2 * Adaptec AAC series RAID controller driver
3 * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
5 * based on the old aacraid driver that is..
6 * Adaptec aacraid device driver for Linux.
8 * Copyright (c) 2000-2007 Adaptec, Inc. (aacraid@adaptec.com)
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2, or (at your option)
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; see the file COPYING. If not, write to
22 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
26 #include <linux/kernel.h>
27 #include <linux/init.h>
28 #include <linux/types.h>
29 #include <linux/pci.h>
30 #include <linux/spinlock.h>
31 #include <linux/slab.h>
32 #include <linux/completion.h>
33 #include <linux/blkdev.h>
34 #include <asm/semaphore.h>
35 #include <asm/uaccess.h>
36 #include <linux/highmem.h> /* For flush_kernel_dcache_page */
38 #include <scsi/scsi.h>
39 #include <scsi/scsi_cmnd.h>
40 #include <scsi/scsi_device.h>
41 #include <scsi/scsi_host.h>
45 /* values for inqd_pdt: Peripheral device type in plain English */
46 #define INQD_PDT_DA 0x00 /* Direct-access (DISK) device */
47 #define INQD_PDT_PROC 0x03 /* Processor device */
48 #define INQD_PDT_CHNGR 0x08 /* Changer (jukebox, scsi2) */
49 #define INQD_PDT_COMM 0x09 /* Communication device (scsi2) */
50 #define INQD_PDT_NOLUN2 0x1f /* Unknown Device (scsi2) */
51 #define INQD_PDT_NOLUN 0x7f /* Logical Unit Not Present */
53 #define INQD_PDT_DMASK 0x1F /* Peripheral Device Type Mask */
54 #define INQD_PDT_QMASK 0xE0 /* Peripheral Device Qualifer Mask */
60 #define SENCODE_NO_SENSE 0x00
61 #define SENCODE_END_OF_DATA 0x00
62 #define SENCODE_BECOMING_READY 0x04
63 #define SENCODE_INIT_CMD_REQUIRED 0x04
64 #define SENCODE_PARAM_LIST_LENGTH_ERROR 0x1A
65 #define SENCODE_INVALID_COMMAND 0x20
66 #define SENCODE_LBA_OUT_OF_RANGE 0x21
67 #define SENCODE_INVALID_CDB_FIELD 0x24
68 #define SENCODE_LUN_NOT_SUPPORTED 0x25
69 #define SENCODE_INVALID_PARAM_FIELD 0x26
70 #define SENCODE_PARAM_NOT_SUPPORTED 0x26
71 #define SENCODE_PARAM_VALUE_INVALID 0x26
72 #define SENCODE_RESET_OCCURRED 0x29
73 #define SENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x3E
74 #define SENCODE_INQUIRY_DATA_CHANGED 0x3F
75 #define SENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x39
76 #define SENCODE_DIAGNOSTIC_FAILURE 0x40
77 #define SENCODE_INTERNAL_TARGET_FAILURE 0x44
78 #define SENCODE_INVALID_MESSAGE_ERROR 0x49
79 #define SENCODE_LUN_FAILED_SELF_CONFIG 0x4c
80 #define SENCODE_OVERLAPPED_COMMAND 0x4E
83 * Additional sense codes
86 #define ASENCODE_NO_SENSE 0x00
87 #define ASENCODE_END_OF_DATA 0x05
88 #define ASENCODE_BECOMING_READY 0x01
89 #define ASENCODE_INIT_CMD_REQUIRED 0x02
90 #define ASENCODE_PARAM_LIST_LENGTH_ERROR 0x00
91 #define ASENCODE_INVALID_COMMAND 0x00
92 #define ASENCODE_LBA_OUT_OF_RANGE 0x00
93 #define ASENCODE_INVALID_CDB_FIELD 0x00
94 #define ASENCODE_LUN_NOT_SUPPORTED 0x00
95 #define ASENCODE_INVALID_PARAM_FIELD 0x00
96 #define ASENCODE_PARAM_NOT_SUPPORTED 0x01
97 #define ASENCODE_PARAM_VALUE_INVALID 0x02
98 #define ASENCODE_RESET_OCCURRED 0x00
99 #define ASENCODE_LUN_NOT_SELF_CONFIGURED_YET 0x00
100 #define ASENCODE_INQUIRY_DATA_CHANGED 0x03
101 #define ASENCODE_SAVING_PARAMS_NOT_SUPPORTED 0x00
102 #define ASENCODE_DIAGNOSTIC_FAILURE 0x80
103 #define ASENCODE_INTERNAL_TARGET_FAILURE 0x00
104 #define ASENCODE_INVALID_MESSAGE_ERROR 0x00
105 #define ASENCODE_LUN_FAILED_SELF_CONFIG 0x00
106 #define ASENCODE_OVERLAPPED_COMMAND 0x00
108 #define BYTE0(x) (unsigned char)(x)
109 #define BYTE1(x) (unsigned char)((x) >> 8)
110 #define BYTE2(x) (unsigned char)((x) >> 16)
111 #define BYTE3(x) (unsigned char)((x) >> 24)
113 /*------------------------------------------------------------------------------
114 * S T R U C T S / T Y P E D E F S
115 *----------------------------------------------------------------------------*/
116 /* SCSI inquiry data */
117 struct inquiry_data
{
118 u8 inqd_pdt
; /* Peripheral qualifier | Peripheral Device Type */
119 u8 inqd_dtq
; /* RMB | Device Type Qualifier */
120 u8 inqd_ver
; /* ISO version | ECMA version | ANSI-approved version */
121 u8 inqd_rdf
; /* AENC | TrmIOP | Response data format */
122 u8 inqd_len
; /* Additional length (n-4) */
123 u8 inqd_pad1
[2];/* Reserved - must be zero */
124 u8 inqd_pad2
; /* RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
125 u8 inqd_vid
[8]; /* Vendor ID */
126 u8 inqd_pid
[16];/* Product ID */
127 u8 inqd_prl
[4]; /* Product Revision Level */
131 * M O D U L E G L O B A L S
134 static unsigned long aac_build_sg(struct scsi_cmnd
* scsicmd
, struct sgmap
* sgmap
);
135 static unsigned long aac_build_sg64(struct scsi_cmnd
* scsicmd
, struct sgmap64
* psg
);
136 static unsigned long aac_build_sgraw(struct scsi_cmnd
* scsicmd
, struct sgmapraw
* psg
);
137 static int aac_send_srb_fib(struct scsi_cmnd
* scsicmd
);
138 #ifdef AAC_DETAILED_STATUS_INFO
139 static char *aac_get_status_string(u32 status
);
143 * Non dasd selection is handled entirely in aachba now
146 static int nondasd
= -1;
147 static int aac_cache
= 0;
148 static int dacmode
= -1;
151 int startup_timeout
= 180;
152 int aif_timeout
= 120;
154 module_param(nondasd
, int, S_IRUGO
|S_IWUSR
);
155 MODULE_PARM_DESC(nondasd
, "Control scanning of hba for nondasd devices. 0=off, 1=on");
156 module_param_named(cache
, aac_cache
, int, S_IRUGO
|S_IWUSR
);
157 MODULE_PARM_DESC(cache
, "Disable Queue Flush commands:\n\tbit 0 - Disable FUA in WRITE SCSI commands\n\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n\tbit 2 - Disable only if Battery not protecting Cache");
158 module_param(dacmode
, int, S_IRUGO
|S_IWUSR
);
159 MODULE_PARM_DESC(dacmode
, "Control whether dma addressing is using 64 bit DAC. 0=off, 1=on");
160 module_param_named(commit
, aac_commit
, int, S_IRUGO
|S_IWUSR
);
161 MODULE_PARM_DESC(commit
, "Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays.\nThis is typically needed in systems that do not have a BIOS. 0=off, 1=on");
162 module_param(startup_timeout
, int, S_IRUGO
|S_IWUSR
);
163 MODULE_PARM_DESC(startup_timeout
, "The duration of time in seconds to wait for adapter to have it's kernel up and\nrunning. This is typically adjusted for large systems that do not have a BIOS.");
164 module_param(aif_timeout
, int, S_IRUGO
|S_IWUSR
);
165 MODULE_PARM_DESC(aif_timeout
, "The duration of time in seconds to wait for applications to pick up AIFs before\nderegistering them. This is typically adjusted for heavily burdened systems.");
168 module_param(numacb
, int, S_IRUGO
|S_IWUSR
);
169 MODULE_PARM_DESC(numacb
, "Request a limit to the number of adapter control blocks (FIB) allocated. Valid values are 512 and down. Default is to use suggestion from Firmware.");
172 module_param(acbsize
, int, S_IRUGO
|S_IWUSR
);
173 MODULE_PARM_DESC(acbsize
, "Request a specific adapter control block (FIB) size. Valid values are 512, 2048, 4096 and 8192. Default is to use suggestion from Firmware.");
175 int update_interval
= 30 * 60;
176 module_param(update_interval
, int, S_IRUGO
|S_IWUSR
);
177 MODULE_PARM_DESC(update_interval
, "Interval in seconds between time sync updates issued to adapter.");
179 int check_interval
= 24 * 60 * 60;
180 module_param(check_interval
, int, S_IRUGO
|S_IWUSR
);
181 MODULE_PARM_DESC(check_interval
, "Interval in seconds between adapter health checks.");
183 int aac_check_reset
= 1;
184 module_param_named(check_reset
, aac_check_reset
, int, S_IRUGO
|S_IWUSR
);
185 MODULE_PARM_DESC(aac_check_reset
, "If adapter fails health check, reset the adapter. a value of -1 forces the reset to adapters programmed to ignore it.");
187 int expose_physicals
= -1;
188 module_param(expose_physicals
, int, S_IRUGO
|S_IWUSR
);
189 MODULE_PARM_DESC(expose_physicals
, "Expose physical components of the arrays. -1=protect 0=off, 1=on");
191 int aac_reset_devices
= 0;
192 module_param_named(reset_devices
, aac_reset_devices
, int, S_IRUGO
|S_IWUSR
);
193 MODULE_PARM_DESC(reset_devices
, "Force an adapter reset at initialization.");
195 static inline int aac_valid_context(struct scsi_cmnd
*scsicmd
,
196 struct fib
*fibptr
) {
197 struct scsi_device
*device
;
199 if (unlikely(!scsicmd
|| !scsicmd
->scsi_done
)) {
200 dprintk((KERN_WARNING
"aac_valid_context: scsi command corrupt\n"));
201 aac_fib_complete(fibptr
);
202 aac_fib_free(fibptr
);
205 scsicmd
->SCp
.phase
= AAC_OWNER_MIDLEVEL
;
206 device
= scsicmd
->device
;
207 if (unlikely(!device
|| !scsi_device_online(device
))) {
208 dprintk((KERN_WARNING
"aac_valid_context: scsi device corrupt\n"));
209 aac_fib_complete(fibptr
);
210 aac_fib_free(fibptr
);
217 * aac_get_config_status - check the adapter configuration
218 * @common: adapter to query
220 * Query config status, and commit the configuration if needed.
