
= 6,
5005 .type
= ARM_CP_NOP
, .access
= PL1_W
},
5006 { .name
= "BPIMVA", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 5, .opc2
= 7,
5007 .type
= ARM_CP_NOP
, .access
= PL1_W
},
5008 { .name
= "DCIMVAC", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 6, .opc2
= 1,
5009 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= aa64_cacheop_poc_access
},
5010 { .name
= "DCISW", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 6, .opc2
= 2,
5011 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= access_tsw
},
5012 { .name
= "DCCMVAC", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 10, .opc2
= 1,
5013 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= aa64_cacheop_poc_access
},
5014 { .name
= "DCCSW", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 10, .opc2
= 2,
5015 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= access_tsw
},
5016 { .name
= "DCCMVAU", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 11, .opc2
= 1,
5017 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= aa64_cacheop_pou_access
},
5018 { .name
= "DCCIMVAC", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 14, .opc2
= 1,
5019 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= aa64_cacheop_poc_access
},
5020 { .name
= "DCCISW", .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 14, .opc2
= 2,
5021 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= access_tsw
},
5022 /* MMU Domain access control / MPU write buffer control */
5023 { .name
= "DACR", .cp
= 15, .opc1
= 0, .crn
= 3, .crm
= 0, .opc2
= 0,
5024 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
, .resetvalue
= 0,
5025 .writefn
= dacr_write
, .raw_writefn
= raw_write
,
5026 .bank_fieldoffsets
= { offsetoflow32(CPUARMState
, cp15
.dacr_s
),
5027 offsetoflow32(CPUARMState
, cp15
.dacr_ns
) } },
5028 { .name
= "ELR_EL1", .state
= ARM_CP_STATE_AA64
,
5029 .type
= ARM_CP_ALIAS
,
5030 .opc0
= 3, .opc1
= 0, .crn
= 4, .crm
= 0, .opc2
= 1,
5032 .fieldoffset
= offsetof(CPUARMState
, elr_el
[1]) },
5033 { .name
= "SPSR_EL1", .state
= ARM_CP_STATE_AA64
,
5034 .type
= ARM_CP_ALIAS
,
5035 .opc0
= 3, .opc1
= 0, .crn
= 4, .crm
= 0, .opc2
= 0,
5037 .fieldoffset
= offsetof(CPUARMState
, banked_spsr
[BANK_SVC
]) },
5038 /* We rely on the access checks not allowing the guest to write to the
5039 * state field when SPSel indicates that it's being used as the stack
5042 { .name
= "SP_EL0", .state
= ARM_CP_STATE_AA64
,
5043 .opc0
= 3, .opc1
= 0, .crn
= 4, .crm
= 1, .opc2
= 0,
5044 .access
= PL1_RW
, .accessfn
= sp_el0_access
,
5045 .type
= ARM_CP_ALIAS
,
5046 .fieldoffset
= offsetof(CPUARMState
, sp_el
[0]) },
5047 { .name
= "SP_EL1", .state
= ARM_CP_STATE_AA64
,
5048 .opc0
= 3, .opc1
= 4, .crn
= 4, .crm
= 1, .opc2
= 0,
5049 .access
= PL2_RW
, .type
= ARM_CP_ALIAS
,
5050 .fieldoffset
= offsetof(CPUARMState
, sp_el
[1]) },
5051 { .name
= "SPSel", .state
= ARM_CP_STATE_AA64
,
5052 .opc0
= 3, .opc1
= 0, .crn
= 4, .crm
= 2, .opc2
= 0,
5053 .type
= ARM_CP_NO_RAW
,
5054 .access
= PL1_RW
, .readfn
= spsel_read
, .writefn
= spsel_write
},
5055 { .name
= "FPEXC32_EL2", .state
= ARM_CP_STATE_AA64
,
5056 .opc0
= 3, .opc1
= 4, .crn
= 5, .crm
= 3, .opc2
= 0,
5057 .type
= ARM_CP_ALIAS
,
5058 .fieldoffset
= offsetof(CPUARMState
, vfp
.xregs
[ARM_VFP_FPEXC
]),
5059 .access
= PL2_RW
, .accessfn
= fpexc32_access
},
5060 { .name
= "DACR32_EL2", .state
= ARM_CP_STATE_AA64
,
5061 .opc0
= 3, .opc1
= 4, .crn
= 3, .crm
= 0, .opc2
= 0,
5062 .access
= PL2_RW
, .resetvalue
= 0,
5063 .writefn
= dacr_write
, .raw_writefn
= raw_write
,
5064 .fieldoffset
= offsetof(CPUARMState
, cp15
.dacr32_el2
) },
5065 { .name
= "IFSR32_EL2", .state
= ARM_CP_STATE_AA64
,
5066 .opc0
= 3, .opc1
= 4, .crn
= 5, .crm
= 0, .opc2
= 1,
5067 .access
= PL2_RW
, .resetvalue
= 0,
5068 .fieldoffset
= offsetof(CPUARMState
, cp15
.ifsr32_el2
) },
5069 { .name
= "SPSR_IRQ", .state
= ARM_CP_STATE_AA64
,
5070 .type
= ARM_CP_ALIAS
,
5071 .opc0
= 3, .opc1
= 4, .crn
= 4, .crm
= 3, .opc2
= 0,
5073 .fieldoffset
= offsetof(CPUARMState
, banked_spsr
[BANK_IRQ
]) },
5074 { .name
= "SPSR_ABT", .state
= ARM_CP_STATE_AA64
,
5075 .type
= ARM_CP_ALIAS
,
5076 .opc0
= 3, .opc1
= 4, .crn
= 4, .crm
= 3, .opc2
= 1,
5078 .fieldoffset
= offsetof(CPUARMState
, banked_spsr
[BANK_ABT
]) },
5079 { .name
= "SPSR_UND", .state
= ARM_CP_STATE_AA64
,
5080 .type
= ARM_CP_ALIAS
,
5081 .opc0
= 3, .opc1
= 4, .crn
= 4, .crm
= 3, .opc2
= 2,
5083 .fieldoffset
= offsetof(CPUARMState
, banked_spsr
[BANK_UND
]) },
5084 { .name
= "SPSR_FIQ", .state
= ARM_CP_STATE_AA64
,
5085 .type
= ARM_CP_ALIAS
,
5086 .opc0
= 3, .opc1
= 4, .crn
= 4, .crm
= 3, .opc2
= 3,
5088 .fieldoffset
= offsetof(CPUARMState
, banked_spsr
[BANK_FIQ
]) },
5089 { .name
= "MDCR_EL3", .state
= ARM_CP_STATE_AA64
,
5090 .opc0
= 3, .opc1
= 6, .crn
= 1, .crm
= 3, .opc2
= 1,
5092 .access
= PL3_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.mdcr_el3
) },
5093 { .name
= "SDCR", .type
= ARM_CP_ALIAS
,
5094 .cp
= 15, .opc1
= 0, .crn
= 1, .crm
= 3, .opc2
= 1,
5095 .access
= PL1_RW
, .accessfn
= access_trap_aa32s_el1
,
5096 .writefn
= sdcr_write
,
5097 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.mdcr_el3
) },
5101 /* Used to describe the behaviour of EL2 regs when EL2 does not exist. */
5102 static const ARMCPRegInfo el3_no_el2_cp_reginfo
[] = {
5103 { .name
= "VBAR_EL2", .state
= ARM_CP_STATE_BOTH
,
5104 .opc0
= 3, .opc1
= 4, .crn
= 12, .crm
= 0, .opc2
= 0,
5106 .readfn
= arm_cp_read_zero
, .writefn
= arm_cp_write_ignore
},
5107 { .name
= "HCR_EL2", .state
= ARM_CP_STATE_BOTH
,
5108 .type
= ARM_CP_NO_RAW
,
5109 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 0,
5111 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5112 { .name
= "HACR_EL2", .state
= ARM_CP_STATE_BOTH
,
5113 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 7,
5114 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5115 { .name
= "ESR_EL2", .state
= ARM_CP_STATE_BOTH
,
5116 .opc0
= 3, .opc1
= 4, .crn
= 5, .crm
= 2, .opc2
= 0,
5118 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5119 { .name
= "CPTR_EL2", .state
= ARM_CP_STATE_BOTH
,
5120 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 2,
5121 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5122 { .name
= "MAIR_EL2", .state
= ARM_CP_STATE_BOTH
,
5123 .opc0
= 3, .opc1
= 4, .crn
= 10, .crm
= 2, .opc2
= 0,
5124 .access
= PL2_RW
, .type
= ARM_CP_CONST
,
5126 { .name
= "HMAIR1", .state
= ARM_CP_STATE_AA32
,
5127 .cp
= 15, .opc1
= 4, .crn
= 10, .crm
= 2, .opc2
= 1,
5128 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5129 { .name
= "AMAIR_EL2", .state
= ARM_CP_STATE_BOTH
,
5130 .opc0
= 3, .opc1
= 4, .crn
= 10, .crm
= 3, .opc2
= 0,
5131 .access
= PL2_RW
, .type
= ARM_CP_CONST
,
5133 { .name
= "HAMAIR1", .state
= ARM_CP_STATE_AA32
,
5134 .cp
= 15, .opc1
= 4, .crn
= 10, .crm
= 3, .opc2
= 1,
5135 .access
= PL2_RW
, .type
= ARM_CP_CONST
,
5137 { .name
= "AFSR0_EL2", .state
= ARM_CP_STATE_BOTH
,
5138 .opc0
= 3, .opc1
= 4, .crn
= 5, .crm
= 1, .opc2
= 0,
5139 .access
= PL2_RW
, .type
= ARM_CP_CONST
,
5141 { .name
= "AFSR1_EL2", .state
= ARM_CP_STATE_BOTH
,
5142 .opc0
= 3, .opc1
= 4, .crn
= 5, .crm
= 1, .opc2
= 1,
5143 .access
= PL2_RW
, .type
= ARM_CP_CONST
,
5145 { .name
= "TCR_EL2", .state
= ARM_CP_STATE_BOTH
,
5146 .opc0
= 3, .opc1
= 4, .crn
= 2, .crm
= 0, .opc2
= 2,
5147 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5148 { .name
= "VTCR_EL2", .state
= ARM_CP_STATE_BOTH
,
5149 .opc0
= 3, .opc1
= 4, .crn
= 2, .crm
= 1, .opc2
= 2,
5150 .access
= PL2_RW
, .accessfn
= access_el3_aa32ns
,
5151 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5152 { .name
= "VTTBR", .state
= ARM_CP_STATE_AA32
,
5153 .cp
= 15, .opc1
= 6, .crm
= 2,
5154 .access
= PL2_RW
, .accessfn
= access_el3_aa32ns
,
5155 .type
= ARM_CP_CONST
| ARM_CP_64BIT
, .resetvalue
= 0 },
5156 { .name
= "VTTBR_EL2", .state
= ARM_CP_STATE_AA64
,
5157 .opc0
= 3, .opc1
= 4, .crn
= 2, .crm
= 1, .opc2
= 0,
5158 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5159 { .name
= "SCTLR_EL2", .state
= ARM_CP_STATE_BOTH
,
5160 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 0, .opc2
= 0,
5161 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5162 { .name
= "TPIDR_EL2", .state
= ARM_CP_STATE_BOTH
,
5163 .opc0
= 3, .opc1
= 4, .crn
= 13, .crm
= 0, .opc2
= 2,
5164 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5165 { .name
= "TTBR0_EL2", .state
= ARM_CP_STATE_AA64
,
5166 .opc0
= 3, .opc1
= 4, .crn
= 2, .crm
= 0, .opc2
= 0,
5167 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5168 { .name
= "HTTBR", .cp
= 15, .opc1
= 4, .crm
= 2,
5169 .access
= PL2_RW
, .type
= ARM_CP_64BIT
| ARM_CP_CONST
,
5171 { .name
= "CNTHCTL_EL2", .state
= ARM_CP_STATE_BOTH
,
5172 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 1, .opc2
= 0,
5173 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5174 { .name
= "CNTVOFF_EL2", .state
= ARM_CP_STATE_AA64
,
5175 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 0, .opc2
= 3,
5176 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5177 { .name
= "CNTVOFF", .cp
= 15, .opc1
= 4, .crm
= 14,
5178 .access
= PL2_RW
, .type
= ARM_CP_64BIT
| ARM_CP_CONST
,
5180 { .name
= "CNTHP_CVAL_EL2", .state
= ARM_CP_STATE_AA64
,
5181 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 2, .opc2
= 2,
5182 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5183 { .name
= "CNTHP_CVAL", .cp
= 15, .opc1
= 6, .crm
= 14,
5184 .access
= PL2_RW
, .type
= ARM_CP_64BIT
| ARM_CP_CONST
,
5186 { .name
= "CNTHP_TVAL_EL2", .state
= ARM_CP_STATE_BOTH
,
5187 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 2, .opc2
= 0,
5188 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5189 { .name
= "CNTHP_CTL_EL2", .state
= ARM_CP_STATE_BOTH
,
5190 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 2, .opc2
= 1,
5191 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5192 { .name
= "MDCR_EL2", .state
= ARM_CP_STATE_BOTH
,
5193 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 1,
5194 .access
= PL2_RW
, .accessfn
= access_tda
,
5195 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5196 { .name
= "HPFAR_EL2", .state
= ARM_CP_STATE_BOTH
,
5197 .opc0
= 3, .opc1
= 4, .crn
= 6, .crm
= 0, .opc2
= 4,
5198 .access
= PL2_RW
, .accessfn
= access_el3_aa32ns
,
5199 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5200 { .name
= "HSTR_EL2", .state
= ARM_CP_STATE_BOTH
,
5201 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 3,
5202 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5203 { .name
= "FAR_EL2", .state
= ARM_CP_STATE_BOTH
,
5204 .opc0
= 3, .opc1
= 4, .crn
= 6, .crm
= 0, .opc2
= 0,
5205 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5206 { .name
= "HIFAR", .state
= ARM_CP_STATE_AA32
,
5207 .type
= ARM_CP_CONST
,
5208 .cp
= 15, .opc1
= 4, .crn
= 6, .crm
= 0, .opc2
= 2,
5209 .access
= PL2_RW
, .resetvalue
= 0 },
5213 /* Ditto, but for registers which exist in ARMv8 but not v7 */
5214 static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo
[] = {
5215 { .name
= "HCR2", .state
= ARM_CP_STATE_AA32
,
5216 .cp
= 15, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 4,
5218 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5222 static void do_hcr_write(CPUARMState
*env
, uint64_t value
, uint64_t valid_mask
)
5224 ARMCPU
*cpu
= env_archcpu(env
);
5226 if (arm_feature(env
, ARM_FEATURE_V8
)) {
5227 valid_mask
|= MAKE_64BIT_MASK(0, 34); /* ARMv8.0 */
5229 valid_mask
|= MAKE_64BIT_MASK(0, 28); /* ARMv7VE */
5232 if (arm_feature(env
, ARM_FEATURE_EL3
)) {
5233 valid_mask
&= ~HCR_HCD
;
5234 } else if (cpu
->psci_conduit
!= QEMU_PSCI_CONDUIT_SMC
) {
5235 /* Architecturally HCR.TSC is RES0 if EL3 is not implemented.
5236 * However, if we're using the SMC PSCI conduit then QEMU is
5237 * effectively acting like EL3 firmware and so the guest at
5238 * EL2 should retain the ability to prevent EL1 from being
5239 * able to make SMC calls into the ersatz firmware, so in
5240 * that case HCR.TSC should be read/write.
5242 valid_mask
&= ~HCR_TSC
;
5245 if (arm_feature(env
, ARM_FEATURE_AARCH64
)) {
5246 if (cpu_isar_feature(aa64_vh
, cpu
)) {
5247 valid_mask
|= HCR_E2H
;
5249 if (cpu_isar_feature(aa64_lor
, cpu
)) {
5250 valid_mask
|= HCR_TLOR
;
5252 if (cpu_isar_feature(aa64_pauth
, cpu
)) {
5253 valid_mask
|= HCR_API
| HCR_APK
;
5255 if (cpu_isar_feature(aa64_mte
, cpu
)) {
5256 valid_mask
|= HCR_ATA
| HCR_DCT
| HCR_TID5
;
5260 /* Clear RES0 bits. */
5261 value
&= valid_mask
;
5264 * These bits change the MMU setup:
5265 * HCR_VM enables stage 2 translation
5266 * HCR_PTW forbids certain page-table setups
5267 * HCR_DC disables stage1 and enables stage2 translation
5268 * HCR_DCT enables tagging on (disabled) stage1 translation
5270 if ((env
->cp15
.hcr_el2
^ value
) & (HCR_VM
| HCR_PTW
| HCR_DC
| HCR_DCT
)) {
5271 tlb_flush(CPU(cpu
));
5273 env
->cp15
.hcr_el2
= value
;
5276 * Updates to VI and VF require us to update the status of
5277 * virtual interrupts, which are the logical OR of these bits
5278 * and the state of the input lines from the GIC. (This requires
5279 * that we have the iothread lock, which is done by marking the
5280 * reginfo structs as ARM_CP_IO.)
5281 * Note that if a write to HCR pends a VIRQ or VFIQ it is never
5282 * possible for it to be taken immediately, because VIRQ and
5283 * VFIQ are masked unless running at EL0 or EL1, and HCR
5284 * can only be written at EL2.
5286 g_assert(qemu_mutex_iothread_locked());
5287 arm_cpu_update_virq(cpu
);
5288 arm_cpu_update_vfiq(cpu
);
5291 static void hcr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
, uint64_t value
)
5293 do_hcr_write(env
, value
, 0);
5296 static void hcr_writehigh(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
5299 /* Handle HCR2 write, i.e. write to high half of HCR_EL2 */
5300 value
= deposit64(env
->cp15
.hcr_el2
, 32, 32, value
);
5301 do_hcr_write(env
, value
, MAKE_64BIT_MASK(0, 32));
5304 static void hcr_writelow(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
5307 /* Handle HCR write, i.e. write to low half of HCR_EL2 */
5308 value
= deposit64(env
->cp15
.hcr_el2
, 0, 32, value
);
5309 do_hcr_write(env
, value
, MAKE_64BIT_MASK(32, 32));
5313 * Return the effective value of HCR_EL2.
5314 * Bits that are not included here:
5315 * RW (read from SCR_EL3.RW as needed)
5317 uint64_t arm_hcr_el2_eff(CPUARMState
*env
)
5319 uint64_t ret
= env
->cp15
.hcr_el2
;
5321 if (arm_is_secure_below_el3(env
)) {
5323 * "This register has no effect if EL2 is not enabled in the
5324 * current Security state". This is ARMv8.4-SecEL2 speak for
5325 * !(SCR_EL3.NS==1 || SCR_EL3.EEL2==1).
5327 * Prior to that, the language was "In an implementation that
5328 * includes EL3, when the value of SCR_EL3.NS is 0 the PE behaves
5329 * as if this field is 0 for all purposes other than a direct
5330 * read or write access of HCR_EL2". With lots of enumeration
5331 * on a per-field basis. In current QEMU, this is condition
5332 * is arm_is_secure_below_el3.
5334 * Since the v8.4 language applies to the entire register, and
5335 * appears to be backward compatible, use that.
5341 * For a cpu that supports both aarch64 and aarch32, we can set bits
5342 * in HCR_EL2 (e.g. via EL3) that are RES0 when we enter EL2 as aa32.
5343 * Ignore all of the bits in HCR+HCR2 that are not valid for aarch32.
5345 if (!arm_el_is_aa64(env
, 2)) {
5346 uint64_t aa32_valid
;
5349 * These bits are up-to-date as of ARMv8.6.
5350 * For HCR, it's easiest to list just the 2 bits that are invalid.
5351 * For HCR2, list those that are valid.
5353 aa32_valid
= MAKE_64BIT_MASK(0, 32) & ~(HCR_RW
| HCR_TDZ
);
5354 aa32_valid
|= (HCR_CD
| HCR_ID
| HCR_TERR
| HCR_TEA
| HCR_MIOCNCE
|
5355 HCR_TID4
| HCR_TICAB
| HCR_TOCU
| HCR_TTLBIS
);
5359 if (ret
& HCR_TGE
) {
5360 /* These bits are up-to-date as of ARMv8.6. */
5361 if (ret
& HCR_E2H
) {
5362 ret
&= ~(HCR_VM
| HCR_FMO
| HCR_IMO
| HCR_AMO
|
5363 HCR_BSU_MASK
| HCR_DC
| HCR_TWI
| HCR_TWE
|
5364 HCR_TID0
| HCR_TID2
| HCR_TPCP
| HCR_TPU
|
5365 HCR_TDZ
| HCR_CD
| HCR_ID
| HCR_MIOCNCE
|
5366 HCR_TID4
| HCR_TICAB
| HCR_TOCU
| HCR_ENSCXT
|
5367 HCR_TTLBIS
| HCR_TTLBOS
| HCR_TID5
);
5369 ret
|= HCR_FMO
| HCR_IMO
| HCR_AMO
;
5371 ret
&= ~(HCR_SWIO
| HCR_PTW
| HCR_VF
| HCR_VI
| HCR_VSE
|
5372 HCR_FB
| HCR_TID1
| HCR_TID3
| HCR_TSC
| HCR_TACR
|
5373 HCR_TSW
| HCR_TTLB
| HCR_TVM
| HCR_HCD
| HCR_TRVM
|
5380 static void cptr_el2_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
5384 * For A-profile AArch32 EL3, if NSACR.CP10
5385 * is 0 then HCPTR.{TCP11,TCP10} ignore writes and read as 1.
5387 if (arm_feature(env
, ARM_FEATURE_EL3
) && !arm_el_is_aa64(env
, 3) &&
5388 !arm_is_secure(env
) && !extract32(env
->cp15
.nsacr
, 10, 1)) {
5389 value
&= ~(0x3 << 10);
5390 value
|= env
->cp15
.cptr_el
[2] & (0x3 << 10);
5392 env
->cp15
.cptr_el
[2] = value
;
5395 static uint64_t cptr_el2_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
5398 * For A-profile AArch32 EL3, if NSACR.CP10
5399 * is 0 then HCPTR.{TCP11,TCP10} ignore writes and read as 1.
5401 uint64_t value
= env
->cp15
.cptr_el
[2];
5403 if (arm_feature(env
, ARM_FEATURE_EL3
) && !arm_el_is_aa64(env
, 3) &&
5404 !arm_is_secure(env
) && !extract32(env
->cp15
.nsacr
, 10, 1)) {
5410 static const ARMCPRegInfo el2_cp_reginfo
[] = {
5411 { .name
= "HCR_EL2", .state
= ARM_CP_STATE_AA64
,
5413 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 0,
5414 .access
= PL2_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.hcr_el2
),
5415 .writefn
= hcr_write
},
5416 { .name
= "HCR", .state
= ARM_CP_STATE_AA32
,
5417 .type
= ARM_CP_ALIAS
| ARM_CP_IO
,
5418 .cp
= 15, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 0,
5419 .access
= PL2_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.hcr_el2
),
5420 .writefn
= hcr_writelow
},
5421 { .name
= "HACR_EL2", .state
= ARM_CP_STATE_BOTH
,
5422 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 7,
5423 .access
= PL2_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
5424 { .name
= "ELR_EL2", .state
= ARM_CP_STATE_AA64
,
5425 .type
= ARM_CP_ALIAS
,
5426 .opc0
= 3, .opc1
= 4, .crn
= 4, .crm
= 0, .opc2
= 1,
5428 .fieldoffset
= offsetof(CPUARMState
, elr_el
[2]) },
5429 { .name
= "ESR_EL2", .state
= ARM_CP_STATE_BOTH
,
5430 .opc0
= 3, .opc1
= 4, .crn
= 5, .crm
= 2, .opc2
= 0,
5431 .access
= PL2_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.esr_el
[2]) },
5432 { .name
= "FAR_EL2", .state
= ARM_CP_STATE_BOTH
,
5433 .opc0
= 3, .opc1
= 4, .crn
= 6, .crm
= 0, .opc2
= 0,
5434 .access
= PL2_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.far_el
[2]) },
5435 { .name
= "HIFAR", .state
= ARM_CP_STATE_AA32
,
5436 .type
= ARM_CP_ALIAS
,
5437 .cp
= 15, .opc1
= 4, .crn
= 6, .crm
= 0, .opc2
= 2,
5439 .fieldoffset
= offsetofhigh32(CPUARMState
, cp15
.far_el
[2]) },
5440 { .name
= "SPSR_EL2", .state
= ARM_CP_STATE_AA64
,
5441 .type
= ARM_CP_ALIAS
,
5442 .opc0
= 3, .opc1
= 4, .crn
= 4, .crm
= 0, .opc2
= 0,
5444 .fieldoffset
= offsetof(CPUARMState
, banked_spsr
[BANK_HYP
]) },
5445 { .name
= "VBAR_EL2", .state
= ARM_CP_STATE_BOTH
,
5446 .opc0
= 3, .opc1
= 4, .crn
= 12, .crm
= 0, .opc2
= 0,
5447 .access
= PL2_RW
, .writefn
= vbar_write
,
5448 .fieldoffset
= offsetof(CPUARMState
, cp15
.vbar_el
[2]),
5450 { .name
= "SP_EL2", .state
= ARM_CP_STATE_AA64
,
5451 .opc0
= 3, .opc1
= 6, .crn
= 4, .crm
= 1, .opc2
= 0,
5452 .access
= PL3_RW
, .type
= ARM_CP_ALIAS
,
5453 .fieldoffset
= offsetof(CPUARMState
, sp_el
[2]) },
5454 { .name
= "CPTR_EL2", .state
= ARM_CP_STATE_BOTH
,
5455 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 2,
5456 .access
= PL2_RW
, .accessfn
= cptr_access
, .resetvalue
= 0,
5457 .fieldoffset
= offsetof(CPUARMState
, cp15
.cptr_el
[2]),
5458 .readfn
= cptr_el2_read
, .writefn
= cptr_el2_write
},
5459 { .name
= "MAIR_EL2", .state
= ARM_CP_STATE_BOTH
,
5460 .opc0
= 3, .opc1
= 4, .crn
= 10, .crm
= 2, .opc2
= 0,
5461 .access
= PL2_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.mair_el
[2]),
5463 { .name
= "HMAIR1", .state
= ARM_CP_STATE_AA32
,
5464 .cp
= 15, .opc1
= 4, .crn
= 10, .crm
= 2, .opc2
= 1,
5465 .access
= PL2_RW
, .type
= ARM_CP_ALIAS
,
5466 .fieldoffset
= offsetofhigh32(CPUARMState
, cp15
.mair_el
[2]) },
5467 { .name
= "AMAIR_EL2", .state
= ARM_CP_STATE_BOTH
,
5468 .opc0
= 3, .opc1
= 4, .crn
= 10, .crm
= 3, .opc2
= 0,
5469 .access
= PL2_RW
, .type
= ARM_CP_CONST
,
5471 /* HAMAIR1 is mapped to AMAIR_EL2[63:32] */
5472 { .name
= "HAMAIR1", .state
= ARM_CP_STATE_AA32
,
5473 .cp
= 15, .opc1
= 4, .crn
= 10, .crm
= 3, .opc2
= 1,
5474 .access
= PL2_RW
, .type
= ARM_CP_CONST
,
5476 { .name
= "AFSR0_EL2", .state
= ARM_CP_STATE_BOTH
,
5477 .opc0
= 3, .opc1
= 4, .crn
= 5, .crm
= 1, .opc2
= 0,
5478 .access
= PL2_RW
, .type
= ARM_CP_CONST
,
5480 { .name
= "AFSR1_EL2", .state
= ARM_CP_STATE_BOTH
,
5481 .opc0
= 3, .opc1
= 4, .crn
= 5, .crm
= 1, .opc2
= 1,
5482 .access
= PL2_RW
, .type
= ARM_CP_CONST
,
5484 { .name
= "TCR_EL2", .state
= ARM_CP_STATE_BOTH
,
5485 .opc0
= 3, .opc1
= 4, .crn
= 2, .crm
= 0, .opc2
= 2,
5486 .access
= PL2_RW
, .writefn
= vmsa_tcr_el12_write
,
5487 /* no .raw_writefn or .resetfn needed as we never use mask/base_mask */
5488 .fieldoffset
= offsetof(CPUARMState
, cp15
.tcr_el
[2]) },
5489 { .name
= "VTCR", .state
= ARM_CP_STATE_AA32
,
5490 .cp
= 15, .opc1
= 4, .crn
= 2, .crm
= 1, .opc2
= 2,
5491 .type
= ARM_CP_ALIAS
,
5492 .access
= PL2_RW
, .accessfn
= access_el3_aa32ns
,
5493 .fieldoffset
= offsetof(CPUARMState
, cp15
.vtcr_el2
) },
5494 { .name
= "VTCR_EL2", .state
= ARM_CP_STATE_AA64
,
5495 .opc0
= 3, .opc1
= 4, .crn
= 2, .crm
= 1, .opc2
= 2,
5497 /* no .writefn needed as this can't cause an ASID change;
5498 * no .raw_writefn or .resetfn needed as we never use mask/base_mask
5500 .fieldoffset
= offsetof(CPUARMState
, cp15
.vtcr_el2
) },
5501 { .name
= "VTTBR", .state
= ARM_CP_STATE_AA32
,
5502 .cp
= 15, .opc1
= 6, .crm
= 2,
5503 .type
= ARM_CP_64BIT
| ARM_CP_ALIAS
,
5504 .access
= PL2_RW
, .accessfn
= access_el3_aa32ns
,
5505 .fieldoffset
= offsetof(CPUARMState
, cp15
.vttbr_el2
),
5506 .writefn
= vttbr_write
},
5507 { .name
= "VTTBR_EL2", .state
= ARM_CP_STATE_AA64
,
5508 .opc0
= 3, .opc1
= 4, .crn
= 2, .crm
= 1, .opc2
= 0,
5509 .access
= PL2_RW
, .writefn
= vttbr_write
,
5510 .fieldoffset
= offsetof(CPUARMState
, cp15
.vttbr_el2
) },
5511 { .name
= "SCTLR_EL2", .state
= ARM_CP_STATE_BOTH
,
5512 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 0, .opc2
= 0,
5513 .access
= PL2_RW
, .raw_writefn
= raw_write
, .writefn
= sctlr_write
,
5514 .fieldoffset
= offsetof(CPUARMState
, cp15
.sctlr_el
[2]) },
5515 { .name
= "TPIDR_EL2", .state
= ARM_CP_STATE_BOTH
,
5516 .opc0
= 3, .opc1
= 4, .crn
= 13, .crm
= 0, .opc2
= 2,
5517 .access
= PL2_RW
, .resetvalue
= 0,
5518 .fieldoffset
= offsetof(CPUARMState
, cp15
.tpidr_el
[2]) },
5519 { .name
= "TTBR0_EL2", .state
= ARM_CP_STATE_AA64
,
5520 .opc0
= 3, .opc1
= 4, .crn
= 2, .crm
= 0, .opc2
= 0,
5521 .access
= PL2_RW
, .resetvalue
= 0, .writefn
= vmsa_tcr_ttbr_el2_write
,
5522 .fieldoffset
= offsetof(CPUARMState
, cp15
.ttbr0_el
[2]) },
5523 { .name
= "HTTBR", .cp
= 15, .opc1
= 4, .crm
= 2,
5524 .access
= PL2_RW
, .type
= ARM_CP_64BIT
| ARM_CP_ALIAS
,
5525 .fieldoffset
= offsetof(CPUARMState
, cp15
.ttbr0_el
[2]) },
5526 { .name
= "TLBIALLNSNH",
5527 .cp
= 15, .opc1
= 4, .crn
= 8, .crm
= 7, .opc2
= 4,
5528 .type
= ARM_CP_NO_RAW
, .access
= PL2_W
,
5529 .writefn
= tlbiall_nsnh_write
},
5530 { .name
= "TLBIALLNSNHIS",
5531 .cp
= 15, .opc1
= 4, .crn
= 8, .crm
= 3, .opc2
= 4,
5532 .type
= ARM_CP_NO_RAW
, .access
= PL2_W
,
5533 .writefn
= tlbiall_nsnh_is_write
},
5534 { .name
= "TLBIALLH", .cp
= 15, .opc1
= 4, .crn
= 8, .crm
= 7, .opc2
= 0,
5535 .type
= ARM_CP_NO_RAW
, .access
= PL2_W
,
5536 .writefn
= tlbiall_hyp_write
},
5537 { .name
= "TLBIALLHIS", .cp
= 15, .opc1
= 4, .crn
= 8, .crm
= 3, .opc2
= 0,
5538 .type
= ARM_CP_NO_RAW
, .access
= PL2_W
,
5539 .writefn
= tlbiall_hyp_is_write
},
5540 { .name
= "TLBIMVAH", .cp
= 15, .opc1
= 4, .crn
= 8, .crm
= 7, .opc2
= 1,
5541 .type
= ARM_CP_NO_RAW
, .access
= PL2_W
,
5542 .writefn
= tlbimva_hyp_write
},
5543 { .name
= "TLBIMVAHIS", .cp
= 15, .opc1
= 4, .crn
= 8, .crm
= 3, .opc2
= 1,
5544 .type
= ARM_CP_NO_RAW
, .access
= PL2_W
,
5545 .writefn
= tlbimva_hyp_is_write
},
5546 { .name
= "TLBI_ALLE2", .state
= ARM_CP_STATE_AA64
,
5547 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 7, .opc2
= 0,
5548 .type
= ARM_CP_NO_RAW
, .access
= PL2_W
,
5549 .writefn
= tlbi_aa64_alle2_write
},
5550 { .name
= "TLBI_VAE2", .state
= ARM_CP_STATE_AA64
,
5551 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 7, .opc2
= 1,
5552 .type
= ARM_CP_NO_RAW
, .access
= PL2_W
,
5553 .writefn
= tlbi_aa64_vae2_write
},
5554 { .name
= "TLBI_VALE2", .state
= ARM_CP_STATE_AA64
,
5555 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 7, .opc2
= 5,
5556 .access
= PL2_W
, .type
= ARM_CP_NO_RAW
,
5557 .writefn
= tlbi_aa64_vae2_write
},
5558 { .name
= "TLBI_ALLE2IS", .state
= ARM_CP_STATE_AA64
,
5559 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 3, .opc2
= 0,
5560 .access
= PL2_W
, .type
= ARM_CP_NO_RAW
,
5561 .writefn
= tlbi_aa64_alle2is_write
},
5562 { .name
= "TLBI_VAE2IS", .state
= ARM_CP_STATE_AA64
,
5563 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 3, .opc2
= 1,
5564 .type
= ARM_CP_NO_RAW
, .access
= PL2_W
,
5565 .writefn
= tlbi_aa64_vae2is_write
},
5566 { .name
= "TLBI_VALE2IS", .state
= ARM_CP_STATE_AA64
,
5567 .opc0
= 1, .opc1
= 4, .crn
= 8, .crm
= 3, .opc2
= 5,
5568 .access
= PL2_W
, .type
= ARM_CP_NO_RAW
,
5569 .writefn
= tlbi_aa64_vae2is_write
},
5570 #ifndef CONFIG_USER_ONLY
5571 /* Unlike the other EL2-related AT operations, these must
5572 * UNDEF from EL3 if EL2 is not implemented, which is why we
5573 * define them here rather than with the rest of the AT ops.
5575 { .name
= "AT_S1E2R", .state
= ARM_CP_STATE_AA64
,
5576 .opc0
= 1, .opc1
= 4, .crn
= 7, .crm
= 8, .opc2
= 0,
5577 .access
= PL2_W
, .accessfn
= at_s1e2_access
,
5578 .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
, .writefn
= ats_write64
},
5579 { .name
= "AT_S1E2W", .state
= ARM_CP_STATE_AA64
,
5580 .opc0
= 1, .opc1
= 4, .crn
= 7, .crm
= 8, .opc2
= 1,
5581 .access
= PL2_W
, .accessfn
= at_s1e2_access
,
5582 .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
, .writefn
= ats_write64
},
5583 /* The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE
5584 * if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3
5585 * with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose
5586 * to behave as if SCR.NS was 1.
5588 { .name
= "ATS1HR", .cp
= 15, .opc1
= 4, .crn
= 7, .crm
= 8, .opc2
= 0,
5590 .writefn
= ats1h_write
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
},
5591 { .name
= "ATS1HW", .cp
= 15, .opc1
= 4, .crn
= 7, .crm
= 8, .opc2
= 1,
5593 .writefn
= ats1h_write
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
},
5594 { .name
= "CNTHCTL_EL2", .state
= ARM_CP_STATE_BOTH
,
5595 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 1, .opc2
= 0,
5596 /* ARMv7 requires bit 0 and 1 to reset to 1. ARMv8 defines the
5597 * reset values as IMPDEF. We choose to reset to 3 to comply with
5598 * both ARMv7 and ARMv8.
5600 .access
= PL2_RW
, .resetvalue
= 3,
5601 .fieldoffset
= offsetof(CPUARMState
, cp15
.cnthctl_el2
) },
5602 { .name
= "CNTVOFF_EL2", .state
= ARM_CP_STATE_AA64
,
5603 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 0, .opc2
= 3,
5604 .access
= PL2_RW
, .type
= ARM_CP_IO
, .resetvalue
= 0,
5605 .writefn
= gt_cntvoff_write
,
5606 .fieldoffset
= offsetof(CPUARMState
, cp15
.cntvoff_el2
) },
5607 { .name
= "CNTVOFF", .cp
= 15, .opc1
= 4, .crm
= 14,
5608 .access
= PL2_RW
, .type
= ARM_CP_64BIT
| ARM_CP_ALIAS
| ARM_CP_IO
,
5609 .writefn
= gt_cntvoff_write
,
5610 .fieldoffset
= offsetof(CPUARMState
, cp15
.cntvoff_el2
) },
5611 { .name
= "CNTHP_CVAL_EL2", .state
= ARM_CP_STATE_AA64
,
5612 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 2, .opc2
= 2,
5613 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_HYP
].cval
),
5614 .type
= ARM_CP_IO
, .access
= PL2_RW
,
5615 .writefn
= gt_hyp_cval_write
, .raw_writefn
= raw_write
},
5616 { .name
= "CNTHP_CVAL", .cp
= 15, .opc1
= 6, .crm
= 14,
5617 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_HYP
].cval
),
5618 .access
= PL2_RW
, .type
= ARM_CP_64BIT
| ARM_CP_IO
,
5619 .writefn
= gt_hyp_cval_write
, .raw_writefn
= raw_write
},
5620 { .name
= "CNTHP_TVAL_EL2", .state
= ARM_CP_STATE_BOTH
,
5621 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 2, .opc2
= 0,
5622 .type
= ARM_CP_NO_RAW
| ARM_CP_IO
, .access
= PL2_RW
,
5623 .resetfn
= gt_hyp_timer_reset
,
5624 .readfn
= gt_hyp_tval_read
, .writefn
= gt_hyp_tval_write
},
5625 { .name
= "CNTHP_CTL_EL2", .state
= ARM_CP_STATE_BOTH
,
5627 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 2, .opc2
= 1,
5629 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_HYP
].ctl
),
5631 .writefn
= gt_hyp_ctl_write
, .raw_writefn
= raw_write
},
5633 /* The only field of MDCR_EL2 that has a defined architectural reset value
5634 * is MDCR_EL2.HPMN which should reset to the value of PMCR_EL0.N; but we
5635 * don't implement any PMU event counters, so using zero as a reset
5636 * value for MDCR_EL2 is okay
5638 { .name
= "MDCR_EL2", .state
= ARM_CP_STATE_BOTH
,
5639 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 1,
5640 .access
= PL2_RW
, .resetvalue
= 0,
5641 .fieldoffset
= offsetof(CPUARMState
, cp15
.mdcr_el2
), },
5642 { .name
= "HPFAR", .state
= ARM_CP_STATE_AA32
,
5643 .cp
= 15, .opc1
= 4, .crn
= 6, .crm
= 0, .opc2
= 4,
5644 .access
= PL2_RW
, .accessfn
= access_el3_aa32ns
,
5645 .fieldoffset
= offsetof(CPUARMState
, cp15
.hpfar_el2
) },
5646 { .name
= "HPFAR_EL2", .state
= ARM_CP_STATE_AA64
,
5647 .opc0
= 3, .opc1
= 4, .crn
= 6, .crm
= 0, .opc2
= 4,
5649 .fieldoffset
= offsetof(CPUARMState
, cp15
.hpfar_el2
) },
5650 { .name
= "HSTR_EL2", .state
= ARM_CP_STATE_BOTH
,
5651 .cp
= 15, .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 3,
5653 .fieldoffset
= offsetof(CPUARMState
, cp15
.hstr_el2
) },
5657 static const ARMCPRegInfo el2_v8_cp_reginfo
[] = {
5658 { .name
= "HCR2", .state
= ARM_CP_STATE_AA32
,
5659 .type
= ARM_CP_ALIAS
| ARM_CP_IO
,
5660 .cp
= 15, .opc1
= 4, .crn
= 1, .crm
= 1, .opc2
= 4,
5662 .fieldoffset
= offsetofhigh32(CPUARMState
, cp15
.hcr_el2
),
5663 .writefn
= hcr_writehigh
},
5667 static CPAccessResult
nsacr_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
5670 /* The NSACR is RW at EL3, and RO for NS EL1 and NS EL2.
5671 * At Secure EL1 it traps to EL3.
5673 if (arm_current_el(env
) == 3) {
5674 return CP_ACCESS_OK
;
5676 if (arm_is_secure_below_el3(env
)) {
5677 return CP_ACCESS_TRAP_EL3
;
5679 /* Accesses from EL1 NS and EL2 NS are UNDEF for write but allow reads. */
5681 return CP_ACCESS_OK
;
5683 return CP_ACCESS_TRAP_UNCATEGORIZED
;
5686 static const ARMCPRegInfo el3_cp_reginfo
[] = {
5687 { .name
= "SCR_EL3", .state
= ARM_CP_STATE_AA64
,
5688 .opc0
= 3, .opc1
= 6, .crn
= 1, .crm
= 1, .opc2
= 0,
5689 .access
= PL3_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.scr_el3
),
5690 .resetvalue
= 0, .writefn
= scr_write
},
5691 { .name
= "SCR", .type
= ARM_CP_ALIAS
| ARM_CP_NEWEL
,
5692 .cp
= 15, .opc1
= 0, .crn
= 1, .crm
= 1, .opc2
= 0,
5693 .access
= PL1_RW
, .accessfn
= access_trap_aa32s_el1
,
5694 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.scr_el3
),
5695 .writefn
= scr_write
},
5696 { .name
= "SDER32_EL3", .state
= ARM_CP_STATE_AA64
,
5697 .opc0
= 3, .opc1
= 6, .crn
= 1, .crm
= 1, .opc2
= 1,
5698 .access
= PL3_RW
, .resetvalue
= 0,
5699 .fieldoffset
= offsetof(CPUARMState
, cp15
.sder
) },
5701 .cp
= 15, .opc1
= 0, .crn
= 1, .crm
= 1, .opc2
= 1,
5702 .access
= PL3_RW
, .resetvalue
= 0,
5703 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.sder
) },
5704 { .name
= "MVBAR", .cp
= 15, .opc1
= 0, .crn
= 12, .crm
= 0, .opc2
= 1,
5705 .access
= PL1_RW
, .accessfn
= access_trap_aa32s_el1
,
5706 .writefn
= vbar_write
, .resetvalue
= 0,
5707 .fieldoffset
= offsetof(CPUARMState
, cp15
.mvbar
) },
5708 { .name
= "TTBR0_EL3", .state
= ARM_CP_STATE_AA64
,
5709 .opc0
= 3, .opc1
= 6, .crn
= 2, .crm
= 0, .opc2
= 0,
5710 .access
= PL3_RW
, .resetvalue
= 0,
5711 .fieldoffset
= offsetof(CPUARMState
, cp15
.ttbr0_el
[3]) },
5712 { .name
= "TCR_EL3", .state
= ARM_CP_STATE_AA64
,
5713 .opc0
= 3, .opc1
= 6, .crn
= 2, .crm
= 0, .opc2
= 2,
5715 /* no .writefn needed as this can't cause an ASID change;
5716 * we must provide a .raw_writefn and .resetfn because we handle
5717 * reset and migration for the AArch32 TTBCR(S), which might be
5718 * using mask and base_mask.
