i2c-eg20t: change timeout value 50msec to 1000msec
[zen-stable.git] / drivers / scsi / qla2xxx / qla_inline.h
blob7cc4f36cd539347a68f3210d0df339c8d6db2416
1 /*
2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2011 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
6 */
8 /*
9 * qla2x00_debounce_register
10 * Debounce register.
12 * Input:
13 * port = register address.
15 * Returns:
16 * register value.
18 static __inline__ uint16_t
19 qla2x00_debounce_register(volatile uint16_t __iomem *addr)
21 volatile uint16_t first;
22 volatile uint16_t second;
24 do {
25 first = RD_REG_WORD(addr);
26 barrier();
27 cpu_relax();
28 second = RD_REG_WORD(addr);
29 } while (first != second);
31 return (first);
34 static inline void
35 qla2x00_poll(struct rsp_que *rsp)
37 unsigned long flags;
38 struct qla_hw_data *ha = rsp->hw;
39 local_irq_save(flags);
40 if (IS_QLA82XX(ha))
41 qla82xx_poll(0, rsp);
42 else
43 ha->isp_ops->intr_handler(0, rsp);
44 local_irq_restore(flags);
47 static inline uint8_t *
48 host_to_fcp_swap(uint8_t *fcp, uint32_t bsize)
50 uint32_t *ifcp = (uint32_t *) fcp;
51 uint32_t *ofcp = (uint32_t *) fcp;
52 uint32_t iter = bsize >> 2;
54 for (; iter ; iter--)
55 *ofcp++ = swab32(*ifcp++);
57 return fcp;
60 static inline int
61 qla2x00_is_reserved_id(scsi_qla_host_t *vha, uint16_t loop_id)
63 struct qla_hw_data *ha = vha->hw;
64 if (IS_FWI2_CAPABLE(ha))
65 return (loop_id > NPH_LAST_HANDLE);
67 return ((loop_id > ha->max_loop_id && loop_id < SNS_FIRST_LOOP_ID) ||
68 loop_id == MANAGEMENT_SERVER || loop_id == BROADCAST);
71 static inline void
72 qla2x00_clean_dsd_pool(struct qla_hw_data *ha, srb_t *sp)
74 struct dsd_dma *dsd_ptr, *tdsd_ptr;
76 /* clean up allocated prev pool */
77 list_for_each_entry_safe(dsd_ptr, tdsd_ptr,
78 &((struct crc_context *)sp->ctx)->dsd_list, list) {
79 dma_pool_free(ha->dl_dma_pool, dsd_ptr->dsd_addr,
80 dsd_ptr->dsd_list_dma);
81 list_del(&dsd_ptr->list);
82 kfree(dsd_ptr);
84 INIT_LIST_HEAD(&((struct crc_context *)sp->ctx)->dsd_list);
87 static inline void
88 qla2x00_set_fcport_state(fc_port_t *fcport, int state)
90 int old_state;
92 old_state = atomic_read(&fcport->state);
93 atomic_set(&fcport->state, state);
95 /* Don't print state transitions during initial allocation of fcport */
96 if (old_state && old_state != state) {
97 ql_dbg(ql_dbg_disc, fcport->vha, 0x207d,
98 "FCPort state transitioned from %s to %s - "
99 "portid=%02x%02x%02x.\n",
100 port_state_str[old_state], port_state_str[state],
101 fcport->d_id.b.domain, fcport->d_id.b.area,
102 fcport->d_id.b.al_pa);
106 static inline int
107 qla2x00_hba_err_chk_enabled(srb_t *sp)
110 * Uncomment when corresponding SCSI changes are done.
112 if (!sp->cmd->prot_chk)
113 return 0;
117 switch (scsi_get_prot_op(sp->cmd)) {
118 case SCSI_PROT_READ_STRIP:
119 case SCSI_PROT_WRITE_INSERT:
120 if (ql2xenablehba_err_chk >= 1)
121 return 1;
122 break;
123 case SCSI_PROT_READ_PASS:
124 case SCSI_PROT_WRITE_PASS:
125 if (ql2xenablehba_err_chk >= 2)
126 return 1;
127 break;
128 case SCSI_PROT_READ_INSERT:
129 case SCSI_PROT_WRITE_STRIP:
130 return 1;
132 return 0;
135 static inline int
136 qla2x00_reset_active(scsi_qla_host_t *vha)
138 scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev);
140 /* Test appropriate base-vha and vha flags. */
141 return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) ||
142 test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
143 test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
144 test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
145 test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);