222 int aac_get_config_status(struct aac_dev
*dev
, int commit_flag
)
227 if (!(fibptr
= aac_fib_alloc(dev
)))
230 aac_fib_init(fibptr
);
232 struct aac_get_config_status
*dinfo
;
233 dinfo
= (struct aac_get_config_status
*) fib_data(fibptr
);
235 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
236 dinfo
->type
= cpu_to_le32(CT_GET_CONFIG_STATUS
);
237 dinfo
->count
= cpu_to_le32(sizeof(((struct aac_get_config_status_resp
*)NULL
)->data
));
240 status
= aac_fib_send(ContainerCommand
,
242 sizeof (struct aac_get_config_status
),
247 printk(KERN_WARNING
"aac_get_config_status: SendFIB failed.\n");
249 struct aac_get_config_status_resp
*reply
250 = (struct aac_get_config_status_resp
*) fib_data(fibptr
);
251 dprintk((KERN_WARNING
252 "aac_get_config_status: response=%d status=%d action=%d\n",
253 le32_to_cpu(reply
->response
),
254 le32_to_cpu(reply
->status
),
255 le32_to_cpu(reply
->data
.action
)));
256 if ((le32_to_cpu(reply
->response
) != ST_OK
) ||
257 (le32_to_cpu(reply
->status
) != CT_OK
) ||
258 (le32_to_cpu(reply
->data
.action
) > CFACT_PAUSE
)) {
259 printk(KERN_WARNING
"aac_get_config_status: Will not issue the Commit Configuration\n");
263 aac_fib_complete(fibptr
);
264 /* Send a CT_COMMIT_CONFIG to enable discovery of devices */
266 if ((aac_commit
== 1) || commit_flag
) {
267 struct aac_commit_config
* dinfo
;
268 aac_fib_init(fibptr
);
269 dinfo
= (struct aac_commit_config
*) fib_data(fibptr
);
271 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
272 dinfo
->type
= cpu_to_le32(CT_COMMIT_CONFIG
);
274 status
= aac_fib_send(ContainerCommand
,
276 sizeof (struct aac_commit_config
),
280 aac_fib_complete(fibptr
);
281 } else if (aac_commit
== 0) {
283 "aac_get_config_status: Foreign device configurations are being ignored\n");
286 aac_fib_free(fibptr
);
291 * aac_get_containers - list containers
292 * @common: adapter to probe
294 * Make a list of all containers on this controller
296 int aac_get_containers(struct aac_dev
*dev
)
298 struct fsa_dev_info
*fsa_dev_ptr
;
302 struct aac_get_container_count
*dinfo
;
303 struct aac_get_container_count_resp
*dresp
;
304 int maximum_num_containers
= MAXIMUM_NUM_CONTAINERS
;
306 if (!(fibptr
= aac_fib_alloc(dev
)))
309 aac_fib_init(fibptr
);
310 dinfo
= (struct aac_get_container_count
*) fib_data(fibptr
);
311 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
312 dinfo
->type
= cpu_to_le32(CT_GET_CONTAINER_COUNT
);
314 status
= aac_fib_send(ContainerCommand
,
316 sizeof (struct aac_get_container_count
),
321 dresp
= (struct aac_get_container_count_resp
*)fib_data(fibptr
);
322 maximum_num_containers
= le32_to_cpu(dresp
->ContainerSwitchEntries
);
323 aac_fib_complete(fibptr
);
325 aac_fib_free(fibptr
);
327 if (maximum_num_containers
< MAXIMUM_NUM_CONTAINERS
)
328 maximum_num_containers
= MAXIMUM_NUM_CONTAINERS
;
329 fsa_dev_ptr
= kzalloc(sizeof(*fsa_dev_ptr
) * maximum_num_containers
,
334 dev
->fsa_dev
= fsa_dev_ptr
;
335 dev
->maximum_num_containers
= maximum_num_containers
;
337 for (index
= 0; index
< dev
->maximum_num_containers
; ) {
338 fsa_dev_ptr
[index
].devname
[0] = '\0';
340 status
= aac_probe_container(dev
, index
);
343 printk(KERN_WARNING
"aac_get_containers: SendFIB failed.\n");
348 * If there are no more containers, then stop asking.
350 if (++index
>= status
)
356 static void aac_internal_transfer(struct scsi_cmnd
*scsicmd
, void *data
, unsigned int offset
, unsigned int len
)
360 struct scatterlist
*sg
= scsi_sglist(scsicmd
);
362 buf
= kmap_atomic(sg_page(sg
), KM_IRQ0
) + sg
->offset
;
363 transfer_len
= min(sg
->length
, len
+ offset
);
365 transfer_len
-= offset
;
366 if (buf
&& transfer_len
> 0)
367 memcpy(buf
+ offset
, data
, transfer_len
);
369 flush_kernel_dcache_page(kmap_atomic_to_page(buf
- sg
->offset
));
370 kunmap_atomic(buf
- sg
->offset
, KM_IRQ0
);
374 static void get_container_name_callback(void *context
, struct fib
* fibptr
)
376 struct aac_get_name_resp
* get_name_reply
;
377 struct scsi_cmnd
* scsicmd
;
379 scsicmd
= (struct scsi_cmnd
*) context
;
381 if (!aac_valid_context(scsicmd
, fibptr
))
384 dprintk((KERN_DEBUG
"get_container_name_callback[cpu %d]: t = %ld.\n", smp_processor_id(), jiffies
));
385 BUG_ON(fibptr
== NULL
);
387 get_name_reply
= (struct aac_get_name_resp
*) fib_data(fibptr
);
388 /* Failure is irrelevant, using default value instead */
389 if ((le32_to_cpu(get_name_reply
->status
) == CT_OK
)
390 && (get_name_reply
->data
[0] != '\0')) {
391 char *sp
= get_name_reply
->data
;
392 sp
[sizeof(((struct aac_get_name_resp
*)NULL
)->data
)-1] = '\0';
396 char d
[sizeof(((struct inquiry_data
*)NULL
)->inqd_pid
)];
397 int count
= sizeof(d
);
400 *dp
++ = (*sp
) ? *sp
++ : ' ';
401 } while (--count
> 0);
402 aac_internal_transfer(scsicmd
, d
,
403 offsetof(struct inquiry_data
, inqd_pid
), sizeof(d
));
407 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
409 aac_fib_complete(fibptr
);
410 aac_fib_free(fibptr
);
411 scsicmd
->scsi_done(scsicmd
);
415 * aac_get_container_name - get container name, none blocking.
417 static int aac_get_container_name(struct scsi_cmnd
* scsicmd
)
420 struct aac_get_name
*dinfo
;
421 struct fib
* cmd_fibcontext
;
422 struct aac_dev
* dev
;
424 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
426 if (!(cmd_fibcontext
= aac_fib_alloc(dev
)))
429 aac_fib_init(cmd_fibcontext
);
430 dinfo
= (struct aac_get_name
*) fib_data(cmd_fibcontext
);
432 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
433 dinfo
->type
= cpu_to_le32(CT_READ_NAME
);
434 dinfo
->cid
= cpu_to_le32(scmd_id(scsicmd
));
435 dinfo
->count
= cpu_to_le32(sizeof(((struct aac_get_name_resp
*)NULL
)->data
));
437 status
= aac_fib_send(ContainerCommand
,
439 sizeof (struct aac_get_name
),
442 (fib_callback
)get_container_name_callback
,
446 * Check that the command queued to the controller
448 if (status
== -EINPROGRESS
) {
449 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
453 printk(KERN_WARNING
"aac_get_container_name: aac_fib_send failed with status: %d.\n", status
);
454 aac_fib_complete(cmd_fibcontext
);
455 aac_fib_free(cmd_fibcontext
);
459 static int aac_probe_container_callback2(struct scsi_cmnd
* scsicmd
)
461 struct fsa_dev_info
*fsa_dev_ptr
= ((struct aac_dev
*)(scsicmd
->device
->host
->hostdata
))->fsa_dev
;
463 if ((fsa_dev_ptr
[scmd_id(scsicmd
)].valid
& 1))
464 return aac_scsi_cmd(scsicmd
);
466 scsicmd
->result
= DID_NO_CONNECT
<< 16;
467 scsicmd
->scsi_done(scsicmd
);
471 static void _aac_probe_container2(void * context
, struct fib
* fibptr
)
473 struct fsa_dev_info
*fsa_dev_ptr
;
474 int (*callback
)(struct scsi_cmnd
*);
475 struct scsi_cmnd
* scsicmd
= (struct scsi_cmnd
*)context
;
478 if (!aac_valid_context(scsicmd
, fibptr
))
481 scsicmd
->SCp
.Status
= 0;
482 fsa_dev_ptr
= fibptr
->dev
->fsa_dev
;
484 struct aac_mount
* dresp
= (struct aac_mount
*) fib_data(fibptr
);
485 fsa_dev_ptr
+= scmd_id(scsicmd
);
487 if ((le32_to_cpu(dresp
->status
) == ST_OK
) &&
488 (le32_to_cpu(dresp
->mnt
[0].vol
) != CT_NONE
) &&
489 (le32_to_cpu(dresp
->mnt
[0].state
) != FSCS_HIDDEN
)) {
490 fsa_dev_ptr
->valid
= 1;
491 fsa_dev_ptr
->type
= le32_to_cpu(dresp
->mnt
[0].vol
);
493 = ((u64
)le32_to_cpu(dresp
->mnt
[0].capacity
)) +
494 (((u64
)le32_to_cpu(dresp
->mnt
[0].capacityhigh
)) << 32);
495 fsa_dev_ptr
->ro
= ((le32_to_cpu(dresp
->mnt
[0].state
) & FSCS_READONLY
) != 0);
497 if ((fsa_dev_ptr
->valid
& 1) == 0)
498 fsa_dev_ptr
->valid
= 0;
499 scsicmd
->SCp
.Status
= le32_to_cpu(dresp
->count
);
501 aac_fib_complete(fibptr
);
502 aac_fib_free(fibptr
);
503 callback
= (int (*)(struct scsi_cmnd
*))(scsicmd
->SCp
.ptr
);
504 scsicmd
->SCp
.ptr
= NULL
;
505 (*callback
)(scsicmd
);
509 static void _aac_probe_container1(void * context
, struct fib
* fibptr
)
511 struct scsi_cmnd
* scsicmd
;
512 struct aac_mount
* dresp
;
513 struct aac_query_mount
*dinfo
;
516 dresp
= (struct aac_mount
*) fib_data(fibptr
);
517 dresp
->mnt
[0].capacityhigh
= 0;
518 if ((le32_to_cpu(dresp
->status
) != ST_OK
) ||
519 (le32_to_cpu(dresp
->mnt
[0].vol
) != CT_NONE
)) {
520 _aac_probe_container2(context
, fibptr
);
523 scsicmd
= (struct scsi_cmnd
*) context
;
525 if (!aac_valid_context(scsicmd
, fibptr
))
528 aac_fib_init(fibptr
);
530 dinfo
= (struct aac_query_mount
*)fib_data(fibptr
);
532 dinfo
->command
= cpu_to_le32(VM_NameServe64
);
533 dinfo
->count
= cpu_to_le32(scmd_id(scsicmd
));
534 dinfo
->type
= cpu_to_le32(FT_FILESYS
);
536 status
= aac_fib_send(ContainerCommand
,
538 sizeof(struct aac_query_mount
),
541 _aac_probe_container2
,
544 * Check that the command queued to the controller
546 if (status
== -EINPROGRESS
)
547 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
548 else if (status
< 0) {
549 /* Inherit results from VM_NameServe, if any */
550 dresp
->status
= cpu_to_le32(ST_OK
);
551 _aac_probe_container2(context
, fibptr
);
555 static int _aac_probe_container(struct scsi_cmnd
* scsicmd
, int (*callback
)(struct scsi_cmnd
*))
558 int status
= -ENOMEM
;
560 if ((fibptr
= aac_fib_alloc((struct aac_dev
*)scsicmd
->device
->host
->hostdata
))) {
561 struct aac_query_mount
*dinfo
;
563 aac_fib_init(fibptr
);
565 dinfo
= (struct aac_query_mount
*)fib_data(fibptr
);
567 dinfo
->command
= cpu_to_le32(VM_NameServe
);
568 dinfo
->count
= cpu_to_le32(scmd_id(scsicmd
));
569 dinfo
->type
= cpu_to_le32(FT_FILESYS
);
570 scsicmd
->SCp
.ptr
= (char *)callback
;
572 status
= aac_fib_send(ContainerCommand
,
574 sizeof(struct aac_query_mount
),
577 _aac_probe_container1
,
580 * Check that the command queued to the controller
582 if (status
== -EINPROGRESS
) {
583 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
587 scsicmd
->SCp
.ptr
= NULL
;
588 aac_fib_complete(fibptr
);
589 aac_fib_free(fibptr
);
593 struct fsa_dev_info
*fsa_dev_ptr
= ((struct aac_dev
*)(scsicmd
->device
->host
->hostdata
))->fsa_dev
;
595 fsa_dev_ptr
+= scmd_id(scsicmd
);
596 if ((fsa_dev_ptr
->valid
& 1) == 0) {
597 fsa_dev_ptr
->valid
= 0;
598 return (*callback
)(scsicmd
);
606 * aac_probe_container - query a logical volume
607 * @dev: device to query
608 * @cid: container identifier
610 * Queries the controller about the given volume. The volume information
611 * is updated in the struct fsa_dev_info structure rather than returned.
613 static int aac_probe_container_callback1(struct scsi_cmnd
* scsicmd
)
615 scsicmd
->device
= NULL
;
619 int aac_probe_container(struct aac_dev
*dev
, int cid
)
621 struct scsi_cmnd
*scsicmd
= kmalloc(sizeof(*scsicmd
), GFP_KERNEL
);
622 struct scsi_device
*scsidev
= kmalloc(sizeof(*scsidev
), GFP_KERNEL
);
625 if (!scsicmd
|| !scsidev
) {
630 scsicmd
->list
.next
= NULL
;
631 scsicmd
->scsi_done
= (void (*)(struct scsi_cmnd
*))aac_probe_container_callback1
;
633 scsicmd
->device
= scsidev
;
634 scsidev
->sdev_state
= 0;
636 scsidev
->host
= dev
->scsi_host_ptr
;
638 if (_aac_probe_container(scsicmd
, aac_probe_container_callback1
) == 0)
639 while (scsicmd
->device
== scsidev
)
642 status
= scsicmd
->SCp
.Status
;
647 /* Local Structure to set SCSI inquiry data strings */
649 char vid
[8]; /* Vendor ID */
650 char pid
[16]; /* Product ID */
651 char prl
[4]; /* Product Revision Level */
655 * InqStrCopy - string merge
656 * @a: string to copy from
657 * @b: string to copy to
659 * Copy a String from one location to another
663 static void inqstrcpy(char *a
, char *b
)
666 while (*a
!= (char)0)
670 static char *container_types
[] = {
694 char * get_container_type(unsigned tindex
)
696 if (tindex
>= ARRAY_SIZE(container_types
))
697 tindex
= ARRAY_SIZE(container_types
) - 1;
698 return container_types
[tindex
];
701 /* Function: setinqstr
703 * Arguments: [1] pointer to void [1] int
705 * Purpose: Sets SCSI inquiry data strings for vendor, product
706 * and revision level. Allows strings to be set in platform dependant
707 * files instead of in OS dependant driver source.