5720 .resetfn
= vmsa_ttbcr_reset
, .raw_writefn
= vmsa_ttbcr_raw_write
,
5721 .fieldoffset
= offsetof(CPUARMState
, cp15
.tcr_el
[3]) },
5722 { .name
= "ELR_EL3", .state
= ARM_CP_STATE_AA64
,
5723 .type
= ARM_CP_ALIAS
,
5724 .opc0
= 3, .opc1
= 6, .crn
= 4, .crm
= 0, .opc2
= 1,
5726 .fieldoffset
= offsetof(CPUARMState
, elr_el
[3]) },
5727 { .name
= "ESR_EL3", .state
= ARM_CP_STATE_AA64
,
5728 .opc0
= 3, .opc1
= 6, .crn
= 5, .crm
= 2, .opc2
= 0,
5729 .access
= PL3_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.esr_el
[3]) },
5730 { .name
= "FAR_EL3", .state
= ARM_CP_STATE_AA64
,
5731 .opc0
= 3, .opc1
= 6, .crn
= 6, .crm
= 0, .opc2
= 0,
5732 .access
= PL3_RW
, .fieldoffset
= offsetof(CPUARMState
, cp15
.far_el
[3]) },
5733 { .name
= "SPSR_EL3", .state
= ARM_CP_STATE_AA64
,
5734 .type
= ARM_CP_ALIAS
,
5735 .opc0
= 3, .opc1
= 6, .crn
= 4, .crm
= 0, .opc2
= 0,
5737 .fieldoffset
= offsetof(CPUARMState
, banked_spsr
[BANK_MON
]) },
5738 { .name
= "VBAR_EL3", .state
= ARM_CP_STATE_AA64
,
5739 .opc0
= 3, .opc1
= 6, .crn
= 12, .crm
= 0, .opc2
= 0,
5740 .access
= PL3_RW
, .writefn
= vbar_write
,
5741 .fieldoffset
= offsetof(CPUARMState
, cp15
.vbar_el
[3]),
5743 { .name
= "CPTR_EL3", .state
= ARM_CP_STATE_AA64
,
5744 .opc0
= 3, .opc1
= 6, .crn
= 1, .crm
= 1, .opc2
= 2,
5745 .access
= PL3_RW
, .accessfn
= cptr_access
, .resetvalue
= 0,
5746 .fieldoffset
= offsetof(CPUARMState
, cp15
.cptr_el
[3]) },
5747 { .name
= "TPIDR_EL3", .state
= ARM_CP_STATE_AA64
,
5748 .opc0
= 3, .opc1
= 6, .crn
= 13, .crm
= 0, .opc2
= 2,
5749 .access
= PL3_RW
, .resetvalue
= 0,
5750 .fieldoffset
= offsetof(CPUARMState
, cp15
.tpidr_el
[3]) },
5751 { .name
= "AMAIR_EL3", .state
= ARM_CP_STATE_AA64
,
5752 .opc0
= 3, .opc1
= 6, .crn
= 10, .crm
= 3, .opc2
= 0,
5753 .access
= PL3_RW
, .type
= ARM_CP_CONST
,
5755 { .name
= "AFSR0_EL3", .state
= ARM_CP_STATE_BOTH
,
5756 .opc0
= 3, .opc1
= 6, .crn
= 5, .crm
= 1, .opc2
= 0,
5757 .access
= PL3_RW
, .type
= ARM_CP_CONST
,
5759 { .name
= "AFSR1_EL3", .state
= ARM_CP_STATE_BOTH
,
5760 .opc0
= 3, .opc1
= 6, .crn
= 5, .crm
= 1, .opc2
= 1,
5761 .access
= PL3_RW
, .type
= ARM_CP_CONST
,
5763 { .name
= "TLBI_ALLE3IS", .state
= ARM_CP_STATE_AA64
,
5764 .opc0
= 1, .opc1
= 6, .crn
= 8, .crm
= 3, .opc2
= 0,
5765 .access
= PL3_W
, .type
= ARM_CP_NO_RAW
,
5766 .writefn
= tlbi_aa64_alle3is_write
},
5767 { .name
= "TLBI_VAE3IS", .state
= ARM_CP_STATE_AA64
,
5768 .opc0
= 1, .opc1
= 6, .crn
= 8, .crm
= 3, .opc2
= 1,
5769 .access
= PL3_W
, .type
= ARM_CP_NO_RAW
,
5770 .writefn
= tlbi_aa64_vae3is_write
},
5771 { .name
= "TLBI_VALE3IS", .state
= ARM_CP_STATE_AA64
,
5772 .opc0
= 1, .opc1
= 6, .crn
= 8, .crm
= 3, .opc2
= 5,
5773 .access
= PL3_W
, .type
= ARM_CP_NO_RAW
,
5774 .writefn
= tlbi_aa64_vae3is_write
},
5775 { .name
= "TLBI_ALLE3", .state
= ARM_CP_STATE_AA64
,
5776 .opc0
= 1, .opc1
= 6, .crn
= 8, .crm
= 7, .opc2
= 0,
5777 .access
= PL3_W
, .type
= ARM_CP_NO_RAW
,
5778 .writefn
= tlbi_aa64_alle3_write
},
5779 { .name
= "TLBI_VAE3", .state
= ARM_CP_STATE_AA64
,
5780 .opc0
= 1, .opc1
= 6, .crn
= 8, .crm
= 7, .opc2
= 1,
5781 .access
= PL3_W
, .type
= ARM_CP_NO_RAW
,
5782 .writefn
= tlbi_aa64_vae3_write
},
5783 { .name
= "TLBI_VALE3", .state
= ARM_CP_STATE_AA64
,
5784 .opc0
= 1, .opc1
= 6, .crn
= 8, .crm
= 7, .opc2
= 5,
5785 .access
= PL3_W
, .type
= ARM_CP_NO_RAW
,
5786 .writefn
= tlbi_aa64_vae3_write
},
5790 #ifndef CONFIG_USER_ONLY
5791 /* Test if system register redirection is to occur in the current state. */
5792 static bool redirect_for_e2h(CPUARMState
*env
)
5794 return arm_current_el(env
) == 2 && (arm_hcr_el2_eff(env
) & HCR_E2H
);
5797 static uint64_t el2_e2h_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
5801 if (redirect_for_e2h(env
)) {
5802 /* Switch to the saved EL2 version of the register. */
5804 readfn
= ri
->readfn
;
5806 readfn
= ri
->orig_readfn
;
5808 if (readfn
== NULL
) {
5811 return readfn(env
, ri
);
5814 static void el2_e2h_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
5819 if (redirect_for_e2h(env
)) {
5820 /* Switch to the saved EL2 version of the register. */
5822 writefn
= ri
->writefn
;
5824 writefn
= ri
->orig_writefn
;
5826 if (writefn
== NULL
) {
5827 writefn
= raw_write
;
5829 writefn(env
, ri
, value
);
5832 static void define_arm_vh_e2h_redirects_aliases(ARMCPU
*cpu
)
5835 uint32_t src_key
, dst_key
, new_key
;
5836 const char *src_name
, *dst_name
, *new_name
;
5837 bool (*feature
)(const ARMISARegisters
*id
);
5840 #define K(op0, op1, crn, crm, op2) \
5841 ENCODE_AA64_CP_REG(CP_REG_ARM64_SYSREG_CP, crn, crm, op0, op1, op2)
5843 static const struct E2HAlias aliases
[] = {
5844 { K(3, 0, 1, 0, 0), K(3, 4, 1, 0, 0), K(3, 5, 1, 0, 0),
5845 "SCTLR", "SCTLR_EL2", "SCTLR_EL12" },
5846 { K(3, 0, 1, 0, 2), K(3, 4, 1, 1, 2), K(3, 5, 1, 0, 2),
5847 "CPACR", "CPTR_EL2", "CPACR_EL12" },
5848 { K(3, 0, 2, 0, 0), K(3, 4, 2, 0, 0), K(3, 5, 2, 0, 0),
5849 "TTBR0_EL1", "TTBR0_EL2", "TTBR0_EL12" },
5850 { K(3, 0, 2, 0, 1), K(3, 4, 2, 0, 1), K(3, 5, 2, 0, 1),
5851 "TTBR1_EL1", "TTBR1_EL2", "TTBR1_EL12" },
5852 { K(3, 0, 2, 0, 2), K(3, 4, 2, 0, 2), K(3, 5, 2, 0, 2),
5853 "TCR_EL1", "TCR_EL2", "TCR_EL12" },
5854 { K(3, 0, 4, 0, 0), K(3, 4, 4, 0, 0), K(3, 5, 4, 0, 0),
5855 "SPSR_EL1", "SPSR_EL2", "SPSR_EL12" },
5856 { K(3, 0, 4, 0, 1), K(3, 4, 4, 0, 1), K(3, 5, 4, 0, 1),
5857 "ELR_EL1", "ELR_EL2", "ELR_EL12" },
5858 { K(3, 0, 5, 1, 0), K(3, 4, 5, 1, 0), K(3, 5, 5, 1, 0),
5859 "AFSR0_EL1", "AFSR0_EL2", "AFSR0_EL12" },
5860 { K(3, 0, 5, 1, 1), K(3, 4, 5, 1, 1), K(3, 5, 5, 1, 1),
5861 "AFSR1_EL1", "AFSR1_EL2", "AFSR1_EL12" },
5862 { K(3, 0, 5, 2, 0), K(3, 4, 5, 2, 0), K(3, 5, 5, 2, 0),
5863 "ESR_EL1", "ESR_EL2", "ESR_EL12" },
5864 { K(3, 0, 6, 0, 0), K(3, 4, 6, 0, 0), K(3, 5, 6, 0, 0),
5865 "FAR_EL1", "FAR_EL2", "FAR_EL12" },
5866 { K(3, 0, 10, 2, 0), K(3, 4, 10, 2, 0), K(3, 5, 10, 2, 0),
5867 "MAIR_EL1", "MAIR_EL2", "MAIR_EL12" },
5868 { K(3, 0, 10, 3, 0), K(3, 4, 10, 3, 0), K(3, 5, 10, 3, 0),
5869 "AMAIR0", "AMAIR_EL2", "AMAIR_EL12" },
5870 { K(3, 0, 12, 0, 0), K(3, 4, 12, 0, 0), K(3, 5, 12, 0, 0),
5871 "VBAR", "VBAR_EL2", "VBAR_EL12" },
5872 { K(3, 0, 13, 0, 1), K(3, 4, 13, 0, 1), K(3, 5, 13, 0, 1),
5873 "CONTEXTIDR_EL1", "CONTEXTIDR_EL2", "CONTEXTIDR_EL12" },
5874 { K(3, 0, 14, 1, 0), K(3, 4, 14, 1, 0), K(3, 5, 14, 1, 0),
5875 "CNTKCTL", "CNTHCTL_EL2", "CNTKCTL_EL12" },
5878 * Note that redirection of ZCR is mentioned in the description
5879 * of ZCR_EL2, and aliasing in the description of ZCR_EL1, but
5880 * not in the summary table.
5882 { K(3, 0, 1, 2, 0), K(3, 4, 1, 2, 0), K(3, 5, 1, 2, 0),
5883 "ZCR_EL1", "ZCR_EL2", "ZCR_EL12", isar_feature_aa64_sve
},
5885 { K(3, 0, 5, 6, 0), K(3, 4, 5, 6, 0), K(3, 5, 5, 6, 0),
5886 "TFSR_EL1", "TFSR_EL2", "TFSR_EL12", isar_feature_aa64_mte
},
5888 /* TODO: ARMv8.2-SPE -- PMSCR_EL2 */
5889 /* TODO: ARMv8.4-Trace -- TRFCR_EL2 */
5895 for (i
= 0; i
< ARRAY_SIZE(aliases
); i
++) {
5896 const struct E2HAlias
*a
= &aliases
[i
];
5897 ARMCPRegInfo
*src_reg
, *dst_reg
;
5899 if (a
->feature
&& !a
->feature(&cpu
->isar
)) {
5903 src_reg
= g_hash_table_lookup(cpu
->cp_regs
, &a
->src_key
);
5904 dst_reg
= g_hash_table_lookup(cpu
->cp_regs
, &a
->dst_key
);
5905 g_assert(src_reg
!= NULL
);
5906 g_assert(dst_reg
!= NULL
);
5908 /* Cross-compare names to detect typos in the keys. */
5909 g_assert(strcmp(src_reg
->name
, a
->src_name
) == 0);
5910 g_assert(strcmp(dst_reg
->name
, a
->dst_name
) == 0);
5912 /* None of the core system registers use opaque; we will. */
5913 g_assert(src_reg
->opaque
== NULL
);
5915 /* Create alias before redirection so we dup the right data. */
5917 ARMCPRegInfo
*new_reg
= g_memdup(src_reg
, sizeof(ARMCPRegInfo
));
5918 uint32_t *new_key
= g_memdup(&a
->new_key
, sizeof(uint32_t));
5921 new_reg
->name
= a
->new_name
;
5922 new_reg
->type
|= ARM_CP_ALIAS
;
5923 /* Remove PL1/PL0 access, leaving PL2/PL3 R/W in place. */
5924 new_reg
->access
&= PL2_RW
| PL3_RW
;
5926 ok
= g_hash_table_insert(cpu
->cp_regs
, new_key
, new_reg
);
5930 src_reg
->opaque
= dst_reg
;
5931 src_reg
->orig_readfn
= src_reg
->readfn
?: raw_read
;
5932 src_reg
->orig_writefn
= src_reg
->writefn
?: raw_write
;
5933 if (!src_reg
->raw_readfn
) {
5934 src_reg
->raw_readfn
= raw_read
;
5936 if (!src_reg
->raw_writefn
) {
5937 src_reg
->raw_writefn
= raw_write
;
5939 src_reg
->readfn
= el2_e2h_read
;
5940 src_reg
->writefn
= el2_e2h_write
;
5945 static CPAccessResult
ctr_el0_access(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
5948 int cur_el
= arm_current_el(env
);
5951 uint64_t hcr
= arm_hcr_el2_eff(env
);
5954 if ((hcr
& (HCR_E2H
| HCR_TGE
)) == (HCR_E2H
| HCR_TGE
)) {
5955 if (!(env
->cp15
.sctlr_el
[2] & SCTLR_UCT
)) {
5956 return CP_ACCESS_TRAP_EL2
;
5959 if (!(env
->cp15
.sctlr_el
[1] & SCTLR_UCT
)) {
5960 return CP_ACCESS_TRAP
;
5962 if (hcr
& HCR_TID2
) {
5963 return CP_ACCESS_TRAP_EL2
;
5966 } else if (hcr
& HCR_TID2
) {
5967 return CP_ACCESS_TRAP_EL2
;
5971 if (arm_current_el(env
) < 2 && arm_hcr_el2_eff(env
) & HCR_TID2
) {
5972 return CP_ACCESS_TRAP_EL2
;
5975 return CP_ACCESS_OK
;
5978 static void oslar_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
5981 /* Writes to OSLAR_EL1 may update the OS lock status, which can be
5982 * read via a bit in OSLSR_EL1.
5986 if (ri
->state
== ARM_CP_STATE_AA32
) {
5987 oslock
= (value
== 0xC5ACCE55);
5992 env
->cp15
.oslsr_el1
= deposit32(env
->cp15
.oslsr_el1
, 1, 1, oslock
);
5995 static const ARMCPRegInfo debug_cp_reginfo
[] = {
5996 /* DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped
5997 * debug components. The AArch64 version of DBGDRAR is named MDRAR_EL1;
5998 * unlike DBGDRAR it is never accessible from EL0.
5999 * DBGDSAR is deprecated and must RAZ from v8 anyway, so it has no AArch64
6002 { .name
= "DBGDRAR", .cp
= 14, .crn
= 1, .crm
= 0, .opc1
= 0, .opc2
= 0,
6003 .access
= PL0_R
, .accessfn
= access_tdra
,
6004 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
6005 { .name
= "MDRAR_EL1", .state
= ARM_CP_STATE_AA64
,
6006 .opc0
= 2, .opc1
= 0, .crn
= 1, .crm
= 0, .opc2
= 0,
6007 .access
= PL1_R
, .accessfn
= access_tdra
,
6008 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
6009 { .name
= "DBGDSAR", .cp
= 14, .crn
= 2, .crm
= 0, .opc1
= 0, .opc2
= 0,
6010 .access
= PL0_R
, .accessfn
= access_tdra
,
6011 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
6012 /* Monitor debug system control register; the 32-bit alias is DBGDSCRext. */
6013 { .name
= "MDSCR_EL1", .state
= ARM_CP_STATE_BOTH
,
6014 .cp
= 14, .opc0
= 2, .opc1
= 0, .crn
= 0, .crm
= 2, .opc2
= 2,
6015 .access
= PL1_RW
, .accessfn
= access_tda
,
6016 .fieldoffset
= offsetof(CPUARMState
, cp15
.mdscr_el1
),
6018 /* MDCCSR_EL0, aka DBGDSCRint. This is a read-only mirror of MDSCR_EL1.
6019 * We don't implement the configurable EL0 access.
6021 { .name
= "MDCCSR_EL0", .state
= ARM_CP_STATE_BOTH
,
6022 .cp
= 14, .opc0
= 2, .opc1
= 0, .crn
= 0, .crm
= 1, .opc2
= 0,
6023 .type
= ARM_CP_ALIAS
,
6024 .access
= PL1_R
, .accessfn
= access_tda
,
6025 .fieldoffset
= offsetof(CPUARMState
, cp15
.mdscr_el1
), },
6026 { .name
= "OSLAR_EL1", .state
= ARM_CP_STATE_BOTH
,
6027 .cp
= 14, .opc0
= 2, .opc1
= 0, .crn
= 1, .crm
= 0, .opc2
= 4,
6028 .access
= PL1_W
, .type
= ARM_CP_NO_RAW
,
6029 .accessfn
= access_tdosa
,
6030 .writefn
= oslar_write
},
6031 { .name
= "OSLSR_EL1", .state
= ARM_CP_STATE_BOTH
,
6032 .cp
= 14, .opc0
= 2, .opc1
= 0, .crn
= 1, .crm
= 1, .opc2
= 4,
6033 .access
= PL1_R
, .resetvalue
= 10,
6034 .accessfn
= access_tdosa
,
6035 .fieldoffset
= offsetof(CPUARMState
, cp15
.oslsr_el1
) },
6036 /* Dummy OSDLR_EL1: 32-bit Linux will read this */
6037 { .name
= "OSDLR_EL1", .state
= ARM_CP_STATE_BOTH
,
6038 .cp
= 14, .opc0
= 2, .opc1
= 0, .crn
= 1, .crm
= 3, .opc2
= 4,
6039 .access
= PL1_RW
, .accessfn
= access_tdosa
,
6040 .type
= ARM_CP_NOP
},
6041 /* Dummy DBGVCR: Linux wants to clear this on startup, but we don't
6042 * implement vector catch debug events yet.
6045 .cp
= 14, .opc1
= 0, .crn
= 0, .crm
= 7, .opc2
= 0,
6046 .access
= PL1_RW
, .accessfn
= access_tda
,
6047 .type
= ARM_CP_NOP
},
6048 /* Dummy DBGVCR32_EL2 (which is only for a 64-bit hypervisor
6049 * to save and restore a 32-bit guest's DBGVCR)
6051 { .name
= "DBGVCR32_EL2", .state
= ARM_CP_STATE_AA64
,
6052 .opc0
= 2, .opc1
= 4, .crn
= 0, .crm
= 7, .opc2
= 0,
6053 .access
= PL2_RW
, .accessfn
= access_tda
,
6054 .type
= ARM_CP_NOP
},
6055 /* Dummy MDCCINT_EL1, since we don't implement the Debug Communications
6056 * Channel but Linux may try to access this register. The 32-bit
6057 * alias is DBGDCCINT.
6059 { .name
= "MDCCINT_EL1", .state
= ARM_CP_STATE_BOTH
,
6060 .cp
= 14, .opc0
= 2, .opc1
= 0, .crn
= 0, .crm
= 2, .opc2
= 0,
6061 .access
= PL1_RW
, .accessfn
= access_tda
,
6062 .type
= ARM_CP_NOP
},
6066 static const ARMCPRegInfo debug_lpae_cp_reginfo
[] = {
6067 /* 64 bit access versions of the (dummy) debug registers */
6068 { .name
= "DBGDRAR", .cp
= 14, .crm
= 1, .opc1
= 0,
6069 .access
= PL0_R
, .type
= ARM_CP_CONST
|ARM_CP_64BIT
, .resetvalue
= 0 },
6070 { .name
= "DBGDSAR", .cp
= 14, .crm
= 2, .opc1
= 0,
6071 .access
= PL0_R
, .type
= ARM_CP_CONST
|ARM_CP_64BIT
, .resetvalue
= 0 },
6075 /* Return the exception level to which exceptions should be taken
6076 * via SVEAccessTrap. If an exception should be routed through
6077 * AArch64.AdvSIMDFPAccessTrap, return 0; fp_exception_el should
6078 * take care of raising that exception.
6079 * C.f. the ARM pseudocode function CheckSVEEnabled.
6081 int sve_exception_el(CPUARMState
*env
, int el
)
6083 #ifndef CONFIG_USER_ONLY
6084 uint64_t hcr_el2
= arm_hcr_el2_eff(env
);
6086 if (el
<= 1 && (hcr_el2
& (HCR_E2H
| HCR_TGE
)) != (HCR_E2H
| HCR_TGE
)) {
6087 bool disabled
= false;
6089 /* The CPACR.ZEN controls traps to EL1:
6090 * 0, 2 : trap EL0 and EL1 accesses
6091 * 1 : trap only EL0 accesses
6092 * 3 : trap no accesses
6094 if (!extract32(env
->cp15
.cpacr_el1
, 16, 1)) {
6096 } else if (!extract32(env
->cp15
.cpacr_el1
, 17, 1)) {
6101 return hcr_el2
& HCR_TGE
? 2 : 1;
6104 /* Check CPACR.FPEN. */
6105 if (!extract32(env
->cp15
.cpacr_el1
, 20, 1)) {
6107 } else if (!extract32(env
->cp15
.cpacr_el1
, 21, 1)) {
6115 /* CPTR_EL2. Since TZ and TFP are positive,
6116 * they will be zero when EL2 is not present.
6118 if (el
<= 2 && !arm_is_secure_below_el3(env
)) {
6119 if (env
->cp15
.cptr_el
[2] & CPTR_TZ
) {
6122 if (env
->cp15
.cptr_el
[2] & CPTR_TFP
) {
6127 /* CPTR_EL3. Since EZ is negative we must check for EL3. */
6128 if (arm_feature(env
, ARM_FEATURE_EL3
)
6129 && !(env
->cp15
.cptr_el
[3] & CPTR_EZ
)) {
6136 static uint32_t sve_zcr_get_valid_len(ARMCPU
*cpu
, uint32_t start_len
)
6140 end_len
= start_len
&= 0xf;
6141 if (!test_bit(start_len
, cpu
->sve_vq_map
)) {
6142 end_len
= find_last_bit(cpu
->sve_vq_map
, start_len
);
6143 assert(end_len
< start_len
);
6149 * Given that SVE is enabled, return the vector length for EL.
6151 uint32_t sve_zcr_len_for_el(CPUARMState
*env
, int el
)
6153 ARMCPU
*cpu
= env_archcpu(env
);
6154 uint32_t zcr_len
= cpu
->sve_max_vq
- 1;
6157 zcr_len
= MIN(zcr_len
, 0xf & (uint32_t)env
->vfp
.zcr_el
[1]);
6159 if (el
<= 2 && arm_feature(env
, ARM_FEATURE_EL2
)) {
6160 zcr_len
= MIN(zcr_len
, 0xf & (uint32_t)env
->vfp
.zcr_el
[2]);
6162 if (arm_feature(env
, ARM_FEATURE_EL3
)) {
6163 zcr_len
= MIN(zcr_len
, 0xf & (uint32_t)env
->vfp
.zcr_el
[3]);
6166 return sve_zcr_get_valid_len(cpu
, zcr_len
);
6169 static void zcr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
6172 int cur_el
= arm_current_el(env
);
6173 int old_len
= sve_zcr_len_for_el(env
, cur_el
);
6176 /* Bits other than [3:0] are RAZ/WI. */
6177 QEMU_BUILD_BUG_ON(ARM_MAX_VQ
> 16);
6178 raw_write(env
, ri
, value
& 0xf);
6181 * Because we arrived here, we know both FP and SVE are enabled;
6182 * otherwise we would have trapped access to the ZCR_ELn register.
6184 new_len
= sve_zcr_len_for_el(env
, cur_el
);
6185 if (new_len
< old_len
) {
6186 aarch64_sve_narrow_vq(env
, new_len
+ 1);
6190 static const ARMCPRegInfo zcr_el1_reginfo
= {
6191 .name
= "ZCR_EL1", .state
= ARM_CP_STATE_AA64
,
6192 .opc0
= 3, .opc1
= 0, .crn
= 1, .crm
= 2, .opc2
= 0,
6193 .access
= PL1_RW
, .type
= ARM_CP_SVE
,
6194 .fieldoffset
= offsetof(CPUARMState
, vfp
.zcr_el
[1]),
6195 .writefn
= zcr_write
, .raw_writefn
= raw_write
6198 static const ARMCPRegInfo zcr_el2_reginfo
= {
6199 .name
= "ZCR_EL2", .state
= ARM_CP_STATE_AA64
,
6200 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 2, .opc2
= 0,
6201 .access
= PL2_RW
, .type
= ARM_CP_SVE
,
6202 .fieldoffset
= offsetof(CPUARMState
, vfp
.zcr_el
[2]),
6203 .writefn
= zcr_write
, .raw_writefn
= raw_write
6206 static const ARMCPRegInfo zcr_no_el2_reginfo
= {
6207 .name
= "ZCR_EL2", .state
= ARM_CP_STATE_AA64
,
6208 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 2, .opc2
= 0,
6209 .access
= PL2_RW
, .type
= ARM_CP_SVE
,
6210 .readfn
= arm_cp_read_zero
, .writefn
= arm_cp_write_ignore
6213 static const ARMCPRegInfo zcr_el3_reginfo
= {
6214 .name
= "ZCR_EL3", .state
= ARM_CP_STATE_AA64
,
6215 .opc0
= 3, .opc1
= 6, .crn
= 1, .crm
= 2, .opc2
= 0,
6216 .access
= PL3_RW
, .type
= ARM_CP_SVE
,
6217 .fieldoffset
= offsetof(CPUARMState
, vfp
.zcr_el
[3]),
6218 .writefn
= zcr_write
, .raw_writefn
= raw_write
6221 void hw_watchpoint_update(ARMCPU
*cpu
, int n
)
6223 CPUARMState
*env
= &cpu
->env
;
6225 vaddr wvr
= env
->cp15
.dbgwvr
[n
];
6226 uint64_t wcr
= env
->cp15
.dbgwcr
[n
];
6228 int flags
= BP_CPU
| BP_STOP_BEFORE_ACCESS
;
6230 if (env
->cpu_watchpoint
[n
]) {
6231 cpu_watchpoint_remove_by_ref(CPU(cpu
), env
->cpu_watchpoint
[n
]);
6232 env
->cpu_watchpoint
[n
] = NULL
;
6235 if (!extract64(wcr
, 0, 1)) {
6236 /* E bit clear : watchpoint disabled */
6240 switch (extract64(wcr
, 3, 2)) {
6242 /* LSC 00 is reserved and must behave as if the wp is disabled */
6245 flags
|= BP_MEM_READ
;
6248 flags
|= BP_MEM_WRITE
;
6251 flags
|= BP_MEM_ACCESS
;
6255 /* Attempts to use both MASK and BAS fields simultaneously are
6256 * CONSTRAINED UNPREDICTABLE; we opt to ignore BAS in this case,
6257 * thus generating a watchpoint for every byte in the masked region.
6259 mask
= extract64(wcr
, 24, 4);
6260 if (mask
== 1 || mask
== 2) {
6261 /* Reserved values of MASK; we must act as if the mask value was
6262 * some non-reserved value, or as if the watchpoint were disabled.
6263 * We choose the latter.
6267 /* Watchpoint covers an aligned area up to 2GB in size */
6269 /* If masked bits in WVR are not zero it's CONSTRAINED UNPREDICTABLE
6270 * whether the watchpoint fires when the unmasked bits match; we opt
6271 * to generate the exceptions.
6275 /* Watchpoint covers bytes defined by the byte address select bits */
6276 int bas
= extract64(wcr
, 5, 8);
6279 if (extract64(wvr
, 2, 1)) {
6280 /* Deprecated case of an only 4-aligned address. BAS[7:4] are
6281 * ignored, and BAS[3:0] define which bytes to watch.
6287 /* This must act as if the watchpoint is disabled */
6291 /* The BAS bits are supposed to be programmed to indicate a contiguous
6292 * range of bytes. Otherwise it is CONSTRAINED UNPREDICTABLE whether
6293 * we fire for each byte in the word/doubleword addressed by the WVR.
6294 * We choose to ignore any non-zero bits after the first range of 1s.
6296 basstart
= ctz32(bas
);
6297 len
= cto32(bas
>> basstart
);
6301 cpu_watchpoint_insert(CPU(cpu
), wvr
, len
, flags
,
6302 &env
->cpu_watchpoint
[n
]);
6305 void hw_watchpoint_update_all(ARMCPU
*cpu
)
6308 CPUARMState
*env
= &cpu
->env
;
6310 /* Completely clear out existing QEMU watchpoints and our array, to
6311 * avoid possible stale entries following migration load.
6313 cpu_watchpoint_remove_all(CPU(cpu
), BP_CPU
);
6314 memset(env
->cpu_watchpoint
, 0, sizeof(env
->cpu_watchpoint
));
6316 for (i
= 0; i
< ARRAY_SIZE(cpu
->env
.cpu_watchpoint
); i
++) {
6317 hw_watchpoint_update(cpu
, i
);
6321 static void dbgwvr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
6324 ARMCPU
*cpu
= env_archcpu(env
);
6327 /* Bits [63:49] are hardwired to the value of bit [48]; that is, the
6328 * register reads and behaves as if values written are sign extended.
6329 * Bits [1:0] are RES0.
6331 value
= sextract64(value
, 0, 49) & ~3ULL;
6333 raw_write(env
, ri
, value
);
6334 hw_watchpoint_update(cpu
, i
);
6337 static void dbgwcr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
6340 ARMCPU
*cpu
= env_archcpu(env
);
6343 raw_write(env
, ri
, value
);
6344 hw_watchpoint_update(cpu
, i
);
6347 void hw_breakpoint_update(ARMCPU
*cpu
, int n
)
6349 CPUARMState
*env
= &cpu
->env
;
6350 uint64_t bvr
= env
->cp15
.dbgbvr
[n
];
6351 uint64_t bcr
= env
->cp15
.dbgbcr
[n
];
6356 if (env
->cpu_breakpoint
[n
]) {
6357 cpu_breakpoint_remove_by_ref(CPU(cpu
), env
->cpu_breakpoint
[n
]);
6358 env
->cpu_breakpoint
[n
] = NULL
;
6361 if (!extract64(bcr
, 0, 1)) {
6362 /* E bit clear : watchpoint disabled */
6366 bt
= extract64(bcr
, 20, 4);
6369 case 4: /* unlinked address mismatch (reserved if AArch64) */
6370 case 5: /* linked address mismatch (reserved if AArch64) */
6371 qemu_log_mask(LOG_UNIMP
,
6372 "arm: address mismatch breakpoint types not implemented\n");
6374 case 0: /* unlinked address match */
6375 case 1: /* linked address match */
6377 /* Bits [63:49] are hardwired to the value of bit [48]; that is,
6378 * we behave as if the register was sign extended. Bits [1:0] are
6379 * RES0. The BAS field is used to allow setting breakpoints on 16
6380 * bit wide instructions; it is CONSTRAINED UNPREDICTABLE whether
6381 * a bp will fire if the addresses covered by the bp and the addresses
6382 * covered by the insn overlap but the insn doesn't start at the
6383 * start of the bp address range. We choose to require the insn and
6384 * the bp to have the same address. The constraints on writing to
6385 * BAS enforced in dbgbcr_write mean we have only four cases:
6386 * 0b0000 => no breakpoint
6387 * 0b0011 => breakpoint on addr
6388 * 0b1100 => breakpoint on addr + 2
6389 * 0b1111 => breakpoint on addr
6390 * See also figure D2-3 in the v8 ARM ARM (DDI0487A.c).
6392 int bas
= extract64(bcr
, 5, 4);
6393 addr
= sextract64(bvr
, 0, 49) & ~3ULL;
6402 case 2: /* unlinked context ID match */
6403 case 8: /* unlinked VMID match (reserved if no EL2) */
6404 case 10: /* unlinked context ID and VMID match (reserved if no EL2) */
6405 qemu_log_mask(LOG_UNIMP
,
6406 "arm: unlinked context breakpoint types not implemented\n");
6408 case 9: /* linked VMID match (reserved if no EL2) */
6409 case 11: /* linked context ID and VMID match (reserved if no EL2) */
6410 case 3: /* linked context ID match */
6412 /* We must generate no events for Linked context matches (unless
6413 * they are linked to by some other bp/wp, which is handled in
6414 * updates for the linking bp/wp). We choose to also generate no events
6415 * for reserved values.
6420 cpu_breakpoint_insert(CPU(cpu
), addr
, flags
, &env
->cpu_breakpoint
[n
]);
6423 void hw_breakpoint_update_all(ARMCPU
*cpu
)
6426 CPUARMState
*env
= &cpu
->env
;
6428 /* Completely clear out existing QEMU breakpoints and our array, to
6429 * avoid possible stale entries following migration load.
6431 cpu_breakpoint_remove_all(CPU(cpu
), BP_CPU
);
6432 memset(env
->cpu_breakpoint
, 0, sizeof(env
->cpu_breakpoint
));
6434 for (i
= 0; i
< ARRAY_SIZE(cpu
->env
.cpu_breakpoint
); i
++) {
6435 hw_breakpoint_update(cpu
, i
);
6439 static void dbgbvr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
6442 ARMCPU
*cpu
= env_archcpu(env
);
6445 raw_write(env
, ri
, value
);
6446 hw_breakpoint_update(cpu
, i
);
6449 static void dbgbcr_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
6452 ARMCPU
*cpu
= env_archcpu(env
);
6455 /* BAS[3] is a read-only copy of BAS[2], and BAS[1] a read-only
6458 value
= deposit64(value
, 6, 1, extract64(value
, 5, 1));
6459 value
= deposit64(value
, 8, 1, extract64(value
, 7, 1));
6461 raw_write(env
, ri
, value
);
6462 hw_breakpoint_update(cpu
, i
);
6465 static void define_debug_regs(ARMCPU
*cpu
)
6467 /* Define v7 and v8 architectural debug registers.
6468 * These are just dummy implementations for now.
6471 int wrps
, brps
, ctx_cmps
;
6472 ARMCPRegInfo dbgdidr
= {
6473 .name
= "DBGDIDR", .cp
= 14, .crn
= 0, .crm
= 0, .opc1
= 0, .opc2
= 0,
6474 .access
= PL0_R
, .accessfn
= access_tda
,
6475 .type
= ARM_CP_CONST
, .resetvalue
= cpu
->isar
.dbgdidr
,
6478 /* Note that all these register fields hold "number of Xs minus 1". */
6479 brps
= arm_num_brps(cpu
);
6480 wrps
= arm_num_wrps(cpu
);
6481 ctx_cmps
= arm_num_ctx_cmps(cpu
);
6483 assert(ctx_cmps
<= brps
);
6485 define_one_arm_cp_reg(cpu
, &dbgdidr
);
6486 define_arm_cp_regs(cpu
, debug_cp_reginfo
);
6488 if (arm_feature(&cpu
->env
, ARM_FEATURE_LPAE
)) {
6489 define_arm_cp_regs(cpu
, debug_lpae_cp_reginfo
);
6492 for (i
= 0; i
< brps
; i
++) {
6493 ARMCPRegInfo dbgregs
[] = {
6494 { .name
= "DBGBVR", .state
= ARM_CP_STATE_BOTH
,
6495 .cp
= 14, .opc0
= 2, .opc1
= 0, .crn
= 0, .crm
= i
, .opc2
= 4,
6496 .access
= PL1_RW
, .accessfn
= access_tda
,
6497 .fieldoffset
= offsetof(CPUARMState
, cp15
.dbgbvr
[i
]),
6498 .writefn
= dbgbvr_write
, .raw_writefn
= raw_write
6500 { .name
= "DBGBCR", .state
= ARM_CP_STATE_BOTH
,
6501 .cp
= 14, .opc0
= 2, .opc1
= 0, .crn
= 0, .crm
= i
, .opc2
= 5,
6502 .access
= PL1_RW
, .accessfn
= access_tda
,
6503 .fieldoffset
= offsetof(CPUARMState
, cp15
.dbgbcr
[i
]),
6504 .writefn
= dbgbcr_write
, .raw_writefn
= raw_write
6508 define_arm_cp_regs(cpu
, dbgregs
);
6511 for (i
= 0; i
< wrps
; i
++) {
6512 ARMCPRegInfo dbgregs
[] = {
6513 { .name
= "DBGWVR", .state
= ARM_CP_STATE_BOTH
,
6514 .cp
= 14, .opc0
= 2, .opc1
= 0, .crn
= 0, .crm
= i
, .opc2
= 6,
6515 .access
= PL1_RW
, .accessfn
= access_tda
,
6516 .fieldoffset
= offsetof(CPUARMState
, cp15
.dbgwvr
[i
]),
6517 .writefn
= dbgwvr_write
, .raw_writefn
= raw_write
6519 { .name
= "DBGWCR", .state
= ARM_CP_STATE_BOTH
,
6520 .cp
= 14, .opc0
= 2, .opc1
= 0, .crn
= 0, .crm
= i
, .opc2
= 7,
6521 .access
= PL1_RW
, .accessfn
= access_tda
,
6522 .fieldoffset
= offsetof(CPUARMState
, cp15
.dbgwcr
[i
]),
6523 .writefn
= dbgwcr_write
, .raw_writefn
= raw_write
6527 define_arm_cp_regs(cpu
, dbgregs
);
6531 static void define_pmu_regs(ARMCPU
*cpu
)
6534 * v7 performance monitor control register: same implementor
6535 * field as main ID register, and we implement four counters in
6536 * addition to the cycle count register.
6538 unsigned int i
, pmcrn
= 4;
6539 ARMCPRegInfo pmcr
= {
6540 .name
= "PMCR", .cp
= 15, .crn
= 9, .crm
= 12, .opc1
= 0, .opc2
= 0,
6542 .type
= ARM_CP_IO
| ARM_CP_ALIAS
,
6543 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.c9_pmcr
),
6544 .accessfn
= pmreg_access
, .writefn
= pmcr_write
,
6545 .raw_writefn
= raw_write
,
6547 ARMCPRegInfo pmcr64
= {
6548 .name
= "PMCR_EL0", .state
= ARM_CP_STATE_AA64
,
6549 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 12, .opc2
= 0,
6550 .access
= PL0_RW
, .accessfn
= pmreg_access
,
6552 .fieldoffset
= offsetof(CPUARMState
, cp15
.c9_pmcr
),
6553 .resetvalue
= (cpu
->midr
& 0xff000000) | (pmcrn
<< PMCRN_SHIFT
) |
6555 .writefn
= pmcr_write
, .raw_writefn
= raw_write
,
6557 define_one_arm_cp_reg(cpu
, &pmcr
);
6558 define_one_arm_cp_reg(cpu
, &pmcr64
);
6559 for (i
= 0; i
< pmcrn
; i
++) {
6560 char *pmevcntr_name
= g_strdup_printf("PMEVCNTR%d", i
);
6561 char *pmevcntr_el0_name
= g_strdup_printf("PMEVCNTR%d_EL0", i
);
6562 char *pmevtyper_name
= g_strdup_printf("PMEVTYPER%d", i
);
6563 char *pmevtyper_el0_name
= g_strdup_printf("PMEVTYPER%d_EL0", i
);
6564 ARMCPRegInfo pmev_regs
[] = {
6565 { .name
= pmevcntr_name
, .cp
= 15, .crn
= 14,
6566 .crm
= 8 | (3 & (i
>> 3)), .opc1
= 0, .opc2
= i
& 7,
6567 .access
= PL0_RW
, .type
= ARM_CP_IO
| ARM_CP_ALIAS
,
6568 .readfn
= pmevcntr_readfn
, .writefn
= pmevcntr_writefn
,
6569 .accessfn
= pmreg_access
},
6570 { .name
= pmevcntr_el0_name
, .state
= ARM_CP_STATE_AA64
,
6571 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 8 | (3 & (i
>> 3)),
6572 .opc2
= i
& 7, .access
= PL0_RW
, .accessfn
= pmreg_access
,
6574 .readfn
= pmevcntr_readfn
, .writefn
= pmevcntr_writefn
,
6575 .raw_readfn
= pmevcntr_rawread
,
6576 .raw_writefn
= pmevcntr_rawwrite
},
6577 { .name
= pmevtyper_name
, .cp
= 15, .crn
= 14,
6578 .crm
= 12 | (3 & (i
>> 3)), .opc1
= 0, .opc2
= i
& 7,
6579 .access
= PL0_RW
, .type
= ARM_CP_IO
| ARM_CP_ALIAS
,
6580 .readfn
= pmevtyper_readfn
, .writefn
= pmevtyper_writefn
,
6581 .accessfn
= pmreg_access
},
6582 { .name
= pmevtyper_el0_name
, .state
= ARM_CP_STATE_AA64
,
6583 .opc0
= 3, .opc1
= 3, .crn
= 14, .crm
= 12 | (3 & (i
>> 3)),
6584 .opc2
= i
& 7, .access
= PL0_RW
, .accessfn
= pmreg_access
,
6586 .readfn
= pmevtyper_readfn
, .writefn
= pmevtyper_writefn
,
6587 .raw_writefn
= pmevtyper_rawwrite
},
6590 define_arm_cp_regs(cpu
, pmev_regs
);
6591 g_free(pmevcntr_name
);
6592 g_free(pmevcntr_el0_name
);
6593 g_free(pmevtyper_name
);
6594 g_free(pmevtyper_el0_name
);
6596 if (cpu_isar_feature(aa32_pmu_8_1
, cpu
)) {
6597 ARMCPRegInfo v81_pmu_regs
[] = {
6598 { .name
= "PMCEID2", .state
= ARM_CP_STATE_AA32
,
6599 .cp
= 15, .opc1
= 0, .crn
= 9, .crm
= 14, .opc2
= 4,
6600 .access
= PL0_R
, .accessfn
= pmreg_access
, .type
= ARM_CP_CONST
,
6601 .resetvalue
= extract64(cpu
->pmceid0
, 32, 32) },
6602 { .name
= "PMCEID3", .state
= ARM_CP_STATE_AA32
,
6603 .cp
= 15, .opc1
= 0, .crn
= 9, .crm
= 14, .opc2
= 5,
6604 .access
= PL0_R
, .accessfn
= pmreg_access
, .type
= ARM_CP_CONST
,
6605 .resetvalue
= extract64(cpu
->pmceid1
, 32, 32) },
6608 define_arm_cp_regs(cpu
, v81_pmu_regs
);
6610 if (cpu_isar_feature(any_pmu_8_4
, cpu
)) {
6611 static const ARMCPRegInfo v84_pmmir
= {
6612 .name
= "PMMIR_EL1", .state
= ARM_CP_STATE_BOTH
,
6613 .opc0
= 3, .opc1
= 0, .crn
= 9, .crm
= 14, .opc2
= 6,
6614 .access
= PL1_R
, .accessfn
= pmreg_access
, .type
= ARM_CP_CONST
,
6617 define_one_arm_cp_reg(cpu
, &v84_pmmir
);
6621 /* We don't know until after realize whether there's a GICv3
6622 * attached, and that is what registers the gicv3 sysregs.
