OMAPDSS: VENC: fix NULL pointer dereference in DSS2 VENC sysfs debug attr on OMAP4
[zen-stable.git] / drivers / mmc / host / mmci.h
blob79e4143ab9dfa1bbe78dbb64b46cecca670addac
1 /*
2 * linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver
4 * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 */
10 #define MMCIPOWER 0x000
11 #define MCI_PWR_OFF 0x00
12 #define MCI_PWR_UP 0x02
13 #define MCI_PWR_ON 0x03
14 #define MCI_OD (1 << 6)
15 #define MCI_ROD (1 << 7)
17 * The ST Micro version does not have ROD and reuse the voltage registers
18 * for direction settings
20 #define MCI_ST_DATA2DIREN (1 << 2)
21 #define MCI_ST_CMDDIREN (1 << 3)
22 #define MCI_ST_DATA0DIREN (1 << 4)
23 #define MCI_ST_DATA31DIREN (1 << 5)
24 #define MCI_ST_FBCLKEN (1 << 7)
25 #define MCI_ST_DATA74DIREN (1 << 8)
27 #define MMCICLOCK 0x004
28 #define MCI_CLK_ENABLE (1 << 8)
29 #define MCI_CLK_PWRSAVE (1 << 9)
30 #define MCI_CLK_BYPASS (1 << 10)
31 #define MCI_4BIT_BUS (1 << 11)
33 * 8bit wide buses, hardware flow contronl, negative edges and clock inversion
34 * supported in ST Micro U300 and Ux500 versions
36 #define MCI_ST_8BIT_BUS (1 << 12)
37 #define MCI_ST_U300_HWFCEN (1 << 13)
38 #define MCI_ST_UX500_NEG_EDGE (1 << 13)
39 #define MCI_ST_UX500_HWFCEN (1 << 14)
40 #define MCI_ST_UX500_CLK_INV (1 << 15)
42 #define MMCIARGUMENT 0x008
43 #define MMCICOMMAND 0x00c
44 #define MCI_CPSM_RESPONSE (1 << 6)
45 #define MCI_CPSM_LONGRSP (1 << 7)
46 #define MCI_CPSM_INTERRUPT (1 << 8)
47 #define MCI_CPSM_PENDING (1 << 9)
48 #define MCI_CPSM_ENABLE (1 << 10)
49 #define MCI_SDIO_SUSP (1 << 11)
50 #define MCI_ENCMD_COMPL (1 << 12)
51 #define MCI_NIEN (1 << 13)
52 #define MCI_CE_ATACMD (1 << 14)
54 #define MMCIRESPCMD 0x010
55 #define MMCIRESPONSE0 0x014
56 #define MMCIRESPONSE1 0x018
57 #define MMCIRESPONSE2 0x01c
58 #define MMCIRESPONSE3 0x020
59 #define MMCIDATATIMER 0x024
60 #define MMCIDATALENGTH 0x028
61 #define MMCIDATACTRL 0x02c
62 #define MCI_DPSM_ENABLE (1 << 0)
63 #define MCI_DPSM_DIRECTION (1 << 1)
64 #define MCI_DPSM_MODE (1 << 2)
65 #define MCI_DPSM_DMAENABLE (1 << 3)
66 #define MCI_DPSM_BLOCKSIZE (1 << 4)
67 /* Control register extensions in the ST Micro U300 and Ux500 versions */
68 #define MCI_ST_DPSM_RWSTART (1 << 8)
69 #define MCI_ST_DPSM_RWSTOP (1 << 9)
70 #define MCI_ST_DPSM_RWMOD (1 << 10)
71 #define MCI_ST_DPSM_SDIOEN (1 << 11)
72 /* Control register extensions in the ST Micro Ux500 versions */
73 #define MCI_ST_DPSM_DMAREQCTL (1 << 12)
74 #define MCI_ST_DPSM_DBOOTMODEEN (1 << 13)
75 #define MCI_ST_DPSM_BUSYMODE (1 << 14)
76 #define MCI_ST_DPSM_DDRMODE (1 << 15)
78 #define MMCIDATACNT 0x030
79 #define MMCISTATUS 0x034
80 #define MCI_CMDCRCFAIL (1 << 0)
81 #define MCI_DATACRCFAIL (1 << 1)
82 #define MCI_CMDTIMEOUT (1 << 2)
83 #define MCI_DATATIMEOUT (1 << 3)
84 #define MCI_TXUNDERRUN (1 << 4)
85 #define MCI_RXOVERRUN (1 << 5)
86 #define MCI_CMDRESPEND (1 << 6)
87 #define MCI_CMDSENT (1 << 7)
88 #define MCI_DATAEND (1 << 8)
89 #define MCI_STARTBITERR (1 << 9)
90 #define MCI_DATABLOCKEND (1 << 10)
91 #define MCI_CMDACTIVE (1 << 11)
92 #define MCI_TXACTIVE (1 << 12)
93 #define MCI_RXACTIVE (1 << 13)
94 #define MCI_TXFIFOHALFEMPTY (1 << 14)
95 #define MCI_RXFIFOHALFFULL (1 << 15)
96 #define MCI_TXFIFOFULL (1 << 16)
97 #define MCI_RXFIFOFULL (1 << 17)
98 #define MCI_TXFIFOEMPTY (1 << 18)
99 #define MCI_RXFIFOEMPTY (1 << 19)
100 #define MCI_TXDATAAVLBL (1 << 20)
101 #define MCI_RXDATAAVLBL (1 << 21)