710 static void setinqstr(struct aac_dev
*dev
, void *data
, int tindex
)
712 struct scsi_inq
*str
;
714 str
= (struct scsi_inq
*)(data
); /* cast data to scsi inq block */
715 memset(str
, ' ', sizeof(*str
));
717 if (dev
->supplement_adapter_info
.AdapterTypeText
[0]) {
718 char * cp
= dev
->supplement_adapter_info
.AdapterTypeText
;
720 if ((cp
[0] == 'A') && (cp
[1] == 'O') && (cp
[2] == 'C'))
721 inqstrcpy("SMC", str
->vid
);
723 c
= sizeof(str
->vid
);
724 while (*cp
&& *cp
!= ' ' && --c
)
728 inqstrcpy (dev
->supplement_adapter_info
.AdapterTypeText
,
731 while (*cp
&& *cp
!= ' ')
736 /* last six chars reserved for vol type */
738 if (strlen(cp
) > sizeof(str
->pid
)) {
739 c
= cp
[sizeof(str
->pid
)];
740 cp
[sizeof(str
->pid
)] = '\0';
742 inqstrcpy (cp
, str
->pid
);
744 cp
[sizeof(str
->pid
)] = c
;
746 struct aac_driver_ident
*mp
= aac_get_driver_ident(dev
->cardtype
);
748 inqstrcpy (mp
->vname
, str
->vid
);
749 /* last six chars reserved for vol type */
750 inqstrcpy (mp
->model
, str
->pid
);
753 if (tindex
< ARRAY_SIZE(container_types
)){
754 char *findit
= str
->pid
;
756 for ( ; *findit
!= ' '; findit
++); /* walk till we find a space */
757 /* RAID is superfluous in the context of a RAID device */
758 if (memcmp(findit
-4, "RAID", 4) == 0)
759 *(findit
-= 4) = ' ';
760 if (((findit
- str
->pid
) + strlen(container_types
[tindex
]))
761 < (sizeof(str
->pid
) + sizeof(str
->prl
)))
762 inqstrcpy (container_types
[tindex
], findit
+ 1);
764 inqstrcpy ("V1.0", str
->prl
);
767 static void get_container_serial_callback(void *context
, struct fib
* fibptr
)
769 struct aac_get_serial_resp
* get_serial_reply
;
770 struct scsi_cmnd
* scsicmd
;
772 BUG_ON(fibptr
== NULL
);
774 scsicmd
= (struct scsi_cmnd
*) context
;
775 if (!aac_valid_context(scsicmd
, fibptr
))
778 get_serial_reply
= (struct aac_get_serial_resp
*) fib_data(fibptr
);
779 /* Failure is irrelevant, using default value instead */
780 if (le32_to_cpu(get_serial_reply
->status
) == CT_OK
) {
784 sp
[1] = scsicmd
->cmnd
[2];
786 sp
[3] = snprintf(sp
+4, sizeof(sp
)-4, "%08X",
787 le32_to_cpu(get_serial_reply
->uid
));
788 aac_internal_transfer(scsicmd
, sp
, 0, sizeof(sp
));
791 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
793 aac_fib_complete(fibptr
);
794 aac_fib_free(fibptr
);
795 scsicmd
->scsi_done(scsicmd
);
799 * aac_get_container_serial - get container serial, none blocking.
801 static int aac_get_container_serial(struct scsi_cmnd
* scsicmd
)
804 struct aac_get_serial
*dinfo
;
805 struct fib
* cmd_fibcontext
;
806 struct aac_dev
* dev
;
808 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
810 if (!(cmd_fibcontext
= aac_fib_alloc(dev
)))
813 aac_fib_init(cmd_fibcontext
);
814 dinfo
= (struct aac_get_serial
*) fib_data(cmd_fibcontext
);
816 dinfo
->command
= cpu_to_le32(VM_ContainerConfig
);
817 dinfo
->type
= cpu_to_le32(CT_CID_TO_32BITS_UID
);
818 dinfo
->cid
= cpu_to_le32(scmd_id(scsicmd
));
820 status
= aac_fib_send(ContainerCommand
,
822 sizeof (struct aac_get_serial
),
825 (fib_callback
) get_container_serial_callback
,
829 * Check that the command queued to the controller
831 if (status
== -EINPROGRESS
) {
832 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
836 printk(KERN_WARNING
"aac_get_container_serial: aac_fib_send failed with status: %d.\n", status
);
837 aac_fib_complete(cmd_fibcontext
);
838 aac_fib_free(cmd_fibcontext
);
842 /* Function: setinqserial
844 * Arguments: [1] pointer to void [1] int
846 * Purpose: Sets SCSI Unit Serial number.
847 * This is a fake. We should read a proper
848 * serial number from the container. <SuSE>But
849 * without docs it's quite hard to do it :-)
850 * So this will have to do in the meantime.</SuSE>
853 static int setinqserial(struct aac_dev
*dev
, void *data
, int cid
)
856 * This breaks array migration.
858 return snprintf((char *)(data
), sizeof(struct scsi_inq
) - 4, "%08X%02X",
859 le32_to_cpu(dev
->adapter_info
.serial
[0]), cid
);
862 static void set_sense(u8
*sense_buf
, u8 sense_key
, u8 sense_code
,
863 u8 a_sense_code
, u8 incorrect_length
,
864 u8 bit_pointer
, u16 field_pointer
,
867 sense_buf
[0] = 0xF0; /* Sense data valid, err code 70h (current error) */
868 sense_buf
[1] = 0; /* Segment number, always zero */
870 if (incorrect_length
) {
871 sense_buf
[2] = sense_key
| 0x20;/* Set ILI bit | sense key */
872 sense_buf
[3] = BYTE3(residue
);
873 sense_buf
[4] = BYTE2(residue
);
874 sense_buf
[5] = BYTE1(residue
);
875 sense_buf
[6] = BYTE0(residue
);
877 sense_buf
[2] = sense_key
; /* Sense key */
879 if (sense_key
== ILLEGAL_REQUEST
)
880 sense_buf
[7] = 10; /* Additional sense length */
882 sense_buf
[7] = 6; /* Additional sense length */
884 sense_buf
[12] = sense_code
; /* Additional sense code */
885 sense_buf
[13] = a_sense_code
; /* Additional sense code qualifier */
886 if (sense_key
== ILLEGAL_REQUEST
) {
889 if (sense_code
== SENCODE_INVALID_PARAM_FIELD
)
890 sense_buf
[15] = 0x80;/* Std sense key specific field */
891 /* Illegal parameter is in the parameter block */
893 if (sense_code
== SENCODE_INVALID_CDB_FIELD
)
894 sense_buf
[15] = 0xc0;/* Std sense key specific field */
895 /* Illegal parameter is in the CDB block */
896 sense_buf
[15] |= bit_pointer
;
897 sense_buf
[16] = field_pointer
>> 8; /* MSB */
898 sense_buf
[17] = field_pointer
; /* LSB */
902 static int aac_bounds_32(struct aac_dev
* dev
, struct scsi_cmnd
* cmd
, u64 lba
)
904 if (lba
& 0xffffffff00000000LL
) {
905 int cid
= scmd_id(cmd
);
906 dprintk((KERN_DEBUG
"aacraid: Illegal lba\n"));
907 cmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 |
908 SAM_STAT_CHECK_CONDITION
;
909 set_sense((u8
*) &dev
->fsa_dev
[cid
].sense_data
,
911 SENCODE_INTERNAL_TARGET_FAILURE
,
912 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0,
914 memcpy(cmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
915 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
916 SCSI_SENSE_BUFFERSIZE
));
923 static int aac_bounds_64(struct aac_dev
* dev
, struct scsi_cmnd
* cmd
, u64 lba
)
928 static void io_callback(void *context
, struct fib
* fibptr
);
930 static int aac_read_raw_io(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
933 struct aac_raw_io
*readcmd
;
935 readcmd
= (struct aac_raw_io
*) fib_data(fib
);
936 readcmd
->block
[0] = cpu_to_le32((u32
)(lba
&0xffffffff));
937 readcmd
->block
[1] = cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
938 readcmd
->count
= cpu_to_le32(count
<<9);
939 readcmd
->cid
= cpu_to_le16(scmd_id(cmd
));
940 readcmd
->flags
= cpu_to_le16(IO_TYPE_READ
);
941 readcmd
->bpTotal
= 0;
942 readcmd
->bpComplete
= 0;
944 aac_build_sgraw(cmd
, &readcmd
->sg
);
945 fibsize
= sizeof(struct aac_raw_io
) + ((le32_to_cpu(readcmd
->sg
.count
) - 1) * sizeof (struct sgentryraw
));
946 BUG_ON(fibsize
> (fib
->dev
->max_fib_size
- sizeof(struct aac_fibhdr
)));
948 * Now send the Fib to the adapter
950 return aac_fib_send(ContainerRawIo
,
955 (fib_callback
) io_callback
,
959 static int aac_read_block64(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
962 struct aac_read64
*readcmd
;
964 readcmd
= (struct aac_read64
*) fib_data(fib
);
965 readcmd
->command
= cpu_to_le32(VM_CtHostRead64
);
966 readcmd
->cid
= cpu_to_le16(scmd_id(cmd
));
967 readcmd
->sector_count
= cpu_to_le16(count
);
968 readcmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
972 aac_build_sg64(cmd
, &readcmd
->sg
);
973 fibsize
= sizeof(struct aac_read64
) +
974 ((le32_to_cpu(readcmd
->sg
.count
) - 1) *
975 sizeof (struct sgentry64
));
976 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
977 sizeof(struct aac_fibhdr
)));
979 * Now send the Fib to the adapter
981 return aac_fib_send(ContainerCommand64
,
986 (fib_callback
) io_callback
,
990 static int aac_read_block(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
)
993 struct aac_read
*readcmd
;
995 readcmd
= (struct aac_read
*) fib_data(fib
);
996 readcmd
->command
= cpu_to_le32(VM_CtBlockRead
);
997 readcmd
->cid
= cpu_to_le32(scmd_id(cmd
));
998 readcmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
999 readcmd
->count
= cpu_to_le32(count
* 512);
1001 aac_build_sg(cmd
, &readcmd
->sg
);
1002 fibsize
= sizeof(struct aac_read
) +
1003 ((le32_to_cpu(readcmd
->sg
.count
) - 1) *
1004 sizeof (struct sgentry
));
1005 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1006 sizeof(struct aac_fibhdr
)));
1008 * Now send the Fib to the adapter
1010 return aac_fib_send(ContainerCommand
,
1015 (fib_callback
) io_callback
,
1019 static int aac_write_raw_io(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1022 struct aac_raw_io
*writecmd
;
1024 writecmd
= (struct aac_raw_io
*) fib_data(fib
);
1025 writecmd
->block
[0] = cpu_to_le32((u32
)(lba
&0xffffffff));
1026 writecmd
->block
[1] = cpu_to_le32((u32
)((lba
&0xffffffff00000000LL
)>>32));
1027 writecmd
->count
= cpu_to_le32(count
<<9);
1028 writecmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1029 writecmd
->flags
= (fua
&& ((aac_cache
& 5) != 1) &&
1030 (((aac_cache
& 5) != 5) || !fib
->dev
->cache_protected
)) ?