6623 * So we have to fill in the GIC fields in ID_PFR/ID_PFR1_EL1/ID_AA64PFR0_EL1
6626 static uint64_t id_pfr1_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
6628 ARMCPU
*cpu
= env_archcpu(env
);
6629 uint64_t pfr1
= cpu
->id_pfr1
;
6631 if (env
->gicv3state
) {
6637 #ifndef CONFIG_USER_ONLY
6638 static uint64_t id_aa64pfr0_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
6640 ARMCPU
*cpu
= env_archcpu(env
);
6641 uint64_t pfr0
= cpu
->isar
.id_aa64pfr0
;
6643 if (env
->gicv3state
) {
6650 /* Shared logic between LORID and the rest of the LOR* registers.
6651 * Secure state has already been delt with.
6653 static CPAccessResult
access_lor_ns(CPUARMState
*env
)
6655 int el
= arm_current_el(env
);
6657 if (el
< 2 && (arm_hcr_el2_eff(env
) & HCR_TLOR
)) {
6658 return CP_ACCESS_TRAP_EL2
;
6660 if (el
< 3 && (env
->cp15
.scr_el3
& SCR_TLOR
)) {
6661 return CP_ACCESS_TRAP_EL3
;
6663 return CP_ACCESS_OK
;
6666 static CPAccessResult
access_lorid(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
6669 if (arm_is_secure_below_el3(env
)) {
6670 /* Access ok in secure mode. */
6671 return CP_ACCESS_OK
;
6673 return access_lor_ns(env
);
6676 static CPAccessResult
access_lor_other(CPUARMState
*env
,
6677 const ARMCPRegInfo
*ri
, bool isread
)
6679 if (arm_is_secure_below_el3(env
)) {
6680 /* Access denied in secure mode. */
6681 return CP_ACCESS_TRAP
;
6683 return access_lor_ns(env
);
6687 * A trivial implementation of ARMv8.1-LOR leaves all of these
6688 * registers fixed at 0, which indicates that there are zero
6689 * supported Limited Ordering regions.
6691 static const ARMCPRegInfo lor_reginfo
[] = {
6692 { .name
= "LORSA_EL1", .state
= ARM_CP_STATE_AA64
,
6693 .opc0
= 3, .opc1
= 0, .crn
= 10, .crm
= 4, .opc2
= 0,
6694 .access
= PL1_RW
, .accessfn
= access_lor_other
,
6695 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
6696 { .name
= "LOREA_EL1", .state
= ARM_CP_STATE_AA64
,
6697 .opc0
= 3, .opc1
= 0, .crn
= 10, .crm
= 4, .opc2
= 1,
6698 .access
= PL1_RW
, .accessfn
= access_lor_other
,
6699 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
6700 { .name
= "LORN_EL1", .state
= ARM_CP_STATE_AA64
,
6701 .opc0
= 3, .opc1
= 0, .crn
= 10, .crm
= 4, .opc2
= 2,
6702 .access
= PL1_RW
, .accessfn
= access_lor_other
,
6703 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
6704 { .name
= "LORC_EL1", .state
= ARM_CP_STATE_AA64
,
6705 .opc0
= 3, .opc1
= 0, .crn
= 10, .crm
= 4, .opc2
= 3,
6706 .access
= PL1_RW
, .accessfn
= access_lor_other
,
6707 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
6708 { .name
= "LORID_EL1", .state
= ARM_CP_STATE_AA64
,
6709 .opc0
= 3, .opc1
= 0, .crn
= 10, .crm
= 4, .opc2
= 7,
6710 .access
= PL1_R
, .accessfn
= access_lorid
,
6711 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
6715 #ifdef TARGET_AARCH64
6716 static CPAccessResult
access_pauth(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
6719 int el
= arm_current_el(env
);
6722 arm_feature(env
, ARM_FEATURE_EL2
) &&
6723 !(arm_hcr_el2_eff(env
) & HCR_APK
)) {
6724 return CP_ACCESS_TRAP_EL2
;
6727 arm_feature(env
, ARM_FEATURE_EL3
) &&
6728 !(env
->cp15
.scr_el3
& SCR_APK
)) {
6729 return CP_ACCESS_TRAP_EL3
;
6731 return CP_ACCESS_OK
;
6734 static const ARMCPRegInfo pauth_reginfo
[] = {
6735 { .name
= "APDAKEYLO_EL1", .state
= ARM_CP_STATE_AA64
,
6736 .opc0
= 3, .opc1
= 0, .crn
= 2, .crm
= 2, .opc2
= 0,
6737 .access
= PL1_RW
, .accessfn
= access_pauth
,
6738 .fieldoffset
= offsetof(CPUARMState
, keys
.apda
.lo
) },
6739 { .name
= "APDAKEYHI_EL1", .state
= ARM_CP_STATE_AA64
,
6740 .opc0
= 3, .opc1
= 0, .crn
= 2, .crm
= 2, .opc2
= 1,
6741 .access
= PL1_RW
, .accessfn
= access_pauth
,
6742 .fieldoffset
= offsetof(CPUARMState
, keys
.apda
.hi
) },
6743 { .name
= "APDBKEYLO_EL1", .state
= ARM_CP_STATE_AA64
,
6744 .opc0
= 3, .opc1
= 0, .crn
= 2, .crm
= 2, .opc2
= 2,
6745 .access
= PL1_RW
, .accessfn
= access_pauth
,
6746 .fieldoffset
= offsetof(CPUARMState
, keys
.apdb
.lo
) },
6747 { .name
= "APDBKEYHI_EL1", .state
= ARM_CP_STATE_AA64
,
6748 .opc0
= 3, .opc1
= 0, .crn
= 2, .crm
= 2, .opc2
= 3,
6749 .access
= PL1_RW
, .accessfn
= access_pauth
,
6750 .fieldoffset
= offsetof(CPUARMState
, keys
.apdb
.hi
) },
6751 { .name
= "APGAKEYLO_EL1", .state
= ARM_CP_STATE_AA64
,
6752 .opc0
= 3, .opc1
= 0, .crn
= 2, .crm
= 3, .opc2
= 0,
6753 .access
= PL1_RW
, .accessfn
= access_pauth
,
6754 .fieldoffset
= offsetof(CPUARMState
, keys
.apga
.lo
) },
6755 { .name
= "APGAKEYHI_EL1", .state
= ARM_CP_STATE_AA64
,
6756 .opc0
= 3, .opc1
= 0, .crn
= 2, .crm
= 3, .opc2
= 1,
6757 .access
= PL1_RW
, .accessfn
= access_pauth
,
6758 .fieldoffset
= offsetof(CPUARMState
, keys
.apga
.hi
) },
6759 { .name
= "APIAKEYLO_EL1", .state
= ARM_CP_STATE_AA64
,
6760 .opc0
= 3, .opc1
= 0, .crn
= 2, .crm
= 1, .opc2
= 0,
6761 .access
= PL1_RW
, .accessfn
= access_pauth
,
6762 .fieldoffset
= offsetof(CPUARMState
, keys
.apia
.lo
) },
6763 { .name
= "APIAKEYHI_EL1", .state
= ARM_CP_STATE_AA64
,
6764 .opc0
= 3, .opc1
= 0, .crn
= 2, .crm
= 1, .opc2
= 1,
6765 .access
= PL1_RW
, .accessfn
= access_pauth
,
6766 .fieldoffset
= offsetof(CPUARMState
, keys
.apia
.hi
) },
6767 { .name
= "APIBKEYLO_EL1", .state
= ARM_CP_STATE_AA64
,
6768 .opc0
= 3, .opc1
= 0, .crn
= 2, .crm
= 1, .opc2
= 2,
6769 .access
= PL1_RW
, .accessfn
= access_pauth
,
6770 .fieldoffset
= offsetof(CPUARMState
, keys
.apib
.lo
) },
6771 { .name
= "APIBKEYHI_EL1", .state
= ARM_CP_STATE_AA64
,
6772 .opc0
= 3, .opc1
= 0, .crn
= 2, .crm
= 1, .opc2
= 3,
6773 .access
= PL1_RW
, .accessfn
= access_pauth
,
6774 .fieldoffset
= offsetof(CPUARMState
, keys
.apib
.hi
) },
6778 static uint64_t rndr_readfn(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
6783 /* Success sets NZCV = 0000. */
6784 env
->NF
= env
->CF
= env
->VF
= 0, env
->ZF
= 1;
6786 if (qemu_guest_getrandom(&ret
, sizeof(ret
), &err
) < 0) {
6788 * ??? Failed, for unknown reasons in the crypto subsystem.
6789 * The best we can do is log the reason and return the
6790 * timed-out indication to the guest. There is no reason
6791 * we know to expect this failure to be transitory, so the
6792 * guest may well hang retrying the operation.
6794 qemu_log_mask(LOG_UNIMP
, "%s: Crypto failure: %s",
6795 ri
->name
, error_get_pretty(err
));
6798 env
->ZF
= 0; /* NZCF = 0100 */
6804 /* We do not support re-seeding, so the two registers operate the same. */
6805 static const ARMCPRegInfo rndr_reginfo
[] = {
6806 { .name
= "RNDR", .state
= ARM_CP_STATE_AA64
,
6807 .type
= ARM_CP_NO_RAW
| ARM_CP_SUPPRESS_TB_END
| ARM_CP_IO
,
6808 .opc0
= 3, .opc1
= 3, .crn
= 2, .crm
= 4, .opc2
= 0,
6809 .access
= PL0_R
, .readfn
= rndr_readfn
},
6810 { .name
= "RNDRRS", .state
= ARM_CP_STATE_AA64
,
6811 .type
= ARM_CP_NO_RAW
| ARM_CP_SUPPRESS_TB_END
| ARM_CP_IO
,
6812 .opc0
= 3, .opc1
= 3, .crn
= 2, .crm
= 4, .opc2
= 1,
6813 .access
= PL0_R
, .readfn
= rndr_readfn
},
6817 #ifndef CONFIG_USER_ONLY
6818 static void dccvap_writefn(CPUARMState
*env
, const ARMCPRegInfo
*opaque
,
6821 ARMCPU
*cpu
= env_archcpu(env
);
6822 /* CTR_EL0 System register -> DminLine, bits [19:16] */
6823 uint64_t dline_size
= 4 << ((cpu
->ctr
>> 16) & 0xF);
6824 uint64_t vaddr_in
= (uint64_t) value
;
6825 uint64_t vaddr
= vaddr_in
& ~(dline_size
- 1);
6827 int mem_idx
= cpu_mmu_index(env
, false);
6829 /* This won't be crossing page boundaries */
6830 haddr
= probe_read(env
, vaddr
, dline_size
, mem_idx
, GETPC());
6836 /* RCU lock is already being held */
6837 mr
= memory_region_from_host(haddr
, &offset
);
6840 memory_region_writeback(mr
, offset
, dline_size
);
6845 static const ARMCPRegInfo dcpop_reg
[] = {
6846 { .name
= "DC_CVAP", .state
= ARM_CP_STATE_AA64
,
6847 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 12, .opc2
= 1,
6848 .access
= PL0_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_SUPPRESS_TB_END
,
6849 .accessfn
= aa64_cacheop_poc_access
, .writefn
= dccvap_writefn
},
6853 static const ARMCPRegInfo dcpodp_reg
[] = {
6854 { .name
= "DC_CVADP", .state
= ARM_CP_STATE_AA64
,
6855 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 13, .opc2
= 1,
6856 .access
= PL0_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_SUPPRESS_TB_END
,
6857 .accessfn
= aa64_cacheop_poc_access
, .writefn
= dccvap_writefn
},
6860 #endif /*CONFIG_USER_ONLY*/
6862 static CPAccessResult
access_aa64_tid5(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
6865 if ((arm_current_el(env
) < 2) && (arm_hcr_el2_eff(env
) & HCR_TID5
)) {
6866 return CP_ACCESS_TRAP_EL2
;
6869 return CP_ACCESS_OK
;
6872 static CPAccessResult
access_mte(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
6875 int el
= arm_current_el(env
);
6878 arm_feature(env
, ARM_FEATURE_EL2
) &&
6879 !(arm_hcr_el2_eff(env
) & HCR_ATA
)) {
6880 return CP_ACCESS_TRAP_EL2
;
6883 arm_feature(env
, ARM_FEATURE_EL3
) &&
6884 !(env
->cp15
.scr_el3
& SCR_ATA
)) {
6885 return CP_ACCESS_TRAP_EL3
;
6887 return CP_ACCESS_OK
;
6890 static uint64_t tco_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
6892 return env
->pstate
& PSTATE_TCO
;
6895 static void tco_write(CPUARMState
*env
, const ARMCPRegInfo
*ri
, uint64_t val
)
6897 env
->pstate
= (env
->pstate
& ~PSTATE_TCO
) | (val
& PSTATE_TCO
);
6900 static const ARMCPRegInfo mte_reginfo
[] = {
6901 { .name
= "TFSRE0_EL1", .state
= ARM_CP_STATE_AA64
,
6902 .opc0
= 3, .opc1
= 0, .crn
= 5, .crm
= 6, .opc2
= 1,
6903 .access
= PL1_RW
, .accessfn
= access_mte
,
6904 .fieldoffset
= offsetof(CPUARMState
, cp15
.tfsr_el
[0]) },
6905 { .name
= "TFSR_EL1", .state
= ARM_CP_STATE_AA64
,
6906 .opc0
= 3, .opc1
= 0, .crn
= 5, .crm
= 6, .opc2
= 0,
6907 .access
= PL1_RW
, .accessfn
= access_mte
,
6908 .fieldoffset
= offsetof(CPUARMState
, cp15
.tfsr_el
[1]) },
6909 { .name
= "TFSR_EL2", .state
= ARM_CP_STATE_AA64
,
6910 .opc0
= 3, .opc1
= 4, .crn
= 5, .crm
= 6, .opc2
= 0,
6911 .access
= PL2_RW
, .accessfn
= access_mte
,
6912 .fieldoffset
= offsetof(CPUARMState
, cp15
.tfsr_el
[2]) },
6913 { .name
= "TFSR_EL3", .state
= ARM_CP_STATE_AA64
,
6914 .opc0
= 3, .opc1
= 6, .crn
= 5, .crm
= 6, .opc2
= 0,
6916 .fieldoffset
= offsetof(CPUARMState
, cp15
.tfsr_el
[3]) },
6917 { .name
= "RGSR_EL1", .state
= ARM_CP_STATE_AA64
,
6918 .opc0
= 3, .opc1
= 0, .crn
= 1, .crm
= 0, .opc2
= 5,
6919 .access
= PL1_RW
, .accessfn
= access_mte
,
6920 .fieldoffset
= offsetof(CPUARMState
, cp15
.rgsr_el1
) },
6921 { .name
= "GCR_EL1", .state
= ARM_CP_STATE_AA64
,
6922 .opc0
= 3, .opc1
= 0, .crn
= 1, .crm
= 0, .opc2
= 6,
6923 .access
= PL1_RW
, .accessfn
= access_mte
,
6924 .fieldoffset
= offsetof(CPUARMState
, cp15
.gcr_el1
) },
6925 { .name
= "GMID_EL1", .state
= ARM_CP_STATE_AA64
,
6926 .opc0
= 3, .opc1
= 1, .crn
= 0, .crm
= 0, .opc2
= 4,
6927 .access
= PL1_R
, .accessfn
= access_aa64_tid5
,
6928 .type
= ARM_CP_CONST
, .resetvalue
= GMID_EL1_BS
},
6929 { .name
= "TCO", .state
= ARM_CP_STATE_AA64
,
6930 .opc0
= 3, .opc1
= 3, .crn
= 4, .crm
= 2, .opc2
= 7,
6931 .type
= ARM_CP_NO_RAW
,
6932 .access
= PL0_RW
, .readfn
= tco_read
, .writefn
= tco_write
},
6933 { .name
= "DC_IGVAC", .state
= ARM_CP_STATE_AA64
,
6934 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 6, .opc2
= 3,
6935 .type
= ARM_CP_NOP
, .access
= PL1_W
,
6936 .accessfn
= aa64_cacheop_poc_access
},
6937 { .name
= "DC_IGSW", .state
= ARM_CP_STATE_AA64
,
6938 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 6, .opc2
= 4,
6939 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= access_tsw
},
6940 { .name
= "DC_IGDVAC", .state
= ARM_CP_STATE_AA64
,
6941 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 6, .opc2
= 5,
6942 .type
= ARM_CP_NOP
, .access
= PL1_W
,
6943 .accessfn
= aa64_cacheop_poc_access
},
6944 { .name
= "DC_IGDSW", .state
= ARM_CP_STATE_AA64
,
6945 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 6, .opc2
= 6,
6946 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= access_tsw
},
6947 { .name
= "DC_CGSW", .state
= ARM_CP_STATE_AA64
,
6948 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 10, .opc2
= 4,
6949 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= access_tsw
},
6950 { .name
= "DC_CGDSW", .state
= ARM_CP_STATE_AA64
,
6951 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 10, .opc2
= 6,
6952 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= access_tsw
},
6953 { .name
= "DC_CIGSW", .state
= ARM_CP_STATE_AA64
,
6954 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 14, .opc2
= 4,
6955 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= access_tsw
},
6956 { .name
= "DC_CIGDSW", .state
= ARM_CP_STATE_AA64
,
6957 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 14, .opc2
= 6,
6958 .type
= ARM_CP_NOP
, .access
= PL1_W
, .accessfn
= access_tsw
},
6962 static const ARMCPRegInfo mte_tco_ro_reginfo
[] = {
6963 { .name
= "TCO", .state
= ARM_CP_STATE_AA64
,
6964 .opc0
= 3, .opc1
= 3, .crn
= 4, .crm
= 2, .opc2
= 7,
6965 .type
= ARM_CP_CONST
, .access
= PL0_RW
, },
6969 static const ARMCPRegInfo mte_el0_cacheop_reginfo
[] = {
6970 { .name
= "DC_CGVAC", .state
= ARM_CP_STATE_AA64
,
6971 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 10, .opc2
= 3,
6972 .type
= ARM_CP_NOP
, .access
= PL0_W
,
6973 .accessfn
= aa64_cacheop_poc_access
},
6974 { .name
= "DC_CGDVAC", .state
= ARM_CP_STATE_AA64
,
6975 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 10, .opc2
= 5,
6976 .type
= ARM_CP_NOP
, .access
= PL0_W
,
6977 .accessfn
= aa64_cacheop_poc_access
},
6978 { .name
= "DC_CGVAP", .state
= ARM_CP_STATE_AA64
,
6979 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 12, .opc2
= 3,
6980 .type
= ARM_CP_NOP
, .access
= PL0_W
,
6981 .accessfn
= aa64_cacheop_poc_access
},
6982 { .name
= "DC_CGDVAP", .state
= ARM_CP_STATE_AA64
,
6983 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 12, .opc2
= 5,
6984 .type
= ARM_CP_NOP
, .access
= PL0_W
,
6985 .accessfn
= aa64_cacheop_poc_access
},
6986 { .name
= "DC_CGVADP", .state
= ARM_CP_STATE_AA64
,
6987 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 13, .opc2
= 3,
6988 .type
= ARM_CP_NOP
, .access
= PL0_W
,
6989 .accessfn
= aa64_cacheop_poc_access
},
6990 { .name
= "DC_CGDVADP", .state
= ARM_CP_STATE_AA64
,
6991 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 13, .opc2
= 5,
6992 .type
= ARM_CP_NOP
, .access
= PL0_W
,
6993 .accessfn
= aa64_cacheop_poc_access
},
6994 { .name
= "DC_CIGVAC", .state
= ARM_CP_STATE_AA64
,
6995 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 14, .opc2
= 3,
6996 .type
= ARM_CP_NOP
, .access
= PL0_W
,
6997 .accessfn
= aa64_cacheop_poc_access
},
6998 { .name
= "DC_CIGDVAC", .state
= ARM_CP_STATE_AA64
,
6999 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 14, .opc2
= 5,
7000 .type
= ARM_CP_NOP
, .access
= PL0_W
,
7001 .accessfn
= aa64_cacheop_poc_access
},
7002 { .name
= "DC_GVA", .state
= ARM_CP_STATE_AA64
,
7003 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 4, .opc2
= 3,
7004 .access
= PL0_W
, .type
= ARM_CP_DC_GVA
,
7005 #ifndef CONFIG_USER_ONLY
7006 /* Avoid overhead of an access check that always passes in user-mode */
7007 .accessfn
= aa64_zva_access
,
7010 { .name
= "DC_GZVA", .state
= ARM_CP_STATE_AA64
,
7011 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 4, .opc2
= 4,
7012 .access
= PL0_W
, .type
= ARM_CP_DC_GZVA
,
7013 #ifndef CONFIG_USER_ONLY
7014 /* Avoid overhead of an access check that always passes in user-mode */
7015 .accessfn
= aa64_zva_access
,
7023 static CPAccessResult
access_predinv(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
7026 int el
= arm_current_el(env
);
7029 uint64_t sctlr
= arm_sctlr(env
, el
);
7030 if (!(sctlr
& SCTLR_EnRCTX
)) {
7031 return CP_ACCESS_TRAP
;
7033 } else if (el
== 1) {
7034 uint64_t hcr
= arm_hcr_el2_eff(env
);
7036 return CP_ACCESS_TRAP_EL2
;
7039 return CP_ACCESS_OK
;
7042 static const ARMCPRegInfo predinv_reginfo
[] = {
7043 { .name
= "CFP_RCTX", .state
= ARM_CP_STATE_AA64
,
7044 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 3, .opc2
= 4,
7045 .type
= ARM_CP_NOP
, .access
= PL0_W
, .accessfn
= access_predinv
},
7046 { .name
= "DVP_RCTX", .state
= ARM_CP_STATE_AA64
,
7047 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 3, .opc2
= 5,
7048 .type
= ARM_CP_NOP
, .access
= PL0_W
, .accessfn
= access_predinv
},
7049 { .name
= "CPP_RCTX", .state
= ARM_CP_STATE_AA64
,
7050 .opc0
= 1, .opc1
= 3, .crn
= 7, .crm
= 3, .opc2
= 7,
7051 .type
= ARM_CP_NOP
, .access
= PL0_W
, .accessfn
= access_predinv
},
7053 * Note the AArch32 opcodes have a different OPC1.
7055 { .name
= "CFPRCTX", .state
= ARM_CP_STATE_AA32
,
7056 .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 3, .opc2
= 4,
7057 .type
= ARM_CP_NOP
, .access
= PL0_W
, .accessfn
= access_predinv
},
7058 { .name
= "DVPRCTX", .state
= ARM_CP_STATE_AA32
,
7059 .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 3, .opc2
= 5,
7060 .type
= ARM_CP_NOP
, .access
= PL0_W
, .accessfn
= access_predinv
},
7061 { .name
= "CPPRCTX", .state
= ARM_CP_STATE_AA32
,
7062 .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 3, .opc2
= 7,
7063 .type
= ARM_CP_NOP
, .access
= PL0_W
, .accessfn
= access_predinv
},
7067 static uint64_t ccsidr2_read(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
7069 /* Read the high 32 bits of the current CCSIDR */
7070 return extract64(ccsidr_read(env
, ri
), 32, 32);
7073 static const ARMCPRegInfo ccsidr2_reginfo
[] = {
7074 { .name
= "CCSIDR2", .state
= ARM_CP_STATE_BOTH
,
7075 .opc0
= 3, .opc1
= 1, .crn
= 0, .crm
= 0, .opc2
= 2,
7077 .accessfn
= access_aa64_tid2
,
7078 .readfn
= ccsidr2_read
, .type
= ARM_CP_NO_RAW
},
7082 static CPAccessResult
access_aa64_tid3(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
7085 if ((arm_current_el(env
) < 2) && (arm_hcr_el2_eff(env
) & HCR_TID3
)) {
7086 return CP_ACCESS_TRAP_EL2
;
7089 return CP_ACCESS_OK
;
7092 static CPAccessResult
access_aa32_tid3(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
7095 if (arm_feature(env
, ARM_FEATURE_V8
)) {
7096 return access_aa64_tid3(env
, ri
, isread
);
7099 return CP_ACCESS_OK
;
7102 static CPAccessResult
access_jazelle(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
7105 if (arm_current_el(env
) == 1 && (arm_hcr_el2_eff(env
) & HCR_TID0
)) {
7106 return CP_ACCESS_TRAP_EL2
;
7109 return CP_ACCESS_OK
;
7112 static const ARMCPRegInfo jazelle_regs
[] = {
7114 .cp
= 14, .crn
= 0, .crm
= 0, .opc1
= 7, .opc2
= 0,
7115 .access
= PL1_R
, .accessfn
= access_jazelle
,
7116 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
7118 .cp
= 14, .crn
= 1, .crm
= 0, .opc1
= 7, .opc2
= 0,
7119 .access
= PL1_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
7121 .cp
= 14, .crn
= 2, .crm
= 0, .opc1
= 7, .opc2
= 0,
7122 .access
= PL1_RW
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
7126 static const ARMCPRegInfo vhe_reginfo
[] = {
7127 { .name
= "CONTEXTIDR_EL2", .state
= ARM_CP_STATE_AA64
,
7128 .opc0
= 3, .opc1
= 4, .crn
= 13, .crm
= 0, .opc2
= 1,
7130 .fieldoffset
= offsetof(CPUARMState
, cp15
.contextidr_el
[2]) },
7131 { .name
= "TTBR1_EL2", .state
= ARM_CP_STATE_AA64
,
7132 .opc0
= 3, .opc1
= 4, .crn
= 2, .crm
= 0, .opc2
= 1,
7133 .access
= PL2_RW
, .writefn
= vmsa_tcr_ttbr_el2_write
,
7134 .fieldoffset
= offsetof(CPUARMState
, cp15
.ttbr1_el
[2]) },
7135 #ifndef CONFIG_USER_ONLY
7136 { .name
= "CNTHV_CVAL_EL2", .state
= ARM_CP_STATE_AA64
,
7137 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 3, .opc2
= 2,
7139 offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_HYPVIRT
].cval
),
7140 .type
= ARM_CP_IO
, .access
= PL2_RW
,
7141 .writefn
= gt_hv_cval_write
, .raw_writefn
= raw_write
},
7142 { .name
= "CNTHV_TVAL_EL2", .state
= ARM_CP_STATE_BOTH
,
7143 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 3, .opc2
= 0,
7144 .type
= ARM_CP_NO_RAW
| ARM_CP_IO
, .access
= PL2_RW
,
7145 .resetfn
= gt_hv_timer_reset
,
7146 .readfn
= gt_hv_tval_read
, .writefn
= gt_hv_tval_write
},
7147 { .name
= "CNTHV_CTL_EL2", .state
= ARM_CP_STATE_BOTH
,
7149 .opc0
= 3, .opc1
= 4, .crn
= 14, .crm
= 3, .opc2
= 1,
7151 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_HYPVIRT
].ctl
),
7152 .writefn
= gt_hv_ctl_write
, .raw_writefn
= raw_write
},
7153 { .name
= "CNTP_CTL_EL02", .state
= ARM_CP_STATE_AA64
,
7154 .opc0
= 3, .opc1
= 5, .crn
= 14, .crm
= 2, .opc2
= 1,
7155 .type
= ARM_CP_IO
| ARM_CP_ALIAS
,
7156 .access
= PL2_RW
, .accessfn
= e2h_access
,
7157 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_PHYS
].ctl
),
7158 .writefn
= gt_phys_ctl_write
, .raw_writefn
= raw_write
},
7159 { .name
= "CNTV_CTL_EL02", .state
= ARM_CP_STATE_AA64
,
7160 .opc0
= 3, .opc1
= 5, .crn
= 14, .crm
= 3, .opc2
= 1,
7161 .type
= ARM_CP_IO
| ARM_CP_ALIAS
,
7162 .access
= PL2_RW
, .accessfn
= e2h_access
,
7163 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_VIRT
].ctl
),
7164 .writefn
= gt_virt_ctl_write
, .raw_writefn
= raw_write
},
7165 { .name
= "CNTP_TVAL_EL02", .state
= ARM_CP_STATE_AA64
,
7166 .opc0
= 3, .opc1
= 5, .crn
= 14, .crm
= 2, .opc2
= 0,
7167 .type
= ARM_CP_NO_RAW
| ARM_CP_IO
| ARM_CP_ALIAS
,
7168 .access
= PL2_RW
, .accessfn
= e2h_access
,
7169 .readfn
= gt_phys_tval_read
, .writefn
= gt_phys_tval_write
},
7170 { .name
= "CNTV_TVAL_EL02", .state
= ARM_CP_STATE_AA64
,
7171 .opc0
= 3, .opc1
= 5, .crn
= 14, .crm
= 3, .opc2
= 0,
7172 .type
= ARM_CP_NO_RAW
| ARM_CP_IO
| ARM_CP_ALIAS
,
7173 .access
= PL2_RW
, .accessfn
= e2h_access
,
7174 .readfn
= gt_virt_tval_read
, .writefn
= gt_virt_tval_write
},
7175 { .name
= "CNTP_CVAL_EL02", .state
= ARM_CP_STATE_AA64
,
7176 .opc0
= 3, .opc1
= 5, .crn
= 14, .crm
= 2, .opc2
= 2,
7177 .type
= ARM_CP_IO
| ARM_CP_ALIAS
,
7178 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_PHYS
].cval
),
7179 .access
= PL2_RW
, .accessfn
= e2h_access
,
7180 .writefn
= gt_phys_cval_write
, .raw_writefn
= raw_write
},
7181 { .name
= "CNTV_CVAL_EL02", .state
= ARM_CP_STATE_AA64
,
7182 .opc0
= 3, .opc1
= 5, .crn
= 14, .crm
= 3, .opc2
= 2,
7183 .type
= ARM_CP_IO
| ARM_CP_ALIAS
,
7184 .fieldoffset
= offsetof(CPUARMState
, cp15
.c14_timer
[GTIMER_VIRT
].cval
),
7185 .access
= PL2_RW
, .accessfn
= e2h_access
,
7186 .writefn
= gt_virt_cval_write
, .raw_writefn
= raw_write
},
7191 #ifndef CONFIG_USER_ONLY
7192 static const ARMCPRegInfo ats1e1_reginfo
[] = {
7193 { .name
= "AT_S1E1R", .state
= ARM_CP_STATE_AA64
,
7194 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 9, .opc2
= 0,
7195 .access
= PL1_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
7196 .writefn
= ats_write64
},
7197 { .name
= "AT_S1E1W", .state
= ARM_CP_STATE_AA64
,
7198 .opc0
= 1, .opc1
= 0, .crn
= 7, .crm
= 9, .opc2
= 1,
7199 .access
= PL1_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
7200 .writefn
= ats_write64
},
7204 static const ARMCPRegInfo ats1cp_reginfo
[] = {
7205 { .name
= "ATS1CPRP",
7206 .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 9, .opc2
= 0,
7207 .access
= PL1_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
7208 .writefn
= ats_write
},
7209 { .name
= "ATS1CPWP",
7210 .cp
= 15, .opc1
= 0, .crn
= 7, .crm
= 9, .opc2
= 1,
7211 .access
= PL1_W
, .type
= ARM_CP_NO_RAW
| ARM_CP_RAISES_EXC
,
7212 .writefn
= ats_write
},
7218 * ACTLR2 and HACTLR2 map to ACTLR_EL1[63:32] and
7219 * ACTLR_EL2[63:32]. They exist only if the ID_MMFR4.AC2 field
7220 * is non-zero, which is never for ARMv7, optionally in ARMv8
7221 * and mandatorily for ARMv8.2 and up.
7222 * ACTLR2 is banked for S and NS if EL3 is AArch32. Since QEMU's
7223 * implementation is RAZ/WI we can ignore this detail, as we
7226 static const ARMCPRegInfo actlr2_hactlr2_reginfo
[] = {
7227 { .name
= "ACTLR2", .state
= ARM_CP_STATE_AA32
,
7228 .cp
= 15, .opc1
= 0, .crn
= 1, .crm
= 0, .opc2
= 3,
7229 .access
= PL1_RW
, .accessfn
= access_tacr
,
7230 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
7231 { .name
= "HACTLR2", .state
= ARM_CP_STATE_AA32
,
7232 .cp
= 15, .opc1
= 4, .crn
= 1, .crm
= 0, .opc2
= 3,
7233 .access
= PL2_RW
, .type
= ARM_CP_CONST
,
7238 void register_cp_regs_for_features(ARMCPU
*cpu
)
7240 /* Register all the coprocessor registers based on feature bits */
7241 CPUARMState
*env
= &cpu
->env
;
7242 if (arm_feature(env
, ARM_FEATURE_M
)) {
7243 /* M profile has no coprocessor registers */
7247 define_arm_cp_regs(cpu
, cp_reginfo
);
7248 if (!arm_feature(env
, ARM_FEATURE_V8
)) {
7249 /* Must go early as it is full of wildcards that may be
7250 * overridden by later definitions.
7252 define_arm_cp_regs(cpu
, not_v8_cp_reginfo
);
7255 if (arm_feature(env
, ARM_FEATURE_V6
)) {
7256 /* The ID registers all have impdef reset values */
7257 ARMCPRegInfo v6_idregs
[] = {
7258 { .name
= "ID_PFR0", .state
= ARM_CP_STATE_BOTH
,
7259 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 1, .opc2
= 0,
7260 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7261 .accessfn
= access_aa32_tid3
,
7262 .resetvalue
= cpu
->id_pfr0
},
7263 /* ID_PFR1 is not a plain ARM_CP_CONST because we don't know
7264 * the value of the GIC field until after we define these regs.
7266 { .name
= "ID_PFR1", .state
= ARM_CP_STATE_BOTH
,
7267 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 1, .opc2
= 1,
7268 .access
= PL1_R
, .type
= ARM_CP_NO_RAW
,
7269 .accessfn
= access_aa32_tid3
,
7270 .readfn
= id_pfr1_read
,
7271 .writefn
= arm_cp_write_ignore
},
7272 { .name
= "ID_DFR0", .state
= ARM_CP_STATE_BOTH
,
7273 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 1, .opc2
= 2,
7274 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7275 .accessfn
= access_aa32_tid3
,
7276 .resetvalue
= cpu
->isar
.id_dfr0
},
7277 { .name
= "ID_AFR0", .state
= ARM_CP_STATE_BOTH
,
7278 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 1, .opc2
= 3,
7279 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7280 .accessfn
= access_aa32_tid3
,
7281 .resetvalue
= cpu
->id_afr0
},
7282 { .name
= "ID_MMFR0", .state
= ARM_CP_STATE_BOTH
,
7283 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 1, .opc2
= 4,
7284 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7285 .accessfn
= access_aa32_tid3
,
7286 .resetvalue
= cpu
->isar
.id_mmfr0
},
7287 { .name
= "ID_MMFR1", .state
= ARM_CP_STATE_BOTH
,
7288 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 1, .opc2
= 5,
7289 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7290 .accessfn
= access_aa32_tid3
,
7291 .resetvalue
= cpu
->isar
.id_mmfr1
},
7292 { .name
= "ID_MMFR2", .state
= ARM_CP_STATE_BOTH
,
7293 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 1, .opc2
= 6,
7294 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7295 .accessfn
= access_aa32_tid3
,
7296 .resetvalue
= cpu
->isar
.id_mmfr2
},
7297 { .name
= "ID_MMFR3", .state
= ARM_CP_STATE_BOTH
,
7298 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 1, .opc2
= 7,
7299 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7300 .accessfn
= access_aa32_tid3
,
7301 .resetvalue
= cpu
->isar
.id_mmfr3
},
7302 { .name
= "ID_ISAR0", .state
= ARM_CP_STATE_BOTH
,
7303 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 2, .opc2
= 0,
7304 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7305 .accessfn
= access_aa32_tid3
,
7306 .resetvalue
= cpu
->isar
.id_isar0
},
7307 { .name
= "ID_ISAR1", .state
= ARM_CP_STATE_BOTH
,
7308 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 2, .opc2
= 1,
7309 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7310 .accessfn
= access_aa32_tid3
,
7311 .resetvalue
= cpu
->isar
.id_isar1
},
7312 { .name
= "ID_ISAR2", .state
= ARM_CP_STATE_BOTH
,
7313 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 2, .opc2
= 2,
7314 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7315 .accessfn
= access_aa32_tid3
,
7316 .resetvalue
= cpu
->isar
.id_isar2
},
7317 { .name
= "ID_ISAR3", .state
= ARM_CP_STATE_BOTH
,
7318 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 2, .opc2
= 3,
7319 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7320 .accessfn
= access_aa32_tid3
,
7321 .resetvalue
= cpu
->isar
.id_isar3
},
7322 { .name
= "ID_ISAR4", .state
= ARM_CP_STATE_BOTH
,
7323 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 2, .opc2
= 4,
7324 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7325 .accessfn
= access_aa32_tid3
,
7326 .resetvalue
= cpu
->isar
.id_isar4
},
7327 { .name
= "ID_ISAR5", .state
= ARM_CP_STATE_BOTH
,
7328 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 2, .opc2
= 5,
7329 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7330 .accessfn
= access_aa32_tid3
,
7331 .resetvalue
= cpu
->isar
.id_isar5
},
7332 { .name
= "ID_MMFR4", .state
= ARM_CP_STATE_BOTH
,
7333 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 2, .opc2
= 6,
7334 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7335 .accessfn
= access_aa32_tid3
,
7336 .resetvalue
= cpu
->isar
.id_mmfr4
},
7337 { .name
= "ID_ISAR6", .state
= ARM_CP_STATE_BOTH
,
7338 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 2, .opc2
= 7,
7339 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7340 .accessfn
= access_aa32_tid3
,
7341 .resetvalue
= cpu
->isar
.id_isar6
},
7344 define_arm_cp_regs(cpu
, v6_idregs
);
7345 define_arm_cp_regs(cpu
, v6_cp_reginfo
);
7347 define_arm_cp_regs(cpu
, not_v6_cp_reginfo
);
7349 if (arm_feature(env
, ARM_FEATURE_V6K
)) {
7350 define_arm_cp_regs(cpu
, v6k_cp_reginfo
);
7352 if (arm_feature(env
, ARM_FEATURE_V7MP
) &&
7353 !arm_feature(env
, ARM_FEATURE_PMSA
)) {
7354 define_arm_cp_regs(cpu
, v7mp_cp_reginfo
);
7356 if (arm_feature(env
, ARM_FEATURE_V7VE
)) {
7357 define_arm_cp_regs(cpu
, pmovsset_cp_reginfo
);
7359 if (arm_feature(env
, ARM_FEATURE_V7
)) {
7360 ARMCPRegInfo clidr
= {
7361 .name
= "CLIDR", .state
= ARM_CP_STATE_BOTH
,
7362 .opc0
= 3, .crn
= 0, .crm
= 0, .opc1
= 1, .opc2
= 1,
7363 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7364 .accessfn
= access_aa64_tid2
,
7365 .resetvalue
= cpu
->clidr
7367 define_one_arm_cp_reg(cpu
, &clidr
);
7368 define_arm_cp_regs(cpu
, v7_cp_reginfo
);
7369 define_debug_regs(cpu
);
7370 define_pmu_regs(cpu
);
7372 define_arm_cp_regs(cpu
, not_v7_cp_reginfo
);
7374 if (arm_feature(env
, ARM_FEATURE_V8
)) {
7375 /* AArch64 ID registers, which all have impdef reset values.
7376 * Note that within the ID register ranges the unused slots
7377 * must all RAZ, not UNDEF; future architecture versions may
7378 * define new registers here.
7380 ARMCPRegInfo v8_idregs
[] = {
7382 * ID_AA64PFR0_EL1 is not a plain ARM_CP_CONST in system
7383 * emulation because we don't know the right value for the
7384 * GIC field until after we define these regs.
