drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h

   1 /* Copyright 2008-2011 Broadcom Corporation
   2  *
   3  * Unless you and Broadcom execute a separate written software license
   4  * agreement governing use of this software, this software is licensed to you
   5  * under the terms of the GNU General Public License version 2, available
   6  * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
   7  *
   8  * Notwithstanding the above, under no circumstances may you combine this
   9  * software in any way with any other Broadcom software provided under a
  10  * license other than the GPL, without Broadcom's express prior written
  11  * consent.
  12  *
  13  * Written by Yaniv Rosner
  14  *
  15  */
  16
  17 #ifndef BNX2X_LINK_H
  18 #define BNX2X_LINK_H
  19
  20
  21
  22 /***********************************************************/
  23 /*                         Defines                         */
  24 /***********************************************************/
  25 #define DEFAULT_PHY_DEV_ADDR    3
  26 #define E2_DEFAULT_PHY_DEV_ADDR 5
  27
  28
  29
  30 #define BNX2X_FLOW_CTRL_AUTO            PORT_FEATURE_FLOW_CONTROL_AUTO
  31 #define BNX2X_FLOW_CTRL_TX              PORT_FEATURE_FLOW_CONTROL_TX
  32 #define BNX2X_FLOW_CTRL_RX              PORT_FEATURE_FLOW_CONTROL_RX
  33 #define BNX2X_FLOW_CTRL_BOTH            PORT_FEATURE_FLOW_CONTROL_BOTH
  34 #define BNX2X_FLOW_CTRL_NONE            PORT_FEATURE_FLOW_CONTROL_NONE
  35
  36 #define NET_SERDES_IF_XFI               1
  37 #define NET_SERDES_IF_SFI               2
  38 #define NET_SERDES_IF_KR                3
  39 #define NET_SERDES_IF_DXGXS     4
  40
  41 #define SPEED_AUTO_NEG          0
  42 #define SPEED_20000             20000
  43
  44 #define SFP_EEPROM_VENDOR_NAME_ADDR             0x14
  45 #define SFP_EEPROM_VENDOR_NAME_SIZE             16
  46 #define SFP_EEPROM_VENDOR_OUI_ADDR              0x25
  47 #define SFP_EEPROM_VENDOR_OUI_SIZE              3
  48 #define SFP_EEPROM_PART_NO_ADDR                 0x28
  49 #define SFP_EEPROM_PART_NO_SIZE                 16
  50 #define SFP_EEPROM_REVISION_ADDR                0x38
  51 #define SFP_EEPROM_REVISION_SIZE                4
  52 #define SFP_EEPROM_SERIAL_ADDR                  0x44
  53 #define SFP_EEPROM_SERIAL_SIZE                  16
  54 #define SFP_EEPROM_DATE_ADDR                    0x54 /* ASCII YYMMDD */
  55 #define SFP_EEPROM_DATE_SIZE                    6
  56 #define PWR_FLT_ERR_MSG_LEN                     250
  57
  58 #define XGXS_EXT_PHY_TYPE(ext_phy_config) \
  59                 ((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK)
  60 #define XGXS_EXT_PHY_ADDR(ext_phy_config) \
  61                 (((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> \
  62                  PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT)
  63 #define SERDES_EXT_PHY_TYPE(ext_phy_config) \
  64                 ((ext_phy_config) & PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK)
  65
  66 /* Single Media Direct board is the plain 577xx board with CX4/RJ45 jacks */
  67 #define SINGLE_MEDIA_DIRECT(params)     (params->num_phys == 1)
  68 /* Single Media board contains single external phy */
  69 #define SINGLE_MEDIA(params)            (params->num_phys == 2)
  70 /* Dual Media board contains two external phy with different media */
  71 #define DUAL_MEDIA(params)              (params->num_phys == 3)
  72
  73 #define FW_PARAM_PHY_ADDR_MASK          0x000000FF
  74 #define FW_PARAM_PHY_TYPE_MASK          0x0000FF00
  75 #define FW_PARAM_MDIO_CTRL_MASK         0xFFFF0000
  76 #define FW_PARAM_MDIO_CTRL_OFFSET               16
  77 #define FW_PARAM_PHY_ADDR(fw_param) (fw_param & \
  78                                            FW_PARAM_PHY_ADDR_MASK)
  79 #define FW_PARAM_PHY_TYPE(fw_param) (fw_param & \
  80                                            FW_PARAM_PHY_TYPE_MASK)
  81 #define FW_PARAM_MDIO_CTRL(fw_param) ((fw_param & \
  82                                             FW_PARAM_MDIO_CTRL_MASK) >> \
  83                                             FW_PARAM_MDIO_CTRL_OFFSET)