1031 cpu_to_le16(IO_TYPE_WRITE
|IO_SUREWRITE
) :
1032 cpu_to_le16(IO_TYPE_WRITE
);
1033 writecmd
->bpTotal
= 0;
1034 writecmd
->bpComplete
= 0;
1036 aac_build_sgraw(cmd
, &writecmd
->sg
);
1037 fibsize
= sizeof(struct aac_raw_io
) + ((le32_to_cpu(writecmd
->sg
.count
) - 1) * sizeof (struct sgentryraw
));
1038 BUG_ON(fibsize
> (fib
->dev
->max_fib_size
- sizeof(struct aac_fibhdr
)));
1040 * Now send the Fib to the adapter
1042 return aac_fib_send(ContainerRawIo
,
1047 (fib_callback
) io_callback
,
1051 static int aac_write_block64(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1054 struct aac_write64
*writecmd
;
1056 writecmd
= (struct aac_write64
*) fib_data(fib
);
1057 writecmd
->command
= cpu_to_le32(VM_CtHostWrite64
);
1058 writecmd
->cid
= cpu_to_le16(scmd_id(cmd
));
1059 writecmd
->sector_count
= cpu_to_le16(count
);
1060 writecmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1062 writecmd
->flags
= 0;
1064 aac_build_sg64(cmd
, &writecmd
->sg
);
1065 fibsize
= sizeof(struct aac_write64
) +
1066 ((le32_to_cpu(writecmd
->sg
.count
) - 1) *
1067 sizeof (struct sgentry64
));
1068 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1069 sizeof(struct aac_fibhdr
)));
1071 * Now send the Fib to the adapter
1073 return aac_fib_send(ContainerCommand64
,
1078 (fib_callback
) io_callback
,
1082 static int aac_write_block(struct fib
* fib
, struct scsi_cmnd
* cmd
, u64 lba
, u32 count
, int fua
)
1085 struct aac_write
*writecmd
;
1087 writecmd
= (struct aac_write
*) fib_data(fib
);
1088 writecmd
->command
= cpu_to_le32(VM_CtBlockWrite
);
1089 writecmd
->cid
= cpu_to_le32(scmd_id(cmd
));
1090 writecmd
->block
= cpu_to_le32((u32
)(lba
&0xffffffff));
1091 writecmd
->count
= cpu_to_le32(count
* 512);
1092 writecmd
->sg
.count
= cpu_to_le32(1);
1093 /* ->stable is not used - it did mean which type of write */
1095 aac_build_sg(cmd
, &writecmd
->sg
);
1096 fibsize
= sizeof(struct aac_write
) +
1097 ((le32_to_cpu(writecmd
->sg
.count
) - 1) *
1098 sizeof (struct sgentry
));
1099 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1100 sizeof(struct aac_fibhdr
)));
1102 * Now send the Fib to the adapter
1104 return aac_fib_send(ContainerCommand
,
1109 (fib_callback
) io_callback
,
1113 static struct aac_srb
* aac_scsi_common(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1115 struct aac_srb
* srbcmd
;
1120 switch(cmd
->sc_data_direction
){
1124 case DMA_BIDIRECTIONAL
:
1125 flag
= SRB_DataIn
| SRB_DataOut
;
1127 case DMA_FROM_DEVICE
:
1131 default: /* shuts up some versions of gcc */
1132 flag
= SRB_NoDataXfer
;
1136 srbcmd
= (struct aac_srb
*) fib_data(fib
);
1137 srbcmd
->function
= cpu_to_le32(SRBF_ExecuteScsi
);
1138 srbcmd
->channel
= cpu_to_le32(aac_logical_to_phys(scmd_channel(cmd
)));
1139 srbcmd
->id
= cpu_to_le32(scmd_id(cmd
));
1140 srbcmd
->lun
= cpu_to_le32(cmd
->device
->lun
);
1141 srbcmd
->flags
= cpu_to_le32(flag
);
1142 timeout
= cmd
->timeout_per_command
/HZ
;
1145 srbcmd
->timeout
= cpu_to_le32(timeout
); // timeout in seconds
1146 srbcmd
->retry_limit
= 0; /* Obsolete parameter */
1147 srbcmd
->cdb_size
= cpu_to_le32(cmd
->cmd_len
);
1151 static void aac_srb_callback(void *context
, struct fib
* fibptr
);
1153 static int aac_scsi_64(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1156 struct aac_srb
* srbcmd
= aac_scsi_common(fib
, cmd
);
1158 aac_build_sg64(cmd
, (struct sgmap64
*) &srbcmd
->sg
);
1159 srbcmd
->count
= cpu_to_le32(scsi_bufflen(cmd
));
1161 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1162 memcpy(srbcmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1164 * Build Scatter/Gather list
1166 fibsize
= sizeof (struct aac_srb
) - sizeof (struct sgentry
) +
1167 ((le32_to_cpu(srbcmd
->sg
.count
) & 0xff) *
1168 sizeof (struct sgentry64
));
1169 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1170 sizeof(struct aac_fibhdr
)));
1173 * Now send the Fib to the adapter
1175 return aac_fib_send(ScsiPortCommand64
, fib
,
1176 fibsize
, FsaNormal
, 0, 1,
1177 (fib_callback
) aac_srb_callback
,
1181 static int aac_scsi_32(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1184 struct aac_srb
* srbcmd
= aac_scsi_common(fib
, cmd
);
1186 aac_build_sg(cmd
, (struct sgmap
*)&srbcmd
->sg
);
1187 srbcmd
->count
= cpu_to_le32(scsi_bufflen(cmd
));
1189 memset(srbcmd
->cdb
, 0, sizeof(srbcmd
->cdb
));
1190 memcpy(srbcmd
->cdb
, cmd
->cmnd
, cmd
->cmd_len
);
1192 * Build Scatter/Gather list
1194 fibsize
= sizeof (struct aac_srb
) +
1195 (((le32_to_cpu(srbcmd
->sg
.count
) & 0xff) - 1) *
1196 sizeof (struct sgentry
));
1197 BUG_ON (fibsize
> (fib
->dev
->max_fib_size
-
1198 sizeof(struct aac_fibhdr
)));
1201 * Now send the Fib to the adapter
1203 return aac_fib_send(ScsiPortCommand
, fib
, fibsize
, FsaNormal
, 0, 1,
1204 (fib_callback
) aac_srb_callback
, (void *) cmd
);
1207 static int aac_scsi_32_64(struct fib
* fib
, struct scsi_cmnd
* cmd
)
1209 if ((sizeof(dma_addr_t
) > 4) &&
1210 (num_physpages
> (0xFFFFFFFFULL
>> PAGE_SHIFT
)) &&
1211 (fib
->dev
->adapter_info
.options
& AAC_OPT_SGMAP_HOST64
))
1213 return aac_scsi_32(fib
, cmd
);
1216 int aac_get_adapter_info(struct aac_dev
* dev
)
1221 struct aac_adapter_info
*info
;
1222 struct aac_bus_info
*command
;
1223 struct aac_bus_info_response
*bus_info
;
1225 if (!(fibptr
= aac_fib_alloc(dev
)))
1228 aac_fib_init(fibptr
);
1229 info
= (struct aac_adapter_info
*) fib_data(fibptr
);
1230 memset(info
,0,sizeof(*info
));
1232 rcode
= aac_fib_send(RequestAdapterInfo
,
1236 -1, 1, /* First `interrupt' command uses special wait */
1241 aac_fib_complete(fibptr
);
1242 aac_fib_free(fibptr
);
1245 memcpy(&dev
->adapter_info
, info
, sizeof(*info
));
1247 if (dev
->adapter_info
.options
& AAC_OPT_SUPPLEMENT_ADAPTER_INFO
) {
1248 struct aac_supplement_adapter_info
* sinfo
;
1250 aac_fib_init(fibptr
);
1252 sinfo
= (struct aac_supplement_adapter_info
*) fib_data(fibptr
);
1254 memset(sinfo
,0,sizeof(*sinfo
));
1256 rcode
= aac_fib_send(RequestSupplementAdapterInfo
,
1265 memcpy(&dev
->supplement_adapter_info
, sinfo
, sizeof(*sinfo
));
1273 aac_fib_init(fibptr
);
1275 bus_info
= (struct aac_bus_info_response
*) fib_data(fibptr
);
1277 memset(bus_info
, 0, sizeof(*bus_info
));
1279 command
= (struct aac_bus_info
*)bus_info
;
1281 command
->Command
= cpu_to_le32(VM_Ioctl
);
1282 command
->ObjType
= cpu_to_le32(FT_DRIVE
);
1283 command
->MethodId
= cpu_to_le32(1);
1284 command
->CtlCmd
= cpu_to_le32(GetBusInfo
);
1286 rcode
= aac_fib_send(ContainerCommand
,
1293 /* reasoned default */
1294 dev
->maximum_num_physicals
= 16;
1295 if (rcode
>= 0 && le32_to_cpu(bus_info
->Status
) == ST_OK
) {
1296 dev
->maximum_num_physicals
= le32_to_cpu(bus_info
->TargetsPerBus
);
1297 dev
->maximum_num_channels
= le32_to_cpu(bus_info
->BusCount
);
1300 if (!dev
->in_reset
) {
1302 tmp
= le32_to_cpu(dev
->adapter_info
.kernelrev
);
1303 printk(KERN_INFO
"%s%d: kernel %d.%d-%d[%d] %.*s\n",
1309 le32_to_cpu(dev
->adapter_info
.kernelbuild
),
1310 (int)sizeof(dev
->supplement_adapter_info
.BuildDate
),
1311 dev
->supplement_adapter_info
.BuildDate
);
1312 tmp
= le32_to_cpu(dev
->adapter_info
.monitorrev
);
1313 printk(KERN_INFO
"%s%d: monitor %d.%d-%d[%d]\n",
1315 tmp
>>24,(tmp
>>16)&0xff,tmp
&0xff,
1316 le32_to_cpu(dev
->adapter_info
.monitorbuild
));
1317 tmp
= le32_to_cpu(dev
->adapter_info
.biosrev
);
1318 printk(KERN_INFO
"%s%d: bios %d.%d-%d[%d]\n",
1320 tmp
>>24,(tmp
>>16)&0xff,tmp
&0xff,
1321 le32_to_cpu(dev
->adapter_info
.biosbuild
));
1323 if (aac_show_serial_number(
1324 shost_to_class(dev
->scsi_host_ptr
), buffer
))
1325 printk(KERN_INFO
"%s%d: serial %s",
1326 dev
->name
, dev
->id
, buffer
);
1327 if (dev
->supplement_adapter_info
.VpdInfo
.Tsid
[0]) {
1328 printk(KERN_INFO
"%s%d: TSID %.*s\n",
1330 (int)sizeof(dev
->supplement_adapter_info
.VpdInfo
.Tsid
),
1331 dev
->supplement_adapter_info
.VpdInfo
.Tsid
);
1333 if (!aac_check_reset
|| ((aac_check_reset
!= 1) &&
1334 (dev
->supplement_adapter_info
.SupportedOptions2
&
1335 AAC_OPTION_IGNORE_RESET
))) {
1336 printk(KERN_INFO
"%s%d: Reset Adapter Ignored\n",
1337 dev
->name
, dev
->id
);
1341 dev
->cache_protected
= 0;
1342 dev
->jbod
= ((dev
->supplement_adapter_info
.FeatureBits
&
1343 AAC_FEATURE_JBOD
) != 0);
1344 dev
->nondasd_support
= 0;
1345 dev
->raid_scsi_mode
= 0;
1346 if(dev
->adapter_info
.options
& AAC_OPT_NONDASD
)
1347 dev
->nondasd_support
= 1;
1350 * If the firmware supports ROMB RAID/SCSI mode and we are currently
1351 * in RAID/SCSI mode, set the flag. For now if in this mode we will
1352 * force nondasd support on. If we decide to allow the non-dasd flag
1353 * additional changes changes will have to be made to support
1354 * RAID/SCSI. the function aac_scsi_cmd in this module will have to be
1355 * changed to support the new dev->raid_scsi_mode flag instead of
1356 * leaching off of the dev->nondasd_support flag. Also in linit.c the
1357 * function aac_detect will have to be modified where it sets up the
1358 * max number of channels based on the aac->nondasd_support flag only.