7386 { .name
= "ID_AA64PFR0_EL1", .state
= ARM_CP_STATE_AA64
,
7387 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 4, .opc2
= 0,
7389 #ifdef CONFIG_USER_ONLY
7390 .type
= ARM_CP_CONST
,
7391 .resetvalue
= cpu
->isar
.id_aa64pfr0
7393 .type
= ARM_CP_NO_RAW
,
7394 .accessfn
= access_aa64_tid3
,
7395 .readfn
= id_aa64pfr0_read
,
7396 .writefn
= arm_cp_write_ignore
7399 { .name
= "ID_AA64PFR1_EL1", .state
= ARM_CP_STATE_AA64
,
7400 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 4, .opc2
= 1,
7401 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7402 .accessfn
= access_aa64_tid3
,
7403 .resetvalue
= cpu
->isar
.id_aa64pfr1
},
7404 { .name
= "ID_AA64PFR2_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7405 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 4, .opc2
= 2,
7406 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7407 .accessfn
= access_aa64_tid3
,
7409 { .name
= "ID_AA64PFR3_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7410 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 4, .opc2
= 3,
7411 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7412 .accessfn
= access_aa64_tid3
,
7414 { .name
= "ID_AA64ZFR0_EL1", .state
= ARM_CP_STATE_AA64
,
7415 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 4, .opc2
= 4,
7416 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7417 .accessfn
= access_aa64_tid3
,
7418 /* At present, only SVEver == 0 is defined anyway. */
7420 { .name
= "ID_AA64PFR5_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7421 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 4, .opc2
= 5,
7422 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7423 .accessfn
= access_aa64_tid3
,
7425 { .name
= "ID_AA64PFR6_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7426 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 4, .opc2
= 6,
7427 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7428 .accessfn
= access_aa64_tid3
,
7430 { .name
= "ID_AA64PFR7_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7431 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 4, .opc2
= 7,
7432 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7433 .accessfn
= access_aa64_tid3
,
7435 { .name
= "ID_AA64DFR0_EL1", .state
= ARM_CP_STATE_AA64
,
7436 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 5, .opc2
= 0,
7437 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7438 .accessfn
= access_aa64_tid3
,
7439 .resetvalue
= cpu
->isar
.id_aa64dfr0
},
7440 { .name
= "ID_AA64DFR1_EL1", .state
= ARM_CP_STATE_AA64
,
7441 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 5, .opc2
= 1,
7442 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7443 .accessfn
= access_aa64_tid3
,
7444 .resetvalue
= cpu
->isar
.id_aa64dfr1
},
7445 { .name
= "ID_AA64DFR2_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7446 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 5, .opc2
= 2,
7447 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7448 .accessfn
= access_aa64_tid3
,
7450 { .name
= "ID_AA64DFR3_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7451 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 5, .opc2
= 3,
7452 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7453 .accessfn
= access_aa64_tid3
,
7455 { .name
= "ID_AA64AFR0_EL1", .state
= ARM_CP_STATE_AA64
,
7456 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 5, .opc2
= 4,
7457 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7458 .accessfn
= access_aa64_tid3
,
7459 .resetvalue
= cpu
->id_aa64afr0
},
7460 { .name
= "ID_AA64AFR1_EL1", .state
= ARM_CP_STATE_AA64
,
7461 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 5, .opc2
= 5,
7462 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7463 .accessfn
= access_aa64_tid3
,
7464 .resetvalue
= cpu
->id_aa64afr1
},
7465 { .name
= "ID_AA64AFR2_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7466 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 5, .opc2
= 6,
7467 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7468 .accessfn
= access_aa64_tid3
,
7470 { .name
= "ID_AA64AFR3_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7471 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 5, .opc2
= 7,
7472 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7473 .accessfn
= access_aa64_tid3
,
7475 { .name
= "ID_AA64ISAR0_EL1", .state
= ARM_CP_STATE_AA64
,
7476 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 6, .opc2
= 0,
7477 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7478 .accessfn
= access_aa64_tid3
,
7479 .resetvalue
= cpu
->isar
.id_aa64isar0
},
7480 { .name
= "ID_AA64ISAR1_EL1", .state
= ARM_CP_STATE_AA64
,
7481 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 6, .opc2
= 1,
7482 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7483 .accessfn
= access_aa64_tid3
,
7484 .resetvalue
= cpu
->isar
.id_aa64isar1
},
7485 { .name
= "ID_AA64ISAR2_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7486 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 6, .opc2
= 2,
7487 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7488 .accessfn
= access_aa64_tid3
,
7490 { .name
= "ID_AA64ISAR3_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7491 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 6, .opc2
= 3,
7492 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7493 .accessfn
= access_aa64_tid3
,
7495 { .name
= "ID_AA64ISAR4_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7496 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 6, .opc2
= 4,
7497 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7498 .accessfn
= access_aa64_tid3
,
7500 { .name
= "ID_AA64ISAR5_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7501 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 6, .opc2
= 5,
7502 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7503 .accessfn
= access_aa64_tid3
,
7505 { .name
= "ID_AA64ISAR6_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7506 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 6, .opc2
= 6,
7507 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7508 .accessfn
= access_aa64_tid3
,
7510 { .name
= "ID_AA64ISAR7_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7511 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 6, .opc2
= 7,
7512 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7513 .accessfn
= access_aa64_tid3
,
7515 { .name
= "ID_AA64MMFR0_EL1", .state
= ARM_CP_STATE_AA64
,
7516 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 7, .opc2
= 0,
7517 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7518 .accessfn
= access_aa64_tid3
,
7519 .resetvalue
= cpu
->isar
.id_aa64mmfr0
},
7520 { .name
= "ID_AA64MMFR1_EL1", .state
= ARM_CP_STATE_AA64
,
7521 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 7, .opc2
= 1,
7522 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7523 .accessfn
= access_aa64_tid3
,
7524 .resetvalue
= cpu
->isar
.id_aa64mmfr1
},
7525 { .name
= "ID_AA64MMFR2_EL1", .state
= ARM_CP_STATE_AA64
,
7526 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 7, .opc2
= 2,
7527 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7528 .accessfn
= access_aa64_tid3
,
7529 .resetvalue
= cpu
->isar
.id_aa64mmfr2
},
7530 { .name
= "ID_AA64MMFR3_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7531 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 7, .opc2
= 3,
7532 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7533 .accessfn
= access_aa64_tid3
,
7535 { .name
= "ID_AA64MMFR4_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7536 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 7, .opc2
= 4,
7537 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7538 .accessfn
= access_aa64_tid3
,
7540 { .name
= "ID_AA64MMFR5_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7541 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 7, .opc2
= 5,
7542 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7543 .accessfn
= access_aa64_tid3
,
7545 { .name
= "ID_AA64MMFR6_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7546 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 7, .opc2
= 6,
7547 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7548 .accessfn
= access_aa64_tid3
,
7550 { .name
= "ID_AA64MMFR7_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7551 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 7, .opc2
= 7,
7552 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7553 .accessfn
= access_aa64_tid3
,
7555 { .name
= "MVFR0_EL1", .state
= ARM_CP_STATE_AA64
,
7556 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 3, .opc2
= 0,
7557 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7558 .accessfn
= access_aa64_tid3
,
7559 .resetvalue
= cpu
->isar
.mvfr0
},
7560 { .name
= "MVFR1_EL1", .state
= ARM_CP_STATE_AA64
,
7561 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 3, .opc2
= 1,
7562 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7563 .accessfn
= access_aa64_tid3
,
7564 .resetvalue
= cpu
->isar
.mvfr1
},
7565 { .name
= "MVFR2_EL1", .state
= ARM_CP_STATE_AA64
,
7566 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 3, .opc2
= 2,
7567 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7568 .accessfn
= access_aa64_tid3
,
7569 .resetvalue
= cpu
->isar
.mvfr2
},
7570 { .name
= "MVFR3_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7571 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 3, .opc2
= 3,
7572 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7573 .accessfn
= access_aa64_tid3
,
7575 { .name
= "MVFR4_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7576 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 3, .opc2
= 4,
7577 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7578 .accessfn
= access_aa64_tid3
,
7580 { .name
= "MVFR5_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7581 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 3, .opc2
= 5,
7582 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7583 .accessfn
= access_aa64_tid3
,
7585 { .name
= "MVFR6_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7586 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 3, .opc2
= 6,
7587 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7588 .accessfn
= access_aa64_tid3
,
7590 { .name
= "MVFR7_EL1_RESERVED", .state
= ARM_CP_STATE_AA64
,
7591 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 3, .opc2
= 7,
7592 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7593 .accessfn
= access_aa64_tid3
,
7595 { .name
= "PMCEID0", .state
= ARM_CP_STATE_AA32
,
7596 .cp
= 15, .opc1
= 0, .crn
= 9, .crm
= 12, .opc2
= 6,
7597 .access
= PL0_R
, .accessfn
= pmreg_access
, .type
= ARM_CP_CONST
,
7598 .resetvalue
= extract64(cpu
->pmceid0
, 0, 32) },
7599 { .name
= "PMCEID0_EL0", .state
= ARM_CP_STATE_AA64
,
7600 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 12, .opc2
= 6,
7601 .access
= PL0_R
, .accessfn
= pmreg_access
, .type
= ARM_CP_CONST
,
7602 .resetvalue
= cpu
->pmceid0
},
7603 { .name
= "PMCEID1", .state
= ARM_CP_STATE_AA32
,
7604 .cp
= 15, .opc1
= 0, .crn
= 9, .crm
= 12, .opc2
= 7,
7605 .access
= PL0_R
, .accessfn
= pmreg_access
, .type
= ARM_CP_CONST
,
7606 .resetvalue
= extract64(cpu
->pmceid1
, 0, 32) },
7607 { .name
= "PMCEID1_EL0", .state
= ARM_CP_STATE_AA64
,
7608 .opc0
= 3, .opc1
= 3, .crn
= 9, .crm
= 12, .opc2
= 7,
7609 .access
= PL0_R
, .accessfn
= pmreg_access
, .type
= ARM_CP_CONST
,
7610 .resetvalue
= cpu
->pmceid1
},
7613 #ifdef CONFIG_USER_ONLY
7614 ARMCPRegUserSpaceInfo v8_user_idregs
[] = {
7615 { .name
= "ID_AA64PFR0_EL1",
7616 .exported_bits
= 0x000f000f00ff0000,
7617 .fixed_bits
= 0x0000000000000011 },
7618 { .name
= "ID_AA64PFR1_EL1",
7619 .exported_bits
= 0x00000000000000f0 },
7620 { .name
= "ID_AA64PFR*_EL1_RESERVED",
7622 { .name
= "ID_AA64ZFR0_EL1" },
7623 { .name
= "ID_AA64MMFR0_EL1",
7624 .fixed_bits
= 0x00000000ff000000 },
7625 { .name
= "ID_AA64MMFR1_EL1" },
7626 { .name
= "ID_AA64MMFR*_EL1_RESERVED",
7628 { .name
= "ID_AA64DFR0_EL1",
7629 .fixed_bits
= 0x0000000000000006 },
7630 { .name
= "ID_AA64DFR1_EL1" },
7631 { .name
= "ID_AA64DFR*_EL1_RESERVED",
7633 { .name
= "ID_AA64AFR*",
7635 { .name
= "ID_AA64ISAR0_EL1",
7636 .exported_bits
= 0x00fffffff0fffff0 },
7637 { .name
= "ID_AA64ISAR1_EL1",
7638 .exported_bits
= 0x000000f0ffffffff },
7639 { .name
= "ID_AA64ISAR*_EL1_RESERVED",
7641 REGUSERINFO_SENTINEL
7643 modify_arm_cp_regs(v8_idregs
, v8_user_idregs
);
7645 /* RVBAR_EL1 is only implemented if EL1 is the highest EL */
7646 if (!arm_feature(env
, ARM_FEATURE_EL3
) &&
7647 !arm_feature(env
, ARM_FEATURE_EL2
)) {
7648 ARMCPRegInfo rvbar
= {
7649 .name
= "RVBAR_EL1", .state
= ARM_CP_STATE_AA64
,
7650 .opc0
= 3, .opc1
= 0, .crn
= 12, .crm
= 0, .opc2
= 1,
7651 .type
= ARM_CP_CONST
, .access
= PL1_R
, .resetvalue
= cpu
->rvbar
7653 define_one_arm_cp_reg(cpu
, &rvbar
);
7655 define_arm_cp_regs(cpu
, v8_idregs
);
7656 define_arm_cp_regs(cpu
, v8_cp_reginfo
);
7658 if (arm_feature(env
, ARM_FEATURE_EL2
)) {
7659 uint64_t vmpidr_def
= mpidr_read_val(env
);
7660 ARMCPRegInfo vpidr_regs
[] = {
7661 { .name
= "VPIDR", .state
= ARM_CP_STATE_AA32
,
7662 .cp
= 15, .opc1
= 4, .crn
= 0, .crm
= 0, .opc2
= 0,
7663 .access
= PL2_RW
, .accessfn
= access_el3_aa32ns
,
7664 .resetvalue
= cpu
->midr
, .type
= ARM_CP_ALIAS
,
7665 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.vpidr_el2
) },
7666 { .name
= "VPIDR_EL2", .state
= ARM_CP_STATE_AA64
,
7667 .opc0
= 3, .opc1
= 4, .crn
= 0, .crm
= 0, .opc2
= 0,
7668 .access
= PL2_RW
, .resetvalue
= cpu
->midr
,
7669 .fieldoffset
= offsetof(CPUARMState
, cp15
.vpidr_el2
) },
7670 { .name
= "VMPIDR", .state
= ARM_CP_STATE_AA32
,
7671 .cp
= 15, .opc1
= 4, .crn
= 0, .crm
= 0, .opc2
= 5,
7672 .access
= PL2_RW
, .accessfn
= access_el3_aa32ns
,
7673 .resetvalue
= vmpidr_def
, .type
= ARM_CP_ALIAS
,
7674 .fieldoffset
= offsetoflow32(CPUARMState
, cp15
.vmpidr_el2
) },
7675 { .name
= "VMPIDR_EL2", .state
= ARM_CP_STATE_AA64
,
7676 .opc0
= 3, .opc1
= 4, .crn
= 0, .crm
= 0, .opc2
= 5,
7678 .resetvalue
= vmpidr_def
,
7679 .fieldoffset
= offsetof(CPUARMState
, cp15
.vmpidr_el2
) },
7682 define_arm_cp_regs(cpu
, vpidr_regs
);
7683 define_arm_cp_regs(cpu
, el2_cp_reginfo
);
7684 if (arm_feature(env
, ARM_FEATURE_V8
)) {
7685 define_arm_cp_regs(cpu
, el2_v8_cp_reginfo
);
7687 /* RVBAR_EL2 is only implemented if EL2 is the highest EL */
7688 if (!arm_feature(env
, ARM_FEATURE_EL3
)) {
7689 ARMCPRegInfo rvbar
= {
7690 .name
= "RVBAR_EL2", .state
= ARM_CP_STATE_AA64
,
7691 .opc0
= 3, .opc1
= 4, .crn
= 12, .crm
= 0, .opc2
= 1,
7692 .type
= ARM_CP_CONST
, .access
= PL2_R
, .resetvalue
= cpu
->rvbar
7694 define_one_arm_cp_reg(cpu
, &rvbar
);
7697 /* If EL2 is missing but higher ELs are enabled, we need to
7698 * register the no_el2 reginfos.
7700 if (arm_feature(env
, ARM_FEATURE_EL3
)) {
7701 /* When EL3 exists but not EL2, VPIDR and VMPIDR take the value
7702 * of MIDR_EL1 and MPIDR_EL1.
7704 ARMCPRegInfo vpidr_regs
[] = {
7705 { .name
= "VPIDR_EL2", .state
= ARM_CP_STATE_BOTH
,
7706 .opc0
= 3, .opc1
= 4, .crn
= 0, .crm
= 0, .opc2
= 0,
7707 .access
= PL2_RW
, .accessfn
= access_el3_aa32ns
,
7708 .type
= ARM_CP_CONST
, .resetvalue
= cpu
->midr
,
7709 .fieldoffset
= offsetof(CPUARMState
, cp15
.vpidr_el2
) },
7710 { .name
= "VMPIDR_EL2", .state
= ARM_CP_STATE_BOTH
,
7711 .opc0
= 3, .opc1
= 4, .crn
= 0, .crm
= 0, .opc2
= 5,
7712 .access
= PL2_RW
, .accessfn
= access_el3_aa32ns
,
7713 .type
= ARM_CP_NO_RAW
,
7714 .writefn
= arm_cp_write_ignore
, .readfn
= mpidr_read
},
7717 define_arm_cp_regs(cpu
, vpidr_regs
);
7718 define_arm_cp_regs(cpu
, el3_no_el2_cp_reginfo
);
7719 if (arm_feature(env
, ARM_FEATURE_V8
)) {
7720 define_arm_cp_regs(cpu
, el3_no_el2_v8_cp_reginfo
);
7724 if (arm_feature(env
, ARM_FEATURE_EL3
)) {
7725 define_arm_cp_regs(cpu
, el3_cp_reginfo
);
7726 ARMCPRegInfo el3_regs
[] = {
7727 { .name
= "RVBAR_EL3", .state
= ARM_CP_STATE_AA64
,
7728 .opc0
= 3, .opc1
= 6, .crn
= 12, .crm
= 0, .opc2
= 1,
7729 .type
= ARM_CP_CONST
, .access
= PL3_R
, .resetvalue
= cpu
->rvbar
},
7730 { .name
= "SCTLR_EL3", .state
= ARM_CP_STATE_AA64
,
7731 .opc0
= 3, .opc1
= 6, .crn
= 1, .crm
= 0, .opc2
= 0,
7733 .raw_writefn
= raw_write
, .writefn
= sctlr_write
,
7734 .fieldoffset
= offsetof(CPUARMState
, cp15
.sctlr_el
[3]),
7735 .resetvalue
= cpu
->reset_sctlr
},
7739 define_arm_cp_regs(cpu
, el3_regs
);
7741 /* The behaviour of NSACR is sufficiently various that we don't
7742 * try to describe it in a single reginfo:
7743 * if EL3 is 64 bit, then trap to EL3 from S EL1,
7744 * reads as constant 0xc00 from NS EL1 and NS EL2
7745 * if EL3 is 32 bit, then RW at EL3, RO at NS EL1 and NS EL2
7746 * if v7 without EL3, register doesn't exist
7747 * if v8 without EL3, reads as constant 0xc00 from NS EL1 and NS EL2
7749 if (arm_feature(env
, ARM_FEATURE_EL3
)) {
7750 if (arm_feature(env
, ARM_FEATURE_AARCH64
)) {
7751 ARMCPRegInfo nsacr
= {
7752 .name
= "NSACR", .type
= ARM_CP_CONST
,
7753 .cp
= 15, .opc1
= 0, .crn
= 1, .crm
= 1, .opc2
= 2,
7754 .access
= PL1_RW
, .accessfn
= nsacr_access
,
7757 define_one_arm_cp_reg(cpu
, &nsacr
);
7759 ARMCPRegInfo nsacr
= {
7761 .cp
= 15, .opc1
= 0, .crn
= 1, .crm
= 1, .opc2
= 2,
7762 .access
= PL3_RW
| PL1_R
,
7764 .fieldoffset
= offsetof(CPUARMState
, cp15
.nsacr
)
7766 define_one_arm_cp_reg(cpu
, &nsacr
);
7769 if (arm_feature(env
, ARM_FEATURE_V8
)) {
7770 ARMCPRegInfo nsacr
= {
7771 .name
= "NSACR", .type
= ARM_CP_CONST
,
7772 .cp
= 15, .opc1
= 0, .crn
= 1, .crm
= 1, .opc2
= 2,
7776 define_one_arm_cp_reg(cpu
, &nsacr
);
7780 if (arm_feature(env
, ARM_FEATURE_PMSA
)) {
7781 if (arm_feature(env
, ARM_FEATURE_V6
)) {
7782 /* PMSAv6 not implemented */
7783 assert(arm_feature(env
, ARM_FEATURE_V7
));
7784 define_arm_cp_regs(cpu
, vmsa_pmsa_cp_reginfo
);
7785 define_arm_cp_regs(cpu
, pmsav7_cp_reginfo
);
7787 define_arm_cp_regs(cpu
, pmsav5_cp_reginfo
);
7790 define_arm_cp_regs(cpu
, vmsa_pmsa_cp_reginfo
);
7791 define_arm_cp_regs(cpu
, vmsa_cp_reginfo
);
7792 /* TTCBR2 is introduced with ARMv8.2-AA32HPD. */
7793 if (cpu_isar_feature(aa32_hpd
, cpu
)) {
7794 define_one_arm_cp_reg(cpu
, &ttbcr2_reginfo
);
7797 if (arm_feature(env
, ARM_FEATURE_THUMB2EE
)) {
7798 define_arm_cp_regs(cpu
, t2ee_cp_reginfo
);
7800 if (arm_feature(env
, ARM_FEATURE_GENERIC_TIMER
)) {
7801 define_arm_cp_regs(cpu
, generic_timer_cp_reginfo
);
7803 if (arm_feature(env
, ARM_FEATURE_VAPA
)) {
7804 define_arm_cp_regs(cpu
, vapa_cp_reginfo
);
7806 if (arm_feature(env
, ARM_FEATURE_CACHE_TEST_CLEAN
)) {
7807 define_arm_cp_regs(cpu
, cache_test_clean_cp_reginfo
);
7809 if (arm_feature(env
, ARM_FEATURE_CACHE_DIRTY_REG
)) {
7810 define_arm_cp_regs(cpu
, cache_dirty_status_cp_reginfo
);
7812 if (arm_feature(env
, ARM_FEATURE_CACHE_BLOCK_OPS
)) {
7813 define_arm_cp_regs(cpu
, cache_block_ops_cp_reginfo
);
7815 if (arm_feature(env
, ARM_FEATURE_OMAPCP
)) {
7816 define_arm_cp_regs(cpu
, omap_cp_reginfo
);
7818 if (arm_feature(env
, ARM_FEATURE_STRONGARM
)) {
7819 define_arm_cp_regs(cpu
, strongarm_cp_reginfo
);
7821 if (arm_feature(env
, ARM_FEATURE_XSCALE
)) {
7822 define_arm_cp_regs(cpu
, xscale_cp_reginfo
);
7824 if (arm_feature(env
, ARM_FEATURE_DUMMY_C15_REGS
)) {
7825 define_arm_cp_regs(cpu
, dummy_c15_cp_reginfo
);
7827 if (arm_feature(env
, ARM_FEATURE_LPAE
)) {
7828 define_arm_cp_regs(cpu
, lpae_cp_reginfo
);
7830 if (cpu_isar_feature(aa32_jazelle
, cpu
)) {
7831 define_arm_cp_regs(cpu
, jazelle_regs
);
7833 /* Slightly awkwardly, the OMAP and StrongARM cores need all of
7834 * cp15 crn=0 to be writes-ignored, whereas for other cores they should
7835 * be read-only (ie write causes UNDEF exception).
7838 ARMCPRegInfo id_pre_v8_midr_cp_reginfo
[] = {
7839 /* Pre-v8 MIDR space.
7840 * Note that the MIDR isn't a simple constant register because
7841 * of the TI925 behaviour where writes to another register can
7842 * cause the MIDR value to change.
7844 * Unimplemented registers in the c15 0 0 0 space default to
7845 * MIDR. Define MIDR first as this entire space, then CTR, TCMTR
7846 * and friends override accordingly.
7849 .cp
= 15, .crn
= 0, .crm
= 0, .opc1
= 0, .opc2
= CP_ANY
,
7850 .access
= PL1_R
, .resetvalue
= cpu
->midr
,
7851 .writefn
= arm_cp_write_ignore
, .raw_writefn
= raw_write
,
7852 .readfn
= midr_read
,
7853 .fieldoffset
= offsetof(CPUARMState
, cp15
.c0_cpuid
),
7854 .type
= ARM_CP_OVERRIDE
},
7855 /* crn = 0 op1 = 0 crm = 3..7 : currently unassigned; we RAZ. */
7857 .cp
= 15, .crn
= 0, .crm
= 3, .opc1
= 0, .opc2
= CP_ANY
,
7858 .access
= PL1_R
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
7860 .cp
= 15, .crn
= 0, .crm
= 4, .opc1
= 0, .opc2
= CP_ANY
,
7861 .access
= PL1_R
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
7863 .cp
= 15, .crn
= 0, .crm
= 5, .opc1
= 0, .opc2
= CP_ANY
,
7864 .access
= PL1_R
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
7866 .cp
= 15, .crn
= 0, .crm
= 6, .opc1
= 0, .opc2
= CP_ANY
,
7867 .access
= PL1_R
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
7869 .cp
= 15, .crn
= 0, .crm
= 7, .opc1
= 0, .opc2
= CP_ANY
,
7870 .access
= PL1_R
, .type
= ARM_CP_CONST
, .resetvalue
= 0 },
7873 ARMCPRegInfo id_v8_midr_cp_reginfo
[] = {
7874 { .name
= "MIDR_EL1", .state
= ARM_CP_STATE_BOTH
,
7875 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 0, .opc2
= 0,
7876 .access
= PL1_R
, .type
= ARM_CP_NO_RAW
, .resetvalue
= cpu
->midr
,
7877 .fieldoffset
= offsetof(CPUARMState
, cp15
.c0_cpuid
),
7878 .readfn
= midr_read
},
7879 /* crn = 0 op1 = 0 crm = 0 op2 = 4,7 : AArch32 aliases of MIDR */
7880 { .name
= "MIDR", .type
= ARM_CP_ALIAS
| ARM_CP_CONST
,
7881 .cp
= 15, .crn
= 0, .crm
= 0, .opc1
= 0, .opc2
= 4,
7882 .access
= PL1_R
, .resetvalue
= cpu
->midr
},
7883 { .name
= "MIDR", .type
= ARM_CP_ALIAS
| ARM_CP_CONST
,
7884 .cp
= 15, .crn
= 0, .crm
= 0, .opc1
= 0, .opc2
= 7,
7885 .access
= PL1_R
, .resetvalue
= cpu
->midr
},
7886 { .name
= "REVIDR_EL1", .state
= ARM_CP_STATE_BOTH
,
7887 .opc0
= 3, .opc1
= 0, .crn
= 0, .crm
= 0, .opc2
= 6,
7889 .accessfn
= access_aa64_tid1
,
7890 .type
= ARM_CP_CONST
, .resetvalue
= cpu
->revidr
},
7893 ARMCPRegInfo id_cp_reginfo
[] = {
7894 /* These are common to v8 and pre-v8 */
7896 .cp
= 15, .crn
= 0, .crm
= 0, .opc1
= 0, .opc2
= 1,
7897 .access
= PL1_R
, .accessfn
= ctr_el0_access
,
7898 .type
= ARM_CP_CONST
, .resetvalue
= cpu
->ctr
},
7899 { .name
= "CTR_EL0", .state
= ARM_CP_STATE_AA64
,
7900 .opc0
= 3, .opc1
= 3, .opc2
= 1, .crn
= 0, .crm
= 0,
7901 .access
= PL0_R
, .accessfn
= ctr_el0_access
,
7902 .type
= ARM_CP_CONST
, .resetvalue
= cpu
->ctr
},
7903 /* TCMTR and TLBTR exist in v8 but have no 64-bit versions */
7905 .cp
= 15, .crn
= 0, .crm
= 0, .opc1
= 0, .opc2
= 2,
7907 .accessfn
= access_aa32_tid1
,
7908 .type
= ARM_CP_CONST
, .resetvalue
= 0 },
7911 /* TLBTR is specific to VMSA */
7912 ARMCPRegInfo id_tlbtr_reginfo
= {
7914 .cp
= 15, .crn
= 0, .crm
= 0, .opc1
= 0, .opc2
= 3,
7916 .accessfn
= access_aa32_tid1
,
7917 .type
= ARM_CP_CONST
, .resetvalue
= 0,
7919 /* MPUIR is specific to PMSA V6+ */
7920 ARMCPRegInfo id_mpuir_reginfo
= {
7922 .cp
= 15, .crn
= 0, .crm
= 0, .opc1
= 0, .opc2
= 4,
7923 .access
= PL1_R
, .type
= ARM_CP_CONST
,
7924 .resetvalue
= cpu
->pmsav7_dregion
<< 8
7926 ARMCPRegInfo crn0_wi_reginfo
= {
7927 .name
= "CRN0_WI", .cp
= 15, .crn
= 0, .crm
= CP_ANY
,
7928 .opc1
= CP_ANY
, .opc2
= CP_ANY
, .access
= PL1_W
,
7929 .type
= ARM_CP_NOP
| ARM_CP_OVERRIDE
7931 #ifdef CONFIG_USER_ONLY
7932 ARMCPRegUserSpaceInfo id_v8_user_midr_cp_reginfo
[] = {
7933 { .name
= "MIDR_EL1",
7934 .exported_bits
= 0x00000000ffffffff },
7935 { .name
= "REVIDR_EL1" },
7936 REGUSERINFO_SENTINEL
7938 modify_arm_cp_regs(id_v8_midr_cp_reginfo
, id_v8_user_midr_cp_reginfo
);
7940 if (arm_feature(env
, ARM_FEATURE_OMAPCP
) ||
7941 arm_feature(env
, ARM_FEATURE_STRONGARM
)) {
7943 /* Register the blanket "writes ignored" value first to cover the
7944 * whole space. Then update the specific ID registers to allow write
7945 * access, so that they ignore writes rather than causing them to
7948 define_one_arm_cp_reg(cpu
, &crn0_wi_reginfo
);
7949 for (r
= id_pre_v8_midr_cp_reginfo
;
7950 r
->type
!= ARM_CP_SENTINEL
; r
++) {
7953 for (r
= id_cp_reginfo
; r
->type
!= ARM_CP_SENTINEL
; r
++) {
7956 id_mpuir_reginfo
.access
= PL1_RW
;
7957 id_tlbtr_reginfo
.access
= PL1_RW
;
7959 if (arm_feature(env
, ARM_FEATURE_V8
)) {
7960 define_arm_cp_regs(cpu
, id_v8_midr_cp_reginfo
);
7962 define_arm_cp_regs(cpu
, id_pre_v8_midr_cp_reginfo
);
7964 define_arm_cp_regs(cpu
, id_cp_reginfo
);
7965 if (!arm_feature(env
, ARM_FEATURE_PMSA
)) {
7966 define_one_arm_cp_reg(cpu
, &id_tlbtr_reginfo
);
7967 } else if (arm_feature(env
, ARM_FEATURE_V7
)) {
7968 define_one_arm_cp_reg(cpu
, &id_mpuir_reginfo
);
7972 if (arm_feature(env
, ARM_FEATURE_MPIDR
)) {
7973 ARMCPRegInfo mpidr_cp_reginfo
[] = {
7974 { .name
= "MPIDR_EL1", .state
= ARM_CP_STATE_BOTH
,
7975 .opc0
= 3, .crn
= 0, .crm
= 0, .opc1
= 0, .opc2
= 5,
7976 .access
= PL1_R
, .readfn
= mpidr_read
, .type
= ARM_CP_NO_RAW
},
7979 #ifdef CONFIG_USER_ONLY
7980 ARMCPRegUserSpaceInfo mpidr_user_cp_reginfo
[] = {
7981 { .name
= "MPIDR_EL1",
7982 .fixed_bits
= 0x0000000080000000 },
7983 REGUSERINFO_SENTINEL
7985 modify_arm_cp_regs(mpidr_cp_reginfo
, mpidr_user_cp_reginfo
);
7987 define_arm_cp_regs(cpu
, mpidr_cp_reginfo
);
7990 if (arm_feature(env
, ARM_FEATURE_AUXCR
)) {
7991 ARMCPRegInfo auxcr_reginfo
[] = {
7992 { .name
= "ACTLR_EL1", .state
= ARM_CP_STATE_BOTH
,
7993 .opc0
= 3, .opc1
= 0, .crn
= 1, .crm
= 0, .opc2
= 1,
7994 .access
= PL1_RW
, .accessfn
= access_tacr
,
7995 .type
= ARM_CP_CONST
, .resetvalue
= cpu
->reset_auxcr
},
7996 { .name
= "ACTLR_EL2", .state
= ARM_CP_STATE_BOTH
,
7997 .opc0
= 3, .opc1
= 4, .crn
= 1, .crm
= 0, .opc2
= 1,
7998 .access
= PL2_RW
, .type
= ARM_CP_CONST
,
8000 { .name
= "ACTLR_EL3", .state
= ARM_CP_STATE_AA64
,
8001 .opc0
= 3, .opc1
= 6, .crn
= 1, .crm
= 0, .opc2
= 1,
8002 .access
= PL3_RW
, .type
= ARM_CP_CONST
,
8006 define_arm_cp_regs(cpu
, auxcr_reginfo
);
8007 if (cpu_isar_feature(aa32_ac2
, cpu
)) {
8008 define_arm_cp_regs(cpu
, actlr2_hactlr2_reginfo
);
8012 if (arm_feature(env
, ARM_FEATURE_CBAR
)) {
8014 * CBAR is IMPDEF, but common on Arm Cortex-A implementations.
8015 * There are two flavours:
8016 * (1) older 32-bit only cores have a simple 32-bit CBAR
8017 * (2) 64-bit cores have a 64-bit CBAR visible to AArch64, plus a
8018 * 32-bit register visible to AArch32 at a different encoding
8019 * to the "flavour 1" register and with the bits rearranged to
8020 * be able to squash a 64-bit address into the 32-bit view.
8021 * We distinguish the two via the ARM_FEATURE_AARCH64 flag, but
8022 * in future if we support AArch32-only configs of some of the
8023 * AArch64 cores we might need to add a specific feature flag
8024 * to indicate cores with "flavour 2" CBAR.
8026 if (arm_feature(env
, ARM_FEATURE_AARCH64
)) {
8027 /* 32 bit view is [31:18] 0...0 [43:32]. */
8028 uint32_t cbar32
= (extract64(cpu
->reset_cbar
, 18, 14) << 18)
8029 | extract64(cpu
->reset_cbar
, 32, 12);
8030 ARMCPRegInfo cbar_reginfo
[] = {
8032 .type
= ARM_CP_CONST
,
8033 .cp
= 15, .crn
= 15, .crm
= 3, .opc1
= 1, .opc2
= 0,
8034 .access
= PL1_R
, .resetvalue
= cbar32
},
8035 { .name
= "CBAR_EL1", .state
= ARM_CP_STATE_AA64
,
8036 .type
= ARM_CP_CONST
,
8037 .opc0
= 3, .opc1
= 1, .crn
= 15, .crm
= 3, .opc2
= 0,
8038 .access
= PL1_R
, .resetvalue
= cpu
->reset_cbar
},
8041 /* We don't implement a r/w 64 bit CBAR currently */
8042 assert(arm_feature(env
, ARM_FEATURE_CBAR_RO
));
8043 define_arm_cp_regs(cpu
, cbar_reginfo
);
8045 ARMCPRegInfo cbar
= {
8047 .cp
= 15, .crn
= 15, .crm
= 0, .opc1
= 4, .opc2
= 0,
8048 .access
= PL1_R
|PL3_W
, .resetvalue
= cpu
->reset_cbar
,
8049 .fieldoffset
= offsetof(CPUARMState
,
8050 cp15
.c15_config_base_address
)
8052 if (arm_feature(env
, ARM_FEATURE_CBAR_RO
)) {
8053 cbar
.access
= PL1_R
;
8054 cbar
.fieldoffset
= 0;
8055 cbar
.type
= ARM_CP_CONST
;
8057 define_one_arm_cp_reg(cpu
, &cbar
);
8061 if (arm_feature(env
, ARM_FEATURE_VBAR
)) {
8062 ARMCPRegInfo vbar_cp_reginfo
[] = {
8063 { .name
= "VBAR", .state
= ARM_CP_STATE_BOTH
,
8064 .opc0
= 3, .crn
= 12, .crm
= 0, .opc1
= 0, .opc2
= 0,
8065 .access
= PL1_RW
, .writefn
= vbar_write
,
8066 .bank_fieldoffsets
= { offsetof(CPUARMState
, cp15
.vbar_s
),
8067 offsetof(CPUARMState
, cp15
.vbar_ns
) },
8071 define_arm_cp_regs(cpu
, vbar_cp_reginfo
);
8074 /* Generic registers whose values depend on the implementation */
8076 ARMCPRegInfo sctlr
= {
8077 .name
= "SCTLR", .state
= ARM_CP_STATE_BOTH
,
8078 .opc0
= 3, .opc1
= 0, .crn
= 1, .crm
= 0, .opc2
= 0,
8079 .access
= PL1_RW
, .accessfn
= access_tvm_trvm
,
8080 .bank_fieldoffsets
= { offsetof(CPUARMState
, cp15
.sctlr_s
),
8081 offsetof(CPUARMState
, cp15
.sctlr_ns
) },
8082 .writefn
= sctlr_write
, .resetvalue
= cpu
->reset_sctlr
,
8083 .raw_writefn
= raw_write
,
8085 if (arm_feature(env
, ARM_FEATURE_XSCALE
)) {
8086 /* Normally we would always end the TB on an SCTLR write, but Linux
8087 * arch/arm/mach-pxa/sleep.S expects two instructions following
8088 * an MMU enable to execute from cache. Imitate this behaviour.
8090 sctlr
.type
|= ARM_CP_SUPPRESS_TB_END
;
8092 define_one_arm_cp_reg(cpu
, &sctlr
);
8095 if (cpu_isar_feature(aa64_lor
, cpu
)) {
8096 define_arm_cp_regs(cpu
, lor_reginfo
);
8098 if (cpu_isar_feature(aa64_pan
, cpu
)) {
8099 define_one_arm_cp_reg(cpu
, &pan_reginfo
);
8101 #ifndef CONFIG_USER_ONLY
8102 if (cpu_isar_feature(aa64_ats1e1
, cpu
)) {
8103 define_arm_cp_regs(cpu
, ats1e1_reginfo
);
8105 if (cpu_isar_feature(aa32_ats1e1
, cpu
)) {
8106 define_arm_cp_regs(cpu
, ats1cp_reginfo
);
8109 if (cpu_isar_feature(aa64_uao
, cpu
)) {
8110 define_one_arm_cp_reg(cpu
, &uao_reginfo
);
8113 if (arm_feature(env
, ARM_FEATURE_EL2
) && cpu_isar_feature(aa64_vh
, cpu
)) {
8114 define_arm_cp_regs(cpu
, vhe_reginfo
);
8117 if (cpu_isar_feature(aa64_sve
, cpu
)) {
8118 define_one_arm_cp_reg(cpu
, &zcr_el1_reginfo
);
8119 if (arm_feature(env
, ARM_FEATURE_EL2
)) {
8120 define_one_arm_cp_reg(cpu
, &zcr_el2_reginfo
);
8122 define_one_arm_cp_reg(cpu
, &zcr_no_el2_reginfo
);
8124 if (arm_feature(env
, ARM_FEATURE_EL3
)) {
8125 define_one_arm_cp_reg(cpu
, &zcr_el3_reginfo
);
8129 #ifdef TARGET_AARCH64
8130 if (cpu_isar_feature(aa64_pauth
, cpu
)) {
8131 define_arm_cp_regs(cpu
, pauth_reginfo
);
8133 if (cpu_isar_feature(aa64_rndr
, cpu
)) {
8134 define_arm_cp_regs(cpu
, rndr_reginfo
);
8136 #ifndef CONFIG_USER_ONLY
8137 /* Data Cache clean instructions up to PoP */
8138 if (cpu_isar_feature(aa64_dcpop
, cpu
)) {
8139 define_one_arm_cp_reg(cpu
, dcpop_reg
);
8141 if (cpu_isar_feature(aa64_dcpodp
, cpu
)) {
8142 define_one_arm_cp_reg(cpu
, dcpodp_reg
);
8145 #endif /*CONFIG_USER_ONLY*/
8148 * If full MTE is enabled, add all of the system registers.
8149 * If only "instructions available at EL0" are enabled,
8150 * then define only a RAZ/WI version of PSTATE.TCO.
8152 if (cpu_isar_feature(aa64_mte
, cpu
)) {
8153 define_arm_cp_regs(cpu
, mte_reginfo
);
8154 define_arm_cp_regs(cpu
, mte_el0_cacheop_reginfo
);
8155 } else if (cpu_isar_feature(aa64_mte_insn_reg
, cpu
)) {
8156 define_arm_cp_regs(cpu
, mte_tco_ro_reginfo
);
8157 define_arm_cp_regs(cpu
, mte_el0_cacheop_reginfo
);
8161 if (cpu_isar_feature(any_predinv
, cpu
)) {
8162 define_arm_cp_regs(cpu
, predinv_reginfo
);
8165 if (cpu_isar_feature(any_ccidx
, cpu
)) {
8166 define_arm_cp_regs(cpu
, ccsidr2_reginfo
);
8169 #ifndef CONFIG_USER_ONLY
8171 * Register redirections and aliases must be done last,
8172 * after the registers from the other extensions have been defined.
8174 if (arm_feature(env
, ARM_FEATURE_EL2
) && cpu_isar_feature(aa64_vh
, cpu
)) {
8175 define_arm_vh_e2h_redirects_aliases(cpu
);
8180 void arm_cpu_register_gdb_regs_for_features(ARMCPU
*cpu
)
8182 CPUState
*cs
= CPU(cpu
);
8183 CPUARMState
*env
= &cpu
->env
;
8185 if (arm_feature(env
, ARM_FEATURE_AARCH64
)) {
8187 * The lower part of each SVE register aliases to the FPU
8188 * registers so we don't need to include both.
8190 #ifdef TARGET_AARCH64
8191 if (isar_feature_aa64_sve(&cpu
->isar
)) {
8192 gdb_register_coprocessor(cs
, arm_gdb_get_svereg
, arm_gdb_set_svereg
,
8193 arm_gen_dynamic_svereg_xml(cs
, cs
->gdb_num_regs
),
8194 "sve-registers.xml", 0);
8198 gdb_register_coprocessor(cs
, aarch64_fpu_gdb_get_reg
,
8199 aarch64_fpu_gdb_set_reg
,
8200 34, "aarch64-fpu.xml", 0);
8202 } else if (arm_feature(env
, ARM_FEATURE_NEON
)) {
8203 gdb_register_coprocessor(cs
, vfp_gdb_get_reg
, vfp_gdb_set_reg
,
8204 51, "arm-neon.xml", 0);
8205 } else if (cpu_isar_feature(aa32_simd_r32
, cpu
)) {
8206 gdb_register_coprocessor(cs
, vfp_gdb_get_reg
, vfp_gdb_set_reg
,
8207 35, "arm-vfp3.xml", 0);
8208 } else if (cpu_isar_feature(aa32_vfp_simd
, cpu
)) {
8209 gdb_register_coprocessor(cs
, vfp_gdb_get_reg
, vfp_gdb_set_reg
,
8210 19, "arm-vfp.xml", 0);
8212 gdb_register_coprocessor(cs
, arm_gdb_get_sysreg
, arm_gdb_set_sysreg
,
8213 arm_gen_dynamic_sysreg_xml(cs
, cs
->gdb_num_regs
),
8214 "system-registers.xml", 0);
8218 /* Sort alphabetically by type name, except for "any". */
8219 static gint
arm_cpu_list_compare(gconstpointer a
, gconstpointer b
)
8221 ObjectClass
*class_a
= (ObjectClass
*)a
;
8222 ObjectClass
*class_b
= (ObjectClass
*)b
;
8223 const char *name_a
, *name_b
;
8225 name_a
= object_class_get_name(class_a
);
8226 name_b
= object_class_get_name(class_b
);
8227 if (strcmp(name_a
, "any-" TYPE_ARM_CPU
) == 0) {
8229 } else if (strcmp(name_b
, "any-" TYPE_ARM_CPU
) == 0) {
8232 return strcmp(name_a
, name_b
);
8236 static void arm_cpu_list_entry(gpointer data
, gpointer user_data
)
8238 ObjectClass
*oc
= data
;
8239 const char *typename
;
8242 typename
= object_class_get_name(oc
);
8243 name
= g_strndup(typename
, strlen(typename
) - strlen("-" TYPE_ARM_CPU
));
8244 qemu_printf(" %s\n", name
);
8248 void arm_cpu_list(void)
8252 list
= object_class_get_list(TYPE_ARM_CPU
, false);
8253 list
= g_slist_sort(list
, arm_cpu_list_compare
);
8254 qemu_printf("Available CPUs:\n");
8255 g_slist_foreach(list
, arm_cpu_list_entry
, NULL
);
8259 static void arm_cpu_add_definition(gpointer data
, gpointer user_data
)
8261 ObjectClass
*oc
= data
;
8262 CpuDefinitionInfoList
**cpu_list
= user_data
;
8263 CpuDefinitionInfoList
*entry
;
8264 CpuDefinitionInfo
*info
;
8265 const char *typename
;
8267 typename
= object_class_get_name(oc
);
8268 info
= g_malloc0(sizeof(*info
));
8269 info
->name
= g_strndup(typename
,
8270 strlen(typename
) - strlen("-" TYPE_ARM_CPU
));
8271 info
->q_typename
= g_strdup(typename
);
8273 entry
= g_malloc0(sizeof(*entry
));
8274 entry
->value
= info
;
8275 entry
->next
= *cpu_list
;
8279 CpuDefinitionInfoList
*qmp_query_cpu_definitions(Error
**errp
)
8281 CpuDefinitionInfoList
*cpu_list
= NULL
;
8284 list
= object_class_get_list(TYPE_ARM_CPU
, false);
8285 g_slist_foreach(list
, arm_cpu_add_definition
, &cpu_list
);
8291 static void add_cpreg_to_hashtable(ARMCPU
*cpu
, const ARMCPRegInfo
*r
,
8292 void *opaque
, int state
, int secstate
,
8293 int crm
, int opc1
, int opc2
,
8296 /* Private utility function for define_one_arm_cp_reg_with_opaque():
8297 * add a single reginfo struct to the hash table.
