arch/ppc/boot/simple/misc-spruce.c

   1 /*
   2  * Misc. bootloader code for IBM Spruce reference platform
   3  *
   4  * Authors: Johnnie Peters <jpeters@mvista.com>
   5  *          Matt Porter <mporter@mvista.com>
   6  *
   7  * Derived from arch/ppc/boot/prep/misc.c
   8  *
   9  * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
  10  * the terms of the GNU General Public License version 2.  This program
  11  * is licensed "as is" without any warranty of any kind, whether express
  12  * or implied.
  13  */
  14
  15 #include <linux/types.h>
  16 #include <linux/pci.h>
  17
  18 #include <asm/bootinfo.h>
  19
  20 extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
  21                                        unsigned long cksum);
  22
  23 /* Define some important locations of the Spruce. */
  24 #define SPRUCE_PCI_CONFIG_ADDR  0xfec00000
  25 #define SPRUCE_PCI_CONFIG_DATA  0xfec00004
  26
  27 /* PCI configuration space access routines. */
  28 unsigned int *pci_config_address = (unsigned int *)SPRUCE_PCI_CONFIG_ADDR;
  29 unsigned char *pci_config_data   = (unsigned char *)SPRUCE_PCI_CONFIG_DATA;
  30
  31 void cpc700_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn,
  32                              unsigned char offset, unsigned char *val)
  33 {
  34         out_le32(pci_config_address,
  35                  (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
  36
  37         *val= (in_le32((unsigned *)pci_config_data) >> (8 * (offset & 3))) & 0xff;
  38 }
  39
  40 void cpc700_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn,
  41                              unsigned char offset, unsigned char val)
  42 {
  43         out_le32(pci_config_address,
  44                  (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
  45
  46         out_8(pci_config_data + (offset&3), val);
  47 }
  48
  49 void cpc700_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn,
  50                              unsigned char offset, unsigned short *val)
  51 {
  52         out_le32(pci_config_address,
  53                  (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
  54
  55         *val= in_le16((unsigned short *)(pci_config_data + (offset&3)));
  56 }
  57
  58 void cpc700_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn,
  59                              unsigned char offset, unsigned short val)
  60 {
  61         out_le32(pci_config_address,
  62                  (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
  63
  64         out_le16((unsigned short *)(pci_config_data + (offset&3)), val);
  65 }
  66
  67 void cpc700_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn,
  68                              unsigned char offset, unsigned int *val)
  69 {
  70         out_le32(pci_config_address,
  71                  (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
  72
  73         *val= in_le32((unsigned *)pci_config_data);
  74 }
  75
  76 void cpc700_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn,
  77                              unsigned char offset, unsigned int val)
  78 {
  79         out_le32(pci_config_address,
  80                  (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
  81
  82         out_le32((unsigned *)pci_config_data, val);
  83 }
  84
  85 #define PCNET32_WIO_RDP         0x10
  86 #define PCNET32_WIO_RAP         0x12
  87 #define PCNET32_WIO_RESET       0x14
  88
  89 #define PCNET32_DWIO_RDP        0x10
  90 #define PCNET32_DWIO_RAP        0x14
  91 #define PCNET32_DWIO_RESET      0x18
  92
  93 /* Processor interface config register access */
  94 #define PIFCFGADDR 0xff500000
  95 #define PIFCFGDATA 0xff500004
  96
  97 #define PLBMIFOPT 0x18 /* PLB Master Interface Options */
  98
  99 #define MEM_MBEN        0x24
 100 #define MEM_TYPE        0x28
 101 #define MEM_B1SA        0x3c
 102 #define MEM_B1EA        0x5c
 103 #define MEM_B2SA        0x40
 104 #define MEM_B2EA        0x60
 105
 106 unsigned long
 107 get_mem_size(void)
 108 {
 109         int loop;
 110         unsigned long mem_size = 0;
 111         unsigned long mem_mben;
 112         unsigned long mem_type;
 113         unsigned long mem_start;
 114         unsigned long mem_end;
 115         volatile int *mem_addr = (int *)0xff500008;
 116         volatile int *mem_data = (int *)0xff50000c;
 117
 118         /* Get the size of memory from the memory controller. */
 119         *mem_addr = MEM_MBEN;
 120         asm("sync");
 121         mem_mben = *mem_data;
 122         asm("sync");
 123         for(loop = 0; loop < 1000; loop++);
 124
 125         *mem_addr = MEM_TYPE;
 126         asm("sync");
 127         mem_type = *mem_data;
 128         asm("sync");
 129         for(loop = 0; loop < 1000; loop++);
 130
 131         *mem_addr = MEM_TYPE;
 132         /* Confirm bank 1 has DRAM memory */
 133         if ((mem_mben & 0x40000000) &&
 134                                 ((mem_type & 0x30000000) == 0x10000000)) {
 135                 *mem_addr = MEM_B1SA;
 136                 asm("sync");
 137                 mem_start = *mem_data;
 138                 asm("sync");
 139                 for(loop = 0; loop < 1000; loop++);
 140
 141                 *mem_addr = MEM_B1EA;
 142                 asm("sync");
 143                 mem_end = *mem_data;
 144                 asm("sync");
 145                 for(loop = 0; loop < 1000; loop++);
 146
 147                 mem_size = mem_end - mem_start + 0x100000;
 148         }
 149
 150         /* Confirm bank 2 has DRAM memory */
 151         if ((mem_mben & 0x20000000) &&
 152                                 ((mem_type & 0xc000000) == 0x4000000)) {
 153                 *mem_addr = MEM_B2SA;
 154                 asm("sync");
 155                 mem_start = *mem_data;
 156                 asm("sync");
 157                 for(loop = 0; loop < 1000; loop++);
 158
 159                 *mem_addr = MEM_B2EA;
 160                 asm("sync");
 161                 mem_end = *mem_data;
 162                 asm("sync");
 163                 for(loop = 0; loop < 1000; loop++);
 164
 165                 mem_size += mem_end - mem_start + 0x100000;
 166         }
 167         return mem_size;
 168 }
 169
 170 unsigned long
 171 load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
 172                 void *ign1, void *ign2)
 173 {
 174         int csr0;
 175         int csr_id;
 176         int pci_devfn;
 177         int found_multi = 0;
 178         unsigned short vendor;
 179         unsigned short device;
 180         unsigned short command;
 181         unsigned char header_type;
 182         unsigned int bar0;
 183         volatile int *pif_addr = (int *)0xff500000;
 184         volatile int *pif_data = (int *)0xff500004;
 185
 186         /*
 187          * Gah, these firmware guys need to learn that hardware
 188          * byte swapping is evil! Disable all hardware byte
 189          * swapping so it doesn't hurt anyone.