1360 if ((dev
->adapter_info
.options
& AAC_OPT_SCSI_MANAGED
) &&
1361 (dev
->adapter_info
.options
& AAC_OPT_RAID_SCSI_MODE
)) {
1362 dev
->nondasd_support
= 1;
1363 dev
->raid_scsi_mode
= 1;
1365 if (dev
->raid_scsi_mode
!= 0)
1366 printk(KERN_INFO
"%s%d: ROMB RAID/SCSI mode enabled\n",
1367 dev
->name
, dev
->id
);
1370 dev
->nondasd_support
= (nondasd
!=0);
1371 if(dev
->nondasd_support
!= 0) {
1372 printk(KERN_INFO
"%s%d: Non-DASD support enabled.\n",dev
->name
, dev
->id
);
1375 dev
->dac_support
= 0;
1376 if( (sizeof(dma_addr_t
) > 4) && (dev
->adapter_info
.options
& AAC_OPT_SGMAP_HOST64
)){
1377 printk(KERN_INFO
"%s%d: 64bit support enabled.\n", dev
->name
, dev
->id
);
1378 dev
->dac_support
= 1;
1382 dev
->dac_support
= (dacmode
!=0);
1384 if(dev
->dac_support
!= 0) {
1385 if (!pci_set_dma_mask(dev
->pdev
, DMA_64BIT_MASK
) &&
1386 !pci_set_consistent_dma_mask(dev
->pdev
, DMA_64BIT_MASK
)) {
1387 printk(KERN_INFO
"%s%d: 64 Bit DAC enabled\n",
1388 dev
->name
, dev
->id
);
1389 } else if (!pci_set_dma_mask(dev
->pdev
, DMA_32BIT_MASK
) &&
1390 !pci_set_consistent_dma_mask(dev
->pdev
, DMA_32BIT_MASK
)) {
1391 printk(KERN_INFO
"%s%d: DMA mask set failed, 64 Bit DAC disabled\n",
1392 dev
->name
, dev
->id
);
1393 dev
->dac_support
= 0;
1395 printk(KERN_WARNING
"%s%d: No suitable DMA available.\n",
1396 dev
->name
, dev
->id
);
1401 * Deal with configuring for the individualized limits of each packet
1404 dev
->a_ops
.adapter_scsi
= (dev
->dac_support
)
1405 ? ((aac_get_driver_ident(dev
->cardtype
)->quirks
& AAC_QUIRK_SCSI_32
)
1409 if (dev
->raw_io_interface
) {
1410 dev
->a_ops
.adapter_bounds
= (dev
->raw_io_64
)
1413 dev
->a_ops
.adapter_read
= aac_read_raw_io
;
1414 dev
->a_ops
.adapter_write
= aac_write_raw_io
;
1416 dev
->a_ops
.adapter_bounds
= aac_bounds_32
;
1417 dev
->scsi_host_ptr
->sg_tablesize
= (dev
->max_fib_size
-
1418 sizeof(struct aac_fibhdr
) -
1419 sizeof(struct aac_write
) + sizeof(struct sgentry
)) /
1420 sizeof(struct sgentry
);
1421 if (dev
->dac_support
) {
1422 dev
->a_ops
.adapter_read
= aac_read_block64
;
1423 dev
->a_ops
.adapter_write
= aac_write_block64
;
1425 * 38 scatter gather elements
1427 dev
->scsi_host_ptr
->sg_tablesize
=
1428 (dev
->max_fib_size
-
1429 sizeof(struct aac_fibhdr
) -
1430 sizeof(struct aac_write64
) +
1431 sizeof(struct sgentry64
)) /
1432 sizeof(struct sgentry64
);
1434 dev
->a_ops
.adapter_read
= aac_read_block
;
1435 dev
->a_ops
.adapter_write
= aac_write_block
;
1437 dev
->scsi_host_ptr
->max_sectors
= AAC_MAX_32BIT_SGBCOUNT
;
1438 if(!(dev
->adapter_info
.options
& AAC_OPT_NEW_COMM
)) {
1440 * Worst case size that could cause sg overflow when
1441 * we break up SG elements that are larger than 64KB.
1442 * Would be nice if we could tell the SCSI layer what
1443 * the maximum SG element size can be. Worst case is
1444 * (sg_tablesize-1) 4KB elements with one 64KB
1446 * 32bit -> 468 or 238KB 64bit -> 424 or 212KB
1448 dev
->scsi_host_ptr
->max_sectors
=
1449 (dev
->scsi_host_ptr
->sg_tablesize
* 8) + 112;
1453 aac_fib_complete(fibptr
);
1454 aac_fib_free(fibptr
);
1460 static void io_callback(void *context
, struct fib
* fibptr
)
1462 struct aac_dev
*dev
;
1463 struct aac_read_reply
*readreply
;
1464 struct scsi_cmnd
*scsicmd
;
1467 scsicmd
= (struct scsi_cmnd
*) context
;
1469 if (!aac_valid_context(scsicmd
, fibptr
))
1473 cid
= scmd_id(scsicmd
);
1475 if (nblank(dprintk(x
))) {
1477 switch (scsicmd
->cmnd
[0]) {
1480 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) |
1481 (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
1485 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
1486 ((u64
)scsicmd
->cmnd
[3] << 48) |
1487 ((u64
)scsicmd
->cmnd
[4] << 40) |
1488 ((u64
)scsicmd
->cmnd
[5] << 32) |
1489 ((u64
)scsicmd
->cmnd
[6] << 24) |
1490 (scsicmd
->cmnd
[7] << 16) |
1491 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1495 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
1496 (scsicmd
->cmnd
[3] << 16) |
1497 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1500 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
1501 (scsicmd
->cmnd
[3] << 16) |
1502 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1506 "io_callback[cpu %d]: lba = %llu, t = %ld.\n",
1507 smp_processor_id(), (unsigned long long)lba
, jiffies
);
1510 BUG_ON(fibptr
== NULL
);
1512 scsi_dma_unmap(scsicmd
);
1514 readreply
= (struct aac_read_reply
*)fib_data(fibptr
);
1515 if (le32_to_cpu(readreply
->status
) == ST_OK
)
1516 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
1518 #ifdef AAC_DETAILED_STATUS_INFO
1519 printk(KERN_WARNING
"io_callback: io failed, status = %d\n",
1520 le32_to_cpu(readreply
->status
));
1522 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
1523 set_sense((u8
*) &dev
->fsa_dev
[cid
].sense_data
,
1525 SENCODE_INTERNAL_TARGET_FAILURE
,
1526 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0,
1528 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1529 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1530 SCSI_SENSE_BUFFERSIZE
));
1532 aac_fib_complete(fibptr
);
1533 aac_fib_free(fibptr
);
1535 scsicmd
->scsi_done(scsicmd
);
1538 static int aac_read(struct scsi_cmnd
* scsicmd
)
1543 struct aac_dev
*dev
;
1544 struct fib
* cmd_fibcontext
;
1546 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
1548 * Get block address and transfer length
1550 switch (scsicmd
->cmnd
[0]) {
1552 dprintk((KERN_DEBUG
"aachba: received a read(6) command on id %d.\n", scmd_id(scsicmd
)));
1554 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) |
1555 (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
1556 count
= scsicmd
->cmnd
[4];
1562 dprintk((KERN_DEBUG
"aachba: received a read(16) command on id %d.\n", scmd_id(scsicmd
)));
1564 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
1565 ((u64
)scsicmd
->cmnd
[3] << 48) |
1566 ((u64
)scsicmd
->cmnd
[4] << 40) |
1567 ((u64
)scsicmd
->cmnd
[5] << 32) |
1568 ((u64
)scsicmd
->cmnd
[6] << 24) |
1569 (scsicmd
->cmnd
[7] << 16) |
1570 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1571 count
= (scsicmd
->cmnd
[10] << 24) |
1572 (scsicmd
->cmnd
[11] << 16) |
1573 (scsicmd
->cmnd
[12] << 8) | scsicmd
->cmnd
[13];
1576 dprintk((KERN_DEBUG
"aachba: received a read(12) command on id %d.\n", scmd_id(scsicmd
)));
1578 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
1579 (scsicmd
->cmnd
[3] << 16) |
1580 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1581 count
= (scsicmd
->cmnd
[6] << 24) |
1582 (scsicmd
->cmnd
[7] << 16) |
1583 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1586 dprintk((KERN_DEBUG
"aachba: received a read(10) command on id %d.\n", scmd_id(scsicmd
)));
1588 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) |
1589 (scsicmd
->cmnd
[3] << 16) |
1590 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1591 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
1594 dprintk((KERN_DEBUG
"aac_read[cpu %d]: lba = %llu, t = %ld.\n",
1595 smp_processor_id(), (unsigned long long)lba
, jiffies
));
1596 if (aac_adapter_bounds(dev
,scsicmd
,lba
))
1599 * Alocate and initialize a Fib
1601 if (!(cmd_fibcontext
= aac_fib_alloc(dev
))) {
1605 status
= aac_adapter_read(cmd_fibcontext
, scsicmd
, lba
, count
);
1608 * Check that the command queued to the controller
1610 if (status
== -EINPROGRESS
) {
1611 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
1615 printk(KERN_WARNING
"aac_read: aac_fib_send failed with status: %d.\n", status
);
1617 * For some reason, the Fib didn't queue, return QUEUE_FULL
1619 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_TASK_SET_FULL
;
1620 scsicmd
->scsi_done(scsicmd
);
1621 aac_fib_complete(cmd_fibcontext
);
1622 aac_fib_free(cmd_fibcontext
);
1626 static int aac_write(struct scsi_cmnd
* scsicmd
)
1632 struct aac_dev
*dev
;
1633 struct fib
* cmd_fibcontext
;
1635 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
1637 * Get block address and transfer length
1639 if (scsicmd
->cmnd
[0] == WRITE_6
) /* 6 byte command */
1641 lba
= ((scsicmd
->cmnd
[1] & 0x1F) << 16) | (scsicmd
->cmnd
[2] << 8) | scsicmd
->cmnd
[3];
1642 count
= scsicmd
->cmnd
[4];
1646 } else if (scsicmd
->cmnd
[0] == WRITE_16
) { /* 16 byte command */
1647 dprintk((KERN_DEBUG
"aachba: received a write(16) command on id %d.\n", scmd_id(scsicmd
)));
1649 lba
= ((u64
)scsicmd
->cmnd
[2] << 56) |
1650 ((u64
)scsicmd
->cmnd
[3] << 48) |
1651 ((u64
)scsicmd
->cmnd
[4] << 40) |
1652 ((u64
)scsicmd
->cmnd
[5] << 32) |
1653 ((u64
)scsicmd
->cmnd
[6] << 24) |
1654 (scsicmd
->cmnd
[7] << 16) |
1655 (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1656 count
= (scsicmd
->cmnd
[10] << 24) | (scsicmd
->cmnd
[11] << 16) |
1657 (scsicmd
->cmnd
[12] << 8) | scsicmd
->cmnd
[13];
1658 fua
= scsicmd
->cmnd
[1] & 0x8;
1659 } else if (scsicmd
->cmnd
[0] == WRITE_12
) { /* 12 byte command */
1660 dprintk((KERN_DEBUG
"aachba: received a write(12) command on id %d.\n", scmd_id(scsicmd
)));
1662 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16)
1663 | (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1664 count
= (scsicmd
->cmnd
[6] << 24) | (scsicmd
->cmnd
[7] << 16)
1665 | (scsicmd
->cmnd
[8] << 8) | scsicmd
->cmnd
[9];
1666 fua
= scsicmd
->cmnd
[1] & 0x8;
1668 dprintk((KERN_DEBUG
"aachba: received a write(10) command on id %d.\n", scmd_id(scsicmd
)));
1669 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16) | (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1670 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
1671 fua
= scsicmd
->cmnd
[1] & 0x8;
1673 dprintk((KERN_DEBUG
"aac_write[cpu %d]: lba = %llu, t = %ld.\n",
1674 smp_processor_id(), (unsigned long long)lba
, jiffies
));
1675 if (aac_adapter_bounds(dev
,scsicmd
,lba
))
1678 * Allocate and initialize a Fib then setup a BlockWrite command
1680 if (!(cmd_fibcontext
= aac_fib_alloc(dev
))) {
1681 scsicmd
->result
= DID_ERROR
<< 16;
1682 scsicmd
->scsi_done(scsicmd
);
1686 status
= aac_adapter_write(cmd_fibcontext
, scsicmd
, lba
, count
, fua
);
1689 * Check that the command queued to the controller
1691 if (status
== -EINPROGRESS
) {
1692 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
1696 printk(KERN_WARNING
"aac_write: aac_fib_send failed with status: %d\n", status
);
1698 * For some reason, the Fib didn't queue, return QUEUE_FULL
1700 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_TASK_SET_FULL
;
1701 scsicmd
->scsi_done(scsicmd
);
1703 aac_fib_complete(cmd_fibcontext
);
1704 aac_fib_free(cmd_fibcontext
);
1708 static void synchronize_callback(void *context
, struct fib
*fibptr
)
1710 struct aac_synchronize_reply
*synchronizereply
;
1711 struct scsi_cmnd
*cmd
;
1715 if (!aac_valid_context(cmd
, fibptr
))
1718 dprintk((KERN_DEBUG
"synchronize_callback[cpu %d]: t = %ld.\n",
1719 smp_processor_id(), jiffies
));
1720 BUG_ON(fibptr
== NULL
);
1723 synchronizereply
= fib_data(fibptr
);
1724 if (le32_to_cpu(synchronizereply
->status
) == CT_OK
)
1725 cmd
->result
= DID_OK
<< 16 |
1726 COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
1728 struct scsi_device
*sdev
= cmd
->device
;
1729 struct aac_dev
*dev
= fibptr
->dev
;
1730 u32 cid
= sdev_id(sdev
);
1732 "synchronize_callback: synchronize failed, status = %d\n",
1733 le32_to_cpu(synchronizereply
->status
));
1734 cmd
->result
= DID_OK
<< 16 |
1735 COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
1736 set_sense((u8
*)&dev
->fsa_dev
[cid
].sense_data
,
1738 SENCODE_INTERNAL_TARGET_FAILURE
,
1739 ASENCODE_INTERNAL_TARGET_FAILURE
, 0, 0,
1741 memcpy(cmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1742 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1743 SCSI_SENSE_BUFFERSIZE
));
1746 aac_fib_complete(fibptr
);
1747 aac_fib_free(fibptr
);
1748 cmd
->scsi_done(cmd
);
1751 static int aac_synchronize(struct scsi_cmnd
*scsicmd
)
1754 struct fib
*cmd_fibcontext
;
1755 struct aac_synchronize
*synchronizecmd
;
1756 struct scsi_cmnd
*cmd
;
1757 struct scsi_device
*sdev
= scsicmd
->device
;
1759 struct aac_dev
*aac
;
1760 u64 lba
= ((u64
)scsicmd
->cmnd
[2] << 24) | (scsicmd
->cmnd
[3] << 16) |
1761 (scsicmd
->cmnd
[4] << 8) | scsicmd
->cmnd
[5];
1762 u32 count
= (scsicmd
->cmnd
[7] << 8) | scsicmd
->cmnd
[8];
1763 unsigned long flags
;
1766 * Wait for all outstanding queued commands to complete to this
1767 * specific target (block).