8299 uint32_t *key
= g_new(uint32_t, 1);
8300 ARMCPRegInfo
*r2
= g_memdup(r
, sizeof(ARMCPRegInfo
));
8301 int is64
= (r
->type
& ARM_CP_64BIT
) ? 1 : 0;
8302 int ns
= (secstate
& ARM_CP_SECSTATE_NS
) ? 1 : 0;
8304 r2
->name
= g_strdup(name
);
8305 /* Reset the secure state to the specific incoming state. This is
8306 * necessary as the register may have been defined with both states.
8308 r2
->secure
= secstate
;
8310 if (r
->bank_fieldoffsets
[0] && r
->bank_fieldoffsets
[1]) {
8311 /* Register is banked (using both entries in array).
8312 * Overwriting fieldoffset as the array is only used to define
8313 * banked registers but later only fieldoffset is used.
8315 r2
->fieldoffset
= r
->bank_fieldoffsets
[ns
];
8318 if (state
== ARM_CP_STATE_AA32
) {
8319 if (r
->bank_fieldoffsets
[0] && r
->bank_fieldoffsets
[1]) {
8320 /* If the register is banked then we don't need to migrate or
8321 * reset the 32-bit instance in certain cases:
8323 * 1) If the register has both 32-bit and 64-bit instances then we
8324 * can count on the 64-bit instance taking care of the
8326 * 2) If ARMv8 is enabled then we can count on a 64-bit version
8327 * taking care of the secure bank. This requires that separate
8328 * 32 and 64-bit definitions are provided.
8330 if ((r
->state
== ARM_CP_STATE_BOTH
&& ns
) ||
8331 (arm_feature(&cpu
->env
, ARM_FEATURE_V8
) && !ns
)) {
8332 r2
->type
|= ARM_CP_ALIAS
;
8334 } else if ((secstate
!= r
->secure
) && !ns
) {
8335 /* The register is not banked so we only want to allow migration of
8336 * the non-secure instance.
8338 r2
->type
|= ARM_CP_ALIAS
;
8341 if (r
->state
== ARM_CP_STATE_BOTH
) {
8342 /* We assume it is a cp15 register if the .cp field is left unset.
8348 #ifdef HOST_WORDS_BIGENDIAN
8349 if (r2
->fieldoffset
) {
8350 r2
->fieldoffset
+= sizeof(uint32_t);
8355 if (state
== ARM_CP_STATE_AA64
) {
8356 /* To allow abbreviation of ARMCPRegInfo
8357 * definitions, we treat cp == 0 as equivalent to
8358 * the value for "standard guest-visible sysreg".
8359 * STATE_BOTH definitions are also always "standard
8360 * sysreg" in their AArch64 view (the .cp value may
8361 * be non-zero for the benefit of the AArch32 view).
8363 if (r
->cp
== 0 || r
->state
== ARM_CP_STATE_BOTH
) {
8364 r2
->cp
= CP_REG_ARM64_SYSREG_CP
;
8366 *key
= ENCODE_AA64_CP_REG(r2
->cp
, r2
->crn
, crm
,
8367 r2
->opc0
, opc1
, opc2
);
8369 *key
= ENCODE_CP_REG(r2
->cp
, is64
, ns
, r2
->crn
, crm
, opc1
, opc2
);
8372 r2
->opaque
= opaque
;
8374 /* reginfo passed to helpers is correct for the actual access,
8375 * and is never ARM_CP_STATE_BOTH:
8378 /* Make sure reginfo passed to helpers for wildcarded regs
8379 * has the correct crm/opc1/opc2 for this reg, not CP_ANY:
8384 /* By convention, for wildcarded registers only the first
8385 * entry is used for migration; the others are marked as
8386 * ALIAS so we don't try to transfer the register
8387 * multiple times. Special registers (ie NOP/WFI) are
8388 * never migratable and not even raw-accessible.
8390 if ((r
->type
& ARM_CP_SPECIAL
)) {
8391 r2
->type
|= ARM_CP_NO_RAW
;
8393 if (((r
->crm
== CP_ANY
) && crm
!= 0) ||
8394 ((r
->opc1
== CP_ANY
) && opc1
!= 0) ||
8395 ((r
->opc2
== CP_ANY
) && opc2
!= 0)) {
8396 r2
->type
|= ARM_CP_ALIAS
| ARM_CP_NO_GDB
;
8399 /* Check that raw accesses are either forbidden or handled. Note that
8400 * we can't assert this earlier because the setup of fieldoffset for
8401 * banked registers has to be done first.
8403 if (!(r2
->type
& ARM_CP_NO_RAW
)) {
8404 assert(!raw_accessors_invalid(r2
));
8407 /* Overriding of an existing definition must be explicitly
8410 if (!(r
->type
& ARM_CP_OVERRIDE
)) {
8411 ARMCPRegInfo
*oldreg
;
8412 oldreg
= g_hash_table_lookup(cpu
->cp_regs
, key
);
8413 if (oldreg
&& !(oldreg
->type
& ARM_CP_OVERRIDE
)) {
8414 fprintf(stderr
, "Register redefined: cp=%d %d bit "
8415 "crn=%d crm=%d opc1=%d opc2=%d, "
8416 "was %s, now %s\n", r2
->cp
, 32 + 32 * is64
,
8417 r2
->crn
, r2
->crm
, r2
->opc1
, r2
->opc2
,
8418 oldreg
->name
, r2
->name
);
8419 g_assert_not_reached();
8422 g_hash_table_insert(cpu
->cp_regs
, key
, r2
);
8426 void define_one_arm_cp_reg_with_opaque(ARMCPU
*cpu
,
8427 const ARMCPRegInfo
*r
, void *opaque
)
8429 /* Define implementations of coprocessor registers.
8430 * We store these in a hashtable because typically
8431 * there are less than 150 registers in a space which
8432 * is 16*16*16*8*8 = 262144 in size.
8433 * Wildcarding is supported for the crm, opc1 and opc2 fields.
8434 * If a register is defined twice then the second definition is
8435 * used, so this can be used to define some generic registers and
8436 * then override them with implementation specific variations.
8437 * At least one of the original and the second definition should
8438 * include ARM_CP_OVERRIDE in its type bits -- this is just a guard
8439 * against accidental use.
8441 * The state field defines whether the register is to be
8442 * visible in the AArch32 or AArch64 execution state. If the
8443 * state is set to ARM_CP_STATE_BOTH then we synthesise a
8444 * reginfo structure for the AArch32 view, which sees the lower
8445 * 32 bits of the 64 bit register.
8447 * Only registers visible in AArch64 may set r->opc0; opc0 cannot
8448 * be wildcarded. AArch64 registers are always considered to be 64
8449 * bits; the ARM_CP_64BIT* flag applies only to the AArch32 view of
8450 * the register, if any.
8452 int crm
, opc1
, opc2
, state
;
8453 int crmmin
= (r
->crm
== CP_ANY
) ? 0 : r
->crm
;
8454 int crmmax
= (r
->crm
== CP_ANY
) ? 15 : r
->crm
;
8455 int opc1min
= (r
->opc1
== CP_ANY
) ? 0 : r
->opc1
;
8456 int opc1max
= (r
->opc1
== CP_ANY
) ? 7 : r
->opc1
;
8457 int opc2min
= (r
->opc2
== CP_ANY
) ? 0 : r
->opc2
;
8458 int opc2max
= (r
->opc2
== CP_ANY
) ? 7 : r
->opc2
;
8459 /* 64 bit registers have only CRm and Opc1 fields */
8460 assert(!((r
->type
& ARM_CP_64BIT
) && (r
->opc2
|| r
->crn
)));
8461 /* op0 only exists in the AArch64 encodings */
8462 assert((r
->state
!= ARM_CP_STATE_AA32
) || (r
->opc0
== 0));
8463 /* AArch64 regs are all 64 bit so ARM_CP_64BIT is meaningless */
8464 assert((r
->state
!= ARM_CP_STATE_AA64
) || !(r
->type
& ARM_CP_64BIT
));
8465 /* The AArch64 pseudocode CheckSystemAccess() specifies that op1
8466 * encodes a minimum access level for the register. We roll this
8467 * runtime check into our general permission check code, so check
8468 * here that the reginfo's specified permissions are strict enough
8469 * to encompass the generic architectural permission check.
8471 if (r
->state
!= ARM_CP_STATE_AA32
) {
8475 /* min_EL EL1, but some accessible to EL0 via kernel ABI */
8476 mask
= PL0U_R
| PL1_RW
;
8496 /* min_EL EL1, secure mode only (we don't check the latter) */
8500 /* broken reginfo with out-of-range opc1 */
8504 /* assert our permissions are not too lax (stricter is fine) */
8505 assert((r
->access
& ~mask
) == 0);
8508 /* Check that the register definition has enough info to handle
8509 * reads and writes if they are permitted.
8511 if (!(r
->type
& (ARM_CP_SPECIAL
|ARM_CP_CONST
))) {
8512 if (r
->access
& PL3_R
) {
8513 assert((r
->fieldoffset
||
8514 (r
->bank_fieldoffsets
[0] && r
->bank_fieldoffsets
[1])) ||
8517 if (r
->access
& PL3_W
) {
8518 assert((r
->fieldoffset
||
8519 (r
->bank_fieldoffsets
[0] && r
->bank_fieldoffsets
[1])) ||
8523 /* Bad type field probably means missing sentinel at end of reg list */
8524 assert(cptype_valid(r
->type
));
8525 for (crm
= crmmin
; crm
<= crmmax
; crm
++) {
8526 for (opc1
= opc1min
; opc1
<= opc1max
; opc1
++) {
8527 for (opc2
= opc2min
; opc2
<= opc2max
; opc2
++) {
8528 for (state
= ARM_CP_STATE_AA32
;
8529 state
<= ARM_CP_STATE_AA64
; state
++) {
8530 if (r
->state
!= state
&& r
->state
!= ARM_CP_STATE_BOTH
) {
8533 if (state
== ARM_CP_STATE_AA32
) {
8534 /* Under AArch32 CP registers can be common
8535 * (same for secure and non-secure world) or banked.
8539 switch (r
->secure
) {
8540 case ARM_CP_SECSTATE_S
:
8541 case ARM_CP_SECSTATE_NS
:
8542 add_cpreg_to_hashtable(cpu
, r
, opaque
, state
,
8543 r
->secure
, crm
, opc1
, opc2
,
8547 name
= g_strdup_printf("%s_S", r
->name
);
8548 add_cpreg_to_hashtable(cpu
, r
, opaque
, state
,
8550 crm
, opc1
, opc2
, name
);
8552 add_cpreg_to_hashtable(cpu
, r
, opaque
, state
,
8554 crm
, opc1
, opc2
, r
->name
);
8558 /* AArch64 registers get mapped to non-secure instance
8560 add_cpreg_to_hashtable(cpu
, r
, opaque
, state
,
8562 crm
, opc1
, opc2
, r
->name
);
8570 void define_arm_cp_regs_with_opaque(ARMCPU
*cpu
,
8571 const ARMCPRegInfo
*regs
, void *opaque
)
8573 /* Define a whole list of registers */
8574 const ARMCPRegInfo
*r
;
8575 for (r
= regs
; r
->type
!= ARM_CP_SENTINEL
; r
++) {
8576 define_one_arm_cp_reg_with_opaque(cpu
, r
, opaque
);
8581 * Modify ARMCPRegInfo for access from userspace.
8583 * This is a data driven modification directed by
8584 * ARMCPRegUserSpaceInfo. All registers become ARM_CP_CONST as
8585 * user-space cannot alter any values and dynamic values pertaining to
8586 * execution state are hidden from user space view anyway.
8588 void modify_arm_cp_regs(ARMCPRegInfo
*regs
, const ARMCPRegUserSpaceInfo
*mods
)
8590 const ARMCPRegUserSpaceInfo
*m
;
8593 for (m
= mods
; m
->name
; m
++) {
8594 GPatternSpec
*pat
= NULL
;
8596 pat
= g_pattern_spec_new(m
->name
);
8598 for (r
= regs
; r
->type
!= ARM_CP_SENTINEL
; r
++) {
8599 if (pat
&& g_pattern_match_string(pat
, r
->name
)) {
8600 r
->type
= ARM_CP_CONST
;
8604 } else if (strcmp(r
->name
, m
->name
) == 0) {
8605 r
->type
= ARM_CP_CONST
;
8607 r
->resetvalue
&= m
->exported_bits
;
8608 r
->resetvalue
|= m
->fixed_bits
;
8613 g_pattern_spec_free(pat
);
8618 const ARMCPRegInfo
*get_arm_cp_reginfo(GHashTable
*cpregs
, uint32_t encoded_cp
)
8620 return g_hash_table_lookup(cpregs
, &encoded_cp
);
8623 void arm_cp_write_ignore(CPUARMState
*env
, const ARMCPRegInfo
*ri
,
8626 /* Helper coprocessor write function for write-ignore registers */
8629 uint64_t arm_cp_read_zero(CPUARMState
*env
, const ARMCPRegInfo
*ri
)
8631 /* Helper coprocessor write function for read-as-zero registers */
8635 void arm_cp_reset_ignore(CPUARMState
*env
, const ARMCPRegInfo
*opaque
)
8637 /* Helper coprocessor reset function for do-nothing-on-reset registers */
8640 static int bad_mode_switch(CPUARMState
*env
, int mode
, CPSRWriteType write_type
)
8642 /* Return true if it is not valid for us to switch to
8643 * this CPU mode (ie all the UNPREDICTABLE cases in
8644 * the ARM ARM CPSRWriteByInstr pseudocode).
8647 /* Changes to or from Hyp via MSR and CPS are illegal. */
8648 if (write_type
== CPSRWriteByInstr
&&
8649 ((env
->uncached_cpsr
& CPSR_M
) == ARM_CPU_MODE_HYP
||
8650 mode
== ARM_CPU_MODE_HYP
)) {
8655 case ARM_CPU_MODE_USR
:
8657 case ARM_CPU_MODE_SYS
:
8658 case ARM_CPU_MODE_SVC
:
8659 case ARM_CPU_MODE_ABT
:
8660 case ARM_CPU_MODE_UND
:
8661 case ARM_CPU_MODE_IRQ
:
8662 case ARM_CPU_MODE_FIQ
:
8663 /* Note that we don't implement the IMPDEF NSACR.RFR which in v7
8664 * allows FIQ mode to be Secure-only. (In v8 this doesn't exist.)
8666 /* If HCR.TGE is set then changes from Monitor to NS PL1 via MSR
8667 * and CPS are treated as illegal mode changes.
8669 if (write_type
== CPSRWriteByInstr
&&
8670 (env
->uncached_cpsr
& CPSR_M
) == ARM_CPU_MODE_MON
&&
8671 (arm_hcr_el2_eff(env
) & HCR_TGE
)) {
8675 case ARM_CPU_MODE_HYP
:
8676 return !arm_feature(env
, ARM_FEATURE_EL2
)
8677 || arm_current_el(env
) < 2 || arm_is_secure_below_el3(env
);
8678 case ARM_CPU_MODE_MON
:
8679 return arm_current_el(env
) < 3;
8685 uint32_t cpsr_read(CPUARMState
*env
)
8688 ZF
= (env
->ZF
== 0);
8689 return env
->uncached_cpsr
| (env
->NF
& 0x80000000) | (ZF
<< 30) |
8690 (env
->CF
<< 29) | ((env
->VF
& 0x80000000) >> 3) | (env
->QF
<< 27)
8691 | (env
->thumb
<< 5) | ((env
->condexec_bits
& 3) << 25)
8692 | ((env
->condexec_bits
& 0xfc) << 8)
8693 | (env
->GE
<< 16) | (env
->daif
& CPSR_AIF
);
8696 void cpsr_write(CPUARMState
*env
, uint32_t val
, uint32_t mask
,
8697 CPSRWriteType write_type
)
8699 uint32_t changed_daif
;
8701 if (mask
& CPSR_NZCV
) {
8702 env
->ZF
= (~val
) & CPSR_Z
;
8704 env
->CF
= (val
>> 29) & 1;
8705 env
->VF
= (val
<< 3) & 0x80000000;
8708 env
->QF
= ((val
& CPSR_Q
) != 0);
8710 env
->thumb
= ((val
& CPSR_T
) != 0);
8711 if (mask
& CPSR_IT_0_1
) {
8712 env
->condexec_bits
&= ~3;
8713 env
->condexec_bits
|= (val
>> 25) & 3;
8715 if (mask
& CPSR_IT_2_7
) {
8716 env
->condexec_bits
&= 3;
8717 env
->condexec_bits
|= (val
>> 8) & 0xfc;
8719 if (mask
& CPSR_GE
) {
8720 env
->GE
= (val
>> 16) & 0xf;
8723 /* In a V7 implementation that includes the security extensions but does
8724 * not include Virtualization Extensions the SCR.FW and SCR.AW bits control
8725 * whether non-secure software is allowed to change the CPSR_F and CPSR_A
8726 * bits respectively.
8728 * In a V8 implementation, it is permitted for privileged software to
8729 * change the CPSR A/F bits regardless of the SCR.AW/FW bits.
8731 if (write_type
!= CPSRWriteRaw
&& !arm_feature(env
, ARM_FEATURE_V8
) &&
8732 arm_feature(env
, ARM_FEATURE_EL3
) &&
8733 !arm_feature(env
, ARM_FEATURE_EL2
) &&
8734 !arm_is_secure(env
)) {
8736 changed_daif
= (env
->daif
^ val
) & mask
;
8738 if (changed_daif
& CPSR_A
) {
8739 /* Check to see if we are allowed to change the masking of async
8740 * abort exceptions from a non-secure state.
8742 if (!(env
->cp15
.scr_el3
& SCR_AW
)) {
8743 qemu_log_mask(LOG_GUEST_ERROR
,
8744 "Ignoring attempt to switch CPSR_A flag from "
8745 "non-secure world with SCR.AW bit clear\n");
8750 if (changed_daif
& CPSR_F
) {
8751 /* Check to see if we are allowed to change the masking of FIQ
8752 * exceptions from a non-secure state.
8754 if (!(env
->cp15
.scr_el3
& SCR_FW
)) {
8755 qemu_log_mask(LOG_GUEST_ERROR
,
8756 "Ignoring attempt to switch CPSR_F flag from "
8757 "non-secure world with SCR.FW bit clear\n");
8761 /* Check whether non-maskable FIQ (NMFI) support is enabled.
8762 * If this bit is set software is not allowed to mask
8763 * FIQs, but is allowed to set CPSR_F to 0.
8765 if ((A32_BANKED_CURRENT_REG_GET(env
, sctlr
) & SCTLR_NMFI
) &&
8767 qemu_log_mask(LOG_GUEST_ERROR
,
8768 "Ignoring attempt to enable CPSR_F flag "
8769 "(non-maskable FIQ [NMFI] support enabled)\n");
8775 env
->daif
&= ~(CPSR_AIF
& mask
);
8776 env
->daif
|= val
& CPSR_AIF
& mask
;
8778 if (write_type
!= CPSRWriteRaw
&&
8779 ((env
->uncached_cpsr
^ val
) & mask
& CPSR_M
)) {
8780 if ((env
->uncached_cpsr
& CPSR_M
) == ARM_CPU_MODE_USR
) {
8781 /* Note that we can only get here in USR mode if this is a
8782 * gdb stub write; for this case we follow the architectural
8783 * behaviour for guest writes in USR mode of ignoring an attempt
8784 * to switch mode. (Those are caught by translate.c for writes
8785 * triggered by guest instructions.)
8788 } else if (bad_mode_switch(env
, val
& CPSR_M
, write_type
)) {
8789 /* Attempt to switch to an invalid mode: this is UNPREDICTABLE in
8790 * v7, and has defined behaviour in v8:
8791 * + leave CPSR.M untouched
8792 * + allow changes to the other CPSR fields
8794 * For user changes via the GDB stub, we don't set PSTATE.IL,
8795 * as this would be unnecessarily harsh for a user error.
8798 if (write_type
!= CPSRWriteByGDBStub
&&
8799 arm_feature(env
, ARM_FEATURE_V8
)) {
8803 qemu_log_mask(LOG_GUEST_ERROR
,
8804 "Illegal AArch32 mode switch attempt from %s to %s\n",
8805 aarch32_mode_name(env
->uncached_cpsr
),
8806 aarch32_mode_name(val
));
8808 qemu_log_mask(CPU_LOG_INT
, "%s %s to %s PC 0x%" PRIx32
"\n",
8809 write_type
== CPSRWriteExceptionReturn
?
8810 "Exception return from AArch32" :
8811 "AArch32 mode switch from",
8812 aarch32_mode_name(env
->uncached_cpsr
),
8813 aarch32_mode_name(val
), env
->regs
[15]);
8814 switch_mode(env
, val
& CPSR_M
);
8817 mask
&= ~CACHED_CPSR_BITS
;
8818 env
->uncached_cpsr
= (env
->uncached_cpsr
& ~mask
) | (val
& mask
);
8821 /* Sign/zero extend */
8822 uint32_t HELPER(sxtb16
)(uint32_t x
)
8825 res
= (uint16_t)(int8_t)x
;
8826 res
|= (uint32_t)(int8_t)(x
>> 16) << 16;
8830 uint32_t HELPER(uxtb16
)(uint32_t x
)
8833 res
= (uint16_t)(uint8_t)x
;
8834 res
|= (uint32_t)(uint8_t)(x
>> 16) << 16;
8838 int32_t HELPER(sdiv
)(int32_t num
, int32_t den
)
8842 if (num
== INT_MIN
&& den
== -1)
8847 uint32_t HELPER(udiv
)(uint32_t num
, uint32_t den
)
8854 uint32_t HELPER(rbit
)(uint32_t x
)
8859 #ifdef CONFIG_USER_ONLY
8861 static void switch_mode(CPUARMState
*env
, int mode
)
8863 ARMCPU
*cpu
= env_archcpu(env
);
8865 if (mode
!= ARM_CPU_MODE_USR
) {
8866 cpu_abort(CPU(cpu
), "Tried to switch out of user mode\n");
8870 uint32_t arm_phys_excp_target_el(CPUState
*cs
, uint32_t excp_idx
,
8871 uint32_t cur_el
, bool secure
)
8876 void aarch64_sync_64_to_32(CPUARMState
*env
)
8878 g_assert_not_reached();
8883 static void switch_mode(CPUARMState
*env
, int mode
)
8888 old_mode
= env
->uncached_cpsr
& CPSR_M
;
8889 if (mode
== old_mode
)
8892 if (old_mode
== ARM_CPU_MODE_FIQ
) {
8893 memcpy (env
->fiq_regs
, env
->regs
+ 8, 5 * sizeof(uint32_t));
8894 memcpy (env
->regs
+ 8, env
->usr_regs
, 5 * sizeof(uint32_t));
8895 } else if (mode
== ARM_CPU_MODE_FIQ
) {
8896 memcpy (env
->usr_regs
, env
->regs
+ 8, 5 * sizeof(uint32_t));
8897 memcpy (env
->regs
+ 8, env
->fiq_regs
, 5 * sizeof(uint32_t));
8900 i
= bank_number(old_mode
);
8901 env
->banked_r13
[i
] = env
->regs
[13];
8902 env
->banked_spsr
[i
] = env
->spsr
;
8904 i
= bank_number(mode
);
8905 env
->regs
[13] = env
->banked_r13
[i
];
8906 env
->spsr
= env
->banked_spsr
[i
];
8908 env
->banked_r14
[r14_bank_number(old_mode
)] = env
->regs
[14];
8909 env
->regs
[14] = env
->banked_r14
[r14_bank_number(mode
)];
8912 /* Physical Interrupt Target EL Lookup Table
8914 * [ From ARM ARM section G1.13.4 (Table G1-15) ]
8916 * The below multi-dimensional table is used for looking up the target
8917 * exception level given numerous condition criteria. Specifically, the
8918 * target EL is based on SCR and HCR routing controls as well as the
8919 * currently executing EL and secure state.
8922 * target_el_table[2][2][2][2][2][4]
8923 * | | | | | +--- Current EL
8924 * | | | | +------ Non-secure(0)/Secure(1)
8925 * | | | +--------- HCR mask override
8926 * | | +------------ SCR exec state control
8927 * | +--------------- SCR mask override
8928 * +------------------ 32-bit(0)/64-bit(1) EL3
8930 * The table values are as such:
8934 * The ARM ARM target EL table includes entries indicating that an "exception
8935 * is not taken". The two cases where this is applicable are:
8936 * 1) An exception is taken from EL3 but the SCR does not have the exception
8938 * 2) An exception is taken from EL2 but the HCR does not have the exception
8940 * In these two cases, the below table contain a target of EL1. This value is
8941 * returned as it is expected that the consumer of the table data will check
8942 * for "target EL >= current EL" to ensure the exception is not taken.
8946 * BIT IRQ IMO Non-secure Secure
8947 * EL3 FIQ RW FMO EL0 EL1 EL2 EL3 EL0 EL1 EL2 EL3
8949 static const int8_t target_el_table
[2][2][2][2][2][4] = {
8950 {{{{/* 0 0 0 0 */{ 1, 1, 2, -1 },{ 3, -1, -1, 3 },},
8951 {/* 0 0 0 1 */{ 2, 2, 2, -1 },{ 3, -1, -1, 3 },},},
8952 {{/* 0 0 1 0 */{ 1, 1, 2, -1 },{ 3, -1, -1, 3 },},
8953 {/* 0 0 1 1 */{ 2, 2, 2, -1 },{ 3, -1, -1, 3 },},},},
8954 {{{/* 0 1 0 0 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},
8955 {/* 0 1 0 1 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},},
8956 {{/* 0 1 1 0 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},
8957 {/* 0 1 1 1 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},},},},
8958 {{{{/* 1 0 0 0 */{ 1, 1, 2, -1 },{ 1, 1, -1, 1 },},
8959 {/* 1 0 0 1 */{ 2, 2, 2, -1 },{ 1, 1, -1, 1 },},},
8960 {{/* 1 0 1 0 */{ 1, 1, 1, -1 },{ 1, 1, -1, 1 },},
8961 {/* 1 0 1 1 */{ 2, 2, 2, -1 },{ 1, 1, -1, 1 },},},},
8962 {{{/* 1 1 0 0 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },},
8963 {/* 1 1 0 1 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },},},
8964 {{/* 1 1 1 0 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },},
8965 {/* 1 1 1 1 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },},},},},
8969 * Determine the target EL for physical exceptions
8971 uint32_t arm_phys_excp_target_el(CPUState
*cs
, uint32_t excp_idx
,
8972 uint32_t cur_el
, bool secure
)
8974 CPUARMState
*env
= cs
->env_ptr
;
8979 /* Is the highest EL AArch64? */
8980 bool is64
= arm_feature(env
, ARM_FEATURE_AARCH64
);
8983 if (arm_feature(env
, ARM_FEATURE_EL3
)) {
8984 rw
= ((env
->cp15
.scr_el3
& SCR_RW
) == SCR_RW
);
8986 /* Either EL2 is the highest EL (and so the EL2 register width
8987 * is given by is64); or there is no EL2 or EL3, in which case
8988 * the value of 'rw' does not affect the table lookup anyway.
8993 hcr_el2
= arm_hcr_el2_eff(env
);
8996 scr
= ((env
->cp15
.scr_el3
& SCR_IRQ
) == SCR_IRQ
);
8997 hcr
= hcr_el2
& HCR_IMO
;
9000 scr
= ((env
->cp15
.scr_el3
& SCR_FIQ
) == SCR_FIQ
);
9001 hcr
= hcr_el2
& HCR_FMO
;
9004 scr
= ((env
->cp15
.scr_el3
& SCR_EA
) == SCR_EA
);
9005 hcr
= hcr_el2
& HCR_AMO
;
9010 * For these purposes, TGE and AMO/IMO/FMO both force the
9011 * interrupt to EL2. Fold TGE into the bit extracted above.
9013 hcr
|= (hcr_el2
& HCR_TGE
) != 0;
9015 /* Perform a table-lookup for the target EL given the current state */
9016 target_el
= target_el_table
[is64
][scr
][rw
][hcr
][secure
][cur_el
];
9018 assert(target_el
> 0);
9023 void arm_log_exception(int idx
)
9025 if (qemu_loglevel_mask(CPU_LOG_INT
)) {
9026 const char *exc
= NULL
;
9027 static const char * const excnames
[] = {
9028 [EXCP_UDEF
] = "Undefined Instruction",
9030 [EXCP_PREFETCH_ABORT
] = "Prefetch Abort",
9031 [EXCP_DATA_ABORT
] = "Data Abort",
9034 [EXCP_BKPT
] = "Breakpoint",
9035 [EXCP_EXCEPTION_EXIT
] = "QEMU v7M exception exit",
9036 [EXCP_KERNEL_TRAP
] = "QEMU intercept of kernel commpage",
9037 [EXCP_HVC
] = "Hypervisor Call",
9038 [EXCP_HYP_TRAP
] = "Hypervisor Trap",
9039 [EXCP_SMC
] = "Secure Monitor Call",
9040 [EXCP_VIRQ
] = "Virtual IRQ",
9041 [EXCP_VFIQ
] = "Virtual FIQ",
9042 [EXCP_SEMIHOST
] = "Semihosting call",
9043 [EXCP_NOCP
] = "v7M NOCP UsageFault",
9044 [EXCP_INVSTATE
] = "v7M INVSTATE UsageFault",
9045 [EXCP_STKOF
] = "v8M STKOF UsageFault",
9046 [EXCP_LAZYFP
] = "v7M exception during lazy FP stacking",
9047 [EXCP_LSERR
] = "v8M LSERR UsageFault",
9048 [EXCP_UNALIGNED
] = "v7M UNALIGNED UsageFault",
9051 if (idx
>= 0 && idx
< ARRAY_SIZE(excnames
)) {
9052 exc
= excnames
[idx
];
9057 qemu_log_mask(CPU_LOG_INT
, "Taking exception %d [%s]\n", idx
, exc
);
9062 * Function used to synchronize QEMU's AArch64 register set with AArch32
9063 * register set. This is necessary when switching between AArch32 and AArch64
9066 void aarch64_sync_32_to_64(CPUARMState
*env
)
9069 uint32_t mode
= env
->uncached_cpsr
& CPSR_M
;
9071 /* We can blanket copy R[0:7] to X[0:7] */
9072 for (i
= 0; i
< 8; i
++) {
9073 env
->xregs
[i
] = env
->regs
[i
];
9077 * Unless we are in FIQ mode, x8-x12 come from the user registers r8-r12.
9078 * Otherwise, they come from the banked user regs.
9080 if (mode
== ARM_CPU_MODE_FIQ
) {
9081 for (i
= 8; i
< 13; i
++) {
9082 env
->xregs
[i
] = env
->usr_regs
[i
- 8];
9085 for (i
= 8; i
< 13; i
++) {
9086 env
->xregs
[i
] = env
->regs
[i
];
9091 * Registers x13-x23 are the various mode SP and FP registers. Registers
9092 * r13 and r14 are only copied if we are in that mode, otherwise we copy
9093 * from the mode banked register.
9095 if (mode
== ARM_CPU_MODE_USR
|| mode
== ARM_CPU_MODE_SYS
) {
9096 env
->xregs
[13] = env
->regs
[13];
9097 env
->xregs
[14] = env
->regs
[14];
9099 env
->xregs
[13] = env
->banked_r13
[bank_number(ARM_CPU_MODE_USR
)];
9100 /* HYP is an exception in that it is copied from r14 */
9101 if (mode
== ARM_CPU_MODE_HYP
) {
9102 env
->xregs
[14] = env
->regs
[14];
9104 env
->xregs
[14] = env
->banked_r14
[r14_bank_number(ARM_CPU_MODE_USR
)];
9108 if (mode
== ARM_CPU_MODE_HYP
) {
9109 env
->xregs
[15] = env
->regs
[13];
9111 env
->xregs
[15] = env
->banked_r13
[bank_number(ARM_CPU_MODE_HYP
)];
9114 if (mode
== ARM_CPU_MODE_IRQ
) {
9115 env
->xregs
[16] = env
->regs
[14];
9116 env
->xregs
[17] = env
->regs
[13];
9118 env
->xregs
[16] = env
->banked_r14
[r14_bank_number(ARM_CPU_MODE_IRQ
)];
9119 env
->xregs
[17] = env
->banked_r13
[bank_number(ARM_CPU_MODE_IRQ
)];
9122 if (mode
== ARM_CPU_MODE_SVC
) {
9123 env
->xregs
[18] = env
->regs
[14];
9124 env
->xregs
[19] = env
->regs
[13];
9126 env
->xregs
[18] = env
->banked_r14
[r14_bank_number(ARM_CPU_MODE_SVC
)];
9127 env
->xregs
[19] = env
->banked_r13
[bank_number(ARM_CPU_MODE_SVC
)];
9130 if (mode
== ARM_CPU_MODE_ABT
) {
9131 env
->xregs
[20] = env
->regs
[14];
9132 env
->xregs
[21] = env
->regs
[13];
9134 env
->xregs
[20] = env
->banked_r14
[r14_bank_number(ARM_CPU_MODE_ABT
)];
9135 env
->xregs
[21] = env
->banked_r13
[bank_number(ARM_CPU_MODE_ABT
)];
9138 if (mode
== ARM_CPU_MODE_UND
) {
9139 env
->xregs
[22] = env
->regs
[14];
9140 env
->xregs
[23] = env
->regs
[13];
9142 env
->xregs
[22] = env
->banked_r14
[r14_bank_number(ARM_CPU_MODE_UND
)];
9143 env
->xregs
[23] = env
->banked_r13
[bank_number(ARM_CPU_MODE_UND
)];
9147 * Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ
9148 * mode, then we can copy from r8-r14. Otherwise, we copy from the
9149 * FIQ bank for r8-r14.
9151 if (mode
== ARM_CPU_MODE_FIQ
) {
9152 for (i
= 24; i
< 31; i
++) {
9153 env
->xregs
[i
] = env
->regs
[i
- 16]; /* X[24:30] <- R[8:14] */
9156 for (i
= 24; i
< 29; i
++) {
9157 env
->xregs
[i
] = env
->fiq_regs
[i
- 24];
9159 env
->xregs
[29] = env
->banked_r13
[bank_number(ARM_CPU_MODE_FIQ
)];
9160 env
->xregs
[30] = env
->banked_r14
[r14_bank_number(ARM_CPU_MODE_FIQ
)];
9163 env
->pc
= env
->regs
[15];
9167 * Function used to synchronize QEMU's AArch32 register set with AArch64
9168 * register set. This is necessary when switching between AArch32 and AArch64
9171 void aarch64_sync_64_to_32(CPUARMState
*env
)
9174 uint32_t mode
= env
->uncached_cpsr
& CPSR_M
;
9176 /* We can blanket copy X[0:7] to R[0:7] */
9177 for (i
= 0; i
< 8; i
++) {
9178 env
->regs
[i
] = env
->xregs
[i
];
9182 * Unless we are in FIQ mode, r8-r12 come from the user registers x8-x12.
9183 * Otherwise, we copy x8-x12 into the banked user regs.
9185 if (mode
== ARM_CPU_MODE_FIQ
) {
9186 for (i
= 8; i
< 13; i
++) {
9187 env
->usr_regs
[i
- 8] = env
->xregs
[i
];
9190 for (i
= 8; i
< 13; i
++) {
9191 env
->regs
[i
] = env
->xregs
[i
];
9196 * Registers r13 & r14 depend on the current mode.
9197 * If we are in a given mode, we copy the corresponding x registers to r13
9198 * and r14. Otherwise, we copy the x register to the banked r13 and r14
9201 if (mode
== ARM_CPU_MODE_USR
|| mode
== ARM_CPU_MODE_SYS
) {
9202 env
->regs
[13] = env
->xregs
[13];
9203 env
->regs
[14] = env
->xregs
[14];
9205 env
->banked_r13
[bank_number(ARM_CPU_MODE_USR
)] = env
->xregs
[13];
9208 * HYP is an exception in that it does not have its own banked r14 but
9209 * shares the USR r14
9211 if (mode
== ARM_CPU_MODE_HYP
) {
9212 env
->regs
[14] = env
->xregs
[14];
9214 env
->banked_r14
[r14_bank_number(ARM_CPU_MODE_USR
)] = env
->xregs
[14];
9218 if (mode
== ARM_CPU_MODE_HYP
) {
9219 env
->regs
[13] = env
->xregs
[15];
9221 env
->banked_r13
[bank_number(ARM_CPU_MODE_HYP
)] = env
->xregs
[15];
9224 if (mode
== ARM_CPU_MODE_IRQ
) {
9225 env
->regs
[14] = env
->xregs
[16];
9226 env
->regs
[13] = env
->xregs
[17];
9228 env
->banked_r14
[r14_bank_number(ARM_CPU_MODE_IRQ
)] = env
->xregs
[16];
9229 env
->banked_r13
[bank_number(ARM_CPU_MODE_IRQ
)] = env
->xregs
[17];
9232 if (mode
== ARM_CPU_MODE_SVC
) {
9233 env
->regs
[14] = env
->xregs
[18];
9234 env
->regs
[13] = env
->xregs
[19];
9236 env
->banked_r14
[r14_bank_number(ARM_CPU_MODE_SVC
)] = env
->xregs
[18];
9237 env
->banked_r13
[bank_number(ARM_CPU_MODE_SVC
)] = env
->xregs
[19];
9240 if (mode
== ARM_CPU_MODE_ABT
) {
9241 env
->regs
[14] = env
->xregs
[20];
9242 env
->regs
[13] = env
->xregs
[21];
9244 env
->banked_r14
[r14_bank_number(ARM_CPU_MODE_ABT
)] = env
->xregs
[20];
9245 env
->banked_r13
[bank_number(ARM_CPU_MODE_ABT
)] = env
->xregs
[21];
9248 if (mode
== ARM_CPU_MODE_UND
) {
9249 env
->regs
[14] = env
->xregs
[22];
9250 env
->regs
[13] = env
->xregs
[23];
9252 env
->banked_r14
[r14_bank_number(ARM_CPU_MODE_UND
)] = env
->xregs
[22];
9253 env
->banked_r13
[bank_number(ARM_CPU_MODE_UND
)] = env
->xregs
[23];
9256 /* Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ
9257 * mode, then we can copy to r8-r14. Otherwise, we copy to the
9258 * FIQ bank for r8-r14.
9260 if (mode
== ARM_CPU_MODE_FIQ
) {
9261 for (i
= 24; i
< 31; i
++) {
9262 env
->regs
[i
- 16] = env
->xregs
[i
]; /* X[24:30] -> R[8:14] */
9265 for (i
= 24; i
< 29; i
++) {
9266 env
->fiq_regs
[i
- 24] = env
->xregs
[i
];
9268 env
->banked_r13
[bank_number(ARM_CPU_MODE_FIQ
)] = env
->xregs
[29];
9269 env
->banked_r14
[r14_bank_number(ARM_CPU_MODE_FIQ
)] = env
->xregs
[30];
9272 env
->regs
[15] = env
->pc
;
9275 static void take_aarch32_exception(CPUARMState
*env
, int new_mode
,
9276 uint32_t mask
, uint32_t offset
,
9281 /* Change the CPU state so as to actually take the exception. */
9282 switch_mode(env
, new_mode
);
9285 * For exceptions taken to AArch32 we must clear the SS bit in both
9286 * PSTATE and in the old-state value we save to SPSR_<mode>, so zero it now.
9288 env
->uncached_cpsr
&= ~PSTATE_SS
;
9289 env
->spsr
= cpsr_read(env
);
9290 /* Clear IT bits. */
9291 env
->condexec_bits
= 0;
9292 /* Switch to the new mode, and to the correct instruction set. */
9293 env
->uncached_cpsr
= (env
->uncached_cpsr
& ~CPSR_M
) | new_mode
;
9295 /* This must be after mode switching. */
9296 new_el
= arm_current_el(env
);
9298 /* Set new mode endianness */
9299 env
->uncached_cpsr
&= ~CPSR_E
;
9300 if (env
->cp15
.sctlr_el
[new_el
] & SCTLR_EE
) {
9301 env
->uncached_cpsr
|= CPSR_E
;
9303 /* J and IL must always be cleared for exception entry */
9304 env
->uncached_cpsr
&= ~(CPSR_IL
| CPSR_J
);
9307 if (new_mode
== ARM_CPU_MODE_HYP
) {
9308 env
->thumb
= (env
->cp15
.sctlr_el
[2] & SCTLR_TE
) != 0;
9309 env
->elr_el
[2] = env
->regs
[15];
9311 /* CPSR.PAN is normally preserved preserved unless... */
9312 if (cpu_isar_feature(aa32_pan
, env_archcpu(env
))) {
9315 if (!arm_is_secure_below_el3(env
)) {
9316 /* ... the target is EL3, from non-secure state. */
9317 env
->uncached_cpsr
&= ~CPSR_PAN
;
9320 /* ... the target is EL3, from secure state ... */
9323 /* ... the target is EL1 and SCTLR.SPAN is 0. */
9324 if (!(env
->cp15
.sctlr_el
[new_el
] & SCTLR_SPAN
)) {
9325 env
->uncached_cpsr
|= CPSR_PAN
;
9331 * this is a lie, as there was no c1_sys on V4T/V5, but who cares
9332 * and we should just guard the thumb mode on V4
9334 if (arm_feature(env
, ARM_FEATURE_V4T
)) {
9336 (A32_BANKED_CURRENT_REG_GET(env
, sctlr
) & SCTLR_TE
) != 0;
9338 env
->regs
[14] = env
->regs
[15] + offset
;
9340 env
->regs
[15] = newpc
;
9341 arm_rebuild_hflags(env
);
9344 static void arm_cpu_do_interrupt_aarch32_hyp(CPUState
*cs
)
9347 * Handle exception entry to Hyp mode; this is sufficiently
9348 * different to entry to other AArch32 modes that we handle it
9351 * The vector table entry used is always the 0x14 Hyp mode entry point,
9352 * unless this is an UNDEF/HVC/abort taken from Hyp to Hyp.