  84 #define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \
  85         (phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET)
  86
  87
  88 #define PFC_BRB_FULL_LB_XOFF_THRESHOLD                          170
  89 #define PFC_BRB_FULL_LB_XON_THRESHOLD                           250
  90
  91 #define MAXVAL(a, b) (((a) > (b)) ? (a) : (b))
  92 /***********************************************************/
  93 /*                         Structs                         */
  94 /***********************************************************/
  95 #define INT_PHY         0
  96 #define EXT_PHY1        1
  97 #define EXT_PHY2        2
  98 #define MAX_PHYS        3
  99
 100 /* Same configuration is shared between the XGXS and the first external phy */
 101 #define LINK_CONFIG_SIZE (MAX_PHYS - 1)
 102 #define LINK_CONFIG_IDX(_phy_idx) ((_phy_idx == INT_PHY) ? \
 103                                          0 : (_phy_idx - 1))
 104 /***********************************************************/
 105 /*                      bnx2x_phy struct                     */
 106 /*  Defines the required arguments and function per phy    */
 107 /***********************************************************/
 108 struct link_vars;
 109 struct link_params;
 110 struct bnx2x_phy;
 111
 112 typedef u8 (*config_init_t)(struct bnx2x_phy *phy, struct link_params *params,
 113                             struct link_vars *vars);
 114 typedef u8 (*read_status_t)(struct bnx2x_phy *phy, struct link_params *params,
 115                             struct link_vars *vars);
 116 typedef void (*link_reset_t)(struct bnx2x_phy *phy,
 117                              struct link_params *params);
 118 typedef void (*config_loopback_t)(struct bnx2x_phy *phy,
 119                                   struct link_params *params);
 120 typedef u8 (*format_fw_ver_t)(u32 raw, u8 *str, u16 *len);
 121 typedef void (*hw_reset_t)(struct bnx2x_phy *phy, struct link_params *params);
 122 typedef void (*set_link_led_t)(struct bnx2x_phy *phy,
 123                                struct link_params *params, u8 mode);
 124 typedef void (*phy_specific_func_t)(struct bnx2x_phy *phy,
 125                                     struct link_params *params, u32 action);
 126
 127 struct bnx2x_phy {
 128         u32 type;
 129
 130         /* Loaded during init */
 131         u8 addr;
 132         u8 def_md_devad;
 133         u16 flags;
 134         /* Require HW lock */
 135 #define FLAGS_HW_LOCK_REQUIRED          (1<<0)
 136         /* No Over-Current detection */
 137 #define FLAGS_NOC                       (1<<1)
 138         /* Fan failure detection required */
 139 #define FLAGS_FAN_FAILURE_DET_REQ       (1<<2)
 140         /* Initialize first the XGXS and only then the phy itself */
 141 #define FLAGS_INIT_XGXS_FIRST           (1<<3)
 142 #define FLAGS_WC_DUAL_MODE              (1<<4)
 143 #define FLAGS_4_PORT_MODE               (1<<5)
 144 #define FLAGS_REARM_LATCH_SIGNAL        (1<<6)
 145 #define FLAGS_SFP_NOT_APPROVED          (1<<7)
 146 #define FLAGS_MDC_MDIO_WA               (1<<8)
 147 #define FLAGS_DUMMY_READ                (1<<9)
 148 #define FLAGS_MDC_MDIO_WA_B0            (1<<10)
 149 #define FLAGS_TX_ERROR_CHECK            (1<<12)
 150
 151         /* preemphasis values for the rx side */
 152         u16 rx_preemphasis[4];
 153
 154         /* preemphasis values for the tx side */
 155         u16 tx_preemphasis[4];
 156
 157         /* EMAC address for access MDIO */
 158         u32 mdio_ctrl;
 159
 160         u32 supported;
 161
 162         u32 media_type;
 163 #define ETH_PHY_UNSPECIFIED 0x0
 164 #define ETH_PHY_SFP_FIBER   0x1
 165 #define ETH_PHY_XFP_FIBER   0x2
 166 #define ETH_PHY_DA_TWINAX   0x3
 167 #define ETH_PHY_BASE_T      0x4
 168 #define ETH_PHY_KR          0xf0
 169 #define ETH_PHY_CX4         0xf1
 170 #define ETH_PHY_NOT_PRESENT 0xff
 171
 172         /* The address in which version is located*/
 173         u32 ver_addr;
 174
 175         u16 req_flow_ctrl;
 176
 177         u16 req_line_speed;
 178
 179         u32 speed_cap_mask;