1769 spin_lock_irqsave(&sdev
->list_lock
, flags
);
1770 list_for_each_entry(cmd
, &sdev
->cmd_list
, list
)
1771 if (cmd
->SCp
.phase
== AAC_OWNER_FIRMWARE
) {
1775 if (cmd
->cmnd
[0] == WRITE_6
) {
1776 cmnd_lba
= ((cmd
->cmnd
[1] & 0x1F) << 16) |
1777 (cmd
->cmnd
[2] << 8) |
1779 cmnd_count
= cmd
->cmnd
[4];
1780 if (cmnd_count
== 0)
1782 } else if (cmd
->cmnd
[0] == WRITE_16
) {
1783 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 56) |
1784 ((u64
)cmd
->cmnd
[3] << 48) |
1785 ((u64
)cmd
->cmnd
[4] << 40) |
1786 ((u64
)cmd
->cmnd
[5] << 32) |
1787 ((u64
)cmd
->cmnd
[6] << 24) |
1788 (cmd
->cmnd
[7] << 16) |
1789 (cmd
->cmnd
[8] << 8) |
1791 cmnd_count
= (cmd
->cmnd
[10] << 24) |
1792 (cmd
->cmnd
[11] << 16) |
1793 (cmd
->cmnd
[12] << 8) |
1795 } else if (cmd
->cmnd
[0] == WRITE_12
) {
1796 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 24) |
1797 (cmd
->cmnd
[3] << 16) |
1798 (cmd
->cmnd
[4] << 8) |
1800 cmnd_count
= (cmd
->cmnd
[6] << 24) |
1801 (cmd
->cmnd
[7] << 16) |
1802 (cmd
->cmnd
[8] << 8) |
1804 } else if (cmd
->cmnd
[0] == WRITE_10
) {
1805 cmnd_lba
= ((u64
)cmd
->cmnd
[2] << 24) |
1806 (cmd
->cmnd
[3] << 16) |
1807 (cmd
->cmnd
[4] << 8) |
1809 cmnd_count
= (cmd
->cmnd
[7] << 8) |
1813 if (((cmnd_lba
+ cmnd_count
) < lba
) ||
1814 (count
&& ((lba
+ count
) < cmnd_lba
)))
1820 spin_unlock_irqrestore(&sdev
->list_lock
, flags
);
1823 * Yield the processor (requeue for later)
1826 return SCSI_MLQUEUE_DEVICE_BUSY
;
1828 aac
= (struct aac_dev
*)sdev
->host
->hostdata
;
1830 return SCSI_MLQUEUE_HOST_BUSY
;
1833 * Allocate and initialize a Fib
1835 if (!(cmd_fibcontext
= aac_fib_alloc(aac
)))
1836 return SCSI_MLQUEUE_HOST_BUSY
;
1838 aac_fib_init(cmd_fibcontext
);
1840 synchronizecmd
= fib_data(cmd_fibcontext
);
1841 synchronizecmd
->command
= cpu_to_le32(VM_ContainerConfig
);
1842 synchronizecmd
->type
= cpu_to_le32(CT_FLUSH_CACHE
);
1843 synchronizecmd
->cid
= cpu_to_le32(scmd_id(scsicmd
));
1844 synchronizecmd
->count
=
1845 cpu_to_le32(sizeof(((struct aac_synchronize_reply
*)NULL
)->data
));
1848 * Now send the Fib to the adapter
1850 status
= aac_fib_send(ContainerCommand
,
1852 sizeof(struct aac_synchronize
),
1855 (fib_callback
)synchronize_callback
,
1859 * Check that the command queued to the controller
1861 if (status
== -EINPROGRESS
) {
1862 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
1867 "aac_synchronize: aac_fib_send failed with status: %d.\n", status
);
1868 aac_fib_complete(cmd_fibcontext
);
1869 aac_fib_free(cmd_fibcontext
);
1870 return SCSI_MLQUEUE_HOST_BUSY
;
1874 * aac_scsi_cmd() - Process SCSI command
1875 * @scsicmd: SCSI command block
1877 * Emulate a SCSI command and queue the required request for the
1881 int aac_scsi_cmd(struct scsi_cmnd
* scsicmd
)
1884 struct Scsi_Host
*host
= scsicmd
->device
->host
;
1885 struct aac_dev
*dev
= (struct aac_dev
*)host
->hostdata
;
1886 struct fsa_dev_info
*fsa_dev_ptr
= dev
->fsa_dev
;
1888 if (fsa_dev_ptr
== NULL
)
1891 * If the bus, id or lun is out of range, return fail
1892 * Test does not apply to ID 16, the pseudo id for the controller
1895 cid
= scmd_id(scsicmd
);
1896 if (cid
!= host
->this_id
) {
1897 if (scmd_channel(scsicmd
) == CONTAINER_CHANNEL
) {
1898 if((cid
>= dev
->maximum_num_containers
) ||
1899 (scsicmd
->device
->lun
!= 0)) {
1900 scsicmd
->result
= DID_NO_CONNECT
<< 16;
1901 scsicmd
->scsi_done(scsicmd
);
1906 * If the target container doesn't exist, it may have
1907 * been newly created
1909 if ((fsa_dev_ptr
[cid
].valid
& 1) == 0) {
1910 switch (scsicmd
->cmnd
[0]) {
1911 case SERVICE_ACTION_IN
:
1912 if (!(dev
->raw_io_interface
) ||
1913 !(dev
->raw_io_64
) ||
1914 ((scsicmd
->cmnd
[1] & 0x1f) != SAI_READ_CAPACITY_16
))
1918 case TEST_UNIT_READY
:
1921 return _aac_probe_container(scsicmd
,
1922 aac_probe_container_callback2
);
1927 } else { /* check for physical non-dasd devices */
1928 if (dev
->nondasd_support
|| expose_physicals
||
1932 return aac_send_srb_fib(scsicmd
);
1934 scsicmd
->result
= DID_NO_CONNECT
<< 16;
1935 scsicmd
->scsi_done(scsicmd
);
1941 * else Command for the controller itself
1943 else if ((scsicmd
->cmnd
[0] != INQUIRY
) && /* only INQUIRY & TUR cmnd supported for controller */
1944 (scsicmd
->cmnd
[0] != TEST_UNIT_READY
))
1946 dprintk((KERN_WARNING
"Only INQUIRY & TUR command supported for controller, rcvd = 0x%x.\n", scsicmd
->cmnd
[0]));
1947 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
1948 set_sense((u8
*) &dev
->fsa_dev
[cid
].sense_data
,
1950 SENCODE_INVALID_COMMAND
,
1951 ASENCODE_INVALID_COMMAND
, 0, 0, 0, 0);
1952 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
1953 min_t(size_t, sizeof(dev
->fsa_dev
[cid
].sense_data
),
1954 SCSI_SENSE_BUFFERSIZE
));
1955 scsicmd
->scsi_done(scsicmd
);
1960 /* Handle commands here that don't really require going out to the adapter */
1961 switch (scsicmd
->cmnd
[0]) {
1964 struct inquiry_data inq_data
;
1966 dprintk((KERN_DEBUG
"INQUIRY command, ID: %d.\n", cid
));
1967 memset(&inq_data
, 0, sizeof (struct inquiry_data
));
1969 if (scsicmd
->cmnd
[1] & 0x1) {
1970 char *arr
= (char *)&inq_data
;
1973 arr
[0] = (scmd_id(scsicmd
) == host
->this_id
) ?
1974 INQD_PDT_PROC
: INQD_PDT_DA
;
1975 if (scsicmd
->cmnd
[2] == 0) {
1976 /* supported vital product data pages */
1980 arr
[1] = scsicmd
->cmnd
[2];
1981 aac_internal_transfer(scsicmd
, &inq_data
, 0,
1983 scsicmd
->result
= DID_OK
<< 16 |
1984 COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
1985 } else if (scsicmd
->cmnd
[2] == 0x80) {
1986 /* unit serial number page */
1987 arr
[3] = setinqserial(dev
, &arr
[4],
1989 arr
[1] = scsicmd
->cmnd
[2];
1990 aac_internal_transfer(scsicmd
, &inq_data
, 0,
1992 return aac_get_container_serial(scsicmd
);
1994 /* vpd page not implemented */
1995 scsicmd
->result
= DID_OK
<< 16 |
1996 COMMAND_COMPLETE
<< 8 |
1997 SAM_STAT_CHECK_CONDITION
;
1998 set_sense((u8
*) &dev
->fsa_dev
[cid
].sense_data
,
2000 SENCODE_INVALID_CDB_FIELD
,
2001 ASENCODE_NO_SENSE
, 0, 7, 2, 0);
2002 memcpy(scsicmd
->sense_buffer
,
2003 &dev
->fsa_dev
[cid
].sense_data
,
2005 sizeof(dev
->fsa_dev
[cid
].sense_data
),
2006 SCSI_SENSE_BUFFERSIZE
));
2008 scsicmd
->scsi_done(scsicmd
);
2011 inq_data
.inqd_ver
= 2; /* claim compliance to SCSI-2 */
2012 inq_data
.inqd_rdf
= 2; /* A response data format value of two indicates that the data shall be in the format specified in SCSI-2 */
2013 inq_data
.inqd_len
= 31;
2014 /*Format for "pad2" is RelAdr | WBus32 | WBus16 | Sync | Linked |Reserved| CmdQue | SftRe */
2015 inq_data
.inqd_pad2
= 0x32 ; /*WBus16|Sync|CmdQue */
2017 * Set the Vendor, Product, and Revision Level
2018 * see: <vendor>.c i.e. aac.c
2020 if (cid
== host
->this_id
) {
2021 setinqstr(dev
, (void *) (inq_data
.inqd_vid
), ARRAY_SIZE(container_types
));
2022 inq_data
.inqd_pdt
= INQD_PDT_PROC
; /* Processor device */
2023 aac_internal_transfer(scsicmd
, &inq_data
, 0, sizeof(inq_data
));
2024 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2025 scsicmd
->scsi_done(scsicmd
);
2030 setinqstr(dev
, (void *) (inq_data
.inqd_vid
), fsa_dev_ptr
[cid
].type
);
2031 inq_data
.inqd_pdt
= INQD_PDT_DA
; /* Direct/random access device */
2032 aac_internal_transfer(scsicmd
, &inq_data
, 0, sizeof(inq_data
));
2033 return aac_get_container_name(scsicmd
);
2035 case SERVICE_ACTION_IN
:
2036 if (!(dev
->raw_io_interface
) ||
2037 !(dev
->raw_io_64
) ||
2038 ((scsicmd
->cmnd
[1] & 0x1f) != SAI_READ_CAPACITY_16
))
2044 dprintk((KERN_DEBUG