9353 * The offset applied to the preferred return address is always zero
9354 * (see DDI0487C.a section G1.12.3).
9355 * PSTATE A/I/F masks are set based only on the SCR.EA/IRQ/FIQ values.
9357 uint32_t addr
, mask
;
9358 ARMCPU
*cpu
= ARM_CPU(cs
);
9359 CPUARMState
*env
= &cpu
->env
;
9361 switch (cs
->exception_index
) {
9369 /* Fall through to prefetch abort. */
9370 case EXCP_PREFETCH_ABORT
:
9371 env
->cp15
.ifar_s
= env
->exception
.vaddress
;
9372 qemu_log_mask(CPU_LOG_INT
, "...with HIFAR 0x%x\n",
9373 (uint32_t)env
->exception
.vaddress
);
9376 case EXCP_DATA_ABORT
:
9377 env
->cp15
.dfar_s
= env
->exception
.vaddress
;
9378 qemu_log_mask(CPU_LOG_INT
, "...with HDFAR 0x%x\n",
9379 (uint32_t)env
->exception
.vaddress
);
9395 cpu_abort(cs
, "Unhandled exception 0x%x\n", cs
->exception_index
);
9398 if (cs
->exception_index
!= EXCP_IRQ
&& cs
->exception_index
!= EXCP_FIQ
) {
9399 if (!arm_feature(env
, ARM_FEATURE_V8
)) {
9401 * QEMU syndrome values are v8-style. v7 has the IL bit
9402 * UNK/SBZP for "field not valid" cases, where v8 uses RES1.
9403 * If this is a v7 CPU, squash the IL bit in those cases.
9405 if (cs
->exception_index
== EXCP_PREFETCH_ABORT
||
9406 (cs
->exception_index
== EXCP_DATA_ABORT
&&
9407 !(env
->exception
.syndrome
& ARM_EL_ISV
)) ||
9408 syn_get_ec(env
->exception
.syndrome
) == EC_UNCATEGORIZED
) {
9409 env
->exception
.syndrome
&= ~ARM_EL_IL
;
9412 env
->cp15
.esr_el
[2] = env
->exception
.syndrome
;
9415 if (arm_current_el(env
) != 2 && addr
< 0x14) {
9420 if (!(env
->cp15
.scr_el3
& SCR_EA
)) {
9423 if (!(env
->cp15
.scr_el3
& SCR_IRQ
)) {
9426 if (!(env
->cp15
.scr_el3
& SCR_FIQ
)) {
9430 addr
+= env
->cp15
.hvbar
;
9432 take_aarch32_exception(env
, ARM_CPU_MODE_HYP
, mask
, 0, addr
);
9435 static void arm_cpu_do_interrupt_aarch32(CPUState
*cs
)
9437 ARMCPU
*cpu
= ARM_CPU(cs
);
9438 CPUARMState
*env
= &cpu
->env
;
9445 /* If this is a debug exception we must update the DBGDSCR.MOE bits */
9446 switch (syn_get_ec(env
->exception
.syndrome
)) {
9448 case EC_BREAKPOINT_SAME_EL
:
9452 case EC_WATCHPOINT_SAME_EL
:
9458 case EC_VECTORCATCH
:
9467 env
->cp15
.mdscr_el1
= deposit64(env
->cp15
.mdscr_el1
, 2, 4, moe
);
9470 if (env
->exception
.target_el
== 2) {
9471 arm_cpu_do_interrupt_aarch32_hyp(cs
);
9475 switch (cs
->exception_index
) {
9477 new_mode
= ARM_CPU_MODE_UND
;
9486 new_mode
= ARM_CPU_MODE_SVC
;
9489 /* The PC already points to the next instruction. */
9493 /* Fall through to prefetch abort. */
9494 case EXCP_PREFETCH_ABORT
:
9495 A32_BANKED_CURRENT_REG_SET(env
, ifsr
, env
->exception
.fsr
);
9496 A32_BANKED_CURRENT_REG_SET(env
, ifar
, env
->exception
.vaddress
);
9497 qemu_log_mask(CPU_LOG_INT
, "...with IFSR 0x%x IFAR 0x%x\n",
9498 env
->exception
.fsr
, (uint32_t)env
->exception
.vaddress
);
9499 new_mode
= ARM_CPU_MODE_ABT
;
9501 mask
= CPSR_A
| CPSR_I
;
9504 case EXCP_DATA_ABORT
:
9505 A32_BANKED_CURRENT_REG_SET(env
, dfsr
, env
->exception
.fsr
);
9506 A32_BANKED_CURRENT_REG_SET(env
, dfar
, env
->exception
.vaddress
);
9507 qemu_log_mask(CPU_LOG_INT
, "...with DFSR 0x%x DFAR 0x%x\n",
9509 (uint32_t)env
->exception
.vaddress
);
9510 new_mode
= ARM_CPU_MODE_ABT
;
9512 mask
= CPSR_A
| CPSR_I
;
9516 new_mode
= ARM_CPU_MODE_IRQ
;
9518 /* Disable IRQ and imprecise data aborts. */
9519 mask
= CPSR_A
| CPSR_I
;
9521 if (env
->cp15
.scr_el3
& SCR_IRQ
) {
9522 /* IRQ routed to monitor mode */
9523 new_mode
= ARM_CPU_MODE_MON
;
9528 new_mode
= ARM_CPU_MODE_FIQ
;
9530 /* Disable FIQ, IRQ and imprecise data aborts. */
9531 mask
= CPSR_A
| CPSR_I
| CPSR_F
;
9532 if (env
->cp15
.scr_el3
& SCR_FIQ
) {
9533 /* FIQ routed to monitor mode */
9534 new_mode
= ARM_CPU_MODE_MON
;
9539 new_mode
= ARM_CPU_MODE_IRQ
;
9541 /* Disable IRQ and imprecise data aborts. */
9542 mask
= CPSR_A
| CPSR_I
;
9546 new_mode
= ARM_CPU_MODE_FIQ
;
9548 /* Disable FIQ, IRQ and imprecise data aborts. */
9549 mask
= CPSR_A
| CPSR_I
| CPSR_F
;
9553 new_mode
= ARM_CPU_MODE_MON
;
9555 mask
= CPSR_A
| CPSR_I
| CPSR_F
;
9559 cpu_abort(cs
, "Unhandled exception 0x%x\n", cs
->exception_index
);
9560 return; /* Never happens. Keep compiler happy. */
9563 if (new_mode
== ARM_CPU_MODE_MON
) {
9564 addr
+= env
->cp15
.mvbar
;
9565 } else if (A32_BANKED_CURRENT_REG_GET(env
, sctlr
) & SCTLR_V
) {
9566 /* High vectors. When enabled, base address cannot be remapped. */
9569 /* ARM v7 architectures provide a vector base address register to remap
9570 * the interrupt vector table.
9571 * This register is only followed in non-monitor mode, and is banked.
9572 * Note: only bits 31:5 are valid.
9574 addr
+= A32_BANKED_CURRENT_REG_GET(env
, vbar
);
9577 if ((env
->uncached_cpsr
& CPSR_M
) == ARM_CPU_MODE_MON
) {
9578 env
->cp15
.scr_el3
&= ~SCR_NS
;
9581 take_aarch32_exception(env
, new_mode
, mask
, offset
, addr
);
9584 /* Handle exception entry to a target EL which is using AArch64 */
9585 static void arm_cpu_do_interrupt_aarch64(CPUState
*cs
)
9587 ARMCPU
*cpu
= ARM_CPU(cs
);
9588 CPUARMState
*env
= &cpu
->env
;
9589 unsigned int new_el
= env
->exception
.target_el
;
9590 target_ulong addr
= env
->cp15
.vbar_el
[new_el
];
9591 unsigned int new_mode
= aarch64_pstate_mode(new_el
, true);
9592 unsigned int old_mode
;
9593 unsigned int cur_el
= arm_current_el(env
);
9596 * Note that new_el can never be 0. If cur_el is 0, then
9597 * el0_a64 is is_a64(), else el0_a64 is ignored.
9599 aarch64_sve_change_el(env
, cur_el
, new_el
, is_a64(env
));
9601 if (cur_el
< new_el
) {
9602 /* Entry vector offset depends on whether the implemented EL
9603 * immediately lower than the target level is using AArch32 or AArch64
9610 is_aa64
= (env
->cp15
.scr_el3
& SCR_RW
) != 0;
9613 hcr
= arm_hcr_el2_eff(env
);
9614 if ((hcr
& (HCR_E2H
| HCR_TGE
)) != (HCR_E2H
| HCR_TGE
)) {
9615 is_aa64
= (hcr
& HCR_RW
) != 0;
9620 is_aa64
= is_a64(env
);
9623 g_assert_not_reached();
9631 } else if (pstate_read(env
) & PSTATE_SP
) {
9635 switch (cs
->exception_index
) {
9636 case EXCP_PREFETCH_ABORT
:
9637 case EXCP_DATA_ABORT
:
9638 env
->cp15
.far_el
[new_el
] = env
->exception
.vaddress
;
9639 qemu_log_mask(CPU_LOG_INT
, "...with FAR 0x%" PRIx64
"\n",
9640 env
->cp15
.far_el
[new_el
]);
9648 if (syn_get_ec(env
->exception
.syndrome
) == EC_ADVSIMDFPACCESSTRAP
) {
9650 * QEMU internal FP/SIMD syndromes from AArch32 include the
9651 * TA and coproc fields which are only exposed if the exception
9652 * is taken to AArch32 Hyp mode. Mask them out to get a valid
9653 * AArch64 format syndrome.
9655 env
->exception
.syndrome
&= ~MAKE_64BIT_MASK(0, 20);
9657 env
->cp15
.esr_el
[new_el
] = env
->exception
.syndrome
;
9668 cpu_abort(cs
, "Unhandled exception 0x%x\n", cs
->exception_index
);
9672 old_mode
= pstate_read(env
);
9673 aarch64_save_sp(env
, arm_current_el(env
));
9674 env
->elr_el
[new_el
] = env
->pc
;
9676 old_mode
= cpsr_read(env
);
9677 env
->elr_el
[new_el
] = env
->regs
[15];
9679 aarch64_sync_32_to_64(env
);
9681 env
->condexec_bits
= 0;
9683 env
->banked_spsr
[aarch64_banked_spsr_index(new_el
)] = old_mode
;
9685 qemu_log_mask(CPU_LOG_INT
, "...with ELR 0x%" PRIx64
"\n",
9686 env
->elr_el
[new_el
]);
9688 if (cpu_isar_feature(aa64_pan
, cpu
)) {
9689 /* The value of PSTATE.PAN is normally preserved, except when ... */
9690 new_mode
|= old_mode
& PSTATE_PAN
;
9693 /* ... the target is EL2 with HCR_EL2.{E2H,TGE} == '11' ... */
9694 if ((arm_hcr_el2_eff(env
) & (HCR_E2H
| HCR_TGE
))
9695 != (HCR_E2H
| HCR_TGE
)) {
9700 /* ... the target is EL1 ... */
9701 /* ... and SCTLR_ELx.SPAN == 0, then set to 1. */
9702 if ((env
->cp15
.sctlr_el
[new_el
] & SCTLR_SPAN
) == 0) {
9703 new_mode
|= PSTATE_PAN
;
9708 if (cpu_isar_feature(aa64_mte
, cpu
)) {
9709 new_mode
|= PSTATE_TCO
;
9712 pstate_write(env
, PSTATE_DAIF
| new_mode
);
9714 aarch64_restore_sp(env
, new_el
);
9715 helper_rebuild_hflags_a64(env
, new_el
);
9719 qemu_log_mask(CPU_LOG_INT
, "...to EL%d PC 0x%" PRIx64
" PSTATE 0x%x\n",
9720 new_el
, env
->pc
, pstate_read(env
));
9724 * Do semihosting call and set the appropriate return value. All the
9725 * permission and validity checks have been done at translate time.
9727 * We only see semihosting exceptions in TCG only as they are not
9728 * trapped to the hypervisor in KVM.
9731 static void handle_semihosting(CPUState
*cs
)
9733 ARMCPU
*cpu
= ARM_CPU(cs
);
9734 CPUARMState
*env
= &cpu
->env
;
9737 qemu_log_mask(CPU_LOG_INT
,
9738 "...handling as semihosting call 0x%" PRIx64
"\n",
9740 env
->xregs
[0] = do_arm_semihosting(env
);
9743 qemu_log_mask(CPU_LOG_INT
,
9744 "...handling as semihosting call 0x%x\n",
9746 env
->regs
[0] = do_arm_semihosting(env
);
9747 env
->regs
[15] += env
->thumb
? 2 : 4;
9752 /* Handle a CPU exception for A and R profile CPUs.
9753 * Do any appropriate logging, handle PSCI calls, and then hand off
9754 * to the AArch64-entry or AArch32-entry function depending on the
9755 * target exception level's register width.
9757 void arm_cpu_do_interrupt(CPUState
*cs
)
9759 ARMCPU
*cpu
= ARM_CPU(cs
);
9760 CPUARMState
*env
= &cpu
->env
;
9761 unsigned int new_el
= env
->exception
.target_el
;
9763 assert(!arm_feature(env
, ARM_FEATURE_M
));
9765 arm_log_exception(cs
->exception_index
);
9766 qemu_log_mask(CPU_LOG_INT
, "...from EL%d to EL%d\n", arm_current_el(env
),
9768 if (qemu_loglevel_mask(CPU_LOG_INT
)
9769 && !excp_is_internal(cs
->exception_index
)) {
9770 qemu_log_mask(CPU_LOG_INT
, "...with ESR 0x%x/0x%" PRIx32
"\n",
9771 syn_get_ec(env
->exception
.syndrome
),
9772 env
->exception
.syndrome
);
9775 if (arm_is_psci_call(cpu
, cs
->exception_index
)) {
9776 arm_handle_psci_call(cpu
);
9777 qemu_log_mask(CPU_LOG_INT
, "...handled as PSCI call\n");
9782 * Semihosting semantics depend on the register width of the code
9783 * that caused the exception, not the target exception level, so
9784 * must be handled here.
9787 if (cs
->exception_index
== EXCP_SEMIHOST
) {
9788 handle_semihosting(cs
);
9793 /* Hooks may change global state so BQL should be held, also the
9794 * BQL needs to be held for any modification of
9795 * cs->interrupt_request.
9797 g_assert(qemu_mutex_iothread_locked());
9799 arm_call_pre_el_change_hook(cpu
);
9801 assert(!excp_is_internal(cs
->exception_index
));
9802 if (arm_el_is_aa64(env
, new_el
)) {
9803 arm_cpu_do_interrupt_aarch64(cs
);
9805 arm_cpu_do_interrupt_aarch32(cs
);
9808 arm_call_el_change_hook(cpu
);
9810 if (!kvm_enabled()) {
9811 cs
->interrupt_request
|= CPU_INTERRUPT_EXITTB
;
9814 #endif /* !CONFIG_USER_ONLY */
9816 uint64_t arm_sctlr(CPUARMState
*env
, int el
)
9818 /* Only EL0 needs to be adjusted for EL1&0 or EL2&0. */
9820 ARMMMUIdx mmu_idx
= arm_mmu_idx_el(env
, 0);
9821 el
= (mmu_idx
== ARMMMUIdx_E20_0
? 2 : 1);
9823 return env
->cp15
.sctlr_el
[el
];
9826 /* Return the SCTLR value which controls this address translation regime */
9827 static inline uint64_t regime_sctlr(CPUARMState
*env
, ARMMMUIdx mmu_idx
)
9829 return env
->cp15
.sctlr_el
[regime_el(env
, mmu_idx
)];
9832 #ifndef CONFIG_USER_ONLY
9834 /* Return true if the specified stage of address translation is disabled */
9835 static inline bool regime_translation_disabled(CPUARMState
*env
,
9838 if (arm_feature(env
, ARM_FEATURE_M
)) {
9839 switch (env
->v7m
.mpu_ctrl
[regime_is_secure(env
, mmu_idx
)] &
9840 (R_V7M_MPU_CTRL_ENABLE_MASK
| R_V7M_MPU_CTRL_HFNMIENA_MASK
)) {
9841 case R_V7M_MPU_CTRL_ENABLE_MASK
:
9842 /* Enabled, but not for HardFault and NMI */
9843 return mmu_idx
& ARM_MMU_IDX_M_NEGPRI
;
9844 case R_V7M_MPU_CTRL_ENABLE_MASK
| R_V7M_MPU_CTRL_HFNMIENA_MASK
:
9845 /* Enabled for all cases */
9849 /* HFNMIENA set and ENABLE clear is UNPREDICTABLE, but
9850 * we warned about that in armv7m_nvic.c when the guest set it.
9856 if (mmu_idx
== ARMMMUIdx_Stage2
) {
9857 /* HCR.DC means HCR.VM behaves as 1 */
9858 return (env
->cp15
.hcr_el2
& (HCR_DC
| HCR_VM
)) == 0;
9861 if (env
->cp15
.hcr_el2
& HCR_TGE
) {
9862 /* TGE means that NS EL0/1 act as if SCTLR_EL1.M is zero */
9863 if (!regime_is_secure(env
, mmu_idx
) && regime_el(env
, mmu_idx
) == 1) {
9868 if ((env
->cp15
.hcr_el2
& HCR_DC
) && arm_mmu_idx_is_stage1_of_2(mmu_idx
)) {
9869 /* HCR.DC means SCTLR_EL1.M behaves as 0 */
9873 return (regime_sctlr(env
, mmu_idx
) & SCTLR_M
) == 0;
9876 static inline bool regime_translation_big_endian(CPUARMState
*env
,
9879 return (regime_sctlr(env
, mmu_idx
) & SCTLR_EE
) != 0;
9882 /* Return the TTBR associated with this translation regime */
9883 static inline uint64_t regime_ttbr(CPUARMState
*env
, ARMMMUIdx mmu_idx
,
9886 if (mmu_idx
== ARMMMUIdx_Stage2
) {
9887 return env
->cp15
.vttbr_el2
;
9890 return env
->cp15
.ttbr0_el
[regime_el(env
, mmu_idx
)];
9892 return env
->cp15
.ttbr1_el
[regime_el(env
, mmu_idx
)];
9896 #endif /* !CONFIG_USER_ONLY */
9898 /* Convert a possible stage1+2 MMU index into the appropriate
9901 static inline ARMMMUIdx
stage_1_mmu_idx(ARMMMUIdx mmu_idx
)
9904 case ARMMMUIdx_E10_0
:
9905 return ARMMMUIdx_Stage1_E0
;
9906 case ARMMMUIdx_E10_1
:
9907 return ARMMMUIdx_Stage1_E1
;
9908 case ARMMMUIdx_E10_1_PAN
:
9909 return ARMMMUIdx_Stage1_E1_PAN
;
9915 /* Return true if the translation regime is using LPAE format page tables */
9916 static inline bool regime_using_lpae_format(CPUARMState
*env
,
9919 int el
= regime_el(env
, mmu_idx
);
9920 if (el
== 2 || arm_el_is_aa64(env
, el
)) {
9923 if (arm_feature(env
, ARM_FEATURE_LPAE
)
9924 && (regime_tcr(env
, mmu_idx
)->raw_tcr
& TTBCR_EAE
)) {
9930 /* Returns true if the stage 1 translation regime is using LPAE format page
9931 * tables. Used when raising alignment exceptions, whose FSR changes depending
9932 * on whether the long or short descriptor format is in use. */
9933 bool arm_s1_regime_using_lpae_format(CPUARMState
*env
, ARMMMUIdx mmu_idx
)
9935 mmu_idx
= stage_1_mmu_idx(mmu_idx
);
9937 return regime_using_lpae_format(env
, mmu_idx
);
9940 #ifndef CONFIG_USER_ONLY
9941 static inline bool regime_is_user(CPUARMState
*env
, ARMMMUIdx mmu_idx
)
9944 case ARMMMUIdx_SE10_0
:
9945 case ARMMMUIdx_E20_0
:
9946 case ARMMMUIdx_Stage1_E0
:
9947 case ARMMMUIdx_MUser
:
9948 case ARMMMUIdx_MSUser
:
9949 case ARMMMUIdx_MUserNegPri
:
9950 case ARMMMUIdx_MSUserNegPri
:
9954 case ARMMMUIdx_E10_0
:
9955 case ARMMMUIdx_E10_1
:
9956 case ARMMMUIdx_E10_1_PAN
:
9957 g_assert_not_reached();
9961 /* Translate section/page access permissions to page
9962 * R/W protection flags
9965 * @mmu_idx: MMU index indicating required translation regime
9966 * @ap: The 3-bit access permissions (AP[2:0])
9967 * @domain_prot: The 2-bit domain access permissions
9969 static inline int ap_to_rw_prot(CPUARMState
*env
, ARMMMUIdx mmu_idx
,
9970 int ap
, int domain_prot
)
9972 bool is_user
= regime_is_user(env
, mmu_idx
);
9974 if (domain_prot
== 3) {
9975 return PAGE_READ
| PAGE_WRITE
;
9980 if (arm_feature(env
, ARM_FEATURE_V7
)) {
9983 switch (regime_sctlr(env
, mmu_idx
) & (SCTLR_S
| SCTLR_R
)) {
9985 return is_user
? 0 : PAGE_READ
;
9992 return is_user
? 0 : PAGE_READ
| PAGE_WRITE
;
9997 return PAGE_READ
| PAGE_WRITE
;
10000 return PAGE_READ
| PAGE_WRITE
;
10001 case 4: /* Reserved. */
10004 return is_user
? 0 : PAGE_READ
;
10008 if (!arm_feature(env
, ARM_FEATURE_V6K
)) {
10013 g_assert_not_reached();
10017 /* Translate section/page access permissions to page
10018 * R/W protection flags.
10020 * @ap: The 2-bit simple AP (AP[2:1])
10021 * @is_user: TRUE if accessing from PL0
10023 static inline int simple_ap_to_rw_prot_is_user(int ap
, bool is_user
)
10027 return is_user
? 0 : PAGE_READ
| PAGE_WRITE
;
10029 return PAGE_READ
| PAGE_WRITE
;
10031 return is_user
? 0 : PAGE_READ
;
10035 g_assert_not_reached();
10040 simple_ap_to_rw_prot(CPUARMState
*env
, ARMMMUIdx mmu_idx
, int ap
)
10042 return simple_ap_to_rw_prot_is_user(ap
, regime_is_user(env
, mmu_idx
));
10045 /* Translate S2 section/page access permissions to protection flags
10047 * @env: CPUARMState
10048 * @s2ap: The 2-bit stage2 access permissions (S2AP)
10049 * @xn: XN (execute-never) bits
10050 * @s1_is_el0: true if this is S2 of an S1+2 walk for EL0
10052 static int get_S2prot(CPUARMState
*env
, int s2ap
, int xn
, bool s1_is_el0
)
10060 prot
|= PAGE_WRITE
;
10063 if (cpu_isar_feature(any_tts2uxn
, env_archcpu(env
))) {
10081 g_assert_not_reached();
10084 if (!extract32(xn
, 1, 1)) {
10085 if (arm_el_is_aa64(env
, 2) || prot
& PAGE_READ
) {
10093 /* Translate section/page access permissions to protection flags
10095 * @env: CPUARMState
10096 * @mmu_idx: MMU index indicating required translation regime
10097 * @is_aa64: TRUE if AArch64
10098 * @ap: The 2-bit simple AP (AP[2:1])
10099 * @ns: NS (non-secure) bit
10100 * @xn: XN (execute-never) bit
10101 * @pxn: PXN (privileged execute-never) bit
10103 static int get_S1prot(CPUARMState
*env
, ARMMMUIdx mmu_idx
, bool is_aa64
,
10104 int ap
, int ns
, int xn
, int pxn
)
10106 bool is_user
= regime_is_user(env
, mmu_idx
);
10107 int prot_rw
, user_rw
;
10111 assert(mmu_idx
!= ARMMMUIdx_Stage2
);
10113 user_rw
= simple_ap_to_rw_prot_is_user(ap
, true);
10117 if (user_rw
&& regime_is_pan(env
, mmu_idx
)) {
10118 /* PAN forbids data accesses but doesn't affect insn fetch */
10121 prot_rw
= simple_ap_to_rw_prot_is_user(ap
, false);
10125 if (ns
&& arm_is_secure(env
) && (env
->cp15
.scr_el3
& SCR_SIF
)) {
10129 /* TODO have_wxn should be replaced with
10130 * ARM_FEATURE_V8 || (ARM_FEATURE_V7 && ARM_FEATURE_EL2)
10131 * when ARM_FEATURE_EL2 starts getting set. For now we assume all LPAE
10132 * compatible processors have EL2, which is required for [U]WXN.
10134 have_wxn
= arm_feature(env
, ARM_FEATURE_LPAE
);
10137 wxn
= regime_sctlr(env
, mmu_idx
) & SCTLR_WXN
;
10141 if (regime_has_2_ranges(mmu_idx
) && !is_user
) {
10142 xn
= pxn
|| (user_rw
& PAGE_WRITE
);
10144 } else if (arm_feature(env
, ARM_FEATURE_V7
)) {
10145 switch (regime_el(env
, mmu_idx
)) {
10149 xn
= xn
|| !(user_rw
& PAGE_READ
);
10153 uwxn
= regime_sctlr(env
, mmu_idx
) & SCTLR_UWXN
;
10155 xn
= xn
|| !(prot_rw
& PAGE_READ
) || pxn
||
10156 (uwxn
&& (user_rw
& PAGE_WRITE
));
10166 if (xn
|| (wxn
&& (prot_rw
& PAGE_WRITE
))) {
10169 return prot_rw
| PAGE_EXEC
;
10172 static bool get_level1_table_address(CPUARMState
*env
, ARMMMUIdx mmu_idx
,
10173 uint32_t *table
, uint32_t address
)
10175 /* Note that we can only get here for an AArch32 PL0/PL1 lookup */
10176 TCR
*tcr
= regime_tcr(env
, mmu_idx
);
10178 if (address
& tcr
->mask
) {
10179 if (tcr
->raw_tcr
& TTBCR_PD1
) {
10180 /* Translation table walk disabled for TTBR1 */
10183 *table
= regime_ttbr(env
, mmu_idx
, 1) & 0xffffc000;
10185 if (tcr
->raw_tcr
& TTBCR_PD0
) {
10186 /* Translation table walk disabled for TTBR0 */
10189 *table
= regime_ttbr(env
, mmu_idx
, 0) & tcr
->base_mask
;
10191 *table
|= (address
>> 18) & 0x3ffc;
10195 /* Translate a S1 pagetable walk through S2 if needed. */
10196 static hwaddr
S1_ptw_translate(CPUARMState
*env
, ARMMMUIdx mmu_idx
,
10197 hwaddr addr
, MemTxAttrs txattrs
,
10198 ARMMMUFaultInfo
*fi
)
10200 if (arm_mmu_idx_is_stage1_of_2(mmu_idx
) &&
10201 !regime_translation_disabled(env
, ARMMMUIdx_Stage2
)) {
10202 target_ulong s2size
;
10206 ARMCacheAttrs cacheattrs
= {};
10207 ARMCacheAttrs
*pcacheattrs
= NULL
;
10209 if (env
->cp15
.hcr_el2
& HCR_PTW
) {
10211 * PTW means we must fault if this S1 walk touches S2 Device
10212 * memory; otherwise we don't care about the attributes and can
10213 * save the S2 translation the effort of computing them.
10215 pcacheattrs
= &cacheattrs
;
10218 ret
= get_phys_addr_lpae(env
, addr
, MMU_DATA_LOAD
, ARMMMUIdx_Stage2
,
10220 &s2pa
, &txattrs
, &s2prot
, &s2size
, fi
,
10223 assert(fi
->type
!= ARMFault_None
);
10229 if (pcacheattrs
&& (pcacheattrs
->attrs
& 0xf0) == 0) {
10230 /* Access was to Device memory: generate Permission fault */
10231 fi
->type
= ARMFault_Permission
;
10242 /* All loads done in the course of a page table walk go through here. */
10243 static uint32_t arm_ldl_ptw(CPUState
*cs
, hwaddr addr
, bool is_secure
,
10244 ARMMMUIdx mmu_idx
, ARMMMUFaultInfo
*fi
)
10246 ARMCPU
*cpu
= ARM_CPU(cs
);
10247 CPUARMState
*env
= &cpu
->env
;
10248 MemTxAttrs attrs
= {};
10249 MemTxResult result
= MEMTX_OK
;
10253 attrs
.secure
= is_secure
;
10254 as
= arm_addressspace(cs
, attrs
);
10255 addr
= S1_ptw_translate(env
, mmu_idx
, addr
, attrs
, fi
);
10259 if (regime_translation_big_endian(env
, mmu_idx
)) {
10260 data
= address_space_ldl_be(as
, addr
, attrs
, &result
);
10262 data
= address_space_ldl_le(as
, addr
, attrs
, &result
);
10264 if (result
== MEMTX_OK
) {
10267 fi
->type
= ARMFault_SyncExternalOnWalk
;
10268 fi
->ea
= arm_extabort_type(result
);
10272 static uint64_t arm_ldq_ptw(CPUState
*cs
, hwaddr addr
, bool is_secure
,
10273 ARMMMUIdx mmu_idx
, ARMMMUFaultInfo
*fi
)
10275 ARMCPU
*cpu
= ARM_CPU(cs
);
10276 CPUARMState
*env
= &cpu
->env
;
10277 MemTxAttrs attrs
= {};
10278 MemTxResult result
= MEMTX_OK
;
10282 attrs
.secure
= is_secure
;
10283 as
= arm_addressspace(cs
, attrs
);
10284 addr
= S1_ptw_translate(env
, mmu_idx
, addr
, attrs
, fi
);
10288 if (regime_translation_big_endian(env
, mmu_idx
)) {
10289 data
= address_space_ldq_be(as
, addr
, attrs
, &result
);
10291 data
= address_space_ldq_le(as
, addr
, attrs
, &result
);
10293 if (result
== MEMTX_OK
) {
10296 fi
->type
= ARMFault_SyncExternalOnWalk
;
10297 fi
->ea
= arm_extabort_type(result
);
10301 static bool get_phys_addr_v5(CPUARMState
*env
, uint32_t address
,
10302 MMUAccessType access_type
, ARMMMUIdx mmu_idx
,
10303 hwaddr
*phys_ptr
, int *prot
,
10304 target_ulong
*page_size
,
10305 ARMMMUFaultInfo
*fi
)
10307 CPUState
*cs
= env_cpu(env
);
10318 /* Pagetable walk. */
10319 /* Lookup l1 descriptor. */
10320 if (!get_level1_table_address(env
, mmu_idx
, &table
, address
)) {
10321 /* Section translation fault if page walk is disabled by PD0 or PD1 */
10322 fi
->type
= ARMFault_Translation
;
10325 desc
= arm_ldl_ptw(cs
, table
, regime_is_secure(env
, mmu_idx
),
10327 if (fi
->type
!= ARMFault_None
) {
10331 domain
= (desc
>> 5) & 0x0f;
10332 if (regime_el(env
, mmu_idx
) == 1) {
10333 dacr
= env
->cp15
.dacr_ns
;
10335 dacr
= env
->cp15
.dacr_s
;
10337 domain_prot
= (dacr
>> (domain
* 2)) & 3;
10339 /* Section translation fault. */
10340 fi
->type
= ARMFault_Translation
;
10346 if (domain_prot
== 0 || domain_prot
== 2) {
10347 fi
->type
= ARMFault_Domain
;
10352 phys_addr
= (desc
& 0xfff00000) | (address
& 0x000fffff);
10353 ap
= (desc
>> 10) & 3;
10354 *page_size
= 1024 * 1024;
10356 /* Lookup l2 entry. */
10358 /* Coarse pagetable. */
10359 table
= (desc
& 0xfffffc00) | ((address
>> 10) & 0x3fc);
10361 /* Fine pagetable. */
10362 table
= (desc
& 0xfffff000) | ((address
>> 8) & 0xffc);
10364 desc
= arm_ldl_ptw(cs
, table
, regime_is_secure(env
, mmu_idx
),
10366 if (fi
->type
!= ARMFault_None
) {
10369 switch (desc
& 3) {
10370 case 0: /* Page translation fault. */
10371 fi
->type
= ARMFault_Translation
;
10373 case 1: /* 64k page. */
10374 phys_addr
= (desc
& 0xffff0000) | (address
& 0xffff);
10375 ap
= (desc
>> (4 + ((address
>> 13) & 6))) & 3;
10376 *page_size
= 0x10000;
10378 case 2: /* 4k page. */
10379 phys_addr
= (desc
& 0xfffff000) | (address
& 0xfff);
10380 ap
= (desc
>> (4 + ((address
>> 9) & 6))) & 3;
10381 *page_size
= 0x1000;
10383 case 3: /* 1k page, or ARMv6/XScale "extended small (4k) page" */
10385 /* ARMv6/XScale extended small page format */
10386 if (arm_feature(env
, ARM_FEATURE_XSCALE
)
10387 || arm_feature(env
, ARM_FEATURE_V6
)) {
10388 phys_addr
= (desc
& 0xfffff000) | (address
& 0xfff);
10389 *page_size
= 0x1000;
10391 /* UNPREDICTABLE in ARMv5; we choose to take a
10392 * page translation fault.
10394 fi
->type
= ARMFault_Translation
;
10398 phys_addr
= (desc
& 0xfffffc00) | (address
& 0x3ff);
10399 *page_size
= 0x400;
10401 ap
= (desc
>> 4) & 3;
10404 /* Never happens, but compiler isn't smart enough to tell. */
10408 *prot
= ap_to_rw_prot(env
, mmu_idx
, ap
, domain_prot
);
10409 *prot
|= *prot
? PAGE_EXEC
: 0;
10410 if (!(*prot
& (1 << access_type
))) {
10411 /* Access permission fault. */
10412 fi
->type
= ARMFault_Permission
;
10415 *phys_ptr
= phys_addr
;
10418 fi
->domain
= domain
;
10423 static bool get_phys_addr_v6(CPUARMState
*env
, uint32_t address
,
10424 MMUAccessType access_type
, ARMMMUIdx mmu_idx
,
10425 hwaddr
*phys_ptr
, MemTxAttrs
*attrs
, int *prot
,
10426 target_ulong
*page_size
, ARMMMUFaultInfo
*fi
)
10428 CPUState
*cs
= env_cpu(env
);
10442 /* Pagetable walk. */
10443 /* Lookup l1 descriptor. */
10444 if (!get_level1_table_address(env
, mmu_idx
, &table
, address
)) {
10445 /* Section translation fault if page walk is disabled by PD0 or PD1 */
10446 fi
->type
= ARMFault_Translation
;
10449 desc
= arm_ldl_ptw(cs
, table
, regime_is_secure(env
, mmu_idx
),
10451 if (fi
->type
!= ARMFault_None
) {
10455 if (type
== 0 || (type
== 3 && !arm_feature(env
, ARM_FEATURE_PXN
))) {
10456 /* Section translation fault, or attempt to use the encoding
10457 * which is Reserved on implementations without PXN.
10459 fi
->type
= ARMFault_Translation
;
10462 if ((type
== 1) || !(desc
& (1 << 18))) {
10463 /* Page or Section. */
10464 domain
= (desc
>> 5) & 0x0f;
10466 if (regime_el(env
, mmu_idx
) == 1) {
10467 dacr
= env
->cp15
.dacr_ns
;
10469 dacr
= env
->cp15
.dacr_s
;
10474 domain_prot
= (dacr
>> (domain
* 2)) & 3;
10475 if (domain_prot
== 0 || domain_prot
== 2) {
10476 /* Section or Page domain fault */
10477 fi
->type
= ARMFault_Domain
;
10481 if (desc
& (1 << 18)) {
10482 /* Supersection. */
10483 phys_addr
= (desc
& 0xff000000) | (address
& 0x00ffffff);
10484 phys_addr
|= (uint64_t)extract32(desc
, 20, 4) << 32;
10485 phys_addr
|= (uint64_t)extract32(desc
, 5, 4) << 36;
10486 *page_size
= 0x1000000;
10489 phys_addr
= (desc
& 0xfff00000) | (address
& 0x000fffff);
10490 *page_size
= 0x100000;
10492 ap
= ((desc
>> 10) & 3) | ((desc
>> 13) & 4);
10493 xn
= desc
& (1 << 4);
10495 ns
= extract32(desc
, 19, 1);
10497 if (arm_feature(env
, ARM_FEATURE_PXN
)) {
10498 pxn
= (desc
>> 2) & 1;
10500 ns
= extract32(desc
, 3, 1);
10501 /* Lookup l2 entry. */
10502 table
= (desc
& 0xfffffc00) | ((address
>> 10) & 0x3fc);
10503 desc
= arm_ldl_ptw(cs
, table
, regime_is_secure(env
, mmu_idx
),
10505 if (fi
->type
!= ARMFault_None
) {
10508 ap
= ((desc
>> 4) & 3) | ((desc
>> 7) & 4);
10509 switch (desc
& 3) {
10510 case 0: /* Page translation fault. */
10511 fi
->type
= ARMFault_Translation
;
10513 case 1: /* 64k page. */
10514 phys_addr
= (desc
& 0xffff0000) | (address
& 0xffff);
10515 xn
= desc
& (1 << 15);
10516 *page_size
= 0x10000;
10518 case 2: case 3: /* 4k page. */
10519 phys_addr
= (desc
& 0xfffff000) | (address
& 0xfff);
10521 *page_size
= 0x1000;
10524 /* Never happens, but compiler isn't smart enough to tell. */
10528 if (domain_prot
== 3) {
10529 *prot
= PAGE_READ
| PAGE_WRITE
| PAGE_EXEC
;
10531 if (pxn
&& !regime_is_user(env
, mmu_idx
)) {
10534 if (xn
&& access_type
== MMU_INST_FETCH
) {
10535 fi
->type
= ARMFault_Permission
;
10539 if (arm_feature(env
, ARM_FEATURE_V6K
) &&
10540 (regime_sctlr(env
, mmu_idx
) & SCTLR_AFE
)) {
10541 /* The simplified model uses AP[0] as an access control bit. */
10542 if ((ap
& 1) == 0) {
10543 /* Access flag fault. */
10544 fi
->type
= ARMFault_AccessFlag
;
10547 *prot
= simple_ap_to_rw_prot(env
, mmu_idx
, ap
>> 1);
10549 *prot
= ap_to_rw_prot(env
, mmu_idx
, ap
, domain_prot
);
10551 if (*prot
&& !xn
) {
10552 *prot
|= PAGE_EXEC
;
10554 if (!(*prot
& (1 << access_type
))) {
10555 /* Access permission fault. */
10556 fi
->type
= ARMFault_Permission
;
10561 /* The NS bit will (as required by the architecture) have no effect if
10562 * the CPU doesn't support TZ or this is a non-secure translation
10563 * regime, because the attribute will already be non-secure.
10565 attrs
->secure
= false;
10567 *phys_ptr
= phys_addr
;
10570 fi
->domain
= domain
;
10576 * check_s2_mmu_setup
10578 * @is_aa64: True if the translation regime is in AArch64 state
10579 * @startlevel: Suggested starting level
10580 * @inputsize: Bitsize of IPAs
10581 * @stride: Page-table stride (See the ARM ARM)
10583 * Returns true if the suggested S2 translation parameters are OK and
10586 static bool check_s2_mmu_setup(ARMCPU
*cpu
, bool is_aa64
, int level
,
10587 int inputsize
, int stride
)
10589 const int grainsize
= stride
+ 3;
10590 int startsizecheck
;
10592 /* Negative levels are never allowed. */
10597 startsizecheck
= inputsize
- ((3 - level
) * stride
+ grainsize
);
10598 if (startsizecheck
< 1 || startsizecheck
> stride
+ 4) {
10603 CPUARMState
*env
= &cpu
->env
;
10604 unsigned int pamax
= arm_pamax(cpu
);
10607 case 13: /* 64KB Pages. */
10608 if (level
== 0 || (level
== 1 && pamax
<= 42)) {
10612 case 11: /* 16KB Pages. */
10613 if (level
== 0 || (level
== 1 && pamax
<= 40)) {
10617 case 9: /* 4KB Pages. */
10618 if (level
== 0 && pamax
<= 42) {
10623 g_assert_not_reached();
10626 /* Inputsize checks. */
10627 if (inputsize
> pamax
&&
10628 (arm_el_is_aa64(env
, 1) || inputsize
> 40)) {
10629 /* This is CONSTRAINED UNPREDICTABLE and we choose to fault. */
10633 /* AArch32 only supports 4KB pages. Assert on that. */
10634 assert(stride
== 9);
10643 /* Translate from the 4-bit stage 2 representation of
10644 * memory attributes (without cache-allocation hints) to
10645 * the 8-bit representation of the stage 1 MAIR registers
10646 * (which includes allocation hints).
