2 * Header file for the Xilinx Zynq SPI controller
4 * Copyright (C) 2015 Xilinx Inc
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
25 #ifndef XILINX_SPIPS_H
26 #define XILINX_SPIPS_H
28 #include "hw/ssi/ssi.h"
29 #include "qemu/fifo32.h"
30 #include "hw/stream.h"
31 #include "hw/sysbus.h"
33 typedef struct XilinxSPIPS XilinxSPIPS
;
35 #define XLNX_SPIPS_R_MAX (0x100 / 4)
36 #define XLNX_ZYNQMP_SPIPS_R_MAX (0x830 / 4)
38 /* Bite off 4k chunks at a time */
39 #define LQSPI_CACHE_SIZE 1024
41 #define QSPI_DMA_MAX_BURST_SIZE 2048
44 READ
= 0x3, READ_4
= 0x13,
45 FAST_READ
= 0xb, FAST_READ_4
= 0x0c,
46 DOR
= 0x3b, DOR_4
= 0x3c,
47 QOR
= 0x6b, QOR_4
= 0x6c,
48 DIOR
= 0xbb, DIOR_4
= 0xbc,
49 QIOR
= 0xeb, QIOR_4
= 0xec,
51 PP
= 0x2, PP_4
= 0x12,
53 QPP
= 0x32, QPP_4
= 0x34,
57 SysBusDevice parent_obj
;
71 uint8_t link_state_next
;
72 uint8_t link_state_next_when
;
80 uint8_t num_txrx_bytes
;
83 uint32_t regs
[XLNX_SPIPS_R_MAX
];
89 XilinxSPIPS parent_obj
;
91 uint8_t lqspi_buf
[LQSPI_CACHE_SIZE
];
92 hwaddr lqspi_cached_addr
;
93 Error
*migration_blocker
;
94 bool mmio_execution_enabled
;
98 XilinxQSPIPS parent_obj
;
103 uint32_t regs
[XLNX_ZYNQMP_SPIPS_R_MAX
];
105 /* GQSPI has seperate tx/rx fifos */
110 * At the end of each generic command, misaligned extra bytes are discard
111 * or padded to tx and rx respectively to round it out (and avoid need for
112 * individual byte access. Since we use byte fifos, keep track of the
113 * alignment WRT to word access.
115 uint8_t rx_fifo_g_align
;
116 uint8_t tx_fifo_g_align
;
117 bool man_start_com_g
;
118 uint32_t dma_burst_size
;
119 uint8_t dma_buf
[QSPI_DMA_MAX_BURST_SIZE
];
122 typedef struct XilinxSPIPSClass
{
123 SysBusDeviceClass parent_class
;
125 const MemoryRegionOps
*reg_ops
;
127 uint32_t rx_fifo_size
;
128 uint32_t tx_fifo_size
;
131 #define TYPE_XILINX_SPIPS "xlnx.ps7-spi"
132 #define TYPE_XILINX_QSPIPS "xlnx.ps7-qspi"
133 #define TYPE_XLNX_ZYNQMP_QSPIPS "xlnx.usmp-gqspi"
135 #define XILINX_SPIPS(obj) \
136 OBJECT_CHECK(XilinxSPIPS, (obj), TYPE_XILINX_SPIPS)
137 #define XILINX_SPIPS_CLASS(klass) \
138 OBJECT_CLASS_CHECK(XilinxSPIPSClass, (klass), TYPE_XILINX_SPIPS)
139 #define XILINX_SPIPS_GET_CLASS(obj) \
140 OBJECT_GET_CLASS(XilinxSPIPSClass, (obj), TYPE_XILINX_SPIPS)
142 #define XILINX_QSPIPS(obj) \
143 OBJECT_CHECK(XilinxQSPIPS, (obj), TYPE_XILINX_QSPIPS)
145 #define XLNX_ZYNQMP_QSPIPS(obj) \
146 OBJECT_CHECK(XlnxZynqMPQSPIPS, (obj), TYPE_XLNX_ZYNQMP_QSPIPS)
148 #endif /* XILINX_SPIPS_H */