"READ CAPACITY_16 command.\n"));
2045 capacity
= fsa_dev_ptr
[cid
].size
- 1;
2046 cp
[0] = (capacity
>> 56) & 0xff;
2047 cp
[1] = (capacity
>> 48) & 0xff;
2048 cp
[2] = (capacity
>> 40) & 0xff;
2049 cp
[3] = (capacity
>> 32) & 0xff;
2050 cp
[4] = (capacity
>> 24) & 0xff;
2051 cp
[5] = (capacity
>> 16) & 0xff;
2052 cp
[6] = (capacity
>> 8) & 0xff;
2053 cp
[7] = (capacity
>> 0) & 0xff;
2059 aac_internal_transfer(scsicmd
, cp
, 0,
2060 min_t(size_t, scsicmd
->cmnd
[13], sizeof(cp
)));
2061 if (sizeof(cp
) < scsicmd
->cmnd
[13]) {
2062 unsigned int len
, offset
= sizeof(cp
);
2064 memset(cp
, 0, offset
);
2066 len
= min_t(size_t, scsicmd
->cmnd
[13] - offset
,
2068 aac_internal_transfer(scsicmd
, cp
, offset
, len
);
2069 } while ((offset
+= len
) < scsicmd
->cmnd
[13]);
2072 /* Do not cache partition table for arrays */
2073 scsicmd
->device
->removable
= 1;
2075 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2076 scsicmd
->scsi_done(scsicmd
);
2086 dprintk((KERN_DEBUG
"READ CAPACITY command.\n"));
2087 if (fsa_dev_ptr
[cid
].size
<= 0x100000000ULL
)
2088 capacity
= fsa_dev_ptr
[cid
].size
- 1;
2092 cp
[0] = (capacity
>> 24) & 0xff;
2093 cp
[1] = (capacity
>> 16) & 0xff;
2094 cp
[2] = (capacity
>> 8) & 0xff;
2095 cp
[3] = (capacity
>> 0) & 0xff;
2100 aac_internal_transfer(scsicmd
, cp
, 0, sizeof(cp
));
2101 /* Do not cache partition table for arrays */
2102 scsicmd
->device
->removable
= 1;
2104 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2105 scsicmd
->scsi_done(scsicmd
);
2113 int mode_buf_length
= 4;
2115 dprintk((KERN_DEBUG
"MODE SENSE command.\n"));
2116 mode_buf
[0] = 3; /* Mode data length */
2117 mode_buf
[1] = 0; /* Medium type - default */
2118 mode_buf
[2] = 0; /* Device-specific param,
2119 bit 8: 0/1 = write enabled/protected
2120 bit 4: 0/1 = FUA enabled */
2121 if (dev
->raw_io_interface
&& ((aac_cache
& 5) != 1))
2123 mode_buf
[3] = 0; /* Block descriptor length */
2124 if (((scsicmd
->cmnd
[2] & 0x3f) == 8) ||
2125 ((scsicmd
->cmnd
[2] & 0x3f) == 0x3f)) {
2129 mode_buf
[6] = ((aac_cache
& 6) == 2)
2130 ? 0 : 0x04; /* WCE */
2131 mode_buf_length
= 7;
2132 if (mode_buf_length
> scsicmd
->cmnd
[4])
2133 mode_buf_length
= scsicmd
->cmnd
[4];
2135 aac_internal_transfer(scsicmd
, mode_buf
, 0, mode_buf_length
);
2136 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2137 scsicmd
->scsi_done(scsicmd
);
2144 int mode_buf_length
= 8;
2146 dprintk((KERN_DEBUG
"MODE SENSE 10 byte command.\n"));
2147 mode_buf
[0] = 0; /* Mode data length (MSB) */
2148 mode_buf
[1] = 6; /* Mode data length (LSB) */
2149 mode_buf
[2] = 0; /* Medium type - default */
2150 mode_buf
[3] = 0; /* Device-specific param,
2151 bit 8: 0/1 = write enabled/protected
2152 bit 4: 0/1 = FUA enabled */
2153 if (dev
->raw_io_interface
&& ((aac_cache
& 5) != 1))
2155 mode_buf
[4] = 0; /* reserved */
2156 mode_buf
[5] = 0; /* reserved */
2157 mode_buf
[6] = 0; /* Block descriptor length (MSB) */
2158 mode_buf
[7] = 0; /* Block descriptor length (LSB) */
2159 if (((scsicmd
->cmnd
[2] & 0x3f) == 8) ||
2160 ((scsicmd
->cmnd
[2] & 0x3f) == 0x3f)) {
2164 mode_buf
[10] = ((aac_cache
& 6) == 2)
2165 ? 0 : 0x04; /* WCE */
2166 mode_buf_length
= 11;
2167 if (mode_buf_length
> scsicmd
->cmnd
[8])
2168 mode_buf_length
= scsicmd
->cmnd
[8];
2170 aac_internal_transfer(scsicmd
, mode_buf
, 0, mode_buf_length
);
2172 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2173 scsicmd
->scsi_done(scsicmd
);
2178 dprintk((KERN_DEBUG
"REQUEST SENSE command.\n"));
2179 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
, sizeof (struct sense_data
));
2180 memset(&dev
->fsa_dev
[cid
].sense_data
, 0, sizeof (struct sense_data
));
2181 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2182 scsicmd
->scsi_done(scsicmd
);
2185 case ALLOW_MEDIUM_REMOVAL
:
2186 dprintk((KERN_DEBUG
"LOCK command.\n"));
2187 if (scsicmd
->cmnd
[4])
2188 fsa_dev_ptr
[cid
].locked
= 1;
2190 fsa_dev_ptr
[cid
].locked
= 0;
2192 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2193 scsicmd
->scsi_done(scsicmd
);
2196 * These commands are all No-Ops
2198 case TEST_UNIT_READY
:
2202 case REASSIGN_BLOCKS
:
2205 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2206 scsicmd
->scsi_done(scsicmd
);
2210 switch (scsicmd
->cmnd
[0])
2219 * Hack to keep track of ordinal number of the device that
2220 * corresponds to a container. Needed to convert
2221 * containers to /dev/sd device names
2224 if (scsicmd
->request
->rq_disk
)
2225 strlcpy(fsa_dev_ptr
[cid
].devname
,
2226 scsicmd
->request
->rq_disk
->disk_name
,
2227 min(sizeof(fsa_dev_ptr
[cid
].devname
),
2228 sizeof(scsicmd
->request
->rq_disk
->disk_name
) + 1));
2230 return aac_read(scsicmd
);
2238 return aac_write(scsicmd
);
2240 case SYNCHRONIZE_CACHE
:
2241 if (((aac_cache
& 6) == 6) && dev
->cache_protected
) {
2242 scsicmd
->result
= DID_OK
<< 16 |
2243 COMMAND_COMPLETE
<< 8 | SAM_STAT_GOOD
;
2244 scsicmd
->scsi_done(scsicmd
);
2247 /* Issue FIB to tell Firmware to flush it's cache */
2248 if ((aac_cache
& 6) != 2)
2249 return aac_synchronize(scsicmd
);
2253 * Unhandled commands
2255 dprintk((KERN_WARNING
"Unhandled SCSI Command: 0x%x.\n", scsicmd
->cmnd
[0]));
2256 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
2257 set_sense((u8
*) &dev
->fsa_dev
[cid
].sense_data
,
2258 ILLEGAL_REQUEST
, SENCODE_INVALID_COMMAND
,
2259 ASENCODE_INVALID_COMMAND
, 0, 0, 0, 0);
2260 memcpy(scsicmd
->sense_buffer
, &dev
->fsa_dev
[cid
].sense_data
,
2262 sizeof(dev
->fsa_dev
[cid
].sense_data
),
2263 SCSI_SENSE_BUFFERSIZE
));
2264 scsicmd
->scsi_done(scsicmd
);
2269 static int query_disk(struct aac_dev
*dev
, void __user
*arg
)
2271 struct aac_query_disk qd
;
2272 struct fsa_dev_info
*fsa_dev_ptr
;
2274 fsa_dev_ptr
= dev
->fsa_dev
;
2277 if (copy_from_user(&qd
, arg
, sizeof (struct aac_query_disk
)))
2281 else if ((qd
.bus
== -1) && (qd
.id
== -1) && (qd
.lun
== -1))
2283 if (qd
.cnum
< 0 || qd
.cnum
>= dev
->maximum_num_containers
)
2285 qd
.instance
= dev
->scsi_host_ptr
->host_no
;
2287 qd
.id
= CONTAINER_TO_ID(qd
.cnum
);
2288 qd
.lun
= CONTAINER_TO_LUN(qd
.cnum
);
2290 else return -EINVAL
;
2292 qd
.valid
= fsa_dev_ptr
[qd
.cnum
].valid
!= 0;
2293 qd
.locked
= fsa_dev_ptr
[qd
.cnum
].locked
;
2294 qd
.deleted
= fsa_dev_ptr
[qd
.cnum
].deleted
;
2296 if (fsa_dev_ptr
[qd
.cnum
].devname
[0] == '\0')
2301 strlcpy(qd
.name
, fsa_dev_ptr
[qd
.cnum
].devname
,
2302 min(sizeof(qd
.name
), sizeof(fsa_dev_ptr
[qd
.cnum
].devname
) + 1));
2304 if (copy_to_user(arg
, &qd
, sizeof (struct aac_query_disk
)))
2309 static int force_delete_disk(struct aac_dev
*dev
, void __user
*arg
)
2311 struct aac_delete_disk dd
;
2312 struct fsa_dev_info
*fsa_dev_ptr
;
2314 fsa_dev_ptr
= dev
->fsa_dev
;
2318 if (copy_from_user(&dd
, arg
, sizeof (struct aac_delete_disk
)))
2321 if (dd
.cnum
>= dev
->maximum_num_containers
)
2324 * Mark this container as being deleted.
2326 fsa_dev_ptr
[dd
.cnum
].deleted
= 1;
2328 * Mark the container as no longer valid
2330 fsa_dev_ptr
[dd
.cnum
].valid
= 0;
2334 static int delete_disk(struct aac_dev
*dev
, void __user
*arg
)
2336 struct aac_delete_disk dd
;
2337 struct fsa_dev_info
*fsa_dev_ptr
;
2339 fsa_dev_ptr
= dev
->fsa_dev
;
2343 if (copy_from_user(&dd
, arg
, sizeof (struct aac_delete_disk
)))
2346 if (dd
.cnum
>= dev
->maximum_num_containers
)
2349 * If the container is locked, it can not be deleted by the API.
2351 if (fsa_dev_ptr
[dd
.cnum
].locked
)
2355 * Mark the container as no longer being valid.