 180
 181         u16 req_duplex;
 182         u16 rsrv;
 183         /* Called per phy/port init, and it configures LASI, speed, autoneg,
 184          duplex, flow control negotiation, etc. */
 185         config_init_t config_init;
 186
 187         /* Called due to interrupt. It determines the link, speed */
 188         read_status_t read_status;
 189
 190         /* Called when driver is unloading. Should reset the phy */
 191         link_reset_t link_reset;
 192
 193         /* Set the loopback configuration for the phy */
 194         config_loopback_t config_loopback;
 195
 196         /* Format the given raw number into str up to len */
 197         format_fw_ver_t format_fw_ver;
 198
 199         /* Reset the phy (both ports) */
 200         hw_reset_t hw_reset;
 201
 202         /* Set link led mode (on/off/oper)*/
 203         set_link_led_t set_link_led;
 204
 205         /* PHY Specific tasks */
 206         phy_specific_func_t phy_specific_func;
 207 #define DISABLE_TX      1
 208 #define ENABLE_TX       2
 209 };
 210
 211 /* Inputs parameters to the CLC */
 212 struct link_params {
 213
 214         u8 port;
 215
 216         /* Default / User Configuration */
 217         u8 loopback_mode;
 218 #define LOOPBACK_NONE           0
 219 #define LOOPBACK_EMAC           1
 220 #define LOOPBACK_BMAC           2
 221 #define LOOPBACK_XGXS           3
 222 #define LOOPBACK_EXT_PHY        4
 223 #define LOOPBACK_EXT            5
 224 #define LOOPBACK_UMAC           6
 225 #define LOOPBACK_XMAC           7
 226
 227         /* Device parameters */
 228         u8 mac_addr[6];
 229
 230         u16 req_duplex[LINK_CONFIG_SIZE];
 231         u16 req_flow_ctrl[LINK_CONFIG_SIZE];
 232
 233         u16 req_line_speed[LINK_CONFIG_SIZE]; /* Also determine AutoNeg */
 234
 235         /* shmem parameters */
 236         u32 shmem_base;
 237         u32 shmem2_base;
 238         u32 speed_cap_mask[LINK_CONFIG_SIZE];
 239         u32 switch_cfg;
 240 #define SWITCH_CFG_1G           PORT_FEATURE_CON_SWITCH_1G_SWITCH
 241 #define SWITCH_CFG_10G          PORT_FEATURE_CON_SWITCH_10G_SWITCH
 242 #define SWITCH_CFG_AUTO_DETECT  PORT_FEATURE_CON_SWITCH_AUTO_DETECT
 243
 244         u32 lane_config;
 245
 246         /* Phy register parameter */
 247         u32 chip_id;
 248
 249         /* features */
 250         u32 feature_config_flags;
 251 #define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED     (1<<0)
 252 #define FEATURE_CONFIG_PFC_ENABLED                      (1<<1)
 253 #define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY         (1<<2)
 254 #define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY        (1<<3)
 255 #define FEATURE_CONFIG_AUTOGREEEN_ENABLED                       (1<<9)
 256 #define FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED              (1<<10)
 257         /* Will be populated during common init */
 258         struct bnx2x_phy phy[MAX_PHYS];
 259
 260         /* Will be populated during common init */
 261         u8 num_phys;
 262
 263         u8 rsrv;
 264         u16 hw_led_mode; /* part of the hw_config read from the shmem */
 265         u32 multi_phy_config;
 266
 267         /* Device pointer passed to all callback functions */
 268         struct bnx2x *bp;
 269         u16 req_fc_auto_adv; /* Should be set to TX / BOTH when
 270                                 req_flow_ctrl is set to AUTO */
 271 };
 272
 273 /* Output parameters */
 274 struct link_vars {
 275         u8 phy_flags;
 276 #define PHY_XGXS_FLAG                   (1<<0)
 277 #define PHY_SGMII_FLAG                  (1<<1)
 278 #define PHY_PHYSICAL_LINK_FLAG          (1<<2)
 279 #define PHY_HALF_OPEN_CONN_FLAG         (1<<3)
 280 #define PHY_OVER_CURRENT_FLAG           (1<<4)
 281
 282         u8 mac_type;
 283 #define MAC_TYPE_NONE           0
 284 #define MAC_TYPE_EMAC           1
 285 #define MAC_TYPE_BMAC           2
 286 #define MAC_TYPE_UMAC           3
 287 #define MAC_TYPE_XMAC           4
 288
 289         u8 phy_link_up; /* internal phy link indication */
 290         u8 link_up;
 291