102 /* Extended status bits for the ST Micro variants */
103 #define MCI_ST_SDIOIT (1 << 22)
104 #define MCI_ST_CEATAEND (1 << 23)
106 #define MMCICLEAR 0x038
107 #define MCI_CMDCRCFAILCLR (1 << 0)
108 #define MCI_DATACRCFAILCLR (1 << 1)
109 #define MCI_CMDTIMEOUTCLR (1 << 2)
110 #define MCI_DATATIMEOUTCLR (1 << 3)
111 #define MCI_TXUNDERRUNCLR (1 << 4)
112 #define MCI_RXOVERRUNCLR (1 << 5)
113 #define MCI_CMDRESPENDCLR (1 << 6)
114 #define MCI_CMDSENTCLR (1 << 7)
115 #define MCI_DATAENDCLR (1 << 8)
116 #define MCI_STARTBITERRCLR (1 << 9)
117 #define MCI_DATABLOCKENDCLR (1 << 10)
118 /* Extended status bits for the ST Micro variants */
119 #define MCI_ST_SDIOITC (1 << 22)
120 #define MCI_ST_CEATAENDC (1 << 23)
122 #define MMCIMASK0 0x03c
123 #define MCI_CMDCRCFAILMASK (1 << 0)
124 #define MCI_DATACRCFAILMASK (1 << 1)
125 #define MCI_CMDTIMEOUTMASK (1 << 2)
126 #define MCI_DATATIMEOUTMASK (1 << 3)
127 #define MCI_TXUNDERRUNMASK (1 << 4)
128 #define MCI_RXOVERRUNMASK (1 << 5)
129 #define MCI_CMDRESPENDMASK (1 << 6)
130 #define MCI_CMDSENTMASK (1 << 7)
131 #define MCI_DATAENDMASK (1 << 8)
132 #define MCI_STARTBITERRMASK (1 << 9)
133 #define MCI_DATABLOCKENDMASK (1 << 10)
134 #define MCI_CMDACTIVEMASK (1 << 11)
135 #define MCI_TXACTIVEMASK (1 << 12)
136 #define MCI_RXACTIVEMASK (1 << 13)
137 #define MCI_TXFIFOHALFEMPTYMASK (1 << 14)
138 #define MCI_RXFIFOHALFFULLMASK (1 << 15)
139 #define MCI_TXFIFOFULLMASK (1 << 16)
140 #define MCI_RXFIFOFULLMASK (1 << 17)
141 #define MCI_TXFIFOEMPTYMASK (1 << 18)
142 #define MCI_RXFIFOEMPTYMASK (1 << 19)
143 #define MCI_TXDATAAVLBLMASK (1 << 20)
144 #define MCI_RXDATAAVLBLMASK (1 << 21)
145 /* Extended status bits for the ST Micro variants */
146 #define MCI_ST_SDIOITMASK (1 << 22)
147 #define MCI_ST_CEATAENDMASK (1 << 23)
149 #define MMCIMASK1 0x040
150 #define MMCIFIFOCNT 0x048
151 #define MMCIFIFO 0x080 /* to 0x0bc */
153 #define MCI_IRQENABLE \
154 (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \
155 MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \
156 MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK)
158 /* These interrupts are directed to IRQ1 when two IRQ lines are available */
159 #define MCI_IRQ1MASK \
160 (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
161 MCI_TXFIFOHALFEMPTYMASK)
163 #define NR_SG 16
165 struct clk;
166 struct variant_data;
167 struct dma_chan;
169 struct mmci_host_next {
170 struct dma_async_tx_descriptor *dma_desc;
171 struct dma_chan *dma_chan;
172 s32 cookie;
175 struct mmci_host {
176 phys_addr_t phybase;
177 void __iomem *base;
178 struct mmc_request *mrq;
179 struct mmc_command *cmd;
180 struct mmc_data *data;
181 struct mmc_host *mmc;
182 struct clk *clk;
183 int gpio_cd;
184 int gpio_wp;
185 int gpio_cd_irq;
186 bool singleirq;
188 spinlock_t lock;
190 unsigned int mclk;
191 unsigned int cclk;
192 u32 pwr;
193 struct mmci_platform_data *plat;
194 struct variant_data *variant;
196 u8 hw_designer;
197 u8 hw_revision:4;
199 struct timer_list timer;
200 unsigned int oldstat;
202 /* pio stuff */
203 struct sg_mapping_iter sg_miter;
204 unsigned int size;
205 struct regulator *vcc;
207 #ifdef CONFIG_DMA_ENGINE
208 /* DMA stuff */
209 struct dma_chan *dma_current;
210 struct dma_chan *dma_rx_channel;
211 struct dma_chan *dma_tx_channel;
212 struct dma_async_tx_descriptor *dma_desc_current;
213 struct mmci_host_next next_data;
215 #define dma_inprogress(host) ((host)->dma_current)
216 #else
217 #define dma_inprogress(host) (0)
218 #endif