 190          */
 191         *pif_addr = PLBMIFOPT;
 192         asm("sync");
 193         *pif_data = 0x00000000;
 194         asm("sync");
 195
 196         /* Search out and turn off the PcNet ethernet boot device. */
 197         for (pci_devfn = 1; pci_devfn < 0xff; pci_devfn++) {
 198                 if (PCI_FUNC(pci_devfn) && !found_multi)
 199                         continue;
 200
 201                 cpc700_pcibios_read_config_byte(0, pci_devfn,
 202                                 PCI_HEADER_TYPE, &header_type);
 203
 204                 if (!PCI_FUNC(pci_devfn))
 205                         found_multi = header_type & 0x80;
 206
 207                 cpc700_pcibios_read_config_word(0, pci_devfn, PCI_VENDOR_ID,
 208                                 &vendor);
 209
 210                 if (vendor != 0xffff) {
 211                         cpc700_pcibios_read_config_word(0, pci_devfn,
 212                                                 PCI_DEVICE_ID, &device);
 213
 214                         /* If this PCI device is the Lance PCNet board then turn it off */
 215                         if ((vendor == PCI_VENDOR_ID_AMD) &&
 216                                         (device == PCI_DEVICE_ID_AMD_LANCE)) {
 217
 218                                 /* Turn on I/O Space on the board. */
 219                                 cpc700_pcibios_read_config_word(0, pci_devfn,
 220                                                 PCI_COMMAND, &command);
 221                                 command |= 0x1;
 222                                 cpc700_pcibios_write_config_word(0, pci_devfn,
 223                                                 PCI_COMMAND, command);
 224
 225                                 /* Get the I/O space address */
 226                                 cpc700_pcibios_read_config_dword(0, pci_devfn,
 227                                                 PCI_BASE_ADDRESS_0, &bar0);
 228                                 bar0 &= 0xfffffffe;
 229
 230                                 /* Reset the PCNet Board */
 231                                 inl (bar0+PCNET32_DWIO_RESET);
 232                                 inw (bar0+PCNET32_WIO_RESET);
 233
 234                                 /* First do a work oriented read of csr0.  If the value is
 235                                  * 4 then this is the correct mode to access the board.
 236                                  * If not try a double word ortiented read.
 237                                  */
 238                                 outw(0, bar0 + PCNET32_WIO_RAP);
 239                                 csr0 = inw(bar0 + PCNET32_WIO_RDP);
 240
 241                                 if (csr0 == 4) {
 242                                         /* Check the Chip id register */
 243                                         outw(88, bar0 + PCNET32_WIO_RAP);
 244                                         csr_id = inw(bar0 + PCNET32_WIO_RDP);
 245
 246                                         if (csr_id) {
 247                                                 /* This is the valid mode - set the stop bit */
 248                                                 outw(0, bar0 + PCNET32_WIO_RAP);
 249                                                 outw(csr0, bar0 + PCNET32_WIO_RDP);
 250                                         }
 251                                 } else {
 252                                         outl(0, bar0 + PCNET32_DWIO_RAP);
 253                                         csr0 = inl(bar0 + PCNET32_DWIO_RDP);
 254                                         if (csr0 == 4) {
 255                                                 /* Check the Chip id register */
 256                                                 outl(88, bar0 + PCNET32_WIO_RAP);
 257                                                 csr_id = inl(bar0 + PCNET32_WIO_RDP);
 258
 259                                                 if (csr_id) {
 260                                                         /* This is the valid mode  - set the stop bit*/
 261                                                         outl(0, bar0 + PCNET32_WIO_RAP);
 262                                                         outl(csr0, bar0 + PCNET32_WIO_RDP);
 263                                                 }
 264                                         }
 265                                 }
 266                         }
 267                 }
 268         }
 269
 270         return decompress_kernel(load_addr, num_words, cksum);
 271 }