2357 fsa_dev_ptr
[dd
.cnum
].valid
= 0;
2358 fsa_dev_ptr
[dd
.cnum
].devname
[0] = '\0';
2363 int aac_dev_ioctl(struct aac_dev
*dev
, int cmd
, void __user
*arg
)
2366 case FSACTL_QUERY_DISK
:
2367 return query_disk(dev
, arg
);
2368 case FSACTL_DELETE_DISK
:
2369 return delete_disk(dev
, arg
);
2370 case FSACTL_FORCE_DELETE_DISK
:
2371 return force_delete_disk(dev
, arg
);
2372 case FSACTL_GET_CONTAINERS
:
2373 return aac_get_containers(dev
);
2382 * @context: the context set in the fib - here it is scsi cmd
2383 * @fibptr: pointer to the fib
2385 * Handles the completion of a scsi command to a non dasd device
2389 static void aac_srb_callback(void *context
, struct fib
* fibptr
)
2391 struct aac_dev
*dev
;
2392 struct aac_srb_reply
*srbreply
;
2393 struct scsi_cmnd
*scsicmd
;
2395 scsicmd
= (struct scsi_cmnd
*) context
;
2397 if (!aac_valid_context(scsicmd
, fibptr
))
2400 BUG_ON(fibptr
== NULL
);
2404 srbreply
= (struct aac_srb_reply
*) fib_data(fibptr
);
2406 scsicmd
->sense_buffer
[0] = '\0'; /* Initialize sense valid flag to false */
2408 * Calculate resid for sg
2411 scsi_set_resid(scsicmd
, scsi_bufflen(scsicmd
)
2412 - le32_to_cpu(srbreply
->data_xfer_length
));
2414 scsi_dma_unmap(scsicmd
);
2417 * First check the fib status
2420 if (le32_to_cpu(srbreply
->status
) != ST_OK
){
2422 printk(KERN_WARNING
"aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply
->status
));
2423 len
= min_t(u32
, le32_to_cpu(srbreply
->sense_data_size
),
2424 SCSI_SENSE_BUFFERSIZE
);
2425 scsicmd
->result
= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8 | SAM_STAT_CHECK_CONDITION
;
2426 memcpy(scsicmd
->sense_buffer
, srbreply
->sense_data
, len
);
2430 * Next check the srb status
2432 switch( (le32_to_cpu(srbreply
->srb_status
))&0x3f){
2433 case SRB_STATUS_ERROR_RECOVERY
:
2434 case SRB_STATUS_PENDING
:
2435 case SRB_STATUS_SUCCESS
:
2436 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
2438 case SRB_STATUS_DATA_OVERRUN
:
2439 switch(scsicmd
->cmnd
[0]){
2448 if (le32_to_cpu(srbreply
->data_xfer_length
) < scsicmd
->underflow
) {
2449 printk(KERN_WARNING
"aacraid: SCSI CMD underflow\n");
2451 printk(KERN_WARNING
"aacraid: SCSI CMD Data Overrun\n");
2453 scsicmd
->result
= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8;
2456 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
2460 scsicmd
->result
= DID_OK
<< 16 | COMMAND_COMPLETE
<< 8;
2464 case SRB_STATUS_ABORTED
:
2465 scsicmd
->result
= DID_ABORT
<< 16 | ABORT
<< 8;
2467 case SRB_STATUS_ABORT_FAILED
:
2468 // Not sure about this one - but assuming the hba was trying to abort for some reason
2469 scsicmd
->result
= DID_ERROR
<< 16 | ABORT
<< 8;
2471 case SRB_STATUS_PARITY_ERROR
:
2472 scsicmd
->result
= DID_PARITY
<< 16 | MSG_PARITY_ERROR
<< 8;
2474 case SRB_STATUS_NO_DEVICE
:
2475 case SRB_STATUS_INVALID_PATH_ID
:
2476 case SRB_STATUS_INVALID_TARGET_ID
:
2477 case SRB_STATUS_INVALID_LUN
:
2478 case SRB_STATUS_SELECTION_TIMEOUT
:
2479 scsicmd
->result
= DID_NO_CONNECT
<< 16 | COMMAND_COMPLETE
<< 8;
2482 case SRB_STATUS_COMMAND_TIMEOUT
:
2483 case SRB_STATUS_TIMEOUT
:
2484 scsicmd
->result
= DID_TIME_OUT
<< 16 | COMMAND_COMPLETE
<< 8;
2487 case SRB_STATUS_BUSY
:
2488 scsicmd
->result
= DID_BUS_BUSY
<< 16 | COMMAND_COMPLETE
<< 8;
2491 case SRB_STATUS_BUS_RESET
:
2492 scsicmd
->result
= DID_RESET
<< 16 | COMMAND_COMPLETE
<< 8;
2495 case SRB_STATUS_MESSAGE_REJECTED
:
2496 scsicmd
->result
= DID_ERROR
<< 16 | MESSAGE_REJECT
<< 8;
2498 case SRB_STATUS_REQUEST_FLUSHED
:
2499 case SRB_STATUS_ERROR
:
2500 case SRB_STATUS_INVALID_REQUEST
:
2501 case SRB_STATUS_REQUEST_SENSE_FAILED
:
2502 case SRB_STATUS_NO_HBA
:
2503 case SRB_STATUS_UNEXPECTED_BUS_FREE
:
2504 case SRB_STATUS_PHASE_SEQUENCE_FAILURE
:
2505 case SRB_STATUS_BAD_SRB_BLOCK_LENGTH
:
2506 case SRB_STATUS_DELAYED_RETRY
:
2507 case SRB_STATUS_BAD_FUNCTION
:
2508 case SRB_STATUS_NOT_STARTED
:
2509 case SRB_STATUS_NOT_IN_USE
:
2510 case SRB_STATUS_FORCE_ABORT
:
2511 case SRB_STATUS_DOMAIN_VALIDATION_FAIL
:
2513 #ifdef AAC_DETAILED_STATUS_INFO
2514 printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
2515 le32_to_cpu(srbreply
->srb_status
) & 0x3F,
2516 aac_get_status_string(
2517 le32_to_cpu(srbreply
->srb_status
) & 0x3F),
2519 le32_to_cpu(srbreply
->scsi_status
));
2521 scsicmd
->result
= DID_ERROR
<< 16 | COMMAND_COMPLETE
<< 8;
2524 if (le32_to_cpu(srbreply
->scsi_status
) == SAM_STAT_CHECK_CONDITION
) {
2526 scsicmd
->result
|= SAM_STAT_CHECK_CONDITION
;
2527 len
= min_t(u32
, le32_to_cpu(srbreply
->sense_data_size
),
2528 SCSI_SENSE_BUFFERSIZE
);
2529 #ifdef AAC_DETAILED_STATUS_INFO
2530 printk(KERN_WARNING
"aac_srb_callback: check condition, status = %d len=%d\n",
2531 le32_to_cpu(srbreply
->status
), len
);
2533 memcpy(scsicmd
->sense_buffer
, srbreply
->sense_data
, len
);
2536 * OR in the scsi status (already shifted up a bit)
2538 scsicmd
->result
|= le32_to_cpu(srbreply
->scsi_status
);
2540 aac_fib_complete(fibptr
);
2541 aac_fib_free(fibptr
);
2542 scsicmd
->scsi_done(scsicmd
);
2548 * @scsicmd: the scsi command block
2550 * This routine will form a FIB and fill in the aac_srb from the
2551 * scsicmd passed in.
2554 static int aac_send_srb_fib(struct scsi_cmnd
* scsicmd
)
2556 struct fib
* cmd_fibcontext
;
2557 struct aac_dev
* dev
;
2560 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2561 if (scmd_id(scsicmd
) >= dev
->maximum_num_physicals
||
2562 scsicmd
->device
->lun
> 7) {
2563 scsicmd
->result
= DID_NO_CONNECT
<< 16;
2564 scsicmd
->scsi_done(scsicmd
);
2569 * Allocate and initialize a Fib then setup a BlockWrite command
2571 if (!(cmd_fibcontext
= aac_fib_alloc(dev
))) {
2574 status
= aac_adapter_scsi(cmd_fibcontext
, scsicmd
);
2577 * Check that the command queued to the controller
2579 if (status
== -EINPROGRESS
) {
2580 scsicmd
->SCp
.phase
= AAC_OWNER_FIRMWARE
;
2584 printk(KERN_WARNING
"aac_srb: aac_fib_send failed with status: %d\n", status
);
2585 aac_fib_complete(cmd_fibcontext
);
2586 aac_fib_free(cmd_fibcontext
);
2591 static unsigned long aac_build_sg(struct scsi_cmnd
* scsicmd
, struct sgmap
* psg
)
2593 struct aac_dev
*dev
;
2594 unsigned long byte_count
= 0;
2597 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2598 // Get rid of old data
2600 psg
->sg
[0].addr
= 0;
2601 psg
->sg
[0].count
= 0;
2603 nseg
= scsi_dma_map(scsicmd
);
2606 struct scatterlist
*sg
;
2609 psg
->count
= cpu_to_le32(nseg
);
2611 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
2612 psg
->sg
[i
].addr
= cpu_to_le32(sg_dma_address(sg
));
2613 psg
->sg
[i
].count
= cpu_to_le32(sg_dma_len(sg
));
2614 byte_count
+= sg_dma_len(sg
);
2616 /* hba wants the size to be exact */
2617 if (byte_count
> scsi_bufflen(scsicmd
)) {
2618 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
2619 (byte_count
- scsi_bufflen(scsicmd
));
2620 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
2621 byte_count
= scsi_bufflen(scsicmd
);
2623 /* Check for command underflow */
2624 if(scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)){
2625 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
2626 byte_count
, scsicmd
->underflow
);
2633 static unsigned long aac_build_sg64(struct scsi_cmnd
* scsicmd
, struct sgmap64
* psg
)
2635 struct aac_dev
*dev
;
2636 unsigned long byte_count
= 0;
2640 dev
= (struct aac_dev
*)scsicmd
->device
->host
->hostdata
;
2641 // Get rid of old data
2643 psg
->sg
[0].addr
[0] = 0;
2644 psg
->sg
[0].addr
[1] = 0;
2645 psg
->sg
[0].count
= 0;
2647 nseg
= scsi_dma_map(scsicmd
);
2650 struct scatterlist
*sg
;
2653 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
2654 int count
= sg_dma_len(sg
);
2655 addr
= sg_dma_address(sg
);
2656 psg
->sg
[i
].addr
[0] = cpu_to_le32(addr
& 0xffffffff);
2657 psg
->sg
[i
].addr
[1] = cpu_to_le32(addr
>>32);
2658 psg
->sg
[i
].count
= cpu_to_le32(count
);
2659 byte_count
+= count
;
2661 psg
->count
= cpu_to_le32(nseg
);
2662 /* hba wants the size to be exact */
2663 if (byte_count
> scsi_bufflen(scsicmd
)) {
2664 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
2665 (byte_count
- scsi_bufflen(scsicmd
));
2666 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
2667 byte_count
= scsi_bufflen(scsicmd
);
2669 /* Check for command underflow */
2670 if(scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)){
2671 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
2672 byte_count
, scsicmd
->underflow
);
2678 static unsigned long aac_build_sgraw(struct scsi_cmnd
* scsicmd
, struct sgmapraw
* psg
)
2680 unsigned long byte_count
= 0;
2683 // Get rid of old data
2685 psg
->sg
[0].next
= 0;
2686 psg
->sg
[0].prev
= 0;
2687 psg
->sg
[0].addr
[0] = 0;
2688 psg
->sg
[0].addr
[1] = 0;
2689 psg
->sg
[0].count
= 0;
2690 psg
->sg
[0].flags
= 0;
2692 nseg
= scsi_dma_map(scsicmd
);
2695 struct scatterlist
*sg
;
2698 scsi_for_each_sg(scsicmd
, sg
, nseg
, i
) {
2699 int count
= sg_dma_len(sg
);
2700 u64 addr
= sg_dma_address(sg
);
2701 psg
->sg
[i
].next
= 0;
2702 psg
->sg
[i
].prev
= 0;
2703 psg
->sg
[i
].addr
[1] = cpu_to_le32((u32
)(addr
>>32));
2704 psg
->sg
[i
].addr
[0] = cpu_to_le32((u32
)(addr
& 0xffffffff));
2705 psg
->sg
[i
].count
= cpu_to_le32(count
);
2706 psg
->sg
[i
].flags
= 0;
2707 byte_count
+= count
;
2709 psg
->count
= cpu_to_le32(nseg
);
2710 /* hba wants the size to be exact */
2711 if (byte_count
> scsi_bufflen(scsicmd
)) {
2712 u32 temp
= le32_to_cpu(psg
->sg
[i
-1].count
) -
2713 (byte_count
- scsi_bufflen(scsicmd
));
2714 psg
->sg
[i
-1].count
= cpu_to_le32(temp
);
2715 byte_count
= scsi_bufflen(scsicmd
);
2717 /* Check for command underflow */
2718 if(scsicmd
->underflow
&& (byte_count
< scsicmd
->underflow
)){
2719 printk(KERN_WARNING
"aacraid: cmd len %08lX cmd underflow %08X\n",
2720 byte_count
, scsicmd
->underflow
);
2726 #ifdef AAC_DETAILED_STATUS_INFO
2728 struct aac_srb_status_info
{
2734 static struct aac_srb_status_info srb_status_info
[] = {
2735 { SRB_STATUS_PENDING
, "Pending Status"},
2736 { SRB_STATUS_SUCCESS
, "Success"},
2737 { SRB_STATUS_ABORTED
, "Aborted Command"},
2738 { SRB_STATUS_ABORT_FAILED
, "Abort Failed"},
2739 { SRB_STATUS_ERROR
, "Error Event"},
2740 { SRB_STATUS_BUSY
, "Device Busy"},
2741 { SRB_STATUS_INVALID_REQUEST
, "Invalid Request"},
2742 { SRB_STATUS_INVALID_PATH_ID
, "Invalid Path ID"},
2743 { SRB_STATUS_NO_DEVICE
, "No Device"},
2744 { SRB_STATUS_TIMEOUT
, "Timeout"},
2745 { SRB_STATUS_SELECTION_TIMEOUT
, "Selection Timeout"},
2746 { SRB_STATUS_COMMAND_TIMEOUT
, "Command Timeout"},
2747 { SRB_STATUS_MESSAGE_REJECTED
, "Message Rejected"},
2748 { SRB_STATUS_BUS_RESET
, "Bus Reset"},
2749 { SRB_STATUS_PARITY_ERROR
, "Parity Error"},
2750 { SRB_STATUS_REQUEST_SENSE_FAILED
,"Request Sense Failed"},
2751 { SRB_STATUS_NO_HBA
, "No HBA"},
2752 { SRB_STATUS_DATA_OVERRUN
, "Data Overrun/Data Underrun"},
2753 { SRB_STATUS_UNEXPECTED_BUS_FREE
,"Unexpected Bus Free"},
2754 { SRB_STATUS_PHASE_SEQUENCE_FAILURE
,"Phase Error"},
2755 { SRB_STATUS_BAD_SRB_BLOCK_LENGTH
,"Bad Srb Block Length"},
2756 { SRB_STATUS_REQUEST_FLUSHED
, "Request Flushed"},
2757 { SRB_STATUS_DELAYED_RETRY
, "Delayed Retry"},
2758 { SRB_STATUS_INVALID_LUN
, "Invalid LUN"},
2759 { SRB_STATUS_INVALID_TARGET_ID
, "Invalid TARGET ID"},
2760 { SRB_STATUS_BAD_FUNCTION
, "Bad Function"},
2761 { SRB_STATUS_ERROR_RECOVERY
, "Error Recovery"},
2762 { SRB_STATUS_NOT_STARTED
, "Not Started"},
2763 { SRB_STATUS_NOT_IN_USE
, "Not In Use"},
2764 { SRB_STATUS_FORCE_ABORT
, "Force Abort"},
2765 { SRB_STATUS_DOMAIN_VALIDATION_FAIL
,"Domain Validation Failure"},
2766 { 0xff, "Unknown Error"}
2769 char *aac_get_status_string(u32 status
)
2773 for (i
= 0; i
< ARRAY_SIZE(srb_status_info
); i
++)
2774 if (srb_status_info
[i
].status
== status
)
2775 return srb_status_info
[i
].str
;
2777 return "Bad Status Code";