10648 * ref: shared/translation/attrs/S2AttrDecode()
10649 * .../S2ConvertAttrsHints()
10651 static uint8_t convert_stage2_attrs(CPUARMState
*env
, uint8_t s2attrs
)
10653 uint8_t hiattr
= extract32(s2attrs
, 2, 2);
10654 uint8_t loattr
= extract32(s2attrs
, 0, 2);
10655 uint8_t hihint
= 0, lohint
= 0;
10657 if (hiattr
!= 0) { /* normal memory */
10658 if ((env
->cp15
.hcr_el2
& HCR_CD
) != 0) { /* cache disabled */
10659 hiattr
= loattr
= 1; /* non-cacheable */
10661 if (hiattr
!= 1) { /* Write-through or write-back */
10662 hihint
= 3; /* RW allocate */
10664 if (loattr
!= 1) { /* Write-through or write-back */
10665 lohint
= 3; /* RW allocate */
10670 return (hiattr
<< 6) | (hihint
<< 4) | (loattr
<< 2) | lohint
;
10672 #endif /* !CONFIG_USER_ONLY */
10674 static int aa64_va_parameter_tbi(uint64_t tcr
, ARMMMUIdx mmu_idx
)
10676 if (regime_has_2_ranges(mmu_idx
)) {
10677 return extract64(tcr
, 37, 2);
10678 } else if (mmu_idx
== ARMMMUIdx_Stage2
) {
10679 return 0; /* VTCR_EL2 */
10681 /* Replicate the single TBI bit so we always have 2 bits. */
10682 return extract32(tcr
, 20, 1) * 3;
10686 static int aa64_va_parameter_tbid(uint64_t tcr
, ARMMMUIdx mmu_idx
)
10688 if (regime_has_2_ranges(mmu_idx
)) {
10689 return extract64(tcr
, 51, 2);
10690 } else if (mmu_idx
== ARMMMUIdx_Stage2
) {
10691 return 0; /* VTCR_EL2 */
10693 /* Replicate the single TBID bit so we always have 2 bits. */
10694 return extract32(tcr
, 29, 1) * 3;
10698 static int aa64_va_parameter_tcma(uint64_t tcr
, ARMMMUIdx mmu_idx
)
10700 if (regime_has_2_ranges(mmu_idx
)) {
10701 return extract64(tcr
, 57, 2);
10703 /* Replicate the single TCMA bit so we always have 2 bits. */
10704 return extract32(tcr
, 30, 1) * 3;
10708 ARMVAParameters
aa64_va_parameters(CPUARMState
*env
, uint64_t va
,
10709 ARMMMUIdx mmu_idx
, bool data
)
10711 uint64_t tcr
= regime_tcr(env
, mmu_idx
)->raw_tcr
;
10712 bool epd
, hpd
, using16k
, using64k
;
10713 int select
, tsz
, tbi
;
10715 if (!regime_has_2_ranges(mmu_idx
)) {
10717 tsz
= extract32(tcr
, 0, 6);
10718 using64k
= extract32(tcr
, 14, 1);
10719 using16k
= extract32(tcr
, 15, 1);
10720 if (mmu_idx
== ARMMMUIdx_Stage2
) {
10724 hpd
= extract32(tcr
, 24, 1);
10729 * Bit 55 is always between the two regions, and is canonical for
10730 * determining if address tagging is enabled.
10732 select
= extract64(va
, 55, 1);
10734 tsz
= extract32(tcr
, 0, 6);
10735 epd
= extract32(tcr
, 7, 1);
10736 using64k
= extract32(tcr
, 14, 1);
10737 using16k
= extract32(tcr
, 15, 1);
10738 hpd
= extract64(tcr
, 41, 1);
10740 int tg
= extract32(tcr
, 30, 2);
10741 using16k
= tg
== 1;
10742 using64k
= tg
== 3;
10743 tsz
= extract32(tcr
, 16, 6);
10744 epd
= extract32(tcr
, 23, 1);
10745 hpd
= extract64(tcr
, 42, 1);
10748 tsz
= MIN(tsz
, 39); /* TODO: ARMv8.4-TTST */
10749 tsz
= MAX(tsz
, 16); /* TODO: ARMv8.2-LVA */
10751 /* Present TBI as a composite with TBID. */
10752 tbi
= aa64_va_parameter_tbi(tcr
, mmu_idx
);
10754 tbi
&= ~aa64_va_parameter_tbid(tcr
, mmu_idx
);
10756 tbi
= (tbi
>> select
) & 1;
10758 return (ARMVAParameters
) {
10764 .using16k
= using16k
,
10765 .using64k
= using64k
,
10769 #ifndef CONFIG_USER_ONLY
10770 static ARMVAParameters
aa32_va_parameters(CPUARMState
*env
, uint32_t va
,
10773 uint64_t tcr
= regime_tcr(env
, mmu_idx
)->raw_tcr
;
10774 uint32_t el
= regime_el(env
, mmu_idx
);
10778 if (mmu_idx
== ARMMMUIdx_Stage2
) {
10780 bool sext
= extract32(tcr
, 4, 1);
10781 bool sign
= extract32(tcr
, 3, 1);
10784 * If the sign-extend bit is not the same as t0sz[3], the result
10785 * is unpredictable. Flag this as a guest error.
10787 if (sign
!= sext
) {
10788 qemu_log_mask(LOG_GUEST_ERROR
,
10789 "AArch32: VTCR.S / VTCR.T0SZ[3] mismatch\n");
10791 tsz
= sextract32(tcr
, 0, 4) + 8;
10795 } else if (el
== 2) {
10797 tsz
= extract32(tcr
, 0, 3);
10799 hpd
= extract64(tcr
, 24, 1);
10802 int t0sz
= extract32(tcr
, 0, 3);
10803 int t1sz
= extract32(tcr
, 16, 3);
10806 select
= va
> (0xffffffffu
>> t0sz
);
10808 /* Note that we will detect errors later. */
10809 select
= va
>= ~(0xffffffffu
>> t1sz
);
10813 epd
= extract32(tcr
, 7, 1);
10814 hpd
= extract64(tcr
, 41, 1);
10817 epd
= extract32(tcr
, 23, 1);
10818 hpd
= extract64(tcr
, 42, 1);
10820 /* For aarch32, hpd0 is not enabled without t2e as well. */
10821 hpd
&= extract32(tcr
, 6, 1);
10824 return (ARMVAParameters
) {
10833 * get_phys_addr_lpae: perform one stage of page table walk, LPAE format
10835 * Returns false if the translation was successful. Otherwise, phys_ptr, attrs,
10836 * prot and page_size may not be filled in, and the populated fsr value provides
10837 * information on why the translation aborted, in the format of a long-format
10838 * DFSR/IFSR fault register, with the following caveats:
10839 * * the WnR bit is never set (the caller must do this).
10841 * @env: CPUARMState
10842 * @address: virtual address to get physical address for
10843 * @access_type: MMU_DATA_LOAD, MMU_DATA_STORE or MMU_INST_FETCH
10844 * @mmu_idx: MMU index indicating required translation regime
10845 * @s1_is_el0: if @mmu_idx is ARMMMUIdx_Stage2 (so this is a stage 2 page table
10846 * walk), must be true if this is stage 2 of a stage 1+2 walk for an
10847 * EL0 access). If @mmu_idx is anything else, @s1_is_el0 is ignored.
10848 * @phys_ptr: set to the physical address corresponding to the virtual address
10849 * @attrs: set to the memory transaction attributes to use
10850 * @prot: set to the permissions for the page containing phys_ptr
10851 * @page_size_ptr: set to the size of the page containing phys_ptr
10852 * @fi: set to fault info if the translation fails
10853 * @cacheattrs: (if non-NULL) set to the cacheability/shareability attributes
10855 static bool get_phys_addr_lpae(CPUARMState
*env
, target_ulong address
,
10856 MMUAccessType access_type
, ARMMMUIdx mmu_idx
,
10858 hwaddr
*phys_ptr
, MemTxAttrs
*txattrs
, int *prot
,
10859 target_ulong
*page_size_ptr
,
10860 ARMMMUFaultInfo
*fi
, ARMCacheAttrs
*cacheattrs
)
10862 ARMCPU
*cpu
= env_archcpu(env
);
10863 CPUState
*cs
= CPU(cpu
);
10864 /* Read an LPAE long-descriptor translation table. */
10865 ARMFaultType fault_type
= ARMFault_Translation
;
10867 ARMVAParameters param
;
10869 hwaddr descaddr
, indexmask
, indexmask_grainsize
;
10870 uint32_t tableattrs
;
10871 target_ulong page_size
;
10874 int addrsize
, inputsize
;
10875 TCR
*tcr
= regime_tcr(env
, mmu_idx
);
10876 int ap
, ns
, xn
, pxn
;
10877 uint32_t el
= regime_el(env
, mmu_idx
);
10878 uint64_t descaddrmask
;
10879 bool aarch64
= arm_el_is_aa64(env
, el
);
10880 bool guarded
= false;
10882 /* TODO: This code does not support shareability levels. */
10884 param
= aa64_va_parameters(env
, address
, mmu_idx
,
10885 access_type
!= MMU_INST_FETCH
);
10887 addrsize
= 64 - 8 * param
.tbi
;
10888 inputsize
= 64 - param
.tsz
;
10890 param
= aa32_va_parameters(env
, address
, mmu_idx
);
10892 addrsize
= (mmu_idx
== ARMMMUIdx_Stage2
? 40 : 32);
10893 inputsize
= addrsize
- param
.tsz
;
10897 * We determined the region when collecting the parameters, but we
10898 * have not yet validated that the address is valid for the region.
10899 * Extract the top bits and verify that they all match select.
10901 * For aa32, if inputsize == addrsize, then we have selected the
10902 * region by exclusion in aa32_va_parameters and there is no more
10903 * validation to do here.
10905 if (inputsize
< addrsize
) {
10906 target_ulong top_bits
= sextract64(address
, inputsize
,
10907 addrsize
- inputsize
);
10908 if (-top_bits
!= param
.select
) {
10909 /* The gap between the two regions is a Translation fault */
10910 fault_type
= ARMFault_Translation
;
10915 if (param
.using64k
) {
10917 } else if (param
.using16k
) {
10923 /* Note that QEMU ignores shareability and cacheability attributes,
10924 * so we don't need to do anything with the SH, ORGN, IRGN fields
10925 * in the TTBCR. Similarly, TTBCR:A1 selects whether we get the
10926 * ASID from TTBR0 or TTBR1, but QEMU's TLB doesn't currently
10927 * implement any ASID-like capability so we can ignore it (instead
10928 * we will always flush the TLB any time the ASID is changed).
10930 ttbr
= regime_ttbr(env
, mmu_idx
, param
.select
);
10932 /* Here we should have set up all the parameters for the translation:
10933 * inputsize, ttbr, epd, stride, tbi
10937 /* Translation table walk disabled => Translation fault on TLB miss
10938 * Note: This is always 0 on 64-bit EL2 and EL3.
10943 if (mmu_idx
!= ARMMMUIdx_Stage2
) {
10944 /* The starting level depends on the virtual address size (which can
10945 * be up to 48 bits) and the translation granule size. It indicates
10946 * the number of strides (stride bits at a time) needed to
10947 * consume the bits of the input address. In the pseudocode this is:
10948 * level = 4 - RoundUp((inputsize - grainsize) / stride)
10949 * where their 'inputsize' is our 'inputsize', 'grainsize' is
10950 * our 'stride + 3' and 'stride' is our 'stride'.
10951 * Applying the usual "rounded up m/n is (m+n-1)/n" and simplifying:
10952 * = 4 - (inputsize - stride - 3 + stride - 1) / stride
10953 * = 4 - (inputsize - 4) / stride;
10955 level
= 4 - (inputsize
- 4) / stride
;
10957 /* For stage 2 translations the starting level is specified by the
10958 * VTCR_EL2.SL0 field (whose interpretation depends on the page size)
10960 uint32_t sl0
= extract32(tcr
->raw_tcr
, 6, 2);
10961 uint32_t startlevel
;
10964 if (!aarch64
|| stride
== 9) {
10965 /* AArch32 or 4KB pages */
10966 startlevel
= 2 - sl0
;
10968 /* 16KB or 64KB pages */
10969 startlevel
= 3 - sl0
;
10972 /* Check that the starting level is valid. */
10973 ok
= check_s2_mmu_setup(cpu
, aarch64
, startlevel
,
10974 inputsize
, stride
);
10976 fault_type
= ARMFault_Translation
;
10979 level
= startlevel
;
10982 indexmask_grainsize
= (1ULL << (stride
+ 3)) - 1;
10983 indexmask
= (1ULL << (inputsize
- (stride
* (4 - level
)))) - 1;
10985 /* Now we can extract the actual base address from the TTBR */
10986 descaddr
= extract64(ttbr
, 0, 48);
10988 * We rely on this masking to clear the RES0 bits at the bottom of the TTBR
10989 * and also to mask out CnP (bit 0) which could validly be non-zero.
10991 descaddr
&= ~indexmask
;
10993 /* The address field in the descriptor goes up to bit 39 for ARMv7
10994 * but up to bit 47 for ARMv8, but we use the descaddrmask
10995 * up to bit 39 for AArch32, because we don't need other bits in that case
10996 * to construct next descriptor address (anyway they should be all zeroes).
10998 descaddrmask
= ((1ull << (aarch64
? 48 : 40)) - 1) &
10999 ~indexmask_grainsize
;
11001 /* Secure accesses start with the page table in secure memory and
11002 * can be downgraded to non-secure at any step. Non-secure accesses
11003 * remain non-secure. We implement this by just ORing in the NSTable/NS
11004 * bits at each step.
11006 tableattrs
= regime_is_secure(env
, mmu_idx
) ? 0 : (1 << 4);
11008 uint64_t descriptor
;
11011 descaddr
|= (address
>> (stride
* (4 - level
))) & indexmask
;
11013 nstable
= extract32(tableattrs
, 4, 1);
11014 descriptor
= arm_ldq_ptw(cs
, descaddr
, !nstable
, mmu_idx
, fi
);
11015 if (fi
->type
!= ARMFault_None
) {
11019 if (!(descriptor
& 1) ||
11020 (!(descriptor
& 2) && (level
== 3))) {
11021 /* Invalid, or the Reserved level 3 encoding */
11024 descaddr
= descriptor
& descaddrmask
;
11026 if ((descriptor
& 2) && (level
< 3)) {
11027 /* Table entry. The top five bits are attributes which may
11028 * propagate down through lower levels of the table (and
11029 * which are all arranged so that 0 means "no effect", so
11030 * we can gather them up by ORing in the bits at each level).
11032 tableattrs
|= extract64(descriptor
, 59, 5);
11034 indexmask
= indexmask_grainsize
;
11037 /* Block entry at level 1 or 2, or page entry at level 3.
11038 * These are basically the same thing, although the number
11039 * of bits we pull in from the vaddr varies.
11041 page_size
= (1ULL << ((stride
* (4 - level
)) + 3));
11042 descaddr
|= (address
& (page_size
- 1));
11043 /* Extract attributes from the descriptor */
11044 attrs
= extract64(descriptor
, 2, 10)
11045 | (extract64(descriptor
, 52, 12) << 10);
11047 if (mmu_idx
== ARMMMUIdx_Stage2
) {
11048 /* Stage 2 table descriptors do not include any attribute fields */
11051 /* Merge in attributes from table descriptors */
11052 attrs
|= nstable
<< 3; /* NS */
11053 guarded
= extract64(descriptor
, 50, 1); /* GP */
11055 /* HPD disables all the table attributes except NSTable. */
11058 attrs
|= extract32(tableattrs
, 0, 2) << 11; /* XN, PXN */
11059 /* The sense of AP[1] vs APTable[0] is reversed, as APTable[0] == 1
11060 * means "force PL1 access only", which means forcing AP[1] to 0.
11062 attrs
&= ~(extract32(tableattrs
, 2, 1) << 4); /* !APT[0] => AP[1] */
11063 attrs
|= extract32(tableattrs
, 3, 1) << 5; /* APT[1] => AP[2] */
11066 /* Here descaddr is the final physical address, and attributes
11067 * are all in attrs.
11069 fault_type
= ARMFault_AccessFlag
;
11070 if ((attrs
& (1 << 8)) == 0) {
11075 ap
= extract32(attrs
, 4, 2);
11077 if (mmu_idx
== ARMMMUIdx_Stage2
) {
11079 xn
= extract32(attrs
, 11, 2);
11080 *prot
= get_S2prot(env
, ap
, xn
, s1_is_el0
);
11082 ns
= extract32(attrs
, 3, 1);
11083 xn
= extract32(attrs
, 12, 1);
11084 pxn
= extract32(attrs
, 11, 1);
11085 *prot
= get_S1prot(env
, mmu_idx
, aarch64
, ap
, ns
, xn
, pxn
);
11088 fault_type
= ARMFault_Permission
;
11089 if (!(*prot
& (1 << access_type
))) {
11094 /* The NS bit will (as required by the architecture) have no effect if
11095 * the CPU doesn't support TZ or this is a non-secure translation
11096 * regime, because the attribute will already be non-secure.
11098 txattrs
->secure
= false;
11100 /* When in aarch64 mode, and BTI is enabled, remember GP in the IOTLB. */
11101 if (aarch64
&& guarded
&& cpu_isar_feature(aa64_bti
, cpu
)) {
11102 arm_tlb_bti_gp(txattrs
) = true;
11105 if (mmu_idx
== ARMMMUIdx_Stage2
) {
11106 cacheattrs
->attrs
= convert_stage2_attrs(env
, extract32(attrs
, 0, 4));
11108 /* Index into MAIR registers for cache attributes */
11109 uint8_t attrindx
= extract32(attrs
, 0, 3);
11110 uint64_t mair
= env
->cp15
.mair_el
[regime_el(env
, mmu_idx
)];
11111 assert(attrindx
<= 7);
11112 cacheattrs
->attrs
= extract64(mair
, attrindx
* 8, 8);
11114 cacheattrs
->shareability
= extract32(attrs
, 6, 2);
11116 *phys_ptr
= descaddr
;
11117 *page_size_ptr
= page_size
;
11121 fi
->type
= fault_type
;
11123 /* Tag the error as S2 for failed S1 PTW at S2 or ordinary S2. */
11124 fi
->stage2
= fi
->s1ptw
|| (mmu_idx
== ARMMMUIdx_Stage2
);
11128 static inline void get_phys_addr_pmsav7_default(CPUARMState
*env
,
11130 int32_t address
, int *prot
)
11132 if (!arm_feature(env
, ARM_FEATURE_M
)) {
11133 *prot
= PAGE_READ
| PAGE_WRITE
;
11135 case 0xF0000000 ... 0xFFFFFFFF:
11136 if (regime_sctlr(env
, mmu_idx
) & SCTLR_V
) {
11137 /* hivecs execing is ok */
11138 *prot
|= PAGE_EXEC
;
11141 case 0x00000000 ... 0x7FFFFFFF:
11142 *prot
|= PAGE_EXEC
;
11146 /* Default system address map for M profile cores.
11147 * The architecture specifies which regions are execute-never;
11148 * at the MPU level no other checks are defined.
11151 case 0x00000000 ... 0x1fffffff: /* ROM */
11152 case 0x20000000 ... 0x3fffffff: /* SRAM */
11153 case 0x60000000 ... 0x7fffffff: /* RAM */
11154 case 0x80000000 ... 0x9fffffff: /* RAM */
11155 *prot
= PAGE_READ
| PAGE_WRITE
| PAGE_EXEC
;
11157 case 0x40000000 ... 0x5fffffff: /* Peripheral */
11158 case 0xa0000000 ... 0xbfffffff: /* Device */
11159 case 0xc0000000 ... 0xdfffffff: /* Device */
11160 case 0xe0000000 ... 0xffffffff: /* System */
11161 *prot
= PAGE_READ
| PAGE_WRITE
;
11164 g_assert_not_reached();
11169 static bool pmsav7_use_background_region(ARMCPU
*cpu
,
11170 ARMMMUIdx mmu_idx
, bool is_user
)
11172 /* Return true if we should use the default memory map as a
11173 * "background" region if there are no hits against any MPU regions.
11175 CPUARMState
*env
= &cpu
->env
;
11181 if (arm_feature(env
, ARM_FEATURE_M
)) {
11182 return env
->v7m
.mpu_ctrl
[regime_is_secure(env
, mmu_idx
)]
11183 & R_V7M_MPU_CTRL_PRIVDEFENA_MASK
;
11185 return regime_sctlr(env
, mmu_idx
) & SCTLR_BR
;
11189 static inline bool m_is_ppb_region(CPUARMState
*env
, uint32_t address
)
11191 /* True if address is in the M profile PPB region 0xe0000000 - 0xe00fffff */
11192 return arm_feature(env
, ARM_FEATURE_M
) &&
11193 extract32(address
, 20, 12) == 0xe00;
11196 static inline bool m_is_system_region(CPUARMState
*env
, uint32_t address
)
11198 /* True if address is in the M profile system region
11199 * 0xe0000000 - 0xffffffff
11201 return arm_feature(env
, ARM_FEATURE_M
) && extract32(address
, 29, 3) == 0x7;
11204 static bool get_phys_addr_pmsav7(CPUARMState
*env
, uint32_t address
,
11205 MMUAccessType access_type
, ARMMMUIdx mmu_idx
,
11206 hwaddr
*phys_ptr
, int *prot
,
11207 target_ulong
*page_size
,
11208 ARMMMUFaultInfo
*fi
)
11210 ARMCPU
*cpu
= env_archcpu(env
);
11212 bool is_user
= regime_is_user(env
, mmu_idx
);
11214 *phys_ptr
= address
;
11215 *page_size
= TARGET_PAGE_SIZE
;
11218 if (regime_translation_disabled(env
, mmu_idx
) ||
11219 m_is_ppb_region(env
, address
)) {
11220 /* MPU disabled or M profile PPB access: use default memory map.
11221 * The other case which uses the default memory map in the
11222 * v7M ARM ARM pseudocode is exception vector reads from the vector
11223 * table. In QEMU those accesses are done in arm_v7m_load_vector(),
11224 * which always does a direct read using address_space_ldl(), rather
11225 * than going via this function, so we don't need to check that here.
11227 get_phys_addr_pmsav7_default(env
, mmu_idx
, address
, prot
);
11228 } else { /* MPU enabled */
11229 for (n
= (int)cpu
->pmsav7_dregion
- 1; n
>= 0; n
--) {
11230 /* region search */
11231 uint32_t base
= env
->pmsav7
.drbar
[n
];
11232 uint32_t rsize
= extract32(env
->pmsav7
.drsr
[n
], 1, 5);
11234 bool srdis
= false;
11236 if (!(env
->pmsav7
.drsr
[n
] & 0x1)) {
11241 qemu_log_mask(LOG_GUEST_ERROR
,
11242 "DRSR[%d]: Rsize field cannot be 0\n", n
);
11246 rmask
= (1ull << rsize
) - 1;
11248 if (base
& rmask
) {
11249 qemu_log_mask(LOG_GUEST_ERROR
,
11250 "DRBAR[%d]: 0x%" PRIx32
" misaligned "
11251 "to DRSR region size, mask = 0x%" PRIx32
"\n",
11256 if (address
< base
|| address
> base
+ rmask
) {
11258 * Address not in this region. We must check whether the
11259 * region covers addresses in the same page as our address.
11260 * In that case we must not report a size that covers the
11261 * whole page for a subsequent hit against a different MPU
11262 * region or the background region, because it would result in
11263 * incorrect TLB hits for subsequent accesses to addresses that
11264 * are in this MPU region.
11266 if (ranges_overlap(base
, rmask
,
11267 address
& TARGET_PAGE_MASK
,
11268 TARGET_PAGE_SIZE
)) {
11274 /* Region matched */
11276 if (rsize
>= 8) { /* no subregions for regions < 256 bytes */
11278 uint32_t srdis_mask
;
11280 rsize
-= 3; /* sub region size (power of 2) */
11281 snd
= ((address
- base
) >> rsize
) & 0x7;
11282 srdis
= extract32(env
->pmsav7
.drsr
[n
], snd
+ 8, 1);
11284 srdis_mask
= srdis
? 0x3 : 0x0;
11285 for (i
= 2; i
<= 8 && rsize
< TARGET_PAGE_BITS
; i
*= 2) {
11286 /* This will check in groups of 2, 4 and then 8, whether
11287 * the subregion bits are consistent. rsize is incremented
11288 * back up to give the region size, considering consistent
11289 * adjacent subregions as one region. Stop testing if rsize
11290 * is already big enough for an entire QEMU page.
11292 int snd_rounded
= snd
& ~(i
- 1);
11293 uint32_t srdis_multi
= extract32(env
->pmsav7
.drsr
[n
],
11294 snd_rounded
+ 8, i
);
11295 if (srdis_mask
^ srdis_multi
) {
11298 srdis_mask
= (srdis_mask
<< i
) | srdis_mask
;
11305 if (rsize
< TARGET_PAGE_BITS
) {
11306 *page_size
= 1 << rsize
;
11311 if (n
== -1) { /* no hits */
11312 if (!pmsav7_use_background_region(cpu
, mmu_idx
, is_user
)) {
11313 /* background fault */
11314 fi
->type
= ARMFault_Background
;
11317 get_phys_addr_pmsav7_default(env
, mmu_idx
, address
, prot
);
11318 } else { /* a MPU hit! */
11319 uint32_t ap
= extract32(env
->pmsav7
.dracr
[n
], 8, 3);
11320 uint32_t xn
= extract32(env
->pmsav7
.dracr
[n
], 12, 1);
11322 if (m_is_system_region(env
, address
)) {
11323 /* System space is always execute never */
11327 if (is_user
) { /* User mode AP bit decoding */
11332 break; /* no access */
11334 *prot
|= PAGE_WRITE
;
11338 *prot
|= PAGE_READ
| PAGE_EXEC
;
11341 /* for v7M, same as 6; for R profile a reserved value */
11342 if (arm_feature(env
, ARM_FEATURE_M
)) {
11343 *prot
|= PAGE_READ
| PAGE_EXEC
;
11348 qemu_log_mask(LOG_GUEST_ERROR
,
11349 "DRACR[%d]: Bad value for AP bits: 0x%"
11350 PRIx32
"\n", n
, ap
);
11352 } else { /* Priv. mode AP bits decoding */
11355 break; /* no access */
11359 *prot
|= PAGE_WRITE
;
11363 *prot
|= PAGE_READ
| PAGE_EXEC
;
11366 /* for v7M, same as 6; for R profile a reserved value */
11367 if (arm_feature(env
, ARM_FEATURE_M
)) {
11368 *prot
|= PAGE_READ
| PAGE_EXEC
;
11373 qemu_log_mask(LOG_GUEST_ERROR
,
11374 "DRACR[%d]: Bad value for AP bits: 0x%"
11375 PRIx32
"\n", n
, ap
);
11379 /* execute never */
11381 *prot
&= ~PAGE_EXEC
;
11386 fi
->type
= ARMFault_Permission
;
11388 return !(*prot
& (1 << access_type
));
11391 static bool v8m_is_sau_exempt(CPUARMState
*env
,
11392 uint32_t address
, MMUAccessType access_type
)
11394 /* The architecture specifies that certain address ranges are
11395 * exempt from v8M SAU/IDAU checks.
11398 (access_type
== MMU_INST_FETCH
&& m_is_system_region(env
, address
)) ||
11399 (address
>= 0xe0000000 && address
<= 0xe0002fff) ||
11400 (address
>= 0xe000e000 && address
<= 0xe000efff) ||
11401 (address
>= 0xe002e000 && address
<= 0xe002efff) ||
11402 (address
>= 0xe0040000 && address
<= 0xe0041fff) ||
11403 (address
>= 0xe00ff000 && address
<= 0xe00fffff);
11406 void v8m_security_lookup(CPUARMState
*env
, uint32_t address
,
11407 MMUAccessType access_type
, ARMMMUIdx mmu_idx
,
11408 V8M_SAttributes
*sattrs
)
11410 /* Look up the security attributes for this address. Compare the
11411 * pseudocode SecurityCheck() function.
11412 * We assume the caller has zero-initialized *sattrs.
11414 ARMCPU
*cpu
= env_archcpu(env
);
11416 bool idau_exempt
= false, idau_ns
= true, idau_nsc
= true;
11417 int idau_region
= IREGION_NOTVALID
;
11418 uint32_t addr_page_base
= address
& TARGET_PAGE_MASK
;
11419 uint32_t addr_page_limit
= addr_page_base
+ (TARGET_PAGE_SIZE
- 1);
11422 IDAUInterfaceClass
*iic
= IDAU_INTERFACE_GET_CLASS(cpu
->idau
);
11423 IDAUInterface
*ii
= IDAU_INTERFACE(cpu
->idau
);
11425 iic
->check(ii
, address
, &idau_region
, &idau_exempt
, &idau_ns
,
11429 if (access_type
== MMU_INST_FETCH
&& extract32(address
, 28, 4) == 0xf) {
11430 /* 0xf0000000..0xffffffff is always S for insn fetches */
11434 if (idau_exempt
|| v8m_is_sau_exempt(env
, address
, access_type
)) {
11435 sattrs
->ns
= !regime_is_secure(env
, mmu_idx
);
11439 if (idau_region
!= IREGION_NOTVALID
) {
11440 sattrs
->irvalid
= true;
11441 sattrs
->iregion
= idau_region
;
11444 switch (env
->sau
.ctrl
& 3) {
11445 case 0: /* SAU.ENABLE == 0, SAU.ALLNS == 0 */
11447 case 2: /* SAU.ENABLE == 0, SAU.ALLNS == 1 */
11450 default: /* SAU.ENABLE == 1 */
11451 for (r
= 0; r
< cpu
->sau_sregion
; r
++) {
11452 if (env
->sau
.rlar
[r
] & 1) {
11453 uint32_t base
= env
->sau
.rbar
[r
] & ~0x1f;
11454 uint32_t limit
= env
->sau
.rlar
[r
] | 0x1f;
11456 if (base
<= address
&& limit
>= address
) {
11457 if (base
> addr_page_base
|| limit
< addr_page_limit
) {
11458 sattrs
->subpage
= true;
11460 if (sattrs
->srvalid
) {
11461 /* If we hit in more than one region then we must report
11462 * as Secure, not NS-Callable, with no valid region
11465 sattrs
->ns
= false;
11466 sattrs
->nsc
= false;
11467 sattrs
->sregion
= 0;
11468 sattrs
->srvalid
= false;
11471 if (env
->sau
.rlar
[r
] & 2) {
11472 sattrs
->nsc
= true;
11476 sattrs
->srvalid
= true;
11477 sattrs
->sregion
= r
;
11481 * Address not in this region. We must check whether the
11482 * region covers addresses in the same page as our address.
11483 * In that case we must not report a size that covers the
11484 * whole page for a subsequent hit against a different MPU
11485 * region or the background region, because it would result
11486 * in incorrect TLB hits for subsequent accesses to
11487 * addresses that are in this MPU region.
11489 if (limit
>= base
&&
11490 ranges_overlap(base
, limit
- base
+ 1,
11492 TARGET_PAGE_SIZE
)) {
11493 sattrs
->subpage
= true;
11502 * The IDAU will override the SAU lookup results if it specifies
11503 * higher security than the SAU does.
11506 if (sattrs
->ns
|| (!idau_nsc
&& sattrs
->nsc
)) {
11507 sattrs
->ns
= false;
11508 sattrs
->nsc
= idau_nsc
;
11513 bool pmsav8_mpu_lookup(CPUARMState
*env
, uint32_t address
,
11514 MMUAccessType access_type
, ARMMMUIdx mmu_idx
,
11515 hwaddr
*phys_ptr
, MemTxAttrs
*txattrs
,
11516 int *prot
, bool *is_subpage
,
11517 ARMMMUFaultInfo
*fi
, uint32_t *mregion
)
11519 /* Perform a PMSAv8 MPU lookup (without also doing the SAU check
11520 * that a full phys-to-virt translation does).
11521 * mregion is (if not NULL) set to the region number which matched,
11522 * or -1 if no region number is returned (MPU off, address did not
11523 * hit a region, address hit in multiple regions).
11524 * We set is_subpage to true if the region hit doesn't cover the
11525 * entire TARGET_PAGE the address is within.
11527 ARMCPU
*cpu
= env_archcpu(env
);
11528 bool is_user
= regime_is_user(env
, mmu_idx
);
11529 uint32_t secure
= regime_is_secure(env
, mmu_idx
);
11531 int matchregion
= -1;
11533 uint32_t addr_page_base
= address
& TARGET_PAGE_MASK
;
11534 uint32_t addr_page_limit
= addr_page_base
+ (TARGET_PAGE_SIZE
- 1);
11536 *is_subpage
= false;
11537 *phys_ptr
= address
;
11543 /* Unlike the ARM ARM pseudocode, we don't need to check whether this
11544 * was an exception vector read from the vector table (which is always
11545 * done using the default system address map), because those accesses
11546 * are done in arm_v7m_load_vector(), which always does a direct
11547 * read using address_space_ldl(), rather than going via this function.
11549 if (regime_translation_disabled(env
, mmu_idx
)) { /* MPU disabled */
11551 } else if (m_is_ppb_region(env
, address
)) {
11554 if (pmsav7_use_background_region(cpu
, mmu_idx
, is_user
)) {
11558 for (n
= (int)cpu
->pmsav7_dregion
- 1; n
>= 0; n
--) {
11559 /* region search */
11560 /* Note that the base address is bits [31:5] from the register
11561 * with bits [4:0] all zeroes, but the limit address is bits
11562 * [31:5] from the register with bits [4:0] all ones.
11564 uint32_t base
= env
->pmsav8
.rbar
[secure
][n
] & ~0x1f;
11565 uint32_t limit
= env
->pmsav8
.rlar
[secure
][n
] | 0x1f;
11567 if (!(env
->pmsav8
.rlar
[secure
][n
] & 0x1)) {
11568 /* Region disabled */
11572 if (address
< base
|| address
> limit
) {
11574 * Address not in this region. We must check whether the
11575 * region covers addresses in the same page as our address.
11576 * In that case we must not report a size that covers the
11577 * whole page for a subsequent hit against a different MPU
11578 * region or the background region, because it would result in
11579 * incorrect TLB hits for subsequent accesses to addresses that
11580 * are in this MPU region.
11582 if (limit
>= base
&&
11583 ranges_overlap(base
, limit
- base
+ 1,
11585 TARGET_PAGE_SIZE
)) {
11586 *is_subpage
= true;
11591 if (base
> addr_page_base
|| limit
< addr_page_limit
) {
11592 *is_subpage
= true;
11595 if (matchregion
!= -1) {
11596 /* Multiple regions match -- always a failure (unlike
11597 * PMSAv7 where highest-numbered-region wins)
11599 fi
->type
= ARMFault_Permission
;
11610 /* background fault */
11611 fi
->type
= ARMFault_Background
;
11615 if (matchregion
== -1) {
11616 /* hit using the background region */
11617 get_phys_addr_pmsav7_default(env
, mmu_idx
, address
, prot
);
11619 uint32_t ap
= extract32(env
->pmsav8
.rbar
[secure
][matchregion
], 1, 2);
11620 uint32_t xn
= extract32(env
->pmsav8
.rbar
[secure
][matchregion
], 0, 1);
11622 if (m_is_system_region(env
, address
)) {
11623 /* System space is always execute never */
11627 *prot
= simple_ap_to_rw_prot(env
, mmu_idx
, ap
);
11628 if (*prot
&& !xn
) {
11629 *prot
|= PAGE_EXEC
;
11631 /* We don't need to look the attribute up in the MAIR0/MAIR1
11632 * registers because that only tells us about cacheability.
11635 *mregion
= matchregion
;
11639 fi
->type
= ARMFault_Permission
;
11641 return !(*prot
& (1 << access_type
));
11645 static bool get_phys_addr_pmsav8(CPUARMState
*env
, uint32_t address
,
11646 MMUAccessType access_type
, ARMMMUIdx mmu_idx
,
11647 hwaddr
*phys_ptr
, MemTxAttrs
*txattrs
,
11648 int *prot
, target_ulong
*page_size
,
11649 ARMMMUFaultInfo
*fi
)
11651 uint32_t secure
= regime_is_secure(env
, mmu_idx
);
11652 V8M_SAttributes sattrs
= {};
11654 bool mpu_is_subpage
;
11656 if (arm_feature(env
, ARM_FEATURE_M_SECURITY
)) {
11657 v8m_security_lookup(env
, address
, access_type
, mmu_idx
, &sattrs
);
11658 if (access_type
== MMU_INST_FETCH
) {
11659 /* Instruction fetches always use the MMU bank and the
11660 * transaction attribute determined by the fetch address,
11661 * regardless of CPU state. This is painful for QEMU
11662 * to handle, because it would mean we need to encode
11663 * into the mmu_idx not just the (user, negpri) information
11664 * for the current security state but also that for the
11665 * other security state, which would balloon the number
11666 * of mmu_idx values needed alarmingly.
11667 * Fortunately we can avoid this because it's not actually
11668 * possible to arbitrarily execute code from memory with
11669 * the wrong security attribute: it will always generate
11670 * an exception of some kind or another, apart from the
11671 * special case of an NS CPU executing an SG instruction
11672 * in S&NSC memory. So we always just fail the translation
11673 * here and sort things out in the exception handler
11674 * (including possibly emulating an SG instruction).
11676 if (sattrs
.ns
!= !secure
) {
11678 fi
->type
= ARMFault_QEMU_NSCExec
;
11680 fi
->type
= ARMFault_QEMU_SFault
;
11682 *page_size
= sattrs
.subpage
? 1 : TARGET_PAGE_SIZE
;
11683 *phys_ptr
= address
;
11688 /* For data accesses we always use the MMU bank indicated
11689 * by the current CPU state, but the security attributes
11690 * might downgrade a secure access to nonsecure.
11693 txattrs
->secure
= false;
11694 } else if (!secure
) {
11695 /* NS access to S memory must fault.
11696 * Architecturally we should first check whether the
11697 * MPU information for this address indicates that we
11698 * are doing an unaligned access to Device memory, which
11699 * should generate a UsageFault instead. QEMU does not
11700 * currently check for that kind of unaligned access though.
11701 * If we added it we would need to do so as a special case
11702 * for M_FAKE_FSR_SFAULT in arm_v7m_cpu_do_interrupt().
11704 fi
->type
= ARMFault_QEMU_SFault
;
11705 *page_size
= sattrs
.subpage
? 1 : TARGET_PAGE_SIZE
;
11706 *phys_ptr
= address
;
11713 ret
= pmsav8_mpu_lookup(env
, address
, access_type
, mmu_idx
, phys_ptr
,
11714 txattrs
, prot
, &mpu_is_subpage
, fi
, NULL
);
11715 *page_size
= sattrs
.subpage
|| mpu_is_subpage
? 1 : TARGET_PAGE_SIZE
;
11719 static bool get_phys_addr_pmsav5(CPUARMState
*env
, uint32_t address
,
11720 MMUAccessType access_type
, ARMMMUIdx mmu_idx
,
11721 hwaddr
*phys_ptr
, int *prot
,
11722 ARMMMUFaultInfo
*fi
)
11727 bool is_user
= regime_is_user(env
, mmu_idx
);
11729 if (regime_translation_disabled(env
, mmu_idx
)) {
11730 /* MPU disabled. */
11731 *phys_ptr
= address
;
11732 *prot
= PAGE_READ
| PAGE_WRITE
| PAGE_EXEC
;
11736 *phys_ptr
= address
;
11737 for (n
= 7; n
>= 0; n
--) {
11738 base
= env
->cp15
.c6_region
[n
];
11739 if ((base
& 1) == 0) {
11742 mask
= 1 << ((base
>> 1) & 0x1f);
11743 /* Keep this shift separate from the above to avoid an
11744 (undefined) << 32. */
11745 mask
= (mask
<< 1) - 1;
11746 if (((base
^ address
) & ~mask
) == 0) {
11751 fi
->type
= ARMFault_Background
;
11755 if (access_type
== MMU_INST_FETCH
) {
11756 mask
= env
->cp15
.pmsav5_insn_ap
;
11758 mask
= env
->cp15
.pmsav5_data_ap
;
11760 mask
= (mask
>> (n
* 4)) & 0xf;
11763 fi
->type
= ARMFault_Permission
;
11768 fi
->type
= ARMFault_Permission
;
11772 *prot
= PAGE_READ
| PAGE_WRITE
;
11777 *prot
|= PAGE_WRITE
;
11781 *prot
= PAGE_READ
| PAGE_WRITE
;
11785 fi
->type
= ARMFault_Permission
;
11795 /* Bad permission. */
11796 fi
->type
= ARMFault_Permission
;
11800 *prot
|= PAGE_EXEC
;
11804 /* Combine either inner or outer cacheability attributes for normal
11805 * memory, according to table D4-42 and pseudocode procedure
11806 * CombineS1S2AttrHints() of ARM DDI 0487B.b (the ARMv8 ARM).
11808 * NB: only stage 1 includes allocation hints (RW bits), leading to
11811 static uint8_t combine_cacheattr_nibble(uint8_t s1
, uint8_t s2
)
11813 if (s1
== 4 || s2
== 4) {
11814 /* non-cacheable has precedence */
11816 } else if (extract32(s1
, 2, 2) == 0 || extract32(s1
, 2, 2) == 2) {
11817 /* stage 1 write-through takes precedence */
11819 } else if (extract32(s2
, 2, 2) == 2) {
11820 /* stage 2 write-through takes precedence, but the allocation hint
11821 * is still taken from stage 1
11823 return (2 << 2) | extract32(s1
, 0, 2);
11824 } else { /* write-back */
11829 /* Combine S1 and S2 cacheability/shareability attributes, per D4.5.4
11830 * and CombineS1S2Desc()
11832 * @s1: Attributes from stage 1 walk
11833 * @s2: Attributes from stage 2 walk
11835 static ARMCacheAttrs
combine_cacheattrs(ARMCacheAttrs s1
, ARMCacheAttrs s2
)
11837 uint8_t s1lo
, s2lo
, s1hi
, s2hi
;
11839 bool tagged
= false;
11841 if (s1
.attrs
== 0xf0) {
11846 s1lo
= extract32(s1
.attrs
, 0, 4);
11847 s2lo
= extract32(s2
.attrs
, 0, 4);
11848 s1hi
= extract32(s1
.attrs
, 4, 4);
11849 s2hi
= extract32(s2
.attrs
, 4, 4);
11851 /* Combine shareability attributes (table D4-43) */
11852 if (s1
.shareability
== 2 || s2
.shareability
== 2) {
11853 /* if either are outer-shareable, the result is outer-shareable */
11854 ret
.shareability
= 2;
11855 } else if (s1
.shareability
== 3 || s2
.shareability
== 3) {
11856 /* if either are inner-shareable, the result is inner-shareable */
11857 ret
.shareability
= 3;
11859 /* both non-shareable */
11860 ret
.shareability
= 0;
11863 /* Combine memory type and cacheability attributes */
11864 if (s1hi
== 0 || s2hi
== 0) {
11865 /* Device has precedence over normal */
11866 if (s1lo
== 0 || s2lo
== 0) {
11867 /* nGnRnE has precedence over anything */
11869 } else if (s1lo
== 4 || s2lo
== 4) {
11870 /* non-Reordering has precedence over Reordering */
11871 ret
.attrs
= 4; /* nGnRE */
11872 } else if (s1lo
== 8 || s2lo
== 8) {
11873 /* non-Gathering has precedence over Gathering */
11874 ret
.attrs
= 8; /* nGRE */
11876 ret
.attrs
= 0xc; /* GRE */
11879 /* Any location for which the resultant memory type is any
11880 * type of Device memory is always treated as Outer Shareable.
11882 ret
.shareability
= 2;
11883 } else { /* Normal memory */
11884 /* Outer/inner cacheability combine independently */
11885 ret
.attrs
= combine_cacheattr_nibble(s1hi
, s2hi
) << 4
11886 | combine_cacheattr_nibble(s1lo
, s2lo
);
11888 if (ret
.attrs
== 0x44) {
11889 /* Any location for which the resultant memory type is Normal
11890 * Inner Non-cacheable, Outer Non-cacheable is always treated
11891 * as Outer Shareable.
11893 ret
.shareability
= 2;
11897 /* TODO: CombineS1S2Desc does not consider transient, only WB, RWA. */
11898 if (tagged
&& ret
.attrs
== 0xff) {
11906 /* get_phys_addr - get the physical address for this virtual address
11908 * Find the physical address corresponding to the given virtual address,
11909 * by doing a translation table walk on MMU based systems or using the
11910 * MPU state on MPU based systems.