 292         u16 line_speed;
 293         u16 duplex;
 294
 295         u16 flow_ctrl;
 296         u16 ieee_fc;
 297
 298         /* The same definitions as the shmem parameter */
 299         u32 link_status;
 300         u8 fault_detected;
 301         u8 rsrv1;
 302         u16 periodic_flags;
 303 #define PERIODIC_FLAGS_LINK_EVENT       0x0001
 304
 305         u32 aeu_int_mask;
 306         u8 rx_tx_asic_rst;
 307         u8 turn_to_run_wc_rt;
 308         u16 rsrv2;
 309 };
 310
 311 /***********************************************************/
 312 /*                         Functions                       */
 313 /***********************************************************/
 314 int bnx2x_phy_init(struct link_params *params, struct link_vars *vars);
 315
 316 /* Reset the link. Should be called when driver or interface goes down
 317    Before calling phy firmware upgrade, the reset_ext_phy should be set
 318    to 0 */
 319 int bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
 320                      u8 reset_ext_phy);
 321
 322 /* bnx2x_link_update should be called upon link interrupt */
 323 int bnx2x_link_update(struct link_params *params, struct link_vars *vars);
 324
 325 /* use the following phy functions to read/write from external_phy
 326   In order to use it to read/write internal phy registers, use
 327   DEFAULT_PHY_DEV_ADDR as devad, and (_bank + (_addr & 0xf)) as
 328   the register */
 329 int bnx2x_phy_read(struct link_params *params, u8 phy_addr,
 330                    u8 devad, u16 reg, u16 *ret_val);
 331
 332 int bnx2x_phy_write(struct link_params *params, u8 phy_addr,
 333                     u8 devad, u16 reg, u16 val);
 334
 335 /* Reads the link_status from the shmem,
 336    and update the link vars accordingly */
 337 void bnx2x_link_status_update(struct link_params *input,
 338                             struct link_vars *output);
 339 /* returns string representing the fw_version of the external phy */
 340 int bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 341                                  u8 *version, u16 len);
 342
 343 /* Set/Unset the led
 344    Basically, the CLC takes care of the led for the link, but in case one needs
 345    to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
 346    blink the led, and LED_MODE_OFF to set the led off.*/
 347 int bnx2x_set_led(struct link_params *params,
 348                   struct link_vars *vars, u8 mode, u32 speed);
 349 #define LED_MODE_OFF                    0
 350 #define LED_MODE_ON                     1
 351 #define LED_MODE_OPER                   2
 352 #define LED_MODE_FRONT_PANEL_OFF        3
 353
 354 /* bnx2x_handle_module_detect_int should be called upon module detection
 355    interrupt */
 356 void bnx2x_handle_module_detect_int(struct link_params *params);
 357
 358 /* Get the actual link status. In case it returns 0, link is up,
 359         otherwise link is down*/
 360 int bnx2x_test_link(struct link_params *params, struct link_vars *vars,
 361                     u8 is_serdes);
 362
 363 /* One-time initialization for external phy after power up */
 364 int bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[],
 365                           u32 shmem2_base_path[], u32 chip_id);
 366
 367 /* Reset the external PHY using GPIO */
 368 void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port);
 369
 370 /* Reset the external of SFX7101 */
 371 void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy);
 372
 373 /* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */
 374 int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy,
 375                                  struct link_params *params, u16 addr,
 376                                  u8 byte_cnt, u8 *o_buf);
 377
 378 void bnx2x_hw_reset_phy(struct link_params *params);
 379
 380 /* Checks if HW lock is required for this phy/board type */
 381 u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base,
 382                           u32 shmem2_base);
 383
 384 /* Check swap bit and adjust PHY order */
 385 u32 bnx2x_phy_selection(struct link_params *params);