11912 * Returns false if the translation was successful. Otherwise, phys_ptr, attrs,
11913 * prot and page_size may not be filled in, and the populated fsr value provides
11914 * information on why the translation aborted, in the format of a
11915 * DFSR/IFSR fault register, with the following caveats:
11916 * * we honour the short vs long DFSR format differences.
11917 * * the WnR bit is never set (the caller must do this).
11918 * * for PSMAv5 based systems we don't bother to return a full FSR format
11921 * @env: CPUARMState
11922 * @address: virtual address to get physical address for
11923 * @access_type: 0 for read, 1 for write, 2 for execute
11924 * @mmu_idx: MMU index indicating required translation regime
11925 * @phys_ptr: set to the physical address corresponding to the virtual address
11926 * @attrs: set to the memory transaction attributes to use
11927 * @prot: set to the permissions for the page containing phys_ptr
11928 * @page_size: set to the size of the page containing phys_ptr
11929 * @fi: set to fault info if the translation fails
11930 * @cacheattrs: (if non-NULL) set to the cacheability/shareability attributes
11932 bool get_phys_addr(CPUARMState
*env
, target_ulong address
,
11933 MMUAccessType access_type
, ARMMMUIdx mmu_idx
,
11934 hwaddr
*phys_ptr
, MemTxAttrs
*attrs
, int *prot
,
11935 target_ulong
*page_size
,
11936 ARMMMUFaultInfo
*fi
, ARMCacheAttrs
*cacheattrs
)
11938 if (mmu_idx
== ARMMMUIdx_E10_0
||
11939 mmu_idx
== ARMMMUIdx_E10_1
||
11940 mmu_idx
== ARMMMUIdx_E10_1_PAN
) {
11941 /* Call ourselves recursively to do the stage 1 and then stage 2
11944 if (arm_feature(env
, ARM_FEATURE_EL2
)) {
11948 ARMCacheAttrs cacheattrs2
= {};
11950 ret
= get_phys_addr(env
, address
, access_type
,
11951 stage_1_mmu_idx(mmu_idx
), &ipa
, attrs
,
11952 prot
, page_size
, fi
, cacheattrs
);
11954 /* If S1 fails or S2 is disabled, return early. */
11955 if (ret
|| regime_translation_disabled(env
, ARMMMUIdx_Stage2
)) {
11960 /* S1 is done. Now do S2 translation. */
11961 ret
= get_phys_addr_lpae(env
, ipa
, access_type
, ARMMMUIdx_Stage2
,
11962 mmu_idx
== ARMMMUIdx_E10_0
,
11963 phys_ptr
, attrs
, &s2_prot
,
11964 page_size
, fi
, &cacheattrs2
);
11966 /* Combine the S1 and S2 perms. */
11969 /* If S2 fails, return early. */
11974 /* Combine the S1 and S2 cache attributes. */
11975 if (env
->cp15
.hcr_el2
& HCR_DC
) {
11977 * HCR.DC forces the first stage attributes to
11978 * Normal Non-Shareable,
11979 * Inner Write-Back Read-Allocate Write-Allocate,
11980 * Outer Write-Back Read-Allocate Write-Allocate.
11981 * Do not overwrite Tagged within attrs.
11983 if (cacheattrs
->attrs
!= 0xf0) {
11984 cacheattrs
->attrs
= 0xff;
11986 cacheattrs
->shareability
= 0;
11988 *cacheattrs
= combine_cacheattrs(*cacheattrs
, cacheattrs2
);
11992 * For non-EL2 CPUs a stage1+stage2 translation is just stage 1.
11994 mmu_idx
= stage_1_mmu_idx(mmu_idx
);
11998 /* The page table entries may downgrade secure to non-secure, but
11999 * cannot upgrade an non-secure translation regime's attributes
12002 attrs
->secure
= regime_is_secure(env
, mmu_idx
);
12003 attrs
->user
= regime_is_user(env
, mmu_idx
);
12005 /* Fast Context Switch Extension. This doesn't exist at all in v8.
12006 * In v7 and earlier it affects all stage 1 translations.
12008 if (address
< 0x02000000 && mmu_idx
!= ARMMMUIdx_Stage2
12009 && !arm_feature(env
, ARM_FEATURE_V8
)) {
12010 if (regime_el(env
, mmu_idx
) == 3) {
12011 address
+= env
->cp15
.fcseidr_s
;
12013 address
+= env
->cp15
.fcseidr_ns
;
12017 if (arm_feature(env
, ARM_FEATURE_PMSA
)) {
12019 *page_size
= TARGET_PAGE_SIZE
;
12021 if (arm_feature(env
, ARM_FEATURE_V8
)) {
12023 ret
= get_phys_addr_pmsav8(env
, address
, access_type
, mmu_idx
,
12024 phys_ptr
, attrs
, prot
, page_size
, fi
);
12025 } else if (arm_feature(env
, ARM_FEATURE_V7
)) {
12027 ret
= get_phys_addr_pmsav7(env
, address
, access_type
, mmu_idx
,
12028 phys_ptr
, prot
, page_size
, fi
);
12031 ret
= get_phys_addr_pmsav5(env
, address
, access_type
, mmu_idx
,
12032 phys_ptr
, prot
, fi
);
12034 qemu_log_mask(CPU_LOG_MMU
, "PMSA MPU lookup for %s at 0x%08" PRIx32
12035 " mmu_idx %u -> %s (prot %c%c%c)\n",
12036 access_type
== MMU_DATA_LOAD
? "reading" :
12037 (access_type
== MMU_DATA_STORE
? "writing" : "execute"),
12038 (uint32_t)address
, mmu_idx
,
12039 ret
? "Miss" : "Hit",
12040 *prot
& PAGE_READ
? 'r' : '-',
12041 *prot
& PAGE_WRITE
? 'w' : '-',
12042 *prot
& PAGE_EXEC
? 'x' : '-');
12047 /* Definitely a real MMU, not an MPU */
12049 if (regime_translation_disabled(env
, mmu_idx
)) {
12054 * MMU disabled. S1 addresses within aa64 translation regimes are
12055 * still checked for bounds -- see AArch64.TranslateAddressS1Off.
12057 if (mmu_idx
!= ARMMMUIdx_Stage2
) {
12058 int r_el
= regime_el(env
, mmu_idx
);
12059 if (arm_el_is_aa64(env
, r_el
)) {
12060 int pamax
= arm_pamax(env_archcpu(env
));
12061 uint64_t tcr
= env
->cp15
.tcr_el
[r_el
].raw_tcr
;
12064 tbi
= aa64_va_parameter_tbi(tcr
, mmu_idx
);
12065 if (access_type
== MMU_INST_FETCH
) {
12066 tbi
&= ~aa64_va_parameter_tbid(tcr
, mmu_idx
);
12068 tbi
= (tbi
>> extract64(address
, 55, 1)) & 1;
12069 addrtop
= (tbi
? 55 : 63);
12071 if (extract64(address
, pamax
, addrtop
- pamax
+ 1) != 0) {
12072 fi
->type
= ARMFault_AddressSize
;
12074 fi
->stage2
= false;
12079 * When TBI is disabled, we've just validated that all of the
12080 * bits above PAMax are zero, so logically we only need to
12081 * clear the top byte for TBI. But it's clearer to follow
12082 * the pseudocode set of addrdesc.paddress.
12084 address
= extract64(address
, 0, 52);
12087 *phys_ptr
= address
;
12088 *prot
= PAGE_READ
| PAGE_WRITE
| PAGE_EXEC
;
12089 *page_size
= TARGET_PAGE_SIZE
;
12091 /* Fill in cacheattr a-la AArch64.TranslateAddressS1Off. */
12092 hcr
= arm_hcr_el2_eff(env
);
12093 cacheattrs
->shareability
= 0;
12094 if (hcr
& HCR_DC
) {
12095 if (hcr
& HCR_DCT
) {
12096 memattr
= 0xf0; /* Tagged, Normal, WB, RWA */
12098 memattr
= 0xff; /* Normal, WB, RWA */
12100 } else if (access_type
== MMU_INST_FETCH
) {
12101 if (regime_sctlr(env
, mmu_idx
) & SCTLR_I
) {
12102 memattr
= 0xee; /* Normal, WT, RA, NT */
12104 memattr
= 0x44; /* Normal, NC, No */
12106 cacheattrs
->shareability
= 2; /* outer sharable */
12108 memattr
= 0x00; /* Device, nGnRnE */
12110 cacheattrs
->attrs
= memattr
;
12114 if (regime_using_lpae_format(env
, mmu_idx
)) {
12115 return get_phys_addr_lpae(env
, address
, access_type
, mmu_idx
, false,
12116 phys_ptr
, attrs
, prot
, page_size
,
12118 } else if (regime_sctlr(env
, mmu_idx
) & SCTLR_XP
) {
12119 return get_phys_addr_v6(env
, address
, access_type
, mmu_idx
,
12120 phys_ptr
, attrs
, prot
, page_size
, fi
);
12122 return get_phys_addr_v5(env
, address
, access_type
, mmu_idx
,
12123 phys_ptr
, prot
, page_size
, fi
);
12127 hwaddr
arm_cpu_get_phys_page_attrs_debug(CPUState
*cs
, vaddr addr
,
12130 ARMCPU
*cpu
= ARM_CPU(cs
);
12131 CPUARMState
*env
= &cpu
->env
;
12133 target_ulong page_size
;
12136 ARMMMUFaultInfo fi
= {};
12137 ARMMMUIdx mmu_idx
= arm_mmu_idx(env
);
12138 ARMCacheAttrs cacheattrs
= {};
12140 *attrs
= (MemTxAttrs
) {};
12142 ret
= get_phys_addr(env
, addr
, 0, mmu_idx
, &phys_addr
,
12143 attrs
, &prot
, &page_size
, &fi
, &cacheattrs
);
12153 /* Note that signed overflow is undefined in C. The following routines are
12154 careful to use unsigned types where modulo arithmetic is required.
12155 Failure to do so _will_ break on newer gcc. */
12157 /* Signed saturating arithmetic. */
12159 /* Perform 16-bit signed saturating addition. */
12160 static inline uint16_t add16_sat(uint16_t a
, uint16_t b
)
12165 if (((res
^ a
) & 0x8000) && !((a
^ b
) & 0x8000)) {
12174 /* Perform 8-bit signed saturating addition. */
12175 static inline uint8_t add8_sat(uint8_t a
, uint8_t b
)
12180 if (((res
^ a
) & 0x80) && !((a
^ b
) & 0x80)) {
12189 /* Perform 16-bit signed saturating subtraction. */
12190 static inline uint16_t sub16_sat(uint16_t a
, uint16_t b
)
12195 if (((res
^ a
) & 0x8000) && ((a
^ b
) & 0x8000)) {
12204 /* Perform 8-bit signed saturating subtraction. */
12205 static inline uint8_t sub8_sat(uint8_t a
, uint8_t b
)
12210 if (((res
^ a
) & 0x80) && ((a
^ b
) & 0x80)) {
12219 #define ADD16(a, b, n) RESULT(add16_sat(a, b), n, 16);
12220 #define SUB16(a, b, n) RESULT(sub16_sat(a, b), n, 16);
12221 #define ADD8(a, b, n) RESULT(add8_sat(a, b), n, 8);
12222 #define SUB8(a, b, n) RESULT(sub8_sat(a, b), n, 8);
12225 #include "op_addsub.h"
12227 /* Unsigned saturating arithmetic. */
12228 static inline uint16_t add16_usat(uint16_t a
, uint16_t b
)
12237 static inline uint16_t sub16_usat(uint16_t a
, uint16_t b
)
12245 static inline uint8_t add8_usat(uint8_t a
, uint8_t b
)
12254 static inline uint8_t sub8_usat(uint8_t a
, uint8_t b
)
12262 #define ADD16(a, b, n) RESULT(add16_usat(a, b), n, 16);
12263 #define SUB16(a, b, n) RESULT(sub16_usat(a, b), n, 16);
12264 #define ADD8(a, b, n) RESULT(add8_usat(a, b), n, 8);
12265 #define SUB8(a, b, n) RESULT(sub8_usat(a, b), n, 8);
12268 #include "op_addsub.h"
12270 /* Signed modulo arithmetic. */
12271 #define SARITH16(a, b, n, op) do { \
12273 sum = (int32_t)(int16_t)(a) op (int32_t)(int16_t)(b); \
12274 RESULT(sum, n, 16); \
12276 ge |= 3 << (n * 2); \
12279 #define SARITH8(a, b, n, op) do { \
12281 sum = (int32_t)(int8_t)(a) op (int32_t)(int8_t)(b); \
12282 RESULT(sum, n, 8); \
12288 #define ADD16(a, b, n) SARITH16(a, b, n, +)
12289 #define SUB16(a, b, n) SARITH16(a, b, n, -)
12290 #define ADD8(a, b, n) SARITH8(a, b, n, +)
12291 #define SUB8(a, b, n) SARITH8(a, b, n, -)
12295 #include "op_addsub.h"
12297 /* Unsigned modulo arithmetic. */
12298 #define ADD16(a, b, n) do { \
12300 sum = (uint32_t)(uint16_t)(a) + (uint32_t)(uint16_t)(b); \
12301 RESULT(sum, n, 16); \
12302 if ((sum >> 16) == 1) \
12303 ge |= 3 << (n * 2); \
12306 #define ADD8(a, b, n) do { \
12308 sum = (uint32_t)(uint8_t)(a) + (uint32_t)(uint8_t)(b); \
12309 RESULT(sum, n, 8); \
12310 if ((sum >> 8) == 1) \
12314 #define SUB16(a, b, n) do { \
12316 sum = (uint32_t)(uint16_t)(a) - (uint32_t)(uint16_t)(b); \
12317 RESULT(sum, n, 16); \
12318 if ((sum >> 16) == 0) \
12319 ge |= 3 << (n * 2); \
12322 #define SUB8(a, b, n) do { \
12324 sum = (uint32_t)(uint8_t)(a) - (uint32_t)(uint8_t)(b); \
12325 RESULT(sum, n, 8); \
12326 if ((sum >> 8) == 0) \
12333 #include "op_addsub.h"
12335 /* Halved signed arithmetic. */
12336 #define ADD16(a, b, n) \
12337 RESULT(((int32_t)(int16_t)(a) + (int32_t)(int16_t)(b)) >> 1, n, 16)
12338 #define SUB16(a, b, n) \
12339 RESULT(((int32_t)(int16_t)(a) - (int32_t)(int16_t)(b)) >> 1, n, 16)
12340 #define ADD8(a, b, n) \
12341 RESULT(((int32_t)(int8_t)(a) + (int32_t)(int8_t)(b)) >> 1, n, 8)
12342 #define SUB8(a, b, n) \
12343 RESULT(((int32_t)(int8_t)(a) - (int32_t)(int8_t)(b)) >> 1, n, 8)
12346 #include "op_addsub.h"
12348 /* Halved unsigned arithmetic. */
12349 #define ADD16(a, b, n) \
12350 RESULT(((uint32_t)(uint16_t)(a) + (uint32_t)(uint16_t)(b)) >> 1, n, 16)
12351 #define SUB16(a, b, n) \
12352 RESULT(((uint32_t)(uint16_t)(a) - (uint32_t)(uint16_t)(b)) >> 1, n, 16)
12353 #define ADD8(a, b, n) \
12354 RESULT(((uint32_t)(uint8_t)(a) + (uint32_t)(uint8_t)(b)) >> 1, n, 8)
12355 #define SUB8(a, b, n) \
12356 RESULT(((uint32_t)(uint8_t)(a) - (uint32_t)(uint8_t)(b)) >> 1, n, 8)
12359 #include "op_addsub.h"
12361 static inline uint8_t do_usad(uint8_t a
, uint8_t b
)
12369 /* Unsigned sum of absolute byte differences. */
12370 uint32_t HELPER(usad8
)(uint32_t a
, uint32_t b
)
12373 sum
= do_usad(a
, b
);
12374 sum
+= do_usad(a
>> 8, b
>> 8);
12375 sum
+= do_usad(a
>> 16, b
>>16);
12376 sum
+= do_usad(a
>> 24, b
>> 24);
12380 /* For ARMv6 SEL instruction. */
12381 uint32_t HELPER(sel_flags
)(uint32_t flags
, uint32_t a
, uint32_t b
)
12393 mask
|= 0xff000000;
12394 return (a
& mask
) | (b
& ~mask
);
12398 * The upper bytes of val (above the number specified by 'bytes') must have
12399 * been zeroed out by the caller.
12401 uint32_t HELPER(crc32
)(uint32_t acc
, uint32_t val
, uint32_t bytes
)
12405 stl_le_p(buf
, val
);
12407 /* zlib crc32 converts the accumulator and output to one's complement. */
12408 return crc32(acc
^ 0xffffffff, buf
, bytes
) ^ 0xffffffff;
12411 uint32_t HELPER(crc32c
)(uint32_t acc
, uint32_t val
, uint32_t bytes
)
12415 stl_le_p(buf
, val
);
12417 /* Linux crc32c converts the output to one's complement. */
12418 return crc32c(acc
, buf
, bytes
) ^ 0xffffffff;
12421 /* Return the exception level to which FP-disabled exceptions should
12422 * be taken, or 0 if FP is enabled.
12424 int fp_exception_el(CPUARMState
*env
, int cur_el
)
12426 #ifndef CONFIG_USER_ONLY
12427 /* CPACR and the CPTR registers don't exist before v6, so FP is
12428 * always accessible
12430 if (!arm_feature(env
, ARM_FEATURE_V6
)) {
12434 if (arm_feature(env
, ARM_FEATURE_M
)) {
12435 /* CPACR can cause a NOCP UsageFault taken to current security state */
12436 if (!v7m_cpacr_pass(env
, env
->v7m
.secure
, cur_el
!= 0)) {
12440 if (arm_feature(env
, ARM_FEATURE_M_SECURITY
) && !env
->v7m
.secure
) {
12441 if (!extract32(env
->v7m
.nsacr
, 10, 1)) {
12442 /* FP insns cause a NOCP UsageFault taken to Secure */
12450 /* The CPACR controls traps to EL1, or PL1 if we're 32 bit:
12451 * 0, 2 : trap EL0 and EL1/PL1 accesses
12452 * 1 : trap only EL0 accesses
12453 * 3 : trap no accesses
12454 * This register is ignored if E2H+TGE are both set.
12456 if ((arm_hcr_el2_eff(env
) & (HCR_E2H
| HCR_TGE
)) != (HCR_E2H
| HCR_TGE
)) {
12457 int fpen
= extract32(env
->cp15
.cpacr_el1
, 20, 2);
12462 if (cur_el
== 0 || cur_el
== 1) {
12463 /* Trap to PL1, which might be EL1 or EL3 */
12464 if (arm_is_secure(env
) && !arm_el_is_aa64(env
, 3)) {
12469 if (cur_el
== 3 && !is_a64(env
)) {
12470 /* Secure PL1 running at EL3 */
12485 * The NSACR allows A-profile AArch32 EL3 and M-profile secure mode
12486 * to control non-secure access to the FPU. It doesn't have any
12487 * effect if EL3 is AArch64 or if EL3 doesn't exist at all.
12489 if ((arm_feature(env
, ARM_FEATURE_EL3
) && !arm_el_is_aa64(env
, 3) &&
12490 cur_el
<= 2 && !arm_is_secure_below_el3(env
))) {
12491 if (!extract32(env
->cp15
.nsacr
, 10, 1)) {
12492 /* FP insns act as UNDEF */
12493 return cur_el
== 2 ? 2 : 1;
12497 /* For the CPTR registers we don't need to guard with an ARM_FEATURE
12498 * check because zero bits in the registers mean "don't trap".
12501 /* CPTR_EL2 : present in v7VE or v8 */
12502 if (cur_el
<= 2 && extract32(env
->cp15
.cptr_el
[2], 10, 1)
12503 && !arm_is_secure_below_el3(env
)) {
12504 /* Trap FP ops at EL2, NS-EL1 or NS-EL0 to EL2 */
12508 /* CPTR_EL3 : present in v8 */
12509 if (extract32(env
->cp15
.cptr_el
[3], 10, 1)) {
12510 /* Trap all FP ops to EL3 */
12517 /* Return the exception level we're running at if this is our mmu_idx */
12518 int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx
)
12520 if (mmu_idx
& ARM_MMU_IDX_M
) {
12521 return mmu_idx
& ARM_MMU_IDX_M_PRIV
;
12525 case ARMMMUIdx_E10_0
:
12526 case ARMMMUIdx_E20_0
:
12527 case ARMMMUIdx_SE10_0
:
12529 case ARMMMUIdx_E10_1
:
12530 case ARMMMUIdx_E10_1_PAN
:
12531 case ARMMMUIdx_SE10_1
:
12532 case ARMMMUIdx_SE10_1_PAN
:
12535 case ARMMMUIdx_E20_2
:
12536 case ARMMMUIdx_E20_2_PAN
:
12538 case ARMMMUIdx_SE3
:
12541 g_assert_not_reached();
12546 ARMMMUIdx
arm_v7m_mmu_idx_for_secstate(CPUARMState
*env
, bool secstate
)
12548 g_assert_not_reached();
12552 ARMMMUIdx
arm_mmu_idx_el(CPUARMState
*env
, int el
)
12554 if (arm_feature(env
, ARM_FEATURE_M
)) {
12555 return arm_v7m_mmu_idx_for_secstate(env
, env
->v7m
.secure
);
12558 /* See ARM pseudo-function ELIsInHost. */
12561 if (arm_is_secure_below_el3(env
)) {
12562 return ARMMMUIdx_SE10_0
;
12564 if ((env
->cp15
.hcr_el2
& (HCR_E2H
| HCR_TGE
)) == (HCR_E2H
| HCR_TGE
)
12565 && arm_el_is_aa64(env
, 2)) {
12566 return ARMMMUIdx_E20_0
;
12568 return ARMMMUIdx_E10_0
;
12570 if (arm_is_secure_below_el3(env
)) {
12571 if (env
->pstate
& PSTATE_PAN
) {
12572 return ARMMMUIdx_SE10_1_PAN
;
12574 return ARMMMUIdx_SE10_1
;
12576 if (env
->pstate
& PSTATE_PAN
) {
12577 return ARMMMUIdx_E10_1_PAN
;
12579 return ARMMMUIdx_E10_1
;
12581 /* TODO: ARMv8.4-SecEL2 */
12582 /* Note that TGE does not apply at EL2. */
12583 if ((env
->cp15
.hcr_el2
& HCR_E2H
) && arm_el_is_aa64(env
, 2)) {
12584 if (env
->pstate
& PSTATE_PAN
) {
12585 return ARMMMUIdx_E20_2_PAN
;
12587 return ARMMMUIdx_E20_2
;
12589 return ARMMMUIdx_E2
;
12591 return ARMMMUIdx_SE3
;
12593 g_assert_not_reached();
12597 ARMMMUIdx
arm_mmu_idx(CPUARMState
*env
)
12599 return arm_mmu_idx_el(env
, arm_current_el(env
));
12602 #ifndef CONFIG_USER_ONLY
12603 ARMMMUIdx
arm_stage1_mmu_idx(CPUARMState
*env
)
12605 return stage_1_mmu_idx(arm_mmu_idx(env
));
12609 static uint32_t rebuild_hflags_common(CPUARMState
*env
, int fp_el
,
12610 ARMMMUIdx mmu_idx
, uint32_t flags
)
12612 flags
= FIELD_DP32(flags
, TBFLAG_ANY
, FPEXC_EL
, fp_el
);
12613 flags
= FIELD_DP32(flags
, TBFLAG_ANY
, MMUIDX
,
12614 arm_to_core_mmu_idx(mmu_idx
));
12616 if (arm_singlestep_active(env
)) {
12617 flags
= FIELD_DP32(flags
, TBFLAG_ANY
, SS_ACTIVE
, 1);
12622 static uint32_t rebuild_hflags_common_32(CPUARMState
*env
, int fp_el
,
12623 ARMMMUIdx mmu_idx
, uint32_t flags
)
12625 bool sctlr_b
= arm_sctlr_b(env
);
12628 flags
= FIELD_DP32(flags
, TBFLAG_A32
, SCTLR_B
, 1);
12630 if (arm_cpu_data_is_big_endian_a32(env
, sctlr_b
)) {
12631 flags
= FIELD_DP32(flags
, TBFLAG_ANY
, BE_DATA
, 1);
12633 flags
= FIELD_DP32(flags
, TBFLAG_A32
, NS
, !access_secure_reg(env
));
12635 return rebuild_hflags_common(env
, fp_el
, mmu_idx
, flags
);
12638 static uint32_t rebuild_hflags_m32(CPUARMState
*env
, int fp_el
,
12641 uint32_t flags
= 0;
12643 if (arm_v7m_is_handler_mode(env
)) {
12644 flags
= FIELD_DP32(flags
, TBFLAG_M32
, HANDLER
, 1);
12648 * v8M always applies stack limit checks unless CCR.STKOFHFNMIGN
12649 * is suppressing them because the requested execution priority
12652 if (arm_feature(env
, ARM_FEATURE_V8
) &&
12653 !((mmu_idx
& ARM_MMU_IDX_M_NEGPRI
) &&
12654 (env
->v7m
.ccr
[env
->v7m
.secure
] & R_V7M_CCR_STKOFHFNMIGN_MASK
))) {
12655 flags
= FIELD_DP32(flags
, TBFLAG_M32
, STACKCHECK
, 1);
12658 return rebuild_hflags_common_32(env
, fp_el
, mmu_idx
, flags
);
12661 static uint32_t rebuild_hflags_aprofile(CPUARMState
*env
)
12665 flags
= FIELD_DP32(flags
, TBFLAG_ANY
, DEBUG_TARGET_EL
,
12666 arm_debug_target_el(env
));
12670 static uint32_t rebuild_hflags_a32(CPUARMState
*env
, int fp_el
,
12673 uint32_t flags
= rebuild_hflags_aprofile(env
);
12675 if (arm_el_is_aa64(env
, 1)) {
12676 flags
= FIELD_DP32(flags
, TBFLAG_A32
, VFPEN
, 1);
12679 if (arm_current_el(env
) < 2 && env
->cp15
.hstr_el2
&&
12680 (arm_hcr_el2_eff(env
) & (HCR_E2H
| HCR_TGE
)) != (HCR_E2H
| HCR_TGE
)) {
12681 flags
= FIELD_DP32(flags
, TBFLAG_A32
, HSTR_ACTIVE
, 1);
12684 return rebuild_hflags_common_32(env
, fp_el
, mmu_idx
, flags
);
12687 static uint32_t rebuild_hflags_a64(CPUARMState
*env
, int el
, int fp_el
,
12690 uint32_t flags
= rebuild_hflags_aprofile(env
);
12691 ARMMMUIdx stage1
= stage_1_mmu_idx(mmu_idx
);
12692 uint64_t tcr
= regime_tcr(env
, mmu_idx
)->raw_tcr
;
12696 flags
= FIELD_DP32(flags
, TBFLAG_ANY
, AARCH64_STATE
, 1);
12698 /* Get control bits for tagged addresses. */
12699 tbid
= aa64_va_parameter_tbi(tcr
, mmu_idx
);
12700 tbii
= tbid
& ~aa64_va_parameter_tbid(tcr
, mmu_idx
);
12702 flags
= FIELD_DP32(flags
, TBFLAG_A64
, TBII
, tbii
);
12703 flags
= FIELD_DP32(flags
, TBFLAG_A64
, TBID
, tbid
);
12705 if (cpu_isar_feature(aa64_sve
, env_archcpu(env
))) {
12706 int sve_el
= sve_exception_el(env
, el
);
12710 * If SVE is disabled, but FP is enabled,
12711 * then the effective len is 0.
12713 if (sve_el
!= 0 && fp_el
== 0) {
12716 zcr_len
= sve_zcr_len_for_el(env
, el
);
12718 flags
= FIELD_DP32(flags
, TBFLAG_A64
, SVEEXC_EL
, sve_el
);
12719 flags
= FIELD_DP32(flags
, TBFLAG_A64
, ZCR_LEN
, zcr_len
);
12722 sctlr
= regime_sctlr(env
, stage1
);
12724 if (arm_cpu_data_is_big_endian_a64(el
, sctlr
)) {
12725 flags
= FIELD_DP32(flags
, TBFLAG_ANY
, BE_DATA
, 1);
12728 if (cpu_isar_feature(aa64_pauth
, env_archcpu(env
))) {
12730 * In order to save space in flags, we record only whether
12731 * pauth is "inactive", meaning all insns are implemented as
12732 * a nop, or "active" when some action must be performed.
12733 * The decision of which action to take is left to a helper.
12735 if (sctlr
& (SCTLR_EnIA
| SCTLR_EnIB
| SCTLR_EnDA
| SCTLR_EnDB
)) {
12736 flags
= FIELD_DP32(flags
, TBFLAG_A64
, PAUTH_ACTIVE
, 1);
12740 if (cpu_isar_feature(aa64_bti
, env_archcpu(env
))) {
12741 /* Note that SCTLR_EL[23].BT == SCTLR_BT1. */
12742 if (sctlr
& (el
== 0 ? SCTLR_BT0
: SCTLR_BT1
)) {
12743 flags
= FIELD_DP32(flags
, TBFLAG_A64
, BT
, 1);
12747 /* Compute the condition for using AccType_UNPRIV for LDTR et al. */
12748 if (!(env
->pstate
& PSTATE_UAO
)) {
12750 case ARMMMUIdx_E10_1
:
12751 case ARMMMUIdx_E10_1_PAN
:
12752 case ARMMMUIdx_SE10_1
:
12753 case ARMMMUIdx_SE10_1_PAN
:
12754 /* TODO: ARMv8.3-NV */
12755 flags
= FIELD_DP32(flags
, TBFLAG_A64
, UNPRIV
, 1);
12757 case ARMMMUIdx_E20_2
:
12758 case ARMMMUIdx_E20_2_PAN
:
12759 /* TODO: ARMv8.4-SecEL2 */
12761 * Note that EL20_2 is gated by HCR_EL2.E2H == 1, but EL20_0 is
12762 * gated by HCR_EL2.<E2H,TGE> == '11', and so is LDTR.
12764 if (env
->cp15
.hcr_el2
& HCR_TGE
) {
12765 flags
= FIELD_DP32(flags
, TBFLAG_A64
, UNPRIV
, 1);
12773 if (cpu_isar_feature(aa64_mte
, env_archcpu(env
))) {
12775 * Set MTE_ACTIVE if any access may be Checked, and leave clear
12776 * if all accesses must be Unchecked:
12777 * 1) If no TBI, then there are no tags in the address to check,
12778 * 2) If Tag Check Override, then all accesses are Unchecked,
12779 * 3) If Tag Check Fail == 0, then Checked access have no effect,
12780 * 4) If no Allocation Tag Access, then all accesses are Unchecked.
12782 if (allocation_tag_access_enabled(env
, el
, sctlr
)) {
12783 flags
= FIELD_DP32(flags
, TBFLAG_A64
, ATA
, 1);
12785 && !(env
->pstate
& PSTATE_TCO
)
12786 && (sctlr
& (el
== 0 ? SCTLR_TCF0
: SCTLR_TCF
))) {
12787 flags
= FIELD_DP32(flags
, TBFLAG_A64
, MTE_ACTIVE
, 1);
12790 /* And again for unprivileged accesses, if required. */
12791 if (FIELD_EX32(flags
, TBFLAG_A64
, UNPRIV
)
12793 && !(env
->pstate
& PSTATE_TCO
)
12794 && (sctlr
& SCTLR_TCF0
)
12795 && allocation_tag_access_enabled(env
, 0, sctlr
)) {
12796 flags
= FIELD_DP32(flags
, TBFLAG_A64
, MTE0_ACTIVE
, 1);
12798 /* Cache TCMA as well as TBI. */
12799 flags
= FIELD_DP32(flags
, TBFLAG_A64
, TCMA
,
12800 aa64_va_parameter_tcma(tcr
, mmu_idx
));
12803 return rebuild_hflags_common(env
, fp_el
, mmu_idx
, flags
);
12806 static uint32_t rebuild_hflags_internal(CPUARMState
*env
)
12808 int el
= arm_current_el(env
);
12809 int fp_el
= fp_exception_el(env
, el
);
12810 ARMMMUIdx mmu_idx
= arm_mmu_idx_el(env
, el
);
12813 return rebuild_hflags_a64(env
, el
, fp_el
, mmu_idx
);
12814 } else if (arm_feature(env
, ARM_FEATURE_M
)) {
12815 return rebuild_hflags_m32(env
, fp_el
, mmu_idx
);
12817 return rebuild_hflags_a32(env
, fp_el
, mmu_idx
);
12821 void arm_rebuild_hflags(CPUARMState
*env
)
12823 env
->hflags
= rebuild_hflags_internal(env
);
12827 * If we have triggered a EL state change we can't rely on the
12828 * translator having passed it to us, we need to recompute.
12830 void HELPER(rebuild_hflags_m32_newel
)(CPUARMState
*env
)
12832 int el
= arm_current_el(env
);
12833 int fp_el
= fp_exception_el(env
, el
);
12834 ARMMMUIdx mmu_idx
= arm_mmu_idx_el(env
, el
);
12835 env
->hflags
= rebuild_hflags_m32(env
, fp_el
, mmu_idx
);
12838 void HELPER(rebuild_hflags_m32
)(CPUARMState
*env
, int el
)
12840 int fp_el
= fp_exception_el(env
, el
);
12841 ARMMMUIdx mmu_idx
= arm_mmu_idx_el(env
, el
);
12843 env
->hflags
= rebuild_hflags_m32(env
, fp_el
, mmu_idx
);
12847 * If we have triggered a EL state change we can't rely on the
12848 * translator having passed it to us, we need to recompute.
12850 void HELPER(rebuild_hflags_a32_newel
)(CPUARMState
*env
)
12852 int el
= arm_current_el(env
);
12853 int fp_el
= fp_exception_el(env
, el
);
12854 ARMMMUIdx mmu_idx
= arm_mmu_idx_el(env
, el
);
12855 env
->hflags
= rebuild_hflags_a32(env
, fp_el
, mmu_idx
);
12858 void HELPER(rebuild_hflags_a32
)(CPUARMState
*env
, int el
)
12860 int fp_el
= fp_exception_el(env
, el
);
12861 ARMMMUIdx mmu_idx
= arm_mmu_idx_el(env
, el
);
12863 env
->hflags
= rebuild_hflags_a32(env
, fp_el
, mmu_idx
);
12866 void HELPER(rebuild_hflags_a64
)(CPUARMState
*env
, int el
)
12868 int fp_el
= fp_exception_el(env
, el
);
12869 ARMMMUIdx mmu_idx
= arm_mmu_idx_el(env
, el
);
12871 env
->hflags
= rebuild_hflags_a64(env
, el
, fp_el
, mmu_idx
);
12874 static inline void assert_hflags_rebuild_correctly(CPUARMState
*env
)
12876 #ifdef CONFIG_DEBUG_TCG
12877 uint32_t env_flags_current
= env
->hflags
;
12878 uint32_t env_flags_rebuilt
= rebuild_hflags_internal(env
);
12880 if (unlikely(env_flags_current
!= env_flags_rebuilt
)) {
12881 fprintf(stderr
, "TCG hflags mismatch (current:0x%08x rebuilt:0x%08x)\n",
12882 env_flags_current
, env_flags_rebuilt
);
12888 void cpu_get_tb_cpu_state(CPUARMState
*env
, target_ulong
*pc
,
12889 target_ulong
*cs_base
, uint32_t *pflags
)
12891 uint32_t flags
= env
->hflags
;
12892 uint32_t pstate_for_ss
;
12895 assert_hflags_rebuild_correctly(env
);
12897 if (FIELD_EX32(flags
, TBFLAG_ANY
, AARCH64_STATE
)) {
12899 if (cpu_isar_feature(aa64_bti
, env_archcpu(env
))) {
12900 flags
= FIELD_DP32(flags
, TBFLAG_A64
, BTYPE
, env
->btype
);
12902 pstate_for_ss
= env
->pstate
;
12904 *pc
= env
->regs
[15];
12906 if (arm_feature(env
, ARM_FEATURE_M
)) {
12907 if (arm_feature(env
, ARM_FEATURE_M_SECURITY
) &&
12908 FIELD_EX32(env
->v7m
.fpccr
[M_REG_S
], V7M_FPCCR
, S
)
12909 != env
->v7m
.secure
) {
12910 flags
= FIELD_DP32(flags
, TBFLAG_M32
, FPCCR_S_WRONG
, 1);
12913 if ((env
->v7m
.fpccr
[env
->v7m
.secure
] & R_V7M_FPCCR_ASPEN_MASK
) &&
12914 (!(env
->v7m
.control
[M_REG_S
] & R_V7M_CONTROL_FPCA_MASK
) ||
12915 (env
->v7m
.secure
&&
12916 !(env
->v7m
.control
[M_REG_S
] & R_V7M_CONTROL_SFPA_MASK
)))) {
12918 * ASPEN is set, but FPCA/SFPA indicate that there is no
12919 * active FP context; we must create a new FP context before
12920 * executing any FP insn.
12922 flags
= FIELD_DP32(flags
, TBFLAG_M32
, NEW_FP_CTXT_NEEDED
, 1);
12925 bool is_secure
= env
->v7m
.fpccr
[M_REG_S
] & R_V7M_FPCCR_S_MASK
;
12926 if (env
->v7m
.fpccr
[is_secure
] & R_V7M_FPCCR_LSPACT_MASK
) {
12927 flags
= FIELD_DP32(flags
, TBFLAG_M32
, LSPACT
, 1);
12931 * Note that XSCALE_CPAR shares bits with VECSTRIDE.
12932 * Note that VECLEN+VECSTRIDE are RES0 for M-profile.
12934 if (arm_feature(env
, ARM_FEATURE_XSCALE
)) {
12935 flags
= FIELD_DP32(flags
, TBFLAG_A32
,
12936 XSCALE_CPAR
, env
->cp15
.c15_cpar
);
12938 flags
= FIELD_DP32(flags
, TBFLAG_A32
, VECLEN
,
12940 flags
= FIELD_DP32(flags
, TBFLAG_A32
, VECSTRIDE
,
12941 env
->vfp
.vec_stride
);
12943 if (env
->vfp
.xregs
[ARM_VFP_FPEXC
] & (1 << 30)) {
12944 flags
= FIELD_DP32(flags
, TBFLAG_A32
, VFPEN
, 1);
12948 flags
= FIELD_DP32(flags
, TBFLAG_AM32
, THUMB
, env
->thumb
);
12949 flags
= FIELD_DP32(flags
, TBFLAG_AM32
, CONDEXEC
, env
->condexec_bits
);
12950 pstate_for_ss
= env
->uncached_cpsr
;
12954 * The SS_ACTIVE and PSTATE_SS bits correspond to the state machine
12955 * states defined in the ARM ARM for software singlestep:
12956 * SS_ACTIVE PSTATE.SS State
12957 * 0 x Inactive (the TB flag for SS is always 0)
12958 * 1 0 Active-pending
12959 * 1 1 Active-not-pending
12960 * SS_ACTIVE is set in hflags; PSTATE_SS is computed every TB.
12962 if (FIELD_EX32(flags
, TBFLAG_ANY
, SS_ACTIVE
) &&
12963 (pstate_for_ss
& PSTATE_SS
)) {
12964 flags
= FIELD_DP32(flags
, TBFLAG_ANY
, PSTATE_SS
, 1);
12970 #ifdef TARGET_AARCH64
12972 * The manual says that when SVE is enabled and VQ is widened the
12973 * implementation is allowed to zero the previously inaccessible
12974 * portion of the registers. The corollary to that is that when
12975 * SVE is enabled and VQ is narrowed we are also allowed to zero
12976 * the now inaccessible portion of the registers.
12978 * The intent of this is that no predicate bit beyond VQ is ever set.
12979 * Which means that some operations on predicate registers themselves
12980 * may operate on full uint64_t or even unrolled across the maximum
12981 * uint64_t[4]. Performing 4 bits of host arithmetic unconditionally
12982 * may well be cheaper than conditionals to restrict the operation
12983 * to the relevant portion of a uint16_t[16].
12985 void aarch64_sve_narrow_vq(CPUARMState
*env
, unsigned vq
)
12990 assert(vq
>= 1 && vq
<= ARM_MAX_VQ
);
12991 assert(vq
<= env_archcpu(env
)->sve_max_vq
);
12993 /* Zap the high bits of the zregs. */
12994 for (i
= 0; i
< 32; i
++) {
12995 memset(&env
->vfp
.zregs
[i
].d
[2 * vq
], 0, 16 * (ARM_MAX_VQ
- vq
));
12998 /* Zap the high bits of the pregs and ffr. */
13001 pmask
= ~(-1ULL << (16 * (vq
& 3)));
13003 for (j
= vq
/ 4; j
< ARM_MAX_VQ
/ 4; j
++) {
13004 for (i
= 0; i
< 17; ++i
) {
13005 env
->vfp
.pregs
[i
].p
[j
] &= pmask
;
13012 * Notice a change in SVE vector size when changing EL.
13014 void aarch64_sve_change_el(CPUARMState
*env
, int old_el
,
13015 int new_el
, bool el0_a64
)
13017 ARMCPU
*cpu
= env_archcpu(env
);
13018 int old_len
, new_len
;
13019 bool old_a64
, new_a64
;
13021 /* Nothing to do if no SVE. */
13022 if (!cpu_isar_feature(aa64_sve
, cpu
)) {
13026 /* Nothing to do if FP is disabled in either EL. */
13027 if (fp_exception_el(env
, old_el
) || fp_exception_el(env
, new_el
)) {
13032 * DDI0584A.d sec 3.2: "If SVE instructions are disabled or trapped
13033 * at ELx, or not available because the EL is in AArch32 state, then
13034 * for all purposes other than a direct read, the ZCR_ELx.LEN field
13035 * has an effective value of 0".
13037 * Consider EL2 (aa64, vq=4) -> EL0 (aa32) -> EL1 (aa64, vq=0).
13038 * If we ignore aa32 state, we would fail to see the vq4->vq0 transition
13039 * from EL2->EL1. Thus we go ahead and narrow when entering aa32 so that
13040 * we already have the correct register contents when encountering the
13041 * vq0->vq0 transition between EL0->EL1.
13043 old_a64
= old_el
? arm_el_is_aa64(env
, old_el
) : el0_a64
;
13044 old_len
= (old_a64
&& !sve_exception_el(env
, old_el
)
13045 ? sve_zcr_len_for_el(env
, old_el
) : 0);
13046 new_a64
= new_el
? arm_el_is_aa64(env
, new_el
) : el0_a64
;
13047 new_len
= (new_a64
&& !sve_exception_el(env
, new_el
)
13048 ? sve_zcr_len_for_el(env
, new_el
) : 0);
13050 /* When changing vector length, clear inaccessible state. */
13051 if (new_len
< old_len
) {
13052 aarch64_sve_narrow_vq(env
, new_len
+ 1);