 386
 387 /* Probe the phys on board, and populate them in "params" */
 388 int bnx2x_phy_probe(struct link_params *params);
 389
 390 /* Checks if fan failure detection is required on one of the phys on board */
 391 u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, u32 shmem_base,
 392                              u32 shmem2_base, u8 port);
 393
 394
 395
 396 /* DCBX structs */
 397
 398 /* Number of maximum COS per chip */
 399 #define DCBX_E2E3_MAX_NUM_COS           (2)
 400 #define DCBX_E3B0_MAX_NUM_COS_PORT0     (6)
 401 #define DCBX_E3B0_MAX_NUM_COS_PORT1     (3)
 402 #define DCBX_E3B0_MAX_NUM_COS           ( \
 403                         MAXVAL(DCBX_E3B0_MAX_NUM_COS_PORT0, \
 404                             DCBX_E3B0_MAX_NUM_COS_PORT1))
 405
 406 #define DCBX_MAX_NUM_COS                        ( \
 407                         MAXVAL(DCBX_E3B0_MAX_NUM_COS, \
 408                             DCBX_E2E3_MAX_NUM_COS))
 409
 410 /* PFC port configuration params */
 411 struct bnx2x_nig_brb_pfc_port_params {
 412         /* NIG */
 413         u32 pause_enable;
 414         u32 llfc_out_en;
 415         u32 llfc_enable;
 416         u32 pkt_priority_to_cos;
 417         u8 num_of_rx_cos_priority_mask;
 418         u32 rx_cos_priority_mask[DCBX_MAX_NUM_COS];
 419         u32 llfc_high_priority_classes;
 420         u32 llfc_low_priority_classes;
 421         /* BRB */
 422         u32 cos0_pauseable;
 423         u32 cos1_pauseable;
 424 };
 425
 426
 427 /* ETS port configuration params */
 428 struct bnx2x_ets_bw_params {
 429         u8 bw;
 430 };
 431
 432 struct bnx2x_ets_sp_params {
 433         /**
 434          * valid values are 0 - 5. 0 is highest strict priority.
 435          * There can't be two COS's with the same pri.
 436          */
 437         u8 pri;
 438 };
 439
 440 enum bnx2x_cos_state {
 441         bnx2x_cos_state_strict = 0,
 442         bnx2x_cos_state_bw = 1,
 443 };
 444
 445 struct bnx2x_ets_cos_params {
 446         enum bnx2x_cos_state state ;
 447         union {
 448                 struct bnx2x_ets_bw_params bw_params;
 449                 struct bnx2x_ets_sp_params sp_params;
 450         } params;
 451 };
 452
 453 struct bnx2x_ets_params {
 454         u8 num_of_cos; /* Number of valid COS entries*/
 455         struct bnx2x_ets_cos_params cos[DCBX_MAX_NUM_COS];
 456 };
 457
 458 /**
 459  * Used to update the PFC attributes in EMAC, BMAC, NIG and BRB
 460  * when link is already up
 461  */
 462 int bnx2x_update_pfc(struct link_params *params,
 463                       struct link_vars *vars,
 464                       struct bnx2x_nig_brb_pfc_port_params *pfc_params);
 465
 466
 467 /* Used to configure the ETS to disable */
 468 int bnx2x_ets_disabled(struct link_params *params,
 469                        struct link_vars *vars);
 470
 471 /* Used to configure the ETS to BW limited */
 472 void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw,
 473                         const u32 cos1_bw);
 474
 475 /* Used to configure the ETS to strict */
 476 int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos);
 477
 478
 479 /*  Configure the COS to ETS according to BW and SP settings.*/
 480 int bnx2x_ets_e3b0_config(const struct link_params *params,
 481                          const struct link_vars *vars,
 482                          struct bnx2x_ets_params *ets_params);
 483 /* Read pfc statistic*/
 484 void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars,
 485                                                  u32 pfc_frames_sent[2],
 486                                                  u32 pfc_frames_received[2]);
 487 void bnx2x_init_mod_abs_int(struct bnx2x *bp, struct link_vars *vars,
 488                             u32 chip_id, u32 shmem_base, u32 shmem2_base,
 489                             u8 port);
 490
 491 int bnx2x_sfp_module_detection(struct bnx2x_phy *phy,
 492                                struct link_params *params);
 493
 494 void bnx2x_period_func(struct link_params *params, struct link_vars *vars);
 495
 496 #endif /* BNX2X_